Merge branch 'develop' into t-watch-ultra

2026-01-24 18:57:43 +00:00 · 2026-01-11 11:50:06 +01:00
parent 9f8311ffd5 05bb43189e
commit b905766c6a
513 changed files with 51719 additions and 14757 deletions
--- a/variants/esp32/betafpv_2400_tx_micro/platformio.ini
+++ b/variants/esp32/betafpv_2400_tx_micro/platformio.ini
@@ -15,4 +15,5 @@ upload_protocol = esptool
 upload_speed = 460800
 lib_deps =
  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32/betafpv_900_tx_nano/platformio.ini
+++ b/variants/esp32/betafpv_900_tx_nano/platformio.ini
@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/chatter2/platformio.ini
+++ b/variants/esp32/chatter2/platformio.ini
@@ -9,4 +9,5 @@ build_flags =
  
 lib_deps =
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/chatter2/variant.h
+++ b/variants/esp32/chatter2/variant.h
@@ -62,10 +62,12 @@
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_INVERT false
+#define FORCE_LOW_RES 1
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
 #define TFT_BACKLIGHT_ON LOW
+#define USE_TFTDISPLAY 1

 // Battery

--- a/variants/esp32/diy/dr-dev/platformio.ini
+++ b/variants/esp32/diy/dr-dev/platformio.ini
@@ -1,7 +1,15 @@
 ; Port to Disaster Radio's ESP32-v3 Dev Board
 [env:meshtastic-dr-dev]
+custom_meshtastic_hw_model = 41
+custom_meshtastic_hw_model_slug = DR_DEV
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = DR-DEV
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =
--- a/variants/esp32/diy/hydra/platformio.ini
+++ b/variants/esp32/diy/hydra/platformio.ini
@@ -1,5 +1,13 @@
 ; Hydra - Meshtastic DIY v1 hardware with some specific changes
 [env:hydra]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = HYDRA
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Hydra
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =
--- a/variants/esp32/diy/v1/platformio.ini
+++ b/variants/esp32/diy/v1/platformio.ini
@@ -1,5 +1,14 @@
 ; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
 [env:meshtastic-diy-v1]
+custom_meshtastic_hw_model = 39
+custom_meshtastic_hw_model_slug = DIY_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = DIY V1
+custom_meshtastic_images = diy.svg
+custom_meshtastic_tags = DIY
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 board_check = true
--- a/variants/esp32/esp32-common.ini
+++ b/variants/esp32/esp32-common.ini
@@ -0,0 +1,87 @@
+; Common settings for ESP targets, mixin with extends = esp32_common
+[esp32_common]
+extends = arduino_base
+custom_esp32_kind =
+custom_mtjson_part =
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.12.0
+
+extra_scripts =
+  ${env.extra_scripts}
+  pre:extra_scripts/esp32_pre.py
+  extra_scripts/esp32_extra.py
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DHAS_UDP_MULTICAST=1
+  ;-DDEBUG_HEAP
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${networking_extra.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -0,0 +1,8 @@
+; Common settings for ESP32 OG (without suffix)
+; See 'esp32_common' for common ESP32-family settings
+[esp32_base]
+extends = esp32_common
+custom_esp32_kind = esp32
+
+build_flags =
+  ${esp32_common.build_flags}
--- a/variants/esp32/heltec_v1/platformio.ini
+++ b/variants/esp32/heltec_v1/platformio.ini
@@ -1,4 +1,11 @@
 [env:heltec-v1]
+custom_meshtastic_hw_model = 11
+custom_meshtastic_hw_model_slug = HELTEC_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V1
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
 board_level = extra
--- a/variants/esp32/heltec_v2.1/platformio.ini
+++ b/variants/esp32/heltec_v2.1/platformio.ini
@@ -1,4 +1,11 @@
 [env:heltec-v2_1]
+custom_meshtastic_hw_model = 10
+custom_meshtastic_hw_model_slug = HELTEC_V2_1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.1
+custom_meshtastic_tags = Heltec
+
 board_level = extra
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
--- a/variants/esp32/heltec_v2/platformio.ini
+++ b/variants/esp32/heltec_v2/platformio.ini
@@ -1,4 +1,11 @@
 [env:heltec-v2_0]
+custom_meshtastic_hw_model = 5
+custom_meshtastic_hw_model_slug = HELTEC_V2_0
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = Heltec V2.0
+custom_meshtastic_tags = Heltec
+
 ;build_type = debug ; to make it possible to step through our jtag debugger
 board_level = extra
 extends = esp32_base
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -1,4 +1,12 @@
 [env:m5stack-core]
+custom_meshtastic_hw_model = 42
+custom_meshtastic_hw_model_slug = M5STACK
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = M5 Stack
+custom_meshtastic_tags = M5Stack
+
 extends = esp32_base
 board = m5stack-core-esp32
 monitor_filters = esp32_exception_decoder
@@ -7,7 +15,6 @@ build_src_filter =
 build_flags = 
  ${esp32_base.build_flags}
  -I variants/esp32/m5stack_core
-  -DILI9341_DRIVER
  -DM5STACK
  -DUSER_SETUP_LOADED
  -DTFT_SDA_READ
@@ -26,4 +33,5 @@ lib_ignore =
  m5stack-core
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32/m5stack_core/variant.h
+++ b/variants/esp32/m5stack_core/variant.h
@@ -34,11 +34,13 @@
 #define GPS_RX_PIN 16
 #define GPS_TX_PIN 17

+#define ILI9341_DRIVER
 #define TFT_HEIGHT 240
 #define TFT_WIDTH 320
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_BUSY -1
+#define USE_TFTDISPLAY 1

 // LCD screens are slow, so slowdown the wipe so it looks better
 #define SCREEN_TRANSITION_FRAMERATE 1 // fps
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -18,8 +18,10 @@ build_flags =
  -DM5STACK
 lib_deps = 
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.3
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
--- a/variants/esp32/m5stack_coreink/variant.h
+++ b/variants/esp32/m5stack_coreink/variant.h
@@ -13,7 +13,6 @@
 #define LED_STATE_ON 1 // State when LED is lit
 #define LED_PIN 10

-#include "pcf8563.h"
 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
 #define HAS_RTC 1
--- a/variants/esp32/nano-g1-explorer/platformio.ini
+++ b/variants/esp32/nano-g1-explorer/platformio.ini
@@ -1,9 +1,15 @@
 ; The 1.0 release of the nano-g1-explorer board 
 [env:nano-g1-explorer]
+custom_meshtastic_hw_model = 17
+custom_meshtastic_hw_model_slug = NANO_G1_EXPLORER
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1 Explorer
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1_EXPLORER
--- a/variants/esp32/nano-g1/platformio.ini
+++ b/variants/esp32/nano-g1/platformio.ini
@@ -1,9 +1,15 @@
 ; The 1.0 release of the nano-g1 board 
 [env:nano-g1]
+custom_meshtastic_hw_model = 14
+custom_meshtastic_hw_model_slug = NANO_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Nano G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1
--- a/variants/esp32/radiomaster_900_bandit/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,5 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
+  # renovate: datasource=github-tags depName=STK8xxx-Accelerometer packageName=gjelsoe/STK8xxx-Accelerometer
  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
@@ -15,5 +15,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
@@ -1,4 +1,12 @@
 [env:radiomaster_900_bandit_nano]
+custom_meshtastic_hw_model = 64
+custom_meshtastic_hw_model_slug = RADIOMASTER_900_BANDIT_NANO
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = RadioMaster 900 Bandit Nano
+custom_meshtastic_tags = RadioMaster
+
 extends = esp32_base
 board = esp32doit-devkit-v1
 build_flags =
@@ -10,5 +18,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/rak11200/platformio.ini
+++ b/variants/esp32/rak11200/platformio.ini
@@ -1,4 +1,13 @@
 [env:rak11200]
+custom_meshtastic_hw_model = 13
+custom_meshtastic_hw_model_slug = RAK11200
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = RAK WisBlock 11200
+custom_meshtastic_images = rak11200.svg
+custom_meshtastic_tags = RAK
+
 extends = esp32_base
 board = wiscore_rak11200
 board_level = pr
--- a/variants/esp32/station-g1/platformio.ini
+++ b/variants/esp32/station-g1/platformio.ini
@@ -1,9 +1,15 @@
 ; The 1.0 release of the nano-g1 board 
 [env:station-g1]
+custom_meshtastic_hw_model = 25
+custom_meshtastic_hw_model_slug = STATION_G1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Station G1
+custom_meshtastic_tags = B&Q
+
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D STATION_G1
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -1,15 +1,35 @@
 ; The 1.0 release of the TBEAM board 
 [env:tbeam]
+custom_meshtastic_hw_model = 4
+custom_meshtastic_hw_model_slug = TBEAM
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Beam
+custom_meshtastic_images = tbeam.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-t-beam
-board_level = pr
+
 board_check = true
-lib_deps =
-  ${esp32_base.lib_deps}
-build_flags = 
-  ${esp32_base.build_flags}
+build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
  -DBOARD_HAS_PSRAM
  -mfix-esp32-psram-cache-issue
 upload_speed = 921600
+
+[env:tbeam-displayshield]
+extends = env:tbeam
+board_level = extra
+build_flags =
+  ${env:tbeam.build_flags}
+  -D USE_ST7796
+
+lib_deps =
+  ${env:tbeam.lib_deps}
+  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
+  https://github.com/meshtastic/st7796/archive/1.0.5.zip
+  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.3
--- a/variants/esp32/tbeam/variant.h
+++ b/variants/esp32/tbeam/variant.h
@@ -42,4 +42,35 @@
 #define GPS_UBLOX
 #define GPS_RX_PIN 34
 #define GPS_TX_PIN 12
-// #define GPS_DEBUG
+// #define GPS_DEBUG
+
+// Used when the display shield is chosen
+#ifdef USE_ST7796
+
+#undef EXT_NOTIFY_OUT
+#undef LED_STATE_ON
+#undef LED_PIN
+
+#define HAS_CST226SE 1
+#define HAS_TOUCHSCREEN 1
+// #define TOUCH_IRQ 35 // broken in this version of the lib 0.3.1
+#ifndef TOUCH_IRQ
+#define TOUCH_IRQ -1
+#endif
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define USE_VIRTUAL_KEYBOARD 1
+
+#define ST7796_NSS 25
+#define ST7796_RS 13  // DC
+#define ST7796_SDA 14 // MOSI
+#define ST7796_SCK 15
+#define ST7796_RESET 2
+#define ST7796_MISO -1
+#define ST7796_BUSY -1
+#define VTFT_LEDA 4
+#define TFT_SPI_FREQUENCY 60000000
+#define TFT_HEIGHT 222
+#define TFT_WIDTH 480
+#define BRIGHTNESS_DEFAULT 100        // Medium Low Brightness
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#endif
--- a/variants/esp32/tbeam_v07/platformio.ini
+++ b/variants/esp32/tbeam_v07/platformio.ini
@@ -1,5 +1,12 @@
 ; The original TBEAM board without the AXP power chip and a few other changes
 [env:tbeam0_7]
+custom_meshtastic_hw_model = 6
+custom_meshtastic_hw_model_slug = TBEAM_V0P7
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-Beam V0.7
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-t-beam
--- a/variants/esp32/tlora_v1/platformio.ini
+++ b/variants/esp32/tlora_v1/platformio.ini
@@ -1,4 +1,11 @@
 [env:tlora-v1]
+custom_meshtastic_hw_model = 2
+custom_meshtastic_hw_model_slug = TLORA_V1
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V1
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
--- a/variants/esp32/tlora_v2/platformio.ini
+++ b/variants/esp32/tlora_v2/platformio.ini
@@ -1,4 +1,11 @@
 [env:tlora-v2]
+custom_meshtastic_hw_model = 1
+custom_meshtastic_hw_model_slug = TLORA_V2
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = false
+custom_meshtastic_display_name = LILYGO T-LoRa V2
+custom_meshtastic_tags = LilyGo
+
 board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
--- a/variants/esp32/tlora_v2_1_16/platformio.ini
+++ b/variants/esp32/tlora_v2_1_16/platformio.ini
@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_6]
+custom_meshtastic_hw_model = 3
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P6
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.6
+custom_meshtastic_images = tlora-v2-1-1_6.svg
+custom_meshtastic_tags = LilyGo
+
 extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true
--- a/variants/esp32/tlora_v2_1_18/platformio.ini
+++ b/variants/esp32/tlora_v2_1_18/platformio.ini
@@ -1,4 +1,13 @@
 [env:tlora-v2-1-1_8]
+custom_meshtastic_hw_model = 15
+custom_meshtastic_hw_model_slug = TLORA_V2_1_1P8
+custom_meshtastic_architecture = esp32
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-LoRa V2.1-1.8
+custom_meshtastic_images = tlora-v2-1-1_8.svg
+custom_meshtastic_tags = LilyGo, 2.4GHz
+
 extends = esp32_base
 board_level = extra
 board = ttgo-lora32-v21
--- a/variants/esp32/wiphone/platformio.ini
+++ b/variants/esp32/wiphone/platformio.ini
@@ -10,6 +10,9 @@ build_flags =
  -I variants/esp32/wiphone
 lib_deps = 
  ${esp32_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
-  sparkfun/SX1509 IO Expander@^3.0.5
-  pololu/APA102@^3.0.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
+  sparkfun/SX1509 IO Expander@3.0.6
+  # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
+  pololu/APA102@3.0.0
--- a/variants/esp32/wiphone/variant.h
+++ b/variants/esp32/wiphone/variant.h
@@ -34,6 +34,7 @@
 #define ST7789_SCK 18
 #define ST7789_CS 5
 #define ST7789_RS 26
+#define USE_TFTDISPLAY 1
 // I don't have a 'wiphone' but this I think should not be defined this way (don't set TFT_BL if we don't have a hw way to control
 // it)
 // #define ST7789_BL -1 // EXTENDER_PIN(9)
--- a/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
+++ b/variants/esp32c3/diy/esp32c3_super_mini/platformio.ini
@@ -4,7 +4,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/diy/esp32c3_super_mini
  -D ARDUINO_USB_MODE=1
--- a/variants/esp32c3/esp32c3.ini
+++ b/variants/esp32c3/esp32c3.ini
@@ -0,0 +1,6 @@
+[esp32c3_base]
+extends = esp32_common
+custom_esp32_kind = esp32c3
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder
--- a/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
+++ b/variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
--- a/variants/esp32c3/heltec_esp32c3/platformio.ini
+++ b/variants/esp32c3/heltec_esp32c3/platformio.ini
@@ -1,9 +1,18 @@
 [env:heltec-ht62-esp32c3-sx1262]
+custom_meshtastic_hw_model = 53
+custom_meshtastic_hw_model_slug = HELTEC_HT62
+custom_meshtastic_architecture = esp32-c3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec HT62
+custom_meshtastic_images = heltec-ht62-esp32c3-sx1262.svg
+custom_meshtastic_tags = Heltec
+
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = pr
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HT62
  -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200
--- a/variants/esp32c3/heltec_hru_3601/platformio.ini
+++ b/variants/esp32c3/heltec_hru_3601/platformio.ini
@@ -2,8 +2,9 @@
 extends = esp32c3_base
 board = adafruit_qtpy_esp32c3
 build_flags =
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D HELTEC_HRU_3601
  -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32c3/m5stack-stamp-c3/platformio.ini
+++ b/variants/esp32c3/m5stack-stamp-c3/platformio.ini
@@ -3,7 +3,7 @@ extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32c3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200
--- a/variants/esp32c6/esp32c6.ini
+++ b/variants/esp32c6/esp32c6.ini
@@ -0,0 +1,48 @@
+[esp32c6_base]
+extends = esp32_common
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+build_src_filter = 
+  ${esp32_common.build_src_filter} -<mesh/http>
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+lib_ignore =
+  ${esp32_common.lib_ignore}
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  
--- a/variants/esp32c6/m5stack_unitc6l/platformio.ini
+++ b/variants/esp32c6/m5stack_unitc6l/platformio.ini
@@ -1,4 +1,13 @@
 [env:m5stack-unitc6l]
+custom_meshtastic_hw_model = 111
+custom_meshtastic_hw_model_slug = M5STACK_C6L
+custom_meshtastic_architecture = esp32-c6
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = M5Stack Unit C6L
+custom_meshtastic_images = m5_c6l.svg
+custom_meshtastic_tags = M5Stack
+
 extends = esp32c6_base
 board = esp32-c6-devkitc-1
 ;OpenOCD flash method
@@ -12,8 +21,10 @@ build_unflags =
  -D HAS_WIFI
 lib_deps =
  ${esp32c6_base.lib_deps}
-  adafruit/Adafruit NeoPixel@^1.12.3
-  h2zero/NimBLE-Arduino@^2.3.6
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@2.3.7
 build_flags = 
  ${esp32c6_base.build_flags}
  -D M5STACK_UNITC6L
@@ -22,8 +33,6 @@ build_flags =
  -DARDUINO_USB_CDC_ON_BOOT=1
  -DARDUINO_USB_MODE=1
  -D HAS_BLUETOOTH=1
-  -D MESHTASTIC_EXCLUDE_WEBSERVER
-  -D MESHTASTIC_EXCLUDE_MQTT
 	-DCONFIG_BT_NIMBLE_EXT_ADV=1
 	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
  -D NIMBLE_TWO
--- a/variants/esp32s2/esp32s2.ini
+++ b/variants/esp32s2/esp32s2.ini
@@ -0,0 +1,19 @@
+[esp32s2_base]
+extends = esp32_common
+custom_esp32_kind = esp32s2
+
+build_src_filter = 
+ ${esp32_common.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
+
+monitor_speed = 115200
+
+build_flags =
+  ${esp32_common.build_flags}
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  
+lib_ignore = 
+  ${esp32_common.lib_ignore}
+  NimBLE-Arduino
+  libpax
--- a/variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini
+++ b/variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini
@@ -1,4 +1,13 @@
 [env:CDEBYTE_EoRa-S3]
+custom_meshtastic_hw_model = 61
+custom_meshtastic_hw_model_slug = CDEBYTE_EORA_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = EBYTE EoRa-S3
+custom_meshtastic_tags = EByte
+custom_meshtastic_requires_dfu = true
+
 extends = esp32s3_base
 board = CDEBYTE_EoRa-S3
 build_flags =
--- a/variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini
@@ -1,4 +1,14 @@
 [env:thinknode_m2]
+custom_meshtastic_hw_model = 90
+custom_meshtastic_hw_model_slug = THINKNODE_M2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M2
+custom_meshtastic_images = thinknode_m2.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =
--- a/variants/esp32s3/ELECROW-ThinkNode-M2/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M2/variant.h
@@ -56,10 +56,6 @@
 #define HAS_SCREEN 1
 #define USE_SH1106 1

-// PCF8563 RTC Module
-// #define PCF8563_RTC 0x51
-// #define PIN_RTC_INT 48 // Interrupt from the PCF8563 RTC
-#define HAS_RTC 0
 #define HAS_GPS 0

 #define BUTTON_PIN PIN_BUTTON1
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
@@ -1,4 +1,14 @@
 [env:thinknode_m5]
+custom_meshtastic_hw_model = 107
+custom_meshtastic_hw_model_slug = THINKNODE_M5
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = ThinkNode M5
+custom_meshtastic_images = thinknode_m1.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = false
+
 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
 build_flags =
@@ -16,6 +26,7 @@ build_flags =
  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.

 lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
-  maxpromer/PCA9557-arduino @ ^1.0.0
+  # renovate: datasource=custom.pio depName=PCA9557-arduino packageName=maxpromer/library/PCA9557-arduino
+  maxpromer/PCA9557-arduino@1.0.0
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
@@ -14,6 +14,8 @@
 #define BATTERY_PIN 8
 #define ADC_CHANNEL ADC1_GPIO8_CHANNEL

+#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+
 #define PIN_BUZZER 9

 // Buttons
@@ -42,9 +44,6 @@
 #define PIN_SERIAL1_RX GPS_TX_PIN
 #define PIN_SERIAL1_TX GPS_RX_PIN

-// PCF8563 RTC Module
-#define PCF8563_RTC 0x51
-
 #define SX126X_CS 17
 #define LORA_SCK 16
 #define LORA_MOSI 15
--- a/variants/esp32s3/bpi_picow_esp32_s3/platformio.ini
+++ b/variants/esp32s3/bpi_picow_esp32_s3/platformio.ini
@@ -8,9 +8,10 @@ board_level = extra
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2
 lib_deps =
-  ${esp32_base.lib_deps}
-  caveman99/ESP32 Codec2@^1.0.1
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=caveman99-ESP32_Codec2 packageName=caveman99/library/ESP32 Codec2
+  caveman99/ESP32 Codec2@1.0.1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/bpi_picow_esp32_s3
--- a/variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -25,6 +25,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-4-epaper]
@@ -54,6 +55,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-2-epaper]
@@ -83,4 +85,5 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -9,14 +9,16 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/diy/my_esp32s3_diy_eink
  -Dmy
--- a/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
@@ -9,13 +9,14 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 lib_deps =
-  ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  ${esp32s3_base.lib_deps}
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/diy/my_esp32s3_diy_oled
  -DBOARD_HAS_PSRAM
--- a/variants/esp32s3/dreamcatcher/platformio.ini
+++ b/variants/esp32s3/dreamcatcher/platformio.ini
@@ -12,8 +12,10 @@ build_flags =
  -D ARDUINO_USB_CDC_ON_BOOT=1

 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:dreamcatcher-2206] 
 extends = esp32s3_base
--- a/variants/esp32s3/elecrow_panel/platformio.ini
+++ b/variants/esp32s3/elecrow_panel/platformio.ini
@@ -41,9 +41,13 @@ build_flags = ${esp32s3_base.build_flags} -Os

 lib_deps = ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  # renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
  hideakitai/TCA9534@0.1.1

 [crowpanel_small_esp32s3_base] ; 2.4, 2.8, 3.5 inch
@@ -71,6 +75,17 @@ build_flags =
  -D DISPLAY_SET_RESOLUTION

 [env:elecrow-adv-24-28-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 2.4/2.8 TFT
+custom_meshtastic_images = crowpanel_2_4.svg, crowpanel_2_8.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 build_flags =
  ${crowpanel_small_esp32s3_base.build_flags}
@@ -95,6 +110,17 @@ build_flags =
  -D LGFX_TOUCH_ROTATION=0

 [env:elecrow-adv-35-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 3.5 TFT
+custom_meshtastic_images = crowpanel_3_5.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_small_esp32s3_base
 board_level = pr
 build_flags =
@@ -123,6 +149,17 @@ build_flags =

 ; 4.3, 5.0, 7.0 inch 800x480 IPS (V1)
 [env:elecrow-adv1-43-50-70-tft]
+custom_meshtastic_hw_model = 97
+custom_meshtastic_hw_model_slug = CROWPANEL
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Crowpanel Adv 4.3/5.0/7.0 TFT
+custom_meshtastic_images = crowpanel_5_0.svg, crowpanel_7_0.svg
+custom_meshtastic_tags = Elecrow
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = crowpanel_large_esp32s3_base
 build_flags =
  ${crowpanel_large_esp32s3_base.build_flags}
--- a/variants/esp32s3/esp32-s3-pico/platformio.ini
+++ b/variants/esp32s3/esp32-s3-pico/platformio.ini
@@ -22,5 +22,7 @@ build_flags = ${esp32s3_base.build_flags}
  -DEINK_HEIGHT=128

 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.6.2
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.5
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/esp32s3.ini
+++ b/variants/esp32s3/esp32s3.ini
@@ -0,0 +1,5 @@
+[esp32s3_base]
+extends = esp32_common
+custom_esp32_kind = esp32s3
+
+monitor_speed = 115200
--- a/variants/esp32s3/hackaday-communicator/pins_arduino.h
+++ b/variants/esp32s3/hackaday-communicator/pins_arduino.h
@@ -0,0 +1,59 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// static const uint8_t TX = 43;
+// static const uint8_t RX = 44;
+
+static const uint8_t SDA = 47;
+static const uint8_t SCL = 14;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 17;
+static const uint8_t MOSI = 3;
+static const uint8_t MISO = 9;
+static const uint8_t SCK = 8;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+// static const uint8_t BAT_ADC_PIN = 4;
+
+#endif /* Pins_Arduino_h */
--- a/variants/esp32s3/hackaday-communicator/platformio.ini
+++ b/variants/esp32s3/hackaday-communicator/platformio.ini
@@ -0,0 +1,16 @@
+; Hackaday Communicator
+[env:hackaday-communicator]
+extends = esp32s3_base
+board = hackaday-communicator
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_flags = ${esp32s3_base.build_flags} 
+  -D HACKADAY_COMMUNICATOR
+  -D BOARD_HAS_PSRAM
+  -I variants/esp32s3/hackaday-communicator
+
+lib_deps = ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
--- a/variants/esp32s3/hackaday-communicator/variant.h
+++ b/variants/esp32s3/hackaday-communicator/variant.h
@@ -0,0 +1,61 @@
+#define TFT_BL 2
+#define SPI_FREQUENCY 2000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 142
+#define TFT_WIDTH 428
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define HAS_SCREEN 1
+#define TFT_BLACK 0
+#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+#define GPS_DEFAULT_NOT_PRESENT 1
+// #define GPS_RX_PIN 44
+// #define GPS_TX_PIN 43
+
+// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+//  ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
+// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+
+// keyboard
+#define I2C_SDA 47 // I2C pins for this board
+#define I2C_SCL 14
+// #define KB_POWERON -1                  // must be set to HIGH
+// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
+// #define KB_BL_PIN 46                   // not used for now
+#define KB_INT 13
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+#define TFT_DC 39
+#define TFT_CS 41
+
+// LoRa
+#define USE_SX1262
+
+#define LORA_SCK 8
+#define LORA_MISO 9
+#define LORA_MOSI 3
+#define LORA_CS 17
+
+// #define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 18
+#define LORA_DIO1 16 // SX1262 IRQ
+#define LORA_DIO2 15 // SX1262 BUSY
+// #define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// #define LED_PIN 1
--- a/variants/esp32s3/heltec_sensor_hub/platformio.ini
+++ b/variants/esp32s3/heltec_sensor_hub/platformio.ini
@@ -9,4 +9,5 @@ build_flags =
  -D HELTEC_SENSOR_HUB

 lib_deps = ${esp32s3_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
+  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/heltec_v3/platformio.ini
+++ b/variants/esp32s3/heltec_v3/platformio.ini
@@ -1,4 +1,14 @@
-[env:heltec-v3] 
+[env:heltec-v3]
+custom_meshtastic_hw_model = 43
+custom_meshtastic_hw_model_slug = HELTEC_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V3
+custom_meshtastic_images = heltec-v3.svg, heltec-v3-case.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_level = pr
--- a/variants/esp32s3/heltec_v4/pins_arduino.h
+++ b/variants/esp32s3/heltec_v4/pins_arduino.h
@@ -13,8 +13,8 @@ static const uint8_t LED_BUILTIN = 35;
 static const uint8_t TX = 43;
 static const uint8_t RX = 44;

-static const uint8_t SDA = 3;
-static const uint8_t SCL = 4;
+static const uint8_t SDA = 4;
+static const uint8_t SCL = 3;

 static const uint8_t SS = 8;
 static const uint8_t MOSI = 10;
--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -1,4 +1,4 @@
-[env:heltec-v4] 
+[heltec_v4_base] 
 extends = esp32s3_base
 board = heltec_v4
 board_check = true
@@ -7,3 +7,117 @@ build_flags =
  ${esp32s3_base.build_flags}
  -D HELTEC_V4
  -I variants/esp32s3/heltec_v4
+
+
+[env:heltec-v4]
+custom_meshtastic_hw_model = 110
+custom_meshtastic_hw_model_slug = HELTEC_V4
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec V4
+custom_meshtastic_images = heltec_v4.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
+extends = heltec_v4_base
+build_flags = 
+  ${heltec_v4_base.build_flags}
+  -D HELTEC_V4_OLED
+  -D USE_SSD1306 ; Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
+  -D LED_PIN=35
+  -D RESET_OLED=21
+  -D I2C_SDA=17
+  -D I2C_SCL=18
+  -D I2C_SDA1=4
+  -D I2C_SCL1=3
+
+[env:heltec-v4-tft]
+extends = heltec_v4_base
+build_flags = 
+  ${heltec_v4_base.build_flags} ;-Os
+  -D HELTEC_V4_TFT
+  -D I2C_SDA=4
+  -D I2C_SCL=3
+  -D I2C_SDA1=47
+  -D I2C_SCL1=48
+  -D PIN_BUTTON2=35
+  -D PIN_BUZZER=6
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D CONFIG_ARDUHAL_LOG_COLORS
+  -D RADIOLIB_DEBUG_SPI=0
+  -D RADIOLIB_DEBUG_PROTOCOL=0
+  -D RADIOLIB_DEBUG_BASIC=0
+  -D RADIOLIB_VERBOSE_ASSERT=0
+  -D RADIOLIB_SPI_PARANOID=0
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D RAM_SIZE=1560
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D LV_BUILD_TEST=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D USE_PACKET_API
+  -D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
+  -D VIEW_320x240
+  -D MAP_FULL_REDRAW
+  -D DISPLAY_SIZE=320x240 ; landscape mode
+  -D LGFX_PIN_SCK=17
+  -D LGFX_PIN_MOSI=33
+  -D LGFX_PIN_DC=16
+  -D LGFX_PIN_CS=15
+  -D LGFX_PIN_BL=21
+  -D LGFX_PIN_RST=18
+  -D CUSTOM_TOUCH_DRIVER
+  -D TOUCH_SDA_PIN=I2C_SDA1
+  -D TOUCH_SCL_PIN=I2C_SCL1
+  -D TOUCH_INT_PIN=-1  ;45
+  -D TOUCH_RST_PIN=44
+;base UI
+  -D TFT_CS=LGFX_PIN_CS
+  -D ST7789_CS=TFT_CS
+  -D ST7789_RS=LGFX_PIN_DC
+  -D ST7789_SDA=LGFX_PIN_MOSI 
+  -D ST7789_SCK=LGFX_PIN_SCK
+  -D ST7789_RESET=LGFX_PIN_RST
+  -D ST7789_MISO=-1
+  -D ST7789_BUSY=-1
+  -D ST7789_BL=LGFX_PIN_BL
+  -D ST7789_SPI_HOST=SPI3_HOST
+  -D TFT_BL=ST7789_BL
+  -D SPI_FREQUENCY=40000000
+  -D SPI_READ_FREQUENCY=4000000
+  -D TFT_HEIGHT=320
+  -D TFT_WIDTH=240
+  -D TFT_OFFSET_X=0
+  -D TFT_OFFSET_Y=0
+  -D TFT_OFFSET_ROTATION=0
+  -D SCREEN_ROTATE
+  -D SCREEN_TRANSITION_FRAMERATE=5
+  -D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
+  -D HAS_TOUCHSCREEN=1
+  -D TOUCH_I2C_PORT=0
+  -D TOUCH_SLAVE_ADDRESS=0x2E
+  -D SCREEN_TOUCH_INT=TOUCH_INT_PIN
+  -D SCREEN_TOUCH_RST=TOUCH_RST_PIN
+
+lib_deps = ${heltec_v4_base.lib_deps}
+  ; ${device-ui_base.lib_deps}
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
+  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
+  ; TODO revert to official device-ui (when merged)
+  # renovate: datasource=git-refs depName=Quency-D_device-ui packageName=https://github.com/Quency-D/device-ui gitBranch=heltec-v4-tft
+  https://github.com/Quency-D/device-ui/archive/7c9870b8016641190b059bdd90fe16c1012a39eb.zip
--- a/variants/esp32s3/heltec_v4/variant.h
+++ b/variants/esp32s3/heltec_v4/variant.h
@@ -1,11 +1,3 @@
-#define LED_PIN 35
-
-#define USE_SSD1306 // Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
-
-#define RESET_OLED 21
-#define I2C_SDA 17 // I2C pins for this board
-#define I2C_SCL 18
-
 #define VEXT_ENABLE 36 // active low, powers the oled display and the lora antenna boost
 #define BUTTON_PIN 0

@@ -37,11 +29,36 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8

-#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
-#define LORA_PA_POWER 7 // power en
-#define LORA_PA_EN 2
-#define LORA_PA_TX_EN 46 // enable tx
+// ---- GC1109 RF FRONT END CONFIGURATION ----
+// The Heltec V4 uses a GC1109 FEM chip with integrated PA and LNA
+// RF path: SX1262 -> GC1109 PA -> Pi attenuator -> Antenna
+// Measured net TX gain (non-linear due to PA compression):
+//   +11dB at 0-15dBm input  (e.g., 10dBm in -> 21dBm out)
+//   +10dB at 16-17dBm input
+//   +9dB  at 18-19dBm input
+//   +7dB  at 21dBm input    (e.g., 21dBm in -> 28dBm out max)
+// Control logic (from GC1109 datasheet):
+//   Shutdown:        CSD=0, CTX=X, CPS=X
+//   Receive LNA:     CSD=1, CTX=0, CPS=X  (17dB gain, 2dB NF)
+//   Transmit bypass: CSD=1, CTX=1, CPS=0  (~1dB loss, no PA)
+//   Transmit PA:     CSD=1, CTX=1, CPS=1  (full PA enabled)
+// Pin mapping:
+//   CTX (pin 6)  -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
+//   CSD (pin 4)  -> GPIO2: Chip enable (HIGH=on, LOW=shutdown)
+//   CPS (pin 5)  -> GPIO46: PA mode select (HIGH=full PA, LOW=bypass)
+//   VCC0/VCC1    -> Vfem via U3 LDO, controlled by GPIO7
+#define USE_GC1109_PA
+#define LORA_PA_POWER 7  // VFEM_Ctrl - GC1109 LDO power enable
+#define LORA_PA_EN 2     // CSD - GC1109 chip enable (HIGH=on)
+#define LORA_PA_TX_EN 46 // CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)

+// GC1109 FEM: TX/RX path switching is handled by DIO2 -> CTX pin (via SX126X_DIO2_AS_RF_SWITCH)
+// GPIO46 is CPS (PA mode), not TX control - setTransmitEnable() handles it in SX126xInterface.cpp
+// Do NOT use SX126X_TXEN/RXEN as that would cause double-control of GPIO46
+
+#if HAS_TFT
+#define USE_TFTDISPLAY 1
+#endif
 /*
 * GPS pins
 */
--- a/variants/esp32s3/heltec_vision_master_e213/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_e213/platformio.ini
@@ -1,4 +1,15 @@
 [env:heltec-vision-master-e213]
+custom_meshtastic_hw_model = 67
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E213
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E213
+custom_meshtastic_images = heltec-vision-master-e213.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv
@@ -17,8 +28,8 @@ build_flags =
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

 [env:heltec-vision-master-e213-inkhud]
@@ -27,7 +38,7 @@ board = heltec_vision_master_e213
 board_level = pr
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter}
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags =  
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_vision_master_e290/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_e290/platformio.ini
@@ -1,5 +1,16 @@
 ; Using the original screen class
 [env:heltec-vision-master-e290]
+custom_meshtastic_hw_model = 68
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_E290
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master E290
+custom_meshtastic_images = heltec-vision-master-e290.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
@@ -20,8 +31,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
-  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

 [env:heltec-vision-master-e290-inkhud]
@@ -29,7 +40,7 @@ extends = esp32s3_base, inkhud
 board = heltec_vision_master_e290
 board_build.partitions = default_8MB.csv
 build_src_filter = 
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags = 
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_vision_master_t190/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_t190/platformio.ini
@@ -1,4 +1,15 @@
 [env:heltec-vision-master-t190]
+custom_meshtastic_hw_model = 66
+custom_meshtastic_hw_model_slug = HELTEC_VISION_MASTER_T190
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Vision Master T190
+custom_meshtastic_images = heltec-vision-master-t190.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_vision_master_t190
 board_build.partitions = default_8MB.csv
@@ -8,6 +19,6 @@ build_flags =
  -D HELTEC_VISION_MASTER_T190
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lewisxhe/PCF8563_Library@^1.0.1
+  # renovate: datasource=git-refs depName=meshtastic-st7789 packageName=https://github.com/meshtastic/st7789 gitBranch=main
  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600
--- a/variants/esp32s3/heltec_wireless_paper/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_paper/platformio.ini
@@ -1,5 +1,15 @@
 ; Using the original screen class
 [env:heltec-wireless-paper]
+custom_meshtastic_hw_model = 49
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Paper
+custom_meshtastic_images = heltec-wireless-paper.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
@@ -18,8 +28,8 @@ build_flags =
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
-  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

 [env:heltec-wireless-paper-inkhud]
@@ -27,7 +37,7 @@ extends = esp32s3_base, inkhud
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
 build_src_filter =
-  ${esp32_base.build_src_filter} 
+  ${esp32s3_base.build_src_filter}
  ${inkhud.build_src_filter}
 build_flags =
  ${esp32s3_base.build_flags}
--- a/variants/esp32s3/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_paper_v1/platformio.ini
@@ -1,4 +1,14 @@
 [env:heltec-wireless-paper-v1_0]
+custom_meshtastic_hw_model = 57
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_PAPER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Paper V1.0
+custom_meshtastic_images = heltec-wireless-paper-v1_0.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wifi_lora_32_V3
@@ -15,6 +25,6 @@ build_flags =
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
 lib_deps =
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
--- a/variants/esp32s3/heltec_wireless_tracker/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker/platformio.ini
@@ -1,4 +1,15 @@
 [env:heltec-wireless-tracker]
+custom_meshtastic_hw_model = 48
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.1
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
@@ -12,4 +23,5 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/heltec_wireless_tracker/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker/variant.h
@@ -27,6 +27,7 @@
 #define TFT_OFFSET_Y -1
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1

 // pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
 // GPS UC6580:          GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
@@ -1,4 +1,14 @@
 [env:heltec-wireless-tracker-V1-0]
+custom_meshtastic_hw_model = 58
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V1_0
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = false
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Heltec Wireless Tracker V1.0
+custom_meshtastic_images = heltec-wireless-tracker.svg
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board_level = extra
 board = heltec_wireless_tracker
@@ -11,4 +21,5 @@ build_flags =
  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
@@ -27,6 +27,8 @@
 #define VTFT_CTRL 46                  // Heltec Tracker needs this pulled low for TFT
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define FORCE_LOW_RES 1
+#define USE_TFTDISPLAY 1

 #define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
 #define VEXT_ON_VALUE LOW
--- a/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
@@ -10,4 +10,5 @@ build_flags =
  -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
--- a/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
@@ -27,6 +27,7 @@
 #define TFT_INVERT false
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1

 #define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
 #define VEXT_ON_VALUE HIGH
@@ -72,7 +73,29 @@
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8

-#define USE_GC1109_PA   // We have a GC1109 power amplifier+attenuator
-#define LORA_PA_POWER 7 // power en
-#define LORA_PA_EN 4
-#define LORA_PA_TX_EN 46 // enable tx
+// ---- GC1109 RF FRONT END CONFIGURATION ----
+// The Heltec Wireless Tracker V2 uses a GC1109 FEM chip with integrated PA and LNA
+// RF path: SX1262 -> GC1109 PA -> Pi attenuator -> Antenna
+// Measured net TX gain (non-linear due to PA compression):
+//   +11dB at 0-15dBm input  (e.g., 10dBm in -> 21dBm out)
+//   +10dB at 16-17dBm input
+//   +9dB  at 18-19dBm input
+//   +7dB  at 21dBm input    (e.g., 21dBm in -> 28dBm out max)
+// Control logic (from GC1109 datasheet):
+//   Shutdown:        CSD=0, CTX=X, CPS=X
+//   Receive LNA:     CSD=1, CTX=0, CPS=X  (17dB gain, 2dB NF)
+//   Transmit bypass: CSD=1, CTX=1, CPS=0  (~1dB loss, no PA)
+//   Transmit PA:     CSD=1, CTX=1, CPS=1  (full PA enabled)
+// Pin mapping:
+//   CTX (pin 6)  -> SX1262 DIO2: TX/RX path select (automatic via SX126X_DIO2_AS_RF_SWITCH)
+//   CSD (pin 4)  -> GPIO4: Chip enable (HIGH=on, LOW=shutdown)
+//   CPS (pin 5)  -> GPIO46: PA mode select (HIGH=full PA, LOW=bypass)
+//   VCC0/VCC1    -> Vfem via U3 LDO, controlled by GPIO7
+#define USE_GC1109_PA
+#define LORA_PA_POWER 7  // VFEM_Ctrl - GC1109 LDO power enable
+#define LORA_PA_EN 4     // CSD - GC1109 chip enable (HIGH=on)
+#define LORA_PA_TX_EN 46 // CPS - GC1109 PA mode (HIGH=full PA, LOW=bypass)
+
+// GC1109 FEM: TX/RX path switching is handled by DIO2 -> CTX pin (via SX126X_DIO2_AS_RF_SWITCH)
+// GPIO46 is CPS (PA mode), not TX control - setTransmitEnable() handles it in SX126xInterface.cpp
+// Do NOT use SX126X_TXEN/RXEN as that would cause double-control of GPIO46
--- a/variants/esp32s3/heltec_wsl_v3/platformio.ini
+++ b/variants/esp32s3/heltec_wsl_v3/platformio.ini
@@ -1,4 +1,14 @@
-[env:heltec-wsl-v3] 
+[env:heltec-wsl-v3]
+custom_meshtastic_hw_model = 44
+custom_meshtastic_hw_model_slug = HELTEC_WSL_V3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Heltec Wireless Stick Lite V3
+custom_meshtastic_images = heltec-wsl-v3.svg
+custom_meshtastic_tags = Heltec
+custom_meshtastic_partition_scheme = 8MB
+ 
 extends = esp32s3_base
 board = heltec_wifi_lora_32_V3
 board_build.partitions = default_8MB.csv
--- a/variants/esp32s3/icarus/platformio.ini
+++ b/variants/esp32s3/icarus/platformio.ini
@@ -7,9 +7,6 @@ board_build.mcu = esp32s3
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/link32_s3_v1/platformio.ini
+++ b/variants/esp32s3/link32_s3_v1/platformio.ini
@@ -1,8 +1,9 @@
 [env:link32-s3-v1]
 extends = esp32s3_base
 board = esp32-s3-devkitc-1
+board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D LINK_32
  -I variants/esp32s3/link32_s3_v1
  -DARDUINO_USB_CDC_ON_BOOT
--- a/variants/esp32s3/m5stack_cores3/platformio.ini
+++ b/variants/esp32s3/m5stack_cores3/platformio.ini
@@ -6,8 +6,7 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -D M5STACK_CORES3
  -I variants/esp32s3/m5stack_cores3
-lib_deps = ${esp32_base.lib_deps}
--- a/variants/esp32s3/mesh-tab/platformio.ini
+++ b/variants/esp32s3/mesh-tab/platformio.ini
@@ -46,11 +46,12 @@ build_flags = ${esp32s3_base.build_flags}
  -D VIEW_320x240
  -D USE_PACKET_API
  -I variants/esp32s3/mesh-tab
-build_src_filter = ${esp32_base.build_src_filter}
+build_src_filter = ${esp32s3_base.build_src_filter}
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [mesh_tab_xpt2046]
 extends = mesh_tab_base
--- a/variants/esp32s3/mesh-tab/variant.h
+++ b/variants/esp32s3/mesh-tab/variant.h
@@ -55,5 +55,6 @@
 #define SX126X_RESET 14
 #define SX126X_RXEN 47
 #define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8

 #endif
--- a/variants/esp32s3/nibble_esp32/platformio.ini
+++ b/variants/esp32s3/nibble_esp32/platformio.ini
@@ -3,6 +3,6 @@ extends = esp32s3_base
 board = esp32-s3-zero
 board_level = extra
 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/nibble_esp32
--- a/variants/esp32s3/picomputer-s3/platformio.ini
+++ b/variants/esp32s3/picomputer-s3/platformio.ini
@@ -1,4 +1,12 @@
 [env:picomputer-s3]
+custom_meshtastic_hw_model = 52
+custom_meshtastic_hw_model_slug = PICOMPUTER_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Pi Computer S3
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = bpi_picow_esp32_s3
 board_check = true
@@ -15,7 +23,8 @@ build_flags =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 build_src_filter =
  ${esp32s3_base.build_src_filter}
--- a/variants/esp32s3/picomputer-s3/variant.h
+++ b/variants/esp32s3/picomputer-s3/variant.h
@@ -32,6 +32,7 @@
 #define ST7789_CS 6
 #define ST7789_RS 1
 #define ST7789_BL 5
+#define USE_TFTDISPLAY 1

 #define ST7789_RESET -1
 #define ST7789_MISO -1
--- a/variants/esp32s3/rak3312/pins_arduino.h
+++ b/variants/esp32s3/rak3312/pins_arduino.h
@@ -17,6 +17,8 @@ static const uint8_t MOSI = 11;
 static const uint8_t MISO = 10;
 static const uint8_t SCK = 13;

+#define SPI_INTERFACES_COUNT 1
+
 #define SPI_MOSI (11)
 #define SPI_SCK (13)
 #define SPI_MISO (10)
@@ -25,4 +27,51 @@ static const uint8_t SCK = 13;
 // LEDs
 #define LED_BUILTIN LED_GREEN

+#ifdef _VARIANT_RAK3112_
+/*
+ * Serial interfaces
+ */
+// TXD1 RXD1 on Base Board
+#define PIN_SERIAL1_RX (44)
+#define PIN_SERIAL1_TX (43)
+
+/*
+ * Internal SPI to LoRa transceiver
+ */
+#define LORA_SX126X_SCK 5
+#define LORA_SX126X_MISO 3
+#define LORA_SX126X_MOSI 6
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (21)
+#define PIN_A1 (14)
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 2
+
+#define PIN_WIRE1_SDA (17)
+#define PIN_WIRE1_SCL (18)
+
+/*
+ * GPIO's
+ */
+#define WB_IO1 21
+#define WB_IO2 2
+// #define WB_IO2 14
+#define WB_IO3 41
+#define WB_IO4 42
+#define WB_IO5 38
+#define WB_IO6 39
+// #define WB_SW1 35 NC
+#define WB_A0 1
+#define WB_A1 2
+#define WB_CS 12
+#define WB_LED1 46
+#define WB_LED2 45
+#endif
+
 #endif /* Pins_Arduino_h */
--- a/variants/esp32s3/rak3312/platformio.ini
+++ b/variants/esp32s3/rak3312/platformio.ini
@@ -1,4 +1,15 @@
 [env:rak3312]
+custom_meshtastic_hw_model = 106
+custom_meshtastic_hw_model_slug = RAK3312
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = RAK3312
+custom_meshtastic_images = rak_3312.svg
+custom_meshtastic_tags = RAK
+custom_meshtastic_requires_dfu = false
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = wiscore_rak3312
 board_level = pr
@@ -6,6 +17,18 @@ board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags}
+  ${esp32s3_base.build_flags}
  -D RAK3312
  -I variants/esp32s3/rak3312
+
+[env:rak3112]
+extends = esp32s3_base
+board = wiscore_rak3312
+board_level = extra
+upload_protocol = esptool
+
+build_flags =
+  ${esp32_base.build_flags}
+  -D RAK3312 
+  -D _VARIANT_RAK3112_
+  -I variants/esp32s3/rak3312
--- a/variants/esp32s3/rak3312/variant.h
+++ b/variants/esp32s3/rak3312/variant.h
@@ -18,11 +18,6 @@
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #endif

-#define SX126X_POWER_EN (4)
-
-#define PIN_POWER_EN PIN_3V3_EN
-#define PIN_3V3_EN (14)
-
 #define LED_GREEN 46
 #define LED_BLUE 45

@@ -35,10 +30,30 @@

 #define LED_STATE_ON 1 // State when LED is litted

+#define BATTERY_PIN 1
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+
+#ifdef _VARIANT_RAK3112_ //  Modular variant (stamp)
+#define ADC_MULTIPLIER 2.11
+
+#define BUTTON_NEED_PULLUP
+
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+#define SDCARD_CS SPI_CS
+
+#define I2C_SDA1 PIN_WIRE1_SDA
+#define I2C_SCL1 PIN_WIRE1_SCL
+#else // Generic 3312 variant (40-pin standard connector)
+#define ADC_MULTIPLIER 1.667
+
+#define SX126X_POWER_EN (4)
+
+#define PIN_POWER_EN PIN_3V3_EN
+#define PIN_3V3_EN (14)
+
 #define HAS_GPS 1
 #define GPS_TX_PIN 43
 #define GPS_RX_PIN 44

-#define BATTERY_PIN 1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
-#define ADC_MULTIPLIER 1.667
+#endif
--- a/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+++ b/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
@@ -8,14 +8,15 @@ upload_protocol = esptool
 board_build.partitions = default_8MB.csv

 build_flags = 
-  ${esp32_base.build_flags} 
+  ${esp32s3_base.build_flags}
  -D RAK3312
  -D RAK_WISMESH_TAP_V2 
  -I variants/esp32s3/rak_wismesh_tap_v2

 lib_deps =
  ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7

 [ft5x06]
 extends = mesh_tab_base
--- a/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
+++ b/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
@@ -1,5 +1,16 @@
 ; Seeed Studio SenseCAP Indicator
 [env:seeed-sensecap-indicator]
+custom_meshtastic_hw_model = 70
+custom_meshtastic_hw_model_slug = SENSECAP_INDICATOR
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = Seeed SenseCAP Indicator
+custom_meshtastic_images = seeed-sensecap-indicator.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_partition_scheme = 8MB
+ = true
+
 extends = esp32s3_base
 platform_packages =
    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)
@@ -9,7 +20,7 @@ board_check = true
 board_build.partitions = partition-table-8MB.csv
 upload_protocol = esptool

-build_flags = ${esp32_base.build_flags}
+build_flags = ${esp32s3_base.build_flags}
  -Ivariants/esp32s3/seeed-sensecap-indicator
  -DSENSECAP_INDICATOR
  -DCONFIG_ARDUHAL_LOG_COLORS
@@ -24,10 +35,12 @@ build_flags = ${esp32_base.build_flags}
  -DUSE_ARDUINO_HAL_GPIO

 lib_deps = ${esp32s3_base.lib_deps}
+  ; TODO switch back to official LovyanGFX
  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
-
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:seeed-sensecap-indicator-tft]
 extends = env:seeed-sensecap-indicator
@@ -64,4 +77,5 @@ build_flags =
 lib_deps =
  ${env:seeed-sensecap-indicator.lib_deps}
  ${device-ui_base.lib_deps}
+  ; TODO switch back to official bb_captouch
  https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
--- a/variants/esp32s3/seeed-sensecap-indicator/variant.h
+++ b/variants/esp32s3/seeed-sensecap-indicator/variant.h
@@ -37,6 +37,7 @@
 #define TFT_BL 45
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT (6 | IO_EXPANDER)
--- a/variants/esp32s3/seeed_xiao_s3/platformio.ini
+++ b/variants/esp32s3/seeed_xiao_s3/platformio.ini
@@ -1,4 +1,15 @@
 [env:seeed-xiao-s3]
+custom_meshtastic_hw_model = 81
+custom_meshtastic_hw_model_slug = SEEED_XIAO_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = Seeed Xiao ESP32-S3
+custom_meshtastic_images = seeed-xiao-s3.svg
+custom_meshtastic_tags = Seeed
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = seeed-xiao-s3
 board_level = pr
@@ -6,8 +17,6 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/station-g2/platformio.ini
+++ b/variants/esp32s3/station-g2/platformio.ini
@@ -1,4 +1,15 @@
 [env:station-g2]
+custom_meshtastic_hw_model = 31
+custom_meshtastic_hw_model_slug = STATION_G2
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 2
+custom_meshtastic_display_name = Station G2
+custom_meshtastic_images = station-g2.svg
+custom_meshtastic_tags = B&Q
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = station-g2
 board_level = pr
@@ -8,8 +19,6 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/t-beam-1w/pins_arduino.h
+++ b/variants/esp32s3/t-beam-1w/pins_arduino.h
@@ -0,0 +1,25 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// I2C for OLED and sensors
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+// Default SPI mapped to Radio/SD
+static const uint8_t SS = 15; // LoRa CS
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 12;
+static const uint8_t SCK = 13;
+
+// SD Card CS
+#define SDCARD_CS 10
+
+#endif /* Pins_Arduino_h */
--- a/variants/esp32s3/t-beam-1w/platformio.ini
+++ b/variants/esp32s3/t-beam-1w/platformio.ini
@@ -0,0 +1,14 @@
+; LilyGo T-Beam-1W (1 Watt LoRa with external PA)
+[env:t-beam-1w]
+extends = esp32s3_base
+board = t-beam-1w
+board_build.partitions = default_8MB.csv
+board_check = true
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+
+build_flags = 
+  ${esp32s3_base.build_flags} 
+  -I variants/esp32s3/t-beam-1w
+  -D T_BEAM_1W
--- a/variants/esp32s3/t-beam-1w/variant.h
+++ b/variants/esp32s3/t-beam-1w/variant.h
@@ -0,0 +1,97 @@
+// LilyGo T-Beam-1W variant.h
+// Configuration based on LilyGO utilities.h and RF documentation
+
+// I2C for OLED display (SH1106 at 0x3C)
+#define I2C_SDA 8
+#define I2C_SCL 9
+
+// GPS - Quectel L76K
+#define GPS_RX_PIN 5
+#define GPS_TX_PIN 6
+#define GPS_1PPS_PIN 7
+#define GPS_WAKEUP_PIN 16 // GPS_EN_PIN in LilyGO code
+#define HAS_GPS 1
+#define GPS_BAUDRATE 9600
+
+// Buttons
+#define BUTTON_PIN 0      // BUTTON 1
+#define ALT_BUTTON_PIN 17 // BUTTON 2
+
+// SPI (shared by LoRa and SD)
+#define SPI_MOSI 11
+#define SPI_SCK 13
+#define SPI_MISO 12
+#define SPI_CS 10
+
+// SD Card
+#define HAS_SDCARD
+#define SDCARD_USE_SPI1
+#define SDCARD_CS SPI_CS
+
+// LoRa Radio - SX1262 with 1W PA
+#define USE_SX1262
+
+#define LORA_SCK SPI_SCK
+#define LORA_MISO SPI_MISO
+#define LORA_MOSI SPI_MOSI
+#define LORA_CS 15
+#define LORA_RESET 3
+#define LORA_DIO1 1
+#define LORA_BUSY 38
+
+// CRITICAL: Radio power enable - MUST be HIGH before lora.begin()!
+// GPIO 40 powers the SX1262 + PA module via LDO
+#define SX126X_POWER_EN 40
+
+// TX power offset for external PA (0 = no offset, full SX1262 power)
+#define TX_GAIN_LORA 10
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_BUSY
+#define SX126X_RESET LORA_RESET
+
+// RF switching configuration for 1W PA module
+// DIO2 controls PA (via SX126X_DIO2_AS_RF_SWITCH)
+// CTRL PIN (GPIO 21) controls LNA - must be HIGH during RX
+// Truth table: DIO2=1,CTRL=0 → TX (PA on, LNA off)
+//              DIO2=0,CTRL=1 → RX (PA off, LNA on)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_RXEN 21 // LNA enable - HIGH during RX
+
+// TCXO voltage - required for radio init
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define SX126X_MAX_POWER 22
+#endif
+
+// LED
+#define LED_PIN 18
+#define LED_STATE_ON 1 // HIGH = ON
+
+// Battery ADC
+#define BATTERY_PIN 4
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define BATTERY_SENSE_SAMPLES 30
+#define ADC_MULTIPLIER 2.9333
+
+// NTC temperature sensor
+#define NTC_PIN 14
+
+// Fan control
+#define FAN_CTRL_PIN 41
+// Meshtastic standard fan control pin macro
+#define RF95_FAN_EN FAN_CTRL_PIN
+
+// PA Ramp Time - T-Beam 1W requires >800us stabilization (default is 200us)
+// Value 0x05 = RADIOLIB_SX126X_PA_RAMP_800U
+#define SX126X_PA_RAMP_US 0x05
+
+// Display - SH1106 OLED (128x64)
+#define USE_SH1106
+#define OLED_WIDTH 128
+#define OLED_HEIGHT 64
+
+// 32768 Hz crystal present
+#define HAS_32768HZ 1
--- a/variants/esp32s3/t-deck-pro/platformio.ini
+++ b/variants/esp32s3/t-deck-pro/platformio.ini
@@ -1,11 +1,22 @@
 [env:t-deck-pro]
+custom_meshtastic_hw_model = 102
+custom_meshtastic_hw_model_slug = T_DECK_PRO
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck Pro
+custom_meshtastic_images = tdeck_pro.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck-pro
 board_check = true
 upload_protocol = esptool

 build_flags = 
-  ${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
+  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
  -D T_DECK_PRO
  -D USE_EINK
  -D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
@@ -17,7 +28,11 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/ZinggJM/GxEPD2/archive/refs/tags/1.6.4.zip
+  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
+  zinggjm/GxEPD2@1.6.4
+  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
+  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
  https://github.com/CIRCUITSTATE/CSE_CST328/archive/refs/tags/v0.0.4.zip
+  # renovate: datasource=git-refs depName=BQ27220 packageName=https://github.com/mverch67/BQ27220 gitBranch=main
  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
--- a/variants/esp32s3/t-deck-pro/variant.h
+++ b/variants/esp32s3/t-deck-pro/variant.h
@@ -101,3 +101,5 @@
 #define MODEM_DTR 8
 #define MODEM_RX 10
 #define MODEM_TX 11
+
+#define HAS_PHYSICAL_KEYBOARD 1
--- a/variants/esp32s3/t-deck/platformio.ini
+++ b/variants/esp32s3/t-deck/platformio.ini
@@ -1,5 +1,16 @@
 ; LilyGo T-Deck
 [env:t-deck]
+custom_meshtastic_hw_model = 50
+custom_meshtastic_hw_model_slug = T_DECK
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 1
+custom_meshtastic_display_name = LILYGO T-Deck
+custom_meshtastic_images = t-deck.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_requires_dfu = true
+custom_meshtastic_partition_scheme = 16MB
+
 extends = esp32s3_base
 board = t-deck
 board_check = true
@@ -12,9 +23,12 @@ build_flags = ${esp32s3_base.build_flags}
  -I variants/esp32s3/t-deck

 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0

 [env:t-deck-tft]
 extends = env:t-deck
@@ -68,4 +82,5 @@ build_flags =
 lib_deps =
  ${env:t-deck.lib_deps}
  ${device-ui_base.lib_deps}
+  # renovate: datasource=github-tags depName=bb_captouch packageName=bitbank2/bb_captouch
  https://github.com/bitbank2/bb_captouch/archive/refs/tags/1.3.1.zip
--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -22,6 +22,8 @@
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
+#define HAS_PHYSICAL_KEYBOARD 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
--- a/variants/esp32s3/t-eth-elite/platformio.ini
+++ b/variants/esp32s3/t-eth-elite/platformio.ini
@@ -15,4 +15,5 @@ lib_ignore =

 lib_deps = 
  ${esp32s3_base.lib_deps}
+  # renovate: datasource=github-tags depName=ETHClass2 packageName=meshtastic/ETHClass2
  https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
--- a/variants/esp32s3/t-watch-s3/platformio.ini
+++ b/variants/esp32s3/t-watch-s3/platformio.ini
@@ -1,21 +1,33 @@
 ; LilyGo T-Watch S3
 [env:t-watch-s3]
+custom_meshtastic_hw_model = 51
+custom_meshtastic_hw_model_slug = T_WATCH_S3
+custom_meshtastic_architecture = esp32-s3
+custom_meshtastic_actively_supported = true
+custom_meshtastic_support_level = 3
+custom_meshtastic_display_name = LILYGO T-Watch S3
+custom_meshtastic_images = t-watch-s3.svg
+custom_meshtastic_tags = LilyGo
+custom_meshtastic_partition_scheme = 8MB
+
 extends = esp32s3_base
 board = t-watch-s3
 board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

-build_flags = ${esp32_base.build_flags} 
+build_flags = ${esp32s3_base.build_flags}
  -DT_WATCH_S3
  -Ivariants/esp32s3/t-watch-s3
-  -DPCF8563_RTC=0x51
-  -DHAS_BMA423=1

 lib_deps = ${esp32s3_base.lib_deps}
-	lovyan03/LovyanGFX@^1.2.0
-  lewisxhe/PCF8563_Library@1.0.1
-  adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.9
-  earlephilhower/ESP8266SAM@^1.0.1
-  lewisxhe/SensorLib@0.2.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
+  lewisxhe/SensorLib@0.3.3
+  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
+  adafruit/Adafruit DRV2605 Library@1.2.4
+  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
+  earlephilhower/ESP8266Audio@1.9.9
+  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
+  earlephilhower/ESP8266SAM@1.1.0
--- a/variants/esp32s3/t-watch-s3/variant.h
+++ b/variants/esp32s3/t-watch-s3/variant.h
@@ -18,6 +18,9 @@
 #define TFT_OFFSET_ROTATION 2
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1
+
+#define HAS_DRV2605 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
@@ -40,16 +43,20 @@

 #define HAS_AXP2101

+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
 #define HAS_RTC 1

 #define I2C_SDA 10 // For QMC6310 sensors and screens
 #define I2C_SCL 11 // For QMC6310 sensors and screens

+#define HAS_BMA423 1
 #define BMA4XX_INT 14 // Interrupt for BMA_423 axis sensor

-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
+#define GPS_DEFAULT_NOT_PRESENT 1
+#define GPS_BAUDRATE 38400
+#define GPS_RX_PIN 42
+#define GPS_TX_PIN 41

 #define USE_SX1262
 #define USE_SX1268
--- a/Show More
+++ b/Show More