Merge branch 'master' into apollo

variants/chatter2/variant.h

@@ -6,7 +6,6 @@
 
 // Debugging
 // #define GPS_DEBUG
-// #define GPS_EXTRAVERBOSE
 
 // Lora
 #define USE_LLCC68 // Original Chatter2 with LLCC68 module

variants/heltec_wireless_paper/variant.h

@@ -32,6 +32,9 @@
 #define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
+#define NO_EXT_GPIO 1
+#define NO_GPS 1
+
 // LoRa
 #define USE_SX1262
 

variants/heltec_wireless_paper_v1/variant.h

@@ -32,6 +32,9 @@
 #define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
+#define NO_EXT_GPIO 1
+#define NO_GPS 1
+
 // LoRa
 #define USE_SX1262
 

variants/portduino/platformio.ini

@@ -2,7 +2,8 @@
 extends = portduino_base
 ; The pkg-config commands below optionally add link flags.
 ; the || : is just a "or run the null command" to avoid returning an error code
-build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino -I /usr/include
+build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino
+  -I /usr/include
   !pkg-config --libs libulfius --silence-errors || :
   !pkg-config --libs openssl --silence-errors || :
 board = cross_platform

variants/rak_wismeshtap/platformio.ini

@@ -1,15 +1,18 @@
 ; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
-[env:rak10701]
+[env:rak_wismeshtap]
 extends = nrf52840_base
 board_level = extra
 board = wiscore_rak4631
-build_flags = ${nrf52840_base.build_flags} -Ivariants/rak10701 -D RAK_4631
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -D RAK_4631
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
   -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak10701> +<mesh/eth/> +<mesh/api/> +<mqtt/>
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION=1
+  -DMESHTASTIC_EXCLUDE_WAYPOINT=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtap> +<mesh/eth/> +<mesh/api/> +<mqtt/>
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}

variants/rak_wismeshtap/variant.h

@@ -243,7 +243,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // Therefore must be 1 to keep peripherals powered
 // Power is on the controllable 3V3_S rail
 // #define PIN_GPS_RESET (34)
-#define PIN_GPS_EN PIN_3V3_EN
+// #define PIN_GPS_EN PIN_3V3_EN
 #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
 
 #define GPS_RX_PIN PIN_SERIAL1_RX

variants/t-echo/variant.h

@@ -216,6 +216,8 @@ External serial flash WP25R1635FZUIL0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (2.0F)
 
+#define NO_EXT_GPIO 1
+
 #define HAS_RTC 1
 
 #ifdef __cplusplus