Merge branch 'master' into store-and-forward

2026-01-09 11:27:29 +00:00 · 2025-03-30 20:36:00 -05:00
parent 7e7792aa51 e79d4492e8
commit b2401100de
72 changed files with 760 additions and 145 deletions
--- a/variants/CDEBYTE_E77-MBL/platformio.ini
+++ b/variants/CDEBYTE_E77-MBL/platformio.ini
@@ -1,7 +1,5 @@
 [env:CDEBYTE_E77-MBL]
 extends = stm32_base
-; `ebyte_e77_dev` was added in this commit. Remove when a new release is used in the base.
-platform = https://github.com/platformio/platform-ststm32.git#3208828db447f4373cd303b7f7393c8fc0dae623
 board = ebyte_e77_dev
 board_upload.maximum_size = 233472 ; reserve the last 28KB for filesystem
 board_level = extra
--- a/variants/ELECROW-ThinkNode-M1/platformio.ini
+++ b/variants/ELECROW-ThinkNode-M1/platformio.ini
@@ -0,0 +1,29 @@
+; First prototype eink/nrf52840/sx1262 device
+[env:thinknode_m1]
+extends = nrf52840_base
+board = ThinkNode-M1
+board_check = true
+debug_tool = jlink
+
+# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
+build_flags = ${nrf52840_base.build_flags} -Ivariants/ELECROW-ThinkNode-M1
+  -DELECROW_ThinkNode_M1
+  -DGPS_POWER_TOGGLE
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
+  -DEINK_DISPLAY_MODEL=GxEPD2_154_D67
+  -DEINK_WIDTH=200
+  -DEINK_HEIGHT=200
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted    //20
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=10  ; Minimum interval between BACKGROUND updates          //30
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+;   -DEINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/ELECROW-ThinkNode-M1>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
+  lewisxhe/PCF8563_Library@^1.0.1
+  khoih-prog/nRF52_PWM@^1.0.1
+;upload_protocol = fs
--- a/variants/ELECROW-ThinkNode-M1/variant.cpp
+++ b/variants/ELECROW-ThinkNode-M1/variant.cpp
@@ -0,0 +1,44 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#include "variant.h"
+#include "nrf.h"
+#include "wiring_constants.h"
+#include "wiring_digital.h"
+
+const uint32_t g_ADigitalPinMap[] = {
+    // P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
+    0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
+
+    // P1
+    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
+
+void initVariant()
+{
+    // LED1 & LED2
+    pinMode(PIN_LED1, OUTPUT);
+    ledOff(PIN_LED1);
+
+    pinMode(PIN_LED2, OUTPUT);
+    ledOff(PIN_LED2);
+
+    pinMode(PIN_LED3, OUTPUT);
+    ledOff(PIN_LED3);
+}
--- a/variants/ELECROW-ThinkNode-M1/variant.h
+++ b/variants/ELECROW-ThinkNode-M1/variant.h
@@ -0,0 +1,205 @@
+/*
+ Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+ Copyright (c) 2016 Sandeep Mistry All right reserved.
+ Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+ See the GNU Lesser General Public License for more details.
+ You should have received a copy of the GNU Lesser General Public
+ License along with this library; if not, write to the Free Software
+ Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_ELECROW_EINK_V1_0_
+#define _VARIANT_ELECROW_EINK_V1_0_
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+// 在PinDescription数组中定义的引脚数
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+#define PIN_LED1 -1
+#define PIN_LED2 -1
+#define PIN_LED3 -1
+
+// LED
+#define POWER_LED (32 + 6) // red
+#define LED_POWER (32 + 4)
+#define USER_LED (0 + 13) // green
+// USB_CHECK
+#define USB_CHECK (32 + 3)
+#define ADC_V (0 + 8)
+
+#define LED_RED PIN_LED3
+#define LED_BLUE PIN_LED1
+#define LED_GREEN PIN_LED2
+#define LED_BUILTIN LED_BLUE
+#define LED_CONN PIN_GREEN
+#define LED_STATE_ON 0 // State when LED is lit  // LED灯亮时的状态
+#define M1_buzzer (0 + 6)
+/*
+ * Buttons
+ */
+#define PIN_BUTTON2 (32 + 10)
+#define PIN_BUTTON1 (32 + 7)
+
+// #define PIN_BUTTON1 (0 + 11)
+// #define PIN_BUTTON1 (32 + 7)
+
+// #define BUTTON_CLICK_MS 400
+// #define BUTTON_TOUCH_MS 200
+
+/*
+ * Analog pins
+ */
+#define PIN_A0 (4) // Battery ADC
+
+#define BATTERY_PIN PIN_A0
+
+static const uint8_t A0 = PIN_A0;
+
+#define ADC_RESOLUTION 14
+
+#define PIN_NFC1 (9)
+#define PIN_NFC2 (10)
+
+/*Wire Interfaces*/
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (26)
+#define PIN_WIRE_SCL (27)
+
+/* touch sensor, active high */
+
+#define TP_SER_IO (0 + 11)
+
+#define PIN_RTC_INT (0 + 16) // Interrupt from the PCF8563 RTC
+
+/*
+External serial flash WP25R1635FZUIL0
+*/
+
+// QSPI Pins
+#define PIN_QSPI_SCK (32 + 14)
+#define PIN_QSPI_CS (32 + 15)
+#define PIN_QSPI_IO0 (32 + 12) // MOSI if using two bit interface
+#define PIN_QSPI_IO1 (32 + 13) // MISO if using two bit interface
+#define PIN_QSPI_IO2 (0 + 7)   // WP if using two bit interface (i.e. not used)
+#define PIN_QSPI_IO3 (0 + 5)   // HOLD if using two bit interface (i.e. not used)
+
+// On-board QSPI Flash
+#define EXTERNAL_FLASH_DEVICES MX25R1635F
+#define EXTERNAL_FLASH_USE_QSPI
+
+/*
+ * Lora radio
+ */
+#define SX126X_POWER_EN (0 + 21)
+#define USE_SX1262
+#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
+#define SX126X_DIO1 (0 + 20)
+// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
+// #define SX1262_DIO3 (0 + 21) // This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not
+// drive from the main
+#define SX126X_BUSY (0 + 17)
+#define SX126X_RESET (0 + 25)
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+
+#define PIN_EINK_EN (32 + 11) // Note: this is really just backlight power
+#define PIN_EINK_CS (0 + 30)
+#define PIN_EINK_BUSY (0 + 3)
+#define PIN_EINK_DC (0 + 28)
+#define PIN_EINK_RES (0 + 2)
+#define PIN_EINK_SCLK (0 + 31)
+#define PIN_EINK_MOSI (0 + 29) // also called SDI
+
+// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
+#define PIN_POWER_EN (0 + 12)
+
+#define USE_EINK
+
+#define PIN_SPI1_MISO (32 + 7)
+#define PIN_SPI1_MOSI PIN_EINK_MOSI
+#define PIN_SPI1_SCK PIN_EINK_SCLK
+
+/*
+ * GPS pins
+ */
+// #define HAS_GPS 1
+#define GPS_L76K
+#define GPS_BAUDRATE 9600
+#define PIN_GPS_REINIT (32 + 5)  // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
+#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
+// Seems to be missing on this new board
+// #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
+#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_GPS_PPS (32 + 1) // GPS开关判断
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 2
+
+// For LORA, spi 0
+#define PIN_SPI_MISO (0 + 23)
+#define PIN_SPI_MOSI (0 + 22)
+#define PIN_SPI_SCK (0 + 19)
+
+#define PIN_PWR_EN (0 + 6)
+
+// To debug via the segger JLINK console rather than the CDC-ACM serial device
+// #define USE_SEGGER
+
+// Battery
+// The battery sense is hooked to pin A0 (4)
+// it is defined in the anlaolgue pin section of this file
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (2.02F)
+
+// #define HAS_RTC 0
+// #define HAS_SCREEN 0
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
--- a/variants/ELECROW-ThinkNode-M2/pins_arduino.h
+++ b/variants/ELECROW-ThinkNode-M2/pins_arduino.h
@@ -0,0 +1,28 @@
+// Need this file for ESP32-S3
+// No need to modify this file, changes to pins imported from variant.h
+// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include <variant.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// Serial
+static const uint8_t TX = UART_TX;
+static const uint8_t RX = UART_RX;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = LORA_CS;
+static const uint8_t SCK = LORA_SCK;
+static const uint8_t MOSI = LORA_MOSI;
+static const uint8_t MISO = LORA_MISO;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SCL = I2C_SCL;
+static const uint8_t SDA = I2C_SDA;
+
+#endif /* Pins_Arduino_h */
--- a/variants/ELECROW-ThinkNode-M2/platformio.ini
+++ b/variants/ELECROW-ThinkNode-M2/platformio.ini
@@ -0,0 +1,7 @@
+[env:thinknode_m2]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_M2
+  -I variants/ELECROW-ThinkNode-M2
--- a/variants/ELECROW-ThinkNode-M2/variant.h
+++ b/variants/ELECROW-ThinkNode-M2/variant.h
@@ -0,0 +1,64 @@
+// Status
+#define LED_PIN_POWER 1
+#define BIAS_T_ENABLE LED_PIN_POWER
+#define BIAS_T_VALUE HIGH
+
+#define PIN_BUTTON1 47 // 功能键
+#define PIN_BUTTON2 4  // 电源键
+
+#define POWER_CFG
+#define POWER_CHRG 6
+#define POWER_FULL 42
+
+#define PIN_BUZZER 5
+
+#define I2C_SCL 15
+#define I2C_SDA 16
+
+#define UART_TX 43
+#define UART_RX 44
+
+#define VEXT_ENABLE 46 // for OLED
+#define VEXT_ON_VALUE HIGH
+
+#define SX126X_CS 10
+#define LORA_SCK 12
+#define LORA_MOSI 11
+#define LORA_MISO 13
+#define SX126X_RESET 21
+#define SX126X_BUSY 14
+#define SX126X_DIO1 3
+#define SX126X_DIO2_AS_RF_SWITCH
+// #define SX126X_DIO3 9
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+
+#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
+#define USE_SX1262
+#define LORA_CS SX126X_CS // FIXME: for some reason both are used in /src
+#define LORA_DIO1 SX126X_DIO1
+#define SX126X_POWER_EN 48
+
+// Battery
+// #define BATTERY_PIN 2
+#define BATTERY_PIN 17
+// #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
+#define ADC_CHANNEL ADC2_GPIO17_CHANNEL
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER (1.548F)
+#define BAT_MEASURE_ADC_UNIT 2
+
+#define HAS_SCREEN 1
+#define USE_SH1106 1
+
+// PCF8563 RTC Module
+// #define PCF8563_RTC 0x51
+// #define PIN_RTC_INT 48 // Interrupt from the PCF8563 RTC
+#define HAS_RTC 0
+#define HAS_GPS 0
+
+#define BUTTON_PIN PIN_BUTTON1
+#define BUTTON_PIN_ALT PIN_BUTTON2
--- a/variants/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/MakePython_nRF52840_eink/platformio.ini
@@ -11,7 +11,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_eink -
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  zinggjm/GxEPD2@^1.6.2
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/MakePython_nRF52840_oled/platformio.ini
+++ b/variants/MakePython_nRF52840_oled/platformio.ini
@@ -7,5 +7,5 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_oled -
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_oled>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
 debug_tool = jlink
--- a/variants/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -24,7 +24,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-4-epaper]
 extends = esp32s3_base
@@ -52,7 +52,7 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip

 [env:crowpanel-esp32s3-2-epaper]
 extends = esp32s3_base
@@ -80,4 +80,4 @@ build_flags =
  ;-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2
+  https://github.com/meshtastic/GxEPD2/archive/33db3fa8ee6fc47d160bdb44f8f127c9a9203a10.zip
--- a/variants/heltec_mesh_node_t114/platformio.ini
+++ b/variants/heltec_mesh_node_t114/platformio.ini
@@ -14,4 +14,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/heltec_mesh_node
 lib_deps = 
  ${nrf52840_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
--- a/variants/heltec_vision_master_e213/platformio.ini
+++ b/variants/heltec_vision_master_e213/platformio.ini
@@ -16,7 +16,7 @@ build_flags =
  -DEINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_vision_master_e290/platformio.ini
+++ b/variants/heltec_vision_master_e290/platformio.ini
@@ -20,7 +20,7 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#448c8538129fde3d02a7cb5e6fc81971ad92547f
+  https://github.com/meshtastic/GxEPD2/archive/448c8538129fde3d02a7cb5e6fc81971ad92547f.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_vision_master_t190/platformio.ini
+++ b/variants/heltec_vision_master_t190/platformio.ini
@@ -9,5 +9,5 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  lewisxhe/PCF8563_Library@^1.0.1
-  https://github.com/meshtastic/st7789#bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f
+  https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip
 upload_speed = 921600
--- a/variants/heltec_wireless_paper/platformio.ini
+++ b/variants/heltec_wireless_paper/platformio.ini
@@ -17,7 +17,7 @@ build_flags =
  -D EINK_HASQUIRK_GHOSTING             ; Display model is identified as "prone to ghosting"
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200

--- a/variants/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/heltec_wireless_paper_v1/platformio.ini
@@ -15,6 +15,6 @@ build_flags =
  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
  lewisxhe/PCF8563_Library@^1.0.1
 upload_speed = 115200
--- a/variants/meshlink/platformio.ini
+++ b/variants/meshlink/platformio.ini
@@ -23,7 +23,7 @@ build_flags = ${nrf52840_base.build_flags} -I variants/meshlink -D MESHLINK
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/meshlink_eink/platformio.ini
+++ b/variants/meshlink_eink/platformio.ini
@@ -23,7 +23,7 @@ build_flags = ${nrf52840_base.build_flags} -I variants/meshlink_eink -D MESHLINK
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/meshlink_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/monteops_hw1/platformio.ini
+++ b/variants/monteops_hw1/platformio.ini
@@ -9,7 +9,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/monteops_hw1> +<
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/radiomaster_900_bandit/platformio.ini
+++ b/variants/radiomaster_900_bandit/platformio.ini
@@ -13,4 +13,4 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
  ${esp32_base.lib_deps}
-  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
+  https://github.com/gjelsoe/STK8xxx-Accelerometer/archive/v0.1.1.zip
--- a/variants/rak11310/platformio.ini
+++ b/variants/rak11310/platformio.ini
@@ -15,6 +15,6 @@ lib_deps =
  ${rp2040_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rak2560/platformio.ini
+++ b/variants/rak2560/platformio.ini
@@ -15,7 +15,7 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/beegee-tokyo/RAK-OneWireSerial.git#0.0.2
+  https://github.com/beegee-tokyo/RAK-OneWireSerial/archive/0.0.2.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/rak4631/platformio.ini
+++ b/variants/rak4631/platformio.ini
@@ -17,11 +17,12 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/RAKWireless/RAK12034-BMX160.git#dcead07ffa267d3c906e9ca4a1330ab989e957e2
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
  https://github.com/Woutvstk/SdFat_wrapper25.git#6f8f48d56c15cbeac753560dfeede4a487f81f4c

+
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
 ;upload_protocol = jlink
@@ -42,7 +43,7 @@ build_flags =

 lib_deps =
  ${env:rak4631.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
--- a/variants/rak4631_eth_gw/platformio.ini
+++ b/variants/rak4631_eth_gw/platformio.ini
@@ -27,9 +27,9 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
-  https://github.com/meshtastic/RAK12034-BMX160.git#4821355fb10390ba8557dc43ca29a023bcfbb9d9
+  https://github.com/meshtastic/RAK12034-BMX160/archive/4821355fb10390ba8557dc43ca29a023bcfbb9d9.zip
  bblanchon/ArduinoJson @ 6.21.4
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
@@ -51,7 +51,7 @@ build_flags =

 lib_deps =
  ${env:rak4631_eth_gw.lib_deps}
-  https://github.com/geeksville/Armduino-Semihosting.git#35b538fdf208c3530c1434cd099a08e486672ee4
+  https://github.com/geeksville/Armduino-Semihosting/archive/35b538fdf208c3530c1434cd099a08e486672ee4.zip

 ; NOTE: the pyocd support for semihosting is buggy.  So I switched to using the builtin platformio support for the stlink adapter which worked much better.
 ; However the built in openocd version in platformio has buggy support for TCP to semihosting. 
--- a/variants/rak_wismeshtap/platformio.ini
+++ b/variants/rak_wismeshtap/platformio.ini
@@ -18,7 +18,7 @@ lib_deps =
  ${nrf52840_base.lib_deps}
  ${networking_base.lib_deps}
  melopero/Melopero RV3028@^1.1.0
-  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
+  https://github.com/RAKWireless/RAK13800-W5100S/archive/1.0.2.zip
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  bodmer/TFT_eSPI
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
--- a/variants/seeed-sensecap-indicator/platformio.ini
+++ b/variants/seeed-sensecap-indicator/platformio.ini
@@ -2,7 +2,7 @@
 [env:seeed-sensecap-indicator]
 extends = esp32s3_base
 platform_packages =
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#aef7fef6de3329ed6f75512d46d63bba12b09bb5 ; add_tca9535 (based on 2.0.16)
+    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)

 board = seeed-sensecap-indicator
 board_check = true
@@ -24,7 +24,7 @@ build_flags = ${esp32_base.build_flags}
  -DUSE_ARDUINO_HAL_GPIO

 lib_deps = ${esp32s3_base.lib_deps}
-  https://github.com/mverch67/LovyanGFX#develop
+  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
  earlephilhower/ESP8266Audio@^1.9.9
  earlephilhower/ESP8266SAM@^1.0.1

@@ -49,7 +49,7 @@ build_flags =
  -D HAS_SCREEN=0
  -D HAS_TFT=1
  -D DISPLAY_SET_RESOLUTION
-  -D USE_I2S_BUZZER
+  -D USE_PIN_BUZZER
  -D RAM_SIZE=4096
 	-D LV_LVGL_H_INCLUDE_SIMPLE
 	-D LV_CONF_INCLUDE_SIMPLE
@@ -65,10 +65,9 @@ build_flags =
  -D LGFX_DRIVER=LGFX_INDICATOR
  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_INDICATOR.h\"
  -D VIEW_320x240
-;	-D USE_DOUBLE_BUFFER
  -D USE_PACKET_API

 lib_deps =
  ${env:seeed-sensecap-indicator.lib_deps}
  ${device-ui_base.lib_deps}
-  https://github.com/bitbank2/bb_captouch.git#8f2f06462ff597847921739376a299db93612417 ; alternative touch library supporting FT6x36
+  https://github.com/mverch67/bb_captouch/archive/8626412fe650d808a267791c0eae6e5860c85a5d.zip ; alternative touch library supporting FT6x36
--- a/variants/t-echo/platformio.ini
+++ b/variants/t-echo/platformio.ini
@@ -20,7 +20,7 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/t-echo
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/t-echo>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#55f618961db45a23eff0233546430f1e5a80f63a
+  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
  lewisxhe/PCF8563_Library@^1.0.1
 ;upload_protocol = fs

--- a/variants/t-eth-elite/platformio.ini
+++ b/variants/t-eth-elite/platformio.ini
@@ -14,4 +14,4 @@ lib_ignore =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/ETHClass2#v1.0.0
+  https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
--- a/variants/tlora_t3s3_epaper/platformio.ini
+++ b/variants/tlora_t3s3_epaper/platformio.ini
@@ -15,4 +15,4 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2#b202ebfec6a4821e098cf7a625ba0f6f2400292d
+  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
--- a/variants/tracker-t1000-e/platformio.ini
+++ b/variants/tracker-t1000-e/platformio.ini
@@ -9,7 +9,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/tracker-t1000-e>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/QMA6100P_Arduino_Library.git#14c900b8b2e4feaac5007a7e41e0c1b7f0841136
+  https://github.com/meshtastic/QMA6100P_Arduino_Library/archive/14c900b8b2e4feaac5007a7e41e0c1b7f0841136.zip
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
--- a/variants/xiao_ble/variant.h
+++ b/variants/xiao_ble/variant.h
@@ -143,9 +143,10 @@ static const uint8_t SCK = PIN_SPI_SCK;
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #ifdef EBYTE_E22_900M30S
-// 10dB PA gain and 30dB rated output; based on PA output table from Ebyte Robin <sales06@ebyte.com>
-#define REGULATORY_GAIN_LORA 10
-#define SX126X_MAX_POWER 20
+// 10dB PA gain and 30dB rated output; based on measurements from
+// https://github.com/S5NC/EBYTE_ESP32-S3/blob/main/E22-900M30S%20power%20output%20testing.txt
+#define REGULATORY_GAIN_LORA 7
+#define SX126X_MAX_POWER 22
 #endif
 #ifdef EBYTE_E22_900M33S
 // 25dB PA gain and 33dB rated output; based on TX Power Curve from E22-900M33S_UserManual_EN_v1.0.pdf