Migrate esp32 families to pioarduino platform

2026-01-07 02:18:09 +00:00 · 2025-12-12 12:36:52 -05:00
parent 3a723ceae8
commit aa506ce4ab
124 changed files with 670 additions and 374 deletions
--- a/variants/esp32s3/CDEBYTE_EoRa-S3/variant.h
+++ b/variants/esp32s3/CDEBYTE_EoRa-S3/variant.h
@@ -18,7 +18,7 @@

 // Battery voltage monitoring - TODO: test, currently untested, copied from T3S3 variant
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_MULTIPLIER                                                                                                           \
    2.11 // ratio of voltage divider = 2.0 (R10=1M, R13=1M), plus some undervoltage correction - TODO: this was carried over from
         // the T3S3, test to see if the undervoltage correction is needed.
--- a/variants/esp32s3/ELECROW-ThinkNode-M2/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M2/variant.h
@@ -43,8 +43,8 @@
 // Battery
 // #define BATTERY_PIN 2
 #define BATTERY_PIN 17
-// #define ADC_CHANNEL ADC1_GPIO2_CHANNEL
-#define ADC_CHANNEL ADC2_GPIO17_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_1
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define BATTERY_SENSE_RESOLUTION_BITS 12
 #define BATTERY_SENSE_RESOLUTION 4096.0
 #undef AREF_VOLTAGE
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
@@ -12,7 +12,7 @@
 // USB_CHECK
 #define EXT_PWR_DETECT 12
 #define BATTERY_PIN 8
-#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_7

 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.

--- a/variants/esp32s3/crowpanel-esp32s3-5-epaper/variant.h
+++ b/variants/esp32s3/crowpanel-esp32s3-5-epaper/variant.h
@@ -17,7 +17,7 @@
 // #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to
 //  measure battery voltage ratio of voltage divider = 2.0 (assumption)
 // #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-// #define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_0

 #define I2C_SDA SDA // 21
 #define I2C_SCL SCL // 15
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -14,9 +14,6 @@ lib_deps =
  zinggjm/GxEPD2@1.6.5
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
@@ -28,3 +25,4 @@ build_flags =
  -DBOARD_HAS_PSRAM
  -mfix-esp32-psram-cache-issue
  -DARDUINO_USB_MODE=0
+  -DARDUINO_USB_CDC_ON_BOOT=1
--- a/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini
@@ -12,13 +12,9 @@ lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/diy/my_esp32s3_diy_oled
  -DBOARD_HAS_PSRAM
  -mfix-esp32-psram-cache-issue
-  -DARDUINO_USB_MODE=0
--- a/variants/esp32s3/diy/t-energy-s3_e22/platformio.ini
+++ b/variants/esp32s3/diy/t-energy-s3_e22/platformio.ini
@@ -6,13 +6,10 @@ board_build.partitions = default_16MB.csv
 board_level = extra
 board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
 board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -D ARDUINO_USB_MODE=1
 build_flags =
  ${esp32s3_base.build_flags}
  -D EBYTE_ESP32_S3
  -D BOARD_HAS_PSRAM
-  -D ARDUINO_USB_MODE=0
+  -D ARDUINO_USB_MODE=1
  -D ARDUINO_USB_CDC_ON_BOOT=1
  -I variants/esp32s3/diy/t-energy-s3_e22
--- a/variants/esp32s3/diy/t-energy-s3_e22/variant.h
+++ b/variants/esp32s3/diy/t-energy-s3_e22/variant.h
@@ -4,7 +4,7 @@
 // Battery
 #define BATTERY_PIN 3
 #define ADC_MULTIPLIER 2.0
-#define ADC_CHANNEL ADC1_GPIO3_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_2

 // Button on NanoVHF PCB
 #define BUTTON_PIN 39
--- a/variants/esp32s3/dreamcatcher/platformio.ini
+++ b/variants/esp32s3/dreamcatcher/platformio.ini
@@ -13,7 +13,7 @@ build_flags =

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.1.0

--- a/variants/esp32s3/elecrow_panel/pins_arduino.h
+++ b/variants/esp32s3/elecrow_panel/pins_arduino.h
@@ -15,9 +15,9 @@ static const uint8_t MOSI = 48;
 static const uint8_t MISO = 47;
 static const uint8_t SCK = 41;

-static const uint8_t SPI_MOSI = 6;
-static const uint8_t SPI_SCK = 5;
-static const uint8_t SPI_MISO = 4;
+// static const uint8_t SPI_MOSI = 6;
+// static const uint8_t SPI_SCK = 5;
+// static const uint8_t SPI_MISO = 4;

 static const uint8_t A0 = 1;
 static const uint8_t A1 = 2;
--- a/variants/esp32s3/elecrow_panel/platformio.ini
+++ b/variants/esp32s3/elecrow_panel/platformio.ini
@@ -38,15 +38,19 @@ build_flags = ${esp32s3_base.build_flags} -Os
  -D USE_PACKET_API
  -D HAS_SDCARD
  -D SD_SPI_FREQUENCY=75000000
+  -D SPI_MISO=4
+  -D SPI_MOSI=6
+  -D SPI_SCK=5

 lib_deps = ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
-  earlephilhower/ESP8266SAM@1.0.1
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0 ; note: v1.2.7 breaks the elecrow 7" display functionality
+  earlephilhower/ESP8266SAM@1.1.0
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
+  ; REVISIT note: v1.2.7 breaks the elecrow 7" display functionality
  # renovate: datasource=custom.pio depName=TCA9534 packageName=hideakitai/library/TCA9534
  hideakitai/TCA9534@0.1.1

--- a/variants/esp32s3/esp32-s3-pico/variant.h
+++ b/variants/esp32s3/esp32-s3-pico/variant.h
@@ -22,8 +22,8 @@
 // https://www.waveshare.com/img/devkit/ESP32-S3-Pico/ESP32-S3-Pico-details-inter-1.jpg
 // digram is incorrect labeled as battery pin is getting readings on GPIO7_CH1?
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
-// #define ADC_CHANNEL ADC1_GPIO6_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
+// #define ADC_CHANNEL ADC_CHANNEL_5
 //   ratio of voltage divider = 3.0 (R17=200k, R18=100k)
 #define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic

--- a/variants/esp32s3/esp32s3.ini
+++ b/variants/esp32s3/esp32s3.ini
@@ -6,5 +6,15 @@ monitor_speed = 115200

 build_flags =
  ${esp32_common.build_flags}
-  -DCONFIG_BT_NIMBLE_EXT_ADV=1
-  -DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+  -mtext-section-literals
+
+custom_sdkconfig =
+  ${esp32_common.custom_sdkconfig}
+  CONFIG_BT_NIMBLE_EXT_ADV=y
+  CONFIG_BT_NIMBLE_TRANSPORT_EVT_SIZE=257
+  CONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
+
+lib_deps =
+  ${esp32_common.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
--- a/variants/esp32s3/hackaday-communicator/variant.h
+++ b/variants/esp32s3/hackaday-communicator/variant.h
@@ -22,7 +22,7 @@
 // #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 //  ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
 // #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+// #define ADC_CHANNEL ADC_CHANNEL_3

 // keyboard
 #define I2C_SDA 47 // I2C pins for this board
--- a/variants/esp32s3/heltec_capsule_sensor_v3/variant.h
+++ b/variants/esp32s3/heltec_capsule_sensor_v3/variant.h
@@ -7,7 +7,7 @@
 #define BUTTON_ACTIVE_PULLUP false

 #define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER (4.9 * 1.045)
 #define ADC_CTRL 36 // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/heltec_sensor_hub/variant.h
+++ b/variants/esp32s3/heltec_sensor_hub/variant.h
@@ -5,7 +5,7 @@
 #define BUTTON_ACTIVE_PULLUP false

 #define BATTERY_PIN 7 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER (4.9 * 1.045)
 #define ADC_CTRL 34 // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/heltec_v3/variant.h
+++ b/variants/esp32s3/heltec_v3/variant.h
@@ -16,7 +16,7 @@
 #define ADC_CTRL 37
 #define ADC_CTRL_ENABLED LOW
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045

--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -103,8 +103,8 @@ build_flags =

 lib_deps = ${heltec_v4_base.lib_deps}
  ; ${device-ui_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
  ; TODO revert to official device-ui (when merged)
--- a/variants/esp32s3/heltec_v4/variant.h
+++ b/variants/esp32s3/heltec_v4/variant.h
@@ -4,7 +4,7 @@
 #define ADC_CTRL 37
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045

--- a/variants/esp32s3/heltec_vision_master_e213/platformio.ini
+++ b/variants/esp32s3/heltec_vision_master_e213/platformio.ini
@@ -4,6 +4,7 @@ board = heltec_vision_master_e213
 board_build.partitions = default_8MB.csv
 build_flags = 
  ${esp32s3_base.build_flags}
+  -DBOARD_HAS_PSRAM
  -Ivariants/esp32s3/heltec_vision_master_e213 
  -DHELTEC_VISION_MASTER_E213
  -DUSE_EINK
@@ -32,6 +33,7 @@ build_src_filter =
 build_flags =  
  ${esp32s3_base.build_flags}
  ${inkhud.build_flags}
+  -D BOARD_HAS_PSRAM
  -I variants/esp32s3/heltec_vision_master_e213
  -D HELTEC_VISION_MASTER_E213
 lib_deps =
--- a/variants/esp32s3/heltec_vision_master_e213/variant.h
+++ b/variants/esp32s3/heltec_vision_master_e213/variant.h
@@ -28,7 +28,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5

--- a/variants/esp32s3/heltec_vision_master_e290/variant.h
+++ b/variants/esp32s3/heltec_vision_master_e290/variant.h
@@ -27,7 +27,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 7
-#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_6
 #define ADC_MULTIPLIER 4.9 * 1.03
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5

--- a/variants/esp32s3/heltec_vision_master_t190/variant.h
+++ b/variants/esp32s3/heltec_vision_master_t190/variant.h
@@ -45,7 +45,7 @@
 #define ADC_CTRL 46
 #define ADC_CTRL_ENABLED HIGH
 #define BATTERY_PIN 6
-#define ADC_CHANNEL ADC1_GPIO6_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_5
 #define ADC_MULTIPLIER 4.9 * 1.03        // Voltage divider is roughly 1:1
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high

--- a/variants/esp32s3/heltec_wireless_paper/variant.h
+++ b/variants/esp32s3/heltec_wireless_paper/variant.h
@@ -24,7 +24,7 @@
 #define VEXT_ON_VALUE LOW
 #define ADC_CTRL 19
 #define BATTERY_PIN 20
-#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_9
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
--- a/variants/esp32s3/heltec_wireless_paper_v1/variant.h
+++ b/variants/esp32s3/heltec_wireless_paper_v1/variant.h
@@ -25,7 +25,7 @@
 #define VEXT_ON_VALUE LOW
 #define ADC_CTRL 19
 #define BATTERY_PIN 20
-#define ADC_CHANNEL ADC2_GPIO20_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_9
 #define ADC_MULTIPLIER 2                // Voltage divider is roughly 1:1
 #define BAT_MEASURE_ADC_UNIT 2          // Use ADC2
 #define ADC_ATTENUATION ADC_ATTEN_DB_12 // Voltage divider output is quite high
--- a/variants/esp32s3/heltec_wireless_tracker/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker/platformio.ini
@@ -4,13 +4,15 @@ board = heltec_wireless_tracker
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool

-build_flags = 
+build_flags =
  ${esp32s3_base.build_flags}
  -I variants/esp32s3/heltec_wireless_tracker
  -D HELTEC_TRACKER_V1_1
+  -DARDUINO_USB_CDC_ON_BOOT=1
+  -DARDUINO_USB_MODE=1
  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
--- a/variants/esp32s3/heltec_wireless_tracker/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker/variant.h
@@ -39,7 +39,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045
 #define ADC_CTRL 2     // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
@@ -11,5 +11,5 @@ build_flags =
  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
@@ -35,7 +35,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045

--- a/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
@@ -10,5 +10,5 @@ build_flags =
  -D HELTEC_WIRELESS_TRACKER_V2
 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
--- a/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
@@ -34,7 +34,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045
 #define ADC_CTRL 2     // active HIGH, powers the voltage divider.
--- a/variants/esp32s3/heltec_wsl_v3/variant.h
+++ b/variants/esp32s3/heltec_wsl_v3/variant.h
@@ -10,7 +10,7 @@
 #define ADC_CTRL 37
 #define ADC_CTRL_ENABLED LOW
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9 * 1.045

--- a/variants/esp32s3/icarus/platformio.ini
+++ b/variants/esp32s3/icarus/platformio.ini
@@ -7,12 +7,10 @@ board_build.mcu = esp32s3
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
  ${esp32s3_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32s3/icarus
  -DBOARD_HAS_PSRAM
+  -DARDUINO_USB_CDC_ON_BOOT=1
  -DARDUINO_USB_MODE=0
--- a/variants/esp32s3/mesh-tab/platformio.ini
+++ b/variants/esp32s3/mesh-tab/platformio.ini
@@ -50,8 +50,8 @@ build_src_filter = ${esp32s3_base.build_src_filter}
 lib_deps =
  ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip

 [mesh_tab_xpt2046]
 extends = mesh_tab_base
--- a/variants/esp32s3/mesh-tab/variant.h
+++ b/variants/esp32s3/mesh-tab/variant.h
@@ -10,7 +10,7 @@
 #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider (100k, 220k)
 #define ADC_MULTIPLIER 1.6 // 1.45 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_3

 // LED
 #define LED_PIN 21
--- a/variants/esp32s3/picomputer-s3/platformio.ini
+++ b/variants/esp32s3/picomputer-s3/platformio.ini
@@ -15,8 +15,8 @@ build_flags =

 lib_deps = 
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip

 build_src_filter =
  ${esp32s3_base.build_src_filter}
--- a/variants/esp32s3/picomputer-s3/variant.h
+++ b/variants/esp32s3/picomputer-s3/variant.h
@@ -11,7 +11,7 @@
 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider = 3.0 (R11=200k, R7=100k)
 #define ADC_MULTIPLIER 3.1 // 3.0 with correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_1

 #define USE_RF95 // RFM95/SX127x

--- a/variants/esp32s3/rak3312/variant.h
+++ b/variants/esp32s3/rak3312/variant.h
@@ -40,5 +40,5 @@
 #define GPS_RX_PIN 44

 #define BATTERY_PIN 1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_MULTIPLIER 1.667
--- a/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+++ b/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
@@ -15,8 +15,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip

 [ft5x06]
 extends = mesh_tab_base
--- a/variants/esp32s3/rak_wismesh_tap_v2/variant.h
+++ b/variants/esp32s3/rak_wismesh_tap_v2/variant.h
@@ -54,7 +54,7 @@
 #define USE_VIRTUAL_KEYBOARD 1

 #define BATTERY_PIN 1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_MULTIPLIER 1.667

 #define PIN_BUZZER 38
--- a/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
+++ b/variants/esp32s3/seeed-sensecap-indicator/platformio.ini
@@ -2,7 +2,8 @@
 [env:seeed-sensecap-indicator]
 extends = esp32s3_base
 platform_packages =
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32/archive/aef7fef6de3329ed6f75512d46d63bba12b09bb5.zip ; add_tca9535 (based on 2.0.16)
+  ; Version needs to match the pioarduino version used in esp32_common.ini
+  platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32#60946733b52c30e3d5b58a7158700d65fc1dddae

 board = seeed-sensecap-indicator
 board_check = true
@@ -12,7 +13,7 @@ upload_protocol = esptool
 build_flags = ${esp32s3_base.build_flags}
  -Ivariants/esp32s3/seeed-sensecap-indicator
  -DSENSECAP_INDICATOR
-  -DCONFIG_ARDUHAL_LOG_COLORS
+  -DUSE_ARDUINO_HAL_GPIO
  -DRADIOLIB_DEBUG_SPI=0
  -DRADIOLIB_DEBUG_PROTOCOL=0
  -DRADIOLIB_DEBUG_BASIC=0
@@ -21,13 +22,14 @@ build_flags = ${esp32s3_base.build_flags}
  -DIO_EXPANDER=0x40
  -DIO_EXPANDER_IRQ=42
  ;-DIO_EXPANDER_DEBUG
-  -DUSE_ARDUINO_HAL_GPIO
+  ; mverch's hacks:
+  -D lcd_periph_signals=lcd_periph_rgb_signals

 lib_deps = ${esp32s3_base.lib_deps}
  ; TODO switch back to official LovyanGFX
-  https://github.com/mverch67/LovyanGFX/archive/4c76238c1344162a234ae917b27651af146d6fb2.zip
+  https://github.com/mverch67/LovyanGFX/archive/a1c1278fc9116d1c6cb15a7bb14565aef59a9a97.zip
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.1.0

@@ -43,10 +45,10 @@ build_flags =
  -D HAS_SCREEN=1
  -D HAS_TFT=1
  -D DISPLAY_SET_RESOLUTION
-  -D RAM_SIZE=4096
-	-D LV_LVGL_H_INCLUDE_SIMPLE
-	-D LV_CONF_INCLUDE_SIMPLE
-	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D RAM_SIZE=3072
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
  -D LV_USE_SYSMON=0
  -D LV_USE_PROFILER=0
  -D LV_USE_PERF_MONITOR=0
--- a/variants/esp32s3/seeed-sensecap-indicator/variant.h
+++ b/variants/esp32s3/seeed-sensecap-indicator/variant.h
@@ -4,7 +4,7 @@
 // This board has a serial coprocessor for sensor readings
 #define SENSOR_RP2040_TXD 19
 #define SENSOR_RP2040_RXD 20
-#define SENSOR_PORT_NUM 2
+#define SENSOR_PORT_NUM UART_NUM_2
 #define SENSOR_BAUD_RATE 115200

 #define BUTTON_PIN 38
@@ -14,7 +14,7 @@
 // #define BUTTON_NEED_PULLUP

 // #define BATTERY_PIN 27 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-// #define ADC_CHANNEL ADC1_GPIO27_CHANNEL
+// #define ADC_CHANNEL ADC2_GPIO27_CHANNEL
 // #define ADC_MULTIPLIER 2

 // ST7701 TFT LCD
--- a/variants/esp32s3/seeed_xiao_s3/platformio.ini
+++ b/variants/esp32s3/seeed_xiao_s3/platformio.ini
@@ -6,12 +6,8 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
  ${esp32s3_base.build_flags}
  -D SEEED_XIAO_S3
  -I variants/esp32s3/seeed_xiao_s3
  -DBOARD_HAS_PSRAM 
-  -DARDUINO_USB_MODE=0
--- a/variants/esp32s3/seeed_xiao_s3/variant.h
+++ b/variants/esp32s3/seeed_xiao_s3/variant.h
@@ -37,7 +37,7 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
 #define BUTTON_NEED_PULLUP

 #define BATTERY_PIN -1
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define BATTERY_SENSE_RESOLUTION_BITS 12

 /*Warning:
--- a/variants/esp32s3/station-g2/platformio.ini
+++ b/variants/esp32s3/station-g2/platformio.ini
@@ -8,13 +8,9 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -DARDUINO_USB_MODE=1
 build_flags = 
  ${esp32s3_base.build_flags}
  -D STATION_G2
  -I variants/esp32s3/station-g2
  -DBOARD_HAS_PSRAM
  -DSTATION_G2
-  -DARDUINO_USB_MODE=0
--- a/variants/esp32s3/station-g2/variant.h
+++ b/variants/esp32s3/station-g2/variant.h
@@ -42,7 +42,7 @@ Board Information: https://wiki.uniteng.com/en/meshtastic/station-g2

 /*
 #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_3
 #define ADC_MULTIPLIER 4
 #define BATTERY_SENSE_SAMPLES 15 // Set the number of samples, It has an effect of increasing sensitivity.
 #define BAT_FULLVOLT 8400
--- a/variants/esp32s3/t-deck/platformio.ini
+++ b/variants/esp32s3/t-deck/platformio.ini
@@ -12,10 +12,10 @@ build_flags = ${esp32s3_base.build_flags}
  -I variants/esp32s3/t-deck

 lib_deps = ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.1.0

--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -53,7 +53,7 @@
 #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_3

 // keyboard
 #define I2C_SDA 18 // I2C pins for this board
--- a/variants/esp32s3/t-eth-elite/platformio.ini
+++ b/variants/esp32s3/t-eth-elite/platformio.ini
@@ -10,10 +10,15 @@ build_flags =
  -D HAS_UDP_MULTICAST=1
  -I variants/esp32s3/t-eth-elite

-lib_ignore = 
-    Ethernet
+custom_sdkconfig =
+  ${esp32s3_base.custom_sdkconfig}
+  CONFIG_ETH_ENABLED=y
+  CONFIG_ARDUINO_SELECTIVE_Ethernet=y

-lib_deps = 
-  ${esp32s3_base.lib_deps}
-  # renovate: datasource=github-tags depName=ETHClass2 packageName=meshtastic/ETHClass2
-  https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
+; lib_ignore =
+;     Ethernet
+
+; lib_deps =
+;   ${esp32s3_base.lib_deps}
+;   # renovate: datasource=github-tags depName=ETHClass2 packageName=meshtastic/ETHClass2
+;   https://github.com/meshtastic/ETHClass2/archive/v1.0.0.zip
--- a/variants/esp32s3/t-watch-s3/platformio.ini
+++ b/variants/esp32s3/t-watch-s3/platformio.ini
@@ -11,13 +11,13 @@ build_flags = ${esp32s3_base.build_flags}
  -Ivariants/esp32s3/t-watch-s3

 lib_deps = ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
  lewisxhe/SensorLib@0.3.3
  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
  adafruit/Adafruit DRV2605 Library@1.2.4
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
  earlephilhower/ESP8266SAM@1.1.0
--- a/variants/esp32s3/tlora-pager/platformio.ini
+++ b/variants/esp32s3/tlora-pager/platformio.ini
@@ -17,12 +17,12 @@ build_flags = ${esp32s3_base.build_flags}
  -D ROTARY_BUXTRONICS

 lib_deps = ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
-  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266Audio@2.4.1
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
-  earlephilhower/ESP8266SAM@1.0.1
+  earlephilhower/ESP8266SAM@1.1.0
  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
  adafruit/Adafruit DRV2605 Library@1.2.4
  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
--- a/variants/esp32s3/tlora_t3s3_epaper/variant.h
+++ b/variants/esp32s3/tlora_t3s3_epaper/variant.h
@@ -12,7 +12,7 @@
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to
 // measure battery voltage ratio of voltage divider = 2.0 (assumption)
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0

 #define I2C_SDA SDA
 #define I2C_SCL SCL
--- a/variants/esp32s3/tlora_t3s3_v1/variant.h
+++ b/variants/esp32s3/tlora_t3s3_v1/variant.h
@@ -6,7 +6,7 @@
 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
 // ratio of voltage divider = 2.0 (R42=100k, R43=100k)
 #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0

 #define I2C_SDA 18 // I2C pins for this board
 #define I2C_SCL 17
--- a/variants/esp32s3/tracksenger/internal/variant.h
+++ b/variants/esp32s3/tracksenger/internal/variant.h
@@ -35,7 +35,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9
 #define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/tracksenger/lcd/variant.h
+++ b/variants/esp32s3/tracksenger/lcd/variant.h
@@ -59,7 +59,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9
 #define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/tracksenger/oled/variant.h
+++ b/variants/esp32s3/tracksenger/oled/variant.h
@@ -36,7 +36,7 @@
 #define BUTTON_PIN 0

 #define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
-#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_CHANNEL ADC_CHANNEL_0
 #define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
 #define ADC_MULTIPLIER 4.9
 #define ADC_CTRL 2 // active HIGH, powers the voltage divider. Only on 1.1
--- a/variants/esp32s3/tracksenger/platformio.ini
+++ b/variants/esp32s3/tracksenger/platformio.ini
@@ -12,8 +12,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip

 [env:tracksenger-lcd]
 extends = esp32s3_base
@@ -29,8 +29,8 @@ build_flags =

 lib_deps =
  ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip

 [env:tracksenger-oled]
 extends = esp32s3_base
--- a/variants/esp32s3/unphone/platformio.ini
+++ b/variants/esp32s3/unphone/platformio.ini
@@ -12,7 +12,6 @@ build_flags =
  ${esp32s3_base.build_flags}
  -D UNPHONE
  -I variants/esp32s3/unphone
-  -D ARDUINO_USB_MODE=0
  -D UNPHONE_ACCEL=0
  -D UNPHONE_TOUCHS=0
  -D UNPHONE_SDCARD=0
@@ -27,8 +26,8 @@ build_src_filter =
  +<../variants/esp32s3/unphone>

 lib_deps = ${esp32s3_base.lib_deps}
-  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  # renovate: datasource=git-refs depName=LovyanGFX-develop packageName=https://github.com/lovyan03/LovyanGFX gitBranch=develop
+  https://github.com/lovyan03/LovyanGFX/archive/2689b7c12e384558991d324e19bc67782f986551.zip
  # TODO renovate
  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel