PIO: Remove useless inheritence (references extends env) (#8987)

Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier.
2025-12-21 02:02:23 +00:00 · 2025-12-15 23:38:10 -05:00
parent ed77ba5612
commit 917794ebab
41 changed files with 3 additions and 81 deletions
--- a/variants/esp32/betafpv_900_tx_nano/platformio.ini
+++ b/variants/esp32/betafpv_900_tx_nano/platformio.ini
@@ -13,5 +13,3 @@ board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/nano-g1-explorer/platformio.ini
+++ b/variants/esp32/nano-g1-explorer/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1-explorer]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1_EXPLORER
--- a/variants/esp32/nano-g1/platformio.ini
+++ b/variants/esp32/nano-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:nano-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D NANO_G1
--- a/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_micro/platformio.ini
@@ -15,5 +15,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
+++ b/variants/esp32/radiomaster_900_bandit_nano/platformio.ini
@@ -10,5 +10,3 @@ build_flags =
  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-lib_deps =
-  ${esp32_base.lib_deps}
--- a/variants/esp32/station-g1/platformio.ini
+++ b/variants/esp32/station-g1/platformio.ini
@@ -2,8 +2,6 @@
 [env:station-g1]
 extends = esp32_base
 board = ttgo-t-beam
-lib_deps =
-  ${esp32_base.lib_deps}
 build_flags = 
  ${esp32_base.build_flags}
  -D STATION_G1
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -4,7 +4,6 @@ extends = esp32_base
 board = ttgo-t-beam
 board_level = extra
 board_check = true
-lib_deps = ${esp32_base.lib_deps}
 build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -7,8 +7,6 @@ build_flags =
  ${esp32s3_base.build_flags}
  -D HELTEC_V4
  -I variants/esp32s3/heltec_v4
-lib_deps = 
-  ${esp32s3_base.lib_deps}


 [env:heltec-v4]
--- a/variants/esp32s3/icarus/platformio.ini
+++ b/variants/esp32s3/icarus/platformio.ini
@@ -8,8 +8,6 @@ board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
 platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/m5stack_cores3/platformio.ini
+++ b/variants/esp32s3/m5stack_cores3/platformio.ini
@@ -10,4 +10,3 @@ build_flags =
  -D PRIVATE_HW
  -D M5STACK_CORES3
  -I variants/esp32s3/m5stack_cores3
-lib_deps = ${esp32s3_base.lib_deps}
--- a/variants/esp32s3/seeed_xiao_s3/platformio.ini
+++ b/variants/esp32s3/seeed_xiao_s3/platformio.ini
@@ -6,8 +6,6 @@ board_check = true
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/esp32s3/station-g2/platformio.ini
+++ b/variants/esp32s3/station-g2/platformio.ini
@@ -8,8 +8,6 @@ board_build.mcu = esp32s3
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
-lib_deps =
-  ${esp32s3_base.lib_deps}
 build_unflags =
  ${esp32s3_base.build_unflags}
  -DARDUINO_USB_MODE=1
--- a/variants/native/portduino-buildroot/platformio.ini
+++ b/variants/native/portduino-buildroot/platformio.ini
@@ -5,5 +5,4 @@ extends = portduino_base
 build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
 board = buildroot
 board_level = extra
-lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}
--- a/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DME25LS01_4Y10TD
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MS24SF1/platformio.ini
+++ b/variants/nrf52840/MS24SF1/platformio.ini
@@ -9,8 +9,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MS24SF1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/diy/WashTastic/platformio.ini
+++ b/variants/nrf52840/diy/WashTastic/platformio.ini
@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
  -D PRIVATE_HW
  -D EBYTE_E22_900M30S
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink

 ; NRF52 ProMicro w/ E-Ink display
--- a/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
+++ b/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
@@ -10,6 +10,4 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/feather_diy/platformio.ini
+++ b/variants/nrf52840/feather_diy/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Ivariants/nrf52840/feather_diy
  -Dfeather_diy
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/feather_diy>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
+++ b/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/gat562_mesh_trial_tracker>
-lib_deps =
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/meshlink/platformio.ini
+++ b/variants/nrf52840/meshlink/platformio.ini
@@ -14,8 +14,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_LR11X0=1
  
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/nrf52840/meshtiny/platformio.ini
+++ b/variants/nrf52840/meshtiny/platformio.ini
@@ -7,5 +7,3 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/nrf52840/meshtiny -D MESHT
  -D USE_PIN_BUZZER
  -D MESHTASTIC_EXCLUDE_GPS=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshtiny>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/nrf52832.ini
+++ b/variants/nrf52840/nrf52832.ini
@@ -4,6 +4,3 @@ extends = nrf52_base
 build_flags =
  ${nrf52_base.build_flags}
  -DSERIAL_BUFFER_SIZE=1024
-
-lib_deps =
-  ${nrf52_base.lib_deps}
--- a/variants/nrf52840/rak_wismeshtag/platformio.ini
+++ b/variants/nrf52840/rak_wismeshtag/platformio.ini
@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_LR11X0=1
  -DMESHTASTIC_EXCLUDE_WIFI=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak_wismeshtag>
-lib_deps =
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/seeed_solar_node/platformio.ini
+++ b/variants/nrf52840/seeed_solar_node/platformio.ini
@@ -9,6 +9,4 @@ build_flags = ${nrf52840_base.build_flags}
  -I src/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_solar_node>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/seeed_wio_tracker_L1/platformio.ini
+++ b/variants/nrf52840/seeed_wio_tracker_L1/platformio.ini
@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
  -I src/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_wio_tracker_L1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/seeed_wio_tracker_L1_eink/platformio.ini
+++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/platformio.ini
@@ -44,4 +44,4 @@ build_src_filter =
 lib_deps =
  ${inkhud.lib_deps} ; Before base libs_deps, so we use ZinggJM/GFXRoot instead of AdafruitGFX (saves space)
  ${nrf52840_base.lib_deps}
-debug_tool = jlink
+debug_tool = jlink
--- a/variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini
+++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini
@@ -11,8 +11,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DGPS_L76K
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_xiao_nrf52840_kit>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/nrf52840/t-echo/platformio.ini
+++ b/variants/nrf52840/t-echo/platformio.ini
@@ -41,4 +41,4 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
--- a/variants/nrf52840/wio-t1000-s/platformio.ini
+++ b/variants/nrf52840/wio-t1000-s/platformio.ini
@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DWIO_WM1110
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/wio-t1000-s>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = jlink
--- a/variants/nrf52840/wio-tracker-wm1110/platformio.ini
+++ b/variants/nrf52840/wio-tracker-wm1110/platformio.ini
@@ -9,7 +9,5 @@ build_flags = ${nrf52840_base.build_flags}
  -DWIO_WM1110
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/wio-tracker-wm1110>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
+;upload_protocol = jlink
--- a/variants/rp2040/challenger_2040_lora/platformio.ini
+++ b/variants/rp2040/challenger_2040_lora/platformio.ini
@@ -10,7 +10,5 @@ build_flags =
  -I variants/rp2040/challenger_2040_lora
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rp2040/ec_catsniffer/platformio.ini
+++ b/variants/rp2040/ec_catsniffer/platformio.ini
@@ -9,7 +9,5 @@ build_flags =
  -I variants/rp2040/ec_catsniffer
  -D DEBUG_RP2040_PORT=Serial
  ; -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap
--- a/variants/rp2040/feather_rp2040_rfm95/platformio.ini
+++ b/variants/rp2040/feather_rp2040_rfm95/platformio.ini
@@ -10,7 +10,5 @@ build_flags =
  -I variants/rp2040/feather_rp2040_rfm95
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rp2040/nibble_rp2040/platformio.ini
+++ b/variants/rp2040/nibble_rp2040/platformio.ini
@@ -10,7 +10,5 @@ build_flags =
  -I variants/rp2040/nibble_rp2040
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rp2040/rp2040-lora/platformio.ini
+++ b/variants/rp2040/rp2040-lora/platformio.ini
@@ -9,7 +9,5 @@ build_flags =
  -I variants/rp2040/rp2040-lora
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rp2040/rpipico-slowclock/platformio.ini
+++ b/variants/rp2040/rpipico-slowclock/platformio.ini
@@ -21,8 +21,6 @@ build_flags =
  -DHW_SPI1_DEVICE
  -g
  -DNO_USB
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}
  -g
  -DNO_USB
--- a/variants/rp2040/rpipico/platformio.ini
+++ b/variants/rp2040/rpipico/platformio.ini
@@ -11,7 +11,5 @@ build_flags =
  -I variants/rp2040/rpipico
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2040_base.lib_deps}
 debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rp2040/senselora_rp2040/platformio.ini
+++ b/variants/rp2040/senselora_rp2040/platformio.ini
@@ -9,5 +9,3 @@ build_flags = ${rp2040_base.build_flags}
  -D SENSELORA_RP2040
  -I variants/rp2040/senselora_rp2040
  -D DEBUG_RP2040_PORT=Serial
-lib_deps =
-  ${rp2040_base.lib_deps}
--- a/variants/rp2350/rpipico2/platformio.ini
+++ b/variants/rp2350/rpipico2/platformio.ini
@@ -11,7 +11,5 @@ build_flags =
  -I variants/rp2350/rpipico2
  -D DEBUG_RP2040_PORT=Serial
  -D HW_SPI1_DEVICE
-lib_deps =
-  ${rp2350_base.lib_deps}
 debug_build_flags = ${rp2350_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/stm32/wio-e5/platformio.ini
+++ b/variants/stm32/wio-e5/platformio.ini
@@ -19,7 +19,3 @@ build_flags =
  -DGPS_SERIAL_PORT=Serial2

 upload_port = stlink
-
-lib_deps =
-  ${stm32_base.lib_deps}
-  # Add your custom sensor here!