PIO: Remove useless inheritence (references extends env) (#8987)

Remove lib_deps section for all PlatformIO envs which are unneeded (only references the `extends` lib_deps, thus pointless) This makes the configs more concise and make future PIO variants/ libdeps audits easier.
2025-12-30 22:50:57 +00:00 · 2025-12-15 23:38:10 -05:00
parent ed77ba5612
commit 917794ebab
41 changed files with 3 additions and 81 deletions
--- a/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DME25LS01_4Y10TD
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MS24SF1/platformio.ini
+++ b/variants/nrf52840/MS24SF1/platformio.ini
@@ -9,8 +9,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MS24SF1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/diy/WashTastic/platformio.ini
+++ b/variants/nrf52840/diy/WashTastic/platformio.ini
@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
  -D PRIVATE_HW
  -D EBYTE_E22_900M30S
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink

 ; NRF52 ProMicro w/ E-Ink display
--- a/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
+++ b/variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262/platformio.ini
@@ -10,6 +10,4 @@ build_flags = ${nrf52840_base.build_flags}
  -Isrc/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/seeed-xiao-nrf52840-wio-sx1262>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/feather_diy/platformio.ini
+++ b/variants/nrf52840/feather_diy/platformio.ini
@@ -6,8 +6,6 @@ build_flags = ${nrf52840_base.build_flags}
  -Ivariants/nrf52840/feather_diy
  -Dfeather_diy
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/feather_diy>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
+++ b/variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/gat562_mesh_trial_tracker>
-lib_deps =
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/meshlink/platformio.ini
+++ b/variants/nrf52840/meshlink/platformio.ini
@@ -14,8 +14,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_LR11X0=1
  
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
--- a/variants/nrf52840/meshtiny/platformio.ini
+++ b/variants/nrf52840/meshtiny/platformio.ini
@@ -7,5 +7,3 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/nrf52840/meshtiny -D MESHT
  -D USE_PIN_BUZZER
  -D MESHTASTIC_EXCLUDE_GPS=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshtiny>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/nrf52832.ini
+++ b/variants/nrf52840/nrf52832.ini
@@ -4,6 +4,3 @@ extends = nrf52_base
 build_flags =
  ${nrf52_base.build_flags}
  -DSERIAL_BUFFER_SIZE=1024
-
-lib_deps =
-  ${nrf52_base.lib_deps}
--- a/variants/nrf52840/rak_wismeshtag/platformio.ini
+++ b/variants/nrf52840/rak_wismeshtag/platformio.ini
@@ -12,5 +12,3 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_LR11X0=1
  -DMESHTASTIC_EXCLUDE_WIFI=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak_wismeshtag>
-lib_deps =
-  ${nrf52840_base.lib_deps}
--- a/variants/nrf52840/seeed_solar_node/platformio.ini
+++ b/variants/nrf52840/seeed_solar_node/platformio.ini
@@ -9,6 +9,4 @@ build_flags = ${nrf52840_base.build_flags}
  -I src/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_solar_node>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/seeed_wio_tracker_L1/platformio.ini
+++ b/variants/nrf52840/seeed_wio_tracker_L1/platformio.ini
@@ -8,6 +8,4 @@ build_flags = ${nrf52840_base.build_flags}
  -I src/platform/nrf52/softdevice/nrf52
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_wio_tracker_L1>
-lib_deps =
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
--- a/variants/nrf52840/seeed_wio_tracker_L1_eink/platformio.ini
+++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/platformio.ini
@@ -44,4 +44,4 @@ build_src_filter =
 lib_deps =
  ${inkhud.lib_deps} ; Before base libs_deps, so we use ZinggJM/GFXRoot instead of AdafruitGFX (saves space)
  ${nrf52840_base.lib_deps}
-debug_tool = jlink
+debug_tool = jlink
--- a/variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini
+++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/platformio.ini
@@ -11,8 +11,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DGPS_L76K
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/seeed_xiao_nrf52840_kit>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
--- a/variants/nrf52840/t-echo/platformio.ini
+++ b/variants/nrf52840/t-echo/platformio.ini
@@ -41,4 +41,4 @@ build_src_filter =
 lib_deps = 
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
-  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/PCF8563_Library@1.0.1
--- a/variants/nrf52840/wio-t1000-s/platformio.ini
+++ b/variants/nrf52840/wio-t1000-s/platformio.ini
@@ -10,8 +10,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DWIO_WM1110
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/wio-t1000-s>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = jlink
--- a/variants/nrf52840/wio-tracker-wm1110/platformio.ini
+++ b/variants/nrf52840/wio-tracker-wm1110/platformio.ini
@@ -9,7 +9,5 @@ build_flags = ${nrf52840_base.build_flags}
  -DWIO_WM1110
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/wio-tracker-wm1110>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
+;upload_protocol = jlink