use a real macaddr on the nrf52

docs/software/nrf52-TODO.md

@@ -4,4 +4,56 @@
 #define PIN_SPI_MOSI         (45)
 #define PIN_SPI_SCK          (47)
 #define PIN_WIRE_SDA         (26)
-#define PIN_WIRE_SCL         (27)
+#define PIN_WIRE_SCL         (27)
+
+
+/*
+per
+https://docs.platformio.org/en/latest/tutorials/nordicnrf52/arduino_debugging_unit_testing.html
+
+ardunino github is here https://github.com/sandeepmistry/arduino-nRF5
+devboard hw docs here:
+https://infocenter.nordicsemi.com/topic/ug_nrf52840_dk/UG/nrf52840_DK/hw_buttons_leds.html?cp=4_0_4_7_6
+
+https://docs.platformio.org/en/latest/boards/nordicnrf52/nrf52840_dk_adafruit.html
+
+must install adafruit bootloader first!
+https://learn.adafruit.com/circuitpython-on-the-nrf52/nrf52840-bootloader
+see link above and turn off jlink filesystem if we see unreliable serial comms
+over USBCDC
+
+adafruit bootloader install commands (from their readme)
+kevinh@kevin-server:~/.platformio/packages/framework-arduinoadafruitnrf52/bootloader$
+nrfjprog -e -f nrf52 Erasing user available code and UICR flash areas. Applying
+system reset.
+kevinh@kevin-server:~/.platformio/packages/framework-arduinoadafruitnrf52/bootloader$
+nrfjprog --program pca10056/pca10056_bootloader-0.3.2_s140_6.1.1.hex -f nrf52
+Parsing hex file.
+Reading flash area to program to guarantee it is erased.
+Checking that the area to write is not protected.
+Programming device.
+kevinh@kevin-server:~/.platformio/packages/framework-arduinoadafruitnrf52/bootloader$
+nrfjprog --reset -f nrf52 Applying system reset. Run.
+
+install jlink tools from here:
+https://www.segger.com/downloads/jlink#J-LinkSoftwareAndDocumentationPack
+
+install nrf tools from here:
+https://www.nordicsemi.com/Software-and-tools/Development-Tools/nRF-Command-Line-Tools/Download#infotabs
+
+examples of turning off the loop call to save power:
+https://learn.adafruit.com/bluefruit-nrf52-feather-learning-guide/advertising-beacon
+
+example of a more complex BLE service:
+https://learn.adafruit.com/bluefruit-nrf52-feather-learning-guide/custom-hrm
+*/
+
+// See g_ADigitalPinMap to see how arduino maps to the real gpio#s - and all in
+// P0
+#define LED1 14
+#define LED2 13
+
+/*
+good led ble demo:
+https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/master/libraries/Bluefruit52Lib/examples/Peripheral/nrf_blinky/nrf_blinky.ino
+*/