Merge branch 'master' into lora-type

variants/diy/platformio.ini

@@ -1,156 +0,0 @@
-; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
-[env:meshtastic-diy-v1]
-extends = esp32_base
-board = esp32doit-devkit-v1
-board_check = true
-build_flags =
-  ${esp32_base.build_flags}
-  -D DIY_V1
-  -D EBYTE_E22
-  -I variants/diy/v1
-
-; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules
-[env:meshtastic-diy-v1_1]
-extends = esp32_base
-board = esp32doit-devkit-v1
-board_level = extra
-build_flags =
-  ${esp32_base.build_flags}
-  -D DIY_V1
-  -D EBYTE_E22
-  -I variants/diy/v1_1
-
-; Port to Disaster Radio's ESP32-v3 Dev Board
-[env:meshtastic-dr-dev]
-extends = esp32_base
-board = esp32doit-devkit-v1
-board_upload.maximum_size = 4194304
-board_upload.maximum_ram_size = 532480
-build_flags =
-  ${esp32_base.build_flags}
-  -D DR_DEV
-  -D EBYTE_E22
-  -I variants/diy/dr-dev
-
-; Hydra - Meshtastic DIY v1 hardware with some specific changes
-[env:hydra]
-extends = esp32_base
-board = esp32doit-devkit-v1
-build_flags =
-  ${esp32_base.build_flags}
-  -D DIY_V1
-  -I variants/diy/hydra
-
-
-; Promicro + E22(0)-xxxMM / RA-01SH modules board variant - DIY - without TCXO
-[env:nrf52_promicro_diy_xtal]
-extends = nrf52840_base
-board = promicro-nrf52840
-board_level = extra
-build_flags = ${nrf52840_base.build_flags}
-  -I variants/diy/nrf52_promicro_diy_xtal
-  -D NRF52_PROMICRO_DIY
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_xtal>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
-debug_tool = jlink
-
-
-; Promicro + E22(0)-xxxM / HT-RA62 modules board variant - DIY - with TCXO
-[env:nrf52_promicro_diy_tcxo]
-extends = nrf52840_base
-board = promicro-nrf52840
-build_flags = ${nrf52840_base.build_flags}
-  -I variants/diy/nrf52_promicro_diy_tcxo
-  -D NRF52_PROMICRO_DIY
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/nrf52_promicro_diy_tcxo>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
-debug_tool = jlink
-
-; NRF52 ProMicro w/ E-Ink display
-[env:nrf52_promicro_diy-inkhud]
-board_level = extra
-extends = nrf52840_base, inkhud
-board = promicro-nrf52840
-build_flags =
-  ${nrf52840_base.build_flags}
-  ${inkhud.build_flags}
-  -I variants/diy/nrf52_promicro_diy_tcxo
-  -D NRF52_PROMICRO_DIY
-build_src_filter =
-  ${nrf52_base.build_src_filter}
-  ${inkhud.build_src_filter}
-  +<../variants/diy/nrf52_promicro_diy_tcxo>
-lib_deps =
-  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
-  ${nrf52840_base.lib_deps}
-extra_scripts =
-  ${env.extra_scripts}
-  variants/diy/nrf52_promicro_diy_tcxo/custom_build_tasks.py ; Add to PIO's Project Tasks pane: preset builds for common displays
-
-; Seeed Xiao BLE: https://www.digikey.com/en/products/detail/seeed-technology-co-ltd/102010448/16652893
-[env:xiao_ble]
-extends = env:seeed_xiao_nrf52840_kit
-board_level = extra
-build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DXIAO_BLE_LEGACY_PINOUT -DEBYTE_E22 -DEBYTE_E22_900M30S
-build_unflags = -DGPS_L76K
-
-; Seeed XIAO nRF52840 + EBYTE E22-900M30S - Pinout matching Wio-SX1262 (SKU 113010003)
-[env:seeed_xiao_nrf52840_e22_900m30s]
-extends = env:seeed_xiao_nrf52840_kit
-board_level = extra
-build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DEBYTE_E22 -DEBYTE_E22_900M30S
-build_unflags = -DGPS_L76K
-
-; Seeed XIAO nRF52840 + EBYTE E22-900M33S - Pinout matching Wio-SX1262 (SKU 113010003)
-[env:seeed_xiao_nrf52840_e22_900m33s]
-extends = env:seeed_xiao_nrf52840_kit
-board_level = extra
-build_flags = ${env:seeed_xiao_nrf52840_kit.build_flags} -D PRIVATE_HW -DEBYTE_E22 -DEBYTE_E22_900M33S
-build_unflags = -DGPS_L76K
-
-; Seeed XIAO nRF52840 + XIAO Wio SX1262 DIY
-[env:seeed-xiao-nrf52840-wio-sx1262]
-board = xiao_ble_sense
-extends = nrf52840_base
-board_level = extra
-build_flags = ${nrf52840_base.build_flags} -Ivariants/diy/seeed-xiao-nrf52840-wio-sx1262 -D PRIVATE_HW
-  -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52
-board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/diy/seeed-xiao-nrf52840-wio-sx1262>
-lib_deps =
-  ${nrf52840_base.lib_deps}
-debug_tool = jlink
-
-; NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
-[env:t-energy-s3_e22]
-extends = esp32s3_base
-board = esp32-s3-devkitc-1
-board_build.partitions = default_16MB.csv
-board_level = extra
-board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
-board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
-build_unflags =
-  ${esp32s3_base.build_unflags}
-  -D ARDUINO_USB_MODE=1
-build_flags =
-  ${esp32s3_base.build_flags}
-  -D EBYTE_ESP32_S3
-  -D BOARD_HAS_PSRAM
-  -D ARDUINO_USB_MODE=0
-  -D ARDUINO_USB_CDC_ON_BOOT=1
-  -I variants/diy/t-energy-s3_e22
-
-; ESP32 C3 Super Mini Development Board
-; https://www.espboards.dev/esp32/esp32-c3-super-mini/
-[env:esp32c3_super_mini]
-extends = esp32c3_base
-board = esp32-c3-devkitm-1
-build_flags =
-  ${esp32_base.build_flags}
-  -D PRIVATE_HW
-  -I variants/diy/esp32c3_super_mini
-  -D ARDUINO_USB_MODE=1
-  -D ARDUINO_USB_CDC_ON_BOOT=1
-board_level = extra

variants/esp32/betafpv_2400_tx_micro/platformio.ini

@@ -8,11 +8,11 @@ build_flags =
   -D VTABLES_IN_FLASH=1
   -D CONFIG_DISABLE_HAL_LOCKS=1
   -O2
-  -I variants/betafpv_2400_tx_micro
+  -I variants/esp32/betafpv_2400_tx_micro
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
 lib_deps =
   ${esp32_base.lib_deps}
-  adafruit/Adafruit NeoPixel @ ^1.12.0
+  adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32/betafpv_900_tx_nano/platformio.ini

@@ -8,10 +8,10 @@ build_flags =
   -D VTABLES_IN_FLASH=1
   -D CONFIG_DISABLE_HAL_LOCKS=1
   -O2
-  -I variants/betafpv_900_tx_nano
+  -I variants/esp32/betafpv_900_tx_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
 upload_speed = 460800
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32_base.lib_deps}

variants/esp32/chatter2/platformio.ini

@@ -5,7 +5,7 @@ board = esp32doit-devkit-v1
 build_flags =
   ${esp32_base.build_flags}
   -D CHATTER_2
-  -I variants/chatter2
+  -I variants/esp32/chatter2
   
 lib_deps =
   ${esp32_base.lib_deps}

variants/esp32/diy/dr-dev/platformio.ini

@@ -0,0 +1,11 @@
+; Port to Disaster Radio's ESP32-v3 Dev Board
+[env:meshtastic-dr-dev]
+extends = esp32_base
+board = esp32doit-devkit-v1
+board_upload.maximum_size = 4194304
+board_upload.maximum_ram_size = 532480
+build_flags =
+  ${esp32_base.build_flags}
+  -D DR_DEV
+  -D EBYTE_E22
+  -I variants/esp32/diy/dr-dev

variants/esp32/diy/hydra/platformio.ini

@@ -0,0 +1,8 @@
+; Hydra - Meshtastic DIY v1 hardware with some specific changes
+[env:hydra]
+extends = esp32_base
+board = esp32doit-devkit-v1
+build_flags =
+  ${esp32_base.build_flags}
+  -D DIY_V1
+  -I variants/esp32/diy/hydra

variants/esp32/diy/v1/platformio.ini

@@ -0,0 +1,10 @@
+; Meshtastic DIY v1 by Nano VHF Schematic based on ESP32-WROOM-32 (38 pins) devkit & EBYTE E22 SX1262/SX1268 module
+[env:meshtastic-diy-v1]
+extends = esp32_base
+board = esp32doit-devkit-v1
+board_check = true
+build_flags =
+  ${esp32_base.build_flags}
+  -D DIY_V1
+  -D EBYTE_E22
+  -I variants/esp32/diy/v1

variants/esp32/diy/v1_1/platformio.ini

@@ -0,0 +1,10 @@
+; Meshtastic DIY v1.1 new schematic based on ESP32-WROOM-32 & SX1262/SX1268 modules
+[env:meshtastic-diy-v1_1]
+extends = esp32_base
+board = esp32doit-devkit-v1
+board_level = extra
+build_flags =
+  ${esp32_base.build_flags}
+  -D DIY_V1
+  -D EBYTE_E22
+  -I variants/esp32/diy/v1_1

variants/esp32/hackerboxes_esp32_io/platformio.ini

@@ -5,7 +5,7 @@ board_level = extra
 build_flags = 
   ${esp32_base.build_flags}
   -D PRIVATE_HW
-  -I variants/hackerboxes_esp32_io
+  -I variants/esp32/hackerboxes_esp32_io
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0

variants/esp32/heltec_v1/platformio.ini

@@ -4,4 +4,6 @@ extends = esp32_base
 board_level = extra
 board = heltec_wifi_lora_32
 build_flags = 
-  ${esp32_base.build_flags} -D HELTEC_V1 -I variants/heltec_v1
+  ${esp32_base.build_flags}
+  -D HELTEC_V1
+  -I variants/esp32/heltec_v1

variants/esp32/heltec_v2.1/platformio.ini

@@ -4,5 +4,7 @@ board_level = extra
 extends = esp32_base
 board = heltec_wifi_lora_32_V2
 build_flags = 
-  ${esp32_base.build_flags} -D HELTEC_V2_1 -I variants/heltec_v2.1
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  ${esp32_base.build_flags}
+  -D HELTEC_V2_1
+  -I variants/esp32/heltec_v2.1
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

variants/esp32/heltec_v2/platformio.ini

@@ -4,4 +4,6 @@ board_level = extra
 extends = esp32_base
 board = heltec_wifi_lora_32_V2
 build_flags = 
-  ${esp32_base.build_flags} -D HELTEC_V2_0 -I variants/heltec_v2
+  ${esp32_base.build_flags}
+  -D HELTEC_V2_0
+  -I variants/esp32/heltec_v2

variants/esp32/heltec_wireless_bridge/platformio.ini

@@ -4,7 +4,7 @@ extends = esp32_base
 board = heltec_wifi_lora_32
 build_flags = 
   ${esp32_base.build_flags}
-  -I variants/heltec_wireless_bridge
+  -I variants/esp32/heltec_wireless_bridge
   -D HELTEC_WIRELESS_BRIDGE
   -D BOARD_HAS_PSRAM
   -D RADIOLIB_EXCLUDE_LR11X0=1

variants/esp32/heltec_wsl_v2.1/platformio.ini

@@ -3,5 +3,7 @@ extends = esp32_base
 board = heltec_wireless_stick_lite
 board_level = extra
 build_flags =
-  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/heltec_wsl_v2.1
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  ${esp32_base.build_flags}
+  -D PRIVATE_HW
+  -I variants/esp32/heltec_wsl_v2.1
+  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

variants/esp32/m5stack_core/platformio.ini

@@ -5,7 +5,8 @@ monitor_filters = esp32_exception_decoder
 build_src_filter = 
   ${esp32_base.build_src_filter}
 build_flags = 
-  ${esp32_base.build_flags} -I variants/m5stack_core
+  ${esp32_base.build_flags}
+  -I variants/esp32/m5stack_core
   -DILI9341_DRIVER
   -DM5STACK
   -DUSER_SETUP_LOADED

variants/esp32/m5stack_coreink/platformio.ini

@@ -5,7 +5,8 @@ board_check = true
 build_src_filter = 
   ${esp32_base.build_src_filter}
 build_flags = 
-  ${esp32_base.build_flags} -I variants/m5stack_coreink
+  ${esp32_base.build_flags}
+  -I variants/esp32/m5stack_coreink
   ;-D RADIOLIB_VERBOSE
   -Ofast
   -D__MCUXPRESSO

variants/esp32/nano-g1-explorer/platformio.ini

@@ -5,4 +5,6 @@ board = ttgo-t-beam
 lib_deps =
   ${esp32_base.lib_deps}
 build_flags = 
-  ${esp32_base.build_flags} -D NANO_G1_EXPLORER  -I variants/nano-g1-explorer
+  ${esp32_base.build_flags}
+  -D NANO_G1_EXPLORER
+  -I variants/esp32/nano-g1-explorer

variants/esp32/nano-g1/platformio.ini

@@ -5,4 +5,6 @@ board = ttgo-t-beam
 lib_deps =
   ${esp32_base.lib_deps}
 build_flags = 
-  ${esp32_base.build_flags} -D NANO_G1  -I variants/nano-g1
+  ${esp32_base.build_flags}
+  -D NANO_G1
+  -I variants/esp32/nano-g1

variants/esp32/radiomaster_900_bandit/platformio.ini

@@ -8,7 +8,7 @@ build_flags =
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -DHAS_STK8XXX=1
   -O2
-  -Ivariants/radiomaster_900_bandit
+  -I variants/esp32/radiomaster_900_bandit
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =

variants/esp32/radiomaster_900_bandit_micro/platformio.ini

@@ -12,8 +12,8 @@ build_flags =
   -DVTABLES_IN_FLASH=1
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -O2
-  -Ivariants/radiomaster_900_bandit_nano
+  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32_base.lib_deps}

variants/esp32/radiomaster_900_bandit_nano/platformio.ini

@@ -7,8 +7,8 @@ build_flags =
   -DVTABLES_IN_FLASH=1
   -DCONFIG_DISABLE_HAL_LOCKS=1
   -O2
-  -Ivariants/radiomaster_900_bandit_nano
+  -I variants/esp32/radiomaster_900_bandit_nano
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32_base.lib_deps}

variants/esp32/rak11200/platformio.ini

@@ -0,0 +1,10 @@
+[env:rak11200]
+extends = esp32_base
+board = wiscore_rak11200
+board_level = pr
+board_check = true
+build_flags = 
+  ${esp32_base.build_flags}
+  -D RAK_11200
+  -I variants/esp32/rak11200
+upload_speed = 115200

variants/esp32/station-g1/platformio.ini

@@ -5,4 +5,6 @@ board = ttgo-t-beam
 lib_deps =
   ${esp32_base.lib_deps}
 build_flags = 
-  ${esp32_base.build_flags} -D STATION_G1  -I variants/station-g1
+  ${esp32_base.build_flags}
+  -D STATION_G1
+  -I variants/esp32/station-g1

variants/esp32/tbeam/platformio.ini

@@ -2,12 +2,15 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
+board_level = pr
 board_check = true
 lib_deps =
   ${esp32_base.lib_deps}
 build_flags = 
-  ${esp32_base.build_flags} -D TBEAM_V10  -I variants/tbeam
+  ${esp32_base.build_flags}
+  -D TBEAM_V10
+  -I variants/esp32/tbeam
   -DGPS_POWER_TOGGLE ; comment this line to disable double press function on the user button to turn off gps entirely.
   -DBOARD_HAS_PSRAM
   -mfix-esp32-psram-cache-issue
-upload_speed = 921600
+upload_speed = 921600

variants/esp32/tbeam_v07/platformio.ini

@@ -4,4 +4,6 @@ board_level = extra
 extends = esp32_base
 board = ttgo-t-beam
 build_flags = 
-  ${esp32_base.build_flags} -D TBEAM_V07 -I variants/tbeam_v07
+  ${esp32_base.build_flags}
+  -D TBEAM_V07
+  -I variants/esp32/tbeam_v07

variants/esp32/tlora_v1/platformio.ini

@@ -3,5 +3,7 @@ board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V1 -I variants/tlora_v1
-upload_speed = 115200
+  ${esp32_base.build_flags}
+  -D TLORA_V1
+  -I variants/esp32/tlora_v1
+upload_speed = 115200

variants/esp32/tlora_v1_3/platformio.ini

@@ -3,5 +3,5 @@ board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V1_3 -I variants/tlora_v1_3
-upload_speed = 115200
+  ${esp32_base.build_flags} -D TLORA_V1_3 -I variants/esp32/tlora_v1_3
+upload_speed = 115200

variants/esp32/tlora_v2/platformio.ini

@@ -3,4 +3,6 @@ board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V2 -I variants/tlora_v2
+  ${esp32_base.build_flags}
+  -D TLORA_V2
+  -I variants/esp32/tlora_v2

variants/esp32/tlora_v2_1_16/platformio.ini

@@ -3,6 +3,6 @@ extends = esp32_base
 board = ttgo-lora32-v21
 board_check = true
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/tlora_v2_1_16
+  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
   -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-upload_speed = 115200
+upload_speed = 115200

variants/esp32/tlora_v2_1_16_tcxo/platformio.ini

@@ -5,7 +5,7 @@ board = ttgo-lora32-v21
 build_flags = 
   ${esp32_base.build_flags}
   -D TLORA_V2_1_16
-  -I variants/tlora_v2_1_16
+  -I variants/esp32/tlora_v2_1_16
   -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   -D LORA_TCXO_GPIO=33
 upload_speed = 115200

variants/esp32/tlora_v2_1_18/platformio.ini

@@ -4,4 +4,6 @@ board_level = extra
 board = ttgo-lora32-v21
 
 build_flags = 
-  ${esp32_base.build_flags} -D TLORA_V2_1_18 -I variants/tlora_v2_1_18
+  ${esp32_base.build_flags}
+  -D TLORA_V2_1_18
+  -I variants/esp32/tlora_v2_1_18

variants/esp32/tlora_v3_3_0_tcxo/platformio.ini

@@ -4,7 +4,7 @@ board = ttgo-lora32-v21
 build_flags = 
   ${esp32_base.build_flags}
   -D TLORA_V2_1_16
-  -I variants/tlora_v2_1_16
+  -I variants/esp32/tlora_v2_1_16
   -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   -D LORA_TCXO_GPIO=12
   -D BUTTON_PIN=0

variants/esp32/trackerd/platformio.ini

@@ -4,5 +4,5 @@ board = pico32
 board_build.f_flash = 80000000L
 
 build_flags = 
-  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/trackerd -D BSFILE=\"boards/dragino_lbt2.h\"
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/esp32/trackerd -D BSFILE=\"boards/dragino_lbt2.h\"
 ;board_build.partitions = no_ota.csv

variants/esp32/wiphone/platformio.ini

@@ -5,7 +5,9 @@ board_level = extra
 monitor_filters = esp32_exception_decoder
 board_build.partitions = default_16MB.csv
 build_flags = 
-  ${esp32_base.build_flags} -D WIPHONE -I variants/wiphone
+  ${esp32_base.build_flags}
+  -D WIPHONE
+  -I variants/esp32/wiphone
 lib_deps = 
   ${esp32_base.lib_deps}
   lovyan03/LovyanGFX@^1.2.0

variants/esp32c3/ai-c3/platformio.ini

@@ -2,7 +2,7 @@
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
 board_level = extra
-build_flags = ${esp32c3_base.build_flags}
+build_flags = 
+  ${esp32c3_base.build_flags}
   -D PRIVATE_HW
-  -I variants/ai-c3
-
+  -I variants/esp32c3/ai-c3

variants/esp32c3/diy/esp32c3_super_mini/platformio.ini

@@ -0,0 +1,12 @@
+; ESP32 C3 Super Mini Development Board
+; https://www.espboards.dev/esp32/esp32-c3-super-mini/
+[env:esp32c3_super_mini]
+extends = esp32c3_base
+board = esp32-c3-devkitm-1
+build_flags =
+  ${esp32_base.build_flags}
+  -D PRIVATE_HW
+  -I variants/esp32c3/diy/esp32c3_super_mini
+  -D ARDUINO_USB_MODE=1
+  -D ARDUINO_USB_CDC_ON_BOOT=1
+board_level = extra

variants/esp32c3/hackerboxes_esp32c3_oled/platformio.ini

@@ -7,8 +7,8 @@ build_flags =
   -D PRIVATE_HW
   -D ARDUINO_USB_MODE=1
   -D ARDUINO_USB_CDC_ON_BOOT=1
-  -I variants/hackerboxes_esp32c3_oled
+  -I variants/esp32c3/hackerboxes_esp32c3_oled
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
-upload_speed = 921600
+upload_speed = 921600

variants/esp32c3/heltec_esp32c3/platformio.ini

@@ -1,11 +1,12 @@
 [env:heltec-ht62-esp32c3-sx1262]
 extends = esp32c3_base
 board = esp32-c3-devkitm-1
+board_level = pr
 build_flags = 
   ${esp32_base.build_flags}
   -D HELTEC_HT62
-  -I variants/heltec_esp32c3
+  -I variants/esp32c3/heltec_esp32c3
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyUSB0
-upload_speed = 921600
+upload_speed = 921600

variants/esp32c3/heltec_hru_3601/platformio.ini

@@ -4,6 +4,6 @@ board = adafruit_qtpy_esp32c3
 build_flags =
   ${esp32_base.build_flags}
   -D HELTEC_HRU_3601
-  -I variants/heltec_hru_3601
+  -I variants/esp32c3/heltec_hru_3601
 lib_deps = ${esp32c3_base.lib_deps}
   adafruit/Adafruit NeoPixel @ ^1.12.0

variants/esp32c3/m5stack-stamp-c3/platformio.ini

@@ -5,7 +5,7 @@ board_level = extra
 build_flags = 
   ${esp32_base.build_flags}
   -D PRIVATE_HW
-  -I variants/m5stack-stamp-c3
+  -I variants/esp32c3/m5stack-stamp-c3
 monitor_speed = 115200
 upload_protocol = esptool
 ;upload_port = /dev/ttyACM2

variants/esp32c6/tlora_c6/platformio.ini

@@ -1,9 +1,10 @@
 [env:tlora-c6]
 extends = esp32c6_base
 board = esp32-c6-devkitm-1
+board_level = pr
 build_flags = 
   ${esp32c6_base.build_flags}
   -D TLORA_C6
-  -I variants/tlora_c6
+  -I variants/esp32c6/tlora_c6
   -DARDUINO_USB_CDC_ON_BOOT=1
   -DARDUINO_USB_MODE=1

variants/esp32s2/nugget_s2_lora/platformio.ini

@@ -3,4 +3,6 @@ extends = esp32s2_base
 board = lolin_s2_mini
 board_level = extra
 build_flags = 
-  ${esp32s2_base.build_flags} -D PRIVATE_HW -I variants/nugget_s2_lora
+  ${esp32s2_base.build_flags}
+  -D PRIVATE_HW
+  -I variants/esp32s2/nugget_s2_lora

variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini

@@ -4,5 +4,5 @@ board = CDEBYTE_EoRa-S3
 build_flags =
   ${esp32s3_base.build_flags}
   -D CDEBYTE_EORA_S3
-  -I variants/CDEBYTE_EoRa-S3
-  -D GPS_POWER_TOGGLE
+  -I variants/esp32s3/CDEBYTE_EoRa-S3
+  -D GPS_POWER_TOGGLE

variants/esp32s3/EBYTE_ESP32-S3/platformio.ini

@@ -6,4 +6,4 @@ board_level = extra
 build_flags =
   ${esp32s3_base.build_flags}
   -D EBYTE_ESP32_S3
-  -I variants/EBYTE_ESP32-S3
+  -I variants/esp32s3/EBYTE_ESP32-S3

variants/esp32s3/ELECROW-ThinkNode-M2/platformio.ini

@@ -4,4 +4,4 @@ board = ESP32-S3-WROOM-1-N4
 build_flags =
   ${esp32s3_base.build_flags}
   -D ELECROW_ThinkNode_M2
-  -I variants/ELECROW-ThinkNode-M2
+  -I variants/esp32s3/ELECROW-ThinkNode-M2

variants/esp32s3/ELECROW-ThinkNode-M5/pins_arduino.h

@@ -0,0 +1,28 @@
+// Need this file for ESP32-S3
+// No need to modify this file, changes to pins imported from variant.h
+// Most is similar to https://github.com/espressif/arduino-esp32/blob/master/variants/esp32s3/pins_arduino.h
+
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+#include <variant.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// Serial
+static const uint8_t TX = UART_TX;
+static const uint8_t RX = UART_RX;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = LORA_CS;
+static const uint8_t SCK = LORA_SCK;
+static const uint8_t MOSI = LORA_MOSI;
+static const uint8_t MISO = LORA_MISO;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SCL = I2C_SCL;
+static const uint8_t SDA = I2C_SDA;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini

@@ -0,0 +1,21 @@
+[env:thinknode_m5]
+extends = esp32s3_base
+board = ESP32-S3-WROOM-1-N4
+build_flags =
+  ${esp32s3_base.build_flags}
+  -D ELECROW_ThinkNode_M5
+  -I variants/esp32s3/ELECROW-ThinkNode-M5
+  -DEINK_DISPLAY_MODEL=GxEPD2_154_D67
+  -DEINK_WIDTH=200
+  -DEINK_HEIGHT=200
+  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
+  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted    //20
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=10  ; Minimum interval between BACKGROUND updates          //30
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+;   -DEINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
+
+lib_deps = ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/GxEPD2/archive/1655054ba298e0e29fc2044741940f927f9c2a43.zip
+  lewisxhe/PCF8563_Library@^1.0.1
+  maxpromer/PCA9557-arduino @ ^1.0.0

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -0,0 +1,83 @@
+#ifndef ELECROW_ThinkNode_M5_VAR
+#define ELECROW_ThinkNode_M5_VAR
+
+#define UART_TX 43
+#define UART_RX 44
+
+// LED
+// Both of these are on the GPIO expander
+#define PCA_LED_USER 1  // the Blue LED
+#define PCA_LED_POWER 3 // the Red LED? Seems to have hardware logic to blink when USB is plugged in.
+
+// USB_CHECK
+#define EXT_PWR_DETECT 12
+#define BATTERY_PIN 8
+#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
+
+#define PIN_BUZZER 9
+
+// Buttons
+
+#define PIN_BUTTON2 14
+#define PIN_BUTTON1 21
+
+// Wire Interfaces
+
+#define I2C_SCL 1
+#define I2C_SDA 2
+
+// GPS pins
+#define GPS_SWITH 10
+#define HAS_GPS 1
+#define GPS_L76K
+#define PIN_GPS_REINIT 13 // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
+
+#define PIN_GPS_STANDBY 11 // An output to wake GPS, low means allow sleep, high means force wake
+
+#define GPS_TX_PIN 20 // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN 19 // This is for bits going TOWARDS the GPS
+
+#define GPS_THREAD_INTERVAL 50
+
+#define PIN_SERIAL1_RX GPS_TX_PIN
+#define PIN_SERIAL1_TX GPS_RX_PIN
+
+// PCF8563 RTC Module
+#define PCF8563_RTC 0x51
+
+#define SX126X_CS 17
+#define LORA_SCK 16
+#define LORA_MOSI 15
+#define LORA_MISO 7
+#define SX126X_RESET 6
+#define SX126X_BUSY 5
+#define SX126X_DIO1 4
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.3
+#define SX126X_POWER_EN 46
+#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
+#define USE_SX1262
+#define LORA_CS SX126X_CS // FIXME: for some reason both are used in /src
+#define LORA_DIO1 SX126X_DIO1
+
+#define USE_EINK
+// Note: this is really just backlight power
+#define PCA_PIN_EINK_EN 5 // This is the pin number on the GPIO expander
+#define PIN_EINK_CS 39
+#define PIN_EINK_BUSY 42
+#define PIN_EINK_DC 40
+#define PIN_EINK_RES 41
+#define PIN_EINK_SCLK 38
+#define PIN_EINK_MOSI 45 // also called SDI
+
+// Controls power for all peripherals (eink + GPS + LoRa + Sensor)
+#define PIN_POWER_EN -1
+#define PCA_PIN_POWER_EN 4 // This is the pin number on the GPIO expander
+
+#define PIN_SPI_MISO 7
+#define PIN_SPI_MOSI 15
+#define PIN_SPI_SCK 16
+
+#define BUTTON_PIN PIN_BUTTON1
+#define BUTTON_PIN_ALT PIN_BUTTON2
+#endif