Merge remote-tracking branch 'upstream/master' into StandaloneAddons

2026-01-06 01:48:13 +00:00 · 2025-04-09 18:14:20 -04:00
parent 9f56e613f2 5c13f3451c
commit 6d53ce7956
63 changed files with 805 additions and 252 deletions
--- a/variants/ELECROW-ThinkNode-M1/variant.h
+++ b/variants/ELECROW-ThinkNode-M1/variant.h
@@ -41,16 +41,15 @@ extern "C" {
 #define NUM_ANALOG_INPUTS (1)
 #define NUM_ANALOG_OUTPUTS (0)

-#define PIN_LED1 -1
 #define PIN_LED2 -1
 #define PIN_LED3 -1

 // LED
-#define POWER_LED (32 + 6) // red
+#define PIN_LED1 (32 + 6) // red
 #define LED_POWER (32 + 4)
 #define USER_LED (0 + 13) // green
 // USB_CHECK
-#define USB_CHECK (32 + 3)
+#define EXT_PWR_DETECT (32 + 3)
 #define ADC_V (0 + 8)

 #define LED_RED PIN_LED3
@@ -59,7 +58,7 @@ extern "C" {
 #define LED_BUILTIN LED_BLUE
 #define LED_CONN PIN_GREEN
 #define LED_STATE_ON 0 // State when LED is lit  // LED灯亮时的状态
-#define M1_buzzer (0 + 6)
+#define PIN_BUZZER (0 + 6)
 /*
 * Buttons
 */
@@ -82,6 +81,7 @@ extern "C" {
 static const uint8_t A0 = PIN_A0;

 #define ADC_RESOLUTION 14
+#define BATTERY_SENSE_SAMPLES 30

 #define PIN_NFC1 (9)
 #define PIN_NFC2 (10)
@@ -159,7 +159,7 @@ External serial flash WP25R1635FZUIL0

 #define GPS_THREAD_INTERVAL 50

-#define PIN_GPS_PPS (32 + 1) // GPS开关判断
+#define PIN_GPS_SWITCH (32 + 1) // GPS开关判断

 #define PIN_SERIAL1_RX GPS_TX_PIN
 #define PIN_SERIAL1_TX GPS_RX_PIN
--- a/variants/ELECROW-ThinkNode-M2/variant.h
+++ b/variants/ELECROW-ThinkNode-M2/variant.h
@@ -1,14 +1,13 @@
 // Status
-#define LED_PIN_POWER 1
-#define BIAS_T_ENABLE LED_PIN_POWER
-#define BIAS_T_VALUE HIGH
+#define LED_PIN 1

 #define PIN_BUTTON1 47 // 功能键
 #define PIN_BUTTON2 4  // 电源键

-#define POWER_CFG
-#define POWER_CHRG 6
-#define POWER_FULL 42
+#define LED_POWER 6
+#define ADC_V 42
+// USB_CHECK
+#define EXT_PWR_DETECT 7

 #define PIN_BUZZER 5

--- a/variants/crowpanel-esp32s3-5-epaper/platformio.ini
+++ b/variants/crowpanel-esp32s3-5-epaper/platformio.ini
@@ -11,7 +11,7 @@ board = esp32-s3-devkitc-1
 board_level = extra
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_5_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  ${esp32s3_base.build_flags} -D CROWPANEL_ESP32S3_5_EPAPER -I variants/crowpanel-esp32s3-5-epaper
  -D PRIVATE_HW
  -DBOARD_HAS_PSRAM
  -DGPS_POWER_TOGGLE
@@ -39,7 +39,7 @@ board = esp32-s3-devkitc-1
 board_level = extra
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_4_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  ${esp32s3_base.build_flags} -D CROWPANEL_ESP32S3_4_EPAPER -I variants/crowpanel-esp32s3-5-epaper
  -D PRIVATE_HW
  -DBOARD_HAS_PSRAM
  -DGPS_POWER_TOGGLE
@@ -67,7 +67,7 @@ board = esp32-s3-devkitc-1
 board_level = extra
 upload_protocol = esptool
 build_flags = 
-  ${esp32_base.build_flags} -D CROWPANEL_ESP32S3_2_EPAPER -I variants/crowpanel-esp32s3-5-epaper
+  ${esp32s3_base.build_flags} -D CROWPANEL_ESP32S3_2_EPAPER -I variants/crowpanel-esp32s3-5-epaper
  -D PRIVATE_HW
  -DBOARD_HAS_PSRAM
  -DGPS_POWER_TOGGLE
--- a/variants/diy/v1/variant.h
+++ b/variants/diy/v1/variant.h
@@ -53,4 +53,5 @@
 // Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
 // (which is the default for the sx1262interface code)
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
 #endif
--- a/variants/diy/v1_1/variant.h
+++ b/variants/diy/v1_1/variant.h
@@ -54,4 +54,5 @@
 // Internally the TTGO module hooks the SX126x-DIO2 in to control the TX/RX switch
 // (which is the default for the sx1262interface code)
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#define TCXO_OPTIONAL // make it so that the firmware can try both TCXO and XTAL
 #endif
--- a/variants/t-echo/nicheGraphics.h
+++ b/variants/t-echo/nicheGraphics.h
@@ -112,7 +112,7 @@ void setupNicheGraphics()
    // Setup the capacitive touch button
    // - short: momentary backlight
    // - long: latch backlight on
-    buttons->setWiring(TOUCH_BUTTON, PIN_BUTTON_TOUCH, LOW);
+    buttons->setWiring(TOUCH_BUTTON, PIN_BUTTON_TOUCH);
    buttons->setTiming(TOUCH_BUTTON, 50, 5000); // 5 seconds before latch - limited by T-Echo's capacitive touch IC
    buttons->setHandlerDown(TOUCH_BUTTON, [backlight]() {
        backlight->peek();
--- a/variants/tbeam/platformio.ini
+++ b/variants/tbeam/platformio.ini
@@ -8,4 +8,6 @@ lib_deps =
 build_flags = 
  ${esp32_base.build_flags} -D TBEAM_V10  -I variants/tbeam
  -DGPS_POWER_TOGGLE ; comment this line to disable double press function on the user button to turn off gps entirely.
+  -DBOARD_HAS_PSRAM
+  -mfix-esp32-psram-cache-issue
 upload_speed = 921600
--- a/variants/tlora_t3s3_epaper/nicheGraphics.h
+++ b/variants/tlora_t3s3_epaper/nicheGraphics.h
@@ -0,0 +1,102 @@
+#pragma once
+
+#include "configuration.h"
+
+#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
+
+// InkHUD-specific components
+// ---------------------------
+#include "graphics/niche/InkHUD/InkHUD.h"
+
+// Applets
+#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
+#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
+
+// #include "graphics/niche/InkHUD/Applets/Examples/BasicExample/BasicExampleApplet.h"
+// #include "graphics/niche/InkHUD/Applets/Examples/NewMsgExample/NewMsgExampleApplet.h"
+
+// Shared NicheGraphics components
+// --------------------------------
+#include "graphics/niche/Drivers/EInk/DEPG0213BNS800.h"
+#include "graphics/niche/Inputs/TwoButton.h"
+
+#include "graphics/niche/Fonts/FreeSans6pt7b.h"
+#include "graphics/niche/Fonts/FreeSans6pt8bCyrillic.h"
+#include <Fonts/FreeSans9pt7b.h>
+
+void setupNicheGraphics()
+{
+    using namespace NicheGraphics;
+
+    // SPI
+    // -----------------------------
+
+    // Display is connected to HSPI
+    SPIClass *hspi = new SPIClass(HSPI);
+    hspi->begin(PIN_EINK_SCLK, -1, PIN_EINK_MOSI, PIN_EINK_CS);
+
+    // E-Ink Driver
+    // -----------------------------
+
+    // Use E-Ink driver
+    Drivers::EInk *driver = new Drivers::DEPG0213BNS800;
+    driver->begin(hspi, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
+
+    // InkHUD
+    // ----------------------------
+
+    InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
+
+    // Set the driver
+    inkhud->setDriver(driver);
+
+    // Set how many FAST updates per FULL update
+    // Set how unhealthy additional FAST updates beyond this number are
+    inkhud->setDisplayResilience(15, 1.5);
+
+    // Prepare fonts
+    InkHUD::Applet::fontLarge = InkHUD::AppletFont(FreeSans9pt7b);
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt7b);
+    /*
+    // Font localization demo: Cyrillic
+    InkHUD::Applet::fontSmall = InkHUD::AppletFont(FreeSans6pt8bCyrillic);
+    InkHUD::Applet::fontSmall.addSubstitutionsWin1251();
+    */
+
+    // Customize default settings
+    inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
+    inkhud->persistence->settings.rotation = 3;           // 270 degrees clockwise
+    inkhud->persistence->settings.userTiles.count = 1;    // One tile only by default, keep things simple for new users
+
+    // Pick applets
+    inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
+    inkhud->addApplet("DMs", new InkHUD::DMApplet);                              // Inactive
+    inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0));        // Inactive
+    inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1));        // Inactive
+    inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true);           // Activated
+    inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet);            // Inactive
+    inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0);         // Activated, not autoshown, default on tile 0
+    // inkhud->addApplet("Basic", new InkHUD::BasicExampleApplet);
+    // inkhud->addApplet("NewMsg", new InkHUD::NewMsgExampleApplet);
+
+    // Start running InkHUD
+    inkhud->begin();
+
+    // Buttons
+    // --------------------------
+
+    Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
+
+    // Setup the main user button
+    buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin(), true);
+    buttons->setHandlerShortPress(0, []() { InkHUD::InkHUD::getInstance()->shortpress(); });
+    buttons->setHandlerLongPress(0, []() { InkHUD::InkHUD::getInstance()->longpress(); });
+
+    buttons->start();
+}
+
+#endif
--- a/variants/tlora_t3s3_epaper/platformio.ini
+++ b/variants/tlora_t3s3_epaper/platformio.ini
@@ -7,6 +7,7 @@ upload_protocol = esptool
 build_flags = 
  ${esp32_base.build_flags} -D TLORA_T3S3_EPAPER -I variants/tlora_t3s3_epaper
  -DGPS_POWER_TOGGLE
+  -DUSE_EINK
  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
@@ -16,3 +17,21 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  https://github.com/meshtastic/GxEPD2/archive/b202ebfec6a4821e098cf7a625ba0f6f2400292d.zip
+
+[env:tlora-t3s3-epaper-inkhud]
+extends = esp32s3_base, inkhud
+board = tlora-t3s3-v1
+board_check = true
+upload_protocol = esptool
+build_src_filter =
+  ${esp32_base.build_src_filter}
+  ${inkhud.build_src_filter}
+build_flags =
+  ${esp32s3_base.build_flags}
+  ${inkhud.build_flags}
+  -I variants/tlora_t3s3_epaper
+  -D TLORA_T3S3_EPAPER
+  -D MAX_THREADS=40 ; Required if used with WiFi
+lib_deps =
+  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
+  ${esp32s3_base.lib_deps}
--- a/variants/tlora_t3s3_epaper/variant.h
+++ b/variants/tlora_t3s3_epaper/variant.h
@@ -2,7 +2,6 @@
 #define SDCARD_USE_SPI1

 // Display (E-Ink)
-#define USE_EINK
 #define PIN_EINK_CS 15
 #define PIN_EINK_BUSY 48
 #define PIN_EINK_DC 16