rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-21 10:12:50 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add support for muzi-base (#8753)

Browse Source
This commit is contained in:
Jonathan Bennett
2025-11-25 18:28:06 -06:00
committed by GitHub
parent 79e8fc94bc
commit 654abe5b2c
15 changed files with 440 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

56
boards/muzi-base.json Normal file
View File

@@ -0,0 +1,56 @@
{
"build": {
"arduino": {
"ldscript": "nrf52840_s140_v6.ld"
},
"core": "nRF5",
"cpu": "cortex-m4",
"extra_flags": "-DARDUINO_NRF52840_MUZI_BASE -DNRF52840_XXAA",
"f_cpu": "64000000L",
"hwids": [["0x239A", "0xcafe"]],
"mcu": "nrf52840",
"variant": "muzi-base",
"variants_dir": "variants",
"bsp": {
"name": "adafruit"
},
"softdevice": {
"sd_flags": "-DS140",
"sd_name": "s140",
"sd_version": "6.1.1",
"sd_fwid": "0x00B6"
},
"bootloader": {
"settings_addr": "0xFF000"
}
},
"connectivity": ["bluetooth"],
"debug": {
"jlink_device": "nRF52840_xxAA",
"onboard_tools": ["jlink"],
"svd_path": "nrf52840.svd",
"openocd_target": "nrf52840-mdk-rs"
},
"frameworks": ["arduino"],
"name": "Muzi Base",
"url": "https://muzi.works/",
"vendor": "MuziWorks",
"upload": {
"maximum_ram_size": 248832,
"maximum_size": 815104,
"speed": 115200,
"protocol": "nrfutil",
"protocols": [
"jlink",
"nrfjprog",
"nrfutil",
"blackmagic",
"cmsis-dap",
"mbed",
"stlink"
],
"use_1200bps_touch": true,
"require_upload_port": true,
"wait_for_upload_port": true
}
}

20
src/Power.cpp
View File

@@ -278,6 +278,11 @@ class AnalogBatteryLevel : public HasBatteryLevel
break;
}
}
#if defined(BATTERY_CHARGING_INV)
// bit of trickery to show 99% up until the charge finishes
if (!digitalRead(BATTERY_CHARGING_INV) && battery_SOC > 99)
battery_SOC = 99;
#endif
return clamp((int)(battery_SOC), 0, 100);
}
@@ -455,6 +460,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
}
// if it's not HIGH - check the battery
#endif
#elif defined(MUZI_BASE)
return NRF_POWER->USBREGSTATUS & POWER_USBREGSTATUS_VBUSDETECT_Msk;
#endif
return getBattVoltage() > chargingVolt;
}
@@ -470,6 +477,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
#endif
#ifdef EXT_CHRG_DETECT
return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value;
#elif defined(BATTERY_CHARGING_INV)
return !digitalRead(BATTERY_CHARGING_INV);
#else
#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(DISABLE_INA_CHARGING_DETECTION)
if (hasINA()) {
@@ -702,7 +711,16 @@ bool Power::setup()
},
CHANGE);
#endif
#ifdef BATTERY_CHARGING_INV
attachInterrupt(
BATTERY_CHARGING_INV,
[]() {
power->setIntervalFromNow(0);
runASAP = true;
BaseType_t higherWake = 0;
},
CHANGE);
#endif
enabled = found;
low_voltage_counter = 0;

5
src/detect/ScanI2CTwoWire.cpp
View File

@@ -547,6 +547,11 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize)
case ICM20948_ADDR: // same as BMX160_ADDR
case ICM20948_ADDR_ALT: // same as MPU6050_ADDR
registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1);
#ifdef HAS_ICM20948
type = ICM20948;
logFoundDevice("ICM20948", (uint8_t)addr.address);
break;
#endif
if (registerValue == 0xEA) {
type = ICM20948;
logFoundDevice("ICM20948", (uint8_t)addr.address);

8
src/gps/RTC.cpp
View File

@@ -112,7 +112,11 @@ RTCSetResult readFromRTC()
#elif defined(RX8130CE_RTC)
if (rtc_found.address == RX8130CE_RTC) {
uint32_t now = millis();
#ifdef MUZI_BASE
ArtronShop_RX8130CE rtc(&Wire1);
#else
ArtronShop_RX8130CE rtc(&Wire);
#endif
tm t;
if (rtc.getTime(&t)) {
tv.tv_sec = gm_mktime(&t);
@@ -245,7 +249,11 @@ RTCSetResult perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpd
}
#elif defined(RX8130CE_RTC)
if (rtc_found.address == RX8130CE_RTC) {
#ifdef MUZI_BASE
ArtronShop_RX8130CE rtc(&Wire1);
#else
ArtronShop_RX8130CE rtc(&Wire);
#endif
tm *t = gmtime(&tv->tv_sec);
if (rtc.setTime(*t)) {
LOG_DEBUG("RX8130CE setDateTime %02d-%02d-%02d %02d:%02d:%02d (%ld)", t->tm_year + 1900, t->tm_mon + 1,

17
src/graphics/Screen.cpp
View File

@@ -435,6 +435,14 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
PMU->enablePowerOutput(XPOWERS_ALDO2);
#endif
#if defined(MUZI_BASE)
dispdev->init();
dispdev->setBrightness(brightness);
dispdev->flipScreenVertically();
dispdev->resetDisplay();
digitalWrite(SCREEN_12V_ENABLE, HIGH);
delay(100);
#endif
#if !ARCH_PORTDUINO
dispdev->displayOn();
#endif
@@ -484,6 +492,10 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
#endif
dispdev->displayOff();
#ifdef SCREEN_12V_ENABLE
digitalWrite(SCREEN_12V_ENABLE, LOW);
#endif
#ifdef USE_ST7789
SPI1.end();
#if defined(ARCH_ESP32)
@@ -534,7 +546,7 @@ void Screen::setup()
static_cast<AutoOLEDWire *>(dispdev)->setDetected(model);
#endif
#ifdef USE_SH1107_128_64
#if defined(USE_SH1107_128_64) || defined(USE_SH1107)
static_cast<SH1106Wire *>(dispdev)->setSubtype(7);
#endif
@@ -542,6 +554,9 @@ void Screen::setup()
// Apply custom RGB color (e.g. Heltec T114/T190)
static_cast<ST7789Spi *>(dispdev)->setRGB(TFT_MESH);
#endif
#if defined(MUZI_BASE)
dispdev->delayPoweron = true;
#endif
// === Initialize display and UI system ===
ui->init();

2
src/graphics/Screen.h
View File

@@ -249,6 +249,8 @@ class Screen : public concurrency::OSThread
bool isOverlayBannerShowing();
bool isScreenOn() { return screenOn; }
// Stores the last 4 of our hardware ID, to make finding the device for pairing easier
// FIXME: Needs refactoring and getMacAddr needs to be moved to a utility class
char ourId[5];

3
src/mesh/NodeDB.cpp
View File

@@ -734,6 +734,9 @@ void NodeDB::installDefaultConfig(bool preserveKey = false)
config.display.screen_on_secs = 30;
config.display.wake_on_tap_or_motion = true;
#endif
#ifdef COMPASS_ORIENTATION
config.display.compass_orientation = COMPASS_ORIENTATION;
#endif
#if defined(ARCH_ESP32) && !MESHTASTIC_EXCLUDE_WIFI
if (WiFiOTA::isUpdated()) {
WiFiOTA::recoverConfig(&config.network);

9
src/modules/SerialModule.cpp
View File

@@ -64,7 +64,8 @@ SerialModule *serialModule;
SerialModuleRadio *serialModuleRadio;
#if defined(TTGO_T_ECHO) || defined(CANARYONE) || defined(MESHLINK) || defined(ELECROW_ThinkNode_M1) || \
defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3)
defined(ELECROW_ThinkNode_M5) || defined(HELTEC_MESH_SOLAR) || defined(T_ECHO_LITE) || defined(ELECROW_ThinkNode_M3) || \
defined(MUZI_BASE)
SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial")
{
api_type = TYPE_SERIAL;
@@ -204,7 +205,7 @@ int32_t SerialModule::runOnce()
Serial.setTimeout(moduleConfig.serial.timeout > 0 ? moduleConfig.serial.timeout : TIMEOUT);
}
#elif !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) && \
!defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5)
!defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
if (moduleConfig.serial.rxd && moduleConfig.serial.txd) {
#ifdef ARCH_RP2040
Serial2.setFIFOSize(RX_BUFFER);
@@ -261,7 +262,7 @@ int32_t SerialModule::runOnce()
}
#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(MESHLINK) && \
!defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5)
!defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && !defined(MUZI_BASE)
else if ((moduleConfig.serial.mode == meshtastic_ModuleConfig_SerialConfig_Serial_Mode_WS85)) {
processWXSerial();
@@ -537,7 +538,7 @@ void SerialModule::processWXSerial()
{
#if !defined(TTGO_T_ECHO) && !defined(T_ECHO_LITE) && !defined(CANARYONE) && !defined(CONFIG_IDF_TARGET_ESP32C6) && \
!defined(MESHLINK) && !defined(ELECROW_ThinkNode_M1) && !defined(ELECROW_ThinkNode_M3) && !defined(ELECROW_ThinkNode_M5) && \
!defined(ARCH_STM32WL)
!defined(ARCH_STM32WL) && !defined(MUZI_BASE)
static unsigned int lastAveraged = 0;
static unsigned int averageIntervalMillis = 300000; // 5 minutes hard coded.
static double dir_sum_sin = 0;

17
src/motion/ICM20948Sensor.cpp
View File

@@ -47,6 +47,21 @@ int32_t ICM20948Sensor::runOnce()
int32_t ICM20948Sensor::runOnce()
{
#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
#if defined(MUZI_BASE) // temporarily gated to single device due to feature freeze
if (screen && !screen->isScreenOn() && !config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
if (!isAsleep) {
LOG_DEBUG("sleeping IMU");
sensor->sleep(true);
isAsleep = true;
}
return MOTION_SENSOR_CHECK_INTERVAL_MS;
}
if (isAsleep) {
sensor->sleep(false);
isAsleep = false;
}
#endif
float magX = 0, magY = 0, magZ = 0;
if (sensor->dataReady()) {
sensor->getAGMT();
@@ -156,6 +171,8 @@ int32_t ICM20948Sensor::runOnce()
void ICM20948Sensor::calibrate(uint16_t forSeconds)
{
#if !defined(MESHTASTIC_EXCLUDE_SCREEN) && HAS_SCREEN
LOG_DEBUG("Old calibration data: highestX = %f, lowestX = %f, highestY = %f, lowestY = %f, highestZ = %f, lowestZ = %f",
highestX, lowestX, highestY, lowestY, highestZ, lowestZ);
LOG_DEBUG("BMX160 calibration started for %is", forSeconds);
if (sensor->dataReady()) {
sensor->getAGMT();

6
src/motion/ICM20948Sensor.h
View File

@@ -82,7 +82,13 @@ class ICM20948Sensor : public MotionSensor
private:
ICM20948Singleton *sensor = nullptr;
bool showingScreen = false;
#ifdef MUZI_BASE
bool isAsleep = false;
float highestX = 449.000000, lowestX = -140.000000, highestY = 422.000000, lowestY = -232.000000, highestZ = 749.000000,
lowestZ = 98.000000;
#else
float highestX = 0, lowestX = 0, highestY = 0, lowestY = 0, highestZ = 0, lowestZ = 0;
#endif
public:
explicit ICM20948Sensor(ScanI2C::FoundDevice foundDevice);

2
src/platform/nrf52/architecture.h
View File

@@ -108,6 +108,8 @@
#define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
#elif defined(HELTEC_MESH_SOLAR)
#define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_SOLAR
#elif defined(MUZI_BASE)
#define HW_VENDOR meshtastic_HardwareModel_RESERVED_FRIED_CHICKEN
#else
#define HW_VENDOR meshtastic_HardwareModel_NRF52_UNKNOWN
#endif

15
variants/nrf52840/muzi_base/platformio.ini Normal file
View File

@@ -0,0 +1,15 @@
[env:muzi-base]
extends = nrf52840_base
board = muzi-base
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/muzi_base
-D MUZI_BASE
-D CONFIG_NFCT_PINS_AS_GPIOS=1
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52840_base.build_src_filter} +<../variants/nrf52840/muzi_base>
lib_deps =
${nrf52840_base.lib_deps}
artronshop/ArtronShop_RX8130CE@1.0.0

11
variants/nrf52840/muzi_base/rfswitch.h Normal file
View File

@@ -0,0 +1,11 @@
#include "RadioLib.h"
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

83
variants/nrf52840/muzi_base/variant.cpp Normal file
View File

@@ -0,0 +1,83 @@
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0,
1,
2,
3,
4,
5,
6,
7,
8,
9,
10,
11,
12,
13,
14,
15,
16,
17,
18,
19,
20,
21,
22,
23,
24,
25,
26,
27,
28,
29,
30,
31,
// P1
32,
33,
34,
35,
36,
37,
38,
39,
40,
41,
42,
43,
44,
45,
46,
47,
};
void initVariant()
{
// Initialize the digital pins as inputs or outputs
pinMode(PIN_LED1, OUTPUT);
digitalWrite(PIN_LED1, HIGH);
pinMode(PIN_LED2, OUTPUT);
digitalWrite(PIN_LED2, HIGH);
// Initialize LoRa pins
pinMode(SX126X_RESET, OUTPUT);
digitalWrite(SX126X_RESET, HIGH);
pinMode(SX126X_CS, OUTPUT);
digitalWrite(SX126X_CS, HIGH);
pinMode(GPS_EN_GPIO, OUTPUT);
digitalWrite(GPS_EN_GPIO, HIGH); // GPS on initially
pinMode(SCREEN_12V_ENABLE, OUTPUT);
digitalWrite(SCREEN_12V_ENABLE, LOW); //
pinMode(BATTERY_CHARGING_INV, INPUT);
}

192
variants/nrf52840/muzi_base/variant.h Normal file
View File

@@ -0,0 +1,192 @@
#pragma once
#ifndef _VARIANT_MUZI_BASE_
#define _VARIANT_MUZI_BASE_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (6)
#define NUM_ANALOG_OUTPUTS (0)
// Define I2C Peripherals
#define WIRE_INTERFACES_COUNT 2
// this is the OLED bus
#define PIN_WIRE_SDA (0 + 24) // P0.24
#define PIN_WIRE_SCL (0 + 25) // P0.25
// IMU bus
#define PIN_WIRE1_SDA (0 + 04) // P0.04
#define PIN_WIRE1_SCL (0 + 06) // P0.06
#define COMPASS_ORIENTATION meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270
#define HAS_ICM20948 // forces the i2c address to be seen as this sensor
#define HAS_RTC 1
#define RX8130CE_RTC 0x32
// LEDs
#define PIN_LED1 (32 + 3) // P1.03, Green
#define PIN_LED2 (32 + 4) // P1.04, Blue
#define LED_BUILTIN -1 // PIN_LED1
#define LED_BLUE PIN_LED2
#define LED_STATE_ON 0 // State when LED is lit
// Buttons
#define HAS_TRACKBALL 1
#define TB_UP (0 + 21)
#define TB_DOWN (0 + 17)
#define TB_LEFT (32 + 05)
#define TB_RIGHT (0 + 16)
#define TB_PRESS (0 + 10)
#define TB_DIRECTION FALLING
#define CANCEL_BUTTON_PIN (0 + 15) // P0.15
#define CANCEL_BUTTON_ACTIVE_LOW true
#define CANCEL_BUTTON_ACTIVE_PULLUP false
// Switch
#define SWITCH_MODE1 (32 + 9) // P1.09, Top Position
#define SWITCH_MODE2 (0 + 12) // P0.12, Middle Position
#define PIN_GPS_SWITCH SWITCH_MODE2
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
// For LORA, spi 0
#define PIN_SPI_MISO (32 + 15) // P1.15
#define PIN_SPI_MOSI (32 + 14) // P1.14
#define PIN_SPI_SCK (32 + 13) // P1.13
#define LORA_SCK PIN_SPI_SCK
#define LORA_MISO PIN_SPI_MISO
#define LORA_MOSI PIN_SPI_MOSI
#define LORA_CS (32 + 12) // P1.12
#define USE_SX1262
#define SX126X_CS LORA_CS
#define SX126X_DIO1 (32 + 6) // P1.06
#define SX126X_BUSY (32 + 11) // P1.11
#define SX126X_RESET (32 + 10) // P1.10
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 3.3
#define USE_LR1121
#define LR1121_IRQ_PIN (32 + 8) // P1.08
#define LR1121_NRESET_PIN (32 + 10) // P1.10
#define LR1121_BUSY_PIN (32 + 11) // P1.11
#define LR1121_SPI_NSS_PIN LORA_CS
#define LR1121_SPI_SCK_PIN LORA_SCK
#define LR1121_SPI_MOSI_PIN LORA_MOSI
#define LR1121_SPI_MISO_PIN LORA_MISO
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
#define LR11X0_DIO_AS_RF_SWITCH
// GPS
#define GPS_RX_PIN (0 + 19) // P0.19
#define GPS_TX_PIN (0 + 20) // P0.20
#define GPS_EN_GPIO (32 + 1) // P1.01
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_BUZZER (0 + 22) // P0.22
// Battery monitoring
#define BATTERY_PIN (0 + 31) // P0.31
// #define CHARGER_FAULT (0 + 27) // P0.27
#define BATTERY_CHARGING_INV (32 + 02) // P1.02
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#define ADC_MULTIPLIER 1.537
#define OCV_ARRAY 4050, 4010, 3990, 3930, 3870, 3820, 3740, 3630, 3550, 3450, 3100
// Display - I2C display
#define HAS_SCREEN 1
#define SCREEN_12V_ENABLE (0 + 23) // P0.23
#define USE_SH1107
#define USERPREFS_OEM_TEXT "muzi_works_logo"
#define USERPREFS_OEM_FONT_SIZE 0
#define USERPREFS_OEM_IMAGE_WIDTH 88 // 11 bytes wide
#define USERPREFS_OEM_IMAGE_HEIGHT 47 // 517 bytes total
#define USERPREFS_OEM_IMAGE_DATA \
{ \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, \
0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0xF7, 0x0F, 0xFF, 0x00, 0xF0, 0xFF, 0x0F, 0xC0, 0xFF, 0x07, 0x78, 0xFF, 0x9F, 0xFF, 0x01, 0xF0, 0xFF, 0x0F, 0xC0, \
0xFF, 0x03, 0x78, 0x3F, 0xFE, 0xF3, 0x01, 0xF0, 0xFF, 0x0F, 0x00, 0xE0, 0x03, 0x78, 0x1F, 0xFC, 0xC0, 0x03, 0xF0, \
0xFF, 0x0F, 0x00, 0xE0, 0x01, 0x78, 0x0F, 0xF8, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0xF0, 0x00, 0x78, 0x0F, 0x78, \
0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x70, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x78, 0x00, \
0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x3C, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, \
0x00, 0x1C, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x1E, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, \
0xE0, 0xFF, 0x0F, 0x00, 0x0F, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xE0, 0xFF, 0x07, 0x80, 0x07, 0x00, 0x78, 0x07, \
0x70, 0x80, 0x03, 0xC0, 0xFF, 0x07, 0x80, 0x07, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xC0, 0xFF, 0x03, 0xC0, 0xFF, \
0x07, 0x78, 0x07, 0x70, 0x80, 0x03, 0x00, 0xFF, 0x01, 0xE0, 0xFF, 0x07, 0x78, 0x07, 0x70, 0x80, 0x03, 0x00, 0x7C, \
0x00, 0xF0, 0xFF, 0x07, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xE3, 0xE7, 0xC7, 0x1F, 0xF8, 0x0F, 0xF0, 0xE7, 0xE3, 0x07, 0x7C, 0xC7, 0xE7, \
0xC3, 0x0F, 0xE0, 0x07, 0xE0, 0xC7, 0xE1, 0x03, 0x70, 0xC7, 0xC3, 0xE3, 0x87, 0xC1, 0x07, 0xC0, 0xC7, 0xF8, 0xE3, \
0x71, 0xC7, 0xC3, 0xE3, 0xE3, 0xC7, 0xC7, 0xC7, 0x47, 0xF8, 0xF3, 0x7F, 0x8F, 0xC3, 0xF1, 0xE3, 0x8F, 0xC7, 0x8F, \
0x27, 0xFC, 0xE3, 0x7F, 0x8F, 0x81, 0xF1, 0xF1, 0x8F, 0xC7, 0xCF, 0x07, 0xFE, 0x03, 0x7E, 0x8F, 0x99, 0xF1, 0xF1, \
0x8F, 0x07, 0xC0, 0x07, 0xFF, 0x07, 0x78, 0x9F, 0x99, 0xF9, 0xF1, 0x8F, 0x07, 0xE0, 0x07, 0xFE, 0x3F, 0x70, 0x1F, \
0x18, 0xF8, 0xF3, 0x8F, 0x07, 0xF0, 0x27, 0xFC, 0xFF, 0x71, 0x3F, 0x18, 0xF8, 0xE3, 0xC7, 0xC7, 0xF1, 0x47, 0xF8, \
0xF3, 0x63, 0x3F, 0x3C, 0xFC, 0xC3, 0xC3, 0xC7, 0xE3, 0xC7, 0xF0, 0xE1, 0x71, 0x3F, 0x3C, 0xFC, 0x07, 0xE0, 0xC7, \
0xC7, 0xC7, 0xE1, 0x03, 0x70, 0x7F, 0x7E, 0xFE, 0x0F, 0xF0, 0xC7, 0x87, 0xC7, 0xC3, 0x07, 0x78, 0xFF, 0xFF, 0xFF, \
0x7F, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x7E, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, \
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
0xFF, 0xFF, 0x7F \
}
// QSPI Pins
#define PIN_QSPI_SCK (0 + 3)
#define PIN_QSPI_CS (0 + 26)
#define PIN_QSPI_IO0 (0 + 30)
#define PIN_QSPI_IO1 (0 + 29)
#define PIN_QSPI_IO2 (0 + 28)
#define PIN_QSPI_IO3 (0 + 2)
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES W25Q32JVSS
#define EXTERNAL_FLASH_USE_QSPI
// NFC is disabled via CONFIG_NFCT_PINS_AS_GPIOS=1 build flag
// This configures P0.09 and P0.10 as regular GPIO pins instead of NFC pins
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#ifdef __cplusplus
#endif
#endif // _VARIANT_MUZI_BASE_