mirror of
https://github.com/meshtastic/firmware.git
synced 2026-01-09 19:37:34 +00:00
Add support for muzi-base (#8753)
This commit is contained in:
Jonathan Bennett
GitHub
15
variants/nrf52840/muzi_base/platformio.ini
Normal file
15
variants/nrf52840/muzi_base/platformio.ini
Normal file
@@ -0,0 +1,15 @@
|
||||
[env:muzi-base]
|
||||
extends = nrf52840_base
|
||||
board = muzi-base
|
||||
build_flags = ${nrf52840_base.build_flags}
|
||||
-I variants/nrf52840/muzi_base
|
||||
-D MUZI_BASE
|
||||
-D CONFIG_NFCT_PINS_AS_GPIOS=1
|
||||
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
|
||||
|
||||
build_src_filter = ${nrf52840_base.build_src_filter} +<../variants/nrf52840/muzi_base>
|
||||
lib_deps =
|
||||
${nrf52840_base.lib_deps}
|
||||
artronshop/ArtronShop_RX8130CE@1.0.0
|
||||
|
||||
|
||||
11
variants/nrf52840/muzi_base/rfswitch.h
Normal file
11
variants/nrf52840/muzi_base/rfswitch.h
Normal file
@@ -0,0 +1,11 @@
|
||||
#include "RadioLib.h"
|
||||
|
||||
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
|
||||
|
||||
static const Module::RfSwitchMode_t rfswitch_table[] = {
|
||||
// mode DIO5 DIO6
|
||||
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
|
||||
{LR11x0::MODE_TX, {LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
|
||||
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
|
||||
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
|
||||
};
|
||||
83
variants/nrf52840/muzi_base/variant.cpp
Normal file
83
variants/nrf52840/muzi_base/variant.cpp
Normal file
@@ -0,0 +1,83 @@
|
||||
#include "variant.h"
|
||||
#include "nrf.h"
|
||||
#include "wiring_constants.h"
|
||||
#include "wiring_digital.h"
|
||||
|
||||
const uint32_t g_ADigitalPinMap[] = {
|
||||
// P0
|
||||
0,
|
||||
1,
|
||||
2,
|
||||
3,
|
||||
4,
|
||||
5,
|
||||
6,
|
||||
7,
|
||||
8,
|
||||
9,
|
||||
10,
|
||||
11,
|
||||
12,
|
||||
13,
|
||||
14,
|
||||
15,
|
||||
16,
|
||||
17,
|
||||
18,
|
||||
19,
|
||||
20,
|
||||
21,
|
||||
22,
|
||||
23,
|
||||
24,
|
||||
25,
|
||||
26,
|
||||
27,
|
||||
28,
|
||||
29,
|
||||
30,
|
||||
31,
|
||||
|
||||
// P1
|
||||
32,
|
||||
33,
|
||||
34,
|
||||
35,
|
||||
36,
|
||||
37,
|
||||
38,
|
||||
39,
|
||||
40,
|
||||
41,
|
||||
42,
|
||||
43,
|
||||
44,
|
||||
45,
|
||||
46,
|
||||
47,
|
||||
};
|
||||
|
||||
void initVariant()
|
||||
{
|
||||
// Initialize the digital pins as inputs or outputs
|
||||
pinMode(PIN_LED1, OUTPUT);
|
||||
digitalWrite(PIN_LED1, HIGH);
|
||||
|
||||
pinMode(PIN_LED2, OUTPUT);
|
||||
digitalWrite(PIN_LED2, HIGH);
|
||||
|
||||
// Initialize LoRa pins
|
||||
pinMode(SX126X_RESET, OUTPUT);
|
||||
digitalWrite(SX126X_RESET, HIGH);
|
||||
|
||||
pinMode(SX126X_CS, OUTPUT);
|
||||
digitalWrite(SX126X_CS, HIGH);
|
||||
|
||||
pinMode(GPS_EN_GPIO, OUTPUT);
|
||||
digitalWrite(GPS_EN_GPIO, HIGH); // GPS on initially
|
||||
|
||||
pinMode(SCREEN_12V_ENABLE, OUTPUT);
|
||||
digitalWrite(SCREEN_12V_ENABLE, LOW); //
|
||||
|
||||
pinMode(BATTERY_CHARGING_INV, INPUT);
|
||||
}
|
||||
192
variants/nrf52840/muzi_base/variant.h
Normal file
192
variants/nrf52840/muzi_base/variant.h
Normal file
@@ -0,0 +1,192 @@
|
||||
#pragma once
|
||||
|
||||
#ifndef _VARIANT_MUZI_BASE_
|
||||
#define _VARIANT_MUZI_BASE_
|
||||
|
||||
/** Master clock frequency */
|
||||
#define VARIANT_MCK (64000000ul)
|
||||
|
||||
#define USE_LFXO // Board uses 32khz crystal for LF
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#include "WVariant.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
// Number of pins defined in PinDescription array
|
||||
#define PINS_COUNT (48)
|
||||
#define NUM_DIGITAL_PINS (48)
|
||||
#define NUM_ANALOG_INPUTS (6)
|
||||
#define NUM_ANALOG_OUTPUTS (0)
|
||||
|
||||
// Define I2C Peripherals
|
||||
#define WIRE_INTERFACES_COUNT 2
|
||||
|
||||
// this is the OLED bus
|
||||
#define PIN_WIRE_SDA (0 + 24) // P0.24
|
||||
#define PIN_WIRE_SCL (0 + 25) // P0.25
|
||||
|
||||
// IMU bus
|
||||
#define PIN_WIRE1_SDA (0 + 04) // P0.04
|
||||
#define PIN_WIRE1_SCL (0 + 06) // P0.06
|
||||
|
||||
#define COMPASS_ORIENTATION meshtastic_Config_DisplayConfig_CompassOrientation_DEGREES_270
|
||||
#define HAS_ICM20948 // forces the i2c address to be seen as this sensor
|
||||
|
||||
#define HAS_RTC 1
|
||||
#define RX8130CE_RTC 0x32
|
||||
|
||||
// LEDs
|
||||
#define PIN_LED1 (32 + 3) // P1.03, Green
|
||||
#define PIN_LED2 (32 + 4) // P1.04, Blue
|
||||
|
||||
#define LED_BUILTIN -1 // PIN_LED1
|
||||
#define LED_BLUE PIN_LED2
|
||||
#define LED_STATE_ON 0 // State when LED is lit
|
||||
|
||||
// Buttons
|
||||
#define HAS_TRACKBALL 1
|
||||
#define TB_UP (0 + 21)
|
||||
#define TB_DOWN (0 + 17)
|
||||
#define TB_LEFT (32 + 05)
|
||||
#define TB_RIGHT (0 + 16)
|
||||
#define TB_PRESS (0 + 10)
|
||||
#define TB_DIRECTION FALLING
|
||||
|
||||
#define CANCEL_BUTTON_PIN (0 + 15) // P0.15
|
||||
#define CANCEL_BUTTON_ACTIVE_LOW true
|
||||
#define CANCEL_BUTTON_ACTIVE_PULLUP false
|
||||
|
||||
// Switch
|
||||
#define SWITCH_MODE1 (32 + 9) // P1.09, Top Position
|
||||
#define SWITCH_MODE2 (0 + 12) // P0.12, Middle Position
|
||||
#define PIN_GPS_SWITCH SWITCH_MODE2
|
||||
|
||||
/*
|
||||
* SPI Interfaces
|
||||
*/
|
||||
|
||||
#define SPI_INTERFACES_COUNT 1
|
||||
|
||||
// For LORA, spi 0
|
||||
#define PIN_SPI_MISO (32 + 15) // P1.15
|
||||
#define PIN_SPI_MOSI (32 + 14) // P1.14
|
||||
#define PIN_SPI_SCK (32 + 13) // P1.13
|
||||
|
||||
#define LORA_SCK PIN_SPI_SCK
|
||||
#define LORA_MISO PIN_SPI_MISO
|
||||
#define LORA_MOSI PIN_SPI_MOSI
|
||||
#define LORA_CS (32 + 12) // P1.12
|
||||
|
||||
#define USE_SX1262
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 (32 + 6) // P1.06
|
||||
#define SX126X_BUSY (32 + 11) // P1.11
|
||||
#define SX126X_RESET (32 + 10) // P1.10
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 3.3
|
||||
|
||||
#define USE_LR1121
|
||||
#define LR1121_IRQ_PIN (32 + 8) // P1.08
|
||||
#define LR1121_NRESET_PIN (32 + 10) // P1.10
|
||||
#define LR1121_BUSY_PIN (32 + 11) // P1.11
|
||||
#define LR1121_SPI_NSS_PIN LORA_CS
|
||||
#define LR1121_SPI_SCK_PIN LORA_SCK
|
||||
#define LR1121_SPI_MOSI_PIN LORA_MOSI
|
||||
#define LR1121_SPI_MISO_PIN LORA_MISO
|
||||
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
|
||||
#define LR11X0_DIO_AS_RF_SWITCH
|
||||
|
||||
// GPS
|
||||
#define GPS_RX_PIN (0 + 19) // P0.19
|
||||
#define GPS_TX_PIN (0 + 20) // P0.20
|
||||
#define GPS_EN_GPIO (32 + 1) // P1.01
|
||||
|
||||
#define PIN_SERIAL1_RX GPS_TX_PIN
|
||||
#define PIN_SERIAL1_TX GPS_RX_PIN
|
||||
|
||||
#define PIN_BUZZER (0 + 22) // P0.22
|
||||
|
||||
// Battery monitoring
|
||||
#define BATTERY_PIN (0 + 31) // P0.31
|
||||
|
||||
// #define CHARGER_FAULT (0 + 27) // P0.27
|
||||
#define BATTERY_CHARGING_INV (32 + 02) // P1.02
|
||||
#define BATTERY_SENSE_RESOLUTION_BITS 12
|
||||
#define BATTERY_SENSE_RESOLUTION 4096.0
|
||||
#define ADC_MULTIPLIER 1.537
|
||||
|
||||
#define OCV_ARRAY 4050, 4010, 3990, 3930, 3870, 3820, 3740, 3630, 3550, 3450, 3100
|
||||
|
||||
// Display - I2C display
|
||||
#define HAS_SCREEN 1
|
||||
#define SCREEN_12V_ENABLE (0 + 23) // P0.23
|
||||
#define USE_SH1107
|
||||
|
||||
#define USERPREFS_OEM_TEXT "muzi_works_logo"
|
||||
#define USERPREFS_OEM_FONT_SIZE 0
|
||||
#define USERPREFS_OEM_IMAGE_WIDTH 88 // 11 bytes wide
|
||||
#define USERPREFS_OEM_IMAGE_HEIGHT 47 // 517 bytes total
|
||||
#define USERPREFS_OEM_IMAGE_DATA \
|
||||
{ \
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, \
|
||||
0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0xFF, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
|
||||
0xF7, 0x0F, 0xFF, 0x00, 0xF0, 0xFF, 0x0F, 0xC0, 0xFF, 0x07, 0x78, 0xFF, 0x9F, 0xFF, 0x01, 0xF0, 0xFF, 0x0F, 0xC0, \
|
||||
0xFF, 0x03, 0x78, 0x3F, 0xFE, 0xF3, 0x01, 0xF0, 0xFF, 0x0F, 0x00, 0xE0, 0x03, 0x78, 0x1F, 0xFC, 0xC0, 0x03, 0xF0, \
|
||||
0xFF, 0x0F, 0x00, 0xE0, 0x01, 0x78, 0x0F, 0xF8, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0xF0, 0x00, 0x78, 0x0F, 0x78, \
|
||||
0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x70, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x78, 0x00, \
|
||||
0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x3C, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, \
|
||||
0x00, 0x1C, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xF0, 0xFF, 0x0F, 0x00, 0x1E, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, \
|
||||
0xE0, 0xFF, 0x0F, 0x00, 0x0F, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xE0, 0xFF, 0x07, 0x80, 0x07, 0x00, 0x78, 0x07, \
|
||||
0x70, 0x80, 0x03, 0xC0, 0xFF, 0x07, 0x80, 0x07, 0x00, 0x78, 0x07, 0x70, 0x80, 0x03, 0xC0, 0xFF, 0x03, 0xC0, 0xFF, \
|
||||
0x07, 0x78, 0x07, 0x70, 0x80, 0x03, 0x00, 0xFF, 0x01, 0xE0, 0xFF, 0x07, 0x78, 0x07, 0x70, 0x80, 0x03, 0x00, 0x7C, \
|
||||
0x00, 0xF0, 0xFF, 0x07, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, \
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
|
||||
0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xE3, 0xE7, 0xC7, 0x1F, 0xF8, 0x0F, 0xF0, 0xE7, 0xE3, 0x07, 0x7C, 0xC7, 0xE7, \
|
||||
0xC3, 0x0F, 0xE0, 0x07, 0xE0, 0xC7, 0xE1, 0x03, 0x70, 0xC7, 0xC3, 0xE3, 0x87, 0xC1, 0x07, 0xC0, 0xC7, 0xF8, 0xE3, \
|
||||
0x71, 0xC7, 0xC3, 0xE3, 0xE3, 0xC7, 0xC7, 0xC7, 0x47, 0xF8, 0xF3, 0x7F, 0x8F, 0xC3, 0xF1, 0xE3, 0x8F, 0xC7, 0x8F, \
|
||||
0x27, 0xFC, 0xE3, 0x7F, 0x8F, 0x81, 0xF1, 0xF1, 0x8F, 0xC7, 0xCF, 0x07, 0xFE, 0x03, 0x7E, 0x8F, 0x99, 0xF1, 0xF1, \
|
||||
0x8F, 0x07, 0xC0, 0x07, 0xFF, 0x07, 0x78, 0x9F, 0x99, 0xF9, 0xF1, 0x8F, 0x07, 0xE0, 0x07, 0xFE, 0x3F, 0x70, 0x1F, \
|
||||
0x18, 0xF8, 0xF3, 0x8F, 0x07, 0xF0, 0x27, 0xFC, 0xFF, 0x71, 0x3F, 0x18, 0xF8, 0xE3, 0xC7, 0xC7, 0xF1, 0x47, 0xF8, \
|
||||
0xF3, 0x63, 0x3F, 0x3C, 0xFC, 0xC3, 0xC3, 0xC7, 0xE3, 0xC7, 0xF0, 0xE1, 0x71, 0x3F, 0x3C, 0xFC, 0x07, 0xE0, 0xC7, \
|
||||
0xC7, 0xC7, 0xE1, 0x03, 0x70, 0x7F, 0x7E, 0xFE, 0x0F, 0xF0, 0xC7, 0x87, 0xC7, 0xC3, 0x07, 0x78, 0xFF, 0xFF, 0xFF, \
|
||||
0x7F, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0x1F, 0x7E, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, \
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x7F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, \
|
||||
0xFF, 0xFF, 0x7F \
|
||||
}
|
||||
|
||||
// QSPI Pins
|
||||
#define PIN_QSPI_SCK (0 + 3)
|
||||
#define PIN_QSPI_CS (0 + 26)
|
||||
#define PIN_QSPI_IO0 (0 + 30)
|
||||
#define PIN_QSPI_IO1 (0 + 29)
|
||||
#define PIN_QSPI_IO2 (0 + 28)
|
||||
#define PIN_QSPI_IO3 (0 + 2)
|
||||
|
||||
// On-board QSPI Flash
|
||||
#define EXTERNAL_FLASH_DEVICES W25Q32JVSS
|
||||
#define EXTERNAL_FLASH_USE_QSPI
|
||||
|
||||
// NFC is disabled via CONFIG_NFCT_PINS_AS_GPIOS=1 build flag
|
||||
// This configures P0.09 and P0.10 as regular GPIO pins instead of NFC pins
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
#ifdef __cplusplus
|
||||
#endif
|
||||
|
||||
#endif // _VARIANT_MUZI_BASE_
|
||||
Reference in New Issue
Block a user