mirror of
https://github.com/meshtastic/firmware.git
synced 2025-12-21 02:02:23 +00:00
Add initial support for Hackaday Communicator (#8771)
* Add initial support for Hackaday Communicator * Fork it! * Trunk * Remove unused elements from the HackadayCommunicatorKeyboard * Don't divide by zero.
This commit is contained in:
Jonathan Bennett
GitHub
59
variants/esp32s3/hackaday-communicator/pins_arduino.h
Normal file
59
variants/esp32s3/hackaday-communicator/pins_arduino.h
Normal file
@@ -0,0 +1,59 @@
|
||||
#ifndef Pins_Arduino_h
|
||||
#define Pins_Arduino_h
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#define USB_VID 0x303a
|
||||
#define USB_PID 0x1001
|
||||
|
||||
// static const uint8_t TX = 43;
|
||||
// static const uint8_t RX = 44;
|
||||
|
||||
static const uint8_t SDA = 47;
|
||||
static const uint8_t SCL = 14;
|
||||
|
||||
// Default SPI will be mapped to Radio
|
||||
static const uint8_t SS = 17;
|
||||
static const uint8_t MOSI = 3;
|
||||
static const uint8_t MISO = 9;
|
||||
static const uint8_t SCK = 8;
|
||||
|
||||
static const uint8_t A0 = 1;
|
||||
static const uint8_t A1 = 2;
|
||||
static const uint8_t A2 = 3;
|
||||
static const uint8_t A3 = 4;
|
||||
static const uint8_t A4 = 5;
|
||||
static const uint8_t A5 = 6;
|
||||
static const uint8_t A6 = 7;
|
||||
static const uint8_t A7 = 8;
|
||||
static const uint8_t A8 = 9;
|
||||
static const uint8_t A9 = 10;
|
||||
static const uint8_t A10 = 11;
|
||||
static const uint8_t A11 = 12;
|
||||
static const uint8_t A12 = 13;
|
||||
static const uint8_t A13 = 14;
|
||||
static const uint8_t A14 = 15;
|
||||
static const uint8_t A15 = 16;
|
||||
static const uint8_t A16 = 17;
|
||||
static const uint8_t A17 = 18;
|
||||
static const uint8_t A18 = 19;
|
||||
static const uint8_t A19 = 20;
|
||||
|
||||
static const uint8_t T1 = 1;
|
||||
static const uint8_t T2 = 2;
|
||||
static const uint8_t T3 = 3;
|
||||
static const uint8_t T4 = 4;
|
||||
static const uint8_t T5 = 5;
|
||||
static const uint8_t T6 = 6;
|
||||
static const uint8_t T7 = 7;
|
||||
static const uint8_t T8 = 8;
|
||||
static const uint8_t T9 = 9;
|
||||
static const uint8_t T10 = 10;
|
||||
static const uint8_t T11 = 11;
|
||||
static const uint8_t T12 = 12;
|
||||
static const uint8_t T13 = 13;
|
||||
static const uint8_t T14 = 14;
|
||||
|
||||
// static const uint8_t BAT_ADC_PIN = 4;
|
||||
|
||||
#endif /* Pins_Arduino_h */
|
||||
15
variants/esp32s3/hackaday-communicator/platformio.ini
Normal file
15
variants/esp32s3/hackaday-communicator/platformio.ini
Normal file
@@ -0,0 +1,15 @@
|
||||
; Hackaday Communicator
|
||||
[env:hackaday-communicator]
|
||||
extends = esp32s3_base
|
||||
board = hackaday-communicator
|
||||
board_check = true
|
||||
board_build.partitions = default_16MB.csv
|
||||
upload_protocol = esptool
|
||||
|
||||
build_flags = ${esp32s3_base.build_flags}
|
||||
-D HACKADAY_COMMUNICATOR
|
||||
-D BOARD_HAS_PSRAM
|
||||
-I variants/esp32s3/hackaday-communicator
|
||||
|
||||
lib_deps = ${esp32s3_base.lib_deps}
|
||||
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
|
||||
60
variants/esp32s3/hackaday-communicator/variant.h
Normal file
60
variants/esp32s3/hackaday-communicator/variant.h
Normal file
@@ -0,0 +1,60 @@
|
||||
#define TFT_BL 2
|
||||
#define SPI_FREQUENCY 2000000
|
||||
#define SPI_READ_FREQUENCY 16000000
|
||||
#define TFT_HEIGHT 142
|
||||
#define TFT_WIDTH 428
|
||||
#define TFT_OFFSET_X 0
|
||||
#define TFT_OFFSET_Y 0
|
||||
#define TFT_OFFSET_ROTATION 0
|
||||
#define SCREEN_TRANSITION_FRAMERATE 5
|
||||
#define HAS_SCREEN 1
|
||||
#define TFT_BLACK 0
|
||||
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
|
||||
|
||||
#define USE_POWERSAVE
|
||||
#define SLEEP_TIME 120
|
||||
|
||||
#define GPS_DEFAULT_NOT_PRESENT 1
|
||||
// #define GPS_RX_PIN 44
|
||||
// #define GPS_TX_PIN 43
|
||||
|
||||
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
|
||||
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
|
||||
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
|
||||
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
|
||||
|
||||
// keyboard
|
||||
#define I2C_SDA 47 // I2C pins for this board
|
||||
#define I2C_SCL 14
|
||||
// #define KB_POWERON -1 // must be set to HIGH
|
||||
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
|
||||
// #define KB_BL_PIN 46 // not used for now
|
||||
#define KB_INT 13
|
||||
#define CANNED_MESSAGE_MODULE_ENABLE 1
|
||||
|
||||
#define TFT_DC 39
|
||||
#define TFT_CS 41
|
||||
|
||||
// LoRa
|
||||
#define USE_SX1262
|
||||
|
||||
#define LORA_SCK 8
|
||||
#define LORA_MISO 9
|
||||
#define LORA_MOSI 3
|
||||
#define LORA_CS 17
|
||||
|
||||
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
|
||||
#define LORA_RESET 18
|
||||
#define LORA_DIO1 16 // SX1262 IRQ
|
||||
#define LORA_DIO2 15 // SX1262 BUSY
|
||||
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
|
||||
|
||||
#define SX126X_CS LORA_CS
|
||||
#define SX126X_DIO1 LORA_DIO1
|
||||
#define SX126X_BUSY LORA_DIO2
|
||||
#define SX126X_RESET LORA_RESET
|
||||
|
||||
#define SX126X_DIO2_AS_RF_SWITCH
|
||||
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
|
||||
|
||||
// #define LED_PIN 1
|
||||
Reference in New Issue
Block a user