rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-28 20:52:02 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into arduino-esp32-v3.2

Browse Source
This commit is contained in:
mverch67
2025-12-27 16:43:14 +01:00
parent 6b05f090dc 5510dae8d3
commit 5807be6db3
500 changed files with 49900 additions and 15192 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini
View File

@@ -5,4 +5,3 @@ build_flags =
${esp32s3_base.build_flags}
-D CDEBYTE_EORA_S3
-I variants/esp32s3/CDEBYTE_EoRa-S3
-D GPS_POWER_TOGGLE

2
variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
View File

@@ -14,6 +14,8 @@
#define BATTERY_PIN 8
#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
#define PIN_BUZZER 9
// Buttons

3
variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
View File

@@ -16,7 +16,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_579_GDEY0579T93 ;https://www.good-display.com/product/439.html
-DEINK_WIDTH=792
-DEINK_HEIGHT=272
@@ -46,7 +45,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_420_GYE042A87 ; similar Panel: GDEY042T81 : https://www.good-display.com/product/386.html
-DEINK_WIDTH=400
-DEINK_HEIGHT=300
@@ -76,7 +74,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_290_GDEY029T94 ;https://www.good-display.com/product/389.html
-DEINK_WIDTH=296
-DEINK_HEIGHT=128

10
variants/esp32s3/esp32s3.ini Normal file
View File

@@ -0,0 +1,10 @@
[esp32s3_base]
extends = esp32_base
custom_esp32_kind = esp32s3
monitor_speed = 115200
build_flags =
${esp32_base.build_flags}
-DCONFIG_BT_NIMBLE_EXT_ADV=1
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

59
variants/esp32s3/hackaday-communicator/pins_arduino.h Normal file
View File

@@ -0,0 +1,59 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// static const uint8_t TX = 43;
// static const uint8_t RX = 44;
static const uint8_t SDA = 47;
static const uint8_t SCL = 14;
// Default SPI will be mapped to Radio
static const uint8_t SS = 17;
static const uint8_t MOSI = 3;
static const uint8_t MISO = 9;
static const uint8_t SCK = 8;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
// static const uint8_t BAT_ADC_PIN = 4;
#endif /* Pins_Arduino_h */

15
variants/esp32s3/hackaday-communicator/platformio.ini Normal file
View File

@@ -0,0 +1,15 @@
; Hackaday Communicator
[env:hackaday-communicator]
extends = esp32s3_base
board = hackaday-communicator
board_check = true
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
-D HACKADAY_COMMUNICATOR
-D BOARD_HAS_PSRAM
-I variants/esp32s3/hackaday-communicator
lib_deps = ${esp32s3_base.lib_deps}
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip

61
variants/esp32s3/hackaday-communicator/variant.h Normal file
View File

@@ -0,0 +1,61 @@
#define TFT_BL 2
#define SPI_FREQUENCY 2000000
#define SPI_READ_FREQUENCY 16000000
#define TFT_HEIGHT 142
#define TFT_WIDTH 428
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_TRANSITION_FRAMERATE 5
#define HAS_SCREEN 1
#define TFT_BLACK 0
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define USE_POWERSAVE
#define SLEEP_TIME 120
#define GPS_DEFAULT_NOT_PRESENT 1
// #define GPS_RX_PIN 44
// #define GPS_TX_PIN 43
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
// keyboard
#define I2C_SDA 47 // I2C pins for this board
#define I2C_SCL 14
// #define KB_POWERON -1 // must be set to HIGH
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
// #define KB_BL_PIN 46 // not used for now
#define KB_INT 13
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define TFT_DC 39
#define TFT_CS 41
// LoRa
#define USE_SX1262
#define LORA_SCK 8
#define LORA_MISO 9
#define LORA_MOSI 3
#define LORA_CS 17
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 18
#define LORA_DIO1 16 // SX1262 IRQ
#define LORA_DIO2 15 // SX1262 BUSY
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// #define LED_PIN 1

1
variants/esp32s3/heltec_capsule_sensor_v3/platformio.ini
View File

@@ -6,5 +6,4 @@ board_build.partitions = default_8MB.csv
build_flags =
${esp32s3_base.build_flags} -I variants/esp32s3/heltec_capsule_sensor_v3
-D HELTEC_CAPSULE_SENSOR_V3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

1
variants/esp32s3/heltec_v3/platformio.ini
View File

@@ -8,4 +8,3 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V3
-I variants/esp32s3/heltec_v3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

2
variants/esp32s3/heltec_v3/variant.h
View File

@@ -40,3 +40,5 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define HAS_32768HZ 1

70
variants/esp32s3/heltec_v4/pins_arduino.h Normal file
View File

@@ -0,0 +1,70 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 35;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 4;
static const uint8_t SCL = 3;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
static const uint8_t Vext = 36;
static const uint8_t LED = 35;
static const uint8_t RST_OLED = 21;
static const uint8_t SCL_OLED = 18;
static const uint8_t SDA_OLED = 17;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
#endif /* Pins_Arduino_h */

112
variants/esp32s3/heltec_v4/platformio.ini Normal file
View File

@@ -0,0 +1,112 @@
[heltec_v4_base]
extends = esp32s3_base
board = heltec_v4
board_check = true
board_build.partitions = default_16MB.csv
build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V4
-I variants/esp32s3/heltec_v4
lib_deps =
${esp32s3_base.lib_deps}
[env:heltec-v4]
extends = heltec_v4_base
build_flags =
${heltec_v4_base.build_flags}
-D HELTEC_V4_OLED
-D USE_SSD1306 ; Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
-D LED_PIN=35
-D RESET_OLED=21
-D I2C_SDA=17
-D I2C_SCL=18
-D I2C_SDA1=4
-D I2C_SCL1=3
lib_deps =
${heltec_v4_base.lib_deps}
[env:heltec-v4-tft]
extends = heltec_v4_base
build_flags =
${heltec_v4_base.build_flags} ;-Os
-D HELTEC_V4_TFT
-D I2C_SDA=4
-D I2C_SCL=3
-D I2C_SDA1=47
-D I2C_SCL1=48
-D PIN_BUTTON2=35
-D PIN_BUZZER=6
-D USE_PIN_BUZZER=PIN_BUZZER
-D CONFIG_ARDUHAL_LOG_COLORS
-D RADIOLIB_DEBUG_SPI=0
-D RADIOLIB_DEBUG_PROTOCOL=0
-D RADIOLIB_DEBUG_BASIC=0
-D RADIOLIB_VERBOSE_ASSERT=0
-D RADIOLIB_SPI_PARANOID=0
-D CONFIG_DISABLE_HAL_LOCKS=1
-D INPUTDRIVER_BUTTON_TYPE=0
-D HAS_SCREEN=1
-D HAS_TFT=1
-D RAM_SIZE=1560
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D LV_USE_SYSMON=0
-D LV_USE_PROFILER=0
-D LV_USE_PERF_MONITOR=0
-D LV_USE_MEM_MONITOR=0
-D LV_USE_LOG=0
-D LV_BUILD_TEST=0
-D USE_LOG_DEBUG
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-D USE_PACKET_API
-D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
-D VIEW_320x240
-D MAP_FULL_REDRAW
-D DISPLAY_SIZE=320x240 ; landscape mode
-D LGFX_PIN_SCK=17
-D LGFX_PIN_MOSI=33
-D LGFX_PIN_DC=16
-D LGFX_PIN_CS=15
-D LGFX_PIN_BL=21
-D LGFX_PIN_RST=18
-D CUSTOM_TOUCH_DRIVER
-D TOUCH_SDA_PIN=I2C_SDA1
-D TOUCH_SCL_PIN=I2C_SCL1
-D TOUCH_INT_PIN=-1 ;45
-D TOUCH_RST_PIN=44
;base UI
-D TFT_CS=LGFX_PIN_CS
-D ST7789_CS=TFT_CS
-D ST7789_RS=LGFX_PIN_DC
-D ST7789_SDA=LGFX_PIN_MOSI
-D ST7789_SCK=LGFX_PIN_SCK
-D ST7789_RESET=LGFX_PIN_RST
-D ST7789_MISO=-1
-D ST7789_BUSY=-1
-D ST7789_BL=LGFX_PIN_BL
-D ST7789_SPI_HOST=SPI3_HOST
-D TFT_BL=ST7789_BL
-D SPI_FREQUENCY=40000000
-D SPI_READ_FREQUENCY=4000000
-D TFT_HEIGHT=320
-D TFT_WIDTH=240
-D TFT_OFFSET_X=0
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
lib_deps = ${heltec_v4_base.lib_deps}
; ${device-ui_base.lib_deps}
lovyan03/LovyanGFX@1.2.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
https://github.com/Quency-D/device-ui/archive/7c9870b8016641190b059bdd90fe16c1012a39eb.zip

54
variants/esp32s3/heltec_v4/variant.h Normal file
View File

@@ -0,0 +1,54 @@
#define VEXT_ENABLE 36 // active low, powers the oled display and the lora antenna boost
#define BUTTON_PIN 0
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 2
#define LORA_PA_TX_EN 46 // enable tx
#if HAS_TFT
#define USE_TFTDISPLAY 1
#endif
/*
* GPS pins
*/
#define GPS_L76K
#define PIN_GPS_RESET (42) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
#define GPS_RESET_MODE LOW
#define PIN_GPS_EN (34)
#define GPS_EN_ACTIVE LOW
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
#define PIN_GPS_STANDBY (40) // An output to wake GPS, low means allow sleep, high means force wake
#define PIN_GPS_PPS (41)
// Seems to be missing on this new board
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50

1
variants/esp32s3/heltec_wireless_tracker/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =

1
variants/esp32s3/heltec_wireless_tracker/variant.h
View File

@@ -27,6 +27,7 @@
#define TFT_OFFSET_Y -1
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
// pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
// GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR

1
variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker_V1_0
-D HELTEC_TRACKER_V1_0
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
${esp32s3_base.lib_deps}

2
variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
View File

@@ -27,6 +27,8 @@
#define VTFT_CTRL 46 // Heltec Tracker needs this pulled low for TFT
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define FORCE_LOW_RES 1
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
#define VEXT_ON_VALUE LOW

71
variants/esp32s3/heltec_wireless_tracker_v2/pins_arduino.h Normal file
View File

@@ -0,0 +1,71 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include "soc/soc_caps.h"
#include <stdint.h>
#define DISPLAY_HEIGHT 80
#define DISPLAY_WIDTH 160
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 5;
static const uint8_t SCL = 6;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
static const uint8_t Vext = 3;
static const uint8_t LED = 18;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
#endif /* Pins_Arduino_h */

13
variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini Normal file
View File

@@ -0,0 +1,13 @@
[env:heltec-wireless-tracker-v2]
extends = esp32s3_base
board = heltec_wireless_tracker_v2
board_build.partitions = default_8MB.csv
upload_protocol = esptool
build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker_v2
-D HELTEC_WIRELESS_TRACKER_V2
lib_deps =
${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@^1.2.0

79
variants/esp32s3/heltec_wireless_tracker_v2/variant.h Normal file
View File

@@ -0,0 +1,79 @@
#define LED_PIN 18
#define _VARIANT_HELTEC_WIRELESS_TRACKER
// I2C
#define I2C_SDA SDA
#define I2C_SCL SCL
// ST7735S TFT LCD
#define ST7735S 1 // there are different (sub-)versions of ST7735
#define ST7735_CS 38
#define ST7735_RS 40 // DC
#define ST7735_SDA 42 // MOSI
#define ST7735_SCK 41
#define ST7735_RESET 39
#define ST7735_MISO -1
#define ST7735_BUSY -1
#define TFT_BL 21
#define ST7735_SPI_HOST SPI3_HOST
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 16000000
#define SCREEN_ROTATE
#define TFT_HEIGHT DISPLAY_WIDTH
#define TFT_WIDTH DISPLAY_HEIGHT
#define TFT_OFFSET_X 24
#define TFT_OFFSET_Y 0
#define TFT_INVERT false
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
#define VEXT_ON_VALUE HIGH
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider.
#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 33
#define GPS_TX_PIN 34
#define PIN_GPS_RESET 35
#define PIN_GPS_PPS 36
// #define PIN_GPS_EN 3 // Uncomment to power off the GPS with triple-click on Tracker v2, though we'll also lose the
// display.
#define GPS_RESET_MODE LOW
#define GPS_UC6580
#define GPS_BAUDRATE 115200
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 4
#define LORA_PA_TX_EN 46 // enable tx

1
variants/esp32s3/heltec_wsl_v3/platformio.ini
View File

@@ -7,4 +7,3 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_WSL_V3
-I variants/esp32s3/heltec_wsl_v3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

2
variants/esp32s3/link32_s3_v1/platformio.ini
View File

@@ -1,11 +1,11 @@
[env:link32-s3-v1]
extends = esp32s3_base
board = esp32-s3-devkitc-1
board_level = extra
build_flags =
${esp32_base.build_flags}
-D LINK_32
-I variants/esp32s3/link32_s3_v1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DARDUINO_USB_CDC_ON_BOOT
-DARDUINO_USB_MODE=1
-DRADIOLIB_EXCLUDE_SX128X=1

1
variants/esp32s3/picomputer-s3/platformio.ini
View File

@@ -26,6 +26,7 @@ extends = env:picomputer-s3
build_flags =
${env:picomputer-s3.build_flags}
-D MESHTASTIC_EXCLUDE_WEBSERVER=1
-D INPUTDRIVER_MATRIX_TYPE=1
-D USE_PIN_BUZZER=PIN_BUZZER
-D USE_SX127x

1
variants/esp32s3/picomputer-s3/variant.h
View File

@@ -32,6 +32,7 @@
#define ST7789_CS 6
#define ST7789_RS 1
#define ST7789_BL 5
#define USE_TFTDISPLAY 1
#define ST7789_RESET -1
#define ST7789_MISO -1

1
variants/esp32s3/seeed-sensecap-indicator/variant.h
View File

@@ -37,6 +37,7 @@
#define TFT_BL 45
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT (6 | IO_EXPANDER)

1
variants/esp32s3/t-deck-pro/platformio.ini
View File

@@ -7,7 +7,6 @@ upload_protocol = esptool
build_flags =
${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
-D T_DECK_PRO
-D GPS_POWER_TOGGLE
-D USE_EINK
-D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
-D EINK_WIDTH=240

15
variants/esp32s3/t-deck-pro/variant.h
View File

@@ -93,11 +93,12 @@
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define HAS_PHYSICAL_KEYBOARD 1

1
variants/esp32s3/t-deck/platformio.ini
View File

@@ -9,7 +9,6 @@ upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
-D T_DECK
-D BOARD_HAS_PSRAM
-D GPS_POWER_TOGGLE
-I variants/esp32s3/t-deck
lib_deps = ${esp32s3_base.lib_deps}

2
variants/esp32s3/t-deck/variant.h
View File

@@ -22,6 +22,8 @@
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT 16

1
variants/esp32s3/t-eth-elite/platformio.ini
View File

@@ -9,7 +9,6 @@ build_flags =
-D T_ETH_ELITE
-D HAS_UDP_MULTICAST=1
-I variants/esp32s3/t-eth-elite
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
lib_ignore =
Ethernet

1
variants/esp32s3/t-watch-s3/variant.h
View File

@@ -18,6 +18,7 @@
#define TFT_OFFSET_ROTATION 2
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT 16

11
variants/esp32s3/tbeam-s3-core/rfswitch.h Normal file
View File

@@ -0,0 +1,11 @@
#include "RadioLib.h"
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

16
variants/esp32s3/tbeam-s3-core/variant.h
View File

@@ -15,6 +15,7 @@
// not found then probe for SX1262
#define USE_SX1262
#define USE_SX1268
#define USE_LR1121
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
@@ -34,6 +35,19 @@
// code)
#endif
// LR1121
#ifdef USE_LR1121
#define LR1121_IRQ_PIN 1
#define LR1121_NRESET_PIN LORA_RESET
#define LR1121_BUSY_PIN 4
#define LR1121_SPI_NSS_PIN 10
#define LR1121_SPI_SCK_PIN 12
#define LR1121_SPI_MOSI_PIN 11
#define LR1121_SPI_MISO_PIN 13
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
@@ -62,6 +76,6 @@
// #define PCF8563_RTC 0x51 //Putting definitions in variant. h does not compile correctly
// has 32768 Hz crystal
#define HAS_32768HZ
#define HAS_32768HZ 1
#define USE_SH1106

5
variants/esp32s3/tlora-pager/platformio.ini
View File

@@ -10,12 +10,11 @@ build_flags = ${esp32s3_base.build_flags}
-I variants/esp32s3/tlora-pager
-D T_LORA_PAGER
-D BOARD_HAS_PSRAM
-D GPS_POWER_TOGGLE
-D HAS_SDCARD
-D SDCARD_USE_SPI1
-D ENABLE_ROTARY_PULLUP
-D ENABLE_BUTTON_PULLUP
-D HALF_STEP
-D ROTARY_BUXTRONICS
lib_deps = ${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@1.2.7
@@ -26,7 +25,7 @@ lib_deps = ${esp32s3_base.lib_deps}
lewisxhe/SensorLib@0.3.1
https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
https://github.com/mverch67/RotaryEncoder/archive/da958a21389cbcd485989705df602a33e092dd88.zip
[env:tlora-pager-tft]
board_level = extra

12
variants/esp32s3/tlora-pager/rfswitch.h
View File

@@ -4,12 +4,8 @@ static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}},
{LR11x0::MODE_RX, {LOW, HIGH}},
{LR11x0::MODE_TX, {HIGH, LOW}},
{LR11x0::MODE_TX_HP, {HIGH, LOW}},
{LR11x0::MODE_TX_HF, {LOW, LOW}},
{LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}},
END_OF_MODE_TABLE,
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {LOW, HIGH}},
{LR11x0::MODE_TX, {HIGH, LOW}}, {LR11x0::MODE_TX_HP, {HIGH, LOW}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

2
variants/esp32s3/tlora-pager/variant.h
View File

@@ -20,6 +20,8 @@
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
#define I2C_SDA SDA
#define I2C_SCL SCL

6
variants/esp32s3/tlora_t3s3_epaper/platformio.ini
View File

@@ -8,13 +8,15 @@ build_flags =
${esp32_base.build_flags}
-D TLORA_T3S3_EPAPER
-I variants/esp32s3/tlora_t3s3_epaper
-DGPS_POWER_TOGGLE
-DUSE_EINK
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
-DEINK_LIMIT_FASTREFRESH=20 ; How many consecutive fast-refreshes are permitted //20
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates //30
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
lib_deps =
${esp32s3_base.lib_deps}

1
variants/esp32s3/tlora_t3s3_v1/platformio.ini
View File

@@ -6,4 +6,3 @@ upload_protocol = esptool
build_flags =
${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/esp32s3/tlora_t3s3_v1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

1
variants/esp32s3/tracksenger/internal/variant.h
View File

@@ -28,6 +28,7 @@
#define TFT_OFFSET_Y -1
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE 3 // active HIGH, powers the lora antenna boost
#define VEXT_ON_VALUE HIGH

1
variants/esp32s3/tracksenger/lcd/variant.h
View File

@@ -16,6 +16,7 @@
#define ST7789_CS 38
#define ST7789_RS 40
#define ST7789_BL 21
#define USE_TFTDISPLAY 1
// P#define TFT_BL 21 /* V1.1 PCB marking */
#define ST7789_RESET -1

3
variants/esp32s3/tracksenger/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/internal
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
@@ -25,7 +24,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/lcd
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
@@ -42,5 +40,4 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/oled
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

1
variants/esp32s3/unphone/variant.h
View File

@@ -36,6 +36,7 @@
#define TFT_INVERT false
#define SCREEN_ROTATE true
#define SCREEN_TRANSITION_FRAMERATE 5
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define USE_XPT2046 1