Merge branch 'master' into arduino-esp32-v3.2

2026-01-24 02:37:50 +00:00 · 2025-12-27 16:43:14 +01:00
parent 6b05f090dc 5510dae8d3
commit 5807be6db3
500 changed files with 49900 additions and 15192 deletions
--- a/variants/esp32/chatter2/variant.h
+++ b/variants/esp32/chatter2/variant.h
@@ -62,10 +62,12 @@
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_INVERT false
+#define FORCE_LOW_RES 1
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
 #define TFT_BACKLIGHT_ON LOW
+#define USE_TFTDISPLAY 1

 // Battery

--- a/variants/esp32/diy/dr-dev/platformio.ini
+++ b/variants/esp32/diy/dr-dev/platformio.ini
@@ -2,6 +2,7 @@
 [env:meshtastic-dr-dev]
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_upload.maximum_size = 4194304
 board_upload.maximum_ram_size = 532480
 build_flags =
--- a/variants/esp32/diy/hydra/variant.h
+++ b/variants/esp32/diy/hydra/variant.h
@@ -6,7 +6,6 @@
 #define GPS_TX_PIN 15
 #define GPS_RX_PIN 12
 #define PIN_GPS_EN 4
-#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here

 #define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
 // Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.
--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -0,0 +1,87 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+custom_esp32_kind = esp32
+custom_mtjson_part =
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.12.0
+
+extra_scripts =
+  ${env.extra_scripts}
+  pre:extra_scripts/esp32_pre.py
+  extra_scripts/esp32_extra.py
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DHAS_UDP_MULTICAST=1
+  ;-DDEBUG_HEAP
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^2.3.7
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/mverch67/libpax gitBranch=master
+  https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
--- a/variants/esp32/heltec_v2.1/platformio.ini
+++ b/variants/esp32/heltec_v2.1/platformio.ini
@@ -7,4 +7,3 @@ build_flags =
  ${esp32_base.build_flags}
  -D HELTEC_V2_1
  -I variants/esp32/heltec_v2.1
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
--- a/variants/esp32/heltec_wsl_v2.1/platformio.ini
+++ b/variants/esp32/heltec_wsl_v2.1/platformio.ini
@@ -6,4 +6,3 @@ build_flags =
  ${esp32_base.build_flags}
  -D PRIVATE_HW
  -I variants/esp32/heltec_wsl_v2.1
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -7,7 +7,6 @@ build_src_filter =
 build_flags = 
  ${esp32_base.build_flags}
  -I variants/esp32/m5stack_core
-  -DILI9341_DRIVER
  -DM5STACK
  -DUSER_SETUP_LOADED
  -DTFT_SDA_READ
--- a/variants/esp32/m5stack_core/variant.h
+++ b/variants/esp32/m5stack_core/variant.h
@@ -34,11 +34,13 @@
 #define GPS_RX_PIN 16
 #define GPS_TX_PIN 17

+#define ILI9341_DRIVER
 #define TFT_HEIGHT 240
 #define TFT_WIDTH 320
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_BUSY -1
+#define USE_TFTDISPLAY 1

 // LCD screens are slow, so slowdown the wipe so it looks better
 #define SCREEN_TRANSITION_FRAMERATE 1 // fps
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -2,15 +2,24 @@
 [env:tbeam]
 extends = esp32_base
 board = ttgo-t-beam
-board_level = pr
+board_level = extra
 board_check = true
-lib_deps =
-  ${esp32_base.lib_deps}
-build_flags = 
-  ${esp32_base.build_flags}
+lib_deps = ${esp32_base.lib_deps}
+build_flags = ${esp32_base.build_flags}
  -D TBEAM_V10
  -I variants/esp32/tbeam
-  -DGPS_POWER_TOGGLE ; comment this line to disable double press function on the user button to turn off gps entirely.
  -DBOARD_HAS_PSRAM
  -mfix-esp32-psram-cache-issue
 upload_speed = 921600
+
+[env:tbeam-displayshield]
+extends = env:tbeam
+
+build_flags =
+  ${env:tbeam.build_flags}
+  -D USE_ST7796
+
+lib_deps =
+  ${env:tbeam.lib_deps}
+  https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
+  lewisxhe/SensorLib@0.3.1 ; touchscreen addon
--- a/variants/esp32/tbeam/variant.h
+++ b/variants/esp32/tbeam/variant.h
@@ -42,4 +42,35 @@
 #define GPS_UBLOX
 #define GPS_RX_PIN 34
 #define GPS_TX_PIN 12
-// #define GPS_DEBUG
+// #define GPS_DEBUG
+
+// Used when the display shield is chosen
+#ifdef USE_ST7796
+
+#undef EXT_NOTIFY_OUT
+#undef LED_STATE_ON
+#undef LED_PIN
+
+#define HAS_CST226SE 1
+#define HAS_TOUCHSCREEN 1
+// #define TOUCH_IRQ 35 // broken in this version of the lib 0.3.1
+#ifndef TOUCH_IRQ
+#define TOUCH_IRQ -1
+#endif
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define USE_VIRTUAL_KEYBOARD 1
+
+#define ST7796_NSS 25
+#define ST7796_RS 13  // DC
+#define ST7796_SDA 14 // MOSI
+#define ST7796_SCK 15
+#define ST7796_RESET 2
+#define ST7796_MISO -1
+#define ST7796_BUSY -1
+#define VTFT_LEDA 4
+#define TFT_SPI_FREQUENCY 60000000
+#define TFT_HEIGHT 222
+#define TFT_WIDTH 480
+#define BRIGHTNESS_DEFAULT 100        // Medium Low Brightness
+#define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#endif
--- a/variants/esp32/tlora_v2_1_16/platformio.ini
+++ b/variants/esp32/tlora_v2_1_16/platformio.ini
@@ -4,5 +4,13 @@ board = ttgo-lora32-v21
 board_check = true
 build_flags = 
  ${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
 upload_speed = 115200
+
+[env:sugarcube]
+extends = env:tlora-v2-1-1_6
+board_level = extra
+build_flags =
+  ${env:tlora-v2-1-1_6.build_flags}
+  -DBUTTON_PIN=0
+  -DPIN_BUZZER=25
+  -DLED_PIN=-1
--- a/variants/esp32/tlora_v2_1_16/variant.h
+++ b/variants/esp32/tlora_v2_1_16/variant.h
@@ -8,7 +8,11 @@
 #define I2C_SDA 21 // I2C pins for this board
 #define I2C_SCL 22

+#if defined(LED_PIN) && LED_PIN == -1
+#undef LED_PIN
+#else
 #define LED_PIN 25 // If defined we will blink this LED
+#endif

 #define USE_RF95
 #define LORA_DIO0 26 // a No connect on the SX1262 module
--- a/variants/esp32/tlora_v2_1_16_tcxo/platformio.ini
+++ b/variants/esp32/tlora_v2_1_16_tcxo/platformio.ini
@@ -6,6 +6,5 @@ build_flags =
  ${esp32_base.build_flags}
  -D TLORA_V2_1_16
  -I variants/esp32/tlora_v2_1_16
-  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
  -D LORA_TCXO_GPIO=33
 upload_speed = 115200
--- a/variants/esp32/tlora_v3_3_0_tcxo/platformio.ini
+++ b/variants/esp32/tlora_v3_3_0_tcxo/platformio.ini
@@ -5,6 +5,5 @@ build_flags =
  ${esp32_base.build_flags}
  -D TLORA_V2_1_16
  -I variants/esp32/tlora_v2_1_16
-  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
  -D LORA_TCXO_GPIO=12
  -D BUTTON_PIN=0
--- a/variants/esp32/wiphone/variant.h
+++ b/variants/esp32/wiphone/variant.h
@@ -34,6 +34,7 @@
 #define ST7789_SCK 18
 #define ST7789_CS 5
 #define ST7789_RS 26
+#define USE_TFTDISPLAY 1
 // I don't have a 'wiphone' but this I think should not be defined this way (don't set TFT_BL if we don't have a hw way to control
 // it)
 // #define ST7789_BL -1 // EXTENDER_PIN(9)