rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-22 17:57:32 +00:00
Code Issues Packages Projects Releases Wiki Activity

Merge branch 'master' into arduino-esp32-v3.2

Browse Source
This commit is contained in:
mverch67
2025-12-27 16:43:14 +01:00
parent 6b05f090dc 5510dae8d3
commit 5807be6db3
500 changed files with 49900 additions and 15192 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
variants/esp32/chatter2/variant.h
View File

@@ -62,10 +62,12 @@
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
#define TFT_INVERT false
#define FORCE_LOW_RES 1
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define TFT_BACKLIGHT_ON LOW
#define USE_TFTDISPLAY 1
// Battery

1
variants/esp32/diy/dr-dev/platformio.ini
View File

@@ -2,6 +2,7 @@
[env:meshtastic-dr-dev]
extends = esp32_base
board = esp32doit-devkit-v1
board_level = extra
board_upload.maximum_size = 4194304
board_upload.maximum_ram_size = 532480
build_flags =

1
variants/esp32/diy/hydra/variant.h
View File

@@ -6,7 +6,6 @@
#define GPS_TX_PIN 15
#define GPS_RX_PIN 12
#define PIN_GPS_EN 4
#define GPS_POWER_TOGGLE // Moved definition from platformio.ini to here
#define BUTTON_PIN 39 // The middle button GPIO on the T-Beam
// Note: On the ESP32 base version, gpio34-39 are input-only, and do not have internal pull-ups.

87
variants/esp32/esp32.ini Normal file
View File

@@ -0,0 +1,87 @@
; Common settings for ESP targes, mixin with extends = esp32_base
[esp32_base]
extends = arduino_base
custom_esp32_kind = esp32
custom_mtjson_part =
platform =
# renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
platformio/espressif32@6.12.0
extra_scripts =
${env.extra_scripts}
pre:extra_scripts/esp32_pre.py
extra_scripts/esp32_extra.py
build_src_filter =
${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
upload_speed = 921600
debug_init_break = tbreak setup
monitor_filters = esp32_exception_decoder
board_build.filesystem = littlefs
# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
build_unflags = -fno-lto
build_flags =
${arduino_base.build_flags}
-flto
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
-DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
-DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
-DAXP_DEBUG_PORT=Serial
-DCONFIG_BT_NIMBLE_ENABLED
-DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
-DCONFIG_BT_NIMBLE_ROLE_CENTRAL_DISABLED
-DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
-DCONFIG_BT_NIMBLE_MAX_CCCDS=20
-DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DSERIAL_BUFFER_SIZE=4096
-DSERIAL_HAS_ON_RECEIVE
-DLIBPAX_ARDUINO
-DLIBPAX_WIFI
-DLIBPAX_BLE
-DHAS_UDP_MULTICAST=1
;-DDEBUG_HEAP
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
# renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
h2zero/NimBLE-Arduino@^2.3.7
# renovate: datasource=git-refs depName=libpax packageName=https://github.com/mverch67/libpax gitBranch=master
https://github.com/mverch67/libpax/archive/6f52ee989301cdabaeef00bcbf93bff55708ce2f.zip
# renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
lib_ignore =
segger_rtt
ESP32 BLE Arduino
; leave this commented out to avoid breaking Windows
;upload_port = /dev/ttyUSB0
;monitor_port = /dev/ttyUSB0
; Please don't delete these lines. JM uses them.
;upload_port = /dev/cu.SLAB_USBtoUART
;monitor_port = /dev/cu.SLAB_USBtoUART
; customize the partition table
; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
board_build.partitions = partition-table.csv

1
variants/esp32/heltec_v2.1/platformio.ini
View File

@@ -7,4 +7,3 @@ build_flags =
${esp32_base.build_flags}
-D HELTEC_V2_1
-I variants/esp32/heltec_v2.1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

1
variants/esp32/heltec_wsl_v2.1/platformio.ini
View File

@@ -6,4 +6,3 @@ build_flags =
${esp32_base.build_flags}
-D PRIVATE_HW
-I variants/esp32/heltec_wsl_v2.1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

1
variants/esp32/m5stack_core/platformio.ini
View File

@@ -7,7 +7,6 @@ build_src_filter =
build_flags =
${esp32_base.build_flags}
-I variants/esp32/m5stack_core
-DILI9341_DRIVER
-DM5STACK
-DUSER_SETUP_LOADED
-DTFT_SDA_READ

2
variants/esp32/m5stack_core/variant.h
View File

@@ -34,11 +34,13 @@
#define GPS_RX_PIN 16
#define GPS_TX_PIN 17
#define ILI9341_DRIVER
#define TFT_HEIGHT 240
#define TFT_WIDTH 320
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
#define TFT_BUSY -1
#define USE_TFTDISPLAY 1
// LCD screens are slow, so slowdown the wipe so it looks better
#define SCREEN_TRANSITION_FRAMERATE 1 // fps

21
variants/esp32/tbeam/platformio.ini
View File

@@ -2,15 +2,24 @@
[env:tbeam]
extends = esp32_base
board = ttgo-t-beam
board_level = pr
board_level = extra
board_check = true
lib_deps =
${esp32_base.lib_deps}
build_flags =
${esp32_base.build_flags}
lib_deps = ${esp32_base.lib_deps}
build_flags = ${esp32_base.build_flags}
-D TBEAM_V10
-I variants/esp32/tbeam
-DGPS_POWER_TOGGLE ; comment this line to disable double press function on the user button to turn off gps entirely.
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
upload_speed = 921600
[env:tbeam-displayshield]
extends = env:tbeam
build_flags =
${env:tbeam.build_flags}
-D USE_ST7796
lib_deps =
${env:tbeam.lib_deps}
https://github.com/meshtastic/st7796/archive/refs/tags/1.0.5.zip ; display addon
lewisxhe/SensorLib@0.3.1 ; touchscreen addon

33
variants/esp32/tbeam/variant.h
View File

@@ -42,4 +42,35 @@
#define GPS_UBLOX
#define GPS_RX_PIN 34
#define GPS_TX_PIN 12
// #define GPS_DEBUG
// #define GPS_DEBUG
// Used when the display shield is chosen
#ifdef USE_ST7796
#undef EXT_NOTIFY_OUT
#undef LED_STATE_ON
#undef LED_PIN
#define HAS_CST226SE 1
#define HAS_TOUCHSCREEN 1
// #define TOUCH_IRQ 35 // broken in this version of the lib 0.3.1
#ifndef TOUCH_IRQ
#define TOUCH_IRQ -1
#endif
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define USE_VIRTUAL_KEYBOARD 1
#define ST7796_NSS 25
#define ST7796_RS 13 // DC
#define ST7796_SDA 14 // MOSI
#define ST7796_SCK 15
#define ST7796_RESET 2
#define ST7796_MISO -1
#define ST7796_BUSY -1
#define VTFT_LEDA 4
#define TFT_SPI_FREQUENCY 60000000
#define TFT_HEIGHT 222
#define TFT_WIDTH 480
#define BRIGHTNESS_DEFAULT 100 // Medium Low Brightness
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#endif

10
variants/esp32/tlora_v2_1_16/platformio.ini
View File

@@ -4,5 +4,13 @@ board = ttgo-lora32-v21
board_check = true
build_flags =
${esp32_base.build_flags} -D TLORA_V2_1_16 -I variants/esp32/tlora_v2_1_16
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
upload_speed = 115200
[env:sugarcube]
extends = env:tlora-v2-1-1_6
board_level = extra
build_flags =
${env:tlora-v2-1-1_6.build_flags}
-DBUTTON_PIN=0
-DPIN_BUZZER=25
-DLED_PIN=-1

4
variants/esp32/tlora_v2_1_16/variant.h
View File

@@ -8,7 +8,11 @@
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#if defined(LED_PIN) && LED_PIN == -1
#undef LED_PIN
#else
#define LED_PIN 25 // If defined we will blink this LED
#endif
#define USE_RF95
#define LORA_DIO0 26 // a No connect on the SX1262 module

1
variants/esp32/tlora_v2_1_16_tcxo/platformio.ini
View File

@@ -6,6 +6,5 @@ build_flags =
${esp32_base.build_flags}
-D TLORA_V2_1_16
-I variants/esp32/tlora_v2_1_16
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-D LORA_TCXO_GPIO=33
upload_speed = 115200

1
variants/esp32/tlora_v3_3_0_tcxo/platformio.ini
View File

@@ -5,6 +5,5 @@ build_flags =
${esp32_base.build_flags}
-D TLORA_V2_1_16
-I variants/esp32/tlora_v2_1_16
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-D LORA_TCXO_GPIO=12
-D BUTTON_PIN=0

1
variants/esp32/wiphone/variant.h
View File

@@ -34,6 +34,7 @@
#define ST7789_SCK 18
#define ST7789_CS 5
#define ST7789_RS 26
#define USE_TFTDISPLAY 1
// I don't have a 'wiphone' but this I think should not be defined this way (don't set TFT_BL if we don't have a hw way to control
// it)
// #define ST7789_BL -1 // EXTENDER_PIN(9)

11
variants/esp32c3/esp32c3.ini Normal file
View File

@@ -0,0 +1,11 @@
[esp32c3_base]
extends = esp32_base
custom_esp32_kind = esp32c3
monitor_speed = 115200
monitor_filters = esp32_c3_exception_decoder
build_flags =
${esp32_base.build_flags}
-DCONFIG_BT_NIMBLE_EXT_ADV=1
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

47
variants/esp32c6/esp32c6.ini Normal file
View File

@@ -0,0 +1,47 @@
[esp32c6_base]
extends = esp32_base
platform =
# Do not renovate until we have switched to pioarduino tagged builds
https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
build_flags =
${arduino_base.build_flags}
-Wall
-Wextra
-Isrc/platform/esp32
-std=c++11
-DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
-DSERIAL_BUFFER_SIZE=4096
-DLIBPAX_ARDUINO
-DLIBPAX_WIFI
-DLIBPAX_BLE
-DMESHTASTIC_EXCLUDE_WEBSERVER
;-DDEBUG_HEAP
; TEMP
-DHAS_BLUETOOTH=0
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
-DMESHTASTIC_EXCLUDE_BLUETOOTH
lib_deps =
${arduino_base.lib_deps}
${networking_base.lib_deps}
${environmental_base.lib_deps}
${environmental_extra.lib_deps}
${radiolib_base.lib_deps}
# renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
lewisxhe/XPowersLib@0.3.2
# renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
build_src_filter =
${esp32_base.build_src_filter} -<mesh/http>
monitor_speed = 460800
monitor_filters = esp32_c3_exception_decoder
lib_ignore =
NonBlockingRTTTL
NimBLE-Arduino
libpax

5
variants/esp32c6/m5stack_unitc6l/platformio.ini
View File

@@ -13,7 +13,7 @@ build_unflags =
lib_deps =
${esp32c6_base.lib_deps}
adafruit/Adafruit NeoPixel@^1.12.3
h2zero/NimBLE-Arduino@^2.3.6
h2zero/NimBLE-Arduino@^2.3.7
build_flags =
${esp32c6_base.build_flags}
-D M5STACK_UNITC6L
@@ -22,11 +22,8 @@ build_flags =
-DARDUINO_USB_CDC_ON_BOOT=1
-DARDUINO_USB_MODE=1
-D HAS_BLUETOOTH=1
-D MESHTASTIC_EXCLUDE_WEBSERVER
-D MESHTASTIC_EXCLUDE_MQTT
-DCONFIG_BT_NIMBLE_EXT_ADV=1
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
-D NIMBLE_TWO
monitor_speed=115200
lib_ignore =
NonBlockingRTTTL

19
variants/esp32s2/esp32s2.ini Normal file
View File

@@ -0,0 +1,19 @@
[esp32s2_base]
extends = esp32_base
custom_esp32_kind = esp32s2
build_src_filter =
${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
monitor_speed = 115200
build_flags =
${esp32_base.build_flags}
-DHAS_BLUETOOTH=0
-DMESHTASTIC_EXCLUDE_PAXCOUNTER
-DMESHTASTIC_EXCLUDE_BLUETOOTH
lib_ignore =
${esp32_base.lib_ignore}
NimBLE-Arduino
libpax

1
variants/esp32s3/CDEBYTE_EoRa-S3/platformio.ini
View File

@@ -5,4 +5,3 @@ build_flags =
${esp32s3_base.build_flags}
-D CDEBYTE_EORA_S3
-I variants/esp32s3/CDEBYTE_EoRa-S3
-D GPS_POWER_TOGGLE

2
variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
View File

@@ -14,6 +14,8 @@
#define BATTERY_PIN 8
#define ADC_CHANNEL ADC1_GPIO8_CHANNEL
#define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
#define PIN_BUZZER 9
// Buttons

3
variants/esp32s3/crowpanel-esp32s3-5-epaper/platformio.ini
View File

@@ -16,7 +16,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_579_GDEY0579T93 ;https://www.good-display.com/product/439.html
-DEINK_WIDTH=792
-DEINK_HEIGHT=272
@@ -46,7 +45,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_420_GYE042A87 ; similar Panel: GDEY042T81 : https://www.good-display.com/product/386.html
-DEINK_WIDTH=400
-DEINK_HEIGHT=300
@@ -76,7 +74,6 @@ build_flags =
-I variants/esp32s3/crowpanel-esp32s3-5-epaper
-D PRIVATE_HW
-DBOARD_HAS_PSRAM
-DGPS_POWER_TOGGLE
-DEINK_DISPLAY_MODEL=GxEPD2_290_GDEY029T94 ;https://www.good-display.com/product/389.html
-DEINK_WIDTH=296
-DEINK_HEIGHT=128

10
variants/esp32s3/esp32s3.ini Normal file
View File

@@ -0,0 +1,10 @@
[esp32s3_base]
extends = esp32_base
custom_esp32_kind = esp32s3
monitor_speed = 115200
build_flags =
${esp32_base.build_flags}
-DCONFIG_BT_NIMBLE_EXT_ADV=1
-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2

59
variants/esp32s3/hackaday-communicator/pins_arduino.h Normal file
View File

@@ -0,0 +1,59 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// static const uint8_t TX = 43;
// static const uint8_t RX = 44;
static const uint8_t SDA = 47;
static const uint8_t SCL = 14;
// Default SPI will be mapped to Radio
static const uint8_t SS = 17;
static const uint8_t MOSI = 3;
static const uint8_t MISO = 9;
static const uint8_t SCK = 8;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
// static const uint8_t BAT_ADC_PIN = 4;
#endif /* Pins_Arduino_h */

15
variants/esp32s3/hackaday-communicator/platformio.ini Normal file
View File

@@ -0,0 +1,15 @@
; Hackaday Communicator
[env:hackaday-communicator]
extends = esp32s3_base
board = hackaday-communicator
board_check = true
board_build.partitions = default_16MB.csv
upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
-D HACKADAY_COMMUNICATOR
-D BOARD_HAS_PSRAM
-I variants/esp32s3/hackaday-communicator
lib_deps = ${esp32s3_base.lib_deps}
https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip

61
variants/esp32s3/hackaday-communicator/variant.h Normal file
View File

@@ -0,0 +1,61 @@
#define TFT_BL 2
#define SPI_FREQUENCY 2000000
#define SPI_READ_FREQUENCY 16000000
#define TFT_HEIGHT 142
#define TFT_WIDTH 428
#define TFT_OFFSET_X 0
#define TFT_OFFSET_Y 0
#define TFT_OFFSET_ROTATION 0
#define SCREEN_TRANSITION_FRAMERATE 5
#define HAS_SCREEN 1
#define TFT_BLACK 0
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define USE_POWERSAVE
#define SLEEP_TIME 120
#define GPS_DEFAULT_NOT_PRESENT 1
// #define GPS_RX_PIN 44
// #define GPS_TX_PIN 43
// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
// ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
// keyboard
#define I2C_SDA 47 // I2C pins for this board
#define I2C_SCL 14
// #define KB_POWERON -1 // must be set to HIGH
// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
// #define KB_BL_PIN 46 // not used for now
#define KB_INT 13
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define TFT_DC 39
#define TFT_CS 41
// LoRa
#define USE_SX1262
#define LORA_SCK 8
#define LORA_MISO 9
#define LORA_MOSI 3
#define LORA_CS 17
// #define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 18
#define LORA_DIO1 16 // SX1262 IRQ
#define LORA_DIO2 15 // SX1262 BUSY
// #define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// #define LED_PIN 1

1
variants/esp32s3/heltec_capsule_sensor_v3/platformio.ini
View File

@@ -6,5 +6,4 @@ board_build.partitions = default_8MB.csv
build_flags =
${esp32s3_base.build_flags} -I variants/esp32s3/heltec_capsule_sensor_v3
-D HELTEC_CAPSULE_SENSOR_V3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

1
variants/esp32s3/heltec_v3/platformio.ini
View File

@@ -8,4 +8,3 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V3
-I variants/esp32s3/heltec_v3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

2
variants/esp32s3/heltec_v3/variant.h
View File

@@ -40,3 +40,5 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define HAS_32768HZ 1

70
variants/esp32s3/heltec_v4/pins_arduino.h Normal file
View File

@@ -0,0 +1,70 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 35;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN // allow testing #ifdef LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 4;
static const uint8_t SCL = 3;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
static const uint8_t Vext = 36;
static const uint8_t LED = 35;
static const uint8_t RST_OLED = 21;
static const uint8_t SCL_OLED = 18;
static const uint8_t SDA_OLED = 17;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
#endif /* Pins_Arduino_h */

112
variants/esp32s3/heltec_v4/platformio.ini Normal file
View File

@@ -0,0 +1,112 @@
[heltec_v4_base]
extends = esp32s3_base
board = heltec_v4
board_check = true
board_build.partitions = default_16MB.csv
build_flags =
${esp32s3_base.build_flags}
-D HELTEC_V4
-I variants/esp32s3/heltec_v4
lib_deps =
${esp32s3_base.lib_deps}
[env:heltec-v4]
extends = heltec_v4_base
build_flags =
${heltec_v4_base.build_flags}
-D HELTEC_V4_OLED
-D USE_SSD1306 ; Heltec_v4 has an SSD1315 display (compatible with SSD1306 driver)
-D LED_PIN=35
-D RESET_OLED=21
-D I2C_SDA=17
-D I2C_SCL=18
-D I2C_SDA1=4
-D I2C_SCL1=3
lib_deps =
${heltec_v4_base.lib_deps}
[env:heltec-v4-tft]
extends = heltec_v4_base
build_flags =
${heltec_v4_base.build_flags} ;-Os
-D HELTEC_V4_TFT
-D I2C_SDA=4
-D I2C_SCL=3
-D I2C_SDA1=47
-D I2C_SCL1=48
-D PIN_BUTTON2=35
-D PIN_BUZZER=6
-D USE_PIN_BUZZER=PIN_BUZZER
-D CONFIG_ARDUHAL_LOG_COLORS
-D RADIOLIB_DEBUG_SPI=0
-D RADIOLIB_DEBUG_PROTOCOL=0
-D RADIOLIB_DEBUG_BASIC=0
-D RADIOLIB_VERBOSE_ASSERT=0
-D RADIOLIB_SPI_PARANOID=0
-D CONFIG_DISABLE_HAL_LOCKS=1
-D INPUTDRIVER_BUTTON_TYPE=0
-D HAS_SCREEN=1
-D HAS_TFT=1
-D RAM_SIZE=1560
-D LV_LVGL_H_INCLUDE_SIMPLE
-D LV_CONF_INCLUDE_SIMPLE
-D LV_COMP_CONF_INCLUDE_SIMPLE
-D LV_USE_SYSMON=0
-D LV_USE_PROFILER=0
-D LV_USE_PERF_MONITOR=0
-D LV_USE_MEM_MONITOR=0
-D LV_USE_LOG=0
-D LV_BUILD_TEST=0
-D USE_LOG_DEBUG
-D LOG_DEBUG_INC=\"DebugConfiguration.h\"
-D USE_PACKET_API
-D LGFX_DRIVER=LGFX_HELTEC_V4_TFT
-D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_HELTEC_V4_TFT.h\"
-D VIEW_320x240
-D MAP_FULL_REDRAW
-D DISPLAY_SIZE=320x240 ; landscape mode
-D LGFX_PIN_SCK=17
-D LGFX_PIN_MOSI=33
-D LGFX_PIN_DC=16
-D LGFX_PIN_CS=15
-D LGFX_PIN_BL=21
-D LGFX_PIN_RST=18
-D CUSTOM_TOUCH_DRIVER
-D TOUCH_SDA_PIN=I2C_SDA1
-D TOUCH_SCL_PIN=I2C_SCL1
-D TOUCH_INT_PIN=-1 ;45
-D TOUCH_RST_PIN=44
;base UI
-D TFT_CS=LGFX_PIN_CS
-D ST7789_CS=TFT_CS
-D ST7789_RS=LGFX_PIN_DC
-D ST7789_SDA=LGFX_PIN_MOSI
-D ST7789_SCK=LGFX_PIN_SCK
-D ST7789_RESET=LGFX_PIN_RST
-D ST7789_MISO=-1
-D ST7789_BUSY=-1
-D ST7789_BL=LGFX_PIN_BL
-D ST7789_SPI_HOST=SPI3_HOST
-D TFT_BL=ST7789_BL
-D SPI_FREQUENCY=40000000
-D SPI_READ_FREQUENCY=4000000
-D TFT_HEIGHT=320
-D TFT_WIDTH=240
-D TFT_OFFSET_X=0
-D TFT_OFFSET_Y=0
-D TFT_OFFSET_ROTATION=0
-D SCREEN_ROTATE
-D SCREEN_TRANSITION_FRAMERATE=5
-D BRIGHTNESS_DEFAULT=130 ; Medium Low Brightness
-D HAS_TOUCHSCREEN=1
-D TOUCH_I2C_PORT=0
-D TOUCH_SLAVE_ADDRESS=0x2E
-D SCREEN_TOUCH_INT=TOUCH_INT_PIN
-D SCREEN_TOUCH_RST=TOUCH_RST_PIN
lib_deps = ${heltec_v4_base.lib_deps}
; ${device-ui_base.lib_deps}
lovyan03/LovyanGFX@1.2.0
https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
https://github.com/Quency-D/device-ui/archive/7c9870b8016641190b059bdd90fe16c1012a39eb.zip

54
variants/esp32s3/heltec_v4/variant.h Normal file
View File

@@ -0,0 +1,54 @@
#define VEXT_ENABLE 36 // active low, powers the oled display and the lora antenna boost
#define BUTTON_PIN 0
#define ADC_CTRL 37
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 2
#define LORA_PA_TX_EN 46 // enable tx
#if HAS_TFT
#define USE_TFTDISPLAY 1
#endif
/*
* GPS pins
*/
#define GPS_L76K
#define PIN_GPS_RESET (42) // An output to reset L76K GPS. As per datasheet, low for > 100ms will reset the L76K
#define GPS_RESET_MODE LOW
#define PIN_GPS_EN (34)
#define GPS_EN_ACTIVE LOW
#define PERIPHERAL_WARMUP_MS 1000 // Make sure I2C QuickLink has stable power before continuing
#define PIN_GPS_STANDBY (40) // An output to wake GPS, low means allow sleep, high means force wake
#define PIN_GPS_PPS (41)
// Seems to be missing on this new board
#define GPS_TX_PIN (38) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (39) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50

1
variants/esp32s3/heltec_wireless_tracker/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =

1
variants/esp32s3/heltec_wireless_tracker/variant.h
View File

@@ -27,6 +27,7 @@
#define TFT_OFFSET_Y -1
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
// pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
// GPS UC6580: GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR

1
variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker_V1_0
-D HELTEC_TRACKER_V1_0
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
${esp32s3_base.lib_deps}

2
variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
View File

@@ -27,6 +27,8 @@
#define VTFT_CTRL 46 // Heltec Tracker needs this pulled low for TFT
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define FORCE_LOW_RES 1
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
#define VEXT_ON_VALUE LOW

71
variants/esp32s3/heltec_wireless_tracker_v2/pins_arduino.h Normal file
View File

@@ -0,0 +1,71 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include "soc/soc_caps.h"
#include <stdint.h>
#define DISPLAY_HEIGHT 80
#define DISPLAY_WIDTH 160
#define USB_VID 0x303a
#define USB_PID 0x1001
static const uint8_t LED_BUILTIN = 18;
#define BUILTIN_LED LED_BUILTIN // backward compatibility
#define LED_BUILTIN LED_BUILTIN
static const uint8_t TX = 43;
static const uint8_t RX = 44;
static const uint8_t SDA = 5;
static const uint8_t SCL = 6;
static const uint8_t SS = 8;
static const uint8_t MOSI = 10;
static const uint8_t MISO = 11;
static const uint8_t SCK = 9;
static const uint8_t A0 = 1;
static const uint8_t A1 = 2;
static const uint8_t A2 = 3;
static const uint8_t A3 = 4;
static const uint8_t A4 = 5;
static const uint8_t A5 = 6;
static const uint8_t A6 = 7;
static const uint8_t A7 = 8;
static const uint8_t A8 = 9;
static const uint8_t A9 = 10;
static const uint8_t A10 = 11;
static const uint8_t A11 = 12;
static const uint8_t A12 = 13;
static const uint8_t A13 = 14;
static const uint8_t A14 = 15;
static const uint8_t A15 = 16;
static const uint8_t A16 = 17;
static const uint8_t A17 = 18;
static const uint8_t A18 = 19;
static const uint8_t A19 = 20;
static const uint8_t T1 = 1;
static const uint8_t T2 = 2;
static const uint8_t T3 = 3;
static const uint8_t T4 = 4;
static const uint8_t T5 = 5;
static const uint8_t T6 = 6;
static const uint8_t T7 = 7;
static const uint8_t T8 = 8;
static const uint8_t T9 = 9;
static const uint8_t T10 = 10;
static const uint8_t T11 = 11;
static const uint8_t T12 = 12;
static const uint8_t T13 = 13;
static const uint8_t T14 = 14;
static const uint8_t Vext = 3;
static const uint8_t LED = 18;
static const uint8_t RST_LoRa = 12;
static const uint8_t BUSY_LoRa = 13;
static const uint8_t DIO0 = 14;
#endif /* Pins_Arduino_h */

13
variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini Normal file
View File

@@ -0,0 +1,13 @@
[env:heltec-wireless-tracker-v2]
extends = esp32s3_base
board = heltec_wireless_tracker_v2
board_build.partitions = default_8MB.csv
upload_protocol = esptool
build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/heltec_wireless_tracker_v2
-D HELTEC_WIRELESS_TRACKER_V2
lib_deps =
${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@^1.2.0

79
variants/esp32s3/heltec_wireless_tracker_v2/variant.h Normal file
View File

@@ -0,0 +1,79 @@
#define LED_PIN 18
#define _VARIANT_HELTEC_WIRELESS_TRACKER
// I2C
#define I2C_SDA SDA
#define I2C_SCL SCL
// ST7735S TFT LCD
#define ST7735S 1 // there are different (sub-)versions of ST7735
#define ST7735_CS 38
#define ST7735_RS 40 // DC
#define ST7735_SDA 42 // MOSI
#define ST7735_SCK 41
#define ST7735_RESET 39
#define ST7735_MISO -1
#define ST7735_BUSY -1
#define TFT_BL 21
#define ST7735_SPI_HOST SPI3_HOST
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 16000000
#define SCREEN_ROTATE
#define TFT_HEIGHT DISPLAY_WIDTH
#define TFT_WIDTH DISPLAY_HEIGHT
#define TFT_OFFSET_X 24
#define TFT_OFFSET_Y 0
#define TFT_INVERT false
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
#define VEXT_ON_VALUE HIGH
#define BUTTON_PIN 0
#define BATTERY_PIN 1 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider.
#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 33
#define GPS_TX_PIN 34
#define PIN_GPS_RESET 35
#define PIN_GPS_PPS 36
// #define PIN_GPS_EN 3 // Uncomment to power off the GPS with triple-click on Tracker v2, though we'll also lose the
// display.
#define GPS_RESET_MODE LOW
#define GPS_UC6580
#define GPS_BAUDRATE 115200
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TCXO is enabled
#define LORA_SCK 9
#define LORA_MISO 11
#define LORA_MOSI 10
#define LORA_CS 8
#define SX126X_CS LORA_CS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 4
#define LORA_PA_TX_EN 46 // enable tx

1
variants/esp32s3/heltec_wsl_v3/platformio.ini
View File

@@ -7,4 +7,3 @@ build_flags =
${esp32s3_base.build_flags}
-D HELTEC_WSL_V3
-I variants/esp32s3/heltec_wsl_v3
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

2
variants/esp32s3/link32_s3_v1/platformio.ini
View File

@@ -1,11 +1,11 @@
[env:link32-s3-v1]
extends = esp32s3_base
board = esp32-s3-devkitc-1
board_level = extra
build_flags =
${esp32_base.build_flags}
-D LINK_32
-I variants/esp32s3/link32_s3_v1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DARDUINO_USB_CDC_ON_BOOT
-DARDUINO_USB_MODE=1
-DRADIOLIB_EXCLUDE_SX128X=1

1
variants/esp32s3/picomputer-s3/platformio.ini
View File

@@ -26,6 +26,7 @@ extends = env:picomputer-s3
build_flags =
${env:picomputer-s3.build_flags}
-D MESHTASTIC_EXCLUDE_WEBSERVER=1
-D INPUTDRIVER_MATRIX_TYPE=1
-D USE_PIN_BUZZER=PIN_BUZZER
-D USE_SX127x

1
variants/esp32s3/picomputer-s3/variant.h
View File

@@ -32,6 +32,7 @@
#define ST7789_CS 6
#define ST7789_RS 1
#define ST7789_BL 5
#define USE_TFTDISPLAY 1
#define ST7789_RESET -1
#define ST7789_MISO -1

1
variants/esp32s3/seeed-sensecap-indicator/variant.h
View File

@@ -37,6 +37,7 @@
#define TFT_BL 45
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT (6 | IO_EXPANDER)

1
variants/esp32s3/t-deck-pro/platformio.ini
View File

@@ -7,7 +7,6 @@ upload_protocol = esptool
build_flags =
${esp32_base.build_flags} -I variants/esp32s3/t-deck-pro
-D T_DECK_PRO
-D GPS_POWER_TOGGLE
-D USE_EINK
-D EINK_DISPLAY_MODEL=GxEPD2_310_GDEQ031T10
-D EINK_WIDTH=240

15
variants/esp32s3/t-deck-pro/variant.h
View File

@@ -93,11 +93,12 @@
// Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
// code)
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define MODEM_POWER_EN 41
#define MODEM_PWRKEY 40
#define MODEM_RST 9
#define MODEM_RI 7
#define MODEM_DTR 8
#define MODEM_RX 10
#define MODEM_TX 11
#define HAS_PHYSICAL_KEYBOARD 1

1
variants/esp32s3/t-deck/platformio.ini
View File

@@ -9,7 +9,6 @@ upload_protocol = esptool
build_flags = ${esp32s3_base.build_flags}
-D T_DECK
-D BOARD_HAS_PSRAM
-D GPS_POWER_TOGGLE
-I variants/esp32s3/t-deck
lib_deps = ${esp32s3_base.lib_deps}

2
variants/esp32s3/t-deck/variant.h
View File

@@ -22,6 +22,8 @@
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT 16

1
variants/esp32s3/t-eth-elite/platformio.ini
View File

@@ -9,7 +9,6 @@ build_flags =
-D T_ETH_ELITE
-D HAS_UDP_MULTICAST=1
-I variants/esp32s3/t-eth-elite
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
lib_ignore =
Ethernet

1
variants/esp32s3/t-watch-s3/variant.h
View File

@@ -18,6 +18,7 @@
#define TFT_OFFSET_ROTATION 2
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5 // fps
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define SCREEN_TOUCH_INT 16

11
variants/esp32s3/tbeam-s3-core/rfswitch.h Normal file
View File

@@ -0,0 +1,11 @@
#include "RadioLib.h"
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {LOW, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

16
variants/esp32s3/tbeam-s3-core/variant.h
View File

@@ -15,6 +15,7 @@
// not found then probe for SX1262
#define USE_SX1262
#define USE_SX1268
#define USE_LR1121
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_RESET 5
@@ -34,6 +35,19 @@
// code)
#endif
// LR1121
#ifdef USE_LR1121
#define LR1121_IRQ_PIN 1
#define LR1121_NRESET_PIN LORA_RESET
#define LR1121_BUSY_PIN 4
#define LR1121_SPI_NSS_PIN 10
#define LR1121_SPI_SCK_PIN 12
#define LR1121_SPI_MOSI_PIN 11
#define LR1121_SPI_MISO_PIN 13
#define LR11X0_DIO3_TCXO_VOLTAGE 3.0
#define LR11X0_DIO_AS_RF_SWITCH
#endif
// Leave undefined to disable our PMU IRQ handler. DO NOT ENABLE THIS because the pmuirq can cause sperious interrupts
// and waking from light sleep
// #define PMU_IRQ 40
@@ -62,6 +76,6 @@
// #define PCF8563_RTC 0x51 //Putting definitions in variant. h does not compile correctly
// has 32768 Hz crystal
#define HAS_32768HZ
#define HAS_32768HZ 1
#define USE_SH1106

5
variants/esp32s3/tlora-pager/platformio.ini
View File

@@ -10,12 +10,11 @@ build_flags = ${esp32s3_base.build_flags}
-I variants/esp32s3/tlora-pager
-D T_LORA_PAGER
-D BOARD_HAS_PSRAM
-D GPS_POWER_TOGGLE
-D HAS_SDCARD
-D SDCARD_USE_SPI1
-D ENABLE_ROTARY_PULLUP
-D ENABLE_BUTTON_PULLUP
-D HALF_STEP
-D ROTARY_BUXTRONICS
lib_deps = ${esp32s3_base.lib_deps}
lovyan03/LovyanGFX@1.2.7
@@ -26,7 +25,7 @@ lib_deps = ${esp32s3_base.lib_deps}
lewisxhe/SensorLib@0.3.1
https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
https://github.com/mverch67/RotaryEncoder/archive/da958a21389cbcd485989705df602a33e092dd88.zip
[env:tlora-pager-tft]
board_level = extra

12
variants/esp32s3/tlora-pager/rfswitch.h
View File

@@ -4,12 +4,8 @@ static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}},
{LR11x0::MODE_RX, {LOW, HIGH}},
{LR11x0::MODE_TX, {HIGH, LOW}},
{LR11x0::MODE_TX_HP, {HIGH, LOW}},
{LR11x0::MODE_TX_HF, {LOW, LOW}},
{LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}},
END_OF_MODE_TABLE,
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {LOW, HIGH}},
{LR11x0::MODE_TX, {HIGH, LOW}}, {LR11x0::MODE_TX_HP, {HIGH, LOW}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

2
variants/esp32s3/tlora-pager/variant.h
View File

@@ -20,6 +20,8 @@
#define SCREEN_ROTATE
#define SCREEN_TRANSITION_FRAMERATE 5
#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
#define USE_TFTDISPLAY 1
#define HAS_PHYSICAL_KEYBOARD 1
#define I2C_SDA SDA
#define I2C_SCL SCL

6
variants/esp32s3/tlora_t3s3_epaper/platformio.ini
View File

@@ -8,13 +8,15 @@ build_flags =
${esp32_base.build_flags}
-D TLORA_T3S3_EPAPER
-I variants/esp32s3/tlora_t3s3_epaper
-DGPS_POWER_TOGGLE
-DUSE_EINK
-DEINK_DISPLAY_MODEL=GxEPD2_213_BN
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
-DEINK_LIMIT_FASTREFRESH=20 ; How many consecutive fast-refreshes are permitted //20
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates //30
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
lib_deps =
${esp32s3_base.lib_deps}

1
variants/esp32s3/tlora_t3s3_v1/platformio.ini
View File

@@ -6,4 +6,3 @@ upload_protocol = esptool
build_flags =
${esp32_base.build_flags} -D TLORA_T3S3_V1 -I variants/esp32s3/tlora_t3s3_v1
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.

1
variants/esp32s3/tracksenger/internal/variant.h
View File

@@ -28,6 +28,7 @@
#define TFT_OFFSET_Y -1
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define USE_TFTDISPLAY 1
#define VEXT_ENABLE 3 // active HIGH, powers the lora antenna boost
#define VEXT_ON_VALUE HIGH

1
variants/esp32s3/tracksenger/lcd/variant.h
View File

@@ -16,6 +16,7 @@
#define ST7789_CS 38
#define ST7789_RS 40
#define ST7789_BL 21
#define USE_TFTDISPLAY 1
// P#define TFT_BL 21 /* V1.1 PCB marking */
#define ST7789_RESET -1

3
variants/esp32s3/tracksenger/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/internal
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
@@ -25,7 +24,6 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/lcd
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
lib_deps =
@@ -42,5 +40,4 @@ build_flags =
${esp32s3_base.build_flags}
-I variants/esp32s3/tracksenger/oled
-D HELTEC_TRACKER_V1_1
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output

1
variants/esp32s3/unphone/variant.h
View File

@@ -36,6 +36,7 @@
#define TFT_INVERT false
#define SCREEN_ROTATE true
#define SCREEN_TRANSITION_FRAMERATE 5
#define USE_TFTDISPLAY 1
#define HAS_TOUCHSCREEN 1
#define USE_XPT2046 1

1
variants/native/portduino-buildroot/platformio.ini
View File

@@ -4,5 +4,6 @@ extends = portduino_base
; environment variable in the buildroot environment.
build_flags = ${portduino_base.build_flags} -O0 -I variants/native/portduino-buildroot
board = buildroot
board_level = extra
lib_deps = ${portduino_base.lib_deps}
build_src_filter = ${portduino_base.build_src_filter}

5
variants/native/portduino-buildroot/variant.h
View File

@@ -1,5 +1,6 @@
#define HAS_SCREEN 1
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE settingsMap[maxtophone]
#define MAX_NUM_NODES settingsMap[maxnodes]
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes

58
variants/native/portduino.ini Normal file
View File

@@ -0,0 +1,58 @@
; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
[portduino_base]
platform =
# renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
framework = arduino
build_src_filter =
${env.build_src_filter}
-<platform/esp32/>
-<nimble/>
-<platform/nrf52/>
-<platform/stm32wl/>
-<platform/rp2xx0>
-<mesh/wifi/>
-<mesh/http/>
+<mesh/raspihttp/>
-<mesh/eth/>
-<modules/esp32>
lib_deps =
${env.lib_deps}
${networking_base.lib_deps}
${radiolib_base.lib_deps}
${environmental_base.lib_deps}
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
# renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
lovyan03/LovyanGFX@^1.2.0
# renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
# renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
adafruit/Adafruit seesaw Library@1.7.9
# renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
build_flags =
${arduino_base.build_flags}
-D ARCH_PORTDUINO
-fPIC
-Isrc/platform/portduino
-DRADIOLIB_EEPROM_UNSUPPORTED
-DPORTDUINO_LINUX_HARDWARE
-DHAS_UDP_MULTICAST=1
-lpthread
-lstdc++fs
-lbluetooth
-lgpiod
-lyaml-cpp
-li2c
-luv
-std=gnu17
-std=c++17
lib_ignore =
Adafruit NeoPixel
Adafruit ST7735 and ST7789 Library
SD

32
variants/native/portduino/platformio.ini
View File

@@ -3,6 +3,7 @@ extends = portduino_base
build_flags = ${portduino_base.build_flags} -I variants/native/portduino
-I /usr/include
board = cross_platform
board_level = extra
lib_deps =
${portduino_base.lib_deps}
melopero/Melopero RV3028@^1.1.0
@@ -16,6 +17,8 @@ extends = native_base
build_flags = ${native_base.build_flags}
!pkg-config --libs libulfius --silence-errors || :
!pkg-config --libs openssl --silence-errors || :
!pkg-config --cflags --libs sdl2 --silence-errors || :
!pkg-config --cflags --libs libbsd-overlay --silence-errors || :
[env:native-tft]
extends = native_base
@@ -40,35 +43,17 @@ build_flags = ${native_base.build_flags} -Os -lX11 -linput -lxkbcommon -ffunctio
-D VIEW_320x240
!pkg-config --libs libulfius --silence-errors || :
!pkg-config --libs openssl --silence-errors || :
!pkg-config --cflags --libs sdl2 --silence-errors || :
!pkg-config --cflags --libs libbsd-overlay --silence-errors || :
build_src_filter =
${native_base.build_src_filter}
[env:native-sdl]
extends = native_base
build_type = release
lib_deps =
${env.lib_deps}
${networking_base.lib_deps}
${radiolib_base.lib_deps}
${environmental_base.lib_deps}
# renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
rweather/Crypto@0.4.0
# renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
# renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
adafruit/Adafruit seesaw Library@1.7.9
https://github.com/jp-bennett/LovyanGFX/archive/7458f84a126c1f8fdc7b038074f71be903f6e4c0.zip
build_flags = ${native_base.build_flags}
!pkg-config --cflags --libs sdl2 --silence-errors || :
-D LGFX_SDL=1
[env:native-fb]
extends = native_base
build_type = release
lib_deps =
${native_base.lib_deps}
${device-ui_base.lib_deps}
board_level = extra
build_flags = ${native_base.build_flags} -Os -ffunction-sections -fdata-sections -Wl,--gc-sections
-D RAM_SIZE=8192
-D USE_FRAMEBUFFER=1
@@ -88,6 +73,7 @@ build_flags = ${native_base.build_flags} -Os -ffunction-sections -fdata-sections
-D MAP_FULL_REDRAW
!pkg-config --libs libulfius --silence-errors || :
!pkg-config --libs openssl --silence-errors || :
!pkg-config --cflags --libs libbsd-overlay --silence-errors || :
build_src_filter =
${native_base.build_src_filter}
@@ -97,7 +83,6 @@ build_type = debug
lib_deps =
${native_base.lib_deps}
${device-ui_base.lib_deps}
board_level = extra
build_flags = ${native_base.build_flags} -O0 -fsanitize=address -lX11 -linput -lxkbcommon
-D DEBUG_HEAP
-D RAM_SIZE=16384
@@ -121,8 +106,13 @@ build_flags = ${native_base.build_flags} -O0 -fsanitize=address -lX11 -linput -l
-D VIEW_320x240
!pkg-config --libs libulfius --silence-errors || :
!pkg-config --libs openssl --silence-errors || :
!pkg-config --cflags --libs libbsd-overlay --silence-errors || :
build_src_filter = ${env:native-tft.build_src_filter}
[env:coverage]
extends = env:native
build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:native.build_flags}
; https://docs.platformio.org/en/latest/projectconf/sections/env/options/test/test_testing_command.html
test_testing_command =
${platformio.build_dir}/${this.__env__}/meshtasticd
-s

7
variants/native/portduino/variant.h
View File

@@ -1,10 +1,11 @@
#ifndef HAS_SCREEN
#define HAS_SCREEN 1
#endif
#define USE_TFTDISPLAY 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#define HAS_GPS 1
#define MAX_RX_TOPHONE settingsMap[maxtophone]
#define MAX_NUM_NODES settingsMap[maxnodes]
#define MAX_RX_TOPHONE portduino_config.maxtophone
#define MAX_NUM_NODES portduino_config.MaxNodes
// RAK12002 RTC Module
#define RV3028_RTC (uint8_t)0b1010010
#define RV3028_RTC (uint8_t)0b1010010

1
variants/nrf52840/ELECROW-ThinkNode-M1/platformio.ini
View File

@@ -9,7 +9,6 @@ debug_tool = jlink
build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/ELECROW-ThinkNode-M1
-DELECROW_ThinkNode_M1
-DGPS_POWER_TOGGLE
-DUSE_EINK
-DEINK_DISPLAY_MODEL=GxEPD2_154_D67
-DEINK_WIDTH=200

20
variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
View File

@@ -62,17 +62,11 @@ extern "C" {
/*
* Buttons
*/
#define PIN_BUTTON2 (32 + 10)
#define PIN_BUTTON1 (32 + 10)
#define PIN_BUTTON2 (32 + 7)
#define ALT_BUTTON_PIN PIN_BUTTON2
#define ALT_BUTTON_ACTIVE_LOW true
#define ALT_BUTTON_ACTIVE_PULLUP true
#define PIN_BUTTON1 (32 + 7)
// #define PIN_BUTTON1 (0 + 11)
// #define PIN_BUTTON1 (32 + 7)
// #define BUTTON_CLICK_MS 400
// #define BUTTON_TOUCH_MS 200
/*
* Analog pins
@@ -157,15 +151,15 @@ External serial flash WP25R1635FZUIL0
#define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
#define GPS_RX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
#define GPS_THREAD_INTERVAL 50
#define PIN_GPS_SWITCH (32 + 1) // GPS开关判断
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_SERIAL1_TX GPS_TX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
@@ -203,4 +197,4 @@ External serial flash WP25R1635FZUIL0
}
#endif
#endif
#endif

17
variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini Normal file
View File

@@ -0,0 +1,17 @@
[env:thinknode_m3]
extends = nrf52840_base
board = ThinkNode-M3
board_check = true
debug_tool = jlink
build_flags =
${nrf52840_base.build_flags}
-Ivariants/nrf52840/ELECROW-ThinkNode-M3
-DELECROW_ThinkNode_M3
-DGPS_POWER_TOGGLE
-D CONFIG_NFCT_PINS_AS_GPIOS=1
-L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M3>
lib_deps =
${nrf52840_base.lib_deps}
khoih-prog/nRF52_PWM@^1.0.1
lewisxhe/PCF8563_Library@^1.0.1

15
variants/nrf52840/ELECROW-ThinkNode-M3/rfswitch.h Normal file
View File

@@ -0,0 +1,15 @@
#include "RadioLib.h"
#include "nrf.h"
// set RF switch configuration for ELECROW ThinkNode M3
// ELECROW ThinkNode M3 uses DIO5 and DIO6 for RF switching
static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};
static const Module::RfSwitchMode_t rfswitch_table[] = {
// mode DIO5 DIO6
{LR11x0::MODE_STBY, {LOW, LOW}}, {LR11x0::MODE_RX, {HIGH, LOW}},
{LR11x0::MODE_TX, {HIGH, HIGH}}, {LR11x0::MODE_TX_HP, {LOW, HIGH}},
{LR11x0::MODE_TX_HF, {LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW}},
{LR11x0::MODE_WIFI, {LOW, LOW}}, END_OF_MODE_TABLE,
};

104
variants/nrf52840/ELECROW-ThinkNode-M3/variant.cpp Normal file
View File

@@ -0,0 +1,104 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "meshUtils.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
pinMode(KEY_POWER, OUTPUT);
digitalWrite(KEY_POWER, HIGH);
pinMode(RGB_POWER, OUTPUT);
digitalWrite(RGB_POWER, HIGH);
pinMode(green_LED_PIN, OUTPUT);
digitalWrite(green_LED_PIN, LED_STATE_OFF);
pinMode(LED_BLUE, OUTPUT);
pinMode(PIN_POWER_USB, INPUT);
pinMode(PIN_POWER_DONE, INPUT);
pinMode(PIN_POWER_CHRG, INPUT);
pinMode(BUTTON_PIN, INPUT_PULLUP);
pinMode(EEPROM_POWER, OUTPUT);
digitalWrite(EEPROM_POWER, HIGH);
pinMode(PIN_EN1, OUTPUT);
digitalWrite(PIN_EN1, HIGH);
pinMode(PIN_EN2, OUTPUT);
digitalWrite(PIN_EN2, HIGH);
pinMode(ACC_POWER, OUTPUT);
digitalWrite(ACC_POWER, LOW);
pinMode(DHT_POWER, OUTPUT);
digitalWrite(DHT_POWER, HIGH);
pinMode(Battery_POWER, OUTPUT);
digitalWrite(Battery_POWER, HIGH);
pinMode(GPS_POWER, OUTPUT);
digitalWrite(GPS_POWER, HIGH);
}
// called from main-nrf52.cpp during the cpuDeepSleep() function
void variant_shutdown()
{
digitalWrite(red_LED_PIN, HIGH);
digitalWrite(green_LED_PIN, HIGH);
digitalWrite(LED_BLUE, HIGH);
digitalWrite(PIN_EN1, LOW);
digitalWrite(PIN_EN2, LOW);
digitalWrite(EEPROM_POWER, LOW);
digitalWrite(KEY_POWER, LOW);
digitalWrite(DHT_POWER, LOW);
digitalWrite(ACC_POWER, LOW);
digitalWrite(Battery_POWER, LOW);
digitalWrite(GPS_POWER, LOW);
// This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
for (int pin = 0; pin < 48; pin++) {
if (pin == PIN_POWER_USB || pin == BUTTON_PIN || pin == PIN_EN1 || pin == PIN_EN2 || pin == DHT_POWER ||
pin == ACC_POWER || pin == Battery_POWER || pin == GPS_POWER || pin == LR1110_SPI_MISO_PIN ||
pin == LR1110_SPI_MOSI_PIN || pin == LR1110_SPI_SCK_PIN || pin == LR1110_SPI_NSS_PIN || pin == LR1110_BUSY_PIN ||
pin == LR1110_NRESET_PIN || pin == LR1110_IRQ_PIN || pin == GPS_TX_PIN || pin == GPS_RX_PIN || pin == green_LED_PIN ||
pin == red_LED_PIN || pin == LED_BLUE) {
continue;
}
pinMode(pin, OUTPUT);
digitalWrite(pin, LOW);
if (pin >= 32) {
NRF_P1->DIRCLR = (1 << (pin - 32));
} else {
NRF_GPIO->DIRCLR = (1 << pin);
}
}
nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(BUTTON_PIN, sense1);
nrf_gpio_cfg_input(PIN_POWER_USB, NRF_GPIO_PIN_PULLDOWN); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense2 = NRF_GPIO_PIN_SENSE_HIGH;
nrf_gpio_cfg_sense_set(PIN_POWER_USB, sense2);
}

123
variants/nrf52840/ELECROW-ThinkNode-M3/variant.h Normal file
View File

@@ -0,0 +1,123 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_ELECROW_EINK_V1_0_
#define _VARIANT_ELECROW_EINK_V1_0_
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#include "WVariant.h"
#define VARIANT_MCK (64000000ul)
#define USE_LFXO // Board uses 32khz crystal for LF
#define ELECROW_ThinkNode_M3 1
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// Power Pin
#define NRF_APM
#define GPS_POWER 14
#define PIN_POWER_USB 31
#define EXT_PWR_DETECT PIN_POWER_USB
#define PIN_POWER_DONE 24
#define PIN_POWER_CHRG 32
#define KEY_POWER 16
#define ACC_POWER 2
#define DHT_POWER 3
#define Battery_POWER 17
#define RGB_POWER 29
#define EEPROM_POWER 7
// LED
#define red_LED_PIN 33
#define LED_POWER red_LED_PIN
#define LED_CHARGE LED_POWER // Signals the Status LED Module to handle this LED
#define green_LED_PIN 35
#define PIN_LED2 green_LED_PIN
#define LED_BLUE 37
#define LED_PAIRING LED_BLUE // Signals the Status LED Module to handle this LED
#define LED_BUILTIN -1
#define LED_STATE_ON LOW
#define LED_STATE_OFF HIGH
// BUZZER
#define PIN_BUZZER 23
#define PIN_EN1 36
#define PIN_EN2 34
/*Wire Interfaces*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA 26
#define PIN_WIRE_SCL 27
// Temperature correction for sensor
#define AHT10_TEMP_OFFSET -5.0
/*GPS pins*/
#define HAS_GPS 1
#define GPS_BAUDRATE 9600
#define PIN_GPS_RESET 25
#define PIN_GPS_STANDBY 21
#define GPS_TX_PIN 22
#define GPS_RX_PIN 20
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_TX GPS_TX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
// Button
#define BUTTON_PIN 12
#define BUTTON_PIN_ALT (0 + 12)
// Battery
#define BATTERY_PIN 5
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 2.4
#define VBAT_AR_INTERNAL AR_INTERNAL_2_4
#define ADC_MULTIPLIER (1.75)
/*SPI Interfaces*/
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (32 + 15) // P1.15 47
#define PIN_SPI_MOSI (32 + 14) // P1.14 46
#define PIN_SPI_SCK (32 + 13) // P1.13 45
#define PIN_SPI_NSS (32 + 12) // P1.12 44
/*LORA Interfaces*/
#define USE_LR1110
#define LR1110_IRQ_PIN 40
#define LR1110_NRESET_PIN 42
#define LR1110_BUSY_PIN 43
#define LR1110_SPI_NSS_PIN 44
#define LR1110_SPI_SCK_PIN 45
#define LR1110_SPI_MOSI_PIN 46
#define LR1110_SPI_MISO_PIN 47
#define LR11X0_DIO3_TCXO_VOLTAGE 3.3
#define LR11X0_DIO_AS_RF_SWITCH
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
#ifdef __cplusplus
}
#endif
#endif

15
variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini Normal file
View File

@@ -0,0 +1,15 @@
; ThinkNode M6 - Outdoor Solar Power nrf52840/sx1262 device
[env:thinknode_m6]
extends = nrf52840_base
board = ThinkNode-M6
board_check = true
debug_tool = jlink
build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/ELECROW-ThinkNode-M6
-DELECROW_ThinkNode_M6
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW-ThinkNode-M6>
lib_deps =
${nrf52840_base.lib_deps}
lewisxhe/PCF8563_Library@^1.0.1

70
variants/nrf52840/ELECROW-ThinkNode-M6/variant.cpp Normal file
View File

@@ -0,0 +1,70 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0 - pins 0 and 1 are hardwired for xtal and should never be enabled
0xff, 0xff, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
pinMode(LED_CHARGE, OUTPUT);
ledOff(LED_CHARGE);
pinMode(LED_PAIRING, OUTPUT);
ledOff(LED_PAIRING);
pinMode(VDD_FLASH_EN, OUTPUT);
digitalWrite(VDD_FLASH_EN, HIGH);
}
// called from main-nrf52.cpp during the cpuDeepSleep() function
void variant_shutdown()
{
// This sets the pin to OUTPUT and LOW for the pins *not* in the if block.
for (int pin = 0; pin < 48; pin++) {
if (pin == PIN_GPS_EN || pin == ADC_CTRL || pin == PIN_BUTTON1 || pin == PIN_SPI_MISO || pin == PIN_SPI_MOSI ||
pin == PIN_SPI_SCK) {
continue;
}
pinMode(pin, OUTPUT);
digitalWrite(pin, LOW);
if (pin >= 32) {
NRF_P1->DIRCLR = (1 << (pin - 32));
} else {
NRF_GPIO->DIRCLR = (1 << pin);
}
}
digitalWrite(PIN_GPS_EN, LOW);
digitalWrite(ADC_CTRL, LOW);
// digitalWrite(RTC_POWER, LOW);
nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense1);
}

146
variants/nrf52840/ELECROW-ThinkNode-M6/variant.h Normal file
View File

@@ -0,0 +1,146 @@
/*
Copyright (c) 2014-2015 Arduino LLC. All right reserved.
Copyright (c) 2016 Sandeep Mistry All right reserved.
Copyright (c) 2018, Adafruit Industries (adafruit.com)
This library is free software; you can redistribute it and/or
modify it under the terms of the GNU Lesser General Public
License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version.
This library is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the GNU Lesser General Public License for more details.
You should have received a copy of the GNU Lesser General Public
License along with this library; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef _VARIANT_ELECROW_THINKNODE_M6_
#define _VARIANT_ELECROW_THINKNODE_M6_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
#define USE_LFXO
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// LEDs
#define LED_BUILTIN -1
#define LED_BLUE -1
#define LED_CHARGE (12)
#define LED_PAIRING (7)
#define PIN_LED2 LED_PAIRING
#define LED_STATE_ON HIGH
#define LED_STATE_OFF LOW
// USB power detection
#define EXT_PWR_DETECT (13)
// Button
#define PIN_BUTTON1 (17)
// Battery ADC
#define PIN_A0 (28)
#define BATTERY_PIN PIN_A0
#define ADC_CTRL (11)
#define ADC_CTRL_ENABLED 1
static const uint8_t A0 = PIN_A0;
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_SAMPLES 30
#define PIN_NFC1 (9)
#define PIN_NFC2 (10)
// I2C
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 9)
#define PIN_WIRE_SCL (8)
// Peripheral power enable
#define PIN_POWER_EN (27)
// Solar charger status
#define EXT_CHRG_DETECT (15)
#define EXT_CHRG_DETECT_VALUE LOW
// QSPI Flash
#define PIN_QSPI_SCK (32 + 3)
#define PIN_QSPI_CS (23)
#define PIN_QSPI_IO0 (32 + 1)
#define PIN_QSPI_IO1 (32 + 2)
#define PIN_QSPI_IO2 (32 + 4)
#define PIN_QSPI_IO3 (32 + 5)
#define EXTERNAL_FLASH_DEVICES MX25R1635F
#define EXTERNAL_FLASH_USE_QSPI
#define VDD_FLASH_EN (21)
// LoRa SX1262
#define USE_SX1262
#define SX126X_CS (32 + 12)
#define SX126X_DIO1 (32 + 6)
#define SX126X_BUSY (32 + 11)
#define SX126X_RESET (32 + 10)
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 3.3
// GPS L76K
#define GPS_L76K
#define GPS_BAUDRATE 9600
#define PIN_GPS_EN (6)
#define PIN_GPS_REINIT (29)
#define PIN_GPS_STANDBY (30)
#define PIN_GPS_PPS (31)
#define GPS_TX_PIN (2)
#define GPS_RX_PIN (3)
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_TX GPS_TX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
// Secondary UART
#define PIN_SERIAL2_RX (22)
#define PIN_SERIAL2_TX (24)
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
// SPI
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (32 + 15)
#define PIN_SPI_MOSI (32 + 14)
#define PIN_SPI_SCK (32 + 13)
// Battery
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (1.75F)
#define HAS_SOLAR
#ifdef __cplusplus
}
#endif
#endif

1
variants/nrf52840/ME25LS01-4Y10TD/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags = ${nrf52840_base.build_flags}
-Isrc/platform/nrf52/softdevice
-Isrc/platform/nrf52/softdevice/nrf52
-DME25LS01_4Y10TD
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS01-4Y10TD>
lib_deps =

1
variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
View File

@@ -8,7 +8,6 @@ build_flags = ${nrf52840_base.build_flags}
-Isrc/platform/nrf52/softdevice
-Isrc/platform/nrf52/softdevice/nrf52
-DME25LS01_4Y10TD
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DEINK_DISPLAY_MODEL=GxEPD2_420_GDEY042T81
-DEINK_WIDTH=400
-DEINK_HEIGHT=300

1
variants/nrf52840/MS24SF1/platformio.ini
View File

@@ -7,7 +7,6 @@ build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/MS24SF1
-Isrc/platform/nrf52/softdevice
-Isrc/platform/nrf52/softdevice/nrf52
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/MS24SF1>
lib_deps =

8
variants/nrf52840/canaryone/variant.h
View File

@@ -128,13 +128,13 @@ static const uint8_t A0 = PIN_A0;
// #define PIN_GPS_WAKE (GPIO_PORT1 + 2) // An output to wake GPS, low means allow sleep, high means force wake
// Seems to be missing on this new board
#define PIN_GPS_PPS (GPIO_PORT1 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN (GPIO_PORT1 + 9) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (GPIO_PORT1 + 8) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (GPIO_PORT1 + 8) // This is for bits going TOWARDS the GPS
#define GPS_RX_PIN (GPIO_PORT1 + 9) // This is for bits going TOWARDS the CPU
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
#define PIN_SERIAL1_TX GPS_TX_PIN
#define GPS_RESET_PIN (GPIO_PORT1 + 5) // GPS reset pin

208
variants/nrf52840/cpp_overrides/lfs_util.h Normal file
View File

@@ -0,0 +1,208 @@
/*
* lfs utility functions
*
* Copyright (c) 2017, Arm Limited. All rights reserved.
* SPDX-License-Identifier: BSD-3-Clause
*/
// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib. And we use a special -include in
// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
// this is a copy from is almost exactly
// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
#ifndef LFS_UTIL_H
#define LFS_UTIL_H
// Users can override lfs_util.h with their own configuration by defining
// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
//
// If LFS_CONFIG is used, none of the default utils will be emitted and must be
// provided by the config file. To start I would suggest copying lfs_util.h and
// modifying as needed.
#ifdef LFS_CONFIG
#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
#define LFS_STRINGIZE2(x) #x
#include LFS_STRINGIZE(LFS_CONFIG)
#else
// System includes
#include <stdbool.h>
#include <stdint.h>
#include <string.h>
#ifndef LFS_NO_MALLOC
#include <stdlib.h>
#endif
#ifndef LFS_NO_ASSERT
#include <assert.h>
#endif
#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
#include <stdio.h>
#endif
#ifdef __cplusplus
extern "C" {
#endif
// Macros, may be replaced by system specific wrappers. Arguments to these
// macros must not have side-effects as the macros can be removed for a smaller
// code footprint
// Logging functions
#ifndef LFS_NO_DEBUG
void logLegacy(const char *level, const char *fmt, ...);
#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
#else
#define LFS_DEBUG(fmt, ...)
#endif
#ifndef LFS_NO_WARN
#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
#else
#define LFS_WARN(fmt, ...)
#endif
#ifndef LFS_NO_ERROR
#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
#else
#define LFS_ERROR(fmt, ...)
#endif
// Runtime assertions
#ifndef LFS_NO_ASSERT
#define LFS_ASSERT(test) assert(test)
#else
extern void lfs_assert(const char *reason);
#define LFS_ASSERT(test) \
if (!(test)) \
lfs_assert(#test)
#endif
// Builtin functions, these may be replaced by more efficient
// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
// expensive basic C implementation for debugging purposes
// Min/max functions for unsigned 32-bit numbers
static inline uint32_t lfs_max(uint32_t a, uint32_t b)
{
return (a > b) ? a : b;
}
static inline uint32_t lfs_min(uint32_t a, uint32_t b)
{
return (a < b) ? a : b;
}
// Find the next smallest power of 2 less than or equal to a
static inline uint32_t lfs_npw2(uint32_t a)
{
#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
return 32 - __builtin_clz(a - 1);
#else
uint32_t r = 0;
uint32_t s;
a -= 1;
s = (a > 0xffff) << 4;
a >>= s;
r |= s;
s = (a > 0xff) << 3;
a >>= s;
r |= s;
s = (a > 0xf) << 2;
a >>= s;
r |= s;
s = (a > 0x3) << 1;
a >>= s;
r |= s;
return (r | (a >> 1)) + 1;
#endif
}
// Count the number of trailing binary zeros in a
// lfs_ctz(0) may be undefined
static inline uint32_t lfs_ctz(uint32_t a)
{
#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
return __builtin_ctz(a);
#else
return lfs_npw2((a & -a) + 1) - 1;
#endif
}
// Count the number of binary ones in a
static inline uint32_t lfs_popc(uint32_t a)
{
#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
return __builtin_popcount(a);
#else
a = a - ((a >> 1) & 0x55555555);
a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
#endif
}
// Find the sequence comparison of a and b, this is the distance
// between a and b ignoring overflow
static inline int lfs_scmp(uint32_t a, uint32_t b)
{
return (int)(unsigned)(a - b);
}
// Convert from 32-bit little-endian to native order
static inline uint32_t lfs_fromle32(uint32_t a)
{
#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) || \
(defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) || \
(defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
return a;
#elif !defined(LFS_NO_INTRINSICS) && \
((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
(defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
return __builtin_bswap32(a);
#else
return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
#endif
}
// Convert to 32-bit little-endian from native order
static inline uint32_t lfs_tole32(uint32_t a)
{
return lfs_fromle32(a);
}
// Calculate CRC-32 with polynomial = 0x04c11db7
void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
// Allocate memory, only used if buffers are not provided to littlefs
static inline void *lfs_malloc(size_t size)
{
#ifndef LFS_NO_MALLOC
extern void *pvPortMalloc(size_t xWantedSize);
return pvPortMalloc(size);
#else
(void)size;
return NULL;
#endif
}
// Deallocate memory, only used if buffers are not provided to littlefs
static inline void lfs_free(void *p)
{
#ifndef LFS_NO_MALLOC
extern void vPortFree(void *pv);
vPortFree(p);
#else
(void)p;
#endif
}
#ifdef __cplusplus
} /* extern "C" */
#endif
#endif
#endif

9836
variants/nrf52840/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-Micro_Pinouts 2024-12-14.pdf
View File

File diff suppressed because it is too large Load Diff

34152
variants/nrf52840/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-micro_Pinouts_2025-12-04.pdf Normal file
View File

File diff suppressed because it is too large Load Diff

17
variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
View File

@@ -2,9 +2,13 @@
# Notes
News 2025-12-04 - The GPS pin definitions have been changed!!! This has no material effect on current builds, but future builders may wish to review how they are using the wires.
## General
The pinout is contained in the variant.h file, and a [generic schematic](./Schematic_Pro-Micro_Pinouts%202024-12-14.pdf) is located in this directory.
The pinout is contained in the variant.h file, and a [generic schematic](./Schematic_Pro-Micro_Pinouts_2025-12-04.pdf) is located in this directory.
This variant is suitable for both TCXO and XTAL types of modules. The old XTAL variant has been removed to reduce confusion.
### Note on DIO2, RXEN, TXEN, and RF switching
@@ -17,9 +21,13 @@ Several modules require external switching between transmit (Tx) and receive (Rx
RXEN is not required to be connected if the selected module already has internal RF switching, or if external RF switching logic is already applied.
Also worth noting that the Seeed WIO SX1262 in particular only has RXEN exposed (marked RF_SW) and has the DIO2-TXEN link internally.
## Making a node based on this variant
Making your own node based on this design is straightforward. There are various open source and free to use PCB design files available, or you can solder wires directly from a module to the pro-micro.
<details>
<summary> The table of known modules is at the bottom of the variant.h, and reproduced here for convenience. </summary>
<summary> < Click to expand > The table of known modules is at the bottom of the variant.h, and reproduced here for convenience. </summary>
| Mfr | Module | TCXO | RF Switch | Notes |
| ------------ | ---------------- | ---- | --------- | ------------------------------------- |
@@ -34,6 +42,7 @@ Also worth noting that the Seeed WIO SX1262 in particular only has RXEN exposed
| Waveshare | Core1262-HF | yes | Ext | |
| Waveshare | LoRa Node Module | yes | Int | |
| Seeed | Wio-SX1262 | yes | Ext | Cute! DIO2/TXEN are not exposed |
| Seeed | Wio-LR1121 | yes | Int | LR1121, needs alternate rfswitch.h |
| AI-Thinker | RA-02 | No | Int | SX1278 **433mhz band only** |
| RF Solutions | RFM95 | No | Int | Untested |
| Ebyte | E80-900M2213S | Yes | Int | LR1121 radio |
@@ -72,6 +81,10 @@ The Semtech default, the values are (taken from [here](https://github.com/Lora-n
<details>
<summary> < Click to expand >
</summary>
```cpp
.rfswitch = {
.enable = LR11XX_SYSTEM_RFSW0_HIGH | LR11XX_SYSTEM_RFSW1_HIGH | LR11XX_SYSTEM_RFSW2_HIGH,

14
variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h
View File

@@ -30,8 +30,8 @@ NRF52 PRO MICRO PIN ASSIGNMENT
| Gnd   |             |   | reset   |             | |
| Gnd   |             |   | ext_vcc | *see 0.13   | |
| P0.17 | RXEN       |   | P0.31   | BATTERY_PIN | |
| P0.20 | GPS_RX     |   | P0.29   | BUSY         | DIO0 |
| P0.22 | GPS_TX     |   | P0.02   | MISO | MISO |
| P0.20 | GPS_TX     |   | P0.29   | BUSY         | DIO0 |
| P0.22 | GPS_RX     |   | P0.02   | MISO | MISO |
| P0.24 | GPS_EN     |   | P1.15   | MOSI         | MOSI |
| P1.00 | BUTTON_PIN |   | P1.13   | CS           | CS   |
| P0.11 | SCL         |   | P1.11   | SCK         | SCK |
@@ -90,17 +90,16 @@ NRF52 PRO MICRO PIN ASSIGNMENT
#define BUTTON_PIN (32 + 0) // P1.00
// GPS
#define PIN_GPS_TX (0 + 22) // P0.22
#define PIN_GPS_RX (0 + 20) // P0.20
#define GPS_TX_PIN (0 + 20) // P0.20 - This is data from the MCU
#define GPS_RX_PIN (0 + 22) // P0.22 - This is data from the GNSS
#define PIN_GPS_EN (0 + 24) // P0.24
#define GPS_POWER_TOGGLE
#define GPS_UBLOX
// define GPS_DEBUG
// UART interfaces
#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL1_TX GPS_TX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
#define PIN_SERIAL2_RX (0 + 6) // P0.06
#define PIN_SERIAL2_TX (0 + 8) // P0.08
@@ -176,6 +175,7 @@ settings.
| Waveshare | Core1262-HF | yes | Ext | |
| Waveshare | LoRa Node Module | yes | Int | |
| Seeed | Wio-SX1262 | yes | Ext | Cute! DIO2/TXEN are not exposed |
| Seeed | Wio-LR1121 | yes | Int | LR1121, needs alternate rfswitch.h |
| AI-Thinker | RA-02 | No | Int | SX1278 **433mhz band only** |
| RF Solutions | RFM95 | No | Int | Untested |
| Ebyte | E80-900M2213S | Yes | Int | LR1121 radio |

12
variants/nrf52840/diy/nrf52_promicro_diy_xtal/platformio.ini
View File

@@ -1,12 +0,0 @@
; Promicro + E22(0)-xxxMM / RA-01SH modules board variant - DIY - without TCXO
[env:nrf52_promicro_diy_xtal]
extends = nrf52840_base
board = promicro-nrf52840
board_level = extra
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/diy/nrf52_promicro_diy_xtal
-D NRF52_PROMICRO_DIY
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_xtal>
lib_deps =
${nrf52840_base.lib_deps}
debug_tool = jlink

155
variants/nrf52840/diy/nrf52_promicro_diy_xtal/variant.h
View File

@@ -1,155 +0,0 @@
#ifndef _VARIANT_PROMICRO_DIY_
#define _VARIANT_PROMICRO_DIY_
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
#define PROMICRO_DIY_XTAL
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
/*
NRF52 PRO MICRO PIN ASSIGNMENT
| Pin | Function | | Pin | Function |
|-------|------------|---|---------|-------------|
| Gnd | | | vbat | |
| P0.06 | Serial2 RX | | vbat | |
| P0.08 | Serial2 TX | | Gnd | |
| Gnd | | | reset | |
| Gnd | | | ext_vcc | *see 0.13 |
| P0.17 | RXEN | | P0.31 | BATTERY_PIN |
| P0.20 | GPS_RX | | P0.29 | BUSY |
| P0.22 | GPS_TX | | P0.02 | MISO |
| P0.24 | GPS_EN | | P1.15 | MOSI |
| P1.00 | BUTTON_PIN | | P1.13 | CS |
| P0.11 | SCL | | P1.11 | SCK |
| P1.04 | SDA | | P0.10 | DIO1/IRQ |
| P1.06 | Free pin | | P0.09 | RESET |
| | | | | |
| | Mid board | | | Internal |
| P1.01 | Free pin | | 0.15 | LED |
| P1.02 | Free pin | | 0.13 | 3V3_EN |
| P1.07 | Free pin | | | |
*/
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
// Pin 13 enables 3.3V periphery. If the Lora module is on this pin, then it should stay enabled at all times.
#define PIN_3V3_EN (0 + 13) // P0.13
// Analog pins
#define BATTERY_PIN (0 + 31) // P0.31 Battery ADC
#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
#define ADC_RESOLUTION 14
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
// Definition of milliVolt per LSB => 3.0V ADC range and 12-bit ADC resolution = 3000mV/4096
#define VBAT_MV_PER_LSB (0.73242188F)
// Voltage divider value => 1.5M + 1M voltage divider on VBAT = (1.5M / (1M + 1.5M))
#define VBAT_DIVIDER (0.6F)
// Compensation factor for the VBAT divider
#define VBAT_DIVIDER_COMP (1.73)
// Fixed calculation of milliVolt from compensation value
#define REAL_VBAT_MV_PER_LSB (VBAT_DIVIDER_COMP * VBAT_MV_PER_LSB)
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER VBAT_DIVIDER_COMP // REAL_VBAT_MV_PER_LSB
#define VBAT_RAW_TO_SCALED(x) (REAL_VBAT_MV_PER_LSB * x)
// WIRE IC AND IIC PINS
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (32 + 4) // P1.04
#define PIN_WIRE_SCL (0 + 11) // P0.11
// LED
#define PIN_LED1 (0 + 15) // P0.15
#define LED_BUILTIN PIN_LED1
// Actually red
#define LED_BLUE PIN_LED1
#define LED_STATE_ON 1 // State when LED is lit
// Button
#define BUTTON_PIN (32 + 0) // P1.00
// GPS
#define PIN_GPS_TX (0 + 22) // P0.22
#define PIN_GPS_RX (0 + 20) // P0.20
#define PIN_GPS_EN (0 + 24) // P0.24
#define GPS_POWER_TOGGLE
#define GPS_UBLOX
// define GPS_DEBUG
// UART interfaces
#define PIN_SERIAL1_RX PIN_GPS_TX
#define PIN_SERIAL1_TX PIN_GPS_RX
#define PIN_SERIAL2_RX (0 + 6) // P0.06
#define PIN_SERIAL2_TX (0 + 8) // P0.08
// Serial interfaces
#define SPI_INTERFACES_COUNT 1
#define PIN_SPI_MISO (0 + 2) // P0.02
#define PIN_SPI_MOSI (32 + 15) // P1.15
#define PIN_SPI_SCK (32 + 11) // P1.11
// LORA MODULES
#define USE_LLCC68
#define USE_SX1262
// #define USE_RF95
#define USE_SX1268
// LORA CONFIG
#define SX126X_CS (32 + 13) // P1.13 FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 (0 + 10) // P0.10 IRQ
#define SX126X_DIO2_AS_RF_SWITCH // Note for E22 modules: DIO2 is not attached internally to TXEN for automatic TX/RX switching,
// so it needs connecting externally if it is used in this way
#define SX126X_BUSY (0 + 29) // P0.29
#define SX126X_RESET (0 + 9) // P0.09
#define SX126X_RXEN (0 + 17) // P0.17
#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
/*
On the SX1262, DIO3 sets the voltage for an external TCXO, if one is present. If one is not present, then this should not be used.
Ebyte
e22-900mm22s has no TCXO
e22-900m22s has TCXO
e220-900mm22s has no TCXO, works with/without this definition, looks like DIO3 not connected at all
AI-thinker
RA-01SH does not have TCXO
Waveshare
Core1262 has TCXO
*/
// #define SX126X_DIO3_TCXO_VOLTAGE 1.8
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

4
variants/nrf52840/gat562_mesh_trial_tracker/platformio.ini
View File

@@ -6,8 +6,8 @@ board = gat562_mesh_trial_tracker
board_check = true
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/gat562_mesh_trial_tracker
-D GAT562_MESH_TRIAL_TRACKER
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
;-D GAT562_MESH_TRIAL_TRACKER
-D PRIVATE_HW
-DRADIOLIB_EXCLUDE_SX128X=1
-DRADIOLIB_EXCLUDE_SX127X=1
-DRADIOLIB_EXCLUDE_LR11X0=1

8
variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h
View File

@@ -116,13 +116,13 @@ No longer populated on PCB
#define PIN_GPS_PPS (32 + 4)
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
#define PIN_SERIAL1_TX GPS_TX_PIN
// PCF8563 RTC Module
#define PCF8563_RTC 0x51

1
variants/nrf52840/heltec_mesh_node_t114/platformio.ini
View File

@@ -8,7 +8,6 @@ debug_tool = jlink
# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/heltec_mesh_node_t114
-DGPS_POWER_TOGGLE
-DHELTEC_T114
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_node_t114>

19
variants/nrf52840/heltec_mesh_node_t114/variant.h
View File

@@ -167,13 +167,13 @@ No longer populated on PCB
#define PIN_GPS_PPS (32 + 4)
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
#define PIN_SERIAL1_TX GPS_TX_PIN
// PCF8563 RTC Module
#define PCF8563_RTC 0x51
@@ -210,6 +210,17 @@ No longer populated on PCB
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (4.916F)
// rf52840 AIN2 = Pin 4
// commented out due to power leakage of 2.9mA in shutdown state see reported issue #8801
// #define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_2 //UNSAFE
// We have AIN2 with a VBAT divider so AIN2 = VBAT * (100/490)
// We have the device going deep sleep under 3.1V, which is AIN2 = 0.63V
// So we can wake up when VBAT>=VDD is restored to 3.3V, where AIN2 = 0.67V
// Ratio 0.67/3.3 = 0.20, so we can pick a bit higher, 2/8 VDD, which means
// VBAT=4.04V
#define BATTERY_LPCOMP_THRESHOLD NRF_LPCOMP_REF_SUPPLY_2_8
#define HAS_RTC 0
#ifdef __cplusplus
}

10
variants/nrf52840/heltec_mesh_pocket/variant.h
View File

@@ -120,7 +120,13 @@ No longer populated on PCB
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER (4.90F)
#define ADC_MULTIPLIER (4.6425F)
#if defined(HELTEC_MESH_POCKET_BATTERY_5000)
#define OCV_ARRAY 4300, 4240, 4120, 4000, 3888, 3800, 3740, 3698, 3655, 3580, 3400
#elif defined(HELTEC_MESH_POCKET_BATTERY_10000)
#define OCV_ARRAY 4100, 4060, 3960, 3840, 3729, 3625, 3550, 3500, 3420, 3345, 3100
#endif
#undef HAS_GPS
#define HAS_GPS 0
@@ -129,4 +135,4 @@ No longer populated on PCB
}
#endif
#endif
#endif

90
variants/nrf52840/heltec_mesh_solar/nicheGraphics.h Normal file
View File

@@ -0,0 +1,90 @@
#pragma once
#include "configuration.h"
#ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
// InkHUD-specific components
// ---------------------------
#include "graphics/niche/InkHUD/InkHUD.h"
// Applets
#include "graphics/niche/InkHUD/Applets/User/AllMessage/AllMessageApplet.h"
#include "graphics/niche/InkHUD/Applets/User/DM/DMApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Heard/HeardApplet.h"
#include "graphics/niche/InkHUD/Applets/User/Positions/PositionsApplet.h"
#include "graphics/niche/InkHUD/Applets/User/RecentsList/RecentsListApplet.h"
#include "graphics/niche/InkHUD/Applets/User/ThreadedMessage/ThreadedMessageApplet.h"
// Shared NicheGraphics components
// --------------------------------
#include "graphics/niche/Drivers/EInk/E0213A367.h"
#include "graphics/niche/Inputs/TwoButton.h"
void setupNicheGraphics()
{
using namespace NicheGraphics;
// SPI
// -----------------------------
// For NRF52 platforms, SPI pins are defined in variant.h
SPI1.begin();
// E-Ink Driver
// -----------------------------
Drivers::EInk *driver = new Drivers::E0213A367;
driver->begin(&SPI1, PIN_EINK_DC, PIN_EINK_CS, PIN_EINK_BUSY, PIN_EINK_RES);
// InkHUD
// ----------------------------
InkHUD::InkHUD *inkhud = InkHUD::InkHUD::getInstance();
// Set the E-Ink driver
inkhud->setDriver(driver);
// Set how many FAST updates per FULL update
// Set how unhealthy additional FAST updates beyond this number are
inkhud->setDisplayResilience(10, 1.5);
// Select fonts
InkHUD::Applet::fontLarge = FREESANS_12PT_WIN1252;
InkHUD::Applet::fontMedium = FREESANS_9PT_WIN1252;
InkHUD::Applet::fontSmall = FREESANS_6PT_WIN1252;
// Customize default settings
inkhud->persistence->settings.userTiles.maxCount = 2; // How many tiles can the display handle?
inkhud->persistence->settings.rotation = 3; // 270 degrees clockwise
inkhud->persistence->settings.userTiles.count = 1; // One tile only by default, keep things simple for new users
inkhud->persistence->settings.optionalMenuItems.nextTile = true;
// Pick applets
// Note: order of applets determines priority of "auto-show" feature
inkhud->addApplet("All Messages", new InkHUD::AllMessageApplet, true, true); // Activated, autoshown
inkhud->addApplet("DMs", new InkHUD::DMApplet); // -
inkhud->addApplet("Channel 0", new InkHUD::ThreadedMessageApplet(0)); // -
inkhud->addApplet("Channel 1", new InkHUD::ThreadedMessageApplet(1)); // -
inkhud->addApplet("Positions", new InkHUD::PositionsApplet, true); // Activated
inkhud->addApplet("Recents List", new InkHUD::RecentsListApplet); // -
inkhud->addApplet("Heard", new InkHUD::HeardApplet, true, false, 0); // Activated, no autoshow, default on tile 0
// Start running InkHUD
inkhud->begin();
// Buttons
// --------------------------
Inputs::TwoButton *buttons = Inputs::TwoButton::getInstance(); // Shared NicheGraphics component
// #0: Main User Button
buttons->setWiring(0, Inputs::TwoButton::getUserButtonPin());
buttons->setHandlerShortPress(0, [inkhud]() { inkhud->shortpress(); });
buttons->setHandlerLongPress(0, [inkhud]() { inkhud->longpress(); });
// Begin handling button events
buttons->start();
}
#endif

100
variants/nrf52840/heltec_mesh_solar/platformio.ini
View File

@@ -1,5 +1,5 @@
; First prototype nrf52840/sx1262 device
[env:heltec-mesh-solar]
[heltec_mesh_solar_base]
extends = nrf52840_base
board = heltec_mesh_solar
board_level = pr
@@ -8,7 +8,6 @@ debug_tool = jlink
# add -DCFG_SYSVIEW if you want to use the Segger systemview tool for OS profiling.
build_flags = ${nrf52840_base.build_flags}
-Ivariants/nrf52840/heltec_mesh_solar
-DGPS_POWER_TOGGLE
-DHELTEC_MESH_SOLAR
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/heltec_mesh_solar>
@@ -17,3 +16,100 @@ lib_deps =
https://github.com/NMIoT/meshsolar/archive/dfc5330dad443982e6cdd37a61d33fc7252f468b.zip
lewisxhe/PCF8563_Library@^1.0.1
ArduinoJson@6.21.4
[env:heltec-mesh-solar]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DSPI_INTERFACES_COUNT=1
[env:heltec-mesh-solar-eink]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_EINK
-DSPI_INTERFACES_COUNT=2
-DUSE_EINK
-DPIN_SCREEN_VDD_CTL=3
-DPIN_EINK_CS=41
-DPIN_EINK_BUSY=11
-DPIN_EINK_DC=13
-DPIN_EINK_RES=40
-DPIN_EINK_SCLK=12
-DPIN_EINK_MOSI=2
-DPIN_SPI1_MISO=-1
-DPIN_SPI1_MOSI=PIN_EINK_MOSI
-DPIN_SPI1_SCK=PIN_EINK_SCLK
-DEINK_DISPLAY_MODEL=GxEPD2_213_E0213A367
-DEINK_WIDTH=250
-DEINK_HEIGHT=122
-DUSE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-DEINK_LIMIT_FASTREFRESH=10 ; How many consecutive fast-refreshes are permitted
-DEINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates
-DEINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-DEINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-DEINK_HASQUIRK_GHOSTING ; Display model is identified as "prone to ghosting"
lib_deps =
${heltec_mesh_solar_base.lib_deps}
https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
[env:heltec-mesh-solar-inkhud]
extends = heltec_mesh_solar_base, inkhud
build_src_filter = ${heltec_mesh_solar_base.build_src_filter} ${inkhud.build_src_filter}
build_flags = ${heltec_mesh_solar_base.build_flags}
${inkhud.build_flags}
-DHELTEC_MESH_SOLAR_INKHUD
-DSPI_INTERFACES_COUNT=2
-DPIN_SCREEN_VDD_CTL=3
-DPIN_EINK_CS=41
-DPIN_EINK_BUSY=11
-DPIN_EINK_DC=13
-DPIN_EINK_RES=40
-DPIN_EINK_SCLK=12
-DPIN_EINK_MOSI=2
-DPIN_SPI1_MISO=-1
-DPIN_SPI1_MOSI=PIN_EINK_MOSI
-DPIN_SPI1_SCK=PIN_EINK_SCLK
lib_deps =
${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
${heltec_mesh_solar_base.lib_deps}
[env:heltec-mesh-solar-oled]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_OLED
-DSPI_INTERFACES_COUNT=1
-DPIN_SCREEN_VDD_CTL=3
-DHAS_SCREEN=1
-DRESET_OLED=40
-DPIN_WIRE_SDA=2
-DPIN_WIRE_SCL=12
[env:heltec-mesh-solar-tft]
extends = heltec_mesh_solar_base
build_flags = ${heltec_mesh_solar_base.build_flags}
-DHELTEC_MESH_SOLAR_TFT
-DSPI_INTERFACES_COUNT=2
-DUSE_ST7789
-DST7789_NSS=41
-DST7789_RS=13
-DST7789_SDA=2
-DST7789_SCK=12
-DST7789_RESET=40
-DST7789_MISO=-1
-DST7789_BUSY=-1
-DVTFT_CTRL=3
-DVTFT_LEDA=11
-DTFT_BACKLIGHT_ON=HIGH
-DST7789_SPI_HOST=SPI2_HOST
-DSPI_FREQUENCY=10000000
-DSPI_READ_FREQUENCY=10000000
-DTFT_HEIGHT=170
-DTFT_WIDTH=320
-DTFT_OFFSET_X=0
-DTFT_OFFSET_Y=0
-DBRIGHTNESS_DEFAULT=100
-DPIN_SPI1_MISO=ST7789_MISO
-DPIN_SPI1_MOSI=ST7789_SDA
-DPIN_SPI1_SCK=ST7789_SCK
lib_deps =
${heltec_mesh_solar_base.lib_deps}
https://github.com/meshtastic/st7789/archive/bd33ea58ddfe4a5e4a66d53300ccbd38d66ac21f.zip

6
variants/nrf52840/heltec_mesh_solar/variant.cpp
View File

@@ -32,5 +32,9 @@ const uint32_t g_ADigitalPinMap[] = {
void initVariant()
{
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
pinMode(BQ4050_EMERGENCY_SHUTDOWN_PIN, INPUT);
#if defined(PIN_SCREEN_VDD_CTL)
pinMode(PIN_SCREEN_VDD_CTL, OUTPUT);
digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
#endif
}

41
variants/nrf52840/heltec_mesh_solar/variant.h
View File

@@ -39,16 +39,15 @@ extern "C" {
#define NUM_ANALOG_INPUTS (1)
#define NUM_ANALOG_OUTPUTS (0)
#define PIN_LED1 (0 + 12) // green (confirmed on 1.0 board)
#define PIN_LED1 (0 + 4) // green (confirmed on 1.0 board)
#define LED_BLUE PIN_LED1 // fake for bluefruit library
#define LED_GREEN PIN_LED1
#define LED_BUILTIN LED_GREEN
#define LED_STATE_ON 0 // State when LED is lit
#define LED_STATE_ON 0 // State when LED is lit
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA (32+15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_DATA (32 + 15) // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
/*
@@ -63,7 +62,6 @@ No longer populated on PCB
*/
#define PIN_SERIAL2_RX (0 + 9)
#define PIN_SERIAL2_TX (0 + 10)
// #define PIN_SERIAL2_EN (0 + 17)
/*
* I2C
@@ -71,16 +69,16 @@ No longer populated on PCB
#define WIRE_INTERFACES_COUNT 2
#ifndef HELTEC_MESH_SOLAR_OLED
// I2C bus 0
// Routed to footprint for PCF8563TS RTC
// Not populated on T114 V1, maybe in future?
#define PIN_WIRE_SDA (0 + 6) // P0.26
#define PIN_WIRE_SCL (0 + 26) // P0.26
#define PIN_WIRE_SDA (0 + 6)
#define PIN_WIRE_SCL (0 + 26)
#endif
// I2C bus 1
// Available on header pins, for general use
#define PIN_WIRE1_SDA (0 + 30) // P0.30
#define PIN_WIRE1_SCL (0 + 5) // P0.13
#define PIN_WIRE1_SDA (0 + 30)
#define PIN_WIRE1_SCL (0 + 5)
/*
* Lora radio
@@ -89,14 +87,14 @@ No longer populated on PCB
#define USE_SX1262
// #define USE_SX1268
#define SX126X_CS (0 + 24) // FIXME - we really should define LORA_CS instead
#define LORA_CS (0 + 24)
#define LORA_CS (0 + 24)
#define SX126X_DIO1 (0 + 20)
// Note DIO2 is attached internally to the module to an analog switch for TX/RX switching
// #define SX1262_DIO3 (0 + 21)
// This is used as an *output* from the sx1262 and connected internally to power the tcxo, do not drive from the
// main
// CPU?
#define SX126X_BUSY (0 + 17)
#define SX126X_BUSY (0 + 17)
#define SX126X_RESET (0 + 25)
// Not really an E22 but TTGO seems to be trying to clone that
#define SX126X_DIO2_AS_RF_SWITCH
@@ -118,32 +116,31 @@ No longer populated on PCB
#define PIN_GPS_PPS (32 + 4)
// Seems to be missing on this new board
// #define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS
#define GPS_THREAD_INTERVAL 50
#define PIN_SERIAL1_RX GPS_TX_PIN
#define PIN_SERIAL1_TX GPS_RX_PIN
#define PIN_SERIAL1_RX GPS_RX_PIN
#define PIN_SERIAL1_TX GPS_TX_PIN
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 1
// For LORA, spi 0
#define PIN_SPI_MISO (0 + 23)
#define PIN_SPI_MOSI (0 + 22)
#define PIN_SPI_SCK (0 + 19)
#define PIN_SPI_SCK (0 + 19)
// #define PIN_PWR_EN (0 + 6)
// To debug via the segger JLINK console rather than the CDC-ACM serial device
// #define USE_SEGGER
#define BQ4050_SDA_PIN (32+1) // I2C data line pin
#define BQ4050_SCL_PIN (32+0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32+3) // Emergency shutdown pin
#define BQ4050_SDA_PIN (32 + 1) // I2C data line pin
#define BQ4050_SCL_PIN (32 + 0) // I2C clock line pin
#define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin
#define HAS_RTC 0
#ifdef __cplusplus

25
variants/nrf52840/meshlink/platformio.ini
View File

@@ -9,7 +9,30 @@ board_level = extra
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/meshlink
-D MESHLINK
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-DRADIOLIB_EXCLUDE_SX128X=1
-DRADIOLIB_EXCLUDE_SX127X=1
-DRADIOLIB_EXCLUDE_LR11X0=1
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
lib_deps =
${nrf52840_base.lib_deps}
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
;upload_protocol = jlink
[env:meshlink_eink]
extends = nrf52840_base
board = meshlink
board_level = extra
;board_check = true
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/meshlink
-D MESHLINK
-DRADIOLIB_EXCLUDE_SX128X=1
-DRADIOLIB_EXCLUDE_SX127X=1
-DRADIOLIB_EXCLUDE_LR11X0=1
-D USE_EINK
-D EINK_DISPLAY_MODEL=GxEPD2_213_B74
-D EINK_WIDTH=250
-D EINK_HEIGHT=122

4
variants/nrf52840/meshlink/variant.h
View File

@@ -121,8 +121,8 @@ static const uint8_t SCK = PIN_SPI_SCK;
#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
#define GPS_TX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the GPS
// #define GPS_THREAD_INTERVAL 50

32
variants/nrf52840/meshlink_eink/platformio.ini
View File

@@ -1,32 +0,0 @@
; MeshLink board developed by LoraItalia. NRF52840, eByte E22900M22S (Will also come with other frequencies), 25w MPPT solar charger (5v,12v,18v selectable), support for gps, buzzer, oled or e-ink display, 10 gpios, hardware watchdog
; https://www.loraitalia.it
; firmware for boards with a 250x122 e-ink display
[env:meshlink_eink]
extends = nrf52840_base
board = meshlink
board_level = extra
;board_check = true
build_flags = ${nrf52840_base.build_flags}
-I variants/nrf52840/meshlink_eink
-D MESHLINK
-D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-D EINK_DISPLAY_MODEL=GxEPD2_213_B74
-D EINK_WIDTH=250
-D EINK_HEIGHT=122
-D USE_EINK_DYNAMICDISPLAY ; Enable Dynamic EInk
-D EINK_LIMIT_FASTREFRESH=5 ; How many consecutive fast-refreshes are permitted
-D EINK_LIMIT_RATE_BACKGROUND_SEC=30 ; Minimum interval between BACKGROUND updates
-D EINK_LIMIT_RATE_RESPONSIVE_SEC=1 ; Minimum interval between RESPONSIVE updates
-D EINK_LIMIT_GHOSTING_PX=2000 ; (Optional) How much image ghosting is tolerated
-D EINK_BACKGROUND_USES_FAST ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-D EINK_HASQUIRK_VICIOUSFASTREFRESH ; Identify that pixels drawn by fast-refresh are harder to clear
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink_eink>
lib_deps =
${nrf52840_base.lib_deps}
https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
debug_tool = jlink
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
;upload_protocol = jlink

23
variants/nrf52840/meshlink_eink/variant.cpp
View File

@@ -1,23 +0,0 @@
#include "variant.h"
#include "nrf.h"
#include "wiring_constants.h"
#include "wiring_digital.h"
const uint32_t g_ADigitalPinMap[] = {
// P0
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
// P1
32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
void initVariant()
{
pinMode(PIN_LED1, OUTPUT);
digitalWrite(PIN_LED1, HIGH); // turn off the white led while booting
// otherwise it will stay lit for several seconds (could be annoying)
#ifdef PIN_WD_EN
pinMode(PIN_WD_EN, OUTPUT);
digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
#endif
}

153
variants/nrf52840/meshlink_eink/variant.h
View File

@@ -1,153 +0,0 @@
#ifndef _VARIANT_MESHLINK_
#define _VARIANT_MESHLINK_
#ifndef MESHLINK
#define MESHLINK
#endif
/** Master clock frequency */
#define VARIANT_MCK (64000000ul)
// #define USE_LFXO // Board uses 32khz crystal for LF
#define USE_LFRC // Board uses RC for LF
/*----------------------------------------------------------------------------
* Headers
*----------------------------------------------------------------------------*/
#include "WVariant.h"
#ifdef __cplusplus
extern "C" {
#endif // __cplusplus
// Number of pins defined in PinDescription array
#define PINS_COUNT (48)
#define NUM_DIGITAL_PINS (48)
#define NUM_ANALOG_INPUTS (2)
#define NUM_ANALOG_OUTPUTS (0)
#define BUTTON_PIN (-1) // If defined, this will be used for user button presses,
#define BUTTON_NEED_PULLUP
// LEDs
#define PIN_LED1 (24) // Built in white led for status
#define LED_BLUE PIN_LED1
#define LED_BUILTIN PIN_LED1
#define LED_STATE_ON 0 // State when LED is litted
#define LED_INVERTED 1
// Testing USB detection
// #define NRF_APM
/*
* Analog pins
*/
#define PIN_A1 (3) // P0.03/AIN1
#define ADC_RESOLUTION 14
// Other pins
// #define PIN_AREF (2)
// static const uint8_t AREF = PIN_AREF;
/*
* Serial interfaces
*/
#define PIN_SERIAL1_RX (32 + 8)
#define PIN_SERIAL1_TX (7)
/*
* SPI Interfaces
*/
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO (8)
#define PIN_SPI_MOSI (32 + 9)
#define PIN_SPI_SCK (11)
#define PIN_SPI1_MISO (23)
#define PIN_SPI1_MOSI (21)
#define PIN_SPI1_SCK (19)
static const uint8_t SS = 12;
static const uint8_t MOSI = PIN_SPI_MOSI;
static const uint8_t MISO = PIN_SPI_MISO;
static const uint8_t SCK = PIN_SPI_SCK;
/*
* eink display pins
*/
#define USE_EINK
#define PIN_EINK_CS (15)
#define PIN_EINK_BUSY (16)
#define PIN_EINK_DC (14)
#define PIN_EINK_RES (17)
#define PIN_EINK_SCLK (19)
#define PIN_EINK_MOSI (21) // also called SDI
/*
* Wire Interfaces
*/
#define WIRE_INTERFACES_COUNT 1
#define PIN_WIRE_SDA (1)
#define PIN_WIRE_SCL (27)
// QSPI Pins
#define PIN_QSPI_SCK 19
#define PIN_QSPI_CS 22
#define PIN_QSPI_IO0 21
#define PIN_QSPI_IO1 23
#define PIN_QSPI_IO2 32
#define PIN_QSPI_IO3 20
// On-board QSPI Flash
#define EXTERNAL_FLASH_DEVICES W25Q16JVUXIQ
#define EXTERNAL_FLASH_USE_QSPI
#define USE_SX1262
#define SX126X_CS (12)
#define SX126X_DIO1 (32 + 1)
#define SX126X_BUSY (32 + 3)
#define SX126X_RESET (6)
// #define SX126X_RXEN (13)
// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
// pin 25 is used to enable or disable the watchdog. This pin has to be disabled when cpu is put to sleep
// otherwise the timer will expire and wd will reboot the cpu
#define PIN_WD_EN (25)
#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
// #define GPS_THREAD_INTERVAL 50
// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
#define PIN_GPS_EN (0)
#define GPS_EN_ACTIVE LOW
#define PIN_BUZZER (31) // P0.31/AIN7
// Battery
// The battery sense is hooked to pin A0 (2)
#define BATTERY_PIN (2)
// and has 12 bit resolution
#define BATTERY_SENSE_RESOLUTION_BITS 12
#define BATTERY_SENSE_RESOLUTION 4096.0
#undef AREF_VOLTAGE
#define AREF_VOLTAGE 3.0
#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
#define ADC_MULTIPLIER 1.42 // fine tuning of voltage
#ifdef __cplusplus
}
#endif
/*----------------------------------------------------------------------------
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif

Some files were not shown because too many files have changed in this diff Show More