rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-10 11:57:25 +00:00
Code Issues Packages Projects Releases Wiki Activity

doc updates

Browse Source
This commit is contained in:
geeksville
2020-05-18 17:02:51 -07:00
parent 19f5a5ef79
commit 53c3d9baa2
2 changed files with 6 additions and 6 deletions
Download Patch File Download Diff File Expand all files Collapse all files

6
docs/software/nrf52-TODO.md
View File

@@ -2,8 +2,6 @@
## Misc work items
* on node 0x1c transmit complete interrupt never comes in - though other nodes receive the packet
## Initial work items
Minimum items needed to make sure hardware is good.
@@ -42,7 +40,6 @@ Needed to be fully functional at least at the same level of the ESP32 boards. At
- use SX126x::startReceiveDutyCycleAuto to save power by sleeping and briefly waking to check for preamble bits. Change xmit rules to have more preamble bits.
- turn back on in-radio destaddr checking for RF95
- remove the MeshRadio wrapper - we don't need it anymore, just do everythin in RadioInterface subclasses.
- figure out what the correct current limit should be for the sx1262, currently we just use the default 100
- put sx1262 in sleepmode when processor gets shutdown (or rebooted), ideally even for critical faults (to keep power draw low). repurpose deepsleep state for this.
- good power management tips: https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/optimizing-power-on-nrf52-designs
@@ -59,6 +56,8 @@ Needed to be fully functional at least at the same level of the ESP32 boards. At
Nice ideas worth considering someday...
- Use flego to me an iOS/linux app? https://felgo.com/doc/qt/qtbluetooth-index/ or
- Use flutter to make an iOS/linux app? https://github.com/Polidea/FlutterBleLib
- make a Mfg Controller and device under test classes as examples of custom app code for third party devs. Make a post about this. Use a custom payload type code. Have device under test send a broadcast with max hopcount of 0 for the 'mfgcontroller' payload type. mfg controller will read SNR and reply. DOT will declare failure/success and switch to the regular app screen.
- Hook Segger RTT to the nordic logging framework. https://devzone.nordicsemi.com/nordic/nordic-blog/b/blog/posts/debugging-with-real-time-terminal
- Use nordic logging for DEBUG_MSG
@@ -115,6 +114,7 @@ Nice ideas worth considering someday...
#define PIN_WIRE_SDA (26)
#define PIN_WIRE_SCL (27)
- customize the bootloader to use proper button bindings
- remove the MeshRadio wrapper - we don't need it anymore, just do everything in RadioInterface subclasses.
```