Unify the native display config between legacy display and MUI (#6838)

* Add missed include

* Another Warning fix

* Add another HAS_SCREEN

* Namespace fixes

* Removed depricated destination types and re-factored destination screen

* Get rid of Arduino Strings

* Clean up after Copilot

* SixthLine Def, Screen Rename

Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment

* Consistency is hard - fixed "Sixth"

* System Frame Updates

Adjusted line construction to ensure we fit maximum content per screen.

* Fix up notifications

* Add a couple more ifdef HAS_SCREEN lines

* Add screen->isOverlayBannerShowing()

* Don't forget the invert!

* Adjust Nodelist Center Divider

Adjust Nodelist Center Divider

* Fix variable casting

* Fix entryText variable as empty before update to fix validation

* Altitude is int32_t

* Update PowerTelemetry to have correct data type

* Fix cppcheck warnings (#6945)

* Fix cppcheck warnings

* Adjust logic in Power.cpp for power sensor

---------

Co-authored-by: Jason P <applewiz@mac.com>

* More pixel wrangling so things line up NodeList edition

* Adjust NodeList alignments and plumb some background padding for a possible title fix

* Better alignment for banner notifications

* Move title into drawCommonHeader; initial screen tested

* Fonts make spacing items difficult

* Improved beeping booping and other buzzer based feedback (#6947)

* Improved beeping booping and other buzzer based feedback

* audible button feedback (#6949)

* Refactor

---------

Co-authored-by: todd-herbert <herbert.todd@gmail.com>

* Sandpapered the corners of the notification popup

* Finalize drawCommonHeader migration

* Update Title of Favorite Node Screens

* Update node metric alignment on LoRa screen

* Update the border for popups to separate it from background

* Update PaxcounterModule.cpp with CommonHeader

* Update WiFi screen with CommonHeader and related data reflow

* It was not, in fact, pointing up

* Fix build on wismeshtap

* T-deck trackball debounce

* Fix uptime on Device Focused page to actually detail

* Update Sys screen for new uptime, add label to Freq/Chan on LoRa

* Don't display DOP any longer, make Uptime consistent

* Revert Uptime change on Favorites, Apply to Device Focused

* Label the satelite number to avoid confusion

* Boop boop boop boop

* Correct GPS positioning and string consistency across strings for GPS

* Fix GPS text alignment

* Enable canned messages by default

* Don't wake screen on new nodes

* Cannedmessage list emote support added

* Fn+e emote picker for freetext screen

* Actually block CannedInput actions while display is shown

* Add selection menu to bannerOverlay

* Off by one

* Move to unified text layouts and spacing

* Still my Fav without an "e"

* Fully remove EVENT_NODEDB_UPDATED

* Simply LoRa screen

* Make some char pointers const to fix compilation on native targets

* Update drawCompassNorth to include radius

* Fix warning

* button thread cleanup

* Pull OneButton handling from PowerFSM and add MUI switch (#6973)

* Trunk

* Onebutton Menu Support

* Add temporary clock icon

* Add gps location to fsi

* Banner message state reset

* Cast to char to satisfy compiler

* Better fast handling of input during banner

* Fix warning

* Derp

* oops

* Update ref

* Wire buzzer_mode

* remove legacy string->print()

* Only init screen if one found

* Unsigned Char

* More buttonThread cleaning

* screen.cpp button handling cleanup

* The Great Event Rename of 2025

* Fix the Radiomaster

* Missed trackball type change

* Remove unused function

* Make ButtonThread an InputBroker

* Coffee hadn't kicked in yet

* Add clock icon for Navigation Bar

* Restore clock screen definition code - whoops

* ExternalNotifications now observe inputBroker

* Clock rework (#6992)

* Move Clock bits into ClockRenderer space

* Rework clock into all device navigation

* T-Watch Actually Builds Different

* Compile fix

---------

Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz>

* Add AM/PM to Digital Clock

* Flip Seconds and AM/PM on Clock Display

* Tik-tok pixels are hard

* Fix builds on Thinknode M1

* Check for GPS and don't crash

* Don't endif til the end

* Rework the OneButton thread to be much less of a mess. (#6997)

* Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily

* Update src/input/ButtonThread.h

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* fix GPS toggle

* Send the shutdown event, not just the kbchar

* Honor the back button in a notificaiton popup

* Draw the right size box for popup with options

* Try to un-break all the things

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* 24-hour Clock Should have leading zero, but not 12-hour

* Fixup some compile errors

* Add intRoutine to ButtonThread init, to get more responsive user button back

* Add Timezone picker

* Fix Warning

* Optionally set the initial selection for the chooser popup

* Make back buttons work in canned messages

* Drop the wrapper classes

* LonPressTime now configurable

* Clock Frame can not longer be blank; just add valid time

* Back buttons everywhere!

* Key Verification confirm banner

* Make Elecrow M* top button a back button

* Add settings saves

* EInk responsiveness fixes

* Linux Input Fixes

* Add Native Trackball/Joystick support, and move UserButton to Input

* No Flight Stick Mode

* Send input event

* Add Channel Utilization to Device Focused frame

* Don't shift screens when we draw new ones

* Add showOverlayBanner arguments to no-op

* trunk

* Default Native trackball to NC

* Fix crash in simulator mode

* Add longLong button press

* Get the args right

* Adjust Bluetooth Pairing Screen to account for bottom navigation.

* Trackball everywhere, and unPhone buttons

* Remap visionmaster secondary button to TB_UP

* Kill ScanAndSelect

* trunk

* No longer need the canned messages input filter

* All Canned All the time

* Fix stm32 compile error regarding inputBroker

* Unify tft lineheights (#7033)

* Create variable line heights based upon SCREEN_HEIGHT

* Refactor textPositions into method -> getTextPositions

* Update SharedUIDisplay.h

---------

Co-authored-by: Jason P <applewiz@mac.com>

* Adjust top distance for larger displays

* Adjust icon sizes for larger displays

* Fix Paxcounter compile errors after code updates

* Pixel wrangling to make larger screens fit better

* Alert frame has precedence over banner -- for now

* Unify on ALT_BUTTON

* Align AM/PM to the digit, not the segment on larger displays

* Move some global pin defines into configuration.h

* Scaffolding for BMM150 9-axis gyro

* Alt button behavior

* Don't add the blank GPS frames without HAS_GPS

* EVENT_NODEDB_UPDATED has been retired

* Clean out LOG_WARN messages from debugging

* Add dismiss message function

* Minor buttonThread cleanup

* Add BMM150 support

* Clean up last warning from dev

* Simplify bmm150 init return logic

* Add option to reply to messages

* Add minimal menu upon selecting home screen

* Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp

* Properly dismiss message

* T-Deck Trackball press is not user button

* Add select on favorite frame to launch cannedMessage DM

* Minor wording change

* Less capital letters

* Fix empty message check, time isn't reliable

* drop dead code

* Make UIRenderer a static class instead of namespace

* Fix the select on favorite

* Check if message is empty early and then 'return'

* Add kb_found, and show the option to launch freetype if appropriate

* Ignore impossible touchscreen touches

* Auto scroll fix

* Move linebreak after "from" for banners to maximize screen usage.

* Center "No messages to show" on Message frame

* Start consolidating buzzer behavior

* Fixed signed / unsigned warning

* Cast second parameter of max() to make some targets happy

* Cast kbchar to (char) to make arduino string happy

* Shorten the notice of "No messages"

* Add buzzer mode chooser

* Add regionPicker to Lora icon

* Reduce line spacing and reorder Position screen to resolve overlapping issues

* Update message titles, fix GPS icons, add Back options

* Leftover boops

* Remove chirp

* Make the region selection dismissable when a region is already set

* Add read-aloud functionality on messages w/ esp8266sam

* "Last Heard" is a better label

* tweak the beep

* 5 options

* properly tear down freetext upon cancel

* de-convelute canned messages just a bit

* Correct height of Mail icon in navigation bar

* Remove unused warning

* Consolidate time methods into TimeFormatters

* Oops

* Change LoRa Picker Cancel to Back

* Tweak selection characters on Banner

* Message render not scrolling on 5th line

* More fixes for message scrolling

* Remove the safety next on text overflow - we found that root cause

* Add pin definitions to fix compilation for obscure target

* Don't let the touchscreen send unitialized kbchar values

* Make virtual KB just a bit quicker

* No more double tap, swipe!

* Left is left, and Right is right

* Update horizontal lightning bolt design

* Move from solid to dashed separator for Message Frame

* Single emote feature fix

* Manually sort overlapping elements for now

* Freetext and clearer choices

* Fix ESP32 InkHUD builds on the unify-tft branch (#7087)

* Remove BaseUI branding

* Capitalization is fun

* Revert Meshtastic Boot Frame Changes

* Add ANZ_433 LoRa region to picker

* Update settings.json

---------

Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Jason P <applewiz@mac.com>
Co-authored-by: todd-herbert <herbert.todd@gmail.com>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

src/modules/AdminModule.cpp

@@ -5,6 +5,7 @@
 #include "PowerFSM.h"
 #include "RTC.h"
 #include "SPILock.h"
+#include "input/InputBroker.h"
 #include "meshUtils.h"
 #include <FSCommon.h>
 #include <ctype.h> // for better whitespace handling
@@ -223,14 +224,16 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
 #if defined(ARCH_ESP32)
 #if !MESHTASTIC_EXCLUDE_BLUETOOTH
         if (!BleOta::getOtaAppVersion().isEmpty()) {
-            screen->startFirmwareUpdateScreen();
+            if (screen)
+                screen->startFirmwareUpdateScreen();
             BleOta::switchToOtaApp();
             LOG_INFO("Rebooting to BLE OTA");
         }
 #endif
 #if !MESHTASTIC_EXCLUDE_WIFI
         if (WiFiOTA::trySwitchToOTA()) {
-            screen->startFirmwareUpdateScreen();
+            if (screen)
+                screen->startFirmwareUpdateScreen();
             WiFiOTA::saveConfig(&config.network);
             LOG_INFO("Rebooting to WiFi OTA");
         }
@@ -320,6 +323,8 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         if (node != NULL) {
             node->is_favorite = true;
             saveChanges(SEGMENT_NODEDATABASE, false);
+            if (screen)
+                screen->setFrames(graphics::Screen::FOCUS_PRESERVE); // <-- Rebuild screens
         }
         break;
     }
@@ -329,6 +334,8 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         if (node != NULL) {
             node->is_favorite = false;
             saveChanges(SEGMENT_NODEDATABASE, false);
+            if (screen)
+                screen->setFrames(graphics::Screen::FOCUS_PRESERVE); // <-- Rebuild screens
         }
         break;
     }
@@ -443,6 +450,11 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
 #endif
         break;
     }
+    case meshtastic_AdminMessage_send_input_event_tag: {
+        LOG_INFO("Client requesting to send input event");
+        handleSendInputEvent(r->send_input_event);
+        break;
+    }
 #ifdef ARCH_PORTDUINO
     case meshtastic_AdminMessage_exit_simulator_tag:
         LOG_INFO("Exiting simulator");
@@ -530,7 +542,7 @@ void AdminModule::handleSetOwner(const meshtastic_User &o)
     if (owner.has_is_unmessagable != o.has_is_unmessagable ||
         (o.has_is_unmessagable && owner.is_unmessagable != o.is_unmessagable)) {
         changed = 1;
-        owner.has_is_unmessagable = o.has_is_unmessagable || o.has_is_unmessagable;
+        owner.has_is_unmessagable = owner.has_is_unmessagable || o.has_is_unmessagable;
         owner.is_unmessagable = o.is_unmessagable;
     }
 
@@ -643,8 +655,12 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.has_display = true;
         if (config.display.screen_on_secs == c.payload_variant.display.screen_on_secs &&
             config.display.flip_screen == c.payload_variant.display.flip_screen &&
-            config.display.oled == c.payload_variant.display.oled) {
+            config.display.oled == c.payload_variant.display.oled &&
+            config.display.displaymode == c.payload_variant.display.displaymode) {
             requiresReboot = false;
+        } else if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR &&
+                   c.payload_variant.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+            config.bluetooth.enabled = false;
         }
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (config.display.wake_on_tap_or_motion == false && c.payload_variant.display.wake_on_tap_or_motion == true &&
@@ -1157,7 +1173,8 @@ void AdminModule::handleGetDeviceUIConfig(const meshtastic_MeshPacket &req)
 void AdminModule::reboot(int32_t seconds)
 {
     LOG_INFO("Reboot in %d seconds", seconds);
-    screen->startAlert("Rebooting...");
+    if (screen)
+        screen->showOverlayBanner("Rebooting...", 0); // stays on screen
     rebootAtMsec = (seconds < 0) ? 0 : (millis() + seconds * 1000);
 }
 
@@ -1288,6 +1305,39 @@ bool AdminModule::messageIsRequest(const meshtastic_AdminMessage *r)
         return false;
 }
 
+void AdminModule::handleSendInputEvent(const meshtastic_AdminMessage_InputEvent &inputEvent)
+{
+    LOG_DEBUG("Processing input event: event_code=%u, kb_char=%u, touch_x=%u, touch_y=%u", inputEvent.event_code,
+              inputEvent.kb_char, inputEvent.touch_x, inputEvent.touch_y);
+
+    // Validate input parameters
+    if (inputEvent.event_code > INPUT_BROKER_ANYKEY) {
+        LOG_WARN("Invalid input event code: %u", inputEvent.event_code);
+        return;
+    }
+
+    // Create InputEvent for injection
+    InputEvent event = {.inputEvent = (input_broker_event)inputEvent.event_code,
+                        .kbchar = (unsigned char)inputEvent.kb_char,
+                        .touchX = inputEvent.touch_x,
+                        .touchY = inputEvent.touch_y};
+
+    // Log the event being injected
+    LOG_INFO("Injecting input event from admin: source=%s, event=%u, char=%c(%u), touch=(%u,%u)", event.source, event.inputEvent,
+             (event.kbchar >= 32 && event.kbchar <= 126) ? event.kbchar : '?', event.kbchar, event.touchX, event.touchY);
+
+    // Wake the device if asleep
+    powerFSM.trigger(EVENT_INPUT);
+#if !defined(MESHTASTIC_EXCLUDE_INPUTBROKER)
+    // Inject the event through InputBroker
+    if (inputBroker) {
+        inputBroker->injectInputEvent(&event);
+    } else {
+        LOG_ERROR("InputBroker not available for event injection");
+    }
+#endif
+}
+
 void AdminModule::sendWarning(const char *message)
 {
     meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed();