Unify the native display config between legacy display and MUI (#6838)

* Add missed include * Another Warning fix * Add another HAS_SCREEN * Namespace fixes * Removed depricated destination types and re-factored destination screen * Get rid of Arduino Strings * Clean up after Copilot * SixthLine Def, Screen Rename Added Sixth Line Definition Screen Rename, and Automatic Line Adjustment * Consistency is hard - fixed "Sixth" * System Frame Updates Adjusted line construction to ensure we fit maximum content per screen. * Fix up notifications * Add a couple more ifdef HAS_SCREEN lines * Add screen->isOverlayBannerShowing() * Don't forget the invert! * Adjust Nodelist Center Divider Adjust Nodelist Center Divider * Fix variable casting * Fix entryText variable as empty before update to fix validation * Altitude is int32_t * Update PowerTelemetry to have correct data type * Fix cppcheck warnings (#6945) * Fix cppcheck warnings * Adjust logic in Power.cpp for power sensor --------- Co-authored-by: Jason P <applewiz@mac.com> * More pixel wrangling so things line up NodeList edition * Adjust NodeList alignments and plumb some background padding for a possible title fix * Better alignment for banner notifications * Move title into drawCommonHeader; initial screen tested * Fonts make spacing items difficult * Improved beeping booping and other buzzer based feedback (#6947) * Improved beeping booping and other buzzer based feedback * audible button feedback (#6949) * Refactor --------- Co-authored-by: todd-herbert <herbert.todd@gmail.com> * Sandpapered the corners of the notification popup * Finalize drawCommonHeader migration * Update Title of Favorite Node Screens * Update node metric alignment on LoRa screen * Update the border for popups to separate it from background * Update PaxcounterModule.cpp with CommonHeader * Update WiFi screen with CommonHeader and related data reflow * It was not, in fact, pointing up * Fix build on wismeshtap * T-deck trackball debounce * Fix uptime on Device Focused page to actually detail * Update Sys screen for new uptime, add label to Freq/Chan on LoRa * Don't display DOP any longer, make Uptime consistent * Revert Uptime change on Favorites, Apply to Device Focused * Label the satelite number to avoid confusion * Boop boop boop boop * Correct GPS positioning and string consistency across strings for GPS * Fix GPS text alignment * Enable canned messages by default * Don't wake screen on new nodes * Cannedmessage list emote support added * Fn+e emote picker for freetext screen * Actually block CannedInput actions while display is shown * Add selection menu to bannerOverlay * Off by one * Move to unified text layouts and spacing * Still my Fav without an "e" * Fully remove EVENT_NODEDB_UPDATED * Simply LoRa screen * Make some char pointers const to fix compilation on native targets * Update drawCompassNorth to include radius * Fix warning * button thread cleanup * Pull OneButton handling from PowerFSM and add MUI switch (#6973) * Trunk * Onebutton Menu Support * Add temporary clock icon * Add gps location to fsi * Banner message state reset * Cast to char to satisfy compiler * Better fast handling of input during banner * Fix warning * Derp * oops * Update ref * Wire buzzer_mode * remove legacy string->print() * Only init screen if one found * Unsigned Char * More buttonThread cleaning * screen.cpp button handling cleanup * The Great Event Rename of 2025 * Fix the Radiomaster * Missed trackball type change * Remove unused function * Make ButtonThread an InputBroker * Coffee hadn't kicked in yet * Add clock icon for Navigation Bar * Restore clock screen definition code - whoops * ExternalNotifications now observe inputBroker * Clock rework (#6992) * Move Clock bits into ClockRenderer space * Rework clock into all device navigation * T-Watch Actually Builds Different * Compile fix --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add AM/PM to Digital Clock * Flip Seconds and AM/PM on Clock Display * Tik-tok pixels are hard * Fix builds on Thinknode M1 * Check for GPS and don't crash * Don't endif til the end * Rework the OneButton thread to be much less of a mess. (#6997) * Rework the OneButton thread to be much less of a mess. And break lots of targets temporarily * Update src/input/ButtonThread.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * fix GPS toggle * Send the shutdown event, not just the kbchar * Honor the back button in a notificaiton popup * Draw the right size box for popup with options * Try to un-break all the things --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * 24-hour Clock Should have leading zero, but not 12-hour * Fixup some compile errors * Add intRoutine to ButtonThread init, to get more responsive user button back * Add Timezone picker * Fix Warning * Optionally set the initial selection for the chooser popup * Make back buttons work in canned messages * Drop the wrapper classes * LonPressTime now configurable * Clock Frame can not longer be blank; just add valid time * Back buttons everywhere! * Key Verification confirm banner * Make Elecrow M* top button a back button * Add settings saves * EInk responsiveness fixes * Linux Input Fixes * Add Native Trackball/Joystick support, and move UserButton to Input * No Flight Stick Mode * Send input event * Add Channel Utilization to Device Focused frame * Don't shift screens when we draw new ones * Add showOverlayBanner arguments to no-op * trunk * Default Native trackball to NC * Fix crash in simulator mode * Add longLong button press * Get the args right * Adjust Bluetooth Pairing Screen to account for bottom navigation. * Trackball everywhere, and unPhone buttons * Remap visionmaster secondary button to TB_UP * Kill ScanAndSelect * trunk * No longer need the canned messages input filter * All Canned All the time * Fix stm32 compile error regarding inputBroker * Unify tft lineheights (#7033) * Create variable line heights based upon SCREEN_HEIGHT * Refactor textPositions into method -> getTextPositions * Update SharedUIDisplay.h --------- Co-authored-by: Jason P <applewiz@mac.com> * Adjust top distance for larger displays * Adjust icon sizes for larger displays * Fix Paxcounter compile errors after code updates * Pixel wrangling to make larger screens fit better * Alert frame has precedence over banner -- for now * Unify on ALT_BUTTON * Align AM/PM to the digit, not the segment on larger displays * Move some global pin defines into configuration.h * Scaffolding for BMM150 9-axis gyro * Alt button behavior * Don't add the blank GPS frames without HAS_GPS * EVENT_NODEDB_UPDATED has been retired * Clean out LOG_WARN messages from debugging * Add dismiss message function * Minor buttonThread cleanup * Add BMM150 support * Clean up last warning from dev * Simplify bmm150 init return logic * Add option to reply to messages * Add minimal menu upon selecting home screen * Move Messages to slot 2, rename GPS to Position, move variables nearer functional usage in Screen.cpp * Properly dismiss message * T-Deck Trackball press is not user button * Add select on favorite frame to launch cannedMessage DM * Minor wording change * Less capital letters * Fix empty message check, time isn't reliable * drop dead code * Make UIRenderer a static class instead of namespace * Fix the select on favorite * Check if message is empty early and then 'return' * Add kb_found, and show the option to launch freetype if appropriate * Ignore impossible touchscreen touches * Auto scroll fix * Move linebreak after "from" for banners to maximize screen usage. * Center "No messages to show" on Message frame * Start consolidating buzzer behavior * Fixed signed / unsigned warning * Cast second parameter of max() to make some targets happy * Cast kbchar to (char) to make arduino string happy * Shorten the notice of "No messages" * Add buzzer mode chooser * Add regionPicker to Lora icon * Reduce line spacing and reorder Position screen to resolve overlapping issues * Update message titles, fix GPS icons, add Back options * Leftover boops * Remove chirp * Make the region selection dismissable when a region is already set * Add read-aloud functionality on messages w/ esp8266sam * "Last Heard" is a better label * tweak the beep * 5 options * properly tear down freetext upon cancel * de-convelute canned messages just a bit * Correct height of Mail icon in navigation bar * Remove unused warning * Consolidate time methods into TimeFormatters * Oops * Change LoRa Picker Cancel to Back * Tweak selection characters on Banner * Message render not scrolling on 5th line * More fixes for message scrolling * Remove the safety next on text overflow - we found that root cause * Add pin definitions to fix compilation for obscure target * Don't let the touchscreen send unitialized kbchar values * Make virtual KB just a bit quicker * No more double tap, swipe! * Left is left, and Right is right * Update horizontal lightning bolt design * Move from solid to dashed separator for Message Frame * Single emote feature fix * Manually sort overlapping elements for now * Freetext and clearer choices * Fix ESP32 InkHUD builds on the unify-tft branch (#7087) * Remove BaseUI branding * Capitalization is fun * Revert Meshtastic Boot Frame Changes * Add ANZ_433 LoRa region to picker * Update settings.json --------- Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
2025-12-20 17:52:35 +00:00 · 2025-06-21 06:36:04 -05:00
parent 82b7cb5dd0
commit 4feaec651f
154 changed files with 9852 additions and 4501 deletions
--- a/src/graphics/draw/DebugRenderer.cpp
+++ b/src/graphics/draw/DebugRenderer.cpp
@@ -0,0 +1,634 @@
+#include "configuration.h"
+#if HAS_SCREEN
+#include "../Screen.h"
+#include "DebugRenderer.h"
+#include "FSCommon.h"
+#include "NodeDB.h"
+#include "Throttle.h"
+#include "UIRenderer.h"
+#include "airtime.h"
+#include "gps/RTC.h"
+#include "graphics/ScreenFonts.h"
+#include "graphics/SharedUIDisplay.h"
+#include "graphics/images.h"
+#include "main.h"
+#include "mesh/Channels.h"
+#include "mesh/generated/meshtastic/deviceonly.pb.h"
+#include "sleep.h"
+
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+#include "mesh/wifi/WiFiAPClient.h"
+#include <WiFi.h>
+#ifdef ARCH_ESP32
+#include "mesh/wifi/WiFiAPClient.h"
+#endif
+#endif
+
+#ifdef ARCH_ESP32
+#include "modules/StoreForwardModule.h"
+#endif
+#include <DisplayFormatters.h>
+#include <RadioLibInterface.h>
+#include <target_specific.h>
+
+using namespace meshtastic;
+
+// External variables
+extern graphics::Screen *screen;
+extern PowerStatus *powerStatus;
+extern NodeStatus *nodeStatus;
+extern GPSStatus *gpsStatus;
+extern Channels channels;
+extern AirTime *airTime;
+
+// External functions from Screen.cpp
+extern bool heartbeat;
+
+#ifdef ARCH_ESP32
+extern StoreForwardModule *storeForwardModule;
+#endif
+
+namespace graphics
+{
+namespace DebugRenderer
+{
+
+void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->setFont(FONT_SMALL);
+
+    // The coordinates define the left starting point of the text
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
+        display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+        display->setColor(BLACK);
+    }
+
+    char channelStr[20];
+    snprintf(channelStr, sizeof(channelStr), "#%s", channels.getName(channels.getPrimaryIndex()));
+
+    // Display power status
+    if (powerStatus->getHasBattery()) {
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            UIRenderer::drawBattery(display, x, y + 2, imgBattery, powerStatus);
+        } else {
+            UIRenderer::drawBattery(display, x + 1, y + 3, imgBattery, powerStatus);
+        }
+    } else if (powerStatus->knowsUSB()) {
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            display->drawFastImage(x, y + 2, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
+        } else {
+            display->drawFastImage(x + 1, y + 3, 16, 8, powerStatus->getHasUSB() ? imgUSB : imgPower);
+        }
+    }
+    // Display nodes status
+    if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+        UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 2, nodeStatus);
+    } else {
+        UIRenderer::drawNodes(display, x + (SCREEN_WIDTH * 0.25), y + 3, nodeStatus);
+    }
+#if HAS_GPS
+    // Display GPS status
+    if (config.position.gps_mode != meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+        UIRenderer::drawGpsPowerStatus(display, x, y + 2, gpsStatus);
+    } else {
+        if (config.display.displaymode == meshtastic_Config_DisplayConfig_DisplayMode_DEFAULT) {
+            UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 2, gpsStatus);
+        } else {
+            UIRenderer::drawGps(display, x + (SCREEN_WIDTH * 0.63), y + 3, gpsStatus);
+        }
+    }
+#endif
+    display->setColor(WHITE);
+    // Draw the channel name
+    display->drawString(x, y + FONT_HEIGHT_SMALL, channelStr);
+    // Draw our hardware ID to assist with bluetooth pairing. Either prefix with Info or S&F Logo
+    if (moduleConfig.store_forward.enabled) {
+#ifdef ARCH_ESP32
+        if (!Throttle::isWithinTimespanMs(storeForwardModule->lastHeartbeat,
+                                          (storeForwardModule->heartbeatInterval * 1200))) { // no heartbeat, overlap a bit
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12,
+                                   8, imgQuestionL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12,
+                                   8, imgQuestionL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8,
+                                   8, imgQuestion);
+#endif
+        } else {
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS)) &&                                  \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 16,
+                                   8, imgSFL1);
+            display->drawFastImage(x + SCREEN_WIDTH - 18 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 16,
+                                   8, imgSFL2);
+#else
+            display->drawFastImage(x + SCREEN_WIDTH - 13 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 11,
+                                   8, imgSF);
+#endif
+        }
+#endif
+    } else {
+        // TODO: Raspberry Pi supports more than just the one screen size
+#if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) ||      \
+     defined(ST7789_CS) || defined(USE_ST7789) || defined(ILI9488_CS) || defined(HX8357_CS) || ARCH_PORTDUINO) &&                \
+    !defined(DISPLAY_FORCE_SMALL_FONTS)
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 3 + FONT_HEIGHT_SMALL, 12, 8,
+                               imgInfoL1);
+        display->drawFastImage(x + SCREEN_WIDTH - 14 - display->getStringWidth(screen->ourId), y + 11 + FONT_HEIGHT_SMALL, 12, 8,
+                               imgInfoL2);
+#else
+        display->drawFastImage(x + SCREEN_WIDTH - 10 - display->getStringWidth(screen->ourId), y + 2 + FONT_HEIGHT_SMALL, 8, 8,
+                               imgInfo);
+#endif
+    }
+
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(screen->ourId), y + FONT_HEIGHT_SMALL, screen->ourId);
+
+    // Draw any log messages
+    display->drawLogBuffer(x, y + (FONT_HEIGHT_SMALL * 2));
+
+    /* Display a heartbeat pixel that blinks every time the frame is redrawn */
+#ifdef SHOW_REDRAWS
+    if (heartbeat)
+        display->setPixel(0, 0);
+    heartbeat = !heartbeat;
+#endif
+}
+
+// ****************************
+// * WiFi Screen              *
+// ****************************
+void drawFrameWiFi(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+#if HAS_WIFI && !defined(ARCH_PORTDUINO)
+    display->clear();
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    int line = 1;
+
+    // === Set Title
+    const char *titleStr = "WiFi";
+
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr);
+
+    const char *wifiName = config.network.wifi_ssid;
+
+    if (WiFi.status() != WL_CONNECTED) {
+        display->drawString(x, getTextPositions(display)[line++], "WiFi: Not Connected");
+    } else {
+        display->drawString(x, getTextPositions(display)[line++], "WiFi: Connected");
+
+        char rssiStr[32];
+        snprintf(rssiStr, sizeof(rssiStr), "RSSI: %d", WiFi.RSSI());
+        display->drawString(x, getTextPositions(display)[line++], rssiStr);
+    }
+
+    /*
+    - WL_CONNECTED: assigned when connected to a WiFi network;
+    - WL_NO_SSID_AVAIL: assigned when no SSID are available;
+    - WL_CONNECT_FAILED: assigned when the connection fails for all the attempts;
+    - WL_CONNECTION_LOST: assigned when the connection is lost;
+    - WL_DISCONNECTED: assigned when disconnected from a network;
+    - WL_IDLE_STATUS: it is a temporary status assigned when WiFi.begin() is called and remains active until the number of
+    attempts expires (resulting in WL_CONNECT_FAILED) or a connection is established (resulting in WL_CONNECTED);
+    - WL_SCAN_COMPLETED: assigned when the scan networks is completed;
+    - WL_NO_SHIELD: assigned when no WiFi shield is present;
+
+    */
+    if (WiFi.status() == WL_CONNECTED) {
+        char ipStr[64];
+        snprintf(ipStr, sizeof(ipStr), "IP: %s", WiFi.localIP().toString().c_str());
+        display->drawString(x, getTextPositions(display)[line++], ipStr);
+    } else if (WiFi.status() == WL_NO_SSID_AVAIL) {
+        display->drawString(x, getTextPositions(display)[line++], "SSID Not Found");
+    } else if (WiFi.status() == WL_CONNECTION_LOST) {
+        display->drawString(x, getTextPositions(display)[line++], "Connection Lost");
+    } else if (WiFi.status() == WL_IDLE_STATUS) {
+        display->drawString(x, getTextPositions(display)[line++], "Idle ... Reconnecting");
+    } else if (WiFi.status() == WL_CONNECT_FAILED) {
+        display->drawString(x, getTextPositions(display)[line++], "Connection Failed");
+    }
+#ifdef ARCH_ESP32
+    else {
+        // Codes:
+        // https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-guides/wifi.html#wi-fi-reason-code
+        display->drawString(x, getTextPositions(display)[line++],
+                            WiFi.disconnectReasonName(static_cast<wifi_err_reason_t>(getWifiDisconnectReason())));
+    }
+#else
+    else {
+        char statusStr[32];
+        snprintf(statusStr, sizeof(statusStr), "Unknown status: %d", WiFi.status());
+        display->drawString(x, getTextPositions(display)[line++], statusStr);
+    }
+#endif
+
+    char ssidStr[64];
+    snprintf(ssidStr, sizeof(ssidStr), "SSID: %s", wifiName);
+    display->drawString(x, getTextPositions(display)[line++], ssidStr);
+
+    display->drawString(x, getTextPositions(display)[line++], "URL: http://meshtastic.local");
+
+    /* Display a heartbeat pixel that blinks every time the frame is redrawn */
+#ifdef SHOW_REDRAWS
+    if (heartbeat)
+        display->setPixel(0, 0);
+    heartbeat = !heartbeat;
+#endif
+#endif
+}
+
+void drawFrameSettings(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->setFont(FONT_SMALL);
+
+    // The coordinates define the left starting point of the text
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_INVERTED) {
+        display->fillRect(0 + x, 0 + y, x + display->getWidth(), y + FONT_HEIGHT_SMALL);
+        display->setColor(BLACK);
+    }
+
+    char batStr[20];
+    if (powerStatus->getHasBattery()) {
+        int batV = powerStatus->getBatteryVoltageMv() / 1000;
+        int batCv = (powerStatus->getBatteryVoltageMv() % 1000) / 10;
+
+        snprintf(batStr, sizeof(batStr), "B %01d.%02dV %3d%% %c%c", batV, batCv, powerStatus->getBatteryChargePercent(),
+                 powerStatus->getIsCharging() ? '+' : ' ', powerStatus->getHasUSB() ? 'U' : ' ');
+
+        // Line 1
+        display->drawString(x, y, batStr);
+        if (config.display.heading_bold)
+            display->drawString(x + 1, y, batStr);
+    } else {
+        // Line 1
+        display->drawString(x, y, "USB");
+        if (config.display.heading_bold)
+            display->drawString(x + 1, y, "USB");
+    }
+
+    //    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, true);
+
+    //    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode), y, mode);
+    //    if (config.display.heading_bold)
+    //        display->drawString(x + SCREEN_WIDTH - display->getStringWidth(mode) - 1, y, mode);
+
+    uint32_t currentMillis = millis();
+    uint32_t seconds = currentMillis / 1000;
+    uint32_t minutes = seconds / 60;
+    uint32_t hours = minutes / 60;
+    uint32_t days = hours / 24;
+    // currentMillis %= 1000;
+    // seconds %= 60;
+    // minutes %= 60;
+    // hours %= 24;
+
+    // Show uptime as days, hours, minutes OR seconds
+    std::string uptime = UIRenderer::drawTimeDelta(days, hours, minutes, seconds);
+
+    // Line 1 (Still)
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
+    if (config.display.heading_bold)
+        display->drawString(x - 1 + SCREEN_WIDTH - display->getStringWidth(uptime.c_str()), y, uptime.c_str());
+
+    display->setColor(WHITE);
+
+    // Setup string to assemble analogClock string
+    std::string analogClock = "";
+
+    uint32_t rtc_sec = getValidTime(RTCQuality::RTCQualityDevice, true); // Display local timezone
+    if (rtc_sec > 0) {
+        long hms = rtc_sec % SEC_PER_DAY;
+        // hms += tz.tz_dsttime * SEC_PER_HOUR;
+        // hms -= tz.tz_minuteswest * SEC_PER_MIN;
+        // mod `hms` to ensure in positive range of [0...SEC_PER_DAY)
+        hms = (hms + SEC_PER_DAY) % SEC_PER_DAY;
+
+        // Tear apart hms into h:m:s
+        int hour = hms / SEC_PER_HOUR;
+        int min = (hms % SEC_PER_HOUR) / SEC_PER_MIN;
+        int sec = (hms % SEC_PER_HOUR) % SEC_PER_MIN; // or hms % SEC_PER_MIN
+
+        char timebuf[12];
+
+        if (config.display.use_12h_clock) {
+            std::string meridiem = "am";
+            if (hour >= 12) {
+                if (hour > 12)
+                    hour -= 12;
+                meridiem = "pm";
+            }
+            if (hour == 00) {
+                hour = 12;
+            }
+            snprintf(timebuf, sizeof(timebuf), "%d:%02d:%02d%s", hour, min, sec, meridiem.c_str());
+        } else {
+            snprintf(timebuf, sizeof(timebuf), "%02d:%02d:%02d", hour, min, sec);
+        }
+        analogClock += timebuf;
+    }
+
+    // Line 2
+    display->drawString(x, y + FONT_HEIGHT_SMALL * 1, analogClock.c_str());
+
+    // Display Channel Utilization
+    char chUtil[13];
+    snprintf(chUtil, sizeof(chUtil), "ChUtil %2.0f%%", airTime->channelUtilizationPercent());
+    display->drawString(x + SCREEN_WIDTH - display->getStringWidth(chUtil), y + FONT_HEIGHT_SMALL * 1, chUtil);
+
+#if HAS_GPS
+    if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) {
+        // Line 3
+        if (config.display.gps_format !=
+            meshtastic_Config_DisplayConfig_GpsCoordinateFormat_DMS) // if DMS then don't draw altitude
+            UIRenderer::drawGpsAltitude(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
+
+        // Line 4
+        UIRenderer::drawGpsCoordinates(display, x, y + FONT_HEIGHT_SMALL * 3, gpsStatus);
+    } else {
+        UIRenderer::drawGpsPowerStatus(display, x, y + FONT_HEIGHT_SMALL * 2, gpsStatus);
+    }
+#endif
+/* Display a heartbeat pixel that blinks every time the frame is redrawn */
+#ifdef SHOW_REDRAWS
+    if (heartbeat)
+        display->setPixel(0, 0);
+    heartbeat = !heartbeat;
+#endif
+}
+
+// Trampoline functions for DebugInfo class access
+void drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    drawFrame(display, state, x, y);
+}
+
+void drawDebugInfoSettingsTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    drawFrameSettings(display, state, x, y);
+}
+
+void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    drawFrameWiFi(display, state, x, y);
+}
+
+// ****************************
+// * LoRa Focused Screen      *
+// ****************************
+void drawLoRaFocused(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->clear();
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    display->setFont(FONT_SMALL);
+    int line = 1;
+
+    // === Set Title
+    const char *titleStr = (SCREEN_WIDTH > 128) ? "LoRa Info" : "LoRa";
+
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr);
+
+    // === First Row: Region / BLE Name ===
+    graphics::UIRenderer::drawNodes(display, x, getTextPositions(display)[line] + 2, nodeStatus, 0, true, "");
+
+    uint8_t dmac[6];
+    char shortnameble[35];
+    getMacAddr(dmac);
+    snprintf(screen->ourId, sizeof(screen->ourId), "%02x%02x", dmac[4], dmac[5]);
+    snprintf(shortnameble, sizeof(shortnameble), "BLE: %s", screen->ourId);
+    int textWidth = display->getStringWidth(shortnameble);
+    int nameX = (SCREEN_WIDTH - textWidth);
+    display->drawString(nameX, getTextPositions(display)[line++], shortnameble);
+
+    // === Second Row: Radio Preset ===
+    auto mode = DisplayFormatters::getModemPresetDisplayName(config.lora.modem_preset, false);
+    char regionradiopreset[25];
+    const char *region = myRegion ? myRegion->name : NULL;
+    if (region != nullptr) {
+        snprintf(regionradiopreset, sizeof(regionradiopreset), "%s/%s", region, mode);
+    }
+    textWidth = display->getStringWidth(regionradiopreset);
+    nameX = (SCREEN_WIDTH - textWidth) / 2;
+    display->drawString(nameX, getTextPositions(display)[line++], regionradiopreset);
+
+    // === Third Row: Frequency / ChanNum ===
+    char frequencyslot[35];
+    char freqStr[16];
+    float freq = RadioLibInterface::instance->getFreq();
+    snprintf(freqStr, sizeof(freqStr), "%.3f", freq);
+    if (config.lora.channel_num == 0) {
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq: %smhz", freqStr);
+    } else {
+        snprintf(frequencyslot, sizeof(frequencyslot), "Freq/Ch: %smhz (%d)", freqStr, config.lora.channel_num);
+    }
+    size_t len = strlen(frequencyslot);
+    if (len >= 4 && strcmp(frequencyslot + len - 4, " (0)") == 0) {
+        frequencyslot[len - 4] = '\0'; // Remove the last three characters
+    }
+    textWidth = display->getStringWidth(frequencyslot);
+    nameX = (SCREEN_WIDTH - textWidth) / 2;
+    display->drawString(nameX, getTextPositions(display)[line++], frequencyslot);
+
+    // === Fourth Row: Channel Utilization ===
+    const char *chUtil = "ChUtil:";
+    char chUtilPercentage[10];
+    snprintf(chUtilPercentage, sizeof(chUtilPercentage), "%2.0f%%", airTime->channelUtilizationPercent());
+
+    int chUtil_x = (SCREEN_WIDTH > 128) ? display->getStringWidth(chUtil) + 10 : display->getStringWidth(chUtil) + 5;
+    int chUtil_y = getTextPositions(display)[line] + 3;
+
+    int chutil_bar_width = (SCREEN_WIDTH > 128) ? 100 : 50;
+    int chutil_bar_height = (SCREEN_WIDTH > 128) ? 12 : 7;
+    int extraoffset = (SCREEN_WIDTH > 128) ? 6 : 3;
+    int chutil_percent = airTime->channelUtilizationPercent();
+
+    int centerofscreen = SCREEN_WIDTH / 2;
+    int total_line_content_width = (chUtil_x + chutil_bar_width + display->getStringWidth(chUtilPercentage) + extraoffset) / 2;
+    int starting_position = centerofscreen - total_line_content_width;
+
+    display->drawString(starting_position, getTextPositions(display)[line++], chUtil);
+
+    // Force 56% or higher to show a full 100% bar, text would still show related percent.
+    if (chutil_percent >= 61) {
+        chutil_percent = 100;
+    }
+
+    // Weighting for nonlinear segments
+    float milestone1 = 25;
+    float milestone2 = 40;
+    float weight1 = 0.45; // Weight for 0–25%
+    float weight2 = 0.35; // Weight for 25–40%
+    float weight3 = 0.20; // Weight for 40–100%
+    float totalWeight = weight1 + weight2 + weight3;
+
+    int seg1 = chutil_bar_width * (weight1 / totalWeight);
+    int seg2 = chutil_bar_width * (weight2 / totalWeight);
+    int seg3 = chutil_bar_width * (weight3 / totalWeight);
+
+    int fillRight = 0;
+
+    if (chutil_percent <= milestone1) {
+        fillRight = (seg1 * (chutil_percent / milestone1));
+    } else if (chutil_percent <= milestone2) {
+        fillRight = seg1 + (seg2 * ((chutil_percent - milestone1) / (milestone2 - milestone1)));
+    } else {
+        fillRight = seg1 + seg2 + (seg3 * ((chutil_percent - milestone2) / (100 - milestone2)));
+    }
+
+    // Draw outline
+    display->drawRect(starting_position + chUtil_x, chUtil_y, chutil_bar_width, chutil_bar_height);
+
+    // Fill progress
+    if (fillRight > 0) {
+        display->fillRect(starting_position + chUtil_x, chUtil_y, fillRight, chutil_bar_height);
+    }
+
+    display->drawString(starting_position + chUtil_x + chutil_bar_width + extraoffset, getTextPositions(display)[4],
+                        chUtilPercentage);
+}
+
+// ****************************
+// *      Memory Screen       *
+// ****************************
+void drawMemoryUsage(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
+{
+    display->clear();
+    display->setFont(FONT_SMALL);
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+
+    // === Set Title
+    const char *titleStr = "System";
+
+    // === Header ===
+    graphics::drawCommonHeader(display, x, y, titleStr);
+
+    // === Layout ===
+    int line = 1;
+    const int barHeight = 6;
+    const int labelX = x;
+    const int barsOffset = (SCREEN_WIDTH > 128) ? 24 : 0;
+    const int barX = x + 40 + barsOffset;
+
+    auto drawUsageRow = [&](const char *label, uint32_t used, uint32_t total, bool isHeap = false) {
+        if (total == 0)
+            return;
+
+        int percent = (used * 100) / total;
+
+        char combinedStr[24];
+        if (SCREEN_WIDTH > 128) {
+            snprintf(combinedStr, sizeof(combinedStr), "%s%3d%%  %u/%uKB", (percent > 80) ? "! " : "", percent, used / 1024,
+                     total / 1024);
+        } else {
+            snprintf(combinedStr, sizeof(combinedStr), "%s%3d%%", (percent > 80) ? "! " : "", percent);
+        }
+
+        int textWidth = display->getStringWidth(combinedStr);
+        int adjustedBarWidth = SCREEN_WIDTH - barX - textWidth - 6;
+        if (adjustedBarWidth < 10)
+            adjustedBarWidth = 10;
+
+        int fillWidth = (used * adjustedBarWidth) / total;
+
+        // Label
+        display->setTextAlignment(TEXT_ALIGN_LEFT);
+        display->drawString(labelX, getTextPositions(display)[line], label);
+
+        // Bar
+        int barY = getTextPositions(display)[line] + (FONT_HEIGHT_SMALL - barHeight) / 2;
+        display->setColor(WHITE);
+        display->drawRect(barX, barY, adjustedBarWidth, barHeight);
+
+        display->fillRect(barX, barY, fillWidth, barHeight);
+        display->setColor(WHITE);
+
+        // Value string
+        display->setTextAlignment(TEXT_ALIGN_RIGHT);
+        display->drawString(SCREEN_WIDTH - 2, getTextPositions(display)[line], combinedStr);
+    };
+
+    // === Memory values ===
+    uint32_t heapUsed = memGet.getHeapSize() - memGet.getFreeHeap();
+    uint32_t heapTotal = memGet.getHeapSize();
+
+    uint32_t psramUsed = memGet.getPsramSize() - memGet.getFreePsram();
+    uint32_t psramTotal = memGet.getPsramSize();
+
+    uint32_t flashUsed = 0, flashTotal = 0;
+#ifdef ESP32
+    flashUsed = FSCom.usedBytes();
+    flashTotal = FSCom.totalBytes();
+#endif
+
+    uint32_t sdUsed = 0, sdTotal = 0;
+    bool hasSD = false;
+    /*
+    #ifdef HAS_SDCARD
+        hasSD = SD.cardType() != CARD_NONE;
+        if (hasSD) {
+            sdUsed = SD.usedBytes();
+            sdTotal = SD.totalBytes();
+        }
+    #endif
+    */
+    // === Draw memory rows
+    drawUsageRow("Heap:", heapUsed, heapTotal, true);
+#ifdef ESP32
+    if (psramUsed > 0) {
+        line += 1;
+        drawUsageRow("PSRAM:", psramUsed, psramTotal);
+    }
+    if (flashTotal > 0) {
+        line += 1;
+        drawUsageRow("Flash:", flashUsed, flashTotal);
+    }
+#endif
+    if (hasSD && sdTotal > 0) {
+        line += 1;
+        drawUsageRow("SD:", sdUsed, sdTotal);
+    }
+
+    display->setTextAlignment(TEXT_ALIGN_LEFT);
+    // System Uptime
+    if (line < 2) {
+        line += 1;
+    }
+    line += 1;
+    char appversionstr[35];
+    snprintf(appversionstr, sizeof(appversionstr), "Ver.: %s", optstr(APP_VERSION));
+    int textWidth = display->getStringWidth(appversionstr);
+    int nameX = (SCREEN_WIDTH - textWidth) / 2;
+    display->drawString(nameX, getTextPositions(display)[line], appversionstr);
+
+    if (SCREEN_HEIGHT > 64 || (SCREEN_HEIGHT <= 64 && line < 4)) { // Only show uptime if the screen can show it
+        line += 1;
+        char uptimeStr[32] = "";
+        uint32_t uptime = millis() / 1000;
+        uint32_t days = uptime / 86400;
+        uint32_t hours = (uptime % 86400) / 3600;
+        uint32_t mins = (uptime % 3600) / 60;
+        // Show as "Up: 2d 3h", "Up: 5h 14m", or "Up: 37m"
+        if (days)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %ud %uh", days, hours);
+        else if (hours)
+            snprintf(uptimeStr, sizeof(uptimeStr), " Up: %uh %um", hours, mins);
+        else
+            snprintf(uptimeStr, sizeof(uptimeStr), " Uptime: %um", mins);
+        textWidth = display->getStringWidth(uptimeStr);
+        nameX = (SCREEN_WIDTH - textWidth) / 2;
+        display->drawString(nameX, getTextPositions(display)[line], uptimeStr);
+    }
+}
+} // namespace DebugRenderer
+} // namespace graphics
+#endif