rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-22 10:42:49 +00:00
Code Issues Packages Projects Releases Wiki Activity

pinelora WIP

Browse Source
This commit is contained in:
Kevin Hester
2021-05-01 11:27:37 +08:00
parent 8ec73e653b
commit 4c1b7d4840
9 changed files with 53 additions and 15 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
src/mesh/SX1262Interface.cpp
View File

@@ -59,6 +59,30 @@ bool SX1262Interface::init()
res = lora.setDio2AsRfSwitch(false);
#endif
#if 0
// Read/write a register we are not using (only used for FSK mode) to test SPI comms
uint8_t crcLSB = 0;
int err = lora.readRegister(SX126X_REG_CRC_POLYNOMIAL_LSB, &crcLSB, 1);
if(err != ERR_NONE)
RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
//if(crcLSB != 0x0f)
// RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
crcLSB = 0x5a;
err = lora.writeRegister(SX126X_REG_CRC_POLYNOMIAL_LSB, &crcLSB, 1);
if(err != ERR_NONE)
RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
err = lora.readRegister(SX126X_REG_CRC_POLYNOMIAL_LSB, &crcLSB, 1);
if(err != ERR_NONE)
RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
if(crcLSB != 0x5a)
RECORD_CRITICALERROR(CriticalErrorCode_SX1262Failure);
// If we got this far register accesses (and therefore SPI comms) are good
#endif
if (res == ERR_NONE)
res = lora.setCRC(SX126X_LORA_CRC_ON);
@@ -78,15 +102,15 @@ bool SX1262Interface::reconfigure()
// configure publicly accessible settings
int err = lora.setSpreadingFactor(sf);
if (err != ERR_NONE)
recordCriticalError(CriticalErrorCode_InvalidRadioSetting);
RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
err = lora.setBandwidth(bw);
if (err != ERR_NONE)
recordCriticalError(CriticalErrorCode_InvalidRadioSetting);
RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
err = lora.setCodingRate(cr);
if (err != ERR_NONE)
recordCriticalError(CriticalErrorCode_InvalidRadioSetting);
RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
// Hmm - seems to lower SNR when the signal levels are high. Leaving off for now...
err = lora.setRxGain(true);
@@ -103,7 +127,7 @@ bool SX1262Interface::reconfigure()
err = lora.setFrequency(freq);
if (err != ERR_NONE)
recordCriticalError(CriticalErrorCode_InvalidRadioSetting);
RECORD_CRITICALERROR(CriticalErrorCode_InvalidRadioSetting);
if (power > 22) // This chip has lower power limits than some
power = 22;