rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-06 18:08:00 +00:00
Code Issues Packages Projects Releases Wiki Activity

Initial support for HT-VME290, sleep fixes for HT-VME213 (#4334)

Browse Source 
* Fix I2C pindefs

* Initial driver testing for HT-VME290

* E-Ink full refresh after canned message pop up

* Tidy variant folders

* Clean ESP32 cpuDeepSleep method
Merge sections, and remove the random assortment of gpio holds left behind.

* Enable 32kHz in variant.h

* Orient E290 with LoRa antenna facing up

* Revert "Clean ESP32 cpuDeepSleep method"

This reverts commit cb8ee508ec2d6bc27a8e228021fd1efbd034c4a0.

* Reduce deep-sleep current for VME213 (non-intrusive)
Originally I made an attempt at tidying up the cpuDeepSleep method, but have reverted that. New commit makes only the changes needed to support VME213. Don't really want the headache of breaking sleep for other variants, especially when this PR is just about implementing new boards.

* Update lib_deps; remove board_level extra
This commit is contained in:
todd-herbert
2024-08-02 14:03:59 +12:00
committed by GitHub
parent d2ea430a3e
commit 4b4c1669a9
11 changed files with 121 additions and 62 deletions
Download Patch File Download Diff File Expand all files Collapse all files

36
variants/heltec_vision_master_e290/variant.h
View File

@@ -1,48 +1,42 @@
// #define LED_PIN 18
#define BUTTON_PIN 0
// Enable bus for external periherals
// I2C
#define I2C_SDA SDA
#define I2C_SCL SCL
// Display (E-Ink)
#define USE_EINK
/*
* eink display pins
*/
#define PIN_EINK_CS 3
#define PIN_EINK_BUSY 5
#define PIN_EINK_BUSY 6
#define PIN_EINK_DC 4
#define PIN_EINK_RES 5
#define PIN_EINK_SCLK 2
#define PIN_EINK_MOSI 1
/*
* SPI interfaces
*/
// SPI
#define SPI_INTERFACES_COUNT 2
#define PIN_SPI_MISO 11
#define PIN_SPI_MOSI 10
#define PIN_SPI_SCK 9
#define PIN_SPI_MISO 10 // MISO
#define PIN_SPI_MOSI 11 // MOSI
#define PIN_SPI_SCK 9 // SCK
#define VEXT_ENABLE 18 // powers the e-ink display
#define VEXT_ON_VALUE 1
#define BUTTON_PIN 0
// Power
#define VEXT_ENABLE 18 // Powers the E-Ink display only
#define VEXT_ON_VALUE HIGH
#define ADC_CTRL 46
#define ADC_CTRL_ENABLED HIGH
#define BATTERY_PIN 7
#define ADC_CHANNEL ADC1_GPIO7_CHANNEL
#define ADC_MULTIPLIER 4.9 * 1.03
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // Voltage divider output is quite high
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5
#define HAS_32768HZ
// LoRa
#define USE_SX1262
#define LORA_DIO0 -1 // a No connect on the SX1262 module
#define LORA_DIO0 RADIOLIB_NC // a No connect on the SX1262 module
#define LORA_RESET 12
#define LORA_DIO1 14 // SX1262 IRQ
#define LORA_DIO2 13 // SX1262 BUSY
#define LORA_DIO3 // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#define LORA_SCK 9
#define LORA_MISO 11