rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-22 10:42:49 +00:00
Code Issues Packages Projects Releases Wiki Activity

Portduino work (#3049)

Browse Source 
* Move to Portduino's getMacAddr()

* Add ST7735/S screen support

* Push Raspbian support into native target

* Remove latent pigpio references.

* CardKB defensive programming

* Adds configurable spidev

* Fixes to build on Fedora 40

* ENUMs are not #defines. Pull latest portduino

* Add more configuration options for SPI displays

* Add config.yaml option to set DIO3_TCXO_VOLTAGE

* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.

* Adds TXen and RXen pins to portduino

* Add -c --config options to specify config file

* Fail when a specified config file is unavailable

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
This commit is contained in:
Jonathan Bennett
2024-01-12 02:00:31 -06:00
committed by GitHub
parent 7e53a96ee5
commit 4a867c81c0
30 changed files with 279 additions and 250 deletions
Download Patch File Download Diff File Expand all files Collapse all files

32
variants/portduino/variant.h
View File

@@ -1,33 +1,3 @@
#if defined(ARCH_RASPBERRY_PI)
#define HAS_WIRE 1
#define HAS_SCREEN 1
#define CANNED_MESSAGE_MODULE_ENABLE 1
#else // Pine64 mode.
// Pine64 uses a common pinout for their SX1262 vs RF95 modules - both can be enabled and we will probe at runtime for RF95 and if
// not found then probe for SX1262. Currently the RF95 code is disabled because I think the RF95 module won't need to ship.
// #define USE_RF95
#define USE_SX1262
// Fake SPI device selections
#define LORA_SCK 5
#define LORA_MISO 19
#define LORA_MOSI 27
#define LORA_CS RADIOLIB_NC // the ch341f spi controller does CS for us
#define LORA_DIO0 26 // a No connect on the SX1262 module
#define LORA_RESET 14
#define LORA_DIO1 33 // SX1262 IRQ, called DIO0 on pinelora schematic, pin 7 on ch341f "ack" - FIXME, enable hwints in linux
#define LORA_DIO2 32 // SX1262 BUSY, actually connected to "DIO5" on pinelora schematic, pin 8 on ch341f "slct"
#define LORA_DIO3 RADIOLIB_NC // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
#ifdef USE_SX1262
#define SX126X_CS 20 // CS0 on pinelora schematic, hooked to gpio D0 on ch341f
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_DIO2_AS_RF_SWITCH
#endif
#endif
#define CANNED_MESSAGE_MODULE_ENABLE 1