Portduino work (#3049)

* Move to Portduino's getMacAddr()

* Add ST7735/S screen support

* Push Raspbian support into native target

* Remove latent pigpio references.

* CardKB defensive programming

* Adds configurable spidev

* Fixes to build on Fedora 40

* ENUMs are not #defines. Pull latest portduino

* Add more configuration options for SPI displays

* Add config.yaml option to set DIO3_TCXO_VOLTAGE

* change tft clear() to fillScreen()
Maintains compatability with ESPI driver.

* Adds TXen and RXen pins to portduino

* Add -c --config options to specify config file

* Fail when a specified config file is unavailable

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>

bin/config-dist.yaml

@@ -14,6 +14,12 @@ Lora:
 #  IRQ: 17
 #  Reset: 22
 
+#  Module: sx1262  # pinedio
+#  CS: 0
+#  IRQ: 10
+#  Busy: 11
+#  spidev: spidev0.1
+
 #  Module: RF95  # Adafruit RFM9x
 #  Reset: 25
 #  CS: 7
@@ -31,10 +37,19 @@ Lora:
 #  Busy: 20
 #  Reset: 18
 
+#  DIO3_TCXO_VOLTAGE: true  # the Waveshare Core1262 and others are known to need this setting
+
+#  TXen: x  # TX and RX enable pins
+#  RXen: x
+
 ### Set gpio chip to use in /dev/. Defaults to 0.
 ### Notably the Raspberry Pi 5 puts the GPIO header on gpiochip4
 #  gpiochip: 4
 
+### Specify the SPI device to use in /dev/. Defaults to spidev0.0
+### Some devices, like the pinedio, may require spidev0.1 as a workaround.
+#  spidev: spidev0.0
+
 ### Define GPIO buttons here:
 
 GPIO:
@@ -58,6 +73,18 @@ Display:
 #  Height: 320
 #  Reset: 27
 #  Rotate: true
+#  Invert: true
+
+### Waveshare 1.44inch LCD HAT
+#  Panel: ST7735S
+#  CS: 8         #Chip Select
+#  DC: 25        # Data/Command pin
+#  Backlight: 24
+#  Width: 128
+#  Height: 128
+#  Reset: 27
+#  OffsetX: 0
+#  OffsetY: 0
 
 Touchscreen:
 #  Module: XPT2046