ESP32s3: Migrate variants to new structure (#7343)

variants/esp32s3/picomputer-s3/pins_arduino.h

@@ -0,0 +1,22 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+// Default SPI
+static const uint8_t MISO = 39;
+static const uint8_t SCK = 21;
+static const uint8_t MOSI = 38;
+static const uint8_t SS = 40;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/picomputer-s3/platformio.ini

@@ -0,0 +1,56 @@
+[env:picomputer-s3]
+extends = esp32s3_base
+board = bpi_picow_esp32_s3
+board_check = true
+board_build.partitions = default_8MB.csv
+;OpenOCD flash method
+;upload_protocol = esp-builtin
+;Normal method
+upload_protocol = esptool
+
+build_flags = 
+  ${esp32s3_base.build_flags}
+  -DPICOMPUTER_S3
+  -I variants/esp32s3/picomputer-s3
+
+lib_deps = 
+  ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@^1.2.0
+
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+
+
+[env:picomputer-s3-tft]
+extends = env:picomputer-s3
+
+build_flags =
+  ${env:picomputer-s3.build_flags}
+  -D INPUTDRIVER_MATRIX_TYPE=1
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D USE_SX127x
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D RAM_SIZE=1560
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D DISPLAY_SIZE=320x240 ; landscape mode
+  -D LGFX_DRIVER=LGFX_PICOMPUTER_S3
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_PICOMPUTER_S3.h\"
+  -D VIEW_320x240
+;  -D USE_DOUBLE_BUFFER
+  -D USE_PACKET_API
+
+lib_deps =
+  ${env:picomputer-s3.lib_deps}
+  ${device-ui_base.lib_deps}

variants/esp32s3/picomputer-s3/variant.h

@@ -0,0 +1,65 @@
+#undef GPS_RX_PIN
+#undef GPS_TX_PIN
+
+#define BUTTON_PIN 0
+
+#define PIN_BUZZER 43
+
+#define HAS_WIRE 0
+
+#define BATTERY_PIN ADC1_CHANNEL_1_GPIO_NUM // 2
+// A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+// ratio of voltage divider = 3.0 (R11=200k, R7=100k)
+#define ADC_MULTIPLIER 3.1 // 3.0 with correction of display undervoltage.
+#define ADC_CHANNEL ADC1_GPIO2_CHANNEL
+
+#define USE_RF95 // RFM95/SX127x
+
+#define LORA_SCK SCK   // 21
+#define LORA_MISO MISO // 39
+#define LORA_MOSI MOSI // 38
+#define LORA_CS SS     // 40
+#define LORA_RESET RADIOLIB_NC
+
+// per SX1276_Receive_Interrupt/utilities.h
+#define LORA_DIO0 10
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC
+
+// Default SPI1 will be mapped to the display
+#define ST7789_SDA 4
+#define ST7789_SCK 3
+#define ST7789_CS 6
+#define ST7789_RS 1
+#define ST7789_BL 5
+
+#define ST7789_RESET -1
+#define ST7789_MISO -1
+#define ST7789_BUSY -1
+#define ST7789_SPI_HOST SPI3_HOST
+#define TFT_BL 5
+#define SPI_FREQUENCY 40000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 320
+#define TFT_WIDTH 240
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_ROTATE
+#define SCREEN_TRANSITION_FRAMERATE 5
+
+// Picomputer gets a white on black display
+#define TFT_MESH_OVERRIDE COLOR565(255, 255, 255)
+
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+#define INPUTBROKER_MATRIX_TYPE 1
+
+#define KEYS_COLS                                                                                                                \
+    {                                                                                                                            \
+        44, 47, 17, 15, 13, 41                                                                                                   \
+    }
+#define KEYS_ROWS                                                                                                                \
+    {                                                                                                                            \
+        12, 16, 42, 18, 14, 7                                                                                                    \
+    }