rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-24 03:31:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

ESP32s3: Migrate variants to new structure (#7343)

Browse Source
This commit is contained in:
Austin
2025-07-20 17:47:37 -04:00
committed by GitHub
parent b851b15a73
commit 475cfe4af2
127 changed files with 126 additions and 101 deletions
Download Patch File Download Diff File Expand all files Collapse all files

26
variants/esp32s3/diy/my_esp32s3_diy_eink/pins_arduino.h Normal file
View File

@@ -0,0 +1,26 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// The default Wire will be mapped to PMU and RTC
static const uint8_t SDA = 18;
static const uint8_t SCL = 17;
// Default SPI will be mapped to Radio
static const uint8_t MISO = 3;
static const uint8_t SCK = 5;
static const uint8_t MOSI = 6;
static const uint8_t SS = 7;
// #define SPI_MOSI (11)
// #define SPI_SCK (14)
// #define SPI_MISO (2)
// #define SPI_CS (13)
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */

28
variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini Normal file
View File

@@ -0,0 +1,28 @@
[env:my-esp32s3-diy-eink]
board_level = extra
extends = esp32s3_base
board = my_esp32s3_diy_eink
board_build.arduino.memory_type = dio_opi
board_build.mcu = esp32s3
board_build.f_cpu = 240000000L
upload_protocol = esptool
;upload_port = /dev/ttyACM1
upload_speed = 921600
lib_deps =
${esp32_base.lib_deps}
zinggjm/GxEPD2@^1.6.2
adafruit/Adafruit NeoPixel @ ^1.12.0
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
build_flags =
${esp32_base.build_flags}
-D PRIVATE_HW
-I variants/esp32s3/diy/my_esp32s3_diy_eink
-Dmy
-DEINK_DISPLAY_MODEL=GxEPD2_290_T5D
-DEINK_WIDTH=296
-DEINK_HEIGHT=128
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0

60
variants/esp32s3/diy/my_esp32s3_diy_eink/variant.h Normal file
View File

@@ -0,0 +1,60 @@
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
// #define HAS_SCREEN 0
// #define HAS_SDCARD
// #define SDCARD_USE_SPI1
// #define USE_SSD1306
#define I2C_SDA 18 // 1 // I2C pins for this board
#define I2C_SCL 17 // 2
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 38 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP
// #define USE_RF95 // RFM95/SX127x
// #define USE_SX1262
#define USE_SX1280
#define LORA_MISO 3
#define LORA_SCK 5
#define LORA_MOSI 6
#define LORA_CS 7
#define LORA_RESET 8
#define LORA_DIO1 16
#ifdef USE_SX1262
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 15
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN 4
#define SX126X_TXEN 9
#endif
#ifdef USE_SX1280
#define SX128X_CS LORA_CS
#define SX128X_DIO1 LORA_DIO1
#define SX128X_BUSY 15
#define SX128X_RESET LORA_RESET
#endif
#define USE_EINK
/*
* eink display pins
*/
#define PIN_EINK_CS 13
#define PIN_EINK_BUSY 2
#define PIN_EINK_DC 1
#define PIN_EINK_RES (-1)
#define PIN_EINK_SCLK 5
#define PIN_EINK_MOSI 6

26
variants/esp32s3/diy/my_esp32s3_diy_oled/pins_arduino.h Normal file
View File

@@ -0,0 +1,26 @@
#ifndef Pins_Arduino_h
#define Pins_Arduino_h
#include <stdint.h>
#define USB_VID 0x303a
#define USB_PID 0x1001
// The default Wire will be mapped to PMU and RTC
static const uint8_t SDA = 18;
static const uint8_t SCL = 17;
// Default SPI will be mapped to Radio
static const uint8_t MISO = 3;
static const uint8_t SCK = 5;
static const uint8_t MOSI = 6;
static const uint8_t SS = 7;
// #define SPI_MOSI (11)
// #define SPI_SCK (14)
// #define SPI_MISO (2)
// #define SPI_CS (13)
// #define SDCARD_CS SPI_CS
#endif /* Pins_Arduino_h */

23
variants/esp32s3/diy/my_esp32s3_diy_oled/platformio.ini Normal file
View File

@@ -0,0 +1,23 @@
[env:my-esp32s3-diy-oled]
board_level = extra
extends = esp32s3_base
board = my-esp32s3-diy-oled
board_build.arduino.memory_type = dio_opi
board_build.mcu = esp32s3
board_build.f_cpu = 240000000L
upload_protocol = esptool
;upload_port = /dev/ttyACM0
upload_speed = 921600
lib_deps =
${esp32_base.lib_deps}
adafruit/Adafruit NeoPixel @ ^1.12.0
build_unflags =
${esp32s3_base.build_unflags}
-DARDUINO_USB_MODE=1
build_flags =
${esp32_base.build_flags}
-D PRIVATE_HW
-I variants/esp32s3/diy/my_esp32s3_diy_oled
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
-DARDUINO_USB_MODE=0

60
variants/esp32s3/diy/my_esp32s3_diy_oled/variant.h Normal file
View File

@@ -0,0 +1,60 @@
#define HAS_GPS 0
#undef GPS_RX_PIN
#undef GPS_TX_PIN
// #define HAS_SCREEN 0
// #define HAS_SDCARD
// #define SDCARD_USE_SPI1
#define USE_SSD1306
#define I2C_SDA 18 // 1 // I2C pins for this board
#define I2C_SCL 17 // 2
// #define LED_PIN 38 // This is a RGB LED not a standard LED
#define HAS_NEOPIXEL // Enable the use of neopixels
#define NEOPIXEL_COUNT 1 // How many neopixels are connected
#define NEOPIXEL_DATA 38 // gpio pin used to send data to the neopixels
#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
#define BUTTON_PIN 0 // This is the BOOT button
#define BUTTON_NEED_PULLUP
// #define USE_RF95 // RFM95/SX127x
// #define USE_SX1262
#define USE_SX1280
#define LORA_MISO 3
#define LORA_SCK 5
#define LORA_MOSI 6
#define LORA_CS 7
#define LORA_RESET 8
#define LORA_DIO1 16
#ifdef USE_SX1262
#define SX126X_CS LORA_CS // FIXME - we really should define LORA_CS instead
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY 15
#define SX126X_RESET LORA_RESET
#define SX126X_RXEN 4
#define SX126X_TXEN 9
#endif
#ifdef USE_SX1280
#define SX128X_CS LORA_CS
#define SX128X_DIO1 LORA_DIO1
#define SX128X_BUSY 15
#define SX128X_RESET LORA_RESET
#endif
// #define USE_EINK
/*
* eink display pins
*/
// #define PIN_EINK_CS 13
// #define PIN_EINK_BUSY 2
// #define PIN_EINK_DC 1
// #define PIN_EINK_RES (-1)
// #define PIN_EINK_SCLK 5
// #define PIN_EINK_MOSI 6

18
variants/esp32s3/diy/t-energy-s3_e22/platformio.ini Normal file
View File

@@ -0,0 +1,18 @@
; NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
[env:t-energy-s3_e22]
extends = esp32s3_base
board = esp32-s3-devkitc-1
board_build.partitions = default_16MB.csv
board_level = extra
board_upload.flash_size = 16MB ;Specify the FLASH capacity as 16MB
board_build.arduino.memory_type = qio_opi ;Enable internal PSRAM
build_unflags =
${esp32s3_base.build_unflags}
-D ARDUINO_USB_MODE=1
build_flags =
${esp32s3_base.build_flags}
-D EBYTE_ESP32_S3
-D BOARD_HAS_PSRAM
-D ARDUINO_USB_MODE=0
-D ARDUINO_USB_CDC_ON_BOOT=1
-I variants/esp32s3/diy/t-energy-s3_e22

46
variants/esp32s3/diy/t-energy-s3_e22/variant.h Normal file
View File

@@ -0,0 +1,46 @@
// NanoVHF T-Energy-S3 + E22(0)-xxxM - DIY
// https://github.com/NanoVHF/Meshtastic-DIY/tree/main/PCB/ESP-32-devkit_EBYTE-E22/Mesh-v1.06-TTGO-T18
// Battery
#define BATTERY_PIN 3
#define ADC_MULTIPLIER 2.0
#define ADC_CHANNEL ADC1_GPIO3_CHANNEL
// Button on NanoVHF PCB
#define BUTTON_PIN 39
// I2C via connectors on NanoVHF PCB
#define I2C_SCL 2
#define I2C_SDA 42
// Screen (disabled)
#define HAS_SCREEN 0 // Assume no screen present by default to prevent crash...
// GPS via T-Energy-S3 onboard connector
#define HAS_GPS 1
#define GPS_TX_PIN 43
#define GPS_RX_PIN 44
// LoRa
#define USE_SX1262 // E22-900M30S, E22-900M22S, and E22-900MM22S (not E220!) use SX1262
#define USE_SX1268 // E22-400M30S, E22-400M33S, E22-400M22S, and E22-400MM22S use SX1268
#define SX126X_MAX_POWER 22 // SX126xInterface.cpp defaults to 22 if not defined, but here we define it for good practice
#define SX126X_DIO3_TCXO_VOLTAGE 1.8 // E22 series TCXO reference voltage is 1.8V
#define SX126X_CS 5 // EBYTE module's NSS pin // FIXME: rename to SX126X_SS
#define SX126X_SCK 6 // EBYTE module's SCK pin
#define SX126X_MOSI 13 // EBYTE module's MOSI pin
#define SX126X_MISO 4 // EBYTE module's MISO pin
#define SX126X_RESET 1 // EBYTE module's NRST pin
#define SX126X_BUSY 48 // EBYTE module's BUSY pin
#define SX126X_DIO1 47 // EBYTE module's DIO1 pin
#define SX126X_TXEN 10 // Schematic connects EBYTE module's TXEN pin to MCU
#define SX126X_RXEN 12 // Schematic connects EBYTE module's RXEN pin to MCU
#define LORA_CS SX126X_CS // Compatibility with variant file configuration structure
#define LORA_SCK SX126X_SCK // Compatibility with variant file configuration structure
#define LORA_MOSI SX126X_MOSI // Compatibility with variant file configuration structure
#define LORA_MISO SX126X_MISO // Compatibility with variant file configuration structure
#define LORA_DIO1 SX126X_DIO1 // Compatibility with variant file configuration structure