Merge branch 'master' into crowpanelV2

2025-12-30 22:50:57 +00:00 · 2025-12-10 13:38:41 +01:00
parent fefce15b1a ee80ec7b68
commit 469abe8dec
149 changed files with 5631 additions and 3902 deletions
--- a/variants/esp32/chatter2/variant.h
+++ b/variants/esp32/chatter2/variant.h
@@ -62,10 +62,12 @@
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_INVERT false
+#define FORCE_LOW_RES 1
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
 #define TFT_BACKLIGHT_ON LOW
+#define USE_TFTDISPLAY 1

 // Battery

--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -0,0 +1,86 @@
+; Common settings for ESP targes, mixin with extends = esp32_base
+[esp32_base]
+extends = arduino_base
+custom_esp32_kind = esp32
+custom_mtjson_part =
+platform =
+  # renovate: datasource=custom.pio depName=platformio/espressif32 packageName=platformio/platform/espressif32
+  platformio/espressif32@6.12.0
+
+extra_scripts =
+  ${env.extra_scripts}
+  pre:extra_scripts/esp32_pre.py
+  extra_scripts/esp32_extra.py
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/nrf52/> -<platform/stm32wl> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp>
+
+upload_speed = 921600
+debug_init_break = tbreak setup
+monitor_filters = esp32_exception_decoder
+
+board_build.filesystem = littlefs
+
+# Remove -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL for low level BLE logging.
+# See library directory for BLE logging possible values: .pio/libdeps/tbeam/NimBLE-Arduino/src/log_common/log_common.h
+# This overrides the BLE logging default of LOG_LEVEL_INFO (1) from: .pio/libdeps/tbeam/NimBLE-Arduino/src/esp_nimble_cfg.h
+build_unflags = -fno-lto
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DLOG_LOCAL_LEVEL=ESP_LOG_DEBUG
+  -DCORE_DEBUG_LEVEL=ARDUHAL_LOG_LEVEL_DEBUG
+  -DMYNEWT_VAL_BLE_HS_LOG_LVL=LOG_LEVEL_CRITICAL
+  -DAXP_DEBUG_PORT=Serial
+  -DCONFIG_BT_NIMBLE_ENABLED
+  -DCONFIG_BT_NIMBLE_MAX_BONDS=6 # default is 3
+  -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2
+  -DCONFIG_BT_NIMBLE_MAX_CCCDS=20
+  -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DSERIAL_HAS_ON_RECEIVE
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DHAS_UDP_MULTICAST=1
+  ;-DDEBUG_HEAP
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
+  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
+  h2zero/NimBLE-Arduino@^1.4.3
+  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
+  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
+  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+lib_ignore = 
+  segger_rtt
+  ESP32 BLE Arduino
+
+; leave this commented out to avoid breaking Windows
+;upload_port = /dev/ttyUSB0
+;monitor_port = /dev/ttyUSB0
+
+; Please don't delete these lines. JM uses them.
+;upload_port = /dev/cu.SLAB_USBtoUART
+;monitor_port = /dev/cu.SLAB_USBtoUART
+
+; customize the partition table
+; http://docs.platformio.org/en/latest/platforms/espressif32.html#partition-tables
+board_build.partitions = partition-table.csv
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -7,7 +7,6 @@ build_src_filter =
 build_flags = 
  ${esp32_base.build_flags}
  -I variants/esp32/m5stack_core
-  -DILI9341_DRIVER
  -DM5STACK
  -DUSER_SETUP_LOADED
  -DTFT_SDA_READ
--- a/variants/esp32/m5stack_core/variant.h
+++ b/variants/esp32/m5stack_core/variant.h
@@ -34,11 +34,13 @@
 #define GPS_RX_PIN 16
 #define GPS_TX_PIN 17

+#define ILI9341_DRIVER
 #define TFT_HEIGHT 240
 #define TFT_WIDTH 320
 #define TFT_OFFSET_X 0
 #define TFT_OFFSET_Y 0
 #define TFT_BUSY -1
+#define USE_TFTDISPLAY 1

 // LCD screens are slow, so slowdown the wipe so it looks better
 #define SCREEN_TRANSITION_FRAMERATE 1 // fps
--- a/variants/esp32/wiphone/variant.h
+++ b/variants/esp32/wiphone/variant.h
@@ -34,6 +34,7 @@
 #define ST7789_SCK 18
 #define ST7789_CS 5
 #define ST7789_RS 26
+#define USE_TFTDISPLAY 1
 // I don't have a 'wiphone' but this I think should not be defined this way (don't set TFT_BL if we don't have a hw way to control
 // it)
 // #define ST7789_BL -1 // EXTENDER_PIN(9)
--- a/variants/esp32c3/esp32c3.ini
+++ b/variants/esp32c3/esp32c3.ini
@@ -0,0 +1,6 @@
+[esp32c3_base]
+extends = esp32_base
+custom_esp32_kind = esp32c3
+
+monitor_speed = 115200
+monitor_filters = esp32_c3_exception_decoder
--- a/variants/esp32c6/esp32c6.ini
+++ b/variants/esp32c6/esp32c6.ini
@@ -0,0 +1,47 @@
+[esp32c6_base]
+extends = esp32_base
+platform =
+  # Do not renovate until we have switched to pioarduino tagged builds
+  https://github.com/Jason2866/platform-espressif32/archive/22faa566df8c789000f8136cd8d0aca49617af55.zip
+build_flags =
+  ${arduino_base.build_flags}
+  -Wall
+  -Wextra
+  -Isrc/platform/esp32
+  -std=c++11
+  -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING
+  -DSERIAL_BUFFER_SIZE=4096
+  -DLIBPAX_ARDUINO
+  -DLIBPAX_WIFI
+  -DLIBPAX_BLE
+  -DMESHTASTIC_EXCLUDE_WEBSERVER
+  ;-DDEBUG_HEAP
+  ; TEMP
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${networking_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
+  lewisxhe/XPowersLib@0.3.2
+  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
+  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} -<mesh/http> 
+
+monitor_speed = 460800
+monitor_filters = esp32_c3_exception_decoder
+
+lib_ignore =
+  NonBlockingRTTTL
+  NimBLE-Arduino
+  libpax
+  
--- a/variants/esp32c6/m5stack_unitc6l/platformio.ini
+++ b/variants/esp32c6/m5stack_unitc6l/platformio.ini
@@ -22,8 +22,6 @@ build_flags =
  -DARDUINO_USB_CDC_ON_BOOT=1
  -DARDUINO_USB_MODE=1
  -D HAS_BLUETOOTH=1
-  -D MESHTASTIC_EXCLUDE_WEBSERVER
-  -D MESHTASTIC_EXCLUDE_MQTT
 	-DCONFIG_BT_NIMBLE_EXT_ADV=1
 	-DCONFIG_BT_NIMBLE_MAX_EXT_ADV_INSTANCES=2
  -D NIMBLE_TWO
--- a/variants/esp32s2/esp32s2.ini
+++ b/variants/esp32s2/esp32s2.ini
@@ -0,0 +1,19 @@
+[esp32s2_base]
+extends = esp32_base
+custom_esp32_kind = esp32s2
+
+build_src_filter = 
+ ${esp32_base.build_src_filter} - <libpax/> -<nimble/> -<mesh/raspihttp>
+
+monitor_speed = 115200
+
+build_flags =
+  ${esp32_base.build_flags} 
+  -DHAS_BLUETOOTH=0
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH
+  
+lib_ignore = 
+  ${esp32_base.lib_ignore} 
+  NimBLE-Arduino
+  libpax
--- a/variants/esp32s3/esp32s3.ini
+++ b/variants/esp32s3/esp32s3.ini
@@ -0,0 +1,5 @@
+[esp32s3_base]
+extends = esp32_base
+custom_esp32_kind = esp32s3
+
+monitor_speed = 115200
--- a/variants/esp32s3/hackaday-communicator/pins_arduino.h
+++ b/variants/esp32s3/hackaday-communicator/pins_arduino.h
@@ -0,0 +1,59 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// static const uint8_t TX = 43;
+// static const uint8_t RX = 44;
+
+static const uint8_t SDA = 47;
+static const uint8_t SCL = 14;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 17;
+static const uint8_t MOSI = 3;
+static const uint8_t MISO = 9;
+static const uint8_t SCK = 8;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 1;
+static const uint8_t T2 = 2;
+static const uint8_t T3 = 3;
+static const uint8_t T4 = 4;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T13 = 13;
+static const uint8_t T14 = 14;
+
+// static const uint8_t BAT_ADC_PIN = 4;
+
+#endif /* Pins_Arduino_h */
--- a/variants/esp32s3/hackaday-communicator/platformio.ini
+++ b/variants/esp32s3/hackaday-communicator/platformio.ini
@@ -0,0 +1,15 @@
+; Hackaday Communicator
+[env:hackaday-communicator]
+extends = esp32s3_base
+board = hackaday-communicator
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_flags = ${esp32s3_base.build_flags} 
+  -D HACKADAY_COMMUNICATOR
+  -D BOARD_HAS_PSRAM
+  -I variants/esp32s3/hackaday-communicator
+
+lib_deps = ${esp32s3_base.lib_deps}
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
--- a/variants/esp32s3/hackaday-communicator/variant.h
+++ b/variants/esp32s3/hackaday-communicator/variant.h
@@ -0,0 +1,61 @@
+#define TFT_BL 2
+#define SPI_FREQUENCY 2000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 142
+#define TFT_WIDTH 428
+#define TFT_OFFSET_X 0
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 0
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define HAS_SCREEN 1
+#define TFT_BLACK 0
+#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+#define GPS_DEFAULT_NOT_PRESENT 1
+// #define GPS_RX_PIN 44
+// #define GPS_TX_PIN 43
+
+// #define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+//  ratio of voltage divider = 2.0 (RD2=100k, RD3=100k)
+// #define ADC_MULTIPLIER 2.11 // 2.0 + 10% for correction of display undervoltage.
+// #define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+
+// keyboard
+#define I2C_SDA 47 // I2C pins for this board
+#define I2C_SCL 14
+// #define KB_POWERON -1                  // must be set to HIGH
+// #define KB_SLAVE_ADDRESS TDECK_KB_ADDR // 0x55
+// #define KB_BL_PIN 46                   // not used for now
+#define KB_INT 13
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+#define TFT_DC 39
+#define TFT_CS 41
+
+// LoRa
+#define USE_SX1262
+
+#define LORA_SCK 8
+#define LORA_MISO 9
+#define LORA_MOSI 3
+#define LORA_CS 17
+
+// #define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 18
+#define LORA_DIO1 16 // SX1262 IRQ
+#define LORA_DIO2 15 // SX1262 BUSY
+// #define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// #define LED_PIN 1
--- a/variants/esp32s3/heltec_v4/variant.h
+++ b/variants/esp32s3/heltec_v4/variant.h
@@ -34,6 +34,9 @@
 #define LORA_PA_EN 2
 #define LORA_PA_TX_EN 46 // enable tx

+#if HAS_TFT
+#define USE_TFTDISPLAY 1
+#endif
 /*
 * GPS pins
 */
--- a/variants/esp32s3/heltec_wireless_tracker/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker/variant.h
@@ -27,6 +27,7 @@
 #define TFT_OFFSET_Y -1
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1

 // pin 3 is Vext on v1.1 - HIGH enables LDO for Vext rail which goes to:
 // GPS UC6580:          GPS V_DET(8), VDD_IO(7), DCDC_IN(21), pulls up RESETN(17), D_SEL(33) and BOOT_MODE(34) through 10kR
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/variant.h
@@ -27,6 +27,8 @@
 #define VTFT_CTRL 46                  // Heltec Tracker needs this pulled low for TFT
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define FORCE_LOW_RES 1
+#define USE_TFTDISPLAY 1

 #define VEXT_ENABLE Vext // active low, powers the oled display and the lora antenna boost
 #define VEXT_ON_VALUE LOW
--- a/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/variant.h
@@ -27,6 +27,7 @@
 #define TFT_INVERT false
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1

 #define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
 #define VEXT_ON_VALUE HIGH
--- a/variants/esp32s3/picomputer-s3/variant.h
+++ b/variants/esp32s3/picomputer-s3/variant.h
@@ -32,6 +32,7 @@
 #define ST7789_CS 6
 #define ST7789_RS 1
 #define ST7789_BL 5
+#define USE_TFTDISPLAY 1

 #define ST7789_RESET -1
 #define ST7789_MISO -1
--- a/variants/esp32s3/seeed-sensecap-indicator/variant.h
+++ b/variants/esp32s3/seeed-sensecap-indicator/variant.h
@@ -37,6 +37,7 @@
 #define TFT_BL 45
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT (6 | IO_EXPANDER)
--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -22,6 +22,7 @@
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
--- a/variants/esp32s3/t-watch-s3/variant.h
+++ b/variants/esp32s3/t-watch-s3/variant.h
@@ -18,6 +18,7 @@
 #define TFT_OFFSET_ROTATION 2
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5 // fps
+#define USE_TFTDISPLAY 1

 #define HAS_TOUCHSCREEN 1
 #define SCREEN_TOUCH_INT 16
--- a/variants/esp32s3/tlora-pager/variant.h
+++ b/variants/esp32s3/tlora-pager/variant.h
@@ -20,6 +20,7 @@
 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+#define USE_TFTDISPLAY 1

 #define I2C_SDA SDA
 #define I2C_SCL SCL
--- a/variants/esp32s3/tlora_t3s3_epaper/platformio.ini
+++ b/variants/esp32s3/tlora_t3s3_epaper/platformio.ini
@@ -13,7 +13,10 @@ build_flags =
  -DEINK_WIDTH=250
  -DEINK_HEIGHT=122
  -DUSE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
-  -DEINK_LIMIT_FASTREFRESH=10          ; How many consecutive fast-refreshes are permitted
+  -DEINK_LIMIT_FASTREFRESH=20          ; How many consecutive fast-refreshes are permitted    //20
+  -DEINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates          //30
+  -DEINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
+  -DEINK_BACKGROUND_USES_FAST          ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.

 lib_deps =
  ${esp32s3_base.lib_deps}
--- a/variants/esp32s3/tracksenger/internal/variant.h
+++ b/variants/esp32s3/tracksenger/internal/variant.h
@@ -28,6 +28,7 @@
 #define TFT_OFFSET_Y -1
 #define SCREEN_TRANSITION_FRAMERATE 3 // fps
 #define DISPLAY_FORCE_SMALL_FONTS
+#define USE_TFTDISPLAY 1

 #define VEXT_ENABLE 3 // active HIGH, powers the lora antenna boost
 #define VEXT_ON_VALUE HIGH
--- a/variants/esp32s3/tracksenger/lcd/variant.h
+++ b/variants/esp32s3/tracksenger/lcd/variant.h
@@ -16,6 +16,7 @@
 #define ST7789_CS 38
 #define ST7789_RS 40
 #define ST7789_BL 21
+#define USE_TFTDISPLAY 1
 // P#define TFT_BL 21 /* V1.1 PCB marking */

 #define ST7789_RESET -1
--- a/variants/esp32s3/unphone/variant.h
+++ b/variants/esp32s3/unphone/variant.h
@@ -36,6 +36,7 @@
 #define TFT_INVERT false
 #define SCREEN_ROTATE true
 #define SCREEN_TRANSITION_FRAMERATE 5
+#define USE_TFTDISPLAY 1

 #define HAS_TOUCHSCREEN 1
 #define USE_XPT2046 1
--- a/variants/native/portduino-buildroot/variant.h
+++ b/variants/native/portduino-buildroot/variant.h
@@ -1,4 +1,5 @@
 #define HAS_SCREEN 1
+#define USE_TFTDISPLAY 1
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE portduino_config.maxtophone
--- a/variants/native/portduino.ini
+++ b/variants/native/portduino.ini
@@ -0,0 +1,58 @@
+; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated).
+[portduino_base]
+platform =
+  # renovate: datasource=git-refs depName=platform-native packageName=https://github.com/meshtastic/platform-native gitBranch=develop
+  https://github.com/meshtastic/platform-native/archive/f566d364204416cdbf298e349213f7d551f793d9.zip
+framework = arduino
+
+build_src_filter = 
+  ${env.build_src_filter} 
+  -<platform/esp32/> 
+  -<nimble/> 
+  -<platform/nrf52/> 
+  -<platform/stm32wl/> 
+  -<platform/rp2xx0>
+  -<mesh/wifi/>
+  -<mesh/http/>
+  +<mesh/raspihttp/>
+  -<mesh/eth/>
+  -<modules/esp32>
+
+lib_deps =
+  ${env.lib_deps}
+  ${networking_base.lib_deps}
+  ${radiolib_base.lib_deps}
+  ${environmental_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
+  lovyan03/LovyanGFX@^1.2.0
+  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
+  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
+	adafruit/Adafruit seesaw Library@1.7.9
+  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
+  https://github.com/RAKWireless/RAK12034-BMX160/archive/dcead07ffa267d3c906e9ca4a1330ab989e957e2.zip
+
+build_flags =
+  ${arduino_base.build_flags}
+  -D ARCH_PORTDUINO
+  -fPIC
+  -Isrc/platform/portduino
+  -DRADIOLIB_EEPROM_UNSUPPORTED
+  -DPORTDUINO_LINUX_HARDWARE
+  -DHAS_UDP_MULTICAST=1
+  -lpthread
+  -lstdc++fs
+  -lbluetooth
+  -lgpiod
+  -lyaml-cpp
+  -li2c
+  -luv
+  -std=gnu17
+  -std=c++17
+
+lib_ignore =
+  Adafruit NeoPixel
+  Adafruit ST7735 and ST7789 Library
+  SD
--- a/variants/native/portduino/platformio.ini
+++ b/variants/native/portduino/platformio.ini
@@ -114,5 +114,5 @@ extends = env:native
 build_flags = -lgcov --coverage -fprofile-abs-path -fsanitize=address ${env:native.build_flags}
 ; https://docs.platformio.org/en/latest/projectconf/sections/env/options/test/test_testing_command.html
 test_testing_command =
-  ${platformio.build_dir}/${this.__env__}/program
+  ${platformio.build_dir}/${this.__env__}/meshtasticd
  -s
--- a/variants/native/portduino/variant.h
+++ b/variants/native/portduino/variant.h
@@ -1,6 +1,7 @@
 #ifndef HAS_SCREEN
 #define HAS_SCREEN 1
 #endif
+#define USE_TFTDISPLAY 1
 #define CANNED_MESSAGE_MODULE_ENABLE 1
 #define HAS_GPS 1
 #define MAX_RX_TOPHONE portduino_config.maxtophone
--- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
@@ -62,17 +62,11 @@ extern "C" {
 /*
 * Buttons
 */
-#define PIN_BUTTON2 (32 + 10)
+#define PIN_BUTTON1 (32 + 10)
+#define PIN_BUTTON2 (32 + 7)
 #define ALT_BUTTON_PIN PIN_BUTTON2
 #define ALT_BUTTON_ACTIVE_LOW true
 #define ALT_BUTTON_ACTIVE_PULLUP true
-#define PIN_BUTTON1 (32 + 7)
-
-// #define PIN_BUTTON1 (0 + 11)
-// #define PIN_BUTTON1 (32 + 7)
-
-// #define BUTTON_CLICK_MS 400
-// #define BUTTON_TOUCH_MS 200

 /*
 * Analog pins
@@ -157,15 +151,15 @@ External serial flash WP25R1635FZUIL0
 #define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
 // Seems to be missing on this new board
 // #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
+#define GPS_RX_PIN (32 + 9) // This is for bits going TOWARDS the CPU

 #define GPS_THREAD_INTERVAL 50

 #define PIN_GPS_SWITCH (32 + 1) // GPS开关判断

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
@@ -203,4 +197,4 @@ External serial flash WP25R1635FZUIL0
 }
 #endif

-#endif
+#endif
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
@@ -78,11 +78,11 @@ extern "C" {
 #define GPS_BAUDRATE 9600
 #define PIN_GPS_RESET 25
 #define PIN_GPS_STANDBY 21
-#define GPS_TX_PIN 20
-#define GPS_RX_PIN 22
+#define GPS_TX_PIN 22
+#define GPS_RX_PIN 20
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
 // Button
 #define BUTTON_PIN 12
 #define BUTTON_PIN_ALT (0 + 12)
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/variant.h
@@ -107,12 +107,12 @@ static const uint8_t A0 = PIN_A0;
 #define PIN_GPS_REINIT (29)
 #define PIN_GPS_STANDBY (30)
 #define PIN_GPS_PPS (31)
-#define GPS_TX_PIN (3)
-#define GPS_RX_PIN (2)
+#define GPS_TX_PIN (2)
+#define GPS_RX_PIN (3)
 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN

 // Secondary UART
 #define PIN_SERIAL2_RX (22)
--- a/variants/nrf52840/canaryone/variant.h
+++ b/variants/nrf52840/canaryone/variant.h
@@ -128,13 +128,13 @@ static const uint8_t A0 = PIN_A0;
 // #define PIN_GPS_WAKE (GPIO_PORT1 + 2) // An output to wake GPS, low means allow sleep, high means force wake
 // Seems to be missing on this new board
 #define PIN_GPS_PPS (GPIO_PORT1 + 4) // Pulse per second input from the GPS
-#define GPS_TX_PIN (GPIO_PORT1 + 9)  // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (GPIO_PORT1 + 8)  // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (GPIO_PORT1 + 8)  // This is for bits going TOWARDS the GPS
+#define GPS_RX_PIN (GPIO_PORT1 + 9)  // This is for bits going TOWARDS the CPU

 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 #define GPS_RESET_PIN (GPIO_PORT1 + 5) // GPS reset pin

--- a/variants/nrf52840/cpp_overrides/lfs_util.h
+++ b/variants/nrf52840/cpp_overrides/lfs_util.h
@@ -0,0 +1,208 @@
+/*
+ * lfs utility functions
+ *
+ * Copyright (c) 2017, Arm Limited. All rights reserved.
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+// MESHTASTIC/@geeksville note: This file is copied from the Adafruit nrf52 arduino lib.  And we use a special -include in
+// nrf52.ini to load it before EVERY file we do this hack because the default definitions for LFS_ASSERT are quite poor and we
+// don't want to fork the adafruit lib (again) and send in a PR that they probably won't merge anyways. This file might break if
+// they ever update lfs.util on their side, in which case we'll need to update this file to match their new version. The version
+// this is a copy from is almost exactly
+// https://github.com/adafruit/Adafruit_nRF52_Arduino/blob/c25d93268a3b9c23e9a1ccfcaf9b208beca624ca/libraries/Adafruit_LittleFS/src/littlefs/lfs_util.h
+
+#ifndef LFS_UTIL_H
+#define LFS_UTIL_H
+
+// Users can override lfs_util.h with their own configuration by defining
+// LFS_CONFIG as a header file to include (-DLFS_CONFIG=lfs_config.h).
+//
+// If LFS_CONFIG is used, none of the default utils will be emitted and must be
+// provided by the config file. To start I would suggest copying lfs_util.h and
+// modifying as needed.
+#ifdef LFS_CONFIG
+#define LFS_STRINGIZE(x) LFS_STRINGIZE2(x)
+#define LFS_STRINGIZE2(x) #x
+#include LFS_STRINGIZE(LFS_CONFIG)
+#else
+
+// System includes
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#ifndef LFS_NO_MALLOC
+#include <stdlib.h>
+#endif
+#ifndef LFS_NO_ASSERT
+#include <assert.h>
+#endif
+
+#if !defined(LFS_NO_DEBUG) || !defined(LFS_NO_WARN) || !defined(LFS_NO_ERROR)
+#include <stdio.h>
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+// Macros, may be replaced by system specific wrappers. Arguments to these
+// macros must not have side-effects as the macros can be removed for a smaller
+// code footprint
+
+// Logging functions
+#ifndef LFS_NO_DEBUG
+
+void logLegacy(const char *level, const char *fmt, ...);
+#define LFS_DEBUG(fmt, ...) logLegacy("DEBUG", "lfs debug:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_DEBUG(fmt, ...)
+#endif
+
+#ifndef LFS_NO_WARN
+#define LFS_WARN(fmt, ...) logLegacy("WARN", "lfs warn:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_WARN(fmt, ...)
+#endif
+
+#ifndef LFS_NO_ERROR
+#define LFS_ERROR(fmt, ...) logLegacy("ERROR", "lfs error:%d: " fmt "\n", __LINE__, __VA_ARGS__)
+#else
+#define LFS_ERROR(fmt, ...)
+#endif
+
+// Runtime assertions
+#ifndef LFS_NO_ASSERT
+#define LFS_ASSERT(test) assert(test)
+#else
+extern void lfs_assert(const char *reason);
+#define LFS_ASSERT(test)                                                                                                         \
+    if (!(test))                                                                                                                 \
+    lfs_assert(#test)
+#endif
+
+// Builtin functions, these may be replaced by more efficient
+// toolchain-specific implementations. LFS_NO_INTRINSICS falls back to a more
+// expensive basic C implementation for debugging purposes
+
+// Min/max functions for unsigned 32-bit numbers
+static inline uint32_t lfs_max(uint32_t a, uint32_t b)
+{
+    return (a > b) ? a : b;
+}
+
+static inline uint32_t lfs_min(uint32_t a, uint32_t b)
+{
+    return (a < b) ? a : b;
+}
+
+// Find the next smallest power of 2 less than or equal to a
+static inline uint32_t lfs_npw2(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return 32 - __builtin_clz(a - 1);
+#else
+    uint32_t r = 0;
+    uint32_t s;
+    a -= 1;
+    s = (a > 0xffff) << 4;
+    a >>= s;
+    r |= s;
+    s = (a > 0xff) << 3;
+    a >>= s;
+    r |= s;
+    s = (a > 0xf) << 2;
+    a >>= s;
+    r |= s;
+    s = (a > 0x3) << 1;
+    a >>= s;
+    r |= s;
+    return (r | (a >> 1)) + 1;
+#endif
+}
+
+// Count the number of trailing binary zeros in a
+// lfs_ctz(0) may be undefined
+static inline uint32_t lfs_ctz(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && defined(__GNUC__)
+    return __builtin_ctz(a);
+#else
+    return lfs_npw2((a & -a) + 1) - 1;
+#endif
+}
+
+// Count the number of binary ones in a
+static inline uint32_t lfs_popc(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && (defined(__GNUC__) || defined(__CC_ARM))
+    return __builtin_popcount(a);
+#else
+    a = a - ((a >> 1) & 0x55555555);
+    a = (a & 0x33333333) + ((a >> 2) & 0x33333333);
+    return (((a + (a >> 4)) & 0xf0f0f0f) * 0x1010101) >> 24;
+#endif
+}
+
+// Find the sequence comparison of a and b, this is the distance
+// between a and b ignoring overflow
+static inline int lfs_scmp(uint32_t a, uint32_t b)
+{
+    return (int)(unsigned)(a - b);
+}
+
+// Convert from 32-bit little-endian to native order
+static inline uint32_t lfs_fromle32(uint32_t a)
+{
+#if !defined(LFS_NO_INTRINSICS) && ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_LITTLE_ENDIAN) ||                                \
+                                    (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_LITTLE_ENDIAN) ||                          \
+                                    (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_LITTLE_ENDIAN__))
+    return a;
+#elif !defined(LFS_NO_INTRINSICS) &&                                                                                             \
+    ((defined(BYTE_ORDER) && BYTE_ORDER == ORDER_BIG_ENDIAN) || (defined(__BYTE_ORDER) && __BYTE_ORDER == __ORDER_BIG_ENDIAN) || \
+     (defined(__BYTE_ORDER__) && __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__))
+    return __builtin_bswap32(a);
+#else
+    return (((uint8_t *)&a)[0] << 0) | (((uint8_t *)&a)[1] << 8) | (((uint8_t *)&a)[2] << 16) | (((uint8_t *)&a)[3] << 24);
+#endif
+}
+
+// Convert to 32-bit little-endian from native order
+static inline uint32_t lfs_tole32(uint32_t a)
+{
+    return lfs_fromle32(a);
+}
+
+// Calculate CRC-32 with polynomial = 0x04c11db7
+void lfs_crc(uint32_t *crc, const void *buffer, size_t size);
+
+// Allocate memory, only used if buffers are not provided to littlefs
+static inline void *lfs_malloc(size_t size)
+{
+#ifndef LFS_NO_MALLOC
+    extern void *pvPortMalloc(size_t xWantedSize);
+    return pvPortMalloc(size);
+#else
+    (void)size;
+    return NULL;
+#endif
+}
+
+// Deallocate memory, only used if buffers are not provided to littlefs
+static inline void lfs_free(void *p)
+{
+#ifndef LFS_NO_MALLOC
+    extern void vPortFree(void *pv);
+    vPortFree(p);
+#else
+    (void)p;
+#endif
+}
+
+#ifdef __cplusplus
+} /* extern "C" */
+#endif
+
+#endif
+#endif
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-micro_Pinouts_2025-12-04.pdf
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-micro_Pinouts_2025-12-04.pdf
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/readme.md
@@ -2,9 +2,11 @@

 # Notes

+News 2025-12-04 - The GPS pin definitions have been changed!!! This has no material effect on current builds, but future builders may wish to review how they are using the wires.
+
 ## General

-The pinout is contained in the variant.h file, and a [generic schematic](./Schematic_Pro-Micro_Pinouts.pdf) is located in this directory.
+The pinout is contained in the variant.h file, and a [generic schematic](./Schematic_Pro-Micro_Pinouts_2025-12-04.pdf) is located in this directory.

 This variant is suitable for both TCXO and XTAL types of modules. The old XTAL variant has been removed to reduce confusion.

--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.h
@@ -30,8 +30,8 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 | Gnd   |             |     | reset    |              |       |
 | Gnd   |             |     | ext_vcc  | *see 0.13    |       |
 | P0.17 | RXEN        |     | P0.31    | BATTERY_PIN  |       |
-| P0.20 | GPS_RX      |     | P0.29    | BUSY         | DIO0  |
-| P0.22 | GPS_TX      |     | P0.02    | MISO         | MISO  |
+| P0.20 | GPS_TX      |     | P0.29    | BUSY         | DIO0  |
+| P0.22 | GPS_RX      |     | P0.02    | MISO         | MISO  |
 | P0.24 | GPS_EN      |     | P1.15    | MOSI         | MOSI  |
 | P1.00 | BUTTON_PIN  |     | P1.13    | CS           | CS    |
 | P0.11 | SCL         |     | P1.11    | SCK          | SCK   |
@@ -90,16 +90,16 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define BUTTON_PIN (32 + 0) // P1.00

 // GPS
-#define PIN_GPS_TX (0 + 22) // P0.22
-#define PIN_GPS_RX (0 + 20) // P0.20
+#define PIN_GPS_TX (0 + 20) // P0.20 - This is data from the MCU
+#define PIN_GPS_RX (0 + 22) // P0.22 - This is data from the GNSS

 #define PIN_GPS_EN (0 + 24) // P0.24
 #define GPS_UBLOX
 // define GPS_DEBUG

 // UART interfaces
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_TX PIN_GPS_TX
+#define PIN_SERIAL1_RX PIN_GPS_RX

 #define PIN_SERIAL2_RX (0 + 6) // P0.06
 #define PIN_SERIAL2_TX (0 + 8) // P0.08
--- a/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h
+++ b/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.h
@@ -116,13 +116,13 @@ No longer populated on PCB
 #define PIN_GPS_PPS (32 + 4)
 // Seems to be missing on this new board
 // #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS

 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
--- a/variants/nrf52840/heltec_mesh_node_t114/variant.h
+++ b/variants/nrf52840/heltec_mesh_node_t114/variant.h
@@ -21,8 +21,8 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)

-#define USE_LFXO // Board uses 32khz crystal for LF
-
+//#define USE_LFXO // Board uses 32khz crystal for LF
+#define USE_LFRC    // Board uses RC for LF
 /*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/
@@ -167,13 +167,13 @@ No longer populated on PCB
 #define PIN_GPS_PPS (32 + 4)
 // Seems to be missing on this new board
 // #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS

 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
@@ -211,7 +211,8 @@ No longer populated on PCB
 #define ADC_MULTIPLIER (4.916F)

 // rf52840 AIN2 = Pin 4
-#define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_2
+// commented out due to power leakage of 2.9mA in shutdown state see reported issue #8801
+// #define BATTERY_LPCOMP_INPUT NRF_LPCOMP_INPUT_2 //UNSAFE

 // We have AIN2 with a VBAT divider so AIN2 = VBAT * (100/490)
 // We have the device going deep sleep under 3.1V, which is AIN2 = 0.63V
--- a/variants/nrf52840/heltec_mesh_pocket/variant.h
+++ b/variants/nrf52840/heltec_mesh_pocket/variant.h
@@ -122,6 +122,12 @@ No longer populated on PCB
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (4.6425F)

+#if defined(HELTEC_MESH_POCKET_BATTERY_5000)
+#define OCV_ARRAY 4300, 4240, 4120, 4000, 3888, 3800, 3740, 3698, 3655, 3580, 3400
+#elif defined(HELTEC_MESH_POCKET_BATTERY_10000)
+#define OCV_ARRAY 4100, 4060, 3960, 3840, 3729, 3625, 3550, 3500, 3420, 3345, 3100
+#endif
+
 #undef HAS_GPS
 #define HAS_GPS 0
 #define HAS_RTC 0
--- a/variants/nrf52840/heltec_mesh_solar/variant.h
+++ b/variants/nrf52840/heltec_mesh_solar/variant.h
@@ -116,13 +116,13 @@ No longer populated on PCB
 #define PIN_GPS_PPS (32 + 4)
 // Seems to be missing on this new board
 // #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 5) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 7) // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN (32 + 7) // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 5) // This is for bits going TOWARDS the GPS

 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 /*
 * SPI Interfaces
--- a/variants/nrf52840/meshlink/platformio.ini
+++ b/variants/nrf52840/meshlink/platformio.ini
@@ -9,6 +9,30 @@ board_level = extra
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/meshlink
  -D MESHLINK
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
+
+[env:meshlink_eink]
+extends = nrf52840_base
+board = meshlink
+board_level = extra
+;board_check = true
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/meshlink
+  -D MESHLINK
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -D USE_EINK
  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
  -D EINK_WIDTH=250
  -D EINK_HEIGHT=122
--- a/variants/nrf52840/meshlink/variant.h
+++ b/variants/nrf52840/meshlink/variant.h
@@ -121,8 +121,8 @@ static const uint8_t SCK = PIN_SPI_SCK;

 #define PIN_GPS_PPS (26) // Pulse per second input from the GPS

-#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
+#define GPS_TX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the GPS

 // #define GPS_THREAD_INTERVAL 50

--- a/variants/nrf52840/meshlink_eink/platformio.ini
+++ b/variants/nrf52840/meshlink_eink/platformio.ini
@@ -1,31 +0,0 @@
-; MeshLink board developed by LoraItalia. NRF52840, eByte E22900M22S (Will also come with other frequencies), 25w MPPT solar charger (5v,12v,18v selectable), support for gps, buzzer, oled or e-ink display, 10 gpios, hardware watchdog
-; https://www.loraitalia.it
-; firmware for boards with a 250x122 e-ink display
-[env:meshlink_eink]
-extends = nrf52840_base
-board = meshlink
-board_level = extra
-;board_check = true
-build_flags = ${nrf52840_base.build_flags}
-  -I variants/nrf52840/meshlink_eink
-  -D MESHLINK
-  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
-  -D EINK_WIDTH=250
-  -D EINK_HEIGHT=122
-  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
-  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
-  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
-  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
-  -D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
-
-
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink_eink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-debug_tool = jlink
-; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
-;upload_protocol = jlink
--- a/variants/nrf52840/meshlink_eink/variant.cpp
+++ b/variants/nrf52840/meshlink_eink/variant.cpp
@@ -1,23 +0,0 @@
-#include "variant.h"
-#include "nrf.h"
-#include "wiring_constants.h"
-#include "wiring_digital.h"
-
-const uint32_t g_ADigitalPinMap[] = {
-    // P0
-    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-
-    // P1
-    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
-
-void initVariant()
-{
-    pinMode(PIN_LED1, OUTPUT);
-    digitalWrite(PIN_LED1, HIGH); // turn off the white led while booting
-                                  // otherwise it will stay lit for several seconds (could be annoying)
-
-#ifdef PIN_WD_EN
-    pinMode(PIN_WD_EN, OUTPUT);
-    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
-#endif
-}
--- a/variants/nrf52840/meshlink_eink/variant.h
+++ b/variants/nrf52840/meshlink_eink/variant.h
@@ -1,153 +0,0 @@
-#ifndef _VARIANT_MESHLINK_
-#define _VARIANT_MESHLINK_
-#ifndef MESHLINK
-#define MESHLINK
-#endif
-/** Master clock frequency */
-#define VARIANT_MCK (64000000ul)
-
-// #define USE_LFXO // Board uses 32khz crystal for LF
-#define USE_LFRC // Board uses RC for LF
-
-/*----------------------------------------------------------------------------
- *        Headers
- *----------------------------------------------------------------------------*/
-
-#include "WVariant.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif // __cplusplus
-
-// Number of pins defined in PinDescription array
-#define PINS_COUNT (48)
-#define NUM_DIGITAL_PINS (48)
-#define NUM_ANALOG_INPUTS (2)
-#define NUM_ANALOG_OUTPUTS (0)
-
-#define BUTTON_PIN (-1) // If defined, this will be used for user button presses,
-#define BUTTON_NEED_PULLUP
-
-// LEDs
-#define PIN_LED1 (24) // Built in white led for status
-#define LED_BLUE PIN_LED1
-#define LED_BUILTIN PIN_LED1
-
-#define LED_STATE_ON 0 // State when LED is litted
-#define LED_INVERTED 1
-
-// Testing USB detection
-// #define NRF_APM
-
-/*
- * Analog pins
- */
-#define PIN_A1 (3) // P0.03/AIN1
-#define ADC_RESOLUTION 14
-
-// Other pins
-// #define PIN_AREF (2)
-// static const uint8_t AREF = PIN_AREF;
-
-/*
- * Serial interfaces
- */
-#define PIN_SERIAL1_RX (32 + 8)
-#define PIN_SERIAL1_TX (7)
-
-/*
- * SPI Interfaces
- */
-#define SPI_INTERFACES_COUNT 2
-
-#define PIN_SPI_MISO (8)
-#define PIN_SPI_MOSI (32 + 9)
-#define PIN_SPI_SCK (11)
-
-#define PIN_SPI1_MISO (23)
-#define PIN_SPI1_MOSI (21)
-#define PIN_SPI1_SCK (19)
-
-static const uint8_t SS = 12;
-static const uint8_t MOSI = PIN_SPI_MOSI;
-static const uint8_t MISO = PIN_SPI_MISO;
-static const uint8_t SCK = PIN_SPI_SCK;
-
-/*
- * eink display pins
- */
-#define USE_EINK
-
-#define PIN_EINK_CS (15)
-#define PIN_EINK_BUSY (16)
-#define PIN_EINK_DC (14)
-#define PIN_EINK_RES (17)
-#define PIN_EINK_SCLK (19)
-#define PIN_EINK_MOSI (21) // also called SDI
-
-/*
- * Wire Interfaces
- */
-#define WIRE_INTERFACES_COUNT 1
-
-#define PIN_WIRE_SDA (1)
-#define PIN_WIRE_SCL (27)
-
-// QSPI Pins
-#define PIN_QSPI_SCK 19
-#define PIN_QSPI_CS 22
-#define PIN_QSPI_IO0 21
-#define PIN_QSPI_IO1 23
-#define PIN_QSPI_IO2 32
-#define PIN_QSPI_IO3 20
-
-// On-board QSPI Flash
-#define EXTERNAL_FLASH_DEVICES W25Q16JVUXIQ
-#define EXTERNAL_FLASH_USE_QSPI
-
-#define USE_SX1262
-#define SX126X_CS (12)
-#define SX126X_DIO1 (32 + 1)
-#define SX126X_BUSY (32 + 3)
-#define SX126X_RESET (6)
-// #define SX126X_RXEN (13)
-// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-
-// pin 25 is used to enable or disable the watchdog. This pin has to be disabled when cpu is put to sleep
-// otherwise the timer will expire and wd will reboot the cpu
-#define PIN_WD_EN (25)
-
-#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
-
-#define GPS_TX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the GPS
-
-// #define GPS_THREAD_INTERVAL 50
-
-// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
-#define PIN_GPS_EN (0)
-#define GPS_EN_ACTIVE LOW
-
-#define PIN_BUZZER (31) // P0.31/AIN7
-
-// Battery
-// The battery sense is hooked to pin A0 (2)
-#define BATTERY_PIN (2)
-// and has 12 bit resolution
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#define BATTERY_SENSE_RESOLUTION 4096.0
-#undef AREF_VOLTAGE
-#define AREF_VOLTAGE 3.0
-#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER 1.42 // fine tuning of voltage
-
-#ifdef __cplusplus
-}
-#endif
-
-/*----------------------------------------------------------------------------
- *        Arduino objects - C++ only
- *----------------------------------------------------------------------------*/
-#endif
--- a/variants/nrf52840/meshtiny/variant.h
+++ b/variants/nrf52840/meshtiny/variant.h
@@ -64,6 +64,7 @@ extern "C" {
 #define INPUTDRIVER_ENCODER_UP 26
 #define INPUTDRIVER_ENCODER_DOWN 4
 #define INPUTDRIVER_ENCODER_BTN 28
+#define UPDOWN_LONG_PRESS_REPEAT_INTERVAL 150

 #define CANNED_MESSAGE_MODULE_ENABLE 1

--- a/variants/nrf52840/muzi_base/variant.h
+++ b/variants/nrf52840/muzi_base/variant.h
@@ -103,12 +103,12 @@ extern "C" {
 #define LR11X0_DIO_AS_RF_SWITCH

 // GPS
-#define GPS_RX_PIN (0 + 19)  // P0.19
-#define GPS_TX_PIN (0 + 20)  // P0.20
+#define GPS_RX_PIN (0 + 20)  // P0.20
+#define GPS_TX_PIN (0 + 19)  // P0.19
 #define GPS_EN_GPIO (32 + 1) // P1.01

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 #define PIN_BUZZER (0 + 22) // P0.22

--- a/variants/nrf52840/nano-g2-ultra/variant.h
+++ b/variants/nrf52840/nano-g2-ultra/variant.h
@@ -132,13 +132,13 @@ External serial flash W25Q16JV_IQ
 #define GPS_L76K

 #define PIN_GPS_STANDBY (0 + 13) // An output to wake GPS, low means allow sleep, high means force wake STANDBY
-#define PIN_GPS_TX (0 + 9)       // This is for bits going TOWARDS the CPU
-#define PIN_GPS_RX (0 + 10)      // This is for bits going TOWARDS the GPS
+#define PIN_GPS_TX (0 + 10)      // This is for bits going TOWARDS the CPU
+#define PIN_GPS_RX (0 + 9)       // This is for bits going TOWARDS the GPS

 // #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_TX PIN_GPS_TX
+#define PIN_SERIAL1_RX PIN_GPS_RX

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
--- a/variants/nrf52840/nrf52.ini
+++ b/variants/nrf52840/nrf52.ini
@@ -0,0 +1,51 @@
+[nrf52_base]
+; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files
+platform =
+  # renovate: datasource=custom.pio depName=platformio/nordicnrf52 packageName=platformio/platform/nordicnrf52
+  platformio/nordicnrf52@^10.8.0
+extends = arduino_base
+platform_packages =
+  ; our custom Git version until they merge our PR
+  # TODO renovate
+  platformio/framework-arduinoadafruitnrf52 @ https://github.com/meshtastic/Adafruit_nRF52_Arduino#c770c8a16a351b55b86e347a3d9d7b74ad0bbf39
+  ; Don't renovate toolchain-gccarmnoneeabi
+  platformio/toolchain-gccarmnoneeabi@~1.90301.0
+
+extra_scripts =
+  ${env.extra_scripts}
+  extra_scripts/nrf52_extra.py
+
+build_type = release
+build_flags =
+  -include variants/nrf52840/cpp_overrides/lfs_util.h
+  ${arduino_base.build_flags}
+  -DSERIAL_BUFFER_SIZE=1024
+  -Wno-unused-variable
+  -Isrc/platform/nrf52
+  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -Os
+build_unflags =
+  -Ofast
+  -Og
+  -ggdb3
+  -ggdb2
+  -g3
+  -g2
+  -g
+  -g1
+  -g0
+
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
+
+lib_deps=
+  ${arduino_base.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
+
+lib_ignore =
+  BluetoothOTA
+  lvgl
--- a/variants/nrf52840/nrf52832.ini
+++ b/variants/nrf52840/nrf52832.ini
@@ -0,0 +1,7 @@
+[nrf52832_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}
--- a/variants/nrf52840/nrf52840.ini
+++ b/variants/nrf52840/nrf52840.ini
@@ -0,0 +1,80 @@
+[nrf52840_base]
+extends = nrf52_base
+
+build_flags = ${nrf52_base.build_flags} 
+
+lib_deps =
+  ${nrf52_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  # renovate: datasource=git-refs depName=Kongduino-Adafruit_nRFCrypto packageName=https://github.com/Kongduino/Adafruit_nRFCrypto gitBranch=master
+  https://github.com/Kongduino/Adafruit_nRFCrypto/archive/8cde7189b5ead9dcd49f72601b43b969c0bbc06e.zip
+
+; Common NRF52 debugging settings follow.  See the Meshtastic developer docs for how to connect SWD debugging probes to your board.
+
+; We want the initial breakpoint at setup() instead of main().  Also we want to enable semihosting at that point so instead of
+debug_init_break = tbreak setup
+; we just turn off the platformio tbreak and do it in .gdbinit (where we have more flexibility for scripting)
+; also we use a permanent breakpoint so it gets reused each time we restart the debugging session?
+; debug_init_break = tbreak main
+
+; Note: add "monitor arm semihosting_redirect tcp 4444 all" if you want the stdout from the device to go to that port number instead
+; (for use by meshtastic command line)
+;  monitor arm semihosting disable
+;  monitor debug_level 3
+;
+; IMPORTANT: fileio must be disabled before using port 5555 - openocd ver 0.12 has a bug where if enabled it never properly parses the special :tt name
+; for stdio access.
+;   monitor arm semihosting_redirect tcp 5555 stdio
+
+; Also note: it is _impossible_ to do non blocking reads on the semihost console port (an oversight when ARM specified the semihost API).
+; So we'll neve be able to general purpose bi-directional communication with the device over semihosting.
+debug_extra_cmds =
+  echo Running .gdbinit script
+  ;monitor arm semihosting enable
+  ;monitor arm semihosting_fileio enable
+  ;monitor arm semihosting_redirect disable
+  commands 1
+  ; echo Breakpoint at setup() has semihosting console, connect to it with "telnet localhost 5555"
+  ; set wantSemihost = 1
+  set useSoftDevice = 0
+  end
+
+  ; Only reprogram the board if the code has changed
+debug_load_mode = modified
+;debug_load_mode = manual
+; We default to the stlink adapter because it is very cheap and works well, though others (such as jlink) are also supported.
+;debug_tool = jlink
+debug_tool = stlink
+debug_speed = 4000
+;debug_tool = custom
+; debug_server =
+;  openocd
+;  -f
+;  /usr/local/share/openocd/scripts/interface/stlink.cfg
+;  -f
+;  /usr/local/share/openocd/scripts/target/nrf52.cfg
+; $PLATFORMIO_CORE_DIR/packages/tool-openocd/openocd/scripts/interface/cmsis-dap.cfg
+
+; Allows programming and debug via the RAK NanoDAP as the default debugger tool for the RAK4631 (it is only $10!)
+; programming time is about the same as the bootloader version.
+; For information on this see the meshtastic developers documentation for "Development on the NRF52"
+; We manually pass in the elf file so that pyocd can reverse engineer FreeRTOS data (running threads, etc...)
+;debug_server =
+;  pyocd
+;  gdbserver
+;  -j
+;  ${platformio.workspace_dir}/..
+;  -t
+;  nrf52840
+;  --semihosting
+;  --elf
+;  ${platformio.build_dir}/${this.__env__}/firmware.elf
+
+; If you want to debug the semihosting support you can turn on extra logging in pyocd with
+;   -L
+;   pyocd.debug.semihost.trace=debug
+
+; The following is not needed because it automatically tries do this
+;debug_server_ready_pattern = -.*GDB server started on port \d+.*
+;debug_port = localhost:3333
--- a/variants/nrf52840/rak4631/platformio.ini
+++ b/variants/nrf52840/rak4631/platformio.ini
@@ -8,29 +8,18 @@ build_type = release
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/rak4631
  -D RAK_4631
-  -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
-  -DEINK_WIDTH=250
-  -DEINK_HEIGHT=122 
+  -DMESHTASTIC_USE_EINK_UI=0
  -DRADIOLIB_EXCLUDE_SX128X=1
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -Os
-  -Wl,-Map=$BUILD_DIR/output.map
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 build_src_filter = ${nrf52_base.build_src_filter} \
  +<../variants/nrf52840/rak4631> \
  +<mesh/eth/> \
  +<mesh/api/> \
-  +<mqtt/>
+  +<mqtt/> \
+  -<graphics/EInkDisplay2.cpp> \
+  -<graphics/EInkDynamicDisplay.cpp> \
+  -<graphics/fonts/EinkDisplayFonts.cpp>
 lib_deps = 
  ${nrf52840_base.lib_deps}
  ${nrf52_networking_base.lib_deps}
--- a/variants/nrf52840/rak_wismeshtag/variant.h
+++ b/variants/nrf52840/rak_wismeshtag/variant.h
@@ -230,6 +230,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER 1.73
+#define OCV_ARRAY 4240, 4112, 4029, 3970, 3906, 3846, 3824, 3802, 3776, 3650, 3072

 #define RAK_4631 1

--- a/variants/nrf52840/rak_wismeshtap/variant.h
+++ b/variants/nrf52840/rak_wismeshtap/variant.h
@@ -300,6 +300,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SPI_FREQUENCY 50000000
 #define TFT_SPI_PORT SPI1
 #define ST7789_CS WB_SPI_CS // Adds compatibility with the rest of the checking for a ST7789 TFT.
+#define USE_TFTDISPLAY 1

 #define SCREEN_ROTATE
 #define SCREEN_TRANSITION_FRAMERATE 5
--- a/variants/nrf52840/seeed_solar_node/variant.h
+++ b/variants/nrf52840/seeed_solar_node/variant.h
@@ -110,18 +110,19 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 #define ADC_MULTIPLIER 3.3
 #define BATTERY_PIN PIN_VBAT // PIN_A7
 #define AREF_VOLTAGE 3.3
+#define OCV_ARRAY 4200, 3986, 3922, 3812, 3734, 3645, 3527, 3420, 3281, 3087, 2786
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 //  GPS L76KB
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 #define GPS_L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6 // 44
-#define PIN_GPS_TX D7 // 43
+#define PIN_GPS_TX D6 // 44
+#define PIN_GPS_RX D7 // 43
 #define HAS_GPS 1
 #define GPS_BAUDRATE 9600
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_TX PIN_GPS_TX
+#define PIN_SERIAL1_RX PIN_GPS_RX
 #define PIN_GPS_STANDBY D0
 #define GPS_EN D18 // P1.05
 #endif
--- a/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h
+++ b/variants/nrf52840/seeed_wio_tracker_L1_eink/variant.h
@@ -122,6 +122,8 @@ static const uint8_t SCL = PIN_WIRE_SCL;
 #define ADC_MULTIPLIER 2.0
 #define BATTERY_PIN PIN_VBAT // PIN_A7
 #define AREF_VOLTAGE 3.6
+#define OCV_ARRAY 4200, 3876, 3826, 3763, 3713, 3660, 3573, 3485, 3422, 3359, 3300
+
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
 //  GPS L76KB
 // ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━
--- a/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h
+++ b/variants/nrf52840/seeed_xiao_nrf52840_kit/variant.h
@@ -147,12 +147,12 @@ static const uint8_t SCK = PIN_SPI_SCK;
 */
 // GPS L76K
 #ifdef GPS_L76K
-#define PIN_GPS_RX D6
-#define PIN_GPS_TX D7
+#define PIN_GPS_TX D6
+#define PIN_GPS_RX D7
 #define HAS_GPS 1
 #define GPS_THREAD_INTERVAL 50
-#define PIN_SERIAL1_RX PIN_GPS_TX
-#define PIN_SERIAL1_TX PIN_GPS_RX
+#define PIN_SERIAL1_TX PIN_GPS_TX
+#define PIN_SERIAL1_RX PIN_GPS_RX
 #define PIN_GPS_STANDBY D0
 #else
 #define PIN_SERIAL1_RX (-1)
--- a/variants/nrf52840/t-echo/variant.h
+++ b/variants/nrf52840/t-echo/variant.h
@@ -181,14 +181,14 @@ External serial flash WP25R1635FZUIL0

 #define PIN_GPS_STANDBY (32 + 2) // An output to wake GPS, low means allow sleep, high means force wake
 // Seems to be missing on this new board
-// #define PIN_GPS_PPS (32 + 4)  // Pulse per second input from the GPS
-#define GPS_TX_PIN (32 + 9) // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN (32 + 8) // This is for bits going TOWARDS the GPS
+#define PIN_GPS_PPS (32 + 4) // Pulse per second input from the GPS
+#define GPS_TX_PIN (32 + 8)  // This is for bits going TOWARDS the CPU
+#define GPS_RX_PIN (32 + 9)  // This is for bits going TOWARDS the GPS

 #define GPS_THREAD_INTERVAL 50

-#define PIN_SERIAL1_RX GPS_TX_PIN
-#define PIN_SERIAL1_TX GPS_RX_PIN
+#define PIN_SERIAL1_RX GPS_RX_PIN
+#define PIN_SERIAL1_TX GPS_TX_PIN

 // PCF8563 RTC Module
 #define PCF8563_RTC 0x51
@@ -203,8 +203,6 @@ External serial flash WP25R1635FZUIL0
 #define PIN_SPI_MOSI (0 + 22)
 #define PIN_SPI_SCK (0 + 19)

-#define PIN_PWR_EN (0 + 6)
-
 // To debug via the segger JLINK console rather than the CDC-ACM serial device
 // #define USE_SEGGER

--- a/variants/nrf52840/tracker-t1000-e/variant.h
+++ b/variants/nrf52840/tracker-t1000-e/variant.h
@@ -22,7 +22,9 @@
 /** Master clock frequency */
 #define VARIANT_MCK (64000000ul)

-#define USE_LFXO // Board uses 32khz crystal for LF
+//#define USE_LFXO // Board uses 32khz crystal for LF
+
+#define USE_LFRC 

 /*----------------------------------------------------------------------------
 *        Headers
@@ -142,6 +144,8 @@ extern "C" {
 #define AREF_VOLTAGE 3.0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0

+#define OCV_ARRAY 4190, 4042, 3957, 3885, 3820, 3776, 3746, 3725, 3696, 3644, 3100
+
 // Buzzer
 #define BUZZER_EN_PIN (32 + 5) // P1.05, always high
 #define PIN_BUZZER (0 + 25)    // P0.25, pwm output
--- a/variants/nrf52840/wio-sdk-wm1110/platformio.ini
+++ b/variants/nrf52840/wio-sdk-wm1110/platformio.ini
@@ -4,11 +4,22 @@ extends = nrf52840_base
 board = wio-sdk-wm1110

 extra_scripts =
-  ${env.extra_scripts}
+  ${nrf52840_base.extra_scripts}
  extra_scripts/disable_adafruit_usb.py

 # Remove adafruit USB serial from the build (it is incompatible with using the ch340 serial chip on this board)
-build_unflags = ${nrf52840_base:build_unflags} -DUSBCON -DUSE_TINYUSB
+build_unflags =
+  -Ofast
+  -Og
+  -ggdb3
+  -ggdb2
+  -g3
+  -g2
+  -g
+  -g1
+  -g0
+  -DUSBCON
+  -DUSE_TINYUSB
 build_flags = ${nrf52840_base.build_flags}
  -Ivariants/nrf52840/wio-sdk-wm1110
  -Isrc/platform/nrf52/softdevice
--- a/variants/rp2040/rp2040.ini
+++ b/variants/rp2040/rp2040.ini
@@ -0,0 +1,34 @@
+; Common settings for rp2040 Processor based targets
+[rp2040_base]
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
+extends = arduino_base
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
+  -Isrc/platform/rp2xx0
+  -Isrc/platform/rp2xx0/hardware_rosc/include
+  -Isrc/platform/rp2xx0/pico_sleep/include
+  -D__PLAT_RP2040__
+#  -D _POSIX_THREADS
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp>
+
+lib_ignore =
+  BluetoothOTA
+  lvgl
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
--- a/variants/rp2350/rp2350.ini
+++ b/variants/rp2350/rp2350.ini
@@ -0,0 +1,31 @@
+; Common settings for rp2350 Processor based targets
+[rp2350_base]
+platform =
+  # TODO renovate
+  https://github.com/maxgerhardt/platform-raspberrypi#76ecf3c7e9dd4503af0331154c4ca1cddc4b03e5
+  ; For arduino-pico >= 4.4.3
+extends = arduino_base
+platform_packages =
+  # TODO renovate
+  framework-arduinopico@https://github.com/earlephilhower/arduino-pico#4.4.3
+
+board_build.core = earlephilhower
+board_build.filesystem_size = 0.5m
+build_flags = 
+  ${arduino_base.build_flags} -Wno-unused-variable -Wcast-align
+  -Isrc/platform/rp2xx0
+  -D__PLAT_RP2350__
+build_src_filter = 
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<modules/esp32> -<platform/nrf52/> -<platform/stm32wl> -<mesh/eth/> -<mesh/wifi/> -<mesh/http/> -<mesh/raspihttp> -<platform/rp2xx0/pico_sleep> -<platform/rp2xx0/hardware_rosc>
+
+lib_ignore =
+  BluetoothOTA
+  lvgl
+
+lib_deps =
+  ${arduino_base.lib_deps}
+  ${environmental_base.lib_deps}
+  ${environmental_extra.lib_deps}
+  ${radiolib_base.lib_deps}
+  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
+  rweather/Crypto@0.4.0
--- a/variants/stm32/stm32.ini
+++ b/variants/stm32/stm32.ini
@@ -0,0 +1,59 @@
+[stm32_base]
+extends = arduino_base
+platform =
+  # renovate: datasource=custom.pio depName=platformio/ststm32 packageName=platformio/platform/ststm32
+  platformio/ststm32@19.4.0
+platform_packages =
+  # TODO renovate
+  platformio/framework-arduinoststm32@https://github.com/stm32duino/Arduino_Core_STM32/archive/2.10.1.zip
+extra_scripts =
+  ${env.extra_scripts}
+  extra_scripts/stm32_extra.py
+
+build_type = release
+
+build_flags =
+  ${arduino_base.build_flags}
+  -flto
+  -Isrc/platform/stm32wl -g
+  -DMESHTASTIC_EXCLUDE_AUDIO=1
+  -DMESHTASTIC_EXCLUDE_ATAK=1 ; ATAK is quite big, disable it for big flash savings.
+  -DMESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -DMESHTASTIC_EXCLUDE_POWERMON=1
+  -DMESHTASTIC_EXCLUDE_SCREEN=1
+  -DMESHTASTIC_EXCLUDE_MQTT=1
+  -DMESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_TZ=1 ; Exclude TZ to save some flash space.
+  -DSERIAL_RX_BUFFER_SIZE=256 ; For GPS - the default of 64 is too small.
+  -DHAS_SCREEN=0 ; Always disable screen for STM32, it is not supported.
+  -DPIO_FRAMEWORK_ARDUINO_NANOLIB_FLOAT_PRINTF ; This is REQUIRED for at least traceroute debug prints - without it the length ends up uninitialized.
+  -DDEBUG_MUTE ; You can #undef DEBUG_MUTE in certain source files if you need the logs.
+  -fmerge-all-constants
+  -ffunction-sections
+  -fdata-sections
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -DHAL_DAC_MODULE_ONLY
+  -DHAL_RNG_MODULE_ENABLED
+  -Wl,--wrap=__assert_func
+  -Wl,--wrap=strerror
+  -Wl,--wrap=_tzset_unlocked_r
+
+build_src_filter =
+  ${arduino_base.build_src_filter} -<platform/esp32/> -<nimble/> -<mesh/api/> -<mesh/wifi/> -<mesh/http/> -<modules/esp32> -<mesh/eth/> -<input> -<buzz> -<modules/RemoteHardwareModule.cpp> -<platform/nrf52> -<platform/portduino> -<platform/rp2xx0> -<mesh/raspihttp>
+
+board_upload.offset_address = 0x08000000
+upload_protocol = stlink
+debug_tool = stlink
+
+lib_deps =
+  ${env.lib_deps}
+  ${radiolib_base.lib_deps}
+
+  # renovate: datasource=git-refs depName=caveman99-stm32-Crypto packageName=https://github.com/caveman99/Crypto gitBranch=main
+  https://github.com/caveman99/Crypto/archive/1aa30eb536bd52a576fde6dfa393bf7349cf102d.zip
+
+lib_ignore =
+  OneButton