rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-21 10:12:50 +00:00
Code Issues Packages Projects Releases Wiki Activity

fix #272 add support for tlora-v2-1-1.6

Browse Source
This commit is contained in:
Marlon Spangenberg
2020-07-14 16:16:49 +02:00
parent 8fe714d8b1
commit 44749470a4
2 changed files with 38 additions and 11 deletions
Download Patch File Download Diff File Expand all files Collapse all files

35
src/configuration.h
View File

@@ -211,9 +211,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RF95_IRQ_GPIO 26
#define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#elif defined(TTGO_LORA_V1)
#elif defined(TLORA_V1)
// This string must exactly match the case used in release file names or the android updater won't work
#define HW_VENDOR "ttgo-lora32-v1"
#define HW_VENDOR "tlora-v1"
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 36
@@ -232,9 +232,9 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
#define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#elif defined(TTGO_LORA_V2)
#elif defined(TLORA_V2)
// This string must exactly match the case used in release file names or the android updater won't work
#define HW_VENDOR "ttgo-lora32-v2"
#define HW_VENDOR "tlora-v2"
#undef GPS_RX_PIN
#undef GPS_TX_PIN
@@ -248,14 +248,35 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN \
0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one
// between this pin and ground
#define BUTTON_PIN 0 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one between this pin and ground
#define RESET_GPIO 14 // If defined, this pin will be used to reset the LORA radio
#define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
#define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#elif defined(TLORA_V2_1_16)
// This string must exactly match the case used in release file names or the android updater won't work
#define HW_VENDOR "tlora-v2-1-1.6"
#undef GPS_RX_PIN
#undef GPS_TX_PIN
#define GPS_RX_PIN 36
#define GPS_TX_PIN 39
#define I2C_SDA 21 // I2C pins for this board
#define I2C_SCL 22
#define RESET_OLED 16 // If defined, this pin will be used to reset the display controller
#define VEXT_ENABLE 21 // active low, powers the oled display and the lora antenna boost
#define LED_PIN 25 // If defined we will blink this LED
#define BUTTON_PIN 12 // If defined, this will be used for user button presses, if your board doesn't have a physical switch, you can wire one between this pin and ground
#define RESET_GPIO 23 // If defined, this pin will be used to reset the LORA radio
#define RF95_IRQ_GPIO 26 // IRQ line for the LORA radio
#define DIO1_GPIO 35 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#define DIO2_GPIO 34 // DIO1 & DIO2 are not currently used, but they must be assigned to a pin number
#endif
#ifdef ARDUINO_NRF52840_PCA10056