Move input init to an init function in iInputBroker

src/input/InputBroker.cpp

@@ -1,8 +1,59 @@
 #include "InputBroker.h"
 #include "PowerFSM.h" // needed for event trigger
 #include "configuration.h"
+#include "graphics/Screen.h"
 #include "modules/ExternalNotificationModule.h"
 
+#if ARCH_PORTDUINO
+#include "input/LinuxInputImpl.h"
+#include "input/SeesawRotary.h"
+#endif
+
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER
+#include "input/ExpressLRSFiveWay.h"
+#include "input/InputBroker.h"
+#include "input/RotaryEncoderImpl.h"
+#include "input/RotaryEncoderInterruptImpl1.h"
+#include "input/SerialKeyboardImpl.h"
+#include "input/UpDownInterruptImpl1.h"
+#include "input/i2cButton.h"
+#if HAS_TRACKBALL
+#include "input/TrackballInterruptImpl1.h"
+#endif
+
+#include "modules/StatusLEDModule.h"
+
+#if !MESHTASTIC_EXCLUDE_I2C
+#include "input/cardKbI2cImpl.h"
+#endif
+#include "input/kbMatrixImpl.h"
+#endif
+
+#if HAS_BUTTON || defined(ARCH_PORTDUINO)
+#include "input/ButtonThread.h"
+
+#if defined(BUTTON_PIN_TOUCH)
+ButtonThread *TouchButtonThread = nullptr;
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+static bool touchBacklightWasOn = false;
+static bool touchBacklightActive = false;
+#endif
+#endif
+
+#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
+ButtonThread *UserButtonThread = nullptr;
+#endif
+
+#if defined(ALT_BUTTON_PIN)
+ButtonThread *BackButtonThread = nullptr;
+#endif
+
+#if defined(CANCEL_BUTTON_PIN)
+ButtonThread *CancelButtonThread = nullptr;
+#endif
+
+#endif
+
 InputBroker *inputBroker = nullptr;
 
 InputBroker::InputBroker()
@@ -74,3 +125,263 @@ void InputBroker::pollSoonWorker(void *p)
     vTaskDelete(NULL);
 }
 #endif
+
+void InputBroker::Init()
+{
+
+#ifdef BUTTON_PIN
+#ifdef ARCH_ESP32
+
+#if ESP_ARDUINO_VERSION_MAJOR >= 3
+#ifdef BUTTON_NEED_PULLUP
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP);
+#else
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
+#endif
+#else
+    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
+#ifdef BUTTON_NEED_PULLUP
+    gpio_pullup_en((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
+    delay(10);
+#endif
+#ifdef BUTTON_NEED_PULLUP2
+    gpio_pullup_en((gpio_num_t)BUTTON_NEED_PULLUP2);
+    delay(10);
+#endif
+#endif
+#endif
+#endif
+
+// buttons are now inputBroker, so have to come after setupModules
+#if HAS_BUTTON
+    int pullup_sense = 0;
+#ifdef INPUT_PULLUP_SENSE
+    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
+#ifdef BUTTON_SENSE_TYPE
+    pullup_sense = BUTTON_SENSE_TYPE;
+#else
+    pullup_sense = INPUT_PULLUP_SENSE;
+#endif
+#endif
+#if defined(ARCH_PORTDUINO)
+
+    if (portduino_config.userButtonPin.enabled) {
+
+        LOG_DEBUG("Use GPIO%02d for button", portduino_config.userButtonPin.pin);
+        UserButtonThread = new ButtonThread("UserButton");
+        if (screen) {
+            ButtonConfig config;
+            config.pinNumber = (uint8_t)portduino_config.userButtonPin.pin;
+            config.activeLow = true;
+            config.activePullup = true;
+            config.pullupSense = INPUT_PULLUP;
+            config.intRoutine = []() {
+                UserButtonThread->userButton.tick();
+                UserButtonThread->setIntervalFromNow(0);
+                runASAP = true;
+                BaseType_t higherWake = 0;
+                concurrency::mainDelay.interruptFromISR(&higherWake);
+            };
+            config.singlePress = INPUT_BROKER_USER_PRESS;
+            config.longPress = INPUT_BROKER_SELECT;
+            UserButtonThread->initButton(config);
+        }
+    }
+#endif
+
+#ifdef BUTTON_PIN_TOUCH
+    TouchButtonThread = new ButtonThread("BackButton");
+    ButtonConfig touchConfig;
+    touchConfig.pinNumber = BUTTON_PIN_TOUCH;
+    touchConfig.activeLow = true;
+    touchConfig.activePullup = true;
+    touchConfig.pullupSense = pullup_sense;
+    touchConfig.intRoutine = []() {
+        TouchButtonThread->userButton.tick();
+        TouchButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    touchConfig.singlePress = INPUT_BROKER_NONE;
+    touchConfig.longPress = INPUT_BROKER_BACK;
+#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
+    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
+    touchConfig.longPress = INPUT_BROKER_NONE;
+    touchConfig.suppressLeadUpSound = true;
+    touchConfig.onPress = []() {
+        touchBacklightWasOn = uiconfig.screen_brightness == 1;
+        if (!touchBacklightWasOn) {
+            digitalWrite(PIN_EINK_EN, HIGH);
+        }
+        touchBacklightActive = true;
+    };
+    touchConfig.onRelease = []() {
+        if (touchBacklightActive && !touchBacklightWasOn) {
+            digitalWrite(PIN_EINK_EN, LOW);
+        }
+        touchBacklightActive = false;
+    };
+#endif
+    TouchButtonThread->initButton(touchConfig);
+#endif
+
+#if defined(CANCEL_BUTTON_PIN)
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    CancelButtonThread = new ButtonThread("CancelButton");
+    ButtonConfig cancelConfig;
+    cancelConfig.pinNumber = CANCEL_BUTTON_PIN;
+    cancelConfig.activeLow = CANCEL_BUTTON_ACTIVE_LOW;
+    cancelConfig.activePullup = CANCEL_BUTTON_ACTIVE_PULLUP;
+    cancelConfig.pullupSense = pullup_sense;
+    cancelConfig.intRoutine = []() {
+        CancelButtonThread->userButton.tick();
+        CancelButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    cancelConfig.singlePress = INPUT_BROKER_CANCEL;
+    cancelConfig.longPress = INPUT_BROKER_SHUTDOWN;
+    cancelConfig.longPressTime = 4000;
+    CancelButtonThread->initButton(cancelConfig);
+#endif
+
+#if defined(ALT_BUTTON_PIN)
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    BackButtonThread = new ButtonThread("BackButton");
+    ButtonConfig backConfig;
+    backConfig.pinNumber = ALT_BUTTON_PIN;
+    backConfig.activeLow = ALT_BUTTON_ACTIVE_LOW;
+    backConfig.activePullup = ALT_BUTTON_ACTIVE_PULLUP;
+    backConfig.pullupSense = pullup_sense;
+    backConfig.intRoutine = []() {
+        BackButtonThread->userButton.tick();
+        BackButtonThread->setIntervalFromNow(0);
+        runASAP = true;
+        BaseType_t higherWake = 0;
+        concurrency::mainDelay.interruptFromISR(&higherWake);
+    };
+    backConfig.singlePress = INPUT_BROKER_ALT_PRESS;
+    backConfig.longPress = INPUT_BROKER_ALT_LONG;
+    backConfig.longPressTime = 500;
+    BackButtonThread->initButton(backConfig);
+#endif
+
+#if defined(BUTTON_PIN)
+#if defined(USERPREFS_BUTTON_PIN)
+    int _pinNum = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN;
+#else
+    int _pinNum = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
+#endif
+#ifndef BUTTON_ACTIVE_LOW
+#define BUTTON_ACTIVE_LOW true
+#endif
+#ifndef BUTTON_ACTIVE_PULLUP
+#define BUTTON_ACTIVE_PULLUP true
+#endif
+
+    // Buttons. Moved here cause we need NodeDB to be initialized
+    // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
+    UserButtonThread = new ButtonThread("UserButton");
+    if (screen) {
+        ButtonConfig userConfig;
+        userConfig.pinNumber = (uint8_t)_pinNum;
+        userConfig.activeLow = BUTTON_ACTIVE_LOW;
+        userConfig.activePullup = BUTTON_ACTIVE_PULLUP;
+        userConfig.pullupSense = pullup_sense;
+        userConfig.intRoutine = []() {
+            UserButtonThread->userButton.tick();
+            UserButtonThread->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            concurrency::mainDelay.interruptFromISR(&higherWake);
+        };
+        userConfig.singlePress = INPUT_BROKER_USER_PRESS;
+        userConfig.longPress = INPUT_BROKER_SELECT;
+        userConfig.longPressTime = 500;
+        userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
+        UserButtonThread->initButton(userConfig);
+    } else {
+        ButtonConfig userConfigNoScreen;
+        userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
+        userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
+        userConfigNoScreen.activePullup = BUTTON_ACTIVE_PULLUP;
+        userConfigNoScreen.pullupSense = pullup_sense;
+        userConfigNoScreen.intRoutine = []() {
+            UserButtonThread->userButton.tick();
+            UserButtonThread->setIntervalFromNow(0);
+            runASAP = true;
+            BaseType_t higherWake = 0;
+            concurrency::mainDelay.interruptFromISR(&higherWake);
+        };
+        userConfigNoScreen.singlePress = INPUT_BROKER_USER_PRESS;
+        userConfigNoScreen.longPress = INPUT_BROKER_NONE;
+        userConfigNoScreen.longPressTime = 500;
+        userConfigNoScreen.longLongPress = INPUT_BROKER_SHUTDOWN;
+        userConfigNoScreen.doublePress = INPUT_BROKER_SEND_PING;
+        userConfigNoScreen.triplePress = INPUT_BROKER_GPS_TOGGLE;
+        UserButtonThread->initButton(userConfigNoScreen);
+    }
+#endif
+
+#if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+#if defined(T_LORA_PAGER)
+        // use a special FSM based rotary encoder version for T-LoRa Pager
+        rotaryEncoderImpl = new RotaryEncoderImpl();
+        if (!rotaryEncoderImpl->init()) {
+            delete rotaryEncoderImpl;
+            rotaryEncoderImpl = nullptr;
+        }
+#elif defined(INPUTDRIVER_ENCODER_TYPE) && (INPUTDRIVER_ENCODER_TYPE == 2)
+        upDownInterruptImpl1 = new UpDownInterruptImpl1();
+        if (!upDownInterruptImpl1->init()) {
+            delete upDownInterruptImpl1;
+            upDownInterruptImpl1 = nullptr;
+        }
+#else
+        rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
+        if (!rotaryEncoderInterruptImpl1->init()) {
+            delete rotaryEncoderInterruptImpl1;
+            rotaryEncoderInterruptImpl1 = nullptr;
+        }
+#endif
+        cardKbI2cImpl = new CardKbI2cImpl();
+        cardKbI2cImpl->init();
+#if defined(M5STACK_UNITC6L)
+        i2cButton = new i2cButtonThread("i2cButtonThread");
+#endif
+#ifdef INPUTBROKER_MATRIX_TYPE
+        kbMatrixImpl = new KbMatrixImpl();
+        kbMatrixImpl->init();
+#endif // INPUTBROKER_MATRIX_TYPE
+#ifdef INPUTBROKER_SERIAL_TYPE
+        aSerialKeyboardImpl = new SerialKeyboardImpl();
+        aSerialKeyboardImpl->init();
+#endif // INPUTBROKER_MATRIX_TYPE
+    }
+#endif // HAS_BUTTON
+#if ARCH_PORTDUINO
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
+        seesawRotary = new SeesawRotary("SeesawRotary");
+        if (!seesawRotary->init()) {
+            delete seesawRotary;
+            seesawRotary = nullptr;
+        }
+        aLinuxInputImpl = new LinuxInputImpl();
+        aLinuxInputImpl->init();
+    }
+#endif
+#if !MESHTASTIC_EXCLUDE_INPUTBROKER && HAS_TRACKBALL
+    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
+        trackballInterruptImpl1 = new TrackballInterruptImpl1();
+        trackballInterruptImpl1->init(TB_DOWN, TB_UP, TB_LEFT, TB_RIGHT, TB_PRESS);
+    }
+#endif
+#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
+    expressLRSFiveWayInput = new ExpressLRSFiveWay();
+#endif
+
+#endif
+}

src/input/InputBroker.h

@@ -1,6 +1,7 @@
 #pragma once
 
 #include "Observer.h"
+#include "concurrency/OSThread.h"
 #include "freertosinc.h"
 
 #ifdef InputBrokerDebug
@@ -76,6 +77,7 @@ class InputBroker : public Observable<const InputEvent *>
     void queueInputEvent(const InputEvent *event);
     void processInputEventQueue();
 #endif
+    void Init();
 
   protected:
     int handleInputEvent(const InputEvent *event);
@@ -89,4 +91,5 @@ class InputBroker : public Observable<const InputEvent *>
 #endif
 };
 
-extern InputBroker *inputBroker;
+extern InputBroker *inputBroker;
+extern bool runASAP;

src/main.cpp

@@ -120,31 +120,6 @@ void printPartitionTable()
 #endif // DEBUG_PARTITION_TABLE
 #endif // ARCH_ESP32
 
-#if HAS_BUTTON || defined(ARCH_PORTDUINO)
-#include "input/ButtonThread.h"
-
-#if defined(BUTTON_PIN_TOUCH)
-ButtonThread *TouchButtonThread = nullptr;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-static bool touchBacklightWasOn = false;
-static bool touchBacklightActive = false;
-#endif
-#endif
-
-#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO)
-ButtonThread *UserButtonThread = nullptr;
-#endif
-
-#if defined(ALT_BUTTON_PIN)
-ButtonThread *BackButtonThread = nullptr;
-#endif
-
-#if defined(CANCEL_BUTTON_PIN)
-ButtonThread *CancelButtonThread = nullptr;
-#endif
-
-#endif
-
 #include "AmbientLightingThread.h"
 #include "PowerFSMThread.h"
 
@@ -509,30 +484,6 @@ void setup()
     LOG_INFO("Wait for peripherals to stabilize");
     delay(PERIPHERAL_WARMUP_MS);
 #endif
-
-#ifdef BUTTON_PIN
-#ifdef ARCH_ESP32
-
-#if ESP_ARDUINO_VERSION_MAJOR >= 3
-#ifdef BUTTON_NEED_PULLUP
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT_PULLUP);
-#else
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
-#endif
-#else
-    pinMode(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, INPUT); // default to BUTTON_PIN
-#ifdef BUTTON_NEED_PULLUP
-    gpio_pullup_en((gpio_num_t)(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN));
-    delay(10);
-#endif
-#ifdef BUTTON_NEED_PULLUP2
-    gpio_pullup_en((gpio_num_t)BUTTON_NEED_PULLUP2);
-    delay(10);
-#endif
-#endif
-#endif
-#endif
-
     initSPI();
 
     OSThread::setup();
@@ -1000,180 +951,7 @@ void setup()
     }
 #endif
 
-// buttons are now inputBroker, so have to come after setupModules
+    inputBroker->Init();
-#if HAS_BUTTON
-    int pullup_sense = 0;
-#ifdef INPUT_PULLUP_SENSE
-    // Some platforms (nrf52) have a SENSE variant which allows wake from sleep - override what OneButton did
-#ifdef BUTTON_SENSE_TYPE
-    pullup_sense = BUTTON_SENSE_TYPE;
-#else
-    pullup_sense = INPUT_PULLUP_SENSE;
-#endif
-#endif
-#if defined(ARCH_PORTDUINO)
-
-    if (portduino_config.userButtonPin.enabled) {
-
-        LOG_DEBUG("Use GPIO%02d for button", portduino_config.userButtonPin.pin);
-        UserButtonThread = new ButtonThread("UserButton");
-        if (screen) {
-            ButtonConfig config;
-            config.pinNumber = (uint8_t)portduino_config.userButtonPin.pin;
-            config.activeLow = true;
-            config.activePullup = true;
-            config.pullupSense = INPUT_PULLUP;
-            config.intRoutine = []() {
-                UserButtonThread->userButton.tick();
-                UserButtonThread->setIntervalFromNow(0);
-                runASAP = true;
-                BaseType_t higherWake = 0;
-                mainDelay.interruptFromISR(&higherWake);
-            };
-            config.singlePress = INPUT_BROKER_USER_PRESS;
-            config.longPress = INPUT_BROKER_SELECT;
-            UserButtonThread->initButton(config);
-        }
-    }
-#endif
-
-#ifdef BUTTON_PIN_TOUCH
-    TouchButtonThread = new ButtonThread("BackButton");
-    ButtonConfig touchConfig;
-    touchConfig.pinNumber = BUTTON_PIN_TOUCH;
-    touchConfig.activeLow = true;
-    touchConfig.activePullup = true;
-    touchConfig.pullupSense = pullup_sense;
-    touchConfig.intRoutine = []() {
-        TouchButtonThread->userButton.tick();
-        TouchButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    touchConfig.singlePress = INPUT_BROKER_NONE;
-    touchConfig.longPress = INPUT_BROKER_BACK;
-#if defined(TTGO_T_ECHO_PLUS) && defined(PIN_EINK_EN)
-    // On T-Echo Plus the touch pad should only drive the backlight, not UI navigation/sounds
-    touchConfig.longPress = INPUT_BROKER_NONE;
-    touchConfig.suppressLeadUpSound = true;
-    touchConfig.onPress = []() {
-        touchBacklightWasOn = uiconfig.screen_brightness == 1;
-        if (!touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, HIGH);
-        }
-        touchBacklightActive = true;
-    };
-    touchConfig.onRelease = []() {
-        if (touchBacklightActive && !touchBacklightWasOn) {
-            digitalWrite(PIN_EINK_EN, LOW);
-        }
-        touchBacklightActive = false;
-    };
-#endif
-    TouchButtonThread->initButton(touchConfig);
-#endif
-
-#if defined(CANCEL_BUTTON_PIN)
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    CancelButtonThread = new ButtonThread("CancelButton");
-    ButtonConfig cancelConfig;
-    cancelConfig.pinNumber = CANCEL_BUTTON_PIN;
-    cancelConfig.activeLow = CANCEL_BUTTON_ACTIVE_LOW;
-    cancelConfig.activePullup = CANCEL_BUTTON_ACTIVE_PULLUP;
-    cancelConfig.pullupSense = pullup_sense;
-    cancelConfig.intRoutine = []() {
-        CancelButtonThread->userButton.tick();
-        CancelButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    cancelConfig.singlePress = INPUT_BROKER_CANCEL;
-    cancelConfig.longPress = INPUT_BROKER_SHUTDOWN;
-    cancelConfig.longPressTime = 4000;
-    CancelButtonThread->initButton(cancelConfig);
-#endif
-
-#if defined(ALT_BUTTON_PIN)
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    BackButtonThread = new ButtonThread("BackButton");
-    ButtonConfig backConfig;
-    backConfig.pinNumber = ALT_BUTTON_PIN;
-    backConfig.activeLow = ALT_BUTTON_ACTIVE_LOW;
-    backConfig.activePullup = ALT_BUTTON_ACTIVE_PULLUP;
-    backConfig.pullupSense = pullup_sense;
-    backConfig.intRoutine = []() {
-        BackButtonThread->userButton.tick();
-        BackButtonThread->setIntervalFromNow(0);
-        runASAP = true;
-        BaseType_t higherWake = 0;
-        mainDelay.interruptFromISR(&higherWake);
-    };
-    backConfig.singlePress = INPUT_BROKER_ALT_PRESS;
-    backConfig.longPress = INPUT_BROKER_ALT_LONG;
-    backConfig.longPressTime = 500;
-    BackButtonThread->initButton(backConfig);
-#endif
-
-#if defined(BUTTON_PIN)
-#if defined(USERPREFS_BUTTON_PIN)
-    int _pinNum = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN;
-#else
-    int _pinNum = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN;
-#endif
-#ifndef BUTTON_ACTIVE_LOW
-#define BUTTON_ACTIVE_LOW true
-#endif
-#ifndef BUTTON_ACTIVE_PULLUP
-#define BUTTON_ACTIVE_PULLUP true
-#endif
-
-    // Buttons. Moved here cause we need NodeDB to be initialized
-    // If your variant.h has a BUTTON_PIN defined, go ahead and define BUTTON_ACTIVE_LOW and BUTTON_ACTIVE_PULLUP
-    UserButtonThread = new ButtonThread("UserButton");
-    if (screen) {
-        ButtonConfig userConfig;
-        userConfig.pinNumber = (uint8_t)_pinNum;
-        userConfig.activeLow = BUTTON_ACTIVE_LOW;
-        userConfig.activePullup = BUTTON_ACTIVE_PULLUP;
-        userConfig.pullupSense = pullup_sense;
-        userConfig.intRoutine = []() {
-            UserButtonThread->userButton.tick();
-            UserButtonThread->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        };
-        userConfig.singlePress = INPUT_BROKER_USER_PRESS;
-        userConfig.longPress = INPUT_BROKER_SELECT;
-        userConfig.longPressTime = 500;
-        userConfig.longLongPress = INPUT_BROKER_SHUTDOWN;
-        UserButtonThread->initButton(userConfig);
-    } else {
-        ButtonConfig userConfigNoScreen;
-        userConfigNoScreen.pinNumber = (uint8_t)_pinNum;
-        userConfigNoScreen.activeLow = BUTTON_ACTIVE_LOW;
-        userConfigNoScreen.activePullup = BUTTON_ACTIVE_PULLUP;
-        userConfigNoScreen.pullupSense = pullup_sense;
-        userConfigNoScreen.intRoutine = []() {
-            UserButtonThread->userButton.tick();
-            UserButtonThread->setIntervalFromNow(0);
-            runASAP = true;
-            BaseType_t higherWake = 0;
-            mainDelay.interruptFromISR(&higherWake);
-        };
-        userConfigNoScreen.singlePress = INPUT_BROKER_USER_PRESS;
-        userConfigNoScreen.longPress = INPUT_BROKER_NONE;
-        userConfigNoScreen.longPressTime = 500;
-        userConfigNoScreen.longLongPress = INPUT_BROKER_SHUTDOWN;
-        userConfigNoScreen.doublePress = INPUT_BROKER_SEND_PING;
-        userConfigNoScreen.triplePress = INPUT_BROKER_GPS_TOGGLE;
-        UserButtonThread->initButton(userConfigNoScreen);
-    }
-#endif
-
-#endif
 
 #ifdef MESHTASTIC_INCLUDE_NICHE_GRAPHICS
     // After modules are setup, so we can observe modules

src/modules/Modules.cpp

@@ -1,24 +1,7 @@
 #include "configuration.h"
 #if !MESHTASTIC_EXCLUDE_INPUTBROKER
 #include "buzz/BuzzerFeedbackThread.h"
-#include "input/ExpressLRSFiveWay.h"
-#include "input/InputBroker.h"
-#include "input/RotaryEncoderImpl.h"
-#include "input/RotaryEncoderInterruptImpl1.h"
-#include "input/SerialKeyboardImpl.h"
-#include "input/UpDownInterruptImpl1.h"
-#include "input/i2cButton.h"
 #include "modules/SystemCommandsModule.h"
-#if HAS_TRACKBALL
-#include "input/TrackballInterruptImpl1.h"
-#endif
-
-#include "modules/StatusLEDModule.h"
-
-#if !MESHTASTIC_EXCLUDE_I2C
-#include "input/cardKbI2cImpl.h"
-#endif
-#include "input/kbMatrixImpl.h"
 #endif
 #if !MESHTASTIC_EXCLUDE_PKI
 #include "KeyVerificationModule.h"
@@ -59,8 +42,6 @@
 #include "modules/WaypointModule.h"
 #endif
 #if ARCH_PORTDUINO
-#include "input/LinuxInputImpl.h"
-#include "input/SeesawRotary.h"
 #include "modules/Telemetry/HostMetrics.h"
 #if !MESHTASTIC_EXCLUDE_STOREFORWARD
 #include "modules/StoreForwardModule.h"
@@ -179,63 +160,6 @@ void setupModules()
 #endif
     // Example: Put your module here
     // new ReplyModule();
-#if (HAS_BUTTON || ARCH_PORTDUINO) && !MESHTASTIC_EXCLUDE_INPUTBROKER
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-#if defined(T_LORA_PAGER)
-        // use a special FSM based rotary encoder version for T-LoRa Pager
-        rotaryEncoderImpl = new RotaryEncoderImpl();
-        if (!rotaryEncoderImpl->init()) {
-            delete rotaryEncoderImpl;
-            rotaryEncoderImpl = nullptr;
-        }
-#elif defined(INPUTDRIVER_ENCODER_TYPE) && (INPUTDRIVER_ENCODER_TYPE == 2)
-        upDownInterruptImpl1 = new UpDownInterruptImpl1();
-        if (!upDownInterruptImpl1->init()) {
-            delete upDownInterruptImpl1;
-            upDownInterruptImpl1 = nullptr;
-        }
-#else
-        rotaryEncoderInterruptImpl1 = new RotaryEncoderInterruptImpl1();
-        if (!rotaryEncoderInterruptImpl1->init()) {
-            delete rotaryEncoderInterruptImpl1;
-            rotaryEncoderInterruptImpl1 = nullptr;
-        }
-#endif
-        cardKbI2cImpl = new CardKbI2cImpl();
-        cardKbI2cImpl->init();
-#if defined(M5STACK_UNITC6L)
-        i2cButton = new i2cButtonThread("i2cButtonThread");
-#endif
-#ifdef INPUTBROKER_MATRIX_TYPE
-        kbMatrixImpl = new KbMatrixImpl();
-        kbMatrixImpl->init();
-#endif // INPUTBROKER_MATRIX_TYPE
-#ifdef INPUTBROKER_SERIAL_TYPE
-        aSerialKeyboardImpl = new SerialKeyboardImpl();
-        aSerialKeyboardImpl->init();
-#endif // INPUTBROKER_MATRIX_TYPE
-    }
-#endif // HAS_BUTTON
-#if ARCH_PORTDUINO
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR && portduino_config.i2cdev != "") {
-        seesawRotary = new SeesawRotary("SeesawRotary");
-        if (!seesawRotary->init()) {
-            delete seesawRotary;
-            seesawRotary = nullptr;
-        }
-        aLinuxInputImpl = new LinuxInputImpl();
-        aLinuxInputImpl->init();
-    }
-#endif
-#if !MESHTASTIC_EXCLUDE_INPUTBROKER && HAS_TRACKBALL
-    if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
-        trackballInterruptImpl1 = new TrackballInterruptImpl1();
-        trackballInterruptImpl1->init(TB_DOWN, TB_UP, TB_LEFT, TB_RIGHT, TB_PRESS);
-    }
-#endif
-#ifdef INPUTBROKER_EXPRESSLRSFIVEWAY_TYPE
-    expressLRSFiveWayInput = new ExpressLRSFiveWay();
-#endif
 #if HAS_SCREEN && !MESHTASTIC_EXCLUDE_CANNEDMESSAGES
     if (config.display.displaymode != meshtastic_Config_DisplayConfig_DisplayMode_COLOR) {
         cannedMessageModule = new CannedMessageModule();