diff --git a/.devcontainer/99-platformio-udev.rules b/.devcontainer/99-platformio-udev.rules new file mode 100644 index 000000000..83c7b8731 --- /dev/null +++ b/.devcontainer/99-platformio-udev.rules @@ -0,0 +1,183 @@ +# Copyright (c) 2014-present PlatformIO +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. + +##################################################################################### +# +# INSTALLATION +# +# Please visit > https://docs.platformio.org/en/latest/core/installation/udev-rules.html +# +##################################################################################### + +# +# Boards +# + +# CP210X USB UART +ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="ea[67][013]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +ATTRS{idVendor}=="10c4", ATTRS{idProduct}=="80a9", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# FT231XS USB UART +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Prolific Technology, Inc. PL2303 Serial Port +ATTRS{idVendor}=="067b", ATTRS{idProduct}=="2303", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# QinHeng Electronics HL-340 USB-Serial adapter +ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7523", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +# QinHeng Electronics CH343 USB-Serial adapter +ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d3", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +# QinHeng Electronics CH9102 USB-Serial adapter +ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55d4", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Arduino boards +ATTRS{idVendor}=="2341", ATTRS{idProduct}=="[08][023]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +ATTRS{idVendor}=="2a03", ATTRS{idProduct}=="[08][02]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Arduino SAM-BA +ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="6124", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{MTP_NO_PROBE}="1" + +# Digistump boards +ATTRS{idVendor}=="16d0", ATTRS{idProduct}=="0753", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Maple with DFU +ATTRS{idVendor}=="1eaf", ATTRS{idProduct}=="000[34]", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# USBtiny +ATTRS{idProduct}=="0c9f", ATTRS{idVendor}=="1781", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# USBasp V2.0 +ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="05dc", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Teensy boards +ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789A]?", ENV{MTP_NO_PROBE}="1" +SUBSYSTEMS=="usb", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789ABCD]?", MODE:="0666" +KERNEL=="ttyACM*", ATTRS{idVendor}=="16c0", ATTRS{idProduct}=="04[789B]?", MODE:="0666" + +# TI Stellaris Launchpad +ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# TI MSP430 Launchpad +ATTRS{idVendor}=="0451", ATTRS{idProduct}=="f432", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# GD32V DFU Bootloader +ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="0189", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# FireBeetle-ESP32 +ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="7522", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Wio Terminal +ATTRS{idVendor}=="2886", ATTRS{idProduct}=="[08]02d", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Raspberry Pi Pico +ATTRS{idVendor}=="2e8a", ATTRS{idProduct}=="[01]*", MODE:="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# AIR32F103 +ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# STM32 virtual COM port +ATTRS{idVendor}=="0483", ATTRS{idProduct}=="5740", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# +# Debuggers +# + +# Black Magic Probe +SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic GDB Server", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" +SUBSYSTEM=="tty", ATTRS{interface}=="Black Magic UART Port", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# opendous and estick +ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="204f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Original FT232/FT245/FT2232/FT232H/FT4232 +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="60[01][104]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# DISTORTEC JTAG-lock-pick Tiny 2 +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8220", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# TUMPA, TUMPA Lite +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="8a9[89]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# XDS100v2 +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="a6d0", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Xverve Signalyzer Tool (DT-USB-ST), Signalyzer LITE (DT-USB-SLITE) +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bca[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# TI/Luminary Stellaris Evaluation Board FTDI (several) +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bcd[9a]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# egnite Turtelizer 2 +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="bdc8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Section5 ICEbear +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="c14[01]", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Amontec JTAGkey and JTAGkey-tiny +ATTRS{idVendor}=="0403", ATTRS{idProduct}=="cff8", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# TI ICDI +ATTRS{idVendor}=="0451", ATTRS{idProduct}=="c32a", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# STLink probes +ATTRS{idVendor}=="0483", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Hilscher NXHX Boards +ATTRS{idVendor}=="0640", ATTRS{idProduct}=="0028", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Hitex probes +ATTRS{idVendor}=="0640", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Altera USB Blaster +ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Amontec JTAGkey-HiSpeed +ATTRS{idVendor}=="0fbb", ATTRS{idProduct}=="1000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# SEGGER J-Link +ATTRS{idVendor}=="1366", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Raisonance RLink +ATTRS{idVendor}=="138e", ATTRS{idProduct}=="9000", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Debug Board for Neo1973 +ATTRS{idVendor}=="1457", ATTRS{idProduct}=="5118", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Olimex probes +ATTRS{idVendor}=="15ba", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# USBprog with OpenOCD firmware +ATTRS{idVendor}=="1781", ATTRS{idProduct}=="0c63", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# TI/Luminary Stellaris In-Circuit Debug Interface (ICDI) Board +ATTRS{idVendor}=="1cbe", ATTRS{idProduct}=="00fd", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Marvell Sheevaplug +ATTRS{idVendor}=="9e88", ATTRS{idProduct}=="9e8f", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Keil Software, Inc. ULink +ATTRS{idVendor}=="c251", ATTRS{idProduct}=="2710", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# CMSIS-DAP compatible adapters +ATTRS{product}=="*CMSIS-DAP*", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Atmel AVR Dragon +ATTRS{idVendor}=="03eb", ATTRS{idProduct}=="2107", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Espressif USB JTAG/serial debug unit +ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" + +# Zephyr framework USB CDC-ACM +ATTRS{idVendor}=="2fe3", ATTRS{idProduct}=="0100", MODE="0666", ENV{ID_MM_DEVICE_IGNORE}="1", ENV{ID_MM_PORT_IGNORE}="1" \ No newline at end of file diff --git a/.devcontainer/Dockerfile b/.devcontainer/Dockerfile index c21564491..62f0b7ead 100644 --- a/.devcontainer/Dockerfile +++ b/.devcontainer/Dockerfile @@ -1,6 +1,9 @@ FROM mcr.microsoft.com/devcontainers/cpp:1-debian-12 -# [Optional] Uncomment this section to install additional packages. +USER root + +# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue +# trunk-ignore(hadolint/DL3008): Use latest version of packages RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \ && apt-get -y install --no-install-recommends \ ca-certificates \ @@ -20,6 +23,16 @@ RUN apt-get update && export DEBIAN_FRONTEND=noninteractive \ python3-wheel \ wget \ zip \ + usbutils \ + hwdata \ + gpg \ + gnupg2 \ && apt-get clean && rm -rf /var/lib/apt/lists/* -RUN pipx install platformio==6.1.15 \ No newline at end of file +RUN pipx install platformio==6.1.15 + +COPY 99-platformio-udev.rules /etc/udev/rules.d/99-platformio-udev.rules + +USER vscode + +HEALTHCHECK NONE \ No newline at end of file diff --git a/.devcontainer/devcontainer.json b/.devcontainer/devcontainer.json index d83d052b0..bf1c50982 100644 --- a/.devcontainer/devcontainer.json +++ b/.devcontainer/devcontainer.json @@ -13,13 +13,24 @@ }, "customizations": { "vscode": { - "extensions": ["ms-vscode.cpptools", "platformio.platformio-ide"] + "extensions": [ + "ms-vscode.cpptools", + "platformio.platformio-ide", + "Trunk.io" + ], + "unwantedRecommendations": ["ms-azuretools.vscode-docker"], + "settings": { + "extensions.ignoreRecommendations": true + } } }, // Use 'forwardPorts' to make a list of ports inside the container available locally. "forwardPorts": [4403], + // Use "--device=" to make a local device available inside the container. + // "runArgs": ["--device=/dev/ttyACM0"], + // Run commands to prepare the container for use "postCreateCommand": ".devcontainer/setup.sh" } diff --git a/.env.example b/.env.example new file mode 100644 index 000000000..72d95970a --- /dev/null +++ b/.env.example @@ -0,0 +1,4 @@ +# Absolute path to the local meshtastic config.yaml file +CONFIG_PATH=/path/to/meshtastic/config.yaml +# USB device to passthrough (`lsusb -t`: look for `ch341`) +USB_DEVICE=/dev/bus/usb/001/037 diff --git a/.github/actions/build-variant/action.yml b/.github/actions/build-variant/action.yml index 80d2a56bb..b3303d393 100644 --- a/.github/actions/build-variant/action.yml +++ b/.github/actions/build-variant/action.yml @@ -51,6 +51,7 @@ runs: file: build.tar target: build.tar token: ${{ inputs.github_token }} + version: tags/v2.5.3 - name: Unpack web ui if: inputs.include-web-ui == 'true' diff --git a/.github/workflows/build_docker.yml b/.github/workflows/build_docker.yml new file mode 100644 index 000000000..13817a8cf --- /dev/null +++ b/.github/workflows/build_docker.yml @@ -0,0 +1,51 @@ +name: Build Docker + +on: workflow_call + +permissions: + contents: write + packages: write + +jobs: + build-native: + runs-on: ubuntu-latest + steps: + - name: Checkout code + uses: actions/checkout@v4 + with: + submodules: recursive + ref: ${{github.event.pull_request.head.ref}} + repository: ${{github.event.pull_request.head.repo.full_name}} + + - name: Get release version string + run: echo "version=$(./bin/buildinfo.py long)" >> $GITHUB_OUTPUT + id: version + + - name: Docker login + if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} + uses: docker/login-action@v3 + with: + username: meshtastic + password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }} + + - name: Docker setup + if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} + uses: docker/setup-buildx-action@v3 + + - name: Docker build and push tagged versions + if: ${{ github.event_name == 'workflow_dispatch' }} + uses: docker/build-push-action@v6 + with: + context: . + file: ./Dockerfile + push: true + tags: meshtastic/meshtasticd:${{ steps.version.outputs.version }} + + - name: Docker build and push + if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} + uses: docker/build-push-action@v6 + with: + context: . + file: ./Dockerfile + push: true + tags: meshtastic/meshtasticd:latest diff --git a/.github/workflows/build_esp32.yml b/.github/workflows/build_esp32.yml index 7d069e3db..4fc31f22c 100644 --- a/.github/workflows/build_esp32.yml +++ b/.github/workflows/build_esp32.yml @@ -7,6 +7,8 @@ on: required: true type: string +permissions: read-all + jobs: build-esp32: runs-on: ubuntu-latest @@ -24,6 +26,7 @@ jobs: ./arch/esp32/esp32s2.ini ./arch/esp32/esp32s3.ini ./arch/esp32/esp32c3.ini + ./arch/esp32/esp32c6.ini build-script-path: bin/build-esp32.sh ota-firmware-source: firmware.bin ota-firmware-target: release/bleota.bin diff --git a/.github/workflows/build_esp32_c3.yml b/.github/workflows/build_esp32_c3.yml index 5234dbe81..546762952 100644 --- a/.github/workflows/build_esp32_c3.yml +++ b/.github/workflows/build_esp32_c3.yml @@ -26,10 +26,12 @@ jobs: ./arch/esp32/esp32s2.ini ./arch/esp32/esp32s3.ini ./arch/esp32/esp32c3.ini + ./arch/esp32/esp32c6.ini build-script-path: bin/build-esp32.sh ota-firmware-source: firmware-c3.bin ota-firmware-target: release/bleota-c3.bin artifact-paths: | release/*.bin release/*.elf + include-web-ui: true arch: esp32c3 diff --git a/.github/workflows/build_esp32_c6.yml b/.github/workflows/build_esp32_c6.yml index 66f2764a6..56d4d806d 100644 --- a/.github/workflows/build_esp32_c6.yml +++ b/.github/workflows/build_esp32_c6.yml @@ -33,4 +33,5 @@ jobs: artifact-paths: | release/*.bin release/*.elf + include-web-ui: true arch: esp32c6 diff --git a/.github/workflows/build_esp32_s3.yml b/.github/workflows/build_esp32_s3.yml index 554b37cef..a9c067ee1 100644 --- a/.github/workflows/build_esp32_s3.yml +++ b/.github/workflows/build_esp32_s3.yml @@ -7,6 +7,8 @@ on: required: true type: string +permissions: read-all + jobs: build-esp32-s3: runs-on: ubuntu-latest @@ -24,6 +26,7 @@ jobs: ./arch/esp32/esp32s2.ini ./arch/esp32/esp32s3.ini ./arch/esp32/esp32c3.ini + ./arch/esp32/esp32c6.ini build-script-path: bin/build-esp32.sh ota-firmware-source: firmware-s3.bin ota-firmware-target: release/bleota-s3.bin diff --git a/.github/workflows/build_native.yml b/.github/workflows/build_native.yml index 1fb44a717..74bc074aa 100644 --- a/.github/workflows/build_native.yml +++ b/.github/workflows/build_native.yml @@ -14,7 +14,7 @@ jobs: shell: bash run: | sudo apt-get update --fix-missing - sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev + sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev - name: Checkout code uses: actions/checkout@v4 @@ -50,36 +50,3 @@ jobs: path: | release/meshtasticd_linux_x86_64 bin/config-dist.yaml - - - name: Docker login - if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} - uses: docker/login-action@v3 - continue-on-error: true # FIXME: Failing docker login auth - with: - username: meshtastic - password: ${{ secrets.DOCKER_FIRMWARE_TOKEN }} - - - name: Docker setup - if: ${{ github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} - continue-on-error: true # FIXME: Failing docker login auth - uses: docker/setup-buildx-action@v3 - - - name: Docker build and push tagged versions - if: ${{ github.event_name == 'workflow_dispatch' }} - continue-on-error: true # FIXME: Failing docker login auth - uses: docker/build-push-action@v6 - with: - context: . - file: ./Dockerfile - push: true - tags: meshtastic/device-simulator:${{ steps.version.outputs.version }} - - - name: Docker build and push - if: ${{ github.ref == 'refs/heads/master' && github.event_name != 'pull_request_target' && github.event_name != 'pull_request' }} - continue-on-error: true # FIXME: Failing docker login auth - uses: docker/build-push-action@v6 - with: - context: . - file: ./Dockerfile - push: true - tags: meshtastic/device-simulator:latest diff --git a/.github/workflows/build_raspbian.yml b/.github/workflows/build_raspbian.yml index 1fd8fad30..ac63dfea4 100644 --- a/.github/workflows/build_raspbian.yml +++ b/.github/workflows/build_raspbian.yml @@ -13,8 +13,8 @@ jobs: - name: Install libbluetooth shell: bash run: | - apt-get update -y --fix-missing - apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev + sudo apt-get update -y --fix-missing + sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev - name: Checkout code uses: actions/checkout@v4 diff --git a/.github/workflows/build_raspbian_armv7l.yml b/.github/workflows/build_raspbian_armv7l.yml index 39b297d1b..565d9a0dc 100644 --- a/.github/workflows/build_raspbian_armv7l.yml +++ b/.github/workflows/build_raspbian_armv7l.yml @@ -13,8 +13,8 @@ jobs: - name: Install libbluetooth shell: bash run: | - apt-get update -y --fix-missing - apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev + sudo apt-get update -y --fix-missing + sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev - name: Checkout code uses: actions/checkout@v4 diff --git a/.github/workflows/main_matrix.yml b/.github/workflows/main_matrix.yml index 0853df19f..0109bef1a 100644 --- a/.github/workflows/main_matrix.yml +++ b/.github/workflows/main_matrix.yml @@ -37,7 +37,7 @@ jobs: else TARGETS=$(./bin/generate_ci_matrix.py ${{matrix.arch}} quick) fi - echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} Head: ${{ github.head_ref }} Ref: ${{ github.ref }} Targets: $TARGETS" + echo "Name: ${{ github.ref_name }} Base: ${{ github.base_ref }} } Ref: ${{ github.ref }} Targets: $TARGETS" echo "${{matrix.arch}}=$(jq -cn --argjson environments "$TARGETS" '{board: $environments}')" >> $GITHUB_OUTPUT outputs: esp32: ${{ steps.jsonStep.outputs.esp32 }} @@ -137,6 +137,11 @@ jobs: package-native: uses: ./.github/workflows/package_amd64.yml + build-docker: + if: ${{ github.event_name == 'workflow_dispatch' }} + uses: ./.github/workflows/build_docker.yml + secrets: inherit + after-checks: runs-on: ubuntu-latest if: ${{ github.event_name != 'workflow_dispatch' }} @@ -203,6 +208,7 @@ jobs: ./device-*.sh ./device-*.bat ./littlefs-*.bin + ./littlefswebui-*.bin ./bleota*bin ./Meshtastic_nRF52_factory_erase*.uf2 retention-days: 30 @@ -245,7 +251,8 @@ jobs: if: ${{ github.event_name == 'workflow_dispatch' }} outputs: upload_url: ${{ steps.create_release.outputs.upload_url }} - needs: [ + needs: + [ gather-artifacts, package-raspbian, package-raspbian-armv7l, diff --git a/.github/workflows/package_amd64.yml b/.github/workflows/package_amd64.yml index 0b5093f24..c6e82e1be 100644 --- a/.github/workflows/package_amd64.yml +++ b/.github/workflows/package_amd64.yml @@ -47,18 +47,30 @@ jobs: - name: build .debpkg run: | mkdir -p .debpkg/DEBIAN - mkdir -p .debpkg/usr/share/doc/meshtasticd/web + mkdir -p .debpkg/usr/share/meshtasticd/web mkdir -p .debpkg/usr/sbin mkdir -p .debpkg/etc/meshtasticd + mkdir -p .debpkg/etc/meshtasticd/config.d + mkdir -p .debpkg/etc/meshtasticd/available.d mkdir -p .debpkg/usr/lib/systemd/system/ - tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web - gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz + tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web + shopt -s dotglob nullglob + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi + if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi + gunzip .debpkg/usr/share/meshtasticd/web/ -r cp release/meshtasticd_linux_x86_64 .debpkg/usr/sbin/meshtasticd cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml + cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r chmod +x .debpkg/usr/sbin/meshtasticd cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles chmod +x .debpkg/DEBIAN/conffiles + # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd + echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst + chmod +x .debpkg/DEBIAN/preinst + echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst + chmod +x .debpkg/DEBIAN/postinst - uses: jiro4989/build-deb-action@v3 with: @@ -67,7 +79,7 @@ jobs: maintainer: Jonathan Bennett version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.* arch: amd64 - depends: libyaml-cpp0.7, openssl, libulfius2.7 + depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0 desc: Native Linux Meshtastic binary. - uses: actions/upload-artifact@v4 diff --git a/.github/workflows/package_raspbian.yml b/.github/workflows/package_raspbian.yml index bcbda53e2..a4cd49573 100644 --- a/.github/workflows/package_raspbian.yml +++ b/.github/workflows/package_raspbian.yml @@ -47,18 +47,30 @@ jobs: - name: build .debpkg run: | mkdir -p .debpkg/DEBIAN - mkdir -p .debpkg/usr/share/doc/meshtasticd/web + mkdir -p .debpkg/usr/share/meshtasticd/web mkdir -p .debpkg/usr/sbin mkdir -p .debpkg/etc/meshtasticd + mkdir -p .debpkg/etc/meshtasticd/config.d + mkdir -p .debpkg/etc/meshtasticd/available.d mkdir -p .debpkg/usr/lib/systemd/system/ - tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web - gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz + tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web + shopt -s dotglob nullglob + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi + if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi + gunzip .debpkg/usr/share/meshtasticd/web/ -r cp release/meshtasticd_linux_aarch64 .debpkg/usr/sbin/meshtasticd cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml + cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r chmod +x .debpkg/usr/sbin/meshtasticd cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles chmod +x .debpkg/DEBIAN/conffiles + # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd + echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst + chmod +x .debpkg/DEBIAN/preinst + echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst + chmod +x .debpkg/DEBIAN/postinst - uses: jiro4989/build-deb-action@v3 with: @@ -67,7 +79,7 @@ jobs: maintainer: Jonathan Bennett version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.* arch: arm64 - depends: libyaml-cpp0.7, openssl, libulfius2.7 + depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0 desc: Native Linux Meshtastic binary. - uses: actions/upload-artifact@v4 diff --git a/.github/workflows/package_raspbian_armv7l.yml b/.github/workflows/package_raspbian_armv7l.yml index 1308fe925..c4cc5c673 100644 --- a/.github/workflows/package_raspbian_armv7l.yml +++ b/.github/workflows/package_raspbian_armv7l.yml @@ -47,18 +47,30 @@ jobs: - name: build .debpkg run: | mkdir -p .debpkg/DEBIAN - mkdir -p .debpkg/usr/share/doc/meshtasticd/web + mkdir -p .debpkg/usr/share/meshtasticd/web mkdir -p .debpkg/usr/sbin mkdir -p .debpkg/etc/meshtasticd + mkdir -p .debpkg/etc/meshtasticd/config.d + mkdir -p .debpkg/etc/meshtasticd/available.d mkdir -p .debpkg/usr/lib/systemd/system/ - tar -xf build.tar -C .debpkg/usr/share/doc/meshtasticd/web - gunzip .debpkg/usr/share/doc/meshtasticd/web/*.gz + tar -xf build.tar -C .debpkg/usr/share/meshtasticd/web + shopt -s dotglob nullglob + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then mv .debpkg/usr/share/meshtasticd/web/build/* .debpkg/usr/share/meshtasticd/web/; fi + if [ -d .debpkg/usr/share/meshtasticd/web/build ]; then rmdir .debpkg/usr/share/meshtasticd/web/build; fi + if [ -d .debpkg/usr/share/meshtasticd/web/.DS_Store ]; then rm -f .debpkg/usr/share/meshtasticd/web/.DS_Store; fi + gunzip .debpkg/usr/share/meshtasticd/web/ -r cp release/meshtasticd_linux_armv7l .debpkg/usr/sbin/meshtasticd cp bin/config-dist.yaml .debpkg/etc/meshtasticd/config.yaml + cp bin/config.d/* .debpkg/etc/meshtasticd/available.d/ -r chmod +x .debpkg/usr/sbin/meshtasticd cp bin/meshtasticd.service .debpkg/usr/lib/systemd/system/meshtasticd.service echo "/etc/meshtasticd/config.yaml" > .debpkg/DEBIAN/conffiles chmod +x .debpkg/DEBIAN/conffiles + # Transition /usr/share/doc/meshtasticd to /usr/share/meshtasticd + echo "rm -rf /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/preinst + chmod +x .debpkg/DEBIAN/preinst + echo "ln -sf /usr/share/meshtasticd /usr/share/doc/meshtasticd" > .debpkg/DEBIAN/postinst + chmod +x .debpkg/DEBIAN/postinst - uses: jiro4989/build-deb-action@v3 with: @@ -67,7 +79,7 @@ jobs: maintainer: Jonathan Bennett version: ${{ steps.version.outputs.version }} # refs/tags/v*.*.* arch: armhf - depends: libyaml-cpp0.7, openssl, libulfius2.7 + depends: libyaml-cpp0.7, openssl, libulfius2.7, libi2c0 desc: Native Linux Meshtastic binary. - uses: actions/upload-artifact@v4 diff --git a/.github/workflows/stale_bot.yml b/.github/workflows/stale_bot.yml new file mode 100644 index 000000000..0ce0579de --- /dev/null +++ b/.github/workflows/stale_bot.yml @@ -0,0 +1,22 @@ +name: process stale Issues and PR's +on: + schedule: + - cron: 0 6 * * * + workflow_dispatch: {} + +permissions: + issues: write + pull-requests: write + actions: write + +jobs: + stale_issues: + name: Close Stale Issues + runs-on: ubuntu-latest + + steps: + - name: Stale PR+Issues + uses: actions/stale@v9.0.0 + with: + exempt-issue-labels: pinned,3.0 + exempt-pr-labels: pinned,3.0 diff --git a/.github/workflows/tests.yml b/.github/workflows/tests.yml index 241598fd0..ae9f82543 100644 --- a/.github/workflows/tests.yml +++ b/.github/workflows/tests.yml @@ -8,12 +8,15 @@ on: jobs: test-simulator: runs-on: ubuntu-latest + env: + LCOV_CAPTURE_FLAGS: --quiet --capture --include "${PWD}/src/*" --exclude '*/src/mesh/generated/*' --directory .pio/build/coverage/src --base-directory "${PWD}" steps: - - name: Install libbluetooth + - name: Install libs needed for native build shell: bash run: | sudo apt-get update --fix-missing - sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev + sudo apt-get install -y libbluetooth-dev libgpiod-dev libyaml-cpp-dev openssl libssl-dev libulfius-dev liborcania-dev libusb-1.0-0-dev libi2c-dev + sudo apt-get install -y lcov - name: Checkout code uses: actions/checkout@v4 @@ -24,7 +27,7 @@ jobs: shell: bash run: | python -m pip install --upgrade pip - pip install -U platformio adafruit-nrfutil + pip install -U platformio adafruit-nrfutil dotmap pip install -U meshtastic --pre - name: Upgrade platformio @@ -36,17 +39,25 @@ jobs: run: bin/build-native.sh # We now run integration test before other build steps (to quickly see runtime failures) - - name: Build for native - run: platformio run -e native + - name: Build for native/coverage + run: | + platformio run -e coverage + lcov ${{ env.LCOV_CAPTURE_FLAGS }} --initial --output-file coverage_base.info - name: Integration test run: | - .pio/build/native/program & sleep 10 # 5 seconds was not enough + .pio/build/coverage/program & + PID=$! + timeout 20 bash -c "until ls -al /proc/$PID/fd | grep socket; do sleep 1; done" echo "Simulator started, launching python test..." python3 -c 'from meshtastic.test import testSimulator; testSimulator()' + wait + lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name integration --output-file coverage_integration.info - name: PlatformIO Tests - run: platformio test -e native --junit-output-path testreport.xml + run: | + platformio test -e coverage --junit-output-path testreport.xml + lcov ${{ env.LCOV_CAPTURE_FLAGS }} --test-name tests --output-file coverage_tests.info - name: Test Report uses: dorny/test-reporter@v1.9.1 @@ -56,6 +67,19 @@ jobs: path: testreport.xml reporter: java-junit + - name: Generate Code Coverage Report + run: | + lcov --quiet --add-tracefile coverage_base.info --add-tracefile coverage_integration.info --add-tracefile coverage_tests.info --output-file coverage_src.info + mkdir code-coverage-report + genhtml --quiet --legend --prefix "${PWD}" coverage_src.info --output-directory code-coverage-report + mv coverage_*.info code-coverage-report + + - name: Save Code Coverage Report + uses: actions/upload-artifact@v4 + with: + name: code-coverage-report + path: code-coverage-report + hardware-tests: runs-on: test-runner steps: diff --git a/.github/workflows/trunk_format_pr.yml b/.github/workflows/trunk_format_pr.yml new file mode 100644 index 000000000..c5c20b465 --- /dev/null +++ b/.github/workflows/trunk_format_pr.yml @@ -0,0 +1,43 @@ +name: Run Trunk Fmt on PR Comment + +on: + issue_comment: + types: [created] + +jobs: + trunk-fmt: + if: github.event.issue.pull_request != null && contains(github.event.comment.body, 'trunk fmt') + runs-on: ubuntu-latest + + steps: + - name: Checkout repository + uses: actions/checkout@v4 + with: + ref: ${{github.event.pull_request.head.ref}} + repository: ${{github.event.pull_request.head.repo.full_name}} + + - name: Install trunk + run: curl https://get.trunk.io -fsSL | bash + + - name: Run Trunk Fmt + run: trunk fmt + + - name: Commit and push changes + run: | + git config --global user.name "github-actions[bot]" + git config --global user.email "github-actions[bot]@users.noreply.github.com" + git add . + git commit -m "Add firmware version ${{ steps.version.outputs.version }}" + git push + + - name: Comment on PR + uses: actions/github-script@v7 + with: + github-token: ${{ secrets.GITHUB_TOKEN }} + script: | + github.issues.createComment({ + issue_number: context.issue.number, + owner: context.repo.owner, + repo: context.repo.repo, + body: '`trunk fmt` has been run on this PR.' + }) diff --git a/.github/workflows/update_protobufs.yml b/.github/workflows/update_protobufs.yml index f1c92b860..2732ab760 100644 --- a/.github/workflows/update_protobufs.yml +++ b/.github/workflows/update_protobufs.yml @@ -17,9 +17,9 @@ jobs: - name: Download nanopb run: | - wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9-linux-x86.tar.gz - tar xvzf nanopb-0.4.9-linux-x86.tar.gz - mv nanopb-0.4.9-linux-x86 nanopb-0.4.9 + wget https://jpa.kapsi.fi/nanopb/download/nanopb-0.4.9.1-linux-x86.tar.gz + tar xvzf nanopb-0.4.9.1-linux-x86.tar.gz + mv nanopb-0.4.9.1-linux-x86 nanopb-0.4.9 - name: Re-generate protocol buffers run: | diff --git a/.trunk/trunk.yaml b/.trunk/trunk.yaml index ea4045a16..f2393592c 100644 --- a/.trunk/trunk.yaml +++ b/.trunk/trunk.yaml @@ -1,36 +1,37 @@ version: 0.1 cli: - version: 1.22.6 + version: 1.22.8 plugins: sources: - id: trunk - ref: v1.6.3 + ref: v1.6.6 uri: https://github.com/trunk-io/plugins lint: enabled: - - trufflehog@3.82.6 + - prettier@3.4.2 + - trufflehog@3.86.1 - yamllint@1.35.1 - - bandit@1.7.10 - - checkov@3.2.256 - - terrascan@1.19.1 - - trivy@0.55.2 + - bandit@1.8.0 + - checkov@3.2.334 + - terrascan@1.19.9 + - trivy@0.58.0 #- trufflehog@3.63.2-rc0 - taplo@0.9.3 - - ruff@0.6.8 + - ruff@0.8.3 - isort@5.13.2 - - markdownlint@0.42.0 - - oxipng@9.1.2 + - markdownlint@0.43.0 + - oxipng@9.1.3 - svgo@3.3.2 - - actionlint@1.7.3 + - actionlint@1.7.4 - flake8@7.1.1 - - hadolint@2.12.0 + - hadolint@2.12.1-beta - shfmt@3.6.0 - shellcheck@0.10.0 - - black@24.8.0 + - black@24.10.0 - git-diff-check - - gitleaks@8.20.0 + - gitleaks@8.21.2 - clang-format@16.0.3 - - prettier@3.3.3 + #- prettier@3.3.3 ignore: - linters: [ALL] paths: @@ -39,7 +40,7 @@ runtimes: enabled: - python@3.10.8 - go@1.21.0 - - node@18.12.1 + - node@18.20.5 actions: disabled: - trunk-announce diff --git a/CODE_OF_CONDUCT.md b/CODE_OF_CONDUCT.md new file mode 100644 index 000000000..6843fc85d --- /dev/null +++ b/CODE_OF_CONDUCT.md @@ -0,0 +1,4 @@ +# Contributor Covenant Code of Conduct + +The Meshtastic Firmware project is subject to the code of conduct for the parent project, which can be found here: +https://meshtastic.org/docs/legal/conduct/ diff --git a/Dockerfile b/Dockerfile index fc34fbd4c..f3b294a5b 100644 --- a/Dockerfile +++ b/Dockerfile @@ -1,32 +1,29 @@ -FROM debian:bookworm-slim AS builder +# trunk-ignore-all(terrascan/AC_DOCKER_0002): Known terrascan issue +# trunk-ignore-all(hadolint/DL3008): Use latest version of apt packages for buildchain +# trunk-ignore-all(trivy/DS002): We must run as root for this container +# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container +# trunk-ignore-all(hadolint/DL3002): We must run as root for this container +FROM python:3.12-bookworm AS builder ENV DEBIAN_FRONTEND=noninteractive ENV TZ=Etc/UTC -# http://bugs.python.org/issue19846 -# > At the moment, setting "LANG=C" on a Linux system *fundamentally breaks Python 3*, and that's not OK. -ENV LANG C.UTF-8 - -# Install build deps -USER root - -# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue -# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain -RUN apt-get update && apt-get install --no-install-recommends -y wget python3 python3-pip python3-wheel python3-venv g++ zip git \ - ca-certificates libgpiod-dev libyaml-cpp-dev libbluetooth-dev \ - libulfius-dev liborcania-dev libssl-dev pkg-config && \ - apt-get clean && rm -rf /var/lib/apt/lists/* && mkdir /tmp/firmware - -RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh && chown mesh:mesh /tmp/firmware -USER mesh +# Install Dependencies +ENV PIP_ROOT_USER_ACTION=ignore +RUN apt-get update && apt-get install --no-install-recommends -y wget g++ zip git ca-certificates \ + libgpiod-dev libyaml-cpp-dev libbluetooth-dev libi2c-dev \ + libusb-1.0-0-dev libulfius-dev liborcania-dev libssl-dev pkg-config && \ + apt-get clean && rm -rf /var/lib/apt/lists/* && \ + pip install --no-cache-dir -U platformio==6.1.16 && \ + mkdir /tmp/firmware +# Copy source code WORKDIR /tmp/firmware -RUN python3 -m venv /tmp/firmware -RUN bash -o pipefail -c "source bin/activate; pip3 install --no-cache-dir -U platformio==6.1.15" -# trunk-ignore(terrascan/AC_DOCKER_00024): We would actually like these files to be owned by mesh tyvm -COPY --chown=mesh:mesh . /tmp/firmware -RUN bash -o pipefail -c "source ./bin/activate && bash ./bin/build-native.sh" -RUN cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd" +COPY . /tmp/firmware + +# Build +RUN bash ./bin/build-native.sh && \ + cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd" ##### PRODUCTION BUILD ############# @@ -35,20 +32,25 @@ FROM debian:bookworm-slim ENV DEBIAN_FRONTEND=noninteractive ENV TZ=Etc/UTC -# trunk-ignore(terrascan/AC_DOCKER_0002): Known terrascan issue -# trunk-ignore(hadolint/DL3008): Use latest version of packages for buildchain -RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libulfius2.7 liborcania2.3 libssl3 && \ - apt-get clean && rm -rf /var/lib/apt/lists/* +# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root +USER root -RUN groupadd -g 1000 mesh && useradd -ml -u 1000 -g 1000 mesh -USER mesh +RUN apt-get update && apt-get --no-install-recommends -y install libc-bin libc6 libgpiod2 libyaml-cpp0.7 libi2c0 libulfius2.7 libusb-1.0-0-dev liborcania2.3 libssl3 && \ + apt-get clean && rm -rf /var/lib/apt/lists/* \ + && mkdir -p /var/lib/meshtasticd \ + && mkdir -p /etc/meshtasticd/config.d -WORKDIR /home/mesh -COPY --from=builder /tmp/firmware/release/meshtasticd /home/mesh/ +# Fetch compiled binary from the builder +COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/ +# Copy config templates +COPY ./bin/config.d /etc/meshtasticd/available.d -RUN mkdir data -VOLUME /home/mesh/data +WORKDIR /var/lib/meshtasticd +VOLUME /var/lib/meshtasticd -CMD [ "sh", "-cx", "./meshtasticd -d /home/mesh/data --hwid=${HWID:-$RANDOM}" ] +# Expose Meshtastic TCP API port from the host +EXPOSE 4403 -HEALTHCHECK NONE +CMD [ "sh", "-cx", "meshtasticd -d /var/lib/meshtasticd" ] + +HEALTHCHECK NONE \ No newline at end of file diff --git a/alpine.Dockerfile b/alpine.Dockerfile new file mode 100644 index 000000000..115602b3b --- /dev/null +++ b/alpine.Dockerfile @@ -0,0 +1,42 @@ +# trunk-ignore-all(trivy/DS002): We must run as root for this container +# trunk-ignore-all(checkov/CKV_DOCKER_8): We must run as root for this container +# trunk-ignore-all(hadolint/DL3002): We must run as root for this container + +FROM python:3.12-alpine3.21 AS builder + +ENV PIP_ROOT_USER_ACTION=ignore +RUN apk add bash g++ libstdc++-dev linux-headers zip git ca-certificates libgpiod-dev yaml-cpp-dev bluez-dev \ + libusb-dev i2c-tools-dev openssl-dev pkgconf argp-standalone && \ + pip install --no-cache-dir -U platformio==6.1.16 && \ + mkdir /tmp/firmware + +WORKDIR /tmp/firmware +COPY . /tmp/firmware + +# Create small package (no debugging symbols) +# Add `argp` for musl +ENV PLATFORMIO_BUILD_FLAGS="-Os -ffunction-sections -fdata-sections -Wl,--gc-sections -largp" + +RUN bash ./bin/build-native.sh && \ + cp "/tmp/firmware/release/meshtasticd_linux_$(uname -m)" "/tmp/firmware/release/meshtasticd" + +# ##### PRODUCTION BUILD ############# + +FROM alpine:3.21 + +# nosemgrep: dockerfile.security.last-user-is-root.last-user-is-root +USER root + +RUN apk add libstdc++ libgpiod yaml-cpp libusb i2c-tools \ + && mkdir -p /var/lib/meshtasticd \ + && mkdir -p /etc/meshtasticd/config.d +COPY --from=builder /tmp/firmware/release/meshtasticd /usr/sbin/ + +WORKDIR /var/lib/meshtasticd +VOLUME /var/lib/meshtasticd + +EXPOSE 4403 + +CMD [ "sh", "-cx", "meshtasticd --fsdir=/var/lib/meshtasticd" ] + +HEALTHCHECK NONE \ No newline at end of file diff --git a/arch/esp32/esp32.ini b/arch/esp32/esp32.ini index 36d8b9542..d6a756bec 100644 --- a/arch/esp32/esp32.ini +++ b/arch/esp32/esp32.ini @@ -31,7 +31,7 @@ build_flags = -DCONFIG_BT_NIMBLE_ENABLED -DCONFIG_NIMBLE_CPP_LOG_LEVEL=2 -DCONFIG_BT_NIMBLE_MAX_CCCDS=20 - -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=5120 + -DCONFIG_BT_NIMBLE_HOST_TASK_STACK_SIZE=8192 -DESP_OPENSSL_SUPPRESS_LEGACY_WARNING -DSERIAL_BUFFER_SIZE=4096 -DLIBPAX_ARDUINO @@ -43,9 +43,10 @@ lib_deps = ${arduino_base.lib_deps} ${networking_base.lib_deps} ${environmental_base.lib_deps} + ${radiolib_base.lib_deps} https://github.com/meshtastic/esp32_https_server.git#23665b3adc080a311dcbb586ed5941b5f94d6ea2 h2zero/NimBLE-Arduino@^1.4.2 - https://github.com/dbSuS/libpax.git#7bcd3fcab75037505be9b122ab2b24cc5176b587 + https://github.com/dbinfrago/libpax.git#3cdc0371c375676a97967547f4065607d4c53fd1 lewisxhe/XPowersLib@^0.2.6 https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f rweather/Crypto@^0.4.0 diff --git a/arch/esp32/esp32c6.ini b/arch/esp32/esp32c6.ini index 53d7f92ec..3f8b1bdbe 100644 --- a/arch/esp32/esp32c6.ini +++ b/arch/esp32/esp32c6.ini @@ -23,6 +23,7 @@ lib_deps = ${arduino_base.lib_deps} ${networking_base.lib_deps} ${environmental_base.lib_deps} + ${radiolib_base.lib_deps} lewisxhe/XPowersLib@^0.2.6 https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f rweather/Crypto@^0.4.0 diff --git a/arch/nrf52/nrf52.ini b/arch/nrf52/nrf52.ini index 04880d540..57b276978 100644 --- a/arch/nrf52/nrf52.ini +++ b/arch/nrf52/nrf52.ini @@ -1,10 +1,11 @@ [nrf52_base] ; Instead of the standard nordicnrf52 platform, we use our fork which has our added variant files -platform = platformio/nordicnrf52@^10.5.0 +platform = platformio/nordicnrf52@^10.7.0 extends = arduino_base platform_packages = ; our custom Git version until they merge our PR framework-arduinoadafruitnrf52 @ https://github.com/geeksville/Adafruit_nRF52_Arduino.git + toolchain-gccarmnoneeabi@~1.90301.0 build_type = debug build_flags = @@ -14,13 +15,18 @@ build_flags = -Wno-unused-variable -Isrc/platform/nrf52 -DLFS_NO_ASSERT ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818 + -DMESHTASTIC_EXCLUDE_AUDIO=1 + -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1 + -DMAX_NUM_NODES=80 build_src_filter = ${arduino_base.build_src_filter} - - - - - - - - - - lib_deps= ${arduino_base.lib_deps} + ${radiolib_base.lib_deps} rweather/Crypto@^0.4.0 lib_ignore = - BluetoothOTA \ No newline at end of file + BluetoothOTA + lvgl \ No newline at end of file diff --git a/arch/portduino/portduino.ini b/arch/portduino/portduino.ini index 8778c32a0..aa1150e9a 100644 --- a/arch/portduino/portduino.ini +++ b/arch/portduino/portduino.ini @@ -1,6 +1,6 @@ -; The Portduino based sim environment on top of any host OS, all hardware will be simulated +; The Portduino based 'native' environment. Currently supported on Linux targets with real LoRa hardware (or simulated). [portduino_base] -platform = https://github.com/meshtastic/platform-native.git#6b3796d697481c8f6e3f4aa5c111bd9979f29e64 +platform = https://github.com/meshtastic/platform-native.git#562d189828f09fbf4c4093b3c0104bae9d8e9ff9 framework = arduino build_src_filter = @@ -23,8 +23,10 @@ build_src_filter = lib_deps = ${env.lib_deps} ${networking_base.lib_deps} + ${radiolib_base.lib_deps} rweather/Crypto@^0.4.0 - lovyan03/LovyanGFX@^1.1.16 + https://github.com/lovyan03/LovyanGFX.git#1401c28a47646fe00538d487adcb2eb3c72de805 + https://github.com/pine64/libch341-spi-userspace#a9b17e3452f7fb747000d9b4ad4409155b39f6ef build_flags = ${arduino_base.build_flags} @@ -32,6 +34,10 @@ build_flags = -Isrc/platform/portduino -DRADIOLIB_EEPROM_UNSUPPORTED -DPORTDUINO_LINUX_HARDWARE + -lpthread + -lstdc++fs -lbluetooth -lgpiod -lyaml-cpp + -li2c + -std=c++17 \ No newline at end of file diff --git a/arch/rp2xx0/rp2040.ini b/arch/rp2xx0/rp2040.ini index c004a3bec..5cfa678d5 100644 --- a/arch/rp2xx0/rp2040.ini +++ b/arch/rp2xx0/rp2040.ini @@ -1,8 +1,8 @@ ; Common settings for rp2040 Processor based targets [rp2040_base] -platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12 +platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1 extends = arduino_base -platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#4.0.3 +platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS board_build.core = earlephilhower board_build.filesystem_size = 0.5m @@ -22,4 +22,5 @@ lib_ignore = lib_deps = ${arduino_base.lib_deps} ${environmental_base.lib_deps} + ${radiolib_base.lib_deps} rweather/Crypto \ No newline at end of file diff --git a/arch/rp2xx0/rp2350.ini b/arch/rp2xx0/rp2350.ini index 96ed0cb21..c5849ff2a 100644 --- a/arch/rp2xx0/rp2350.ini +++ b/arch/rp2xx0/rp2350.ini @@ -1,8 +1,8 @@ ; Common settings for rp2040 Processor based targets [rp2350_base] -platform = https://github.com/maxgerhardt/platform-raspberrypi.git#9e55f6db5c56b9867c69fe473f388beea4546672 +platform = https://github.com/maxgerhardt/platform-raspberrypi.git#19e30129fb1428b823be585c787dcb4ac0d9014c ; For arduino-pico >=4.2.1 extends = arduino_base -platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#a6ab6e1f95bc1428d667d55ea7173c0744acc03c ; 4.0.2+ +platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#6024e9a7e82a72e38dd90f42029ba3748835eb2e ; 4.3.0 with fix MDNS board_build.core = earlephilhower board_build.filesystem_size = 0.5m @@ -16,8 +16,10 @@ build_src_filter = lib_ignore = BluetoothOTA + lvgl lib_deps = ${arduino_base.lib_deps} ${environmental_base.lib_deps} + ${radiolib_base.lib_deps} rweather/Crypto \ No newline at end of file diff --git a/arch/stm32/stm32.ini b/arch/stm32/stm32.ini index 715e8aa73..7e211496d 100644 --- a/arch/stm32/stm32.ini +++ b/arch/stm32/stm32.ini @@ -30,8 +30,9 @@ upload_protocol = stlink lib_deps = ${env.lib_deps} charlesbaynham/OSFS@^1.2.3 + jgromes/RadioLib@7.0.2 https://github.com/caveman99/Crypto.git#f61ae26a53f7a2d0ba5511625b8bf8eff3a35d5e lib_ignore = - mathertel/OneButton@~2.6.1 + mathertel/OneButton@2.6.1 Wire \ No newline at end of file diff --git a/bin/base64_to_hex.py b/bin/base64_to_hex.py new file mode 100644 index 000000000..07c559b9e --- /dev/null +++ b/bin/base64_to_hex.py @@ -0,0 +1,33 @@ +import sys +import base64 + +def base64_to_hex_string(b64_string): + try: + # Decode the Base64 string to raw bytes + decoded_bytes = base64.b64decode(b64_string) + except Exception as e: + raise ValueError(f"Invalid Base64 input: {e}") + + # Check if the decoded result is exactly 32 bytes + if len(decoded_bytes) != 32: + raise ValueError("Decoded Base64 input must be exactly 32 bytes.") + + # Convert each byte to its hex representation + hex_values = [f"0x{byte:02x}" for byte in decoded_bytes] + + # Join the formatted hex values with commas + formatted_output = "{ " + ", ".join(hex_values) + " };" + return formatted_output + +if __name__ == "__main__": + # Check if a Base64 string was provided in command line arguments + if len(sys.argv) != 2: + print("Usage: python script.py ") + sys.exit(1) + + b64_string = sys.argv[1] + try: + formatted_hex = base64_to_hex_string(b64_string) + print(formatted_hex) + except ValueError as e: + print(e) diff --git a/bin/build-esp32.sh b/bin/build-esp32.sh index adb6ab12a..f8d808ced 100755 --- a/bin/build-esp32.sh +++ b/bin/build-esp32.sh @@ -35,6 +35,11 @@ cp $SRCBIN $OUTDIR/$basename-update.bin echo "Building Filesystem for ESP32 targets" pio run --environment $1 -t buildfs +cp .pio/build/$1/littlefs.bin $OUTDIR/littlefswebui-$VERSION.bin +# Remove webserver files from the filesystem and rebuild +ls -l data/static # Diagnostic list of files +rm -rf data/static +pio run --environment $1 -t buildfs cp .pio/build/$1/littlefs.bin $OUTDIR/littlefs-$VERSION.bin cp bin/device-install.* $OUTDIR cp bin/device-update.* $OUTDIR diff --git a/bin/build-native.sh b/bin/build-native.sh index e8ed61bcf..cda77b064 100755 --- a/bin/build-native.sh +++ b/bin/build-native.sh @@ -27,5 +27,4 @@ rm -r $OUTDIR/* || true platformio pkg update --environment native || platformioFailed pio run --environment native || platformioFailed cp .pio/build/native/program "$OUTDIR/meshtasticd_linux_$(uname -m)" -cp bin/device-install.* $OUTDIR -cp bin/device-update.* $OUTDIR +cp bin/native-install.* $OUTDIR diff --git a/bin/build-userprefs-json.py b/bin/build-userprefs-json.py index 58f460bcf..d155bae01 100644 --- a/bin/build-userprefs-json.py +++ b/bin/build-userprefs-json.py @@ -24,7 +24,7 @@ def write_macros_to_json(macros, output_file): def main(): header_file = 'userPrefs.h' - output_file = 'userPrefs.json' + output_file = 'userPrefs.jsonc' # Uncomment all macros in the header file with open(header_file, 'r') as file: lines = file.readlines() diff --git a/bin/config-dist.yaml b/bin/config-dist.yaml index 3a470b7bb..49de1675b 100644 --- a/bin/config-dist.yaml +++ b/bin/config-dist.yaml @@ -1,27 +1,17 @@ +### Many device configs have been moved to /etc/meshtasticd/available.d +### To activate, simply copy or link the appropriate file into /etc/meshtasticd/config.d + ### Define your devices here using Broadcom pin numbering ### Uncomment the block that corresponds to your hardware ### Including the "Module:" line! --- Lora: -# Module: sx1262 # Waveshare SX126X XXXM -# DIO2_AS_RF_SWITCH: true -# CS: 21 -# IRQ: 16 -# Busy: 20 -# Reset: 18 -# SX126X_ANT_SW: 6 # Module: sx1262 # Waveshare SX1302 LISTEN ONLY AT THIS TIME! # CS: 7 # IRQ: 17 # Reset: 22 -# Module: sx1262 # pinedio -# CS: 0 -# IRQ: 10 -# Busy: 11 -# spidev: spidev0.1 - # Module: RF95 # Adafruit RFM9x # Reset: 25 # CS: 7 @@ -53,8 +43,6 @@ Lora: # TXen: x # TX and RX enable pins # RXen: x -# ch341_quirk: true # Uncomment this to use the chunked SPI transfer that seems to fix the ch341 - # spiSpeed: 2000000 ### Set gpio chip to use in /dev/. Defaults to 0. @@ -84,17 +72,6 @@ I2C: Display: -### Waveshare 2.8inch RPi LCD -# Panel: ST7789 -# CS: 8 -# DC: 22 # Data/Command pin -# Backlight: 18 -# Width: 240 -# Height: 320 -# Reset: 27 -# Rotate: true -# Invert: true - ### Waveshare 1.44inch LCD HAT # Panel: ST7735S # CS: 8 #Chip Select @@ -114,6 +91,29 @@ Display: # Height: 320 # Rotate: true +### SHCHV 3.5 RPi TFT+Touchscreen +# Panel: ILI9486 +# spidev: spidev0.0 +# BusFrequency: 30000000 +# DC: 24 +# Reset: 25 +# Width: 320 +# Height: 480 +# OffsetRotate: 2 + +### TZT 2.0 Inch TFT Display ST7789V 240RGBx320 +# Panel: ST7789 +# spidev: spidev0.0 +# # CS: 8 # can be freely chosen +# BusFrequency: 80000000 +# DC: 24 # can be freely chosen +# Width: 320 +# Height: 240 +# Reset: 25 # can be freely chosen +# Rotate: true +# OffsetRotate: 1 +# Invert: true + ### You can also specify the spi device for the display to use # spidev: spidev0.0 @@ -128,10 +128,6 @@ Touchscreen: # IRQ: 24 # I2CAddr: 0x38 -# Module: XPT2046 # Waveshare 2.8inch -# CS: 7 -# IRQ: 17 - ### You can also specify the spi device for the touchscreen to use # spidev: spidev0.0 @@ -150,8 +146,11 @@ Logging: Webserver: # Port: 443 # Port for Webserver & Webservices -# RootPath: /usr/share/doc/meshtasticd/web # Root Dir of WebServer +# RootPath: /usr/share/meshtasticd/web # Root Dir of WebServer General: MaxNodes: 200 - MaxMessageQueue: 100 \ No newline at end of file + MaxMessageQueue: 100 + ConfigDirectory: /etc/meshtasticd/config.d/ +# MACAddress: AA:BB:CC:DD:EE:FF +# MACAddressSource: eth0 \ No newline at end of file diff --git a/bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml b/bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml new file mode 100644 index 000000000..ca5b27ebc --- /dev/null +++ b/bin/config.d/OpenWRT-One-mikroBUS-LR-IOT-CLICK.yaml @@ -0,0 +1,9 @@ +## https://www.mikroe.com/lr-iot-click +Lora: + Module: lr1110 # OpenWRT ONE mikroBUS with LR-IOT-CLICK +# CS: 25 + IRQ: 10 + Busy: 12 +# Reset: 2 + spidev: spidev2.0 + DIO3_TCXO_VOLTAGE: 1.6 diff --git a/bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml b/bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml new file mode 100644 index 000000000..6dc1e870d --- /dev/null +++ b/bin/config.d/OpenWRT_One_mikroBUS_sx1262.yaml @@ -0,0 +1,8 @@ +Lora: + Module: sx1262 + IRQ: 10 + Busy: 12 +# Reset: 2 + spidev: spidev2.0 + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: true diff --git a/bin/config.d/display-waveshare-2.8.yaml b/bin/config.d/display-waveshare-2.8.yaml new file mode 100644 index 000000000..2e28276d8 --- /dev/null +++ b/bin/config.d/display-waveshare-2.8.yaml @@ -0,0 +1,18 @@ +Display: + +### Waveshare 2.8inch RPi LCD + Panel: ST7789 + CS: 8 + DC: 22 # Data/Command pin + Backlight: 18 + Width: 240 + Height: 320 + Reset: 27 + Rotate: true + Invert: true + +Touchscreen: +### Note, at least for now, the touchscreen must have a CS pin defined, even if you let Linux manage the CS switching. + Module: XPT2046 # Waveshare 2.8inch + CS: 7 + IRQ: 17 \ No newline at end of file diff --git a/bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml b/bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml new file mode 100644 index 000000000..7aa860f61 --- /dev/null +++ b/bin/config.d/femtofox/femtofox_LR1121_TCXO.yaml @@ -0,0 +1,20 @@ +--- +Lora: +## Ebyte E80-900M22S +## This is a bit experimental +## +## + Module: lr1121 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO3_TCXO_VOLTAGE: 1.8 + CS: 16 #pin6 / GPIO48 1C0 + IRQ: 23 #pin17 / GPIO55 1C7 + Busy: 22 #pin16 / GPIO54 1C6 + Reset: 25 #pin13 / GPIO57 1D1 + + + spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19) + spiSpeed: 2000000 + +General: + MACAddressSource: eth0 diff --git a/bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml b/bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml new file mode 100644 index 000000000..a4dec870a --- /dev/null +++ b/bin/config.d/femtofox/femtofox_SX1262_TCXO.yaml @@ -0,0 +1,21 @@ +--- +Lora: +## Ebyte E22-900M30S, E22-900M22S with or without external RF switching setup +## HT-RA62 (Has internal switching, but whatever) +## Seeed WIO SX1262 (already has TXEN-DIO2 link, but needs RXEN) +## Will work with any module with or without RF switching, and with TCXO + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: true + CS: 16 #pin6 / GPIO48 1C0 + IRQ: 23 #pin17 / GPIO55 1C7 + Busy: 22 #pin16 / GPIO54 1C6 + Reset: 25 #pin13 / GPIO57 1D1 + RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things? +# TXen: bridge to DIO2 on E22 module + spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19) + spiSpeed: 2000000 + +General: + MACAddressSource: eth0 diff --git a/bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml b/bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml new file mode 100644 index 000000000..6b956f3e3 --- /dev/null +++ b/bin/config.d/femtofox/femtofox_SX1262_XTAL.yaml @@ -0,0 +1,21 @@ +--- +Lora: +## Ebyte E22-900MM22S with no external RF switching setup +## Waveshare SX126X XXXM, AI Thinker RA-01SH +## Will work with any module with or without RF switching and no TCXO + + Module: sx1262 + gpiochip: 1 # subtract 32 from the gpio numbers + DIO2_AS_RF_SWITCH: true + DIO3_TCXO_VOLTAGE: false + CS: 16 #pin6 / GPIO48 1C0 + IRQ: 23 #pin17 / GPIO55 1C7 + Busy: 22 #pin16 / GPIO54 1C6 + Reset: 25 #pin13 / GPIO57 1D1 + RXen: 24 #pin12 / GPIO56 1D0 # Not strictly needed for auto-switching, but why complicate things? +# TXen: bridge to DIO2 on E22 module + spidev: spidev0.0 #pins are (CS=16, CLK=17, MOSI=18, MISO=19) + spiSpeed: 2000000 + +General: + MACAddressSource: eth0 diff --git a/bin/config.d/lora-MeshAdv-900M30S.yaml b/bin/config.d/lora-MeshAdv-900M30S.yaml new file mode 100644 index 000000000..07dada620 --- /dev/null +++ b/bin/config.d/lora-MeshAdv-900M30S.yaml @@ -0,0 +1,9 @@ +Lora: + Module: sx1262 + CS: 21 + IRQ: 16 + Busy: 20 + Reset: 18 + TXen: 13 + RXen: 12 + DIO3_TCXO_VOLTAGE: true diff --git a/bin/config.d/lora-meshstick-1262.yaml b/bin/config.d/lora-meshstick-1262.yaml new file mode 100644 index 000000000..3f8d6c617 --- /dev/null +++ b/bin/config.d/lora-meshstick-1262.yaml @@ -0,0 +1,11 @@ +Lora: + Module: sx1262 + CS: 0 + IRQ: 6 + Reset: 2 + Busy: 4 + spidev: ch341 + DIO3_TCXO_VOLTAGE: true +# USB_Serialnum: 12345678 + USB_PID: 0x5512 + USB_VID: 0x1A86 diff --git a/bin/config.d/lora-pinedio-usb-sx1262.yaml b/bin/config.d/lora-pinedio-usb-sx1262.yaml new file mode 100644 index 000000000..6b8a9fc95 --- /dev/null +++ b/bin/config.d/lora-pinedio-usb-sx1262.yaml @@ -0,0 +1,5 @@ +Lora: + Module: sx1262 + CS: 0 + IRQ: 10 + spidev: ch341 \ No newline at end of file diff --git a/bin/config.d/lora-waveshare-sxxx.yaml b/bin/config.d/lora-waveshare-sxxx.yaml new file mode 100644 index 000000000..a9ff13653 --- /dev/null +++ b/bin/config.d/lora-waveshare-sxxx.yaml @@ -0,0 +1,8 @@ +Lora: + Module: sx1262 # Waveshare SX126X XXXM + DIO2_AS_RF_SWITCH: true + CS: 21 + IRQ: 16 + Busy: 20 + Reset: 18 + SX126X_ANT_SW: 6 diff --git a/bin/device-install.bat b/bin/device-install.bat index 6c880185e..c18be89a8 100755 --- a/bin/device-install.bat +++ b/bin/device-install.bat @@ -1,16 +1,26 @@ @ECHO OFF set PYTHON=python +set WEB_APP=0 + +:: Determine the correct esptool command to use +where esptool >nul 2>&1 +if %ERRORLEVEL% EQU 0 ( + set "ESPTOOL_CMD=esptool" +) else ( + set "ESPTOOL_CMD=%PYTHON% -m esptool" +) goto GETOPTS :HELP -echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] +echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] [--web] echo Flash image file to device, but first erasing and writing system information echo. echo -h Display this help and exit echo -p ESPTOOL_PORT Set the environment variable for ESPTOOL_PORT. If not set, ESPTOOL iterates all ports (Dangerrous). echo -P PYTHON Specify alternate python interpreter to use to invoke esptool. (Default: %PYTHON%) echo -f FILENAME The .bin file to flash. Custom to your device type and region. +echo --web Flash WEB APP. goto EOF :GETOPTS @@ -19,37 +29,44 @@ if /I "%1"=="--help" goto HELP if /I "%1"=="-F" set "FILENAME=%2" & SHIFT if /I "%1"=="-p" set ESPTOOL_PORT=%2 & SHIFT if /I "%1"=="-P" set PYTHON=%2 & SHIFT +if /I "%1"=="--web" set WEB_APP=1 & SHIFT SHIFT IF NOT "__%1__"=="____" goto GETOPTS IF "__%FILENAME%__" == "____" ( echo "Missing FILENAME" - goto HELP + goto HELP ) IF EXIST %FILENAME% IF x%FILENAME:update=%==x%FILENAME% ( echo Trying to flash update %FILENAME%, but first erasing and writing system information" - %PYTHON% -m esptool --baud 115200 erase_flash - %PYTHON% -m esptool --baud 115200 write_flash 0x00 %FILENAME% + %ESPTOOL_CMD% --baud 115200 erase_flash + %ESPTOOL_CMD% --baud 115200 write_flash 0x00 %FILENAME% @REM Account for S3 and C3 board's different OTA partition IF x%FILENAME:s3=%==x%FILENAME% IF x%FILENAME:v3=%==x%FILENAME% IF x%FILENAME:t-deck=%==x%FILENAME% IF x%FILENAME:wireless-paper=%==x%FILENAME% IF x%FILENAME:wireless-tracker=%==x%FILENAME% IF x%FILENAME:station-g2=%==x%FILENAME% IF x%FILENAME:unphone=%==x%FILENAME% ( IF x%FILENAME:esp32c3=%==x%FILENAME% ( - %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota.bin + %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota.bin ) else ( - %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-c3.bin + %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-c3.bin ) - ) else ( - %PYTHON% -m esptool --baud 115200 write_flash 0x260000 bleota-s3.bin + ) else ( + %ESPTOOL_CMD% --baud 115200 write_flash 0x260000 bleota-s3.bin ) - for %%f in (littlefs-*.bin) do ( - %PYTHON% -m esptool --baud 115200 write_flash 0x300000 %%f + IF %WEB_APP%==1 ( + for %%f in (littlefswebui-*.bin) do ( + %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f + ) + ) else ( + for %%f in (littlefs-*.bin) do ( + %ESPTOOL_CMD% --baud 115200 write_flash 0x300000 %%f + ) ) ) else ( echo "Invalid file: %FILENAME%" - goto HELP + goto HELP ) else ( echo "Invalid file: %FILENAME%" - goto HELP + goto HELP ) :EOF diff --git a/bin/device-install.sh b/bin/device-install.sh index 563a87af4..e09c61ba6 100755 --- a/bin/device-install.sh +++ b/bin/device-install.sh @@ -1,22 +1,45 @@ #!/bin/sh PYTHON=${PYTHON:-$(which python3 python | head -n 1)} +WEB_APP=false + +# Determine the correct esptool command to use +if "$PYTHON" -m esptool version >/dev/null 2>&1; then + ESPTOOL_CMD="$PYTHON -m esptool" +elif command -v esptool >/dev/null 2>&1; then + ESPTOOL_CMD="esptool" +elif command -v esptool.py >/dev/null 2>&1; then + ESPTOOL_CMD="esptool.py" +else + echo "Error: esptool not found" + exit 1 +fi set -e # Usage info show_help() { cat <nul 2>&1 +if %ERRORLEVEL% EQU 0 ( + set "ESPTOOL_CMD=esptool" +) else ( + set "ESPTOOL_CMD=%PYTHON% -m esptool" +) + goto GETOPTS :HELP echo Usage: %~nx0 [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME^|FILENAME] @@ -24,17 +32,17 @@ IF NOT "__%1__"=="____" goto GETOPTS IF "__%FILENAME%__" == "____" ( echo "Missing FILENAME" - goto HELP + goto HELP ) IF EXIST %FILENAME% IF NOT x%FILENAME:update=%==x%FILENAME% ( echo Trying to flash update %FILENAME% - %PYTHON% -m esptool --baud 115200 write_flash 0x10000 %FILENAME% + %ESPTOOL_CMD% --baud 115200 write_flash 0x10000 %FILENAME% ) else ( echo "Invalid file: %FILENAME%" - goto HELP + goto HELP ) else ( echo "Invalid file: %FILENAME%" - goto HELP + goto HELP ) :EOF diff --git a/bin/device-update.sh b/bin/device-update.sh index 7233f61f6..67281dc4f 100755 --- a/bin/device-update.sh +++ b/bin/device-update.sh @@ -2,6 +2,18 @@ PYTHON=${PYTHON:-$(which python3 python|head -n 1)} +# Determine the correct esptool command to use +if "$PYTHON" -m esptool version >/dev/null 2>&1; then + ESPTOOL_CMD="$PYTHON -m esptool" +elif command -v esptool >/dev/null 2>&1; then + ESPTOOL_CMD="esptool" +elif command -v esptool.py >/dev/null 2>&1; then + ESPTOOL_CMD="esptool.py" +else + echo "Error: esptool not found" + exit 1 +fi + # Usage info show_help() { cat << EOF @@ -9,7 +21,7 @@ Usage: $(basename $0) [-h] [-p ESPTOOL_PORT] [-P PYTHON] [-f FILENAME|FILENAME] Flash image file to device, leave existing system intact." -h Display this help and exit - -p ESPTOOL_PORT Set the environment variable for ESPTOOL_PORT. If not set, ESPTOOL iterates all ports (Dangerrous). + -p ESPTOOL_PORT Set the environment variable for ESPTOOL_PORT. If not set, ESPTOOL iterates all ports (Dangerous). -P PYTHON Specify alternate python interpreter to use to invoke esptool. (Default: "$PYTHON") -f FILENAME The *update.bin file to flash. Custom to your device type. @@ -30,7 +42,7 @@ while getopts ":hp:P:f:" opt; do f) FILENAME=${OPTARG} ;; *) - echo "Invalid flag." + echo "Invalid flag." show_help >&2 exit 1 ;; @@ -45,7 +57,7 @@ shift "$((OPTIND-1))" if [ -f "${FILENAME}" ] && [ -z "${FILENAME##*"update"*}" ]; then printf "Trying to flash update ${FILENAME}" - $PYTHON -m esptool --baud 115200 write_flash 0x10000 ${FILENAME} + $ESPTOOL_CMD --baud 115200 write_flash 0x10000 ${FILENAME} else show_help echo "Invalid file: ${FILENAME}" diff --git a/bin/meshtasticd.service b/bin/meshtasticd.service index f15fdc871..1e8ee98b8 100644 --- a/bin/meshtasticd.service +++ b/bin/meshtasticd.service @@ -1,12 +1,16 @@ [Unit] Description=Meshtastic Native Daemon After=network-online.target +StartLimitInterval=200 +StartLimitBurst=5 [Service] User=root Group=root Type=simple ExecStart=/usr/sbin/meshtasticd +Restart=always +RestartSec=3 [Install] -WantedBy=multi-user.target \ No newline at end of file +WantedBy=multi-user.target diff --git a/bin/native-install.sh b/bin/native-install.sh index ba71c4f46..a8fcc29a6 100755 --- a/bin/native-install.sh +++ b/bin/native-install.sh @@ -1,7 +1,7 @@ #!/usr/bin/env bash cp "release/meshtasticd_linux_$(uname -m)" /usr/sbin/meshtasticd -mkdir /etc/meshtasticd +mkdir -p /etc/meshtasticd if [[ -f "/etc/meshtasticd/config.yaml" ]]; then cp bin/config-dist.yaml /etc/meshtasticd/config-upgrade.yaml else diff --git a/bin/platformio-custom.py b/bin/platformio-custom.py index 0f099c09a..acfeae10c 100644 --- a/bin/platformio-custom.py +++ b/bin/platformio-custom.py @@ -3,6 +3,8 @@ # trunk-ignore-all(flake8/F821): For SConstruct imports import sys from os.path import join +import json +import re from readprops import readProps @@ -88,12 +90,39 @@ Import("projenv") prefsLoc = projenv["PROJECT_DIR"] + "/version.properties" verObj = readProps(prefsLoc) -print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"]) +print("Using meshtastic platformio-custom.py, firmware version " + verObj["long"] + " on " + env.get("PIOENV")) + +jsonLoc = env["PROJECT_DIR"] + "/userPrefs.jsonc" +with open(jsonLoc) as f: + jsonStr = re.sub("//.*","", f.read(), flags=re.MULTILINE) + userPrefs = json.loads(jsonStr) + +pref_flags = [] +# Pre-process the userPrefs +for pref in userPrefs: + if userPrefs[pref].startswith("{"): + pref_flags.append("-D" + pref + "=" + userPrefs[pref]) + elif userPrefs[pref].replace(".", "").isdigit(): + pref_flags.append("-D" + pref + "=" + userPrefs[pref]) + elif userPrefs[pref] == "true" or userPrefs[pref] == "false": + pref_flags.append("-D" + pref + "=" + userPrefs[pref]) + elif userPrefs[pref].startswith("meshtastic_"): + pref_flags.append("-D" + pref + "=" + userPrefs[pref]) + # If the value is a string, we need to wrap it in quotes + else: + pref_flags.append("-D" + pref + "=" + env.StringifyMacro(userPrefs[pref]) + "") # General options that are passed to the C and C++ compilers -projenv.Append( - CCFLAGS=[ +flags = [ "-DAPP_VERSION=" + verObj["long"], "-DAPP_VERSION_SHORT=" + verObj["short"], - ] -) + "-DAPP_ENV=" + env.get("PIOENV"), + ] + pref_flags + +print ("Using flags:") +for flag in flags: + print(flag) + +projenv.Append( + CCFLAGS=flags, +) \ No newline at end of file diff --git a/boards/bpi_picow_esp32_s3.json b/boards/bpi_picow_esp32_s3.json index 9a20dd57f..75983d845 100644 --- a/boards/bpi_picow_esp32_s3.json +++ b/boards/bpi_picow_esp32_s3.json @@ -28,6 +28,8 @@ "flash_size": "8MB", "maximum_ram_size": 327680, "maximum_size": 8388608, + "use_1200bps_touch": true, + "wait_for_upload_port": true, "require_upload_port": true, "speed": 921600 }, diff --git a/boards/esp32-s3-zero.json b/boards/esp32-s3-zero.json new file mode 100644 index 000000000..76cb34fa0 --- /dev/null +++ b/boards/esp32-s3-zero.json @@ -0,0 +1,41 @@ +{ + "build": { + "arduino": { + "partitions": "default.csv", + "memory_type": "qio_qspi" + }, + "core": "esp32", + "extra_flags": [ + "-DARDUINO_ESP32S3_DEV", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=1", + "-DARDUINO_USB_CDC_ON_BOOT=1", + "-DBOARD_HAS_PSRAM" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "psram_type": "qio", + "hwids": [["0x303A", "0x1001"]], + "mcu": "esp32s3", + "variant": "esp32s3" + }, + "connectivity": ["wifi", "bluetooth"], + "debug": { + "default_tool": "esp-builtin", + "onboard_tools": ["esp-builtin"], + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino", "espidf"], + "platforms": ["espressif32"], + "name": "Espressif ESP32-S3-FH4R2 (4 MB QD, 2MB PSRAM)", + "upload": { + "flash_size": "4MB", + "maximum_ram_size": 327680, + "maximum_size": 4194304, + "require_upload_port": true, + "speed": 921600 + }, + "url": "https://docs.espressif.com/projects/esp-idf/en/latest/esp32s3/hw-reference/esp32s3/user-guide-devkitc-1.html", + "vendor": "Espressif" +} diff --git a/boards/icarus.json b/boards/icarus.json new file mode 100644 index 000000000..03da4682f --- /dev/null +++ b/boards/icarus.json @@ -0,0 +1,41 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "memory_type": "qio_opi" + }, + "core": "esp32", + "extra_flags": [ + "-DBOARD_HAS_PSRAM", + "-DARDUINO_USB_CDC_ON_BOOT=1", + "-DARDUINO_USB_MODE=0", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=0" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "hwids": [["0x2886", "0x0059"]], + "mcu": "esp32s3", + "variant": "icarus" + }, + "connectivity": ["wifi", "bluetooth", "lora"], + "debug": { + "default_tool": "esp-builtin", + "onboard_tools": ["esp-builtin"], + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino", "espidf"], + "name": "icarus", + "upload": { + "flash_size": "8MB", + "maximum_ram_size": 8388608, + "maximum_size": 8388608, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "require_upload_port": true, + "speed": 921600 + }, + "url": "https://icarus.azlan.works", + "vendor": "Muhammad Shah" +} diff --git a/boards/mesh-tab.json b/boards/mesh-tab.json new file mode 100644 index 000000000..52c65bf77 --- /dev/null +++ b/boards/mesh-tab.json @@ -0,0 +1,42 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "partitions": "default_16MB.csv", + "memory_type": "qio_qspi" + }, + "core": "esp32", + "extra_flags": [ + "-DBOARD_HAS_PSRAM", + "-DARDUINO_USB_CDC_ON_BOOT=1", + "-DARDUINO_USB_MODE=0", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=1" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "hwids": [["0x303A", "0x80D6"]], + "mcu": "esp32s3", + "variant": "mesh-tab" + }, + "connectivity": ["wifi", "bluetooth", "lora"], + "debug": { + "default_tool": "esp-builtin", + "onboard_tools": ["esp-builtin"], + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino", "espidf"], + "name": "ESP32-S3 WROOM-1 N16R2 (16 MB FLASH, 2 MB PSRAM)", + "upload": { + "flash_size": "16MB", + "maximum_ram_size": 327680, + "maximum_size": 16777216, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "require_upload_port": true, + "speed": 460800 + }, + "url": "https://github.com/valzzu/Mesh-Tab", + "vendor": "Espressif" +} diff --git a/boards/seeed-sensecap-indicator.json b/boards/seeed-sensecap-indicator.json index 3fc57126f..0a02fc882 100644 --- a/boards/seeed-sensecap-indicator.json +++ b/boards/seeed-sensecap-indicator.json @@ -15,10 +15,12 @@ ], "f_cpu": "240000000L", "f_flash": "80000000L", + "f_boot": "120000000L", + "boot": "qio", "flash_mode": "qio", "hwids": [["0x1A86", "0x7523"]], "mcu": "esp32s3", - "variant": "esp32s3r8" + "variant": "esp32s3" }, "connectivity": ["wifi", "bluetooth", "lora"], "debug": { @@ -32,9 +34,9 @@ "flash_size": "8MB", "maximum_ram_size": 327680, "maximum_size": 8388608, - "require_upload_port": true, + "require_upload_port": false, "use_1200bps_touch": true, - "wait_for_upload_port": true, + "wait_for_upload_port": false, "speed": 921600 }, "url": "https://www.seeedstudio.com/Indicator-for-Meshtastic.html", diff --git a/boards/t-deck.json b/boards/t-deck.json index d62ec48e6..b112921b9 100644 --- a/boards/t-deck.json +++ b/boards/t-deck.json @@ -10,7 +10,7 @@ "-DARDUINO_USB_CDC_ON_BOOT=1", "-DARDUINO_USB_MODE=0", "-DARDUINO_RUNNING_CORE=1", - "-DARDUINO_EVENT_RUNNING_CORE=0" + "-DARDUINO_EVENT_RUNNING_CORE=1" ], "f_cpu": "240000000L", "f_flash": "80000000L", diff --git a/boards/t-echo.json b/boards/t-echo.json index fcfc8c50b..f891da94f 100644 --- a/boards/t-echo.json +++ b/boards/t-echo.json @@ -48,6 +48,6 @@ "require_upload_port": true, "wait_for_upload_port": true }, - "url": "FIXME", - "vendor": "TTGO" + "url": "https://lilygo.cc/products/t-echo-lilygo", + "vendor": "LILYGO" } diff --git a/boards/unphone.json b/boards/unphone.json new file mode 100644 index 000000000..bf711993c --- /dev/null +++ b/boards/unphone.json @@ -0,0 +1,46 @@ +{ + "build": { + "arduino": { + "ldscript": "esp32s3_out.ld", + "memory_type": "qio_opi", + "partitions": "default_8MB.csv" + }, + "core": "esp32", + "extra_flags": [ + "-DBOARD_HAS_PSRAM", + "-DUNPHONE_SPIN=9", + "-DARDUINO_USB_CDC_ON_BOOT=1", + "-DARDUINO_USB_MODE=0", + "-DARDUINO_RUNNING_CORE=1", + "-DARDUINO_EVENT_RUNNING_CORE=1" + ], + "f_cpu": "240000000L", + "f_flash": "80000000L", + "flash_mode": "qio", + "hwids": [ + ["0x16D0", "0x1178"], + ["0x303a", "0x1001"] + ], + "mcu": "esp32s3", + "variant": "unphone" + }, + "connectivity": ["wifi", "bluetooth", "lora"], + "debug": { + "default_tool": "esp-builtin", + "onboard_tools": ["esp-builtin"], + "openocd_target": "esp32s3.cfg" + }, + "frameworks": ["arduino", "espidf"], + "name": "unPhone", + "upload": { + "flash_size": "8MB", + "maximum_ram_size": 327680, + "maximum_size": 8323072, + "use_1200bps_touch": true, + "wait_for_upload_port": true, + "require_upload_port": true, + "speed": 921600 + }, + "url": "https://unphone.net/", + "vendor": "University of Sheffield" +} diff --git a/docker-compose.yml b/docker-compose.yml index 82f2647e8..4aac318c5 100644 --- a/docker-compose.yml +++ b/docker-compose.yml @@ -1,13 +1,26 @@ -version: "3.7" +# USB-Based Meshtastic container-node! + +# Copy .env.example to .env and set the USB_DEVICE and CONFIG_PATH variables services: meshtastic-node: build: . - deploy: - mode: replicated - replicas: 4 - networks: - - mesh + container_name: meshtasticd -networks: - mesh: + # Pass USB device through to the container + devices: + - "${USB_DEVICE}" + + # Mount local config file and named volume for data persistence + volumes: + - "${CONFIG_PATH}:/etc/meshtasticd/config.yaml:ro" + - meshtastic_data:/var/lib/meshtasticd + + # Forward the container’s port 4403 to the host + ports: + - 4403:4403 + + restart: unless-stopped + +volumes: + meshtastic_data: diff --git a/platformio.ini b/platformio.ini index 2e3ee56f9..bf50b7646 100644 --- a/platformio.ini +++ b/platformio.ini @@ -16,6 +16,7 @@ default_envs = tbeam ;default_envs = tlora-v2 ;default_envs = tlora-v2-1-1_6 ;default_envs = tlora-v2-1-1_6-tcxo +;default_envs = tlora-v3-3-0-tcxo ;default_envs = tlora-t3s3-v1 ;default_envs = t-echo ;default_envs = canaryone @@ -29,138 +30,138 @@ default_envs = tbeam ;default_envs = rak4631 ;default_envs = rak4631_eth_gw ;default_envs = rak2560 -;default_envs = rak10701 +;default_envs = rak_wismeshtap ;default_envs = wio-e5 ;default_envs = radiomaster_900_bandit_nano ;default_envs = radiomaster_900_bandit_micro ;default_envs = radiomaster_900_bandit -;default_envs = heltec_capsule_sensor_v3 ;default_envs = heltec_vision_master_t190 ;default_envs = heltec_vision_master_e213 ;default_envs = heltec_vision_master_e290 ;default_envs = heltec_mesh_node_t114 - extra_configs = - arch/*/*.ini - variants/*/platformio.ini + arch/*/*.ini + variants/*/platformio.ini +description = Meshtastic [env] test_build_src = true extra_scripts = bin/platformio-custom.py - ; note: we add src to our include search path so that lmic_project_config can override ; note: TINYGPS_OPTION_NO_CUSTOM_FIELDS is VERY important. We don't use custom fields and somewhere in that pile ; of code is a heap corruption bug! ; FIXME: fix lib/BluetoothOTA dependency back on src/ so we can remove -Isrc ; The Radiolib stuff will speed up building considerably. Exclud all the stuff we dont need. build_flags = -Wno-missing-field-initializers - -Wno-format - -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map - -DUSE_THREAD_NAMES - -DTINYGPS_OPTION_NO_CUSTOM_FIELDS - -DPB_ENABLE_MALLOC=1 - -DRADIOLIB_EXCLUDE_CC1101=1 - -DRADIOLIB_EXCLUDE_NRF24=1 - -DRADIOLIB_EXCLUDE_RF69=1 - -DRADIOLIB_EXCLUDE_SX1231=1 - -DRADIOLIB_EXCLUDE_SX1233=1 - -DRADIOLIB_EXCLUDE_SI443X=1 - -DRADIOLIB_EXCLUDE_RFM2X=1 - -DRADIOLIB_EXCLUDE_AFSK=1 - -DRADIOLIB_EXCLUDE_BELL=1 - -DRADIOLIB_EXCLUDE_HELLSCHREIBER=1 - -DRADIOLIB_EXCLUDE_MORSE=1 - -DRADIOLIB_EXCLUDE_RTTY=1 - -DRADIOLIB_EXCLUDE_SSTV=1 - -DRADIOLIB_EXCLUDE_AX25=1 - -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1 - -DRADIOLIB_EXCLUDE_BELL=1 - -DRADIOLIB_EXCLUDE_PAGER=1 - -DRADIOLIB_EXCLUDE_FSK4=1 - -DRADIOLIB_EXCLUDE_APRS=1 - -DRADIOLIB_EXCLUDE_LORAWAN=1 - -DMESHTASTIC_EXCLUDE_DROPZONE=1 - -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1 - #-DBUILD_EPOCH=$UNIX_TIME - ;-D OLED_PL + + -Wno-format + -Isrc -Isrc/mesh -Isrc/mesh/generated -Isrc/gps -Isrc/buzz -Wl,-Map,.pio/build/output.map + -DUSE_THREAD_NAMES + -DTINYGPS_OPTION_NO_CUSTOM_FIELDS + -DPB_ENABLE_MALLOC=1 + -DRADIOLIB_EXCLUDE_CC1101=1 + -DRADIOLIB_EXCLUDE_NRF24=1 + -DRADIOLIB_EXCLUDE_RF69=1 + -DRADIOLIB_EXCLUDE_SX1231=1 + -DRADIOLIB_EXCLUDE_SX1233=1 + -DRADIOLIB_EXCLUDE_SI443X=1 + -DRADIOLIB_EXCLUDE_RFM2X=1 + -DRADIOLIB_EXCLUDE_AFSK=1 + -DRADIOLIB_EXCLUDE_BELL=1 + -DRADIOLIB_EXCLUDE_HELLSCHREIBER=1 + -DRADIOLIB_EXCLUDE_MORSE=1 + -DRADIOLIB_EXCLUDE_RTTY=1 + -DRADIOLIB_EXCLUDE_SSTV=1 + -DRADIOLIB_EXCLUDE_AX25=1 + -DRADIOLIB_EXCLUDE_DIRECT_RECEIVE=1 + -DRADIOLIB_EXCLUDE_BELL=1 + -DRADIOLIB_EXCLUDE_PAGER=1 + -DRADIOLIB_EXCLUDE_FSK4=1 + -DRADIOLIB_EXCLUDE_APRS=1 + -DRADIOLIB_EXCLUDE_LORAWAN=1 + -DMESHTASTIC_EXCLUDE_DROPZONE=1 + -DMESHTASTIC_EXCLUDE_REMOTEHARDWARE=1 + -DMESHTASTIC_EXCLUDE_HEALTH_TELEMETRY=1 + -DMESHTASTIC_EXCLUDE_POWERSTRESS=1 ; exclude power stress test module from main firmware + #-DBUILD_EPOCH=$UNIX_TIME + ;-D OLED_PL monitor_speed = 115200 monitor_filters = direct - lib_deps = - jgromes/RadioLib@~7.0.2 - https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 ; ESP8266_SSD1306 - mathertel/OneButton@~2.6.1 ; OneButton library for non-blocking button debounce - https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159 - https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4 - https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0 - nanopb/Nanopb@^0.4.9 - erriez/ErriezCRC32@^1.0.1 - + https://github.com/meshtastic/esp8266-oled-ssd1306.git#e16cee124fe26490cb14880c679321ad8ac89c95 + mathertel/OneButton@2.6.1 + https://github.com/meshtastic/arduino-fsm.git#7db3702bf0cfe97b783d6c72595e3f38e0b19159 + https://github.com/meshtastic/TinyGPSPlus.git#71a82db35f3b973440044c476d4bcdc673b104f4 + https://github.com/meshtastic/ArduinoThread.git#1ae8778c85d0a2a729f989e0b1e7d7c4dc84eef0 + nanopb/Nanopb@0.4.9 + erriez/ErriezCRC32@1.0.1 + ; Used for the code analysis in PIO Home / Inspect check_tool = cppcheck check_skip_packages = yes check_flags = - -DAPP_VERSION=1.0.0 - --suppressions-list=suppressions.txt - --inline-suppr + -DAPP_VERSION=1.0.0 + --suppressions-list=suppressions.txt + --inline-suppr ; Common settings for conventional (non Portduino) Arduino targets [arduino_base] framework = arduino lib_deps = - ${env.lib_deps} - end2endzone/NonBlockingRTTTL@^1.3.0 - https://github.com/meshtastic/SparkFun_ATECCX08a_Arduino_Library.git#5cf62b36c6f30bc72a07bdb2c11fc9a22d1e31da - + ${env.lib_deps} + end2endzone/NonBlockingRTTTL@1.3.0 build_flags = ${env.build_flags} -Os build_src_filter = ${env.build_src_filter} - ; Common libs for communicating over TCP/IP networks such as MQTT [networking_base] lib_deps = - knolleary/PubSubClient@^2.8 - arduino-libraries/NTPClient@^3.1.0 - arcao/Syslog@^2.0.0 + knolleary/PubSubClient@2.8 + arduino-libraries/NTPClient@3.1.0 + arcao/Syslog@2.0.0 + +[radiolib_base] +lib_deps = + jgromes/RadioLib@7.1.0 ; Common libs for environmental measurements in telemetry module ; (not included in native / portduino) [environmental_base] lib_deps = - adafruit/Adafruit BusIO@^1.16.1 - adafruit/Adafruit Unified Sensor@^1.1.11 - adafruit/Adafruit BMP280 Library@^2.6.8 - adafruit/Adafruit BMP085 Library@^1.2.4 - adafruit/Adafruit BME280 Library@^2.2.2 - adafruit/Adafruit BMP3XX Library@^2.1.5 - adafruit/Adafruit MCP9808 Library@^2.0.0 - adafruit/Adafruit INA260 Library@^1.5.0 - adafruit/Adafruit INA219@^1.2.0 - adafruit/Adafruit MAX1704X@^1.0.3 - adafruit/Adafruit SHTC3 Library@^1.0.0 - adafruit/Adafruit LPS2X@^2.0.4 - adafruit/Adafruit SHT31 Library@^2.2.2 - adafruit/Adafruit PM25 AQI Sensor@^1.1.1 - adafruit/Adafruit MPU6050@^2.2.4 - adafruit/Adafruit LIS3DH@^1.3.0 - adafruit/Adafruit AHTX0@^2.0.5 - adafruit/Adafruit LSM6DS@^4.7.2 - adafruit/Adafruit VEML7700 Library@^2.1.6 - adafruit/Adafruit SHT4x Library@^1.0.4 - adafruit/Adafruit TSL2591 Library@^1.4.5 - sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@^1.0.5 - sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@^1.2.13 - ClosedCube OPT3001@^1.1.2 - emotibit/EmotiBit MLX90632@^1.0.8 - dfrobot/DFRobot_RTU@^1.0.3 - sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@^1.1.2 - adafruit/Adafruit MLX90614 Library@^2.1.5 + adafruit/Adafruit BusIO@1.16.2 + adafruit/Adafruit Unified Sensor@1.1.14 + adafruit/Adafruit BMP280 Library@2.6.8 + adafruit/Adafruit BMP085 Library@1.2.4 + adafruit/Adafruit BME280 Library@2.2.4 + adafruit/Adafruit BMP3XX Library@2.1.5 + adafruit/Adafruit MCP9808 Library@2.0.2 + adafruit/Adafruit INA260 Library@1.5.2 + adafruit/Adafruit INA219@1.2.3 + adafruit/Adafruit MAX1704X@1.0.3 + adafruit/Adafruit SHTC3 Library@1.0.1 + adafruit/Adafruit LPS2X@2.0.6 + adafruit/Adafruit SHT31 Library@2.2.2 + adafruit/Adafruit PM25 AQI Sensor@1.1.1 + adafruit/Adafruit MPU6050@2.2.6 + adafruit/Adafruit LIS3DH@1.3.0 + adafruit/Adafruit AHTX0@2.0.5 + adafruit/Adafruit LSM6DS@4.7.3 + adafruit/Adafruit VEML7700 Library@2.1.6 + adafruit/Adafruit SHT4x Library@1.0.5 + adafruit/Adafruit TSL2591 Library@1.4.5 + sparkfun/SparkFun Qwiic Scale NAU7802 Arduino Library@1.0.6 + sparkfun/SparkFun 9DoF IMU Breakout - ICM 20948 - Arduino Library@1.2.13 + ClosedCube OPT3001@1.1.2 + emotibit/EmotiBit MLX90632@1.0.8 + adafruit/Adafruit MLX90614 Library@2.1.5 + https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502 + boschsensortec/BME68x Sensor Library@1.1.40407 + https://github.com/KodinLanewave/INA3221@1.0.1 + mprograms/QMC5883LCompass@1.2.3 + dfrobot/DFRobot_RTU@1.0.3 + https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d + robtillaart/INA226@0.6.0 - https://github.com/boschsensortec/Bosch-BSEC2-Library#v1.7.2502 - boschsensortec/BME68x Sensor Library@^1.1.40407 - https://github.com/KodinLanewave/INA3221@^1.0.1 - lewisxhe/SensorLib@0.2.0 - mprograms/QMC5883LCompass@^1.2.0 - - https://github.com/meshtastic/DFRobot_LarkWeatherStation#4de3a9cadef0f6a5220a8a906cf9775b02b0040d - https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1 + ; Health Sensor Libraries + sparkfun/SparkFun MAX3010x Pulse and Proximity Sensor Library@1.1.2 \ No newline at end of file diff --git a/protobufs b/protobufs index e22381a3c..c55f120a9 160000 --- a/protobufs +++ b/protobufs @@ -1 +1 @@ -Subproject commit e22381a3c6bbdd428f127ed8c0aa0a37789c3907 +Subproject commit c55f120a9c1ce90c85e4826907a0b9bcb2d5f5a2 diff --git a/release/latest/.gitignore b/release/latest/.gitignore deleted file mode 100644 index fff416667..000000000 --- a/release/latest/.gitignore +++ /dev/null @@ -1 +0,0 @@ -curfirmwareversion.xml diff --git a/src/AmbientLightingThread.h b/src/AmbientLightingThread.h index 07764e66e..600583348 100644 --- a/src/AmbientLightingThread.h +++ b/src/AmbientLightingThread.h @@ -21,7 +21,7 @@ namespace concurrency class AmbientLightingThread : public concurrency::OSThread { public: - explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLightingThread") + explicit AmbientLightingThread(ScanI2C::DeviceType type) : OSThread("AmbientLighting") { notifyDeepSleepObserver.observe(¬ifyDeepSleep); // Let us know when shutdown() is issued. @@ -42,18 +42,18 @@ class AmbientLightingThread : public concurrency::OSThread #ifdef HAS_NCP5623 _type = type; if (_type == ScanI2C::DeviceType::NONE) { - LOG_DEBUG("AmbientLightingThread disabling due to no RGB leds found on I2C bus"); + LOG_DEBUG("AmbientLighting Disable due to no RGB leds found on I2C bus"); disable(); return; } #endif #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE) if (!moduleConfig.ambient_lighting.led_state) { - LOG_DEBUG("AmbientLightingThread disabling due to moduleConfig.ambient_lighting.led_state OFF"); + LOG_DEBUG("AmbientLighting Disable due to moduleConfig.ambient_lighting.led_state OFF"); disable(); return; } - LOG_DEBUG("AmbientLightingThread initializing"); + LOG_DEBUG("AmbientLighting init"); #ifdef HAS_NCP5623 if (_type == ScanI2C::NCP5623) { rgb.begin(); @@ -106,27 +106,27 @@ class AmbientLightingThread : public concurrency::OSThread rgb.setRed(0); rgb.setGreen(0); rgb.setBlue(0); - LOG_INFO("Turn Off NCP5623 Ambient lighting."); + LOG_INFO("OFF: NCP5623 Ambient lighting"); #endif #ifdef HAS_NEOPIXEL pixels.clear(); pixels.show(); - LOG_INFO("Turn Off NeoPixel Ambient lighting."); + LOG_INFO("OFF: NeoPixel Ambient lighting"); #endif #ifdef RGBLED_CA analogWrite(RGBLED_RED, 255 - 0); analogWrite(RGBLED_GREEN, 255 - 0); analogWrite(RGBLED_BLUE, 255 - 0); - LOG_INFO("Turn Off Ambient lighting RGB Common Anode."); + LOG_INFO("OFF: Ambient light RGB Common Anode"); #elif defined(RGBLED_RED) analogWrite(RGBLED_RED, 0); analogWrite(RGBLED_GREEN, 0); analogWrite(RGBLED_BLUE, 0); - LOG_INFO("Turn Off Ambient lighting RGB Common Cathode."); + LOG_INFO("OFF: Ambient light RGB Common Cathode"); #endif #ifdef UNPHONE unphone.rgb(0, 0, 0); - LOG_INFO("Turn Off unPhone Ambient lighting."); + LOG_INFO("OFF: unPhone Ambient lighting"); #endif return 0; } @@ -138,9 +138,8 @@ class AmbientLightingThread : public concurrency::OSThread rgb.setRed(moduleConfig.ambient_lighting.red); rgb.setGreen(moduleConfig.ambient_lighting.green); rgb.setBlue(moduleConfig.ambient_lighting.blue); - LOG_DEBUG("Initializing NCP5623 Ambient lighting w/ current=%d, red=%d, green=%d, blue=%d", - moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, - moduleConfig.ambient_lighting.blue); + LOG_DEBUG("Init NCP5623 Ambient light w/ current=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current, + moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); #endif #ifdef HAS_NEOPIXEL pixels.fill(pixels.Color(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, @@ -158,7 +157,7 @@ class AmbientLightingThread : public concurrency::OSThread #endif #endif pixels.show(); - LOG_DEBUG("Initializing NeoPixel Ambient lighting w/ brightness(current)=%d, red=%d, green=%d, blue=%d", + LOG_DEBUG("Init NeoPixel Ambient light w/ brightness(current)=%d, red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.current, moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); #endif @@ -166,21 +165,21 @@ class AmbientLightingThread : public concurrency::OSThread analogWrite(RGBLED_RED, 255 - moduleConfig.ambient_lighting.red); analogWrite(RGBLED_GREEN, 255 - moduleConfig.ambient_lighting.green); analogWrite(RGBLED_BLUE, 255 - moduleConfig.ambient_lighting.blue); - LOG_DEBUG("Initializing Ambient lighting RGB Common Anode w/ red=%d, green=%d, blue=%d", - moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); + LOG_DEBUG("Init Ambient light RGB Common Anode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red, + moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); #elif defined(RGBLED_RED) analogWrite(RGBLED_RED, moduleConfig.ambient_lighting.red); analogWrite(RGBLED_GREEN, moduleConfig.ambient_lighting.green); analogWrite(RGBLED_BLUE, moduleConfig.ambient_lighting.blue); - LOG_DEBUG("Initializing Ambient lighting RGB Common Cathode w/ red=%d, green=%d, blue=%d", - moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); + LOG_DEBUG("Init Ambient light RGB Common Cathode w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red, + moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); #endif #ifdef UNPHONE unphone.rgb(moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); - LOG_DEBUG("Initializing unPhone Ambient lighting w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red, + LOG_DEBUG("Init unPhone Ambient light w/ red=%d, green=%d, blue=%d", moduleConfig.ambient_lighting.red, moduleConfig.ambient_lighting.green, moduleConfig.ambient_lighting.blue); #endif } }; -} // namespace concurrency \ No newline at end of file +} // namespace concurrency diff --git a/src/AudioThread.h b/src/AudioThread.h index c9f253440..6d560ec55 100644 --- a/src/AudioThread.h +++ b/src/AudioThread.h @@ -16,7 +16,7 @@ class AudioThread : public concurrency::OSThread { public: - AudioThread() : OSThread("AudioThread") { initOutput(); } + AudioThread() : OSThread("Audio") { initOutput(); } void beginRttl(const void *data, uint32_t len) { @@ -64,7 +64,7 @@ class AudioThread : public concurrency::OSThread void initOutput() { audioOut = new AudioOutputI2S(1, AudioOutputI2S::EXTERNAL_I2S); - audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT); + audioOut->SetPinout(DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_MCLK); audioOut->SetGain(0.2); }; diff --git a/src/ButtonThread.cpp b/src/ButtonThread.cpp index ca4d40e15..3f64b3b3e 100644 --- a/src/ButtonThread.cpp +++ b/src/ButtonThread.cpp @@ -1,4 +1,5 @@ #include "ButtonThread.h" + #include "configuration.h" #if !MESHTASTIC_EXCLUDE_GPS #include "GPS.h" @@ -26,20 +27,25 @@ using namespace concurrency; ButtonThread *buttonThread; // Declared extern in header volatile ButtonThread::ButtonEventType ButtonThread::btnEvent = ButtonThread::BUTTON_EVENT_NONE; -#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) +#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN) OneButton ButtonThread::userButton; // Get reference to static member #endif ButtonThread::ButtonThread() : OSThread("Button") { -#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) +#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN) #if defined(ARCH_PORTDUINO) if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) { this->userButton = OneButton(settingsMap[user], true, true); - LOG_DEBUG("Using GPIO%02d for button", settingsMap[user]); + LOG_DEBUG("Use GPIO%02d for button", settingsMap[user]); } #elif defined(BUTTON_PIN) - int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin +#if !defined(USERPREFS_BUTTON_PIN) + int pin = config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN; // Resolved button pin +#endif +#ifdef USERPREFS_BUTTON_PIN + int pin = config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN; // Resolved button pin +#endif #if defined(HELTEC_CAPSULE_SENSOR_V3) this->userButton = OneButton(pin, false, false); #elif defined(BUTTON_ACTIVE_LOW) @@ -47,7 +53,7 @@ ButtonThread::ButtonThread() : OSThread("Button") #else this->userButton = OneButton(pin, true, true); #endif - LOG_DEBUG("Using GPIO%02d for button", pin); + LOG_DEBUG("Use GPIO%02d for button", pin); #endif #ifdef INPUT_PULLUP_SENSE @@ -59,7 +65,7 @@ ButtonThread::ButtonThread() : OSThread("Button") #endif #endif -#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) +#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN) userButton.attachClick(userButtonPressed); userButton.setClickMs(BUTTON_CLICK_MS); userButton.setPressMs(BUTTON_LONGPRESS_MS); @@ -102,7 +108,7 @@ int32_t ButtonThread::runOnce() // If the button is pressed we suppress CPU sleep until release canSleep = true; // Assume we should not keep the board awake -#if defined(BUTTON_PIN) +#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN) userButton.tick(); canSleep &= userButton.isIdle(); #elif defined(ARCH_PORTDUINO) @@ -130,7 +136,12 @@ int32_t ButtonThread::runOnce() return 50; } #ifdef BUTTON_PIN +#if !defined(USERPREFS_BUTTON_PIN) if (((config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN) != +#endif +#if defined(USERPREFS_BUTTON_PIN) + if (((config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN) != +#endif moduleConfig.canned_message.inputbroker_pin_press) || !(moduleConfig.canned_message.updown1_enabled || moduleConfig.canned_message.rotary1_enabled) || !moduleConfig.canned_message.enabled) { @@ -244,7 +255,12 @@ void ButtonThread::attachButtonInterrupts() #elif defined(BUTTON_PIN) // Interrupt for user button, during normal use. Improves responsiveness. attachInterrupt( +#if !defined(USERPREFS_BUTTON_PIN) config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN, +#endif +#if defined(USERPREFS_BUTTON_PIN) + config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN, +#endif []() { ButtonThread::userButton.tick(); runASAP = true; @@ -273,8 +289,13 @@ void ButtonThread::detachButtonInterrupts() if (settingsMap.count(user) != 0 && settingsMap[user] != RADIOLIB_NC) detachInterrupt(settingsMap[user]); #elif defined(BUTTON_PIN) +#if !defined(USERPREFS_BUTTON_PIN) detachInterrupt(config.device.button_gpio ? config.device.button_gpio : BUTTON_PIN); #endif +#if defined(USERPREFS_BUTTON_PIN) + detachInterrupt(config.device.button_gpio ? config.device.button_gpio : USERPREFS_BUTTON_PIN); +#endif +#endif #ifdef BUTTON_PIN_ALT detachInterrupt(BUTTON_PIN_ALT); @@ -315,7 +336,7 @@ void ButtonThread::userButtonMultiPressed(void *callerThread) // Non-static method, runs during callback. Grabs info while still valid void ButtonThread::storeClickCount() { -#ifdef BUTTON_PIN +#if defined(BUTTON_PIN) || defined(USERPREFS_BUTTON_PIN) multipressClickCount = userButton.getNumberClicks(); #endif } diff --git a/src/ButtonThread.h b/src/ButtonThread.h index 9cd7b3dac..a01a1718f 100644 --- a/src/ButtonThread.h +++ b/src/ButtonThread.h @@ -38,7 +38,7 @@ class ButtonThread : public concurrency::OSThread void storeClickCount(); private: -#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) +#if defined(BUTTON_PIN) || defined(ARCH_PORTDUINO) || defined(USERPREFS_BUTTON_PIN) static OneButton userButton; // Static - accessed from an interrupt #endif #ifdef BUTTON_PIN_ALT diff --git a/src/DebugConfiguration.h b/src/DebugConfiguration.h index 55453ea1e..7987e7fa1 100644 --- a/src/DebugConfiguration.h +++ b/src/DebugConfiguration.h @@ -45,7 +45,7 @@ #define LOG_CRIT(...) SEGGER_RTT_printf(0, __VA_ARGS__) #define LOG_TRACE(...) SEGGER_RTT_printf(0, __VA_ARGS__) #else -#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) && !defined(PIO_UNIT_TESTING) +#if defined(DEBUG_PORT) && !defined(DEBUG_MUTE) #define LOG_DEBUG(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_DEBUG, __VA_ARGS__) #define LOG_INFO(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_INFO, __VA_ARGS__) #define LOG_WARN(...) DEBUG_PORT.log(MESHTASTIC_LOG_LEVEL_WARN, __VA_ARGS__) diff --git a/src/FSCommon.cpp b/src/FSCommon.cpp index cea1130aa..df46c1941 100644 --- a/src/FSCommon.cpp +++ b/src/FSCommon.cpp @@ -55,6 +55,15 @@ extern "C" void lfs_assert(const char *reason) { LOG_ERROR("LFS assert: %s", reason); lfs_assert_failed = true; + +#ifndef ARCH_PORTDUINO +#ifdef FSCom + // CORRUPTED FILESYSTEM. This causes bootloop so + // might as well try formatting now. + LOG_ERROR("Trying FSCom.format()"); + FSCom.format(); +#endif +#endif } /** @@ -231,7 +240,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) #ifdef ARCH_ESP32 listDir(file.path(), levels - 1, del); if (del) { - LOG_DEBUG("Removing %s", file.path()); + LOG_DEBUG("Remove %s", file.path()); strncpy(buffer, file.path(), sizeof(buffer)); file.close(); FSCom.rmdir(buffer); @@ -241,7 +250,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)) listDir(file.name(), levels - 1, del); if (del) { - LOG_DEBUG("Removing %s", file.name()); + LOG_DEBUG("Remove %s", file.name()); strncpy(buffer, file.name(), sizeof(buffer)); file.close(); FSCom.rmdir(buffer); @@ -257,7 +266,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) } else { #ifdef ARCH_ESP32 if (del) { - LOG_DEBUG("Deleting %s", file.path()); + LOG_DEBUG("Delete %s", file.path()); strncpy(buffer, file.path(), sizeof(buffer)); file.close(); FSCom.remove(buffer); @@ -267,7 +276,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) } #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)) if (del) { - LOG_DEBUG("Deleting %s", file.name()); + LOG_DEBUG("Delete %s", file.name()); strncpy(buffer, file.name(), sizeof(buffer)); file.close(); FSCom.remove(buffer); @@ -284,7 +293,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) } #ifdef ARCH_ESP32 if (del) { - LOG_DEBUG("Removing %s", root.path()); + LOG_DEBUG("Remove %s", root.path()); strncpy(buffer, root.path(), sizeof(buffer)); root.close(); FSCom.rmdir(buffer); @@ -293,7 +302,7 @@ void listDir(const char *dirname, uint8_t levels, bool del) } #elif (defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)) if (del) { - LOG_DEBUG("Removing %s", root.name()); + LOG_DEBUG("Remove %s", root.name()); strncpy(buffer, root.name(), sizeof(buffer)); root.close(); FSCom.rmdir(buffer); @@ -329,7 +338,7 @@ void fsInit() { #ifdef FSCom if (!FSBegin()) { - LOG_ERROR("Filesystem mount Failed."); + LOG_ERROR("Filesystem mount failed"); // assert(0); This auto-formats the partition, so no need to fail here. } #if defined(ARCH_ESP32) diff --git a/src/GPSStatus.h b/src/GPSStatus.h index 12f302baa..4b7997935 100644 --- a/src/GPSStatus.h +++ b/src/GPSStatus.h @@ -50,9 +50,6 @@ class GPSStatus : public Status int32_t getLatitude() const { if (config.position.fixed_position) { -#ifdef GPS_EXTRAVERBOSE - LOG_WARN("Using fixed latitude"); -#endif meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum()); return node->position.latitude_i; } else { @@ -63,9 +60,6 @@ class GPSStatus : public Status int32_t getLongitude() const { if (config.position.fixed_position) { -#ifdef GPS_EXTRAVERBOSE - LOG_WARN("Using fixed longitude"); -#endif meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum()); return node->position.longitude_i; } else { @@ -76,9 +70,6 @@ class GPSStatus : public Status int32_t getAltitude() const { if (config.position.fixed_position) { -#ifdef GPS_EXTRAVERBOSE - LOG_WARN("Using fixed altitude"); -#endif meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum()); return node->position.altitude; } else { @@ -94,7 +85,7 @@ class GPSStatus : public Status bool matches(const GPSStatus *newStatus) const { -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("GPSStatus.match() new pos@%x to old pos@%x", newStatus->p.timestamp, p.timestamp); #endif return (newStatus->hasLock != hasLock || newStatus->isConnected != isConnected || diff --git a/src/GpioLogic.cpp b/src/GpioLogic.cpp index ba01d482d..ecdf514e4 100644 --- a/src/GpioLogic.cpp +++ b/src/GpioLogic.cpp @@ -12,7 +12,6 @@ void GpioVirtPin::set(bool value) void GpioHwPin::set(bool value) { - // if (num == 3) LOG_DEBUG("Setting pin %d to %d", num, value); pinMode(num, OUTPUT); digitalWrite(num, value); } @@ -66,7 +65,7 @@ GpioBinaryTransformer::GpioBinaryTransformer(GpioVirtPin *inPin1, GpioVirtPin *i assert(!inPin2->dependentPin); // We only allow one dependent pin inPin2->dependentPin = this; - // Don't update at construction time, because various GpioPins might be global constructor based not yet initied because + // Don't update at construction time, because various GpioPins might be global constructor based not yet initiated because // order of operations for global constructors is not defined. // update(); } @@ -88,7 +87,6 @@ void GpioBinaryTransformer::update() newValue = (GpioVirtPin::PinState)(p1 && p2); break; case Or: - // LOG_DEBUG("Doing GPIO OR"); newValue = (GpioVirtPin::PinState)(p1 || p2); break; case Xor: @@ -101,4 +99,4 @@ void GpioBinaryTransformer::update() set(newValue); } -GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {} \ No newline at end of file +GpioSplitter::GpioSplitter(GpioPin *outPin1, GpioPin *outPin2) : outPin1(outPin1), outPin2(outPin2) {} diff --git a/src/Power.cpp b/src/Power.cpp index f9b04dfd5..ae0908ec6 100644 --- a/src/Power.cpp +++ b/src/Power.cpp @@ -72,8 +72,9 @@ static const uint8_t ext_chrg_detect_value = EXT_CHRG_DETECT_VALUE; #endif #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) -INA260Sensor ina260Sensor; INA219Sensor ina219Sensor; +INA226Sensor ina226Sensor; +INA260Sensor ina260Sensor; INA3221Sensor ina3221Sensor; #endif @@ -154,9 +155,16 @@ static void adcEnable() #ifdef ADC_CTRL // enable adc voltage divider when we need to read #ifdef ADC_USE_PULLUP pinMode(ADC_CTRL, INPUT_PULLUP); +#else +#ifdef HELTEC_V3 + pinMode(ADC_CTRL, INPUT); + uint8_t adc_ctl_enable_value = !(digitalRead(ADC_CTRL)); + pinMode(ADC_CTRL, OUTPUT); + digitalWrite(ADC_CTRL, adc_ctl_enable_value); #else pinMode(ADC_CTRL, OUTPUT); digitalWrite(ADC_CTRL, ADC_CTRL_ENABLED); +#endif #endif delay(10); #endif @@ -167,10 +175,14 @@ static void adcDisable() #ifdef ADC_CTRL // disable adc voltage divider when we need to read #ifdef ADC_USE_PULLUP pinMode(ADC_CTRL, INPUT_PULLDOWN); +#else +#ifdef HELTEC_V3 + pinMode(ADC_CTRL, ANALOG); #else digitalWrite(ADC_CTRL, !ADC_CTRL_ENABLED); #endif #endif +#endif } #endif @@ -240,7 +252,6 @@ class AnalogBatteryLevel : public HasBatteryLevel #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !defined(HAS_PMU) && \ !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR if (hasINA()) { - LOG_DEBUG("Using INA on I2C addr 0x%x for device battery voltage", config.power.device_battery_ina_address); return getINAVoltage(); } #endif @@ -260,7 +271,7 @@ class AnalogBatteryLevel : public HasBatteryLevel config.power.adc_multiplier_override > 0 ? config.power.adc_multiplier_override : ADC_MULTIPLIER; // Do not call analogRead() often. const uint32_t min_read_interval = 5000; - if (!Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) { + if (!initial_read_done || !Throttle::isWithinTimespanMs(last_read_time_ms, min_read_interval)) { last_read_time_ms = millis(); uint32_t raw = 0; @@ -360,7 +371,12 @@ class AnalogBatteryLevel : public HasBatteryLevel /** * return true if there is a battery installed in this unit */ + // if we have a integrated device with a battery, we can assume that the battery is always connected +#ifdef BATTERY_IMMUTABLE + virtual bool isBatteryConnect() override { return true; } +#else virtual bool isBatteryConnect() override { return getBatteryPercent() != -1; } +#endif /// If we see a battery voltage higher than physics allows - assume charger is pumping /// in power @@ -398,7 +414,20 @@ class AnalogBatteryLevel : public HasBatteryLevel #ifdef EXT_CHRG_DETECT return digitalRead(EXT_CHRG_DETECT) == ext_chrg_detect_value; #else +#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && \ + !defined(DISABLE_INA_CHARGING_DETECTION) + if (hasINA()) { + // get current flow from INA sensor - negative value means power flowing into the battery + // default assuming BATTERY+ <--> INA_VIN+ <--> SHUNT RESISTOR <--> INA_VIN- <--> LOAD + LOG_DEBUG("Using INA on I2C addr 0x%x for charging detection", config.power.device_battery_ina_address); +#if defined(INA_CHARGING_DETECTION_INVERT) + return getINACurrent() > 0; +#else + return getINACurrent() < 0; +#endif + } return isBatteryConnect() && isVbusIn(); +#endif #endif } @@ -435,6 +464,9 @@ class AnalogBatteryLevel : public HasBatteryLevel { if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) { return ina219Sensor.getBusVoltageMv(); + } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first == + config.power.device_battery_ina_address) { + return ina226Sensor.getBusVoltageMv(); } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first == config.power.device_battery_ina_address) { return ina260Sensor.getBusVoltageMv(); @@ -445,6 +477,20 @@ class AnalogBatteryLevel : public HasBatteryLevel return 0; } + int16_t getINACurrent() + { + if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA219].first == config.power.device_battery_ina_address) { + return ina219Sensor.getCurrentMa(); + } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first == + config.power.device_battery_ina_address) { + return ina226Sensor.getCurrentMa(); + } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA3221].first == + config.power.device_battery_ina_address) { + return ina3221Sensor.getCurrentMa(); + } + return 0; + } + bool hasINA() { if (!config.power.device_battery_ina_address) { @@ -454,6 +500,10 @@ class AnalogBatteryLevel : public HasBatteryLevel if (!ina219Sensor.isInitialized()) return ina219Sensor.runOnce() > 0; return ina219Sensor.isRunning(); + } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA226].first == + config.power.device_battery_ina_address) { + if (!ina226Sensor.isInitialized()) + return ina226Sensor.runOnce() > 0; } else if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_INA260].first == config.power.device_battery_ina_address) { if (!ina260Sensor.isInitialized()) @@ -495,7 +545,7 @@ bool Power::analogInit() #endif #ifdef BATTERY_PIN - LOG_DEBUG("Using analog input %d for battery level", BATTERY_PIN); + LOG_DEBUG("Use analog input %d for battery level", BATTERY_PIN); // disable any internal pullups pinMode(BATTERY_PIN, INPUT); @@ -526,18 +576,18 @@ bool Power::analogInit() esp_adc_cal_value_t val_type = esp_adc_cal_characterize(unit, atten, width, DEFAULT_VREF, adc_characs); // show ADC characterization base if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP) { - LOG_INFO("ADCmod: ADC characterization based on Two Point values stored in eFuse"); + LOG_INFO("ADC config based on Two Point values stored in eFuse"); } else if (val_type == ESP_ADC_CAL_VAL_EFUSE_VREF) { - LOG_INFO("ADCmod: ADC characterization based on reference voltage stored in eFuse"); + LOG_INFO("ADC config based on reference voltage stored in eFuse"); } #ifdef CONFIG_IDF_TARGET_ESP32S3 // ESP32S3 else if (val_type == ESP_ADC_CAL_VAL_EFUSE_TP_FIT) { - LOG_INFO("ADCmod: ADC Characterization based on Two Point values and fitting curve coefficients stored in eFuse"); + LOG_INFO("ADC config based on Two Point values and fitting curve coefficients stored in eFuse"); } #endif else { - LOG_INFO("ADCmod: ADC characterization based on default reference voltage"); + LOG_INFO("ADC config based on default reference voltage"); } #endif // ARCH_ESP32 @@ -598,7 +648,7 @@ void Power::shutdown() #ifdef PIN_LED3 ledOff(PIN_LED3); #endif - doDeepSleep(DELAY_FOREVER, false); + doDeepSleep(DELAY_FOREVER, false, false); #endif } @@ -624,7 +674,7 @@ void Power::readPowerStatus() batteryChargePercent = batteryLevel->getBatteryPercent(); } else { // If the AXP192 returns a percentage less than 0, the feature is either not supported or there is an error - // In that case, we compute an estimate of the charge percent based on open circuite voltage table defined + // In that case, we compute an estimate of the charge percent based on open circuit voltage table defined // in power.h batteryChargePercent = clamp((int)(((batteryVoltageMv - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS)) * 1e2) / ((OCV[0] * NUM_CELLS) - (OCV[NUM_OCV_POINTS - 1] * NUM_CELLS))), @@ -706,9 +756,9 @@ void Power::readPowerStatus() if (low_voltage_counter > 10) { #ifdef ARCH_NRF52 // We can't trigger deep sleep on NRF52, it's freezing the board - LOG_DEBUG("Low voltage detected, but not triggering deep sleep"); + LOG_DEBUG("Low voltage detected, but not trigger deep sleep"); #else - LOG_INFO("Low voltage detected, triggering deep sleep"); + LOG_INFO("Low voltage detected, trigger deep sleep"); powerFSM.trigger(EVENT_LOW_BATTERY); #endif } @@ -800,22 +850,22 @@ bool Power::axpChipInit() if (!PMU) { PMU = new XPowersAXP2101(*w); if (!PMU->init()) { - LOG_WARN("Failed to find AXP2101 power management"); + LOG_WARN("No AXP2101 power management"); delete PMU; PMU = NULL; } else { - LOG_INFO("AXP2101 PMU init succeeded, using AXP2101 PMU"); + LOG_INFO("AXP2101 PMU init succeeded"); } } if (!PMU) { PMU = new XPowersAXP192(*w); if (!PMU->init()) { - LOG_WARN("Failed to find AXP192 power management"); + LOG_WARN("No AXP192 power management"); delete PMU; PMU = NULL; } else { - LOG_INFO("AXP192 PMU init succeeded, using AXP192 PMU"); + LOG_INFO("AXP192 PMU init succeeded"); } } @@ -1139,4 +1189,4 @@ bool Power::lipoInit() { return false; } -#endif \ No newline at end of file +#endif diff --git a/src/PowerFSM.cpp b/src/PowerFSM.cpp index 35ef2624a..4c4d203c2 100644 --- a/src/PowerFSM.cpp +++ b/src/PowerFSM.cpp @@ -19,6 +19,10 @@ #include "sleep.h" #include "target_specific.h" +#if HAS_WIFI && !defined(ARCH_PORTDUINO) +#include "mesh/wifi/WiFiAPClient.h" +#endif + #ifndef SLEEP_TIME #define SLEEP_TIME 30 #endif @@ -53,16 +57,21 @@ static bool isPowered() static void sdsEnter() { - LOG_DEBUG("Enter state: SDS"); + LOG_DEBUG("State: SDS"); // FIXME - make sure GPS and LORA radio are off first - because we want close to zero current draw - doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false); + doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, false); } +static void lowBattSDSEnter() +{ + LOG_DEBUG("State: Lower batt SDS"); + doDeepSleep(Default::getConfiguredOrDefaultMs(config.power.sds_secs), false, true); +} extern Power *power; static void shutdownEnter() { - LOG_DEBUG("Enter state: SHUTDOWN"); + LOG_DEBUG("State: SHUTDOWN"); power->shutdown(); } @@ -105,7 +114,7 @@ static void lsIdle() wakeCause2 = doLightSleep(100); // leave led on for 1ms secsSlept += sleepTime; - // LOG_INFO("sleeping, flash led!"); + // LOG_INFO("Sleep, flash led!"); break; case ESP_SLEEP_WAKEUP_UART: @@ -137,7 +146,7 @@ static void lsIdle() } else { // Time to stop sleeping! ledBlink.set(false); - LOG_INFO("Reached ls_secs, servicing loop()"); + LOG_INFO("Reached ls_secs, service loop()"); powerFSM.trigger(EVENT_WAKE_TIMER); } #endif @@ -150,7 +159,7 @@ static void lsExit() static void nbEnter() { - LOG_DEBUG("Enter state: NB"); + LOG_DEBUG("State: NB"); screen->setOn(false); #ifdef ARCH_ESP32 // Only ESP32 should turn off bluetooth @@ -168,7 +177,7 @@ static void darkEnter() static void serialEnter() { - LOG_DEBUG("Enter state: SERIAL"); + LOG_DEBUG("State: SERIAL"); setBluetoothEnable(false); screen->setOn(true); screen->print("Serial connected\n"); @@ -183,9 +192,9 @@ static void serialExit() static void powerEnter() { - // LOG_DEBUG("Enter state: POWER"); + // LOG_DEBUG("State: POWER"); if (!isPowered()) { - // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things + // If we got here, we are in the wrong state - we should be in powered, let that state handle things LOG_INFO("Loss of power in Powered"); powerFSM.trigger(EVENT_POWER_DISCONNECTED); } else { @@ -222,7 +231,7 @@ static void powerExit() static void onEnter() { - LOG_DEBUG("Enter state: ON"); + LOG_DEBUG("State: ON"); screen->setOn(true); setBluetoothEnable(true); } @@ -230,7 +239,7 @@ static void onEnter() static void onIdle() { if (isPowered()) { - // If we got here, we are in the wrong state - we should be in powered, let that state ahndle things + // If we got here, we are in the wrong state - we should be in powered, let that state handle things powerFSM.trigger(EVENT_POWER_CONNECTED); } } @@ -242,11 +251,12 @@ static void screenPress() static void bootEnter() { - LOG_DEBUG("Enter state: BOOT"); + LOG_DEBUG("State: BOOT"); } State stateSHUTDOWN(shutdownEnter, NULL, NULL, "SHUTDOWN"); State stateSDS(sdsEnter, NULL, NULL, "SDS"); +State stateLowBattSDS(lowBattSDSEnter, NULL, NULL, "SDS"); State stateLS(lsEnter, lsIdle, lsExit, "LS"); State stateNB(nbEnter, NULL, NULL, "NB"); State stateDARK(darkEnter, NULL, NULL, "DARK"); @@ -291,12 +301,12 @@ void PowerFSM_setup() "Press"); // Allow button to work while in serial API // Handle critically low power battery by forcing deep sleep - powerFSM.add_transition(&stateBOOT, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); - powerFSM.add_transition(&stateLS, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); - powerFSM.add_transition(&stateNB, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); - powerFSM.add_transition(&stateDARK, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); - powerFSM.add_transition(&stateON, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); - powerFSM.add_transition(&stateSERIAL, &stateSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateBOOT, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateLS, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateNB, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateDARK, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateON, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); + powerFSM.add_transition(&stateSERIAL, &stateLowBattSDS, EVENT_LOW_BATTERY, NULL, "LowBat"); // Handle being told to power off powerFSM.add_transition(&stateBOOT, &stateSHUTDOWN, EVENT_SHUTDOWN, NULL, "Shutdown"); @@ -371,9 +381,9 @@ void PowerFSM_setup() // We never enter light-sleep or NB states on NRF52 (because the CPU uses so little power normally) #ifdef ARCH_ESP32 // See: https://github.com/meshtastic/firmware/issues/1071 - // Don't add power saving transitions if we are a power saving tracker or sensor. Sleep will be initiatiated through the - // modules - if ((isRouter || config.power.is_power_saving) && !isTrackerOrSensor) { + // Don't add power saving transitions if we are a power saving tracker or sensor or have Wifi enabled. Sleep will be initiated + // through the modules + if ((isRouter || config.power.is_power_saving) && !isWifiAvailable() && !isTrackerOrSensor) { powerFSM.add_timed_transition(&stateNB, &stateLS, Default::getConfiguredOrDefaultMs(config.power.min_wake_secs, default_min_wake_secs), NULL, "Min wake timeout"); diff --git a/src/RedirectablePrint.h b/src/RedirectablePrint.h index 4ae2b68f9..45b62b7af 100644 --- a/src/RedirectablePrint.h +++ b/src/RedirectablePrint.h @@ -51,9 +51,9 @@ class RedirectablePrint : public Print protected: /// Subclasses can override if they need to change how we format over the serial port virtual void log_to_serial(const char *logLevel, const char *format, va_list arg); + meshtastic_LogRecord_Level getLogLevel(const char *logLevel); private: void log_to_syslog(const char *logLevel, const char *format, va_list arg); void log_to_ble(const char *logLevel, const char *format, va_list arg); - meshtastic_LogRecord_Level getLogLevel(const char *logLevel); }; \ No newline at end of file diff --git a/src/SerialConsole.cpp b/src/SerialConsole.cpp index fe6ccdefe..68c41980d 100644 --- a/src/SerialConsole.cpp +++ b/src/SerialConsole.cpp @@ -99,25 +99,7 @@ bool SerialConsole::handleToRadio(const uint8_t *buf, size_t len) void SerialConsole::log_to_serial(const char *logLevel, const char *format, va_list arg) { if (usingProtobufs && config.security.debug_log_api_enabled) { - meshtastic_LogRecord_Level ll = meshtastic_LogRecord_Level_UNSET; // default to unset - switch (logLevel[0]) { - case 'D': - ll = meshtastic_LogRecord_Level_DEBUG; - break; - case 'I': - ll = meshtastic_LogRecord_Level_INFO; - break; - case 'W': - ll = meshtastic_LogRecord_Level_WARNING; - break; - case 'E': - ll = meshtastic_LogRecord_Level_ERROR; - break; - case 'C': - ll = meshtastic_LogRecord_Level_CRITICAL; - break; - } - + meshtastic_LogRecord_Level ll = RedirectablePrint::getLogLevel(logLevel); auto thread = concurrency::OSThread::currentThread; emitLogRecord(ll, thread ? thread->ThreadName.c_str() : "", format, arg); } else diff --git a/src/airtime.cpp b/src/airtime.cpp index 7478debb9..a7736d667 100644 --- a/src/airtime.cpp +++ b/src/airtime.cpp @@ -13,17 +13,17 @@ void AirTime::logAirtime(reportTypes reportType, uint32_t airtime_ms) { if (reportType == TX_LOG) { - LOG_DEBUG("Packet transmitted : %ums", airtime_ms); + LOG_DEBUG("Packet TX: %ums", airtime_ms); this->airtimes.periodTX[0] = this->airtimes.periodTX[0] + airtime_ms; air_period_tx[0] = air_period_tx[0] + airtime_ms; this->utilizationTX[this->getPeriodUtilHour()] = this->utilizationTX[this->getPeriodUtilHour()] + airtime_ms; } else if (reportType == RX_LOG) { - LOG_DEBUG("Packet received : %ums", airtime_ms); + LOG_DEBUG("Packet RX: %ums", airtime_ms); this->airtimes.periodRX[0] = this->airtimes.periodRX[0] + airtime_ms; air_period_rx[0] = air_period_rx[0] + airtime_ms; } else if (reportType == RX_ALL_LOG) { - LOG_DEBUG("Packet received (noise?) : %ums", airtime_ms); + LOG_DEBUG("Packet RX (noise?) : %ums", airtime_ms); this->airtimes.periodRX_ALL[0] = this->airtimes.periodRX_ALL[0] + airtime_ms; } @@ -50,7 +50,7 @@ void AirTime::airtimeRotatePeriod() { if (this->airtimes.lastPeriodIndex != this->currentPeriodIndex()) { - LOG_DEBUG("Rotating airtimes to a new period = %u", this->currentPeriodIndex()); + LOG_DEBUG("Rotate airtimes to a new period = %u", this->currentPeriodIndex()); for (int i = PERIODS_TO_LOG - 2; i >= 0; --i) { this->airtimes.periodTX[i + 1] = this->airtimes.periodTX[i]; @@ -105,7 +105,6 @@ float AirTime::channelUtilizationPercent() uint32_t sum = 0; for (uint32_t i = 0; i < CHANNEL_UTILIZATION_PERIODS; i++) { sum += this->channelUtilization[i]; - // LOG_DEBUG("ChanUtilArray %u %u", i, this->channelUtilization[i]); } return (float(sum) / float(CHANNEL_UTILIZATION_PERIODS * 10 * 1000)) * 100; @@ -127,7 +126,7 @@ bool AirTime::isTxAllowedChannelUtil(bool polite) if (channelUtilizationPercent() < percentage) { return true; } else { - LOG_WARN("Channel utilization is >%d percent. Skipping this opportunity to send.", percentage); + LOG_WARN("Ch. util >%d%%. Skip send", percentage); return false; } } @@ -138,8 +137,7 @@ bool AirTime::isTxAllowedAirUtil() if (utilizationTXPercent() < myRegion->dutyCycle * polite_duty_cycle_percent / 100) { return true; } else { - LOG_WARN("Tx air utilization is >%f percent. Skipping this opportunity to send.", - myRegion->dutyCycle * polite_duty_cycle_percent / 100); + LOG_WARN("TX air util. >%f%%. Skip send", myRegion->dutyCycle * polite_duty_cycle_percent / 100); return false; } } @@ -208,14 +206,5 @@ int32_t AirTime::runOnce() this->utilizationTX[utilPeriodTX] = 0; } } - /* - LOG_DEBUG("utilPeriodTX %d TX Airtime %3.2f%", utilPeriodTX, airTime->utilizationTXPercent()); - for (uint32_t i = 0; i < MINUTES_IN_HOUR; i++) { - LOG_DEBUG( - "%d,", this->utilizationTX[i] - ); - } - LOG_DEBUG(""); - */ return (1000 * 1); -} \ No newline at end of file +} diff --git a/src/buzz/buzz.cpp b/src/buzz/buzz.cpp index e42a9c203..8db9602bc 100644 --- a/src/buzz/buzz.cpp +++ b/src/buzz/buzz.cpp @@ -55,6 +55,18 @@ void playBeep() playTones(melody, sizeof(melody) / sizeof(ToneDuration)); } +void playGPSEnableBeep() +{ + ToneDuration melody[] = {{NOTE_C3, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_CS4, DURATION_1_4}}; + playTones(melody, sizeof(melody) / sizeof(ToneDuration)); +} + +void playGPSDisableBeep() +{ + ToneDuration melody[] = {{NOTE_CS4, DURATION_1_8}, {NOTE_FS3, DURATION_1_4}, {NOTE_C3, DURATION_1_4}}; + playTones(melody, sizeof(melody) / sizeof(ToneDuration)); +} + void playStartMelody() { ToneDuration melody[] = {{NOTE_FS3, DURATION_1_8}, {NOTE_AS3, DURATION_1_8}, {NOTE_CS4, DURATION_1_4}}; diff --git a/src/buzz/buzz.h b/src/buzz/buzz.h index 3883bd057..c52c3020c 100644 --- a/src/buzz/buzz.h +++ b/src/buzz/buzz.h @@ -3,3 +3,5 @@ void playBeep(); void playStartMelody(); void playShutdownMelody(); +void playGPSEnableBeep(); +void playGPSDisableBeep(); \ No newline at end of file diff --git a/src/concurrency/NotifiedWorkerThread.cpp b/src/concurrency/NotifiedWorkerThread.cpp index d84ff0903..0e4e31d9b 100644 --- a/src/concurrency/NotifiedWorkerThread.cpp +++ b/src/concurrency/NotifiedWorkerThread.cpp @@ -32,12 +32,12 @@ IRAM_ATTR bool NotifiedWorkerThread::notifyCommon(uint32_t v, bool overwrite) notification = v; if (debugNotification) { - LOG_DEBUG("setting notification %d", v); + LOG_DEBUG("Set notification %d", v); } return true; } else { if (debugNotification) { - LOG_DEBUG("dropping notification %d", v); + LOG_DEBUG("Drop notification %d", v); } return false; } @@ -67,7 +67,7 @@ bool NotifiedWorkerThread::notifyLater(uint32_t delay, uint32_t v, bool overwrit if (didIt) { // If we didn't already have something queued, override the delay to be larger setIntervalFromNow(delay); // a new version of setInterval relative to the current time if (debugNotification) { - LOG_DEBUG("delaying notification %u", delay); + LOG_DEBUG("Delay notification %u", delay); } } diff --git a/src/configuration.h b/src/configuration.h index 10a4e0a99..994f1e72e 100644 --- a/src/configuration.h +++ b/src/configuration.h @@ -114,6 +114,7 @@ along with this program. If not, see . #define CARDKB_ADDR 0x5F #define TDECK_KB_ADDR 0x55 #define BBQ10_KB_ADDR 0x1F +#define MPR121_KB_ADDR 0x5A // ----------------------------------------------------------------------------- // SENSOR @@ -135,6 +136,7 @@ along with this program. If not, see . #define LPS22HB_ADDR_ALT 0x5D #define SHT31_4x_ADDR 0x44 #define PMSA0031_ADDR 0x12 +#define QMA6100P_ADDR 0x12 #define AHT10_ADDR 0x38 #define RCWL9620_ADDR 0x57 #define VEML7700_ADDR 0x10 @@ -146,13 +148,15 @@ along with this program. If not, see . #define NAU7802_ADDR 0x2A #define MAX30102_ADDR 0x57 #define MLX90614_ADDR_DEF 0x5A +#define CGRADSENS_ADDR 0x66 // ----------------------------------------------------------------------------- // ACCELEROMETER // ----------------------------------------------------------------------------- #define MPU6050_ADDR 0x68 -#define STK8BXX_ADR 0x18 -#define LIS3DH_ADR 0x18 +#define STK8BXX_ADDR 0x18 +#define LIS3DH_ADDR 0x18 +#define LIS3DH_ADDR_ALT 0x19 #define BMA423_ADDR 0x19 #define LSM6DS3_ADDR 0x6A #define BMX160_ADDR 0x69 @@ -167,7 +171,6 @@ along with this program. If not, see . // ----------------------------------------------------------------------------- // Security // ----------------------------------------------------------------------------- -#define ATECC608B_ADDR 0x35 // ----------------------------------------------------------------------------- // IO Expander @@ -205,6 +208,9 @@ along with this program. If not, see . #ifndef GPS_BAUDRATE #define GPS_BAUDRATE 9600 +#define GPS_BAUDRATE_FIXED 0 +#else +#define GPS_BAUDRATE_FIXED 1 #endif /* Step #2: follow with defines common to the architecture; @@ -244,6 +250,9 @@ along with this program. If not, see . #ifndef HAS_SCREEN #define HAS_SCREEN 0 #endif +#ifndef HAS_TFT +#define HAS_TFT 0 +#endif #ifndef HAS_WIRE #define HAS_WIRE 0 #endif @@ -306,6 +315,7 @@ along with this program. If not, see . #define MESHTASTIC_EXCLUDE_AUDIO 1 #define MESHTASTIC_EXCLUDE_DETECTIONSENSOR 1 #define MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR 1 +#define MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY 1 #define MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION 1 #define MESHTASTIC_EXCLUDE_PAXCOUNTER 1 #define MESHTASTIC_EXCLUDE_POWER_TELEMETRY 1 diff --git a/src/detect/ScanI2C.cpp b/src/detect/ScanI2C.cpp index a9d70edaa..4caa0f730 100644 --- a/src/detect/ScanI2C.cpp +++ b/src/detect/ScanI2C.cpp @@ -31,14 +31,14 @@ ScanI2C::FoundDevice ScanI2C::firstRTC() const ScanI2C::FoundDevice ScanI2C::firstKeyboard() const { - ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004}; - return firstOfOrNONE(4, types); + ScanI2C::DeviceType types[] = {CARDKB, TDECKKB, BBQ10KB, RAK14004, MPR121KB}; + return firstOfOrNONE(5, types); } ScanI2C::FoundDevice ScanI2C::firstAccelerometer() const { - ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948}; - return firstOfOrNONE(7, types); + ScanI2C::DeviceType types[] = {MPU6050, LIS3DH, BMA423, LSM6DS3, BMX160, STK8BAXX, ICM20948, QMA6100P}; + return firstOfOrNONE(8, types); } ScanI2C::FoundDevice ScanI2C::find(ScanI2C::DeviceType) const diff --git a/src/detect/ScanI2C.h b/src/detect/ScanI2C.h index 07db3fd57..2561a8e17 100644 --- a/src/detect/ScanI2C.h +++ b/src/detect/ScanI2C.h @@ -12,7 +12,6 @@ class ScanI2C SCREEN_SH1106, SCREEN_UNKNOWN, // has the same address as the two above but does not respond to the same commands SCREEN_ST7567, - ATECC608B, RTC_RV3028, RTC_PCF8563, CARDKB, @@ -39,6 +38,7 @@ class ScanI2C QMC5883L, HMC5883L, PMSA0031, + QMA6100P, MPU6050, LIS3DH, BMA423, @@ -61,7 +61,11 @@ class ScanI2C STK8BAXX, ICM20948, MAX30102, - TPS65233 + TPS65233, + MPR121KB, + CGRADSENS, + INA226, + NXP_SE050, } DeviceType; // typedef uint8_t DeviceAddress; @@ -125,4 +129,4 @@ class ScanI2C private: bool shouldSuppressScreen = false; -}; \ No newline at end of file +}; diff --git a/src/detect/ScanI2CTwoWire.cpp b/src/detect/ScanI2CTwoWire.cpp index 0401a5ecc..a786f874d 100644 --- a/src/detect/ScanI2CTwoWire.cpp +++ b/src/detect/ScanI2CTwoWire.cpp @@ -7,7 +7,7 @@ #include "linux/LinuxHardwareI2C.h" #endif #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) -#include "main.h" // atecc +#include "meshUtils.h" // vformat #endif // AXP192 and AXP2101 have the same device address, we just need to identify it in Power.cpp @@ -71,10 +71,10 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const r &= 0x0f; if (r == 0x08 || r == 0x00) { - LOG_INFO("sh1106 display found"); + logFoundDevice("SH1106", (uint8_t)addr.address); o_probe = SCREEN_SH1106; // SH1106 } else if (r == 0x03 || r == 0x04 || r == 0x06 || r == 0x07) { - LOG_INFO("ssd1306 display found"); + logFoundDevice("SSD1306", (uint8_t)addr.address); o_probe = SCREEN_SSD1306; // SSD1306 } c++; @@ -83,40 +83,6 @@ ScanI2C::DeviceType ScanI2CTwoWire::probeOLED(ScanI2C::DeviceAddress addr) const return o_probe; } -void ScanI2CTwoWire::printATECCInfo() const -{ -#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) - atecc.readConfigZone(false); - - std::string atecc_numbers = "ATECC608B Serial Number: "; - for (int i = 0; i < 9; i++) { - atecc_numbers += vformat("%02x", atecc.serialNumber[i]); - } - - atecc_numbers += ", Rev Number: "; - for (int i = 0; i < 4; i++) { - atecc_numbers += vformat("%02x", atecc.revisionNumber[i]); - } - LOG_DEBUG(atecc_numbers.c_str()); - - LOG_DEBUG("ATECC608B Config %s, Data %s, Slot 0 %s", atecc.configLockStatus ? "Locked" : "Unlocked", - atecc.dataOTPLockStatus ? "Locked" : "Unlocked", atecc.slot0LockStatus ? "Locked" : "Unlocked"); - - std::string atecc_publickey = ""; - if (atecc.configLockStatus && atecc.dataOTPLockStatus && atecc.slot0LockStatus) { - if (atecc.generatePublicKey() == false) { - atecc_publickey += "ATECC608B Error generating public key"; - } else { - atecc_publickey += "ATECC608B Public Key: "; - for (int i = 0; i < 64; i++) { - atecc_publickey += vformat("%02x", atecc.publicKey64Bytes[i]); - } - } - LOG_DEBUG(atecc_publickey.c_str()); - } -#endif -} - uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation ®isterLocation, ScanI2CTwoWire::ResponseWidth responseWidth) const { @@ -128,7 +94,6 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation i2cBus->endTransmission(); delay(20); i2cBus->requestFrom(registerLocation.i2cAddress.address, responseWidth); - LOG_DEBUG("Wire.available() = %d", i2cBus->available()); if (i2cBus->available() == 2) { // Read MSB, then LSB value = (uint16_t)i2cBus->read() << 8; @@ -141,7 +106,7 @@ uint16_t ScanI2CTwoWire::getRegisterValue(const ScanI2CTwoWire::RegisterLocation #define SCAN_SIMPLE_CASE(ADDR, T, ...) \ case ADDR: \ - LOG_INFO(__VA_ARGS__); \ + logFoundDevice(__VA_ARGS__); \ type = T; \ break; @@ -149,7 +114,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) { concurrency::LockGuard guard((concurrency::Lock *)&lock); - LOG_DEBUG("Scanning for I2C devices on port %d", port); + LOG_DEBUG("Scan for I2C devices on port %d", port); uint8_t err; @@ -172,52 +137,47 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) } #endif - for (addr.address = 1; addr.address < 127; addr.address++) { + // We only need to scan 112 addresses, the rest is reserved for special purposes + // 0x00 General Call + // 0x01 CBUS addresses + // 0x02 Reserved for different bus formats + // 0x03 Reserved for future purposes + // 0x04-0x07 High Speed Master Code + // 0x78-0x7B 10-bit slave addressing + // 0x7C-0x7F Reserved for future purposes + + for (addr.address = 8; addr.address < 120; addr.address++) { if (asize != 0) { - if (!in_array(address, asize, addr.address)) + if (!in_array(address, asize, (uint8_t)addr.address)) continue; - LOG_DEBUG("Scanning address 0x%x", addr.address); + LOG_DEBUG("Scan address 0x%x", (uint8_t)addr.address); } i2cBus->beginTransmission(addr.address); #ifdef ARCH_PORTDUINO - if (i2cBus->read() != -1) - err = 0; - else + err = 2; + if ((addr.address >= 0x30 && addr.address <= 0x37) || (addr.address >= 0x50 && addr.address <= 0x5F)) { + if (i2cBus->read() != -1) + err = 0; + } else { + err = i2cBus->writeQuick((uint8_t)0); + } + if (err != 0) err = 2; #else err = i2cBus->endTransmission(); #endif type = NONE; if (err == 0) { - LOG_DEBUG("I2C device found at address 0x%x", addr.address); - switch (addr.address) { case SSD1306_ADDRESS: type = probeOLED(addr); break; -#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) - case ATECC608B_ADDR: -#ifdef RP2040_SLOW_CLOCK - if (atecc.begin(addr.address, Wire, Serial2) == true) -#else - if (atecc.begin(addr.address) == true) -#endif - - { - LOG_INFO("ATECC608B initialized"); - } else { - LOG_WARN("ATECC608B initialization failed"); - } - printATECCInfo(); - break; -#endif - #ifdef RV3028_RTC case RV3028_RTC: // foundDevices[addr] = RTC_RV3028; type = RTC_RV3028; - LOG_INFO("RV3028 RTC found"); + logFoundDevice("RV3028", (uint8_t)addr.address); rtc.initI2C(*i2cBus); rtc.writeToRegister(0x35, 0x07); // no Clkout rtc.writeToRegister(0x37, 0xB4); @@ -225,7 +185,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) #endif #ifdef PCF8563_RTC - SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563 RTC found") + SCAN_SIMPLE_CASE(PCF8563_RTC, RTC_PCF8563, "PCF8563", (uint8_t)addr.address) #endif case CARDKB_ADDR: @@ -233,49 +193,50 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x04), 1); if (registerValue == 0x02) { // KEYPAD_VERSION - LOG_INFO("RAK14004 found"); + logFoundDevice("RAK14004", (uint8_t)addr.address); type = RAK14004; } else { - LOG_INFO("m5 cardKB found"); + logFoundDevice("M5 cardKB", (uint8_t)addr.address); type = CARDKB; } break; - SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard found"); - SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10 keyboard found"); - SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "st7567 display found"); + SCAN_SIMPLE_CASE(TDECK_KB_ADDR, TDECKKB, "T-Deck keyboard", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(BBQ10_KB_ADDR, BBQ10KB, "BB Q10", (uint8_t)addr.address); + + SCAN_SIMPLE_CASE(ST7567_ADDRESS, SCREEN_ST7567, "ST7567", (uint8_t)addr.address); #ifdef HAS_NCP5623 - SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623 RGB LED found"); + SCAN_SIMPLE_CASE(NCP5623_ADDR, NCP5623, "NCP5623", (uint8_t)addr.address); #endif #ifdef HAS_PMU - SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "axp192/axp2101 PMU found") + SCAN_SIMPLE_CASE(XPOWERS_AXP192_AXP2101_ADDRESS, PMU_AXP192_AXP2101, "AXP192/AXP2101", (uint8_t)addr.address) #endif case BME_ADDR: case BME_ADDR_ALTERNATE: registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xD0), 1); // GET_ID switch (registerValue) { case 0x61: - LOG_INFO("BME-680 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("BME680", (uint8_t)addr.address); type = BME_680; break; case 0x60: - LOG_INFO("BME-280 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("BME280", (uint8_t)addr.address); type = BME_280; break; case 0x55: - LOG_INFO("BMP-085 or BMP-180 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("BMP085/BMP180", (uint8_t)addr.address); type = BMP_085; break; default: registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); // GET_ID switch (registerValue) { case 0x50: // BMP-388 should be 0x50 - LOG_INFO("BMP-388 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("BMP-388", (uint8_t)addr.address); type = BMP_3XX; break; case 0x58: // BMP-280 should be 0x58 default: - LOG_INFO("BMP-280 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("BMP-280", (uint8_t)addr.address); type = BMP_280; break; } @@ -284,7 +245,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) break; #ifndef HAS_NCP5623 case AHT10_ADDR: - LOG_INFO("AHT10 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("AHT10", (uint8_t)addr.address); type = AHT10; break; #endif @@ -294,41 +255,65 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2); LOG_DEBUG("Register MFG_UID: 0x%x", registerValue); if (registerValue == 0x5449) { - LOG_INFO("INA260 sensor found at address 0x%x", (uint8_t)addr.address); - type = INA260; + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 2); + LOG_DEBUG("Register DIE_UID: 0x%x", registerValue); + + if (registerValue == 0x2260) { + logFoundDevice("INA226", (uint8_t)addr.address); + type = INA226; + } else { + logFoundDevice("INA260", (uint8_t)addr.address); + type = INA260; + } } else { // Assume INA219 if INA260 ID is not found - LOG_INFO("INA219 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("INA219", (uint8_t)addr.address); type = INA219; } break; case INA3221_ADDR: registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFE), 2); - LOG_DEBUG("Register MFG_UID: 0x%x", registerValue); + LOG_DEBUG("Register MFG_UID FE: 0x%x", registerValue); if (registerValue == 0x5449) { - LOG_INFO("INA3221 sensor found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("INA3221", (uint8_t)addr.address); type = INA3221; } else { - LOG_INFO("DFRobot Lark weather station found at address 0x%x", (uint8_t)addr.address); - type = DFROBOT_LARK; + /* check the first 2 bytes of the 6 byte response register + LARK FW 1.0 should return: + RESPONSE_STATUS STATUS_SUCCESS (0x53) + RESPONSE_CMD CMD_GET_VERSION (0x05) + RESPONSE_LEN_L 0x02 + RESPONSE_LEN_H 0x00 + RESPONSE_PAYLOAD 0x01 + RESPONSE_PAYLOAD+1 0x00 + */ + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x05), 2); + LOG_DEBUG("Register MFG_UID 05: 0x%x", registerValue); + if (registerValue == 0x5305) { + logFoundDevice("DFRobot Lark", (uint8_t)addr.address); + type = DFROBOT_LARK; + } + // else: probably a RAK12500/UBLOX GPS on I2C } break; case MCP9808_ADDR: // We need to check for STK8BAXX first, since register 0x07 is new data flag for the z-axis and can produce some // weird result. and register 0x00 doesn't seems to be colliding with MCP9808 and LIS3DH chips. { +#ifdef HAS_STK8XXX // Check register 0x00 for 0x8700 response to ID STK8BA53 chip. registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 2); if (registerValue == 0x8700) { type = STK8BAXX; - LOG_INFO("STK8BAXX accelerometer found"); + logFoundDevice("STK8BAXX", (uint8_t)addr.address); break; } +#endif // Check register 0x07 for 0x0400 response to ID MCP9808 chip. registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x07), 2); if (registerValue == 0x0400) { type = MCP9808; - LOG_INFO("MCP9808 sensor found"); + logFoundDevice("MCP9808", (uint8_t)addr.address); break; } @@ -336,7 +321,7 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2); if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333 type = LIS3DH; - LOG_INFO("LIS3DH accelerometer found"); + logFoundDevice("LIS3DH", (uint8_t)addr.address); } break; } @@ -344,95 +329,150 @@ void ScanI2CTwoWire::scanPort(I2CPort port, uint8_t *address, uint8_t asize) registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x89), 2); if (registerValue == 0x11a2 || registerValue == 0x11da || registerValue == 0xe9c) { type = SHT4X; - LOG_INFO("SHT4X sensor found"); + logFoundDevice("SHT4X", (uint8_t)addr.address); } else if (getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x7E), 2) == 0x5449) { type = OPT3001; - LOG_INFO("OPT3001 light sensor found"); + logFoundDevice("OPT3001", (uint8_t)addr.address); } else { type = SHT31; - LOG_INFO("SHT31 sensor found"); + logFoundDevice("SHT31", (uint8_t)addr.address); } break; - SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3 sensor found") + SCAN_SIMPLE_CASE(SHTC3_ADDR, SHTC3, "SHTC3", (uint8_t)addr.address) case RCWL9620_ADDR: // get MAX30102 PARTID registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0xFF), 1); if (registerValue == 0x15) { type = MAX30102; - LOG_INFO("MAX30102 Health sensor found"); + logFoundDevice("MAX30102", (uint8_t)addr.address); break; } else { type = RCWL9620; - LOG_INFO("RCWL9620 sensor found"); + logFoundDevice("RCWL9620", (uint8_t)addr.address); } break; case LPS22HB_ADDR_ALT: - SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB sensor found") - - SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310 Highrate 3-Axis magnetic sensor found") + SCAN_SIMPLE_CASE(LPS22HB_ADDR, LPS22HB, "LPS22HB", (uint8_t)addr.address) + SCAN_SIMPLE_CASE(QMC6310_ADDR, QMC6310, "QMC6310", (uint8_t)addr.address) case QMI8658_ADDR: registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0A), 1); // get ID if (registerValue == 0xC0) { type = BQ24295; - LOG_INFO("BQ24295 PMU found"); + logFoundDevice("BQ24295", (uint8_t)addr.address); break; } registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 1); // get ID if (registerValue == 0x6A) { type = LSM6DS3; - LOG_INFO("LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address); + logFoundDevice("LSM6DS3", (uint8_t)addr.address); } else { type = QMI8658; - LOG_INFO("QMI8658 Highrate 6-Axis inertial measurement sensor found"); + logFoundDevice("QMI8658", (uint8_t)addr.address); } break; - SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L Highrate 3-Axis magnetic sensor found") - SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L 3-Axis digital compass found") - SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031 air quality sensor found") - SCAN_SIMPLE_CASE(BMA423_ADDR, BMA423, "BMA423 accelerometer found"); - SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3 accelerometer found at address 0x%x", (uint8_t)addr.address); - SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535 I2C expander found"); - SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555 I2C expander found"); - SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700 light sensor found"); - SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591 light sensor found"); - SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001 light sensor found"); - SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632 IR temp sensor found"); - SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802 based scale found"); - SCAN_SIMPLE_CASE(FT6336U_ADDR, FT6336U, "FT6336U touchscreen found"); - SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048 lipo fuel gauge found"); -#ifdef HAS_TPS65233 - SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233 BIAS-T found"); + SCAN_SIMPLE_CASE(QMC5883L_ADDR, QMC5883L, "QMC5883L", (uint8_t)addr.address) + SCAN_SIMPLE_CASE(HMC5883L_ADDR, HMC5883L, "HMC5883L", (uint8_t)addr.address) +#ifdef HAS_QMA6100P + SCAN_SIMPLE_CASE(QMA6100P_ADDR, QMA6100P, "QMA6100P", (uint8_t)addr.address) +#else + SCAN_SIMPLE_CASE(PMSA0031_ADDR, PMSA0031, "PMSA0031", (uint8_t)addr.address) #endif - SCAN_SIMPLE_CASE(MLX90614_ADDR_DEF, MLX90614, "MLX90614 IR temp sensor found"); + case BMA423_ADDR: // this can also be LIS3DH_ADDR_ALT + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0F), 2); + if (registerValue == 0x3300 || registerValue == 0x3333) { // RAK4631 WisBlock has LIS3DH register at 0x3333 + type = LIS3DH; + logFoundDevice("LIS3DH", (uint8_t)addr.address); + } else { + type = BMA423; + logFoundDevice("BMA423", (uint8_t)addr.address); + } + break; + + SCAN_SIMPLE_CASE(LSM6DS3_ADDR, LSM6DS3, "LSM6DS3", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(TCA9535_ADDR, TCA9535, "TCA9535", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(TCA9555_ADDR, TCA9555, "TCA9555", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(VEML7700_ADDR, VEML7700, "VEML7700", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(TSL25911_ADDR, TSL2591, "TSL2591", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(OPT3001_ADDR, OPT3001, "OPT3001", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(MLX90632_ADDR, MLX90632, "MLX90632", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(NAU7802_ADDR, NAU7802, "NAU7802", (uint8_t)addr.address); + SCAN_SIMPLE_CASE(MAX1704X_ADDR, MAX17048, "MAX17048", (uint8_t)addr.address); +#ifdef HAS_TPS65233 + SCAN_SIMPLE_CASE(TPS65233_ADDR, TPS65233, "TPS65233", (uint8_t)addr.address); +#endif + + case MLX90614_ADDR_DEF: + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x0e), 1); + if (registerValue == 0x5a) { + type = MLX90614; + logFoundDevice("MLX90614", (uint8_t)addr.address); + } else { + type = MPR121KB; + logFoundDevice("MPR121KB", (uint8_t)addr.address); + } + break; case ICM20948_ADDR: // same as BMX160_ADDR case ICM20948_ADDR_ALT: // same as MPU6050_ADDR registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); if (registerValue == 0xEA) { type = ICM20948; - LOG_INFO("ICM20948 9-dof motion processor found"); + logFoundDevice("ICM20948", (uint8_t)addr.address); break; } else if (addr.address == BMX160_ADDR) { type = BMX160; - LOG_INFO("BMX160 accelerometer found"); + logFoundDevice("BMX160", (uint8_t)addr.address); break; } else { type = MPU6050; - LOG_INFO("MPU6050 accelerometer found"); + logFoundDevice("MPU6050", (uint8_t)addr.address); break; } break; + case CGRADSENS_ADDR: + // Register 0x00 of the RadSens sensor contains is product identifier 0x7D + // Undocumented, but some devices return a product identifier of 0x7A + registerValue = getRegisterValue(ScanI2CTwoWire::RegisterLocation(addr, 0x00), 1); + if (registerValue == 0x7D || registerValue == 0x7A) { + type = CGRADSENS; + logFoundDevice("ClimateGuard RadSens", (uint8_t)addr.address); + break; + } else { + LOG_DEBUG("Unexpected Device ID for RadSense: addr=0x%x id=0x%x", CGRADSENS_ADDR, registerValue); + } + break; + + case 0x48: { + i2cBus->beginTransmission(addr.address); + uint8_t getInfo[] = {0x5A, 0xC0, 0x00, 0xFF, 0xFC}; + uint8_t expectedInfo[] = {0xa5, 0xE0, 0x00, 0x3F, 0x19}; + uint8_t info[5]; + size_t len = 0; + i2cBus->write(getInfo, 5); + i2cBus->endTransmission(); + len = i2cBus->readBytes(info, 5); + if (len == 5 && memcmp(expectedInfo, info, len) == 0) { + LOG_INFO("NXP SE050 crypto chip found"); + type = NXP_SE050; + + } else { + LOG_INFO("FT6336U touchscreen found"); + type = FT6336U; + } + break; + } + default: - LOG_INFO("Device found at address 0x%x was not able to be enumerated", addr.address); + LOG_INFO("Device found at address 0x%x was not able to be enumerated", (uint8_t)addr.address); } } else if (err == 4) { - LOG_ERROR("Unknown error at address 0x%x", addr.address); + LOG_ERROR("Unknown error at address 0x%x", (uint8_t)addr.address); } // Check if a type was found for the enumerated device - save, if so @@ -465,4 +505,9 @@ size_t ScanI2CTwoWire::countDevices() const { return foundDevices.size(); } -#endif \ No newline at end of file + +void ScanI2CTwoWire::logFoundDevice(const char *device, uint8_t address) +{ + LOG_INFO("%s found at address 0x%x", device, address); +} +#endif diff --git a/src/detect/ScanI2CTwoWire.h b/src/detect/ScanI2CTwoWire.h index c8dd96469..d0af7cde6 100644 --- a/src/detect/ScanI2CTwoWire.h +++ b/src/detect/ScanI2CTwoWire.h @@ -53,10 +53,10 @@ class ScanI2CTwoWire : public ScanI2C concurrency::Lock lock; - void printATECCInfo() const; - uint16_t getRegisterValue(const RegisterLocation &, ResponseWidth) const; DeviceType probeOLED(ScanI2C::DeviceAddress) const; + + static void logFoundDevice(const char *device, uint8_t address); }; #endif \ No newline at end of file diff --git a/src/detect/axpDebug.h b/src/detect/axpDebug.h deleted file mode 100644 index fd75745f2..000000000 --- a/src/detect/axpDebug.h +++ /dev/null @@ -1,19 +0,0 @@ -#if 0 -// Turn off for now -uint32_t axpDebugRead() -{ - axp.debugCharging(); - LOG_DEBUG("vbus current %f", axp.getVbusCurrent()); - LOG_DEBUG("charge current %f", axp.getBattChargeCurrent()); - LOG_DEBUG("bat voltage %f", axp.getBattVoltage()); - LOG_DEBUG("batt pct %d", axp.getBattPercentage()); - LOG_DEBUG("is battery connected %d", axp.isBatteryConnect()); - LOG_DEBUG("is USB connected %d", axp.isVBUSPlug()); - LOG_DEBUG("is charging %d", axp.isChargeing()); - - return 30 * 1000; -} - -Periodic axpDebugOutput(axpDebugRead); -axpDebugOutput.setup(); -#endif \ No newline at end of file diff --git a/src/gps/GPS.cpp b/src/gps/GPS.cpp index 18feb6daa..dcece305a 100644 --- a/src/gps/GPS.cpp +++ b/src/gps/GPS.cpp @@ -7,6 +7,7 @@ #include "PowerMon.h" #include "RTC.h" #include "Throttle.h" +#include "buzz.h" #include "meshUtils.h" #include "main.h" // pmu_found @@ -19,6 +20,7 @@ #ifdef ARCH_PORTDUINO #include "PortduinoGlue.h" #include "meshUtils.h" +#include #include #endif @@ -26,29 +28,43 @@ #define GPS_RESET_MODE HIGH #endif +// Not all platforms have std::size(). +template std::size_t array_count(const T (&)[N]) +{ + return N; +} + #if defined(NRF52840_XXAA) || defined(NRF52833_XXAA) || defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) HardwareSerial *GPS::_serial_gps = &Serial1; #elif defined(ARCH_RP2040) SerialUART *GPS::_serial_gps = &Serial1; #else -HardwareSerial *GPS::_serial_gps = NULL; +HardwareSerial *GPS::_serial_gps = nullptr; #endif GPS *gps = nullptr; -GPSUpdateScheduling scheduling; +static const char *ACK_SUCCESS_MESSAGE = "Get ack success!"; + +static GPSUpdateScheduling scheduling; /// Multiple GPS instances might use the same serial port (in sequence), but we can /// only init that port once. static bool didSerialInit; -struct uBloxGnssModelInfo info; -uint8_t uBloxProtocolVersion; +static struct uBloxGnssModelInfo { + char swVersion[30]; + char hwVersion[10]; + uint8_t extensionNo; + char extension[10][30]; + uint8_t protocol_version; +} ublox_info; + #define GPS_SOL_EXPIRY_MS 5000 // in millis. give 1 second time to combine different sentences. NMEA Frequency isn't higher anyway #define NMEA_MSG_GXGSA "GNGSA" // GSA message (GPGSA, GNGSA etc) // For logging -const char *getGPSPowerStateString(GPSPowerState state) +static const char *getGPSPowerStateString(GPSPowerState state) { switch (state) { case GPS_ACTIVE: @@ -67,7 +83,7 @@ const char *getGPSPowerStateString(GPSPowerState state) } } -void GPS::UBXChecksum(uint8_t *message, size_t length) +static void UBXChecksum(uint8_t *message, size_t length) { uint8_t CK_A = 0, CK_B = 0; @@ -83,7 +99,7 @@ void GPS::UBXChecksum(uint8_t *message, size_t length) } // Calculate the checksum for a CAS packet -void GPS::CASChecksum(uint8_t *message, size_t length) +static void CASChecksum(uint8_t *message, size_t length) { uint32_t cksum = ((uint32_t)message[5] << 24); // Message ID cksum += ((uint32_t)message[4]) << 16; // Class @@ -154,7 +170,7 @@ uint8_t GPS::makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_siz CASChecksum(UBXscratch, (payload_size + 10)); #if defined(GPS_DEBUG) && defined(DEBUG_PORT) - LOG_DEBUG("Constructed CAS packet: "); + LOG_DEBUG("CAS packet: "); DEBUG_PORT.hexDump(MESHTASTIC_LOG_LEVEL_DEBUG, UBXscratch, payload_size + 10); #endif return (payload_size + 10); @@ -235,7 +251,7 @@ GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMilli // Check for an ACK-ACK for the specified class and message id if ((msg_cls == 0x05) && (msg_msg_id == 0x01) && payload_cls == class_id && payload_msg == msg_id) { #ifdef GPS_DEBUG - LOG_INFO("Got ACK for class %02X message %02X in %d millis.", class_id, msg_id, millis() - startTime); + LOG_INFO("Got ACK for class %02X message %02X in %dms", class_id, msg_id, millis() - startTime); #endif return GNSS_RESPONSE_OK; } @@ -243,7 +259,7 @@ GPS_RESPONSE GPS::getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMilli // Check for an ACK-NACK for the specified class and message id if ((msg_cls == 0x05) && (msg_msg_id == 0x00) && payload_cls == class_id && payload_msg == msg_id) { #ifdef GPS_DEBUG - LOG_WARN("Got NACK for class %02X message %02X in %d millis.", class_id, msg_id, millis() - startTime); + LOG_WARN("Got NACK for class %02X message %02X in %dms", class_id, msg_id, millis() - startTime); #endif return GNSS_RESPONSE_NAK; } @@ -266,6 +282,9 @@ GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis) uint32_t startTime = millis(); const char frame_errors[] = "More than 100 frame errors"; int sCounter = 0; +#ifdef GPS_DEBUG + std::string debugmsg = ""; +#endif for (int j = 2; j < 6; j++) { buf[8] += buf[j]; @@ -281,8 +300,7 @@ GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis) while (Throttle::isWithinTimespanMs(startTime, waitMillis)) { if (ack > 9) { #ifdef GPS_DEBUG - LOG_DEBUG(""); - LOG_INFO("Got ACK for class %02X message %02X in %d millis.", class_id, msg_id, millis() - startTime); + LOG_INFO("Got ACK for class %02X message %02X in %dms", class_id, msg_id, millis() - startTime); #endif return GNSS_RESPONSE_OK; // ACK received } @@ -291,20 +309,24 @@ GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis) if (b == frame_errors[sCounter]) { sCounter++; if (sCounter == 26) { +#ifdef GPS_DEBUG + + LOG_DEBUG(debugmsg.c_str()); +#endif return GNSS_RESPONSE_FRAME_ERRORS; } } else { sCounter = 0; } #ifdef GPS_DEBUG - LOG_DEBUG("%02X", b); + debugmsg += vformat("%02X", b); #endif if (b == buf[ack]) { ack++; } else { if (ack == 3 && b == 0x00) { // UBX-ACK-NAK message #ifdef GPS_DEBUG - LOG_DEBUG(""); + LOG_DEBUG(debugmsg.c_str()); #endif LOG_WARN("Got NAK for class %02X message %02X", class_id, msg_id); return GNSS_RESPONSE_NAK; // NAK received @@ -314,7 +336,7 @@ GPS_RESPONSE GPS::getACK(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis) } } #ifdef GPS_DEBUG - LOG_DEBUG(""); + LOG_DEBUG(debugmsg.c_str()); LOG_WARN("No response for class %02X message %02X", class_id, msg_id); #endif return GNSS_RESPONSE_NONE; // No response received within timeout @@ -388,8 +410,7 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t } else { // return payload length #ifdef GPS_DEBUG - LOG_INFO("Got ACK for class %02X message %02X in %d millis.", requestedClass, requestedID, - millis() - startTime); + LOG_INFO("Got ACK for class %02X message %02X in %dms", requestedClass, requestedID, millis() - startTime); #endif return needRead; } @@ -400,36 +421,57 @@ int GPS::getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t } } } - // LOG_WARN("No response for class %02X message %02X", requestedClass, requestedID); return 0; } +#if GPS_BAUDRATE_FIXED +// if GPS_BAUDRATE is specified in variant, only try that. +static const int serialSpeeds[1] = {GPS_BAUDRATE}; +static const int rareSerialSpeeds[1] = {GPS_BAUDRATE}; +#else +static const int serialSpeeds[3] = {9600, 115200, 38400}; +static const int rareSerialSpeeds[3] = {4800, 57600, GPS_BAUDRATE}; +#endif + +/** + * @brief Setup the GPS based on the model detected. + * We detect the GPS by cycling through a set of baud rates, first common then rare. + * For each baud rate, we run GPS::Probe to send commands and match the responses + * to known GPS responses. + * @retval Whether setup reached the end of its potential to configure the GPS. + */ bool GPS::setup() { - if (!didSerialInit) { int msglen = 0; if (tx_gpio && gnssModel == GNSS_MODEL_UNKNOWN) { - - // if GPS_BAUDRATE is specified in variant (i.e. not 9600), skip to the specified rate. - if (speedSelect == 0 && GPS_BAUDRATE != serialSpeeds[speedSelect]) { - speedSelect = std::find(serialSpeeds, std::end(serialSpeeds), GPS_BAUDRATE) - serialSpeeds; + if (probeTries < 2) { + LOG_DEBUG("Probe for GPS at %d", serialSpeeds[speedSelect]); + gnssModel = probe(serialSpeeds[speedSelect]); + if (gnssModel == GNSS_MODEL_UNKNOWN) { + if (++speedSelect == array_count(serialSpeeds)) { + speedSelect = 0; + ++probeTries; + } + } } - - LOG_DEBUG("Probing for GPS at %d", serialSpeeds[speedSelect]); - gnssModel = probe(serialSpeeds[speedSelect]); - if (gnssModel == GNSS_MODEL_UNKNOWN) { - if (++speedSelect == sizeof(serialSpeeds) / sizeof(int)) { - speedSelect = 0; - if (--probeTries == 0) { - LOG_WARN("Giving up on GPS probe and setting to 9600."); + // Rare Serial Speeds + if (probeTries == 2) { + LOG_DEBUG("Probe for GPS at %d", rareSerialSpeeds[speedSelect]); + gnssModel = probe(rareSerialSpeeds[speedSelect]); + if (gnssModel == GNSS_MODEL_UNKNOWN) { + if (++speedSelect == array_count(rareSerialSpeeds)) { + LOG_WARN("Give up on GPS probe and set to %d", GPS_BAUDRATE); return true; } } - return false; } + } + + if (gnssModel != GNSS_MODEL_UNKNOWN) { + setConnected(); } else { - gnssModel = GNSS_MODEL_UNKNOWN; + return false; } if (gnssModel == GNSS_MODEL_MTK) { @@ -467,19 +509,31 @@ bool GPS::setup() // Switch to Fitness Mode, for running and walking purpose with low speed (<5 m/s) _serial_gps->write("$PMTK886,1*29\r\n"); delay(250); + } else if (gnssModel == GNSS_MODEL_MTK_PA1616S) { + // PA1616S is used in some GPS breakout boards from Adafruit + // PA1616S does not have GLONASS capability. PA1616D does, but is not implemented here. + _serial_gps->write("$PMTK353,1,0,0,0,0*2A\r\n"); + // Above command will reset the GPS and takes longer before it will accept new commands + delay(1000); + // Only ask for RMC and GGA (GNRMC and GNGGA) + _serial_gps->write("$PMTK314,0,1,0,1,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0*28\r\n"); + delay(250); + // Enable SBAS / WAAS + _serial_gps->write("$PMTK301,2*2E\r\n"); + delay(250); } else if (gnssModel == GNSS_MODEL_ATGM336H) { // Set the intial configuration of the device - these _should_ work for most AT6558 devices msglen = makeCASPacket(0x06, 0x07, sizeof(_message_CAS_CFG_NAVX_CONF), _message_CAS_CFG_NAVX_CONF); _serial_gps->write(UBXscratch, msglen); if (getACKCas(0x06, 0x07, 250) != GNSS_RESPONSE_OK) { - LOG_WARN("ATGM336H - Could not set Configuration"); + LOG_WARN("ATGM336H: Could not set Config"); } // Set the update frequence to 1Hz msglen = makeCASPacket(0x06, 0x04, sizeof(_message_CAS_CFG_RATE_1HZ), _message_CAS_CFG_RATE_1HZ); _serial_gps->write(UBXscratch, msglen); if (getACKCas(0x06, 0x04, 250) != GNSS_RESPONSE_OK) { - LOG_WARN("ATGM336H - Could not set Update Frequency"); + LOG_WARN("ATGM336H: Could not set Update Frequency"); } // Set the NEMA output messages @@ -491,7 +545,7 @@ bool GPS::setup() msglen = makeCASPacket(0x06, 0x01, sizeof(cas_cfg_msg_packet), cas_cfg_msg_packet); _serial_gps->write(UBXscratch, msglen); if (getACKCas(0x06, 0x01, 250) != GNSS_RESPONSE_OK) { - LOG_WARN("ATGM336H - Could not enable NMEA MSG: %d", fields[i]); + LOG_WARN("ATGM336H: Could not enable NMEA MSG: %d", fields[i]); } } } else if (gnssModel == GNSS_MODEL_UC6580) { @@ -544,20 +598,20 @@ bool GPS::setup() SEND_UBX_PACKET(0x06, 0x01, _message_GGA, "enable NMEA GGA", 500); clearBuffer(); - SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_ECO, "enable powersaving ECO mode for Neo-6", 500); - SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersaving details for GPS", 500); + SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_ECO, "enable powersave ECO mode for Neo-6", 500); + SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500); SEND_UBX_PACKET(0x06, 0x01, _message_AID, "disable UBX-AID", 500); msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE), _message_SAVE); _serial_gps->write(UBXscratch, msglen); if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) { - LOG_WARN("Unable to save GNSS module configuration."); + LOG_WARN("Unable to save GNSS module config"); } else { - LOG_INFO("GNSS module configuration saved!"); + LOG_INFO("GNSS module config saved!"); } } else if (IS_ONE_OF(gnssModel, GNSS_MODEL_UBLOX7, GNSS_MODEL_UBLOX8, GNSS_MODEL_UBLOX9)) { if (gnssModel == GNSS_MODEL_UBLOX7) { - LOG_DEBUG("Setting GPS+SBAS"); + LOG_DEBUG("Set GPS+SBAS"); msglen = makeUBXPacket(0x06, 0x3e, sizeof(_message_GNSS_7), _message_GNSS_7); _serial_gps->write(UBXscratch, msglen); } else { // 8,9 @@ -567,12 +621,12 @@ bool GPS::setup() if (getACK(0x06, 0x3e, 800) == GNSS_RESPONSE_NAK) { // It's not critical if the module doesn't acknowledge this configuration. - LOG_INFO("reconfigure GNSS - defaults maintained. Is this module GPS-only?"); + LOG_DEBUG("reconfigure GNSS - defaults maintained. Is this module GPS-only?"); } else { if (gnssModel == GNSS_MODEL_UBLOX7) { - LOG_INFO("GNSS configured for GPS+SBAS."); + LOG_INFO("GPS+SBAS configured"); } else { // 8,9 - LOG_INFO("GNSS configured for GPS+SBAS+GLONASS+Galileo."); + LOG_INFO("GPS+SBAS+GLONASS+Galileo configured"); } // Documentation say, we need wait atleast 0.5s after reconfiguration of GNSS module, before sending next // commands for the M8 it tends to be more... 1 sec should be enough ;>) @@ -602,10 +656,10 @@ bool GPS::setup() SEND_UBX_PACKET(0x06, 0x01, _message_RMC, "enable NMEA RMC", 500); SEND_UBX_PACKET(0x06, 0x01, _message_GGA, "enable NMEA GGA", 500); - if (uBloxProtocolVersion >= 18) { + if (ublox_info.protocol_version >= 18) { clearBuffer(); - SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersaving for GPS", 500); - SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersaving details for GPS", 500); + SEND_UBX_PACKET(0x06, 0x86, _message_PMS, "enable powersave for GPS", 500); + SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500); // For M8 we want to enable NMEA vserion 4.10 so we can see the additional sats. if (gnssModel == GNSS_MODEL_UBLOX8) { @@ -613,14 +667,14 @@ bool GPS::setup() SEND_UBX_PACKET(0x06, 0x17, _message_NMEA, "enable NMEA 4.10", 500); } } else { - SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_PSM, "enable powersaving mode for GPS", 500); - SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersaving details for GPS", 500); + SEND_UBX_PACKET(0x06, 0x11, _message_CFG_RXM_PSM, "enable powersave mode for GPS", 500); + SEND_UBX_PACKET(0x06, 0x3B, _message_CFG_PM2, "enable powersave details for GPS", 500); } msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE), _message_SAVE); _serial_gps->write(UBXscratch, msglen); if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) { - LOG_WARN("Unable to save GNSS module configuration."); + LOG_WARN("Unable to save GNSS module config"); } else { LOG_INFO("GNSS module configuration saved!"); } @@ -640,13 +694,13 @@ bool GPS::setup() SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_TXT_INFO_BBR, "disable Info messages for M10 GPS BBR", 300); delay(750); // Do M10 configuration for Power Management. - SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_RAM, "enable powersaving for M10 GPS RAM", 300); + SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_RAM, "enable powersave for M10 GPS RAM", 300); delay(750); - SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_BBR, "enable powersaving for M10 GPS BBR", 300); + SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_PM_BBR, "enable powersave for M10 GPS BBR", 300); delay(750); - SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_RAM, "enable Jamming detection M10 GPS RAM", 300); + SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_RAM, "enable jam detection M10 GPS RAM", 300); delay(750); - SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_BBR, "enable Jamming detection M10 GPS BBR", 300); + SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ITFM_BBR, "enable jam detection M10 GPS BBR", 300); delay(750); // Here is where the init commands should go to do further M10 initialization. SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_SBAS_RAM, "disable SBAS M10 GPS RAM", 300); @@ -654,7 +708,8 @@ bool GPS::setup() SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_DISABLE_SBAS_BBR, "disable SBAS M10 GPS BBR", 300); delay(750); // will cause a receiver restart so wait a bit - // Done with initialization, Now enable wanted NMEA messages in BBR layer so they will survive a periodic sleep. + // Done with initialization, Now enable wanted NMEA messages in BBR layer so they will survive a periodic + // sleep. SEND_UBX_PACKET(0x06, 0x8A, _message_VALSET_ENABLE_NMEA_BBR, "enable messages for M10 GPS BBR", 300); delay(750); // Next enable wanted NMEA messages in RAM layer @@ -667,7 +722,7 @@ bool GPS::setup() msglen = makeUBXPacket(0x06, 0x09, sizeof(_message_SAVE_10), _message_SAVE_10); _serial_gps->write(UBXscratch, msglen); if (getACK(0x06, 0x09, 2000) != GNSS_RESPONSE_OK) { - LOG_WARN("Unable to save GNSS module configuration."); + LOG_WARN("Unable to save GNSS module config"); } else { LOG_INFO("GNSS module configuration saved!"); } @@ -685,13 +740,14 @@ GPS::~GPS() // we really should unregister our sleep observer notifyDeepSleepObserver.unobserve(¬ifyDeepSleep); } + // Put the GPS hardware into a specified state void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime) { // Update the stored GPSPowerstate, and create local copies GPSPowerState oldState = powerState; powerState = newState; - LOG_INFO("GPS power state moving from %s to %s", getGPSPowerStateString(oldState), getGPSPowerStateString(newState)); + LOG_INFO("GPS power state move from %s to %s", getGPSPowerStateString(oldState), getGPSPowerStateString(newState)); #ifdef HELTEC_MESH_NODE_T114 if ((oldState == GPS_OFF || oldState == GPS_HARDSLEEP) && (newState != GPS_OFF && newState != GPS_HARDSLEEP)) { @@ -755,13 +811,14 @@ void GPS::setPowerState(GPSPowerState newState, uint32_t sleepTime) void GPS::writePinEN(bool on) { // Abort: if conflict with Canned Messages when using Wisblock(?) - if (HW_VENDOR == meshtastic_HardwareModel_RAK4631 && (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1)) + if ((HW_VENDOR == meshtastic_HardwareModel_RAK4631 || HW_VENDOR == meshtastic_HardwareModel_WISMESH_TAP) && + (rotaryEncoderInterruptImpl1 || upDownInterruptImpl1)) return; // Write and log enablePin->set(on); -#ifdef GPS_EXTRAVERBOSE - LOG_DEBUG("Pin EN %s", val == HIGH ? "HIGH" : "LOW"); +#ifdef GPS_DEBUG + LOG_DEBUG("Pin EN %s", on == HIGH ? "HI" : "LOW"); #endif } @@ -782,8 +839,8 @@ void GPS::writePinStandby(bool standby) // Write and log pinMode(PIN_GPS_STANDBY, OUTPUT); digitalWrite(PIN_GPS_STANDBY, val); -#ifdef GPS_EXTRAVERBOSE - LOG_DEBUG("Pin STANDBY %s", val == HIGH ? "HIGH" : "LOW"); +#ifdef GPS_DEBUG + LOG_DEBUG("Pin STANDBY %s", val == HIGH ? "HI" : "LOW"); #endif #endif } @@ -815,8 +872,7 @@ void GPS::setPowerPMU(bool on) // t-beam v1.1 GNSS power channel on ? PMU->enablePowerOutput(XPOWERS_LDO3) : PMU->disablePowerOutput(XPOWERS_LDO3); } - -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("PMU %s", on ? "on" : "off"); #endif #endif @@ -833,9 +889,6 @@ void GPS::setPowerUBLOX(bool on, uint32_t sleepMs) if (on) { gps->_serial_gps->write(0xFF); clearBuffer(); // This often returns old data, so drop it -#ifdef GPS_EXTRAVERBOSE - LOG_DEBUG("UBLOX: wake"); -#endif } // If putting to sleep @@ -852,23 +905,22 @@ void GPS::setPowerUBLOX(bool on, uint32_t sleepMs) if (gnssModel != GNSS_MODEL_UBLOX10) { // Encode the sleep time in millis into the packet for (int i = 0; i < 4; i++) - gps->_message_PMREQ[0 + i] = sleepMs >> (i * 8); + _message_PMREQ[0 + i] = sleepMs >> (i * 8); // Record the message length - msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), gps->_message_PMREQ); + msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ), _message_PMREQ); } else { // Encode the sleep time in millis into the packet for (int i = 0; i < 4; i++) - gps->_message_PMREQ_10[4 + i] = sleepMs >> (i * 8); + _message_PMREQ_10[4 + i] = sleepMs >> (i * 8); // Record the message length - msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), gps->_message_PMREQ_10); + msglen = gps->makeUBXPacket(0x02, 0x41, sizeof(_message_PMREQ_10), _message_PMREQ_10); } // Send the UBX packet gps->_serial_gps->write(gps->UBXscratch, msglen); - -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("UBLOX: sleep for %dmS", sleepMs); #endif } @@ -916,10 +968,10 @@ void GPS::down() #endif if (softsleepSupported) { - // How long does gps_update_interval need to be, for GPS_HARDSLEEP to become more efficient than GPS_SOFTSLEEP? - // Heuristic equation. A compromise manually fitted to power observations from U-blox NEO-6M and M10050 - // https://www.desmos.com/calculator/6gvjghoumr - // This is not particularly accurate, but probably an impromevement over a single, fixed threshold + // How long does gps_update_interval need to be, for GPS_HARDSLEEP to become more efficient than + // GPS_SOFTSLEEP? Heuristic equation. A compromise manually fitted to power observations from U-blox NEO-6M + // and M10050 https://www.desmos.com/calculator/6gvjghoumr This is not particularly accurate, but probably an + // improvement over a single, fixed threshold uint32_t hardsleepThreshold = (2750 * pow(predictedSearchDuration / 1000, 1.22)); LOG_DEBUG("gps_update_interval >= %us needed to justify hardsleep", hardsleepThreshold / 1000); @@ -940,8 +992,7 @@ void GPS::publishUpdate() shouldPublish = false; // In debug logs, identify position by @timestamp:stage (stage 2 = publish) - LOG_DEBUG("publishing pos@%x:2, hasVal=%d, Sats=%d, GPSlock=%d", p.timestamp, hasValidLocation, p.sats_in_view, - hasLock()); + LOG_DEBUG("Publish pos@%x:2, hasVal=%d, Sats=%d, GPSlock=%d", p.timestamp, hasValidLocation, p.sats_in_view, hasLock()); // Notify any status instances that are observing us const meshtastic::GPSStatus status = meshtastic::GPSStatus(hasValidLocation, isConnected(), isPowerSaving(), p); @@ -956,7 +1007,7 @@ int32_t GPS::runOnce() { if (!GPSInitFinished) { if (!_serial_gps || config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT) { - LOG_INFO("GPS set to not-present. Skipping probe."); + LOG_INFO("GPS set to not-present. Skip probe"); return disable(); } if (!setup()) @@ -975,6 +1026,7 @@ int32_t GPS::runOnce() } } GPSInitFinished = true; + publishUpdate(); } // Repeaters have no need for GPS @@ -991,7 +1043,7 @@ int32_t GPS::runOnce() GNSS_MODEL_UBLOX10)) { // reset the GPS on next bootup if (devicestate.did_gps_reset && scheduling.elapsedSearchMs() > 60 * 1000UL && !hasFlow()) { - LOG_DEBUG("GPS is not communicating, trying factory reset on next bootup."); + LOG_DEBUG("GPS is not found, try factory reset on next boot"); devicestate.did_gps_reset = false; nodeDB->saveToDisk(SEGMENT_DEVICESTATE); return disable(); // Stop the GPS thread as it can do nothing useful until next reboot. @@ -1025,10 +1077,9 @@ int32_t GPS::runOnce() bool tooLong = scheduling.searchedTooLong(); if (tooLong) - LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time."); + LOG_WARN("Couldn't publish a valid location: didn't get a GPS lock in time"); // Once we get a location we no longer desperately want an update - // LOG_DEBUG("gotLoc %d, tooLong %d, gotTime %d", gotLoc, tooLong, gotTime); if ((gotLoc && gotTime) || tooLong) { if (tooLong) { @@ -1071,17 +1122,19 @@ int GPS::prepareDeepSleep(void *unused) return 0; } -const char *PROBE_MESSAGE = "Trying %s (%s)..."; -const char *DETECTED_MESSAGE = "%s detected, using %s Module"; +static const char *PROBE_MESSAGE = "Trying %s (%s)..."; +static const char *DETECTED_MESSAGE = "%s detected, using %s Module"; #define PROBE_SIMPLE(CHIP, TOWRITE, RESPONSE, DRIVER, TIMEOUT, ...) \ - LOG_DEBUG(PROBE_MESSAGE, TOWRITE, CHIP); \ - clearBuffer(); \ - _serial_gps->write(TOWRITE "\r\n"); \ - if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) { \ - LOG_INFO(DETECTED_MESSAGE, CHIP, #DRIVER); \ - return DRIVER; \ - } + do { \ + LOG_DEBUG(PROBE_MESSAGE, TOWRITE, CHIP); \ + clearBuffer(); \ + _serial_gps->write(TOWRITE "\r\n"); \ + if (getACK(RESPONSE, TIMEOUT) == GNSS_RESPONSE_OK) { \ + LOG_INFO(DETECTED_MESSAGE, CHIP, #DRIVER); \ + return DRIVER; \ + } \ + } while (0) GnssModel_t GPS::probe(int serialSpeed) { @@ -1094,12 +1147,12 @@ GnssModel_t GPS::probe(int serialSpeed) _serial_gps->begin(serialSpeed); #else if (_serial_gps->baudRate() != serialSpeed) { - LOG_DEBUG("Setting Baud to %i", serialSpeed); + LOG_DEBUG("Set Baud to %i", serialSpeed); _serial_gps->updateBaudRate(serialSpeed); } #endif - memset(&info, 0, sizeof(struct uBloxGnssModelInfo)); + memset(&ublox_info, 0, sizeof(ublox_info)); uint8_t buffer[768] = {0}; delay(100); @@ -1135,6 +1188,7 @@ GnssModel_t GPS::probe(int serialSpeed) delay(20); PROBE_SIMPLE("L76B", "$PMTK605*31", "Quectel-L76B", GNSS_MODEL_MTK_L76B, 500); + PROBE_SIMPLE("PA1616S", "$PMTK605*31", "1616S", GNSS_MODEL_MTK_PA1616S, 500); uint8_t cfg_rate[] = {0xB5, 0x62, 0x06, 0x08, 0x00, 0x00, 0x00, 0x00}; UBXChecksum(cfg_rate, sizeof(cfg_rate)); @@ -1143,7 +1197,7 @@ GnssModel_t GPS::probe(int serialSpeed) // Check that the returned response class and message ID are correct GPS_RESPONSE response = getACK(0x06, 0x08, 750); if (response == GNSS_RESPONSE_NONE) { - LOG_WARN("Failed to find GNSS Module (baudrate %d)", serialSpeed); + LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed); return GNSS_MODEL_UNKNOWN; } else if (response == GNSS_RESPONSE_FRAME_ERRORS) { LOG_INFO("UBlox Frame Errors (baudrate %d)", serialSpeed); @@ -1163,72 +1217,71 @@ GnssModel_t GPS::probe(int serialSpeed) uint16_t len = getACK(buffer, sizeof(buffer), 0x0A, 0x04, 1200); if (len) { - // LOG_DEBUG("monver reply size = %d", len); uint16_t position = 0; for (int i = 0; i < 30; i++) { - info.swVersion[i] = buffer[position]; + ublox_info.swVersion[i] = buffer[position]; position++; } for (int i = 0; i < 10; i++) { - info.hwVersion[i] = buffer[position]; + ublox_info.hwVersion[i] = buffer[position]; position++; } while (len >= position + 30) { for (int i = 0; i < 30; i++) { - info.extension[info.extensionNo][i] = buffer[position]; + ublox_info.extension[ublox_info.extensionNo][i] = buffer[position]; position++; } - info.extensionNo++; - if (info.extensionNo > 9) + ublox_info.extensionNo++; + if (ublox_info.extensionNo > 9) break; } LOG_DEBUG("Module Info : "); - LOG_DEBUG("Soft version: %s", info.swVersion); - LOG_DEBUG("Hard version: %s", info.hwVersion); - LOG_DEBUG("Extensions:%d", info.extensionNo); - for (int i = 0; i < info.extensionNo; i++) { - LOG_DEBUG(" %s", info.extension[i]); + LOG_DEBUG("Soft version: %s", ublox_info.swVersion); + LOG_DEBUG("Hard version: %s", ublox_info.hwVersion); + LOG_DEBUG("Extensions:%d", ublox_info.extensionNo); + for (int i = 0; i < ublox_info.extensionNo; i++) { + LOG_DEBUG(" %s", ublox_info.extension[i]); } memset(buffer, 0, sizeof(buffer)); // tips: extensionNo field is 0 on some 6M GNSS modules - for (int i = 0; i < info.extensionNo; ++i) { - if (!strncmp(info.extension[i], "MOD=", 4)) { - strncpy((char *)buffer, &(info.extension[i][4]), sizeof(buffer)); - } else if (!strncmp(info.extension[i], "PROTVER", 7)) { + for (int i = 0; i < ublox_info.extensionNo; ++i) { + if (!strncmp(ublox_info.extension[i], "MOD=", 4)) { + strncpy((char *)buffer, &(ublox_info.extension[i][4]), sizeof(buffer)); + } else if (!strncmp(ublox_info.extension[i], "PROTVER", 7)) { char *ptr = nullptr; memset(buffer, 0, sizeof(buffer)); - strncpy((char *)buffer, &(info.extension[i][8]), sizeof(buffer)); + strncpy((char *)buffer, &(ublox_info.extension[i][8]), sizeof(buffer)); LOG_DEBUG("Protocol Version:%s", (char *)buffer); if (strlen((char *)buffer)) { - uBloxProtocolVersion = strtoul((char *)buffer, &ptr, 10); - LOG_DEBUG("ProtVer=%d", uBloxProtocolVersion); + ublox_info.protocol_version = strtoul((char *)buffer, &ptr, 10); + LOG_DEBUG("ProtVer=%d", ublox_info.protocol_version); } else { - uBloxProtocolVersion = 0; + ublox_info.protocol_version = 0; } } } - if (strncmp(info.hwVersion, "00040007", 8) == 0) { + if (strncmp(ublox_info.hwVersion, "00040007", 8) == 0) { LOG_INFO(DETECTED_MESSAGE, "U-blox 6", "6"); return GNSS_MODEL_UBLOX6; - } else if (strncmp(info.hwVersion, "00070000", 8) == 0) { + } else if (strncmp(ublox_info.hwVersion, "00070000", 8) == 0) { LOG_INFO(DETECTED_MESSAGE, "U-blox 7", "7"); return GNSS_MODEL_UBLOX7; - } else if (strncmp(info.hwVersion, "00080000", 8) == 0) { + } else if (strncmp(ublox_info.hwVersion, "00080000", 8) == 0) { LOG_INFO(DETECTED_MESSAGE, "U-blox 8", "8"); return GNSS_MODEL_UBLOX8; - } else if (strncmp(info.hwVersion, "00190000", 8) == 0) { + } else if (strncmp(ublox_info.hwVersion, "00190000", 8) == 0) { LOG_INFO(DETECTED_MESSAGE, "U-blox 9", "9"); return GNSS_MODEL_UBLOX9; - } else if (strncmp(info.hwVersion, "000A0000", 8) == 0) { + } else if (strncmp(ublox_info.hwVersion, "000A0000", 8) == 0) { LOG_INFO(DETECTED_MESSAGE, "U-blox 10", "10"); return GNSS_MODEL_UBLOX10; } } - LOG_WARN("Failed to find GNSS Module (baudrate %d)", serialSpeed); + LOG_WARN("No GNSS Module (baudrate %d)", serialSpeed); return GNSS_MODEL_UNKNOWN; } @@ -1271,10 +1324,12 @@ GPS *GPS::createGps() if (!GPS_EN_ACTIVE) { // Need to invert the pin before hardware new GpioNotTransformer( - virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio + virtPin, + p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio } else { new GpioUnaryTransformer( - virtPin, p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio + virtPin, + p); // We just leave this created object on the heap so it can stay watching virtPin and driving en_gpio } } @@ -1289,7 +1344,7 @@ GPS *GPS::createGps() // see NMEAGPS.h gsafixtype.begin(reader, NMEA_MSG_GXGSA, 2); gsapdop.begin(reader, NMEA_MSG_GXGSA, 15); - LOG_DEBUG("Using " NMEA_MSG_GXGSA " for 3DFIX and PDOP"); + LOG_DEBUG("Use " NMEA_MSG_GXGSA " for 3DFIX and PDOP"); #endif // Make sure the GPS is awake before performing any init. @@ -1310,8 +1365,8 @@ GPS *GPS::createGps() // ESP32 has a special set of parameters vs other arduino ports #if defined(ARCH_ESP32) - LOG_DEBUG("Using GPIO%d for GPS RX", new_gps->rx_gpio); - LOG_DEBUG("Using GPIO%d for GPS TX", new_gps->tx_gpio); + LOG_DEBUG("Use GPIO%d for GPS RX", new_gps->rx_gpio); + LOG_DEBUG("Use GPIO%d for GPS TX", new_gps->tx_gpio); _serial_gps->begin(GPS_BAUDRATE, SERIAL_8N1, new_gps->rx_gpio, new_gps->tx_gpio); #elif defined(ARCH_RP2040) _serial_gps->setFIFOSize(256); @@ -1347,26 +1402,22 @@ bool GPS::factoryReset() 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x1C, 0xA2}; _serial_gps->write(_message_reset1, sizeof(_message_reset1)); if (getACK(0x05, 0x01, 10000)) { - LOG_INFO(ACK_SUCCESS_MESSAGE); + LOG_DEBUG(ACK_SUCCESS_MESSAGE); } delay(100); byte _message_reset2[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x1B, 0xA1}; _serial_gps->write(_message_reset2, sizeof(_message_reset2)); if (getACK(0x05, 0x01, 10000)) { - LOG_INFO(ACK_SUCCESS_MESSAGE); + LOG_DEBUG(ACK_SUCCESS_MESSAGE); } delay(100); byte _message_reset3[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x03, 0x1D, 0xB3}; _serial_gps->write(_message_reset3, sizeof(_message_reset3)); if (getACK(0x05, 0x01, 10000)) { - LOG_INFO(ACK_SUCCESS_MESSAGE); + LOG_DEBUG(ACK_SUCCESS_MESSAGE); } - // Reset device ram to COLDSTART state - // byte _message_CFG_RST_COLDSTART[] = {0xB5, 0x62, 0x06, 0x04, 0x04, 0x00, 0xFF, 0xB9, 0x00, 0x00, 0xC6, 0x8B}; - // _serial_gps->write(_message_CFG_RST_COLDSTART, sizeof(_message_CFG_RST_COLDSTART)); - // delay(1000); } else if (gnssModel == GNSS_MODEL_MTK) { // send the CAS10 to perform a factory restart of the device (and other device that support PCAS statements) LOG_INFO("GNSS Factory Reset via PCAS10,3"); @@ -1382,8 +1433,8 @@ bool GPS::factoryReset() _serial_gps->write("$PMTK104*37\r\n"); // No PMTK_ACK for this command. delay(100); - // send the UBLOX Factory Reset Command regardless of detect state, something is very wrong, just assume it's UBLOX. - // Factory Reset + // send the UBLOX Factory Reset Command regardless of detect state, something is very wrong, just assume it's + // UBLOX. Factory Reset byte _message_reset[] = {0xB5, 0x62, 0x06, 0x09, 0x0D, 0x00, 0xFF, 0xFB, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x00, 0x17, 0x2B, 0x7E}; _serial_gps->write(_message_reset, sizeof(_message_reset)); @@ -1422,8 +1473,8 @@ bool GPS::lookForTime() auto d = reader.date; if (ti.isValid() && d.isValid()) { // Note: we don't check for updated, because we'll only be called if needed /* Convert to unix time -The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, 1970 -(midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z). +The Unix epoch (or Unix time or POSIX time or Unix timestamp) is the number of seconds that have elapsed since January 1, +1970 (midnight UTC/GMT), not counting leap seconds (in ISO 8601: 1970-01-01T00:00:00Z). */ struct tm t; t.tm_sec = ti.second() + round(ti.age() / 1000); @@ -1478,7 +1529,7 @@ bool GPS::lookForLocation() #ifndef TINYGPS_OPTION_NO_STATISTICS if (reader.failedChecksum() > lastChecksumFailCount) { - LOG_WARN("%u new GPS checksum failures, for a total of %u.", reader.failedChecksum() - lastChecksumFailCount, + LOG_WARN("%u new GPS checksum failures, for a total of %u", reader.failedChecksum() - lastChecksumFailCount, reader.failedChecksum()); lastChecksumFailCount = reader.failedChecksum(); } @@ -1486,14 +1537,13 @@ bool GPS::lookForLocation() #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS fixType = atoi(gsafixtype.value()); // will set to zero if no data - // LOG_DEBUG("FIX QUAL=%d, TYPE=%d", fixQual, fixType); #endif // check if GPS has an acceptable lock if (!hasLock()) return false; -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("AGE: LOC=%d FIX=%d DATE=%d TIME=%d", reader.location.age(), #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS gsafixtype.age(), @@ -1501,7 +1551,7 @@ bool GPS::lookForLocation() 0, #endif reader.date.age(), reader.time.age()); -#endif // GPS_EXTRAVERBOSE +#endif // GPS_DEBUG // Is this a new point or are we re-reading the previous one? if (!reader.location.isUpdated() && !reader.altitude.isUpdated()) @@ -1524,13 +1574,13 @@ bool GPS::lookForLocation() // Bail out EARLY to avoid overwriting previous good data (like #857) if (toDegInt(loc.lat) > 900000000) { -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("Bail out EARLY on LAT %i", toDegInt(loc.lat)); #endif return false; } if (toDegInt(loc.lng) > 1800000000) { -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("Bail out EARLY on LNG %i", toDegInt(loc.lng)); #endif return false; @@ -1542,7 +1592,6 @@ bool GPS::lookForLocation() #ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS p.HDOP = reader.hdop.value(); p.PDOP = TinyGPSPlus::parseDecimal(gsapdop.value()); - // LOG_DEBUG("PDOP=%d, HDOP=%d", p.PDOP, p.HDOP); #else // FIXME! naive PDOP emulation (assumes VDOP==HDOP) // correct formula is PDOP = SQRT(HDOP^2 + VDOP^2) @@ -1623,24 +1672,25 @@ bool GPS::whileActive() { unsigned int charsInBuf = 0; bool isValid = false; +#ifdef GPS_DEBUG + std::string debugmsg = ""; +#endif if (powerState != GPS_ACTIVE) { clearBuffer(); return false; } #ifdef SERIAL_BUFFER_SIZE if (_serial_gps->available() >= SERIAL_BUFFER_SIZE - 1) { - LOG_WARN("GPS Buffer full with %u bytes waiting. Flushing to avoid corruption.", _serial_gps->available()); + LOG_WARN("GPS Buffer full with %u bytes waiting. Flush to avoid corruption", _serial_gps->available()); clearBuffer(); } #endif - // if (_serial_gps->available() > 0) - // LOG_DEBUG("GPS Bytes Waiting: %u", _serial_gps->available()); // First consume any chars that have piled up at the receiver while (_serial_gps->available() > 0) { int c = _serial_gps->read(); UBXscratch[charsInBuf] = c; #ifdef GPS_DEBUG - LOG_DEBUG("%c", c); + debugmsg += vformat("%c", (c >= 32 && c <= 126) ? c : '.'); #endif isValid |= reader.encode(c); if (charsInBuf > sizeof(UBXscratch) - 10 || c == '\r') { @@ -1652,6 +1702,11 @@ bool GPS::whileActive() charsInBuf++; } } +#ifdef GPS_DEBUG + if (debugmsg != "") { + LOG_DEBUG(debugmsg.c_str()); + } +#endif return isValid; } void GPS::enable() @@ -1679,7 +1734,8 @@ void GPS::toggleGpsMode() { if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_ENABLED) { config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_DISABLED; - LOG_INFO("User toggled GpsMode. Now DISABLED."); + LOG_INFO("User toggled GpsMode. Now DISABLED"); + playGPSDisableBeep(); #ifdef GNSS_AIROHA if (powerState == GPS_ACTIVE) { LOG_DEBUG("User power Off GPS"); @@ -1690,6 +1746,7 @@ void GPS::toggleGpsMode() } else if (config.position.gps_mode == meshtastic_Config_PositionConfig_GpsMode_DISABLED) { config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED; LOG_INFO("User toggled GpsMode. Now ENABLED"); + playGPSEnableBeep(); enable(); } } diff --git a/src/gps/GPS.h b/src/gps/GPS.h index bc95613b3..15fc50fe7 100644 --- a/src/gps/GPS.h +++ b/src/gps/GPS.h @@ -16,13 +16,6 @@ #define GPS_EN_ACTIVE 1 #endif -struct uBloxGnssModelInfo { - char swVersion[30]; - char hwVersion[10]; - uint8_t extensionNo; - char extension[10][30]; -}; - typedef enum { GNSS_MODEL_ATGM336H, GNSS_MODEL_MTK, @@ -34,6 +27,7 @@ typedef enum { GNSS_MODEL_UC6580, GNSS_MODEL_UNKNOWN, GNSS_MODEL_MTK_L76B, + GNSS_MODEL_MTK_PA1616S, GNSS_MODEL_AG3335, GNSS_MODEL_AG3352 } GnssModel_t; @@ -53,9 +47,6 @@ enum GPSPowerState : uint8_t { GPS_OFF // Powered off indefinitely }; -// Generate a string representation of DOP -const char *getDOPString(uint32_t dop); - /** * A gps class that only reads from the GPS periodically and keeps the gps powered down except when reading * @@ -63,101 +54,7 @@ const char *getDOPString(uint32_t dop); */ class GPS : private concurrency::OSThread { - TinyGPSPlus reader; - uint8_t fixQual = 0; // fix quality from GPGGA - uint32_t lastChecksumFailCount = 0; - -#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS - // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field - // via optional feature "custom fields", currently disabled (bug #525) - TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA - TinyGPSCustom gsapdop; // custom extract PDOP from GPGSA - uint8_t fixType = 0; // fix type from GPGSA -#endif - private: - const int serialSpeeds[6] = {9600, 4800, 38400, 57600, 115200, 9600}; - uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0; - uint32_t rx_gpio = 0; - uint32_t tx_gpio = 0; - - int speedSelect = 0; - int probeTries = 2; - - /** - * hasValidLocation - indicates that the position variables contain a complete - * GPS location, valid and fresh (< gps_update_interval + position_broadcast_secs) - */ - bool hasValidLocation = false; // default to false, until we complete our first read - - bool isInPowersave = false; - - bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop() - - bool hasGPS = false; // Do we have a GPS we are talking to - - bool GPSInitFinished = false; // Init thread finished? - bool GPSInitStarted = false; // Init thread finished? - - GPSPowerState powerState = GPS_OFF; // GPS_ACTIVE if we want a location right now - - uint8_t numSatellites = 0; - - CallbackObserver notifyDeepSleepObserver = CallbackObserver(this, &GPS::prepareDeepSleep); - public: - /** If !NULL we will use this serial port to construct our GPS */ -#if defined(ARCH_RP2040) - static SerialUART *_serial_gps; -#else - static HardwareSerial *_serial_gps; -#endif - static uint8_t _message_PMREQ[]; - static uint8_t _message_PMREQ_10[]; - static const uint8_t _message_CFG_RXM_PSM[]; - static const uint8_t _message_CFG_RXM_ECO[]; - static const uint8_t _message_CFG_PM2[]; - static const uint8_t _message_GNSS_7[]; - static const uint8_t _message_GNSS_8[]; - static const uint8_t _message_JAM_6_7[]; - static const uint8_t _message_JAM_8[]; - static const uint8_t _message_NAVX5[]; - static const uint8_t _message_NAVX5_8[]; - static const uint8_t _message_NMEA[]; - static const uint8_t _message_DISABLE_TXT_INFO[]; - static const uint8_t _message_1HZ[]; - static const uint8_t _message_GLL[]; - static const uint8_t _message_GSA[]; - static const uint8_t _message_GSV[]; - static const uint8_t _message_VTG[]; - static const uint8_t _message_RMC[]; - static const uint8_t _message_AID[]; - static const uint8_t _message_GGA[]; - static const uint8_t _message_PMS[]; - static const uint8_t _message_SAVE[]; - static const uint8_t _message_SAVE_10[]; - - // VALSET Commands for M10 - static const uint8_t _message_VALSET_PM[]; - static const uint8_t _message_VALSET_PM_RAM[]; - static const uint8_t _message_VALSET_PM_BBR[]; - static const uint8_t _message_VALSET_ITFM_RAM[]; - static const uint8_t _message_VALSET_ITFM_BBR[]; - static const uint8_t _message_VALSET_DISABLE_NMEA_RAM[]; - static const uint8_t _message_VALSET_DISABLE_NMEA_BBR[]; - static const uint8_t _message_VALSET_DISABLE_TXT_INFO_RAM[]; - static const uint8_t _message_VALSET_DISABLE_TXT_INFO_BBR[]; - static const uint8_t _message_VALSET_ENABLE_NMEA_RAM[]; - static const uint8_t _message_VALSET_ENABLE_NMEA_BBR[]; - static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[]; - static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[]; - - // CASIC commands for ATGM336H - static const uint8_t _message_CAS_CFG_RST_FACTORY[]; - static const uint8_t _message_CAS_CFG_NAVX_CONF[]; - static const uint8_t _message_CAS_CFG_RATE_1HZ[]; - - const char *ACK_SUCCESS_MESSAGE = "Get ack success!"; - meshtastic_Position p = meshtastic_Position_init_default; /** This is normally bound to config.position.gps_en_gpio but some rare boards (like heltec tracker) need more advanced @@ -167,8 +64,6 @@ class GPS : private concurrency::OSThread */ GpioVirtPin *enablePin = NULL; - GPS() : concurrency::OSThread("GPS") {} - virtual ~GPS(); /** We will notify this observable anytime GPS state has changed meaningfully */ @@ -205,21 +100,6 @@ class GPS : private concurrency::OSThread // Empty the input buffer as quickly as possible void clearBuffer(); - // Create a ublox packet for editing in memory - uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg); - uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg); - - // scratch space for creating ublox packets - uint8_t UBXscratch[250] = {0}; - - int rebootsSeen = 0; - - int getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID, uint32_t waitMillis); - GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis); - GPS_RESPONSE getACK(const char *message, uint32_t waitMillis); - - GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis); - virtual bool factoryReset(); // Creates an instance of the GPS class. @@ -232,20 +112,8 @@ class GPS : private concurrency::OSThread // Let the GPS hardware save power between updates void down(); - protected: - /** - * Perform any processing that should be done only while the GPS is awake and looking for a fix. - * Override this method to check for new locations - * - * @return true if we've acquired a time - */ - - /** - * Perform any processing that should be done only while the GPS is awake and looking for a fix. - * Override this method to check for new locations - * - * @return true if we've acquired a new location - */ + private: + GPS() : concurrency::OSThread("GPS") {} /// Record that we have a GPS void setConnected(); @@ -272,15 +140,74 @@ class GPS : private concurrency::OSThread */ virtual bool lookForLocation(); - private: + GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN; + + TinyGPSPlus reader; + uint8_t fixQual = 0; // fix quality from GPGGA + uint32_t lastChecksumFailCount = 0; + +#ifndef TINYGPS_OPTION_NO_CUSTOM_FIELDS + // (20210908) TinyGps++ can only read the GPGSA "FIX TYPE" field + // via optional feature "custom fields", currently disabled (bug #525) + TinyGPSCustom gsafixtype; // custom extract fix type from GPGSA + TinyGPSCustom gsapdop; // custom extract PDOP from GPGSA + uint8_t fixType = 0; // fix type from GPGSA +#endif + + uint32_t lastWakeStartMsec = 0, lastSleepStartMsec = 0, lastFixStartMsec = 0; + uint32_t rx_gpio = 0; + uint32_t tx_gpio = 0; + + uint8_t speedSelect = 0; + uint8_t probeTries = 0; + + /** + * hasValidLocation - indicates that the position variables contain a complete + * GPS location, valid and fresh (< gps_update_interval + position_broadcast_secs) + */ + bool hasValidLocation = false; // default to false, until we complete our first read + + bool isInPowersave = false; + + bool shouldPublish = false; // If we've changed GPS state, this will force a publish the next loop() + + bool hasGPS = false; // Do we have a GPS we are talking to + + bool GPSInitFinished = false; // Init thread finished? + bool GPSInitStarted = false; // Init thread finished? + + GPSPowerState powerState = GPS_OFF; // GPS_ACTIVE if we want a location right now + + uint8_t numSatellites = 0; + + CallbackObserver notifyDeepSleepObserver = CallbackObserver(this, &GPS::prepareDeepSleep); + + /** If !NULL we will use this serial port to construct our GPS */ +#if defined(ARCH_RP2040) + static SerialUART *_serial_gps; +#else + static HardwareSerial *_serial_gps; +#endif + + // Create a ublox packet for editing in memory + uint8_t makeUBXPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg); + uint8_t makeCASPacket(uint8_t class_id, uint8_t msg_id, uint8_t payload_size, const uint8_t *msg); + + // scratch space for creating ublox packets + uint8_t UBXscratch[250] = {0}; + + int rebootsSeen = 0; + + int getACK(uint8_t *buffer, uint16_t size, uint8_t requestedClass, uint8_t requestedID, uint32_t waitMillis); + GPS_RESPONSE getACK(uint8_t c, uint8_t i, uint32_t waitMillis); + GPS_RESPONSE getACK(const char *message, uint32_t waitMillis); + + GPS_RESPONSE getACKCas(uint8_t class_id, uint8_t msg_id, uint32_t waitMillis); + /// Prepare the GPS for the cpu entering deep sleep, expect to be gone for at least 100s of msecs /// always returns 0 to indicate okay to sleep int prepareDeepSleep(void *unused); - // Calculate checksum - void UBXChecksum(uint8_t *message, size_t length); - void CASChecksum(uint8_t *message, size_t length); - /** Set power with EN pin, if relevant */ void writePinEN(bool on); @@ -309,11 +236,6 @@ class GPS : private concurrency::OSThread // delay counter to allow more sats before fixed position stops GPS thread uint8_t fixeddelayCtr = 0; - - const char *powerStateToString(); - - protected: - GnssModel_t gnssModel = GNSS_MODEL_UNKNOWN; }; extern GPS *gps; diff --git a/src/gps/GPSUpdateScheduling.cpp b/src/gps/GPSUpdateScheduling.cpp index 9c2626e84..5eaf7a8ba 100644 --- a/src/gps/GPSUpdateScheduling.cpp +++ b/src/gps/GPSUpdateScheduling.cpp @@ -49,7 +49,7 @@ uint32_t GPSUpdateScheduling::msUntilNextSearch() } // How long have we already been searching? -// Used to abort a search in progress, if it runs unnaceptably long +// Used to abort a search in progress, if it runs unacceptably long uint32_t GPSUpdateScheduling::elapsedSearchMs() { // If searching @@ -70,9 +70,9 @@ bool GPSUpdateScheduling::isUpdateDue() // Have we been searching for a GPS position for too long? bool GPSUpdateScheduling::searchedTooLong() { - uint32_t maxSearchMs = - Default::getConfiguredOrDefaultMs(config.position.position_broadcast_secs, default_broadcast_interval_secs); - + uint32_t minimumOrConfiguredSecs = + Default::getConfiguredOrMinimumValue(config.position.position_broadcast_secs, default_broadcast_interval_secs); + uint32_t maxSearchMs = Default::getConfiguredOrDefaultMs(minimumOrConfiguredSecs, default_broadcast_interval_secs); // If broadcast interval set to max, no such thing as "too long" if (maxSearchMs == UINT32_MAX) return false; @@ -98,7 +98,7 @@ void GPSUpdateScheduling::updateLockTimePrediction() // Ignore the first lock-time: likely to be long, will skew data - // Second locktime: likely stable. Use to intialize the smoothing filter + // Second locktime: likely stable. Use to initialize the smoothing filter if (searchCount == 1) predictedMsToGetLock = lockTime; @@ -106,13 +106,13 @@ void GPSUpdateScheduling::updateLockTimePrediction() else if (searchCount > 1) predictedMsToGetLock = (lockTime * weighting) + (predictedMsToGetLock * (1 - weighting)); - searchCount++; // Only tracked so we can diregard initial lock-times + searchCount++; // Only tracked so we can disregard initial lock-times - LOG_DEBUG("Predicting %us to get next lock", predictedMsToGetLock / 1000); + LOG_DEBUG("Predict %us to get next lock", predictedMsToGetLock / 1000); } // How long do we expect to spend searching for a lock? uint32_t GPSUpdateScheduling::predictedSearchDurationMs() { return GPSUpdateScheduling::predictedMsToGetLock; -} \ No newline at end of file +} diff --git a/src/gps/GeoCoord.cpp b/src/gps/GeoCoord.cpp index 5abb25a06..6d1f2da6d 100644 --- a/src/gps/GeoCoord.cpp +++ b/src/gps/GeoCoord.cpp @@ -574,3 +574,23 @@ const char *GeoCoord::degreesToBearing(unsigned int degrees) else return "N"; } + +double GeoCoord::pow_neg(double base, double exponent) +{ + if (exponent == 0) { + return 1; + } else if (exponent > 0) { + return pow(base, exponent); + } + return 1 / pow(base, -exponent); +} + +double GeoCoord::toRadians(double deg) +{ + return deg * PI / 180; +} + +double GeoCoord::toDegrees(double r) +{ + return r * 180 / PI; +} \ No newline at end of file diff --git a/src/gps/GeoCoord.h b/src/gps/GeoCoord.h index ecdaf0ec7..658c177b3 100644 --- a/src/gps/GeoCoord.h +++ b/src/gps/GeoCoord.h @@ -13,28 +13,6 @@ #define OLC_CODE_LEN 11 #define DEG_CONVERT (180 / PI) -// Helper functions -// Raises a number to an exponent, handling negative exponents. -static inline double pow_neg(double base, double exponent) -{ - if (exponent == 0) { - return 1; - } else if (exponent > 0) { - return pow(base, exponent); - } - return 1 / pow(base, -exponent); -} - -static inline double toRadians(double deg) -{ - return deg * PI / 180; -} - -static inline double toDegrees(double r) -{ - return r * 180 / PI; -} - // GeoCoord structs/classes // A struct to hold the data for a DMS coordinate. struct DMS { @@ -120,6 +98,11 @@ class GeoCoord static unsigned int bearingToDegrees(const char *bearing); static const char *degreesToBearing(unsigned int degrees); + // Raises a number to an exponent, handling negative exponents. + static double pow_neg(double base, double exponent); + static double toRadians(double deg); + static double toDegrees(double r); + // Point to point conversions int32_t distanceTo(const GeoCoord &pointB); int32_t bearingTo(const GeoCoord &pointB); @@ -162,4 +145,4 @@ class GeoCoord // OLC getter void getOLCCode(char *code) { strncpy(code, _olc.code, OLC_CODE_LEN + 1); } // +1 for null termination -}; +}; \ No newline at end of file diff --git a/src/gps/NMEAWPL.cpp b/src/gps/NMEAWPL.cpp index f528c4607..f4249ca62 100644 --- a/src/gps/NMEAWPL.cpp +++ b/src/gps/NMEAWPL.cpp @@ -23,7 +23,7 @@ uint32_t printWPL(char *buf, size_t bufsz, const meshtastic_PositionLite &pos, c { GeoCoord geoCoord(pos.latitude_i, pos.longitude_i, pos.altitude); char type = isCaltopoMode ? 'P' : 'N'; - uint32_t len = snprintf(buf, bufsz, "$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(), + uint32_t len = snprintf(buf, bufsz, "\r\n$G%cWPL,%02d%07.4f,%c,%03d%07.4f,%c,%s", type, geoCoord.getDMSLatDeg(), (abs(geoCoord.getLatitude()) - geoCoord.getDMSLatDeg() * 1e+7) * 6e-6, geoCoord.getDMSLatCP(), geoCoord.getDMSLonDeg(), (abs(geoCoord.getLongitude()) - geoCoord.getDMSLonDeg() * 1e+7) * 6e-6, geoCoord.getDMSLonCP(), name); diff --git a/src/gps/RTC.cpp b/src/gps/RTC.cpp index 8130d7668..af964eab5 100644 --- a/src/gps/RTC.cpp +++ b/src/gps/RTC.cpp @@ -112,7 +112,7 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) uint32_t printableEpoch = tv->tv_sec; // Print lib only supports 32 bit but time_t can be 64 bit on some platforms #ifdef BUILD_EPOCH if (tv->tv_sec < BUILD_EPOCH) { - LOG_WARN("Ignoring time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH); + LOG_WARN("Ignore time (%ld) before build epoch (%ld)!", printableEpoch, BUILD_EPOCH); return false; } #endif @@ -120,21 +120,21 @@ bool perhapsSetRTC(RTCQuality q, const struct timeval *tv, bool forceUpdate) bool shouldSet; if (forceUpdate) { shouldSet = true; - LOG_DEBUG("Overriding current RTC quality (%s) with incoming time of RTC quality of %s", RtcName(currentQuality), + LOG_DEBUG("Override current RTC quality (%s) with incoming time of RTC quality of %s", RtcName(currentQuality), RtcName(q)); } else if (q > currentQuality) { shouldSet = true; - LOG_DEBUG("Upgrading time to quality %s", RtcName(q)); + LOG_DEBUG("Upgrade time to quality %s", RtcName(q)); } else if (q == RTCQualityGPS) { shouldSet = true; - LOG_DEBUG("Reapplying GPS time: %ld secs", printableEpoch); + LOG_DEBUG("Reapply GPS time: %ld secs", printableEpoch); } else if (q == RTCQualityNTP && !Throttle::isWithinTimespanMs(lastSetMsec, (12 * 60 * 60 * 1000UL))) { // Every 12 hrs we will slam in a new NTP or Phone GPS / NTP time, to correct for local RTC clock drift shouldSet = true; - LOG_DEBUG("Reapplying external time to correct clock drift %ld secs", printableEpoch); + LOG_DEBUG("Reapply external time to correct clock drift %ld secs", printableEpoch); } else { shouldSet = false; - LOG_DEBUG("Current RTC quality: %s. Ignoring time of RTC quality of %s", RtcName(currentQuality), RtcName(q)); + LOG_DEBUG("Current RTC quality: %s. Ignore time of RTC quality of %s", RtcName(currentQuality), RtcName(q)); } if (shouldSet) { @@ -230,7 +230,7 @@ bool perhapsSetRTC(RTCQuality q, struct tm &t) // LOG_DEBUG("Got time from GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec); if (t.tm_year < 0 || t.tm_year >= 300) { - // LOG_DEBUG("Ignoring invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec); + // LOG_DEBUG("Ignore invalid GPS month=%d, year=%d, unixtime=%ld", t.tm_mon, t.tm_year, tv.tv_sec); return false; } else { return perhapsSetRTC(q, &tv); diff --git a/src/gps/cas.h b/src/gps/cas.h index 53d75cda9..725fd07b3 100644 --- a/src/gps/cas.h +++ b/src/gps/cas.h @@ -21,7 +21,7 @@ // CFG-RST (0x06, 0x02) // Factory reset -const uint8_t GPS::_message_CAS_CFG_RST_FACTORY[] = { +static const uint8_t _message_CAS_CFG_RST_FACTORY[] = { 0xFF, 0x03, // Fields to clear 0x01, // Reset Mode: Controlled Software reset 0x03 // Startup Mode: Factory @@ -30,7 +30,7 @@ const uint8_t GPS::_message_CAS_CFG_RST_FACTORY[] = { // CFG_RATE (0x06, 0x01) // 1HZ update rate, this should always be the case after // factory reset but update it regardless -const uint8_t GPS::_message_CAS_CFG_RATE_1HZ[] = { +static const uint8_t _message_CAS_CFG_RATE_1HZ[] = { 0xE8, 0x03, // Update Rate: 0x03E8 = 1000ms 0x00, 0x00 // Reserved }; @@ -39,7 +39,7 @@ const uint8_t GPS::_message_CAS_CFG_RATE_1HZ[] = { // Initial ATGM33H-5N configuration, Updates for Dynamic Mode, Fix Mode, and SV system // Qwirk: The ATGM33H-5N-31 should only support GPS+BDS, however it will happily enable // and use GPS+BDS+GLONASS iff the correct CFG_NAVX command is used. -const uint8_t GPS::_message_CAS_CFG_NAVX_CONF[] = { +static const uint8_t _message_CAS_CFG_NAVX_CONF[] = { 0x03, 0x01, 0x00, 0x00, // Update Mask: Dynamic Mode, Fix Mode, Nav Settings 0x03, // Dynamic Mode: Automotive 0x03, // Fix Mode: Auto 2D/3D @@ -60,4 +60,4 @@ const uint8_t GPS::_message_CAS_CFG_NAVX_CONF[] = { 0x00, 0x00, 0x00, 0x00, // Position Accuracy Max 0x00, 0x00, 0x00, 0x00, // Time Accuracy Max 0x00, 0x00, 0x00, 0x00 // Static Hold Threshold -}; \ No newline at end of file +}; diff --git a/src/gps/ubx.h b/src/gps/ubx.h index 68cca00a3..d674bed51 100644 --- a/src/gps/ubx.h +++ b/src/gps/ubx.h @@ -1,20 +1,22 @@ -const char *failMessage = "Unable to %s"; +static const char *failMessage = "Unable to %s"; #define SEND_UBX_PACKET(TYPE, ID, DATA, ERRMSG, TIMEOUT) \ - msglen = makeUBXPacket(TYPE, ID, sizeof(DATA), DATA); \ - _serial_gps->write(UBXscratch, msglen); \ - if (getACK(TYPE, ID, TIMEOUT) != GNSS_RESPONSE_OK) { \ - LOG_WARN(failMessage, #ERRMSG); \ - } + do { \ + msglen = makeUBXPacket(TYPE, ID, sizeof(DATA), DATA); \ + _serial_gps->write(UBXscratch, msglen); \ + if (getACK(TYPE, ID, TIMEOUT) != GNSS_RESPONSE_OK) { \ + LOG_WARN(failMessage, #ERRMSG); \ + } \ + } while (0) // Power Management -uint8_t GPS::_message_PMREQ[] PROGMEM = { +static uint8_t _message_PMREQ[] PROGMEM = { 0x00, 0x00, 0x00, 0x00, // 4 bytes duration of request task (milliseconds) 0x02, 0x00, 0x00, 0x00 // Bitfield, set backup = 1 }; -uint8_t GPS::_message_PMREQ_10[] PROGMEM = { +static uint8_t _message_PMREQ_10[] PROGMEM = { 0x00, // version (0 for this version) 0x00, 0x00, 0x00, // Reserved 1 0x00, 0x00, 0x00, 0x00, // 4 bytes duration of request task (milliseconds) @@ -22,18 +24,18 @@ uint8_t GPS::_message_PMREQ_10[] PROGMEM = { 0x08, 0x00, 0x00, 0x00 // wakeupSources Wake on uartrx }; -const uint8_t GPS::_message_CFG_RXM_PSM[] PROGMEM = { +static const uint8_t _message_CFG_RXM_PSM[] PROGMEM = { 0x08, // Reserved 0x01 // Power save mode }; // only for Neo-6 -const uint8_t GPS::_message_CFG_RXM_ECO[] PROGMEM = { +static const uint8_t _message_CFG_RXM_ECO[] PROGMEM = { 0x08, // Reserved 0x04 // eco mode }; -const uint8_t GPS::_message_CFG_PM2[] PROGMEM = { +static const uint8_t _message_CFG_PM2[] PROGMEM = { 0x01, // version 0x00, // Reserved 1, set to 0x06 by u-Center 0x00, // Reserved 2 @@ -58,7 +60,7 @@ const uint8_t GPS::_message_CFG_PM2[] PROGMEM = { // Constallation setup, none required for Neo-6 // For Neo-7 GPS & SBAS -const uint8_t GPS::_message_GNSS_7[] = { +static const uint8_t _message_GNSS_7[] = { 0x00, // msgVer (0 for this version) 0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0) 0xff, // numTrkChUse (max number of channels to use, 0xff = max available) @@ -76,7 +78,7 @@ const uint8_t GPS::_message_GNSS_7[] = { // There is also a possibility that the module may be GPS-only. // For M8 GPS, GLONASS, Galileo, SBAS, QZSS -const uint8_t GPS::_message_GNSS_8[] = { +static const uint8_t _message_GNSS_8[] = { 0x00, // msgVer (0 for this version) 0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0) 0xff, // numTrkChUse (max number of channels to use, 0xff = max available) @@ -90,7 +92,7 @@ const uint8_t GPS::_message_GNSS_8[] = { }; /* // For M8 GPS, GLONASS, BeiDou, SBAS, QZSS -const uint8_t GPS::_message_GNSS_8_B[] = { +static const uint8_t _message_GNSS_8_B[] = { 0x00, // msgVer (0 for this version) 0x00, // numTrkChHw (max number of hardware channels, read only, so it's always 0) 0xff, // numTrkChUse (max number of channels to use, 0xff = max available) read only for protocol >23 @@ -105,7 +107,7 @@ const uint8_t GPS::_message_GNSS_8_B[] = { */ // For M8 we want to enable NMEA version 4.10 messages to allow for Galileo and or BeiDou -const uint8_t GPS::_message_NMEA[]{ +static const uint8_t _message_NMEA[]{ 0x00, // filter flags 0x41, // NMEA Version 0x00, // Max number of SVs to report per TaklerId @@ -121,13 +123,13 @@ const uint8_t GPS::_message_NMEA[]{ // Enable jamming/interference monitor // For Neo-6, Max-7 and Neo-7 -const uint8_t GPS::_message_JAM_6_7[] = { +static const uint8_t _message_JAM_6_7[] = { 0xf3, 0xac, 0x62, 0xad, // config1 bbThreshold = 3, cwThreshold = 15, enable = 1, reserved bits 0x16B156 0x1e, 0x03, 0x00, 0x00 // config2 antennaSetting Unknown = 0, reserved 3, = 0x00,0x00, reserved 2 = 0x31E }; // For M8 -const uint8_t GPS::_message_JAM_8[] = { +static const uint8_t _message_JAM_8[] = { 0xf3, 0xac, 0x62, 0xad, // config1 bbThreshold = 3, cwThreshold = 15, enable1 = 1, reserved bits 0x16B156 0x1e, 0x43, 0x00, 0x00 // config2 antennaSetting Unknown = 0, enable2 = 1, generalBits = 0x31E }; @@ -137,7 +139,7 @@ const uint8_t GPS::_message_JAM_8[] = { // ToDo: check UBX-MON-VER for module type and protocol version // For the Neo-6 -const uint8_t GPS::_message_NAVX5[] = { +static const uint8_t _message_NAVX5[] = { 0x00, 0x00, // msgVer (0 for this version) 0x4c, 0x66, // mask1 0x00, 0x00, 0x00, 0x00, // Reserved 0 @@ -166,7 +168,7 @@ const uint8_t GPS::_message_NAVX5[] = { 0x00, 0x00, 0x00, 0x00 // Reserved 4 }; // For the M8 -const uint8_t GPS::_message_NAVX5_8[] = { +static const uint8_t _message_NAVX5_8[] = { 0x02, 0x00, // msgVer (2 for this version) 0x4c, 0x66, // mask1 0x00, 0x00, 0x00, 0x00, // mask2 @@ -197,7 +199,7 @@ const uint8_t GPS::_message_NAVX5_8[] = { // Additionally, for some new modules like the M9/M10, an update rate lower than 5Hz // is recommended to avoid a known issue with satellites disappearing. // The module defaults for M8, M9, M10 are the same as we use here so no update is necessary -const uint8_t GPS::_message_1HZ[] = { +static const uint8_t _message_1HZ[] = { 0xE8, 0x03, // Measurement Rate (1000ms for 1Hz) 0x01, 0x00, // Navigation rate, always 1 in GPS mode 0x01, 0x00 // Time reference @@ -205,7 +207,7 @@ const uint8_t GPS::_message_1HZ[] = { // Disable GLL. GLL - Geographic position (latitude and longitude), which provides the current geographical // coordinates. -const uint8_t GPS::_message_GLL[] = { +static const uint8_t _message_GLL[] = { 0xF0, 0x01, // NMEA ID for GLL 0x00, // Rate for DDC 0x00, // Rate for UART1 @@ -217,7 +219,7 @@ const uint8_t GPS::_message_GLL[] = { // Disable GSA. GSA - GPS DOP and active satellites, used for detailing the satellites used in the positioning and // the DOP (Dilution of Precision) -const uint8_t GPS::_message_GSA[] = { +static const uint8_t _message_GSA[] = { 0xF0, 0x02, // NMEA ID for GSA 0x00, // Rate for DDC 0x00, // Rate for UART1 @@ -228,7 +230,7 @@ const uint8_t GPS::_message_GSA[] = { }; // Disable GSV. GSV - Satellites in view, details the number and location of satellites in view. -const uint8_t GPS::_message_GSV[] = { +static const uint8_t _message_GSV[] = { 0xF0, 0x03, // NMEA ID for GSV 0x00, // Rate for DDC 0x00, // Rate for UART1 @@ -240,7 +242,7 @@ const uint8_t GPS::_message_GSV[] = { // Disable VTG. VTG - Track made good and ground speed, which provides course and speed information relative to // the ground. -const uint8_t GPS::_message_VTG[] = { +static const uint8_t _message_VTG[] = { 0xF0, 0x05, // NMEA ID for VTG 0x00, // Rate for DDC 0x00, // Rate for UART1 @@ -251,7 +253,7 @@ const uint8_t GPS::_message_VTG[] = { }; // Enable RMC. RMC - Recommended Minimum data, the essential gps pvt (position, velocity, time) data. -const uint8_t GPS::_message_RMC[] = { +static const uint8_t _message_RMC[] = { 0xF0, 0x04, // NMEA ID for RMC 0x00, // Rate for DDC 0x01, // Rate for UART1 @@ -262,7 +264,7 @@ const uint8_t GPS::_message_RMC[] = { }; // Enable GGA. GGA - Global Positioning System Fix Data, which provides 3D location and accuracy data. -const uint8_t GPS::_message_GGA[] = { +static const uint8_t _message_GGA[] = { 0xF0, 0x00, // NMEA ID for GGA 0x00, // Rate for DDC 0x01, // Rate for UART1 @@ -274,7 +276,7 @@ const uint8_t GPS::_message_GGA[] = { // Disable UBX-AID-ALPSRV as it may confuse TinyGPS. The Neo-6 seems to send this message // whether the AID Autonomous is enabled or not -const uint8_t GPS::_message_AID[] = { +static const uint8_t _message_AID[] = { 0x0B, 0x32, // NMEA ID for UBX-AID-ALPSRV 0x00, // Rate for DDC 0x00, // Rate for UART1 @@ -287,7 +289,7 @@ const uint8_t GPS::_message_AID[] = { // Turn off TEXT INFO Messages for all but M10 series // B5 62 06 02 0A 00 01 00 00 00 03 03 00 03 03 00 1F 20 -const uint8_t GPS::_message_DISABLE_TXT_INFO[] = { +static const uint8_t _message_DISABLE_TXT_INFO[] = { 0x01, // Protocol ID for NMEA 0x00, 0x00, 0x00, // Reserved 0x03, // I2C @@ -310,7 +312,7 @@ const uint8_t GPS::_message_DISABLE_TXT_INFO[] = { // and must be smaller than the period. It is only valid when the powerSetupValue is set to Interval; otherwise, // it must be set to '0'. // This command applies to M8 products -const uint8_t GPS::_message_PMS[] = { +static const uint8_t _message_PMS[] = { 0x00, // Version (0) 0x03, // Power setup value 3 = Agresssive 1Hz 0x00, 0x00, // period: not applicable, set to 0 @@ -318,14 +320,14 @@ const uint8_t GPS::_message_PMS[] = { 0x00, 0x00 // reserved, generated by u-center }; -const uint8_t GPS::_message_SAVE[] = { +static const uint8_t _message_SAVE[] = { 0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared 0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections 0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded 0x17 // deviceMask: BBR, Flash, EEPROM, and SPI Flash }; -const uint8_t GPS::_message_SAVE_10[] = { +static const uint8_t _message_SAVE_10[] = { 0x00, 0x00, 0x00, 0x00, // clearMask: no sections cleared 0xFF, 0xFF, 0x00, 0x00, // saveMask: save all sections 0x00, 0x00, 0x00, 0x00, // loadMask: no sections loaded @@ -375,12 +377,12 @@ LIMITPEAKCURRENT L 1 // b5 62 06 8a 26 00 00 02 00 00 01 00 d0 20 02 02 00 d0 40 05 00 00 00 05 00 d0 30 01 00 08 00 d0 10 01 09 00 d0 10 01 10 00 d0 // 10 01 8c 03 */ -const uint8_t GPS::_message_VALSET_PM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40, - 0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0, - 0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01}; -const uint8_t GPS::_message_VALSET_PM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40, - 0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0, - 0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01}; +static const uint8_t _message_VALSET_PM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40, + 0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0, + 0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01}; +static const uint8_t _message_VALSET_PM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0xd0, 0x20, 0x02, 0x02, 0x00, 0xd0, 0x40, + 0x05, 0x00, 0x00, 0x00, 0x05, 0x00, 0xd0, 0x30, 0x01, 0x00, 0x08, 0x00, 0xd0, + 0x10, 0x01, 0x09, 0x00, 0xd0, 0x10, 0x01, 0x10, 0x00, 0xd0, 0x10, 0x01}; /* CFG-ITFM replaced by 5 valset messages which can be combined into one for RAM and one for BBR @@ -394,10 +396,10 @@ CFG-ITFM replaced by 5 valset messages which can be combined into one for RAM an b5 62 06 8a 0e 00 00 01 00 00 0d 00 41 10 01 13 00 41 10 01 63 c6 */ -const uint8_t GPS::_message_VALSET_ITFM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x0d, 0x00, 0x41, - 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01}; -const uint8_t GPS::_message_VALSET_ITFM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x0d, 0x00, 0x41, - 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01}; +static const uint8_t _message_VALSET_ITFM_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x0d, 0x00, 0x41, + 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01}; +static const uint8_t _message_VALSET_ITFM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x0d, 0x00, 0x41, + 0x10, 0x01, 0x13, 0x00, 0x41, 0x10, 0x01}; // Turn off all NMEA messages: // Ram layer config message: @@ -407,13 +409,13 @@ const uint8_t GPS::_message_VALSET_ITFM_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x0d, 0 // BBR layer config message: // b5 62 06 8a 13 00 00 02 00 00 ca 00 91 20 00 c5 00 91 20 00 b1 00 91 20 00 f8 4e -const uint8_t GPS::_message_VALSET_DISABLE_NMEA_RAM[] = { +static const uint8_t _message_VALSET_DISABLE_NMEA_RAM[] = { /*0x00, 0x01, 0x00, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00 */ 0x00, 0x01, 0x00, 0x00, 0xc0, 0x00, 0x91, 0x20, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, 0x00, 0x91, 0x20, 0x00, 0xac, 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00, 0xbb, 0x00, 0x91, 0x20, 0x00}; -const uint8_t GPS::_message_VALSET_DISABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, - 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00}; +static const uint8_t _message_VALSET_DISABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xca, 0x00, 0x91, 0x20, 0x00, 0xc5, + 0x00, 0x91, 0x20, 0x00, 0xb1, 0x00, 0x91, 0x20, 0x00}; // Turn off text info messages: // Ram layer config message: @@ -432,17 +434,17 @@ const uint8_t GPS::_message_VALSET_DISABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, // b5 62 06 8a 0e 00 00 04 00 00 bb 00 91 20 01 ac 00 91 20 01 6d b6 // Doing this for the FLASH layer isn't really required since we save the config to flash later -const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03}; -const uint8_t GPS::_message_VALSET_DISABLE_TXT_INFO_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03}; +static const uint8_t _message_VALSET_DISABLE_TXT_INFO_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03}; +static const uint8_t _message_VALSET_DISABLE_TXT_INFO_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x07, 0x00, 0x92, 0x20, 0x03}; -const uint8_t GPS::_message_VALSET_ENABLE_NMEA_RAM[] = {0x00, 0x01, 0x00, 0x00, 0xbb, 0x00, 0x91, - 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01}; -const uint8_t GPS::_message_VALSET_ENABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xbb, 0x00, 0x91, - 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01}; -const uint8_t GPS::_message_VALSET_DISABLE_SBAS_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x31, - 0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00}; -const uint8_t GPS::_message_VALSET_DISABLE_SBAS_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x20, 0x00, 0x31, - 0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00}; +static const uint8_t _message_VALSET_ENABLE_NMEA_RAM[] = {0x00, 0x01, 0x00, 0x00, 0xbb, 0x00, 0x91, + 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01}; +static const uint8_t _message_VALSET_ENABLE_NMEA_BBR[] = {0x00, 0x02, 0x00, 0x00, 0xbb, 0x00, 0x91, + 0x20, 0x01, 0xac, 0x00, 0x91, 0x20, 0x01}; +static const uint8_t _message_VALSET_DISABLE_SBAS_RAM[] = {0x00, 0x01, 0x00, 0x00, 0x20, 0x00, 0x31, + 0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00}; +static const uint8_t _message_VALSET_DISABLE_SBAS_BBR[] = {0x00, 0x02, 0x00, 0x00, 0x20, 0x00, 0x31, + 0x10, 0x00, 0x05, 0x00, 0x31, 0x10, 0x00}; /* Operational issues with the M10: @@ -462,7 +464,7 @@ the PM config. Lets try without it. PMREQ sort of works with SBAS, but the awake time is too short to re-acquire any SBAS sats. The defination of "Got Fix" doesn't seem to include SBAS. Much more too this... Even if it was, it can take minutes (up to 12.5), -even under good sat visability conditions to re-acquire the SBAS data. +even under good sat visibility conditions to re-acquire the SBAS data. Another effect fo the quick transition to sleep is that no other sats will be acquired so the sat count will tend to remain at what the initial fix was. @@ -475,4 +477,4 @@ b5 62 06 8a 0e 00 00 01 00 00 20 00 31 10 00 05 00 31 10 00 46 87 BBR layer config message: b5 62 06 8a 0e 00 00 02 00 00 20 00 31 10 00 05 00 31 10 00 47 94 -*/ \ No newline at end of file +*/ diff --git a/src/graphics/EInkDisplay2.cpp b/src/graphics/EInkDisplay2.cpp index 4a18cca98..8938641ee 100644 --- a/src/graphics/EInkDisplay2.cpp +++ b/src/graphics/EInkDisplay2.cpp @@ -80,7 +80,7 @@ bool EInkDisplay::forceDisplay(uint32_t msecLimit) } // Trigger the refresh in GxEPD2 - LOG_DEBUG("Updating E-Paper"); + LOG_DEBUG("Update E-Paper"); adafruitDisplay->nextPage(); // End the update process @@ -124,7 +124,7 @@ void EInkDisplay::setDetected(uint8_t detected) // Connect to the display - variant specific bool EInkDisplay::connect() { - LOG_INFO("Doing EInk init"); + LOG_INFO("Do EInk init"); #ifdef PIN_EINK_EN // backlight power, HIGH is backlight on, LOW is off diff --git a/src/graphics/EInkDynamicDisplay.cpp b/src/graphics/EInkDynamicDisplay.cpp index ac5755bc1..6664646b9 100644 --- a/src/graphics/EInkDynamicDisplay.cpp +++ b/src/graphics/EInkDynamicDisplay.cpp @@ -119,7 +119,7 @@ void EInkDynamicDisplay::endOrDetach() awaitRefresh(); else { // Async begins - LOG_DEBUG("Async full-refresh begins (dropping frames)"); + LOG_DEBUG("Async full-refresh begins (drop frames)"); notifyLater(intervalPollAsyncRefresh, DUE_POLL_ASYNCREFRESH, true); // Hand-off to NotifiedWorkerThread } } @@ -170,7 +170,7 @@ bool EInkDynamicDisplay::determineMode() checkFastRequested(); if (refresh == UNSPECIFIED) - LOG_WARN("There was a flaw in the determineMode() logic."); + LOG_WARN("There was a flaw in the determineMode() logic"); // -- Decision has been reached -- applyRefreshMode(); @@ -469,7 +469,7 @@ void EInkDynamicDisplay::joinAsyncRefresh() if (!asyncRefreshRunning) return; - LOG_DEBUG("Joining an async refresh in progress"); + LOG_DEBUG("Join an async refresh in progress"); // Continually poll the BUSY pin while (adafruitDisplay->epd2.isBusy()) diff --git a/src/graphics/Screen.cpp b/src/graphics/Screen.cpp index efa3ec78f..31647c92d 100644 --- a/src/graphics/Screen.cpp +++ b/src/graphics/Screen.cpp @@ -20,7 +20,6 @@ along with this program. If not, see . */ #include "Screen.h" -#include "../userPrefs.h" #include "PowerMon.h" #include "Throttle.h" #include "configuration.h" @@ -101,9 +100,9 @@ std::vector moduleFrames; static char ourId[5]; // vector where symbols (string) are displayed in bottom corner of display. -std::vector functionSymbals; -// string displayed in bottom right corner of display. Created from elements in functionSymbals vector -std::string functionSymbalString = ""; +std::vector functionSymbol; +// string displayed in bottom right corner of display. Created from elements in functionSymbol vector +std::string functionSymbolString = ""; #if HAS_GPS // GeoCoord object for the screen @@ -127,7 +126,7 @@ static bool heartbeat = false; /// Check if the display can render a string (detect special chars; emoji) static bool haveGlyphs(const char *str) { -#if defined(OLED_PL) || defined(OLED_UA) || defined(OLED_RU) +#if defined(OLED_PL) || defined(OLED_UA) || defined(OLED_RU) || defined(OLED_CS) // Don't want to make any assumptions about custom language support return true; #endif @@ -242,11 +241,11 @@ static void drawWelcomeScreen(OLEDDisplay *display, OLEDDisplayUiState *state, i // draw overlay in bottom right corner of screen to show when notifications are muted or modifier key is active static void drawFunctionOverlay(OLEDDisplay *display, OLEDDisplayUiState *state) { - // LOG_DEBUG("Drawing function overlay"); - if (functionSymbals.begin() != functionSymbals.end()) { + // LOG_DEBUG("Draw function overlay"); + if (functionSymbol.begin() != functionSymbol.end()) { char buf[64]; display->setFont(FONT_SMALL); - snprintf(buf, sizeof(buf), "%s", functionSymbalString.c_str()); + snprintf(buf, sizeof(buf), "%s", functionSymbolString.c_str()); display->drawString(SCREEN_WIDTH - display->getStringWidth(buf), SCREEN_HEIGHT - FONT_HEIGHT_SMALL, buf); } } @@ -260,7 +259,7 @@ static void drawDeepSleepScreen(OLEDDisplay *display, OLEDDisplayUiState *state, EINK_ADD_FRAMEFLAG(display, COSMETIC); EINK_ADD_FRAMEFLAG(display, BLOCKING); - LOG_DEBUG("Drawing deep sleep screen"); + LOG_DEBUG("Draw deep sleep screen"); // Display displayStr on the screen drawIconScreen("Sleeping", display, state, x, y); @@ -269,7 +268,7 @@ static void drawDeepSleepScreen(OLEDDisplay *display, OLEDDisplayUiState *state, /// Used on eink displays when screen updates are paused static void drawScreensaverOverlay(OLEDDisplay *display, OLEDDisplayUiState *state) { - LOG_DEBUG("Drawing screensaver overlay"); + LOG_DEBUG("Draw screensaver overlay"); EINK_ADD_FRAMEFLAG(display, COSMETIC); // Take the opportunity for a full-refresh @@ -337,7 +336,7 @@ static void drawModuleFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int module_frame = state->currentFrame; // LOG_DEBUG("Screen is not in transition. Frame: %d", module_frame); } - // LOG_DEBUG("Drawing Module Frame %d", module_frame); + // LOG_DEBUG("Draw Module Frame %d", module_frame); MeshModule &pi = *moduleFrames.at(module_frame); pi.drawFrame(display, state, x, y); } @@ -396,7 +395,7 @@ static void drawBattery(OLEDDisplay *display, int16_t x, int16_t y, uint8_t *img display->drawFastImage(x, y, 16, 8, imgBuffer); } -#ifdef T_WATCH_S3 +#if defined(DISPLAY_CLOCK_FRAME) void Screen::drawWatchFaceToggleButton(OLEDDisplay *display, int16_t x, int16_t y, bool digitalMode, float scale) { @@ -912,7 +911,7 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state const meshtastic_MeshPacket &mp = devicestate.rx_text_message; meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(getFrom(&mp)); - // LOG_DEBUG("drawing text message from 0x%x: %s", mp.from, + // LOG_DEBUG("Draw text message from 0x%x: %s", mp.from, // mp.decoded.variant.data.decoded.bytes); // Demo for drawStringMaxWidth: @@ -958,55 +957,65 @@ static void drawTextMessageFrame(OLEDDisplay *display, OLEDDisplayUiState *state display->setColor(WHITE); #ifndef EXCLUDE_EMOJI - if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F44D") == 0) { + const char *msg = reinterpret_cast(mp.decoded.payload.bytes); + if (strcmp(msg, "\U0001F44D") == 0) { display->drawXbm(x + (SCREEN_WIDTH - thumbs_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - thumbs_height) / 2 + 2 + 5, thumbs_width, thumbs_height, thumbup); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F44E") == 0) { + } else if (strcmp(msg, "\U0001F44E") == 0) { display->drawXbm(x + (SCREEN_WIDTH - thumbs_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - thumbs_height) / 2 + 2 + 5, thumbs_width, thumbs_height, thumbdown); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "❓") == 0) { + } else if (strcmp(msg, "\U0001F60A") == 0 || strcmp(msg, "\U0001F600") == 0 || strcmp(msg, "\U0001F642") == 0 || + strcmp(msg, "\U0001F609") == 0 || + strcmp(msg, "\U0001F601") == 0) { // matches 5 different common smileys, so that the phone user doesn't have to + // remember which one is compatible + display->drawXbm(x + (SCREEN_WIDTH - smiley_width) / 2, + y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - smiley_height) / 2 + 2 + 5, smiley_width, smiley_height, + smiley); + } else if (strcmp(msg, "❓") == 0) { display->drawXbm(x + (SCREEN_WIDTH - question_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - question_height) / 2 + 2 + 5, question_width, question_height, question); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "‼️") == 0) { + } else if (strcmp(msg, "‼️") == 0) { display->drawXbm(x + (SCREEN_WIDTH - bang_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - bang_height) / 2 + 2 + 5, bang_width, bang_height, bang); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F4A9") == 0) { + } else if (strcmp(msg, "\U0001F4A9") == 0) { display->drawXbm(x + (SCREEN_WIDTH - poo_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - poo_height) / 2 + 2 + 5, poo_width, poo_height, poo); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\xf0\x9f\xa4\xa3") == 0) { + } else if (strcmp(msg, "\U0001F923") == 0) { display->drawXbm(x + (SCREEN_WIDTH - haha_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - haha_height) / 2 + 2 + 5, haha_width, haha_height, haha); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F44B") == 0) { + } else if (strcmp(msg, "\U0001F44B") == 0) { display->drawXbm(x + (SCREEN_WIDTH - wave_icon_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - wave_icon_height) / 2 + 2 + 5, wave_icon_width, wave_icon_height, wave_icon); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F920") == 0) { + } else if (strcmp(msg, "\U0001F920") == 0) { display->drawXbm(x + (SCREEN_WIDTH - cowboy_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - cowboy_height) / 2 + 2 + 5, cowboy_width, cowboy_height, cowboy); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\U0001F42D") == 0) { + } else if (strcmp(msg, "\U0001F42D") == 0) { display->drawXbm(x + (SCREEN_WIDTH - deadmau5_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - deadmau5_height) / 2 + 2 + 5, deadmau5_width, deadmau5_height, deadmau5); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\xE2\x98\x80\xEF\xB8\x8F") == 0) { + } else if (strcmp(msg, "\xE2\x98\x80\xEF\xB8\x8F") == 0) { display->drawXbm(x + (SCREEN_WIDTH - sun_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - sun_height) / 2 + 2 + 5, sun_width, sun_height, sun); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\u2614") == 0) { + } else if (strcmp(msg, "\u2614") == 0) { display->drawXbm(x + (SCREEN_WIDTH - rain_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - rain_height) / 2 + 2 + 10, rain_width, rain_height, rain); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "☁️") == 0) { + } else if (strcmp(msg, "☁️") == 0) { display->drawXbm(x + (SCREEN_WIDTH - cloud_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - cloud_height) / 2 + 2 + 5, cloud_width, cloud_height, cloud); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "🌫️") == 0) { + } else if (strcmp(msg, "🌫️") == 0) { display->drawXbm(x + (SCREEN_WIDTH - fog_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - fog_height) / 2 + 2 + 5, fog_width, fog_height, fog); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "\xf0\x9f\x98\x88") == 0) { + } else if (strcmp(msg, "\U0001F608") == 0) { display->drawXbm(x + (SCREEN_WIDTH - devil_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - devil_height) / 2 + 2 + 5, devil_width, devil_height, devil); - } else if (strcmp(reinterpret_cast(mp.decoded.payload.bytes), "♥️") == 0) { + } else if (strcmp(msg, "♥️") == 0 || strcmp(msg, "\U0001F9E1") == 0 || strcmp(msg, "\U00002763") == 0 || + strcmp(msg, "\U00002764") == 0 || strcmp(msg, "\U0001F495") == 0 || strcmp(msg, "\U0001F496") == 0 || + strcmp(msg, "\U0001F497") == 0 || strcmp(msg, "\U0001F498") == 0) { display->drawXbm(x + (SCREEN_WIDTH - heart_width) / 2, y + (SCREEN_HEIGHT - FONT_HEIGHT_MEDIUM - heart_height) / 2 + 2 + 5, heart_width, heart_height, heart); } else { @@ -1410,7 +1419,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_ } bool hasNodeHeading = false; - if (ourNode && (hasValidPosition(ourNode) || screen->hasHeading())) { + if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading())) { const meshtastic_PositionLite &op = ourNode->position; float myHeading; if (screen->hasHeading()) @@ -1419,7 +1428,7 @@ static void drawNodeInfo(OLEDDisplay *display, OLEDDisplayUiState *state, int16_ myHeading = screen->estimatedHeading(DegD(op.latitude_i), DegD(op.longitude_i)); screen->drawCompassNorth(display, compassX, compassY, myHeading); - if (hasValidPosition(node)) { + if (nodeDB->hasValidPosition(node)) { // display direction toward node hasNodeHeading = true; const meshtastic_PositionLite &p = node->position; @@ -1499,7 +1508,7 @@ Screen::Screen(ScanI2C::DeviceAddress address, meshtastic_Config_DisplayConfig_O (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE); #elif ARCH_PORTDUINO if (settingsMap[displayPanel] != no_screen) { - LOG_DEBUG("Making TFTDisplay!"); + LOG_DEBUG("Make TFTDisplay!"); dispdev = new TFTDisplay(address.address, -1, -1, geometry, (address.port == ScanI2C::I2CPort::WIRE1) ? HW_I2C::I2C_TWO : HW_I2C::I2C_ONE); } else { @@ -1546,7 +1555,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver) if (on != screenOn) { if (on) { - LOG_INFO("Turning on screen"); + LOG_INFO("Turn on screen"); powerMon->setState(meshtastic_PowerMon_State_Screen_On); #ifdef T_WATCH_S3 PMU->enablePowerOutput(XPOWERS_ALDO2); @@ -1581,7 +1590,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver) // eInkScreensaver parameter is usually NULL (default argument), default frame used instead setScreensaverFrames(einkScreensaver); #endif - LOG_INFO("Turning off screen"); + LOG_INFO("Turn off screen"); dispdev->displayOff(); #ifdef USE_ST7789 SPI1.end(); @@ -1709,7 +1718,7 @@ void Screen::setup() #endif serialSinceMsec = millis(); -#if ARCH_PORTDUINO +#if ARCH_PORTDUINO && !HAS_TFT if (settingsMap[touchscreenModule]) { touchScreenImpl1 = new TouchScreenImpl1(dispdev->getWidth(), dispdev->getHeight(), static_cast(dispdev)->getTouch); @@ -1789,7 +1798,7 @@ int32_t Screen::runOnce() // serialSinceMsec adjusts for additional serial wait time during nRF52 bootup static bool showingBootScreen = true; if (showingBootScreen && (millis() > (logo_timeout + serialSinceMsec))) { - LOG_INFO("Done with boot screen..."); + LOG_INFO("Done with boot screen"); stopBootScreen(); showingBootScreen = false; } @@ -1885,7 +1894,7 @@ int32_t Screen::runOnce() EINK_ADD_FRAMEFLAG(dispdev, COSMETIC); #endif - LOG_DEBUG("LastScreenTransition exceeded %ums transitioning to next frame", (millis() - lastScreenTransition)); + LOG_DEBUG("LastScreenTransition exceeded %ums transition to next frame", (millis() - lastScreenTransition)); handleOnPress(); } } @@ -1921,7 +1930,7 @@ void Screen::drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiStat void Screen::setSSLFrames() { if (address_found.address) { - // LOG_DEBUG("showing SSL frames"); + // LOG_DEBUG("Show SSL frames"); static FrameCallback sslFrames[] = {drawSSLScreen}; ui->setFrames(sslFrames, 1); ui->update(); @@ -1933,7 +1942,7 @@ void Screen::setSSLFrames() void Screen::setWelcomeFrames() { if (address_found.address) { - // LOG_DEBUG("showing Welcome frames"); + // LOG_DEBUG("Show Welcome frames"); static FrameCallback frames[] = {drawWelcomeScreen}; setFrameImmediateDraw(frames); } @@ -1999,7 +2008,7 @@ void Screen::setFrames(FrameFocus focus) uint8_t originalPosition = ui->getUiState()->currentFrame; FramesetInfo fsi; // Location of specific frames, for applying focus parameter - LOG_DEBUG("showing standard frames"); + LOG_DEBUG("Show standard frames"); showingNormalScreen = true; #ifdef USE_EINK @@ -2012,7 +2021,7 @@ void Screen::setFrames(FrameFocus focus) #endif moduleFrames = MeshModule::GetMeshModulesWithUIFrames(); - LOG_DEBUG("Showing %d module frames", moduleFrames.size()); + LOG_DEBUG("Show %d module frames", moduleFrames.size()); #ifdef DEBUG_PORT int totalFrameCount = MAX_NUM_NODES + NUM_EXTRA_FRAMES + moduleFrames.size(); LOG_DEBUG("Total frame count: %d", totalFrameCount); @@ -2058,7 +2067,7 @@ void Screen::setFrames(FrameFocus focus) focus = FOCUS_FAULT; // Change our "focus" parameter, to ensure we show the fault frame } -#ifdef T_WATCH_S3 +#if defined(DISPLAY_CLOCK_FRAME) normalFrames[numframes++] = screen->digitalWatchFace ? &Screen::drawDigitalClockFrame : &Screen::drawAnalogClockFrame; #endif @@ -2094,7 +2103,7 @@ void Screen::setFrames(FrameFocus focus) #endif fsi.frameCount = numframes; // Total framecount is used to apply FOCUS_PRESERVE - LOG_DEBUG("Finished building frames. numframes: %d", numframes); + LOG_DEBUG("Finished build frames. numframes: %d", numframes); ui->setFrames(normalFrames, numframes); ui->enableAllIndicators(); @@ -2175,13 +2184,13 @@ void Screen::dismissCurrentFrame() bool dismissed = false; if (currentFrame == framesetInfo.positions.textMessage && devicestate.has_rx_text_message) { - LOG_INFO("Dismissing Text Message"); + LOG_INFO("Dismiss Text Message"); devicestate.has_rx_text_message = false; dismissed = true; } else if (currentFrame == framesetInfo.positions.waypoint && devicestate.has_rx_waypoint) { - LOG_DEBUG("Dismissing Waypoint"); + LOG_DEBUG("Dismiss Waypoint"); devicestate.has_rx_waypoint = false; dismissed = true; } @@ -2193,7 +2202,7 @@ void Screen::dismissCurrentFrame() void Screen::handleStartFirmwareUpdateScreen() { - LOG_DEBUG("showing firmware screen"); + LOG_DEBUG("Show firmware screen"); showingNormalScreen = false; EINK_ADD_FRAMEFLAG(dispdev, DEMAND_FAST); // E-Ink: Explicitly use fast-refresh for next frame @@ -2242,24 +2251,24 @@ void Screen::decreaseBrightness() /* TO DO: add little popup in center of screen saying what brightness level it is set to*/ } -void Screen::setFunctionSymbal(std::string sym) +void Screen::setFunctionSymbol(std::string sym) { - if (std::find(functionSymbals.begin(), functionSymbals.end(), sym) == functionSymbals.end()) { - functionSymbals.push_back(sym); - functionSymbalString = ""; - for (auto symbol : functionSymbals) { - functionSymbalString = symbol + " " + functionSymbalString; + if (std::find(functionSymbol.begin(), functionSymbol.end(), sym) == functionSymbol.end()) { + functionSymbol.push_back(sym); + functionSymbolString = ""; + for (auto symbol : functionSymbol) { + functionSymbolString = symbol + " " + functionSymbolString; } setFastFramerate(); } } -void Screen::removeFunctionSymbal(std::string sym) +void Screen::removeFunctionSymbol(std::string sym) { - functionSymbals.erase(std::remove(functionSymbals.begin(), functionSymbals.end(), sym), functionSymbals.end()); - functionSymbalString = ""; - for (auto symbol : functionSymbals) { - functionSymbalString = symbol + " " + functionSymbalString; + functionSymbol.erase(std::remove(functionSymbol.begin(), functionSymbol.end(), sym), functionSymbol.end()); + functionSymbolString = ""; + for (auto symbol : functionSymbol) { + functionSymbolString = symbol + " " + functionSymbolString; } setFastFramerate(); } @@ -2674,7 +2683,7 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event) if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET) setFrames(FOCUS_MODULE); - // Regenerate the frameset, while attempting to maintain focus on the current frame + // Regenerate the frameset, while Attempt to maintain focus on the current frame else if (event->action == UIFrameEvent::Action::REGENERATE_FRAMESET_BACKGROUND) setFrames(FOCUS_PRESERVE); @@ -2689,7 +2698,7 @@ int Screen::handleUIFrameEvent(const UIFrameEvent *event) int Screen::handleInputEvent(const InputEvent *event) { -#ifdef T_WATCH_S3 +#if defined(DISPLAY_CLOCK_FRAME) // For the T-Watch, intercept touches to the 'toggle digital/analog watch face' button uint8_t watchFaceFrame = error_code ? 1 : 0; diff --git a/src/graphics/Screen.h b/src/graphics/Screen.h index b2e6e905b..3cb39e8ec 100644 --- a/src/graphics/Screen.h +++ b/src/graphics/Screen.h @@ -24,8 +24,8 @@ class Screen void startFirmwareUpdateScreen() {} void increaseBrightness() {} void decreaseBrightness() {} - void setFunctionSymbal(std::string) {} - void removeFunctionSymbal(std::string) {} + void setFunctionSymbol(std::string) {} + void removeFunctionSymbol(std::string) {} void startAlert(const char *) {} void endAlert() {} }; @@ -282,8 +282,8 @@ class Screen : public concurrency::OSThread void increaseBrightness(); void decreaseBrightness(); - void setFunctionSymbal(std::string sym); - void removeFunctionSymbal(std::string sym); + void setFunctionSymbol(std::string sym); + void removeFunctionSymbol(std::string sym); /// Stops showing the boot screen. void stopBootScreen() { enqueueCmd(ScreenCmd{.cmd = Cmd::STOP_BOOT_SCREEN}); } @@ -327,10 +327,15 @@ class Screen : public concurrency::OSThread SKIPREST = false; return (uint8_t)ch; } + + case 0xC3: { + SKIPREST = false; + return (uint8_t)(ch | 0xC0); + } } // We want to strip out prefix chars for two-byte char formats - if (ch == 0xC2) + if (ch == 0xC2 || ch == 0xC3) return (uint8_t)0; #if defined(OLED_PL) @@ -422,6 +427,86 @@ class Screen : public concurrency::OSThread if (ch == 0xC2 || ch == 0xC3 || ch == 0x82 || ch == 0xD0 || ch == 0xD1) return (uint8_t)0; +#endif + +#if defined(OLED_CS) + + switch (last) { + case 0xC2: { + SKIPREST = false; + return (uint8_t)ch; + } + + case 0xC3: { + SKIPREST = false; + return (uint8_t)(ch | 0xC0); + } + + case 0xC4: { + SKIPREST = false; + if (ch == 140) + return (uint8_t)(129); // Č + if (ch == 141) + return (uint8_t)(138); // č + if (ch == 142) + return (uint8_t)(130); // Ď + if (ch == 143) + return (uint8_t)(139); // ď + if (ch == 154) + return (uint8_t)(131); // Ě + if (ch == 155) + return (uint8_t)(140); // ě + // Slovak specific glyphs + if (ch == 185) + return (uint8_t)(147); // Ĺ + if (ch == 186) + return (uint8_t)(148); // ĺ + if (ch == 189) + return (uint8_t)(149); // Ľ + if (ch == 190) + return (uint8_t)(150); // ľ + break; + } + + case 0xC5: { + SKIPREST = false; + if (ch == 135) + return (uint8_t)(132); // Ň + if (ch == 136) + return (uint8_t)(141); // ň + if (ch == 152) + return (uint8_t)(133); // Ř + if (ch == 153) + return (uint8_t)(142); // ř + if (ch == 160) + return (uint8_t)(134); // Š + if (ch == 161) + return (uint8_t)(143); // š + if (ch == 164) + return (uint8_t)(135); // Ť + if (ch == 165) + return (uint8_t)(144); // ť + if (ch == 174) + return (uint8_t)(136); // Ů + if (ch == 175) + return (uint8_t)(145); // ů + if (ch == 189) + return (uint8_t)(137); // Ž + if (ch == 190) + return (uint8_t)(146); // ž + // Slovak specific glyphs + if (ch == 148) + return (uint8_t)(151); // Ŕ + if (ch == 149) + return (uint8_t)(152); // ŕ + break; + } + } + + // We want to strip out prefix chars for two-byte char formats + if (ch == 0xC2 || ch == 0xC3 || ch == 0xC4 || ch == 0xC5) + return (uint8_t)0; + #endif // If we already returned an unconvertable-character symbol for this unconvertable-character sequence, return NULs for the @@ -549,7 +634,7 @@ class Screen : public concurrency::OSThread static void drawDebugInfoWiFiTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y); -#ifdef T_WATCH_S3 +#if defined(DISPLAY_CLOCK_FRAME) static void drawAnalogClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y); static void drawDigitalClockFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y); diff --git a/src/graphics/ScreenFonts.h b/src/graphics/ScreenFonts.h index c9ce961fa..81eb717cd 100644 --- a/src/graphics/ScreenFonts.h +++ b/src/graphics/ScreenFonts.h @@ -12,6 +12,10 @@ #include "graphics/fonts/OLEDDisplayFontsUA.h" #endif +#ifdef OLED_CS +#include "graphics/fonts/OLEDDisplayFontsCS.h" +#endif + #if (defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7701_CS) || defined(ST7735_CS) || \ defined(ST7789_CS) || defined(USE_ST7789) || defined(HX8357_CS)) && \ !defined(DISPLAY_FORCE_SMALL_FONTS) @@ -27,14 +31,34 @@ #define FONT_SMALL ArialMT_Plain_10_RU #else #ifdef OLED_UA -#define FONT_SMALL ArialMT_Plain_10_UA +#define FONT_SMALL ArialMT_Plain_10_UA // Height: 13 +#else +#ifdef OLED_CS +#define FONT_SMALL ArialMT_Plain_10_CS #else #define FONT_SMALL ArialMT_Plain_10 // Height: 13 #endif #endif #endif +#endif +#ifdef OLED_UA +#define FONT_MEDIUM ArialMT_Plain_16_UA // Height: 19 +#else +#ifdef OLED_CS +#define FONT_MEDIUM ArialMT_Plain_16_CS +#else #define FONT_MEDIUM ArialMT_Plain_16 // Height: 19 -#define FONT_LARGE ArialMT_Plain_24 // Height: 28 +#endif +#endif +#ifdef OLED_UA +#define FONT_LARGE ArialMT_Plain_24_UA // Height: 28 +#else +#ifdef OLED_CS +#define FONT_LARGE ArialMT_Plain_24_CS // Height: 28 +#else +#define FONT_LARGE ArialMT_Plain_24 // Height: 28 +#endif +#endif #endif #define _fontHeight(font) ((font)[1] + 1) // height is position 1 diff --git a/src/graphics/TFTDisplay.cpp b/src/graphics/TFTDisplay.cpp index 3ba847c23..4f2af670b 100644 --- a/src/graphics/TFTDisplay.cpp +++ b/src/graphics/TFTDisplay.cpp @@ -347,7 +347,7 @@ static LGFX *tft = nullptr; #include // Graphics and font library for ILI9342 driver chip static TFT_eSPI *tft = nullptr; // Invoke library, pins defined in User_Setup.h -#elif ARCH_PORTDUINO && HAS_SCREEN != 0 +#elif ARCH_PORTDUINO && HAS_SCREEN != 0 && !HAS_TFT #include // Graphics and font library for ST7735 driver chip class LGFX : public lgfx::LGFX_Device @@ -823,7 +823,7 @@ void TFTDisplay::setDetected(uint8_t detected) bool TFTDisplay::connect() { concurrency::LockGuard g(spiLock); - LOG_INFO("Doing TFT init"); + LOG_INFO("Do TFT init"); #ifdef RAK14014 tft = new TFT_eSPI; #else diff --git a/src/graphics/fonts/OLEDDisplayFontsCS.cpp b/src/graphics/fonts/OLEDDisplayFontsCS.cpp new file mode 100644 index 000000000..5c17e9177 --- /dev/null +++ b/src/graphics/fonts/OLEDDisplayFontsCS.cpp @@ -0,0 +1,1863 @@ +#include "OLEDDisplayFontsCS.h" + +// Font generated or edited with the glyphEditor +const uint8_t ArialMT_Plain_10_CS[] PROGMEM = { + 0x0A, // Width: 10 + 0x0D, // Height: 13 + 0x20, // First char: 32 + 0xE0, // Number of chars: 224 + // Jump Table: + 0xFF, 0xFF, 0x00, 0x0A, // 32 + 0x00, 0x00, 0x04, 0x03, // 33 + 0x00, 0x04, 0x05, 0x04, // 34 + 0x00, 0x09, 0x09, 0x06, // 35 + 0x00, 0x12, 0x0A, 0x06, // 36 + 0x00, 0x1C, 0x10, 0x09, // 37 + 0x00, 0x2C, 0x0E, 0x08, // 38 + 0x00, 0x3A, 0x01, 0x02, // 39 + 0x00, 0x3B, 0x06, 0x04, // 40 + 0x00, 0x41, 0x06, 0x04, // 41 + 0x00, 0x47, 0x05, 0x04, // 42 + 0x00, 0x4C, 0x09, 0x06, // 43 + 0x00, 0x55, 0x04, 0x03, // 44 + 0x00, 0x59, 0x03, 0x03, // 45 + 0x00, 0x5C, 0x04, 0x03, // 46 + 0x00, 0x60, 0x05, 0x04, // 47 + 0x00, 0x65, 0x0A, 0x06, // 48 + 0x00, 0x6F, 0x08, 0x05, // 49 + 0x00, 0x77, 0x0A, 0x06, // 50 + 0x00, 0x81, 0x0A, 0x06, // 51 + 0x00, 0x8B, 0x0B, 0x07, // 52 + 0x00, 0x96, 0x0A, 0x06, // 53 + 0x00, 0xA0, 0x0A, 0x06, // 54 + 0x00, 0xAA, 0x09, 0x06, // 55 + 0x00, 0xB3, 0x0A, 0x06, // 56 + 0x00, 0xBD, 0x0A, 0x06, // 57 + 0x00, 0xC7, 0x04, 0x03, // 58 + 0x00, 0xCB, 0x04, 0x03, // 59 + 0x00, 0xCF, 0x0A, 0x06, // 60 + 0x00, 0xD9, 0x09, 0x06, // 61 + 0x00, 0xE2, 0x09, 0x06, // 62 + 0x00, 0xEB, 0x0B, 0x07, // 63 + 0x00, 0xF6, 0x14, 0x0B, // 64 + 0x01, 0x0A, 0x0E, 0x08, // 65 + 0x01, 0x18, 0x0C, 0x07, // 66 + 0x01, 0x24, 0x0C, 0x07, // 67 + 0x01, 0x30, 0x0B, 0x07, // 68 + 0x01, 0x3B, 0x0C, 0x07, // 69 + 0x01, 0x47, 0x09, 0x06, // 70 + 0x01, 0x50, 0x0D, 0x08, // 71 + 0x01, 0x5D, 0x0C, 0x07, // 72 + 0x01, 0x69, 0x04, 0x03, // 73 + 0x01, 0x6D, 0x08, 0x05, // 74 + 0x01, 0x75, 0x0E, 0x08, // 75 + 0x01, 0x83, 0x0C, 0x07, // 76 + 0x01, 0x8F, 0x10, 0x09, // 77 + 0x01, 0x9F, 0x0C, 0x07, // 78 + 0x01, 0xAB, 0x0E, 0x08, // 79 + 0x01, 0xB9, 0x0B, 0x07, // 80 + 0x01, 0xC4, 0x0E, 0x08, // 81 + 0x01, 0xD2, 0x0C, 0x07, // 82 + 0x01, 0xDE, 0x0C, 0x07, // 83 + 0x01, 0xEA, 0x0B, 0x07, // 84 + 0x01, 0xF5, 0x0C, 0x07, // 85 + 0x02, 0x01, 0x0D, 0x08, // 86 + 0x02, 0x0E, 0x11, 0x0A, // 87 + 0x02, 0x1F, 0x0E, 0x08, // 88 + 0x02, 0x2D, 0x0D, 0x08, // 89 + 0x02, 0x3A, 0x0C, 0x07, // 90 + 0x02, 0x46, 0x06, 0x04, // 91 + 0x02, 0x4C, 0x06, 0x04, // 92 + 0x02, 0x52, 0x04, 0x03, // 93 + 0x02, 0x56, 0x09, 0x06, // 94 + 0x02, 0x5F, 0x0C, 0x07, // 95 + 0x02, 0x6B, 0x03, 0x03, // 96 + 0x02, 0x6E, 0x0A, 0x06, // 97 + 0x02, 0x78, 0x0A, 0x06, // 98 + 0x02, 0x82, 0x0A, 0x06, // 99 + 0x02, 0x8C, 0x0A, 0x06, // 100 + 0x02, 0x96, 0x0A, 0x06, // 101 + 0x02, 0xA0, 0x05, 0x04, // 102 + 0x02, 0xA5, 0x0A, 0x06, // 103 + 0x02, 0xAF, 0x0A, 0x06, // 104 + 0x02, 0xB9, 0x04, 0x03, // 105 + 0x02, 0xBD, 0x04, 0x03, // 106 + 0x02, 0xC1, 0x08, 0x05, // 107 + 0x02, 0xC9, 0x04, 0x03, // 108 + 0x02, 0xCD, 0x10, 0x09, // 109 + 0x02, 0xDD, 0x0A, 0x06, // 110 + 0x02, 0xE7, 0x0A, 0x06, // 111 + 0x02, 0xF1, 0x0A, 0x06, // 112 + 0x02, 0xFB, 0x0A, 0x06, // 113 + 0x03, 0x05, 0x05, 0x04, // 114 + 0x03, 0x0A, 0x08, 0x05, // 115 + 0x03, 0x12, 0x06, 0x04, // 116 + 0x03, 0x18, 0x0A, 0x06, // 117 + 0x03, 0x22, 0x09, 0x06, // 118 + 0x03, 0x2B, 0x0E, 0x08, // 119 + 0x03, 0x39, 0x0A, 0x06, // 120 + 0x03, 0x43, 0x09, 0x06, // 121 + 0x03, 0x4C, 0x0A, 0x06, // 122 + 0x03, 0x56, 0x06, 0x04, // 123 + 0x03, 0x5C, 0x04, 0x03, // 124 + 0x03, 0x60, 0x05, 0x04, // 125 + 0x03, 0x65, 0x09, 0x06, // 126 + 0xFF, 0xFF, 0x00, 0x0A, // 127 + 0xFF, 0xFF, 0x00, 0x0A, // 128 + 0x03, 0x6E, 0x0C, 0x07, // 129 + 0x03, 0x7A, 0x0B, 0x07, // 130 + 0x03, 0x85, 0x0C, 0x07, // 131 + 0x03, 0x91, 0x0C, 0x07, // 132 + 0x03, 0x9D, 0x0C, 0x07, // 133 + 0x03, 0xA9, 0x0C, 0x07, // 134 + 0x03, 0xB5, 0x0B, 0x07, // 135 + 0x03, 0xC0, 0x0C, 0x07, // 136 + 0x03, 0xCC, 0x0C, 0x07, // 137 + 0x03, 0xD8, 0x0A, 0x06, // 138 + 0x03, 0xE2, 0x0D, 0x08, // 139 + 0x03, 0xEF, 0x0A, 0x06, // 140 + 0x03, 0xF9, 0x0A, 0x06, // 141 + 0x04, 0x03, 0x07, 0x05, // 142 + 0x04, 0x0A, 0x08, 0x05, // 143 + 0x04, 0x12, 0x07, 0x05, // 144 + 0x04, 0x19, 0x0A, 0x06, // 145 + 0x04, 0x23, 0x0A, 0x06, // 146 + 0x04, 0x2D, 0x0C, 0x07, // 147 + 0x04, 0x39, 0x05, 0x04, // 148 + 0x04, 0x3E, 0x0C, 0x07, // 149 + 0x04, 0x4A, 0x07, 0x05, // 150 + 0x04, 0x51, 0x0C, 0x07, // 151 + 0x04, 0x5D, 0x07, 0x05, // 152 + 0xFF, 0xFF, 0x00, 0x0A, // 153 + 0xFF, 0xFF, 0x00, 0x0A, // 154 + 0xFF, 0xFF, 0x00, 0x0A, // 155 + 0xFF, 0xFF, 0x00, 0x0A, // 156 + 0xFF, 0xFF, 0x00, 0x0A, // 157 + 0xFF, 0xFF, 0x00, 0x0A, // 158 + 0xFF, 0xFF, 0x00, 0x0A, // 159 + 0xFF, 0xFF, 0x00, 0x0A, // 160 + 0x04, 0x64, 0x04, 0x03, // 161 + 0x04, 0x68, 0x0A, 0x06, // 162 + 0x04, 0x72, 0x0C, 0x07, // 163 + 0x04, 0x7E, 0x0A, 0x06, // 164 + 0x04, 0x88, 0x0A, 0x06, // 165 + 0x04, 0x92, 0x04, 0x03, // 166 + 0x04, 0x96, 0x0A, 0x06, // 167 + 0x04, 0xA0, 0x05, 0x04, // 168 + 0x04, 0xA5, 0x0D, 0x08, // 169 + 0x04, 0xB2, 0x07, 0x05, // 170 + 0x04, 0xB9, 0x0A, 0x06, // 171 + 0x04, 0xC3, 0x09, 0x06, // 172 + 0x04, 0xCC, 0x03, 0x03, // 173 + 0x04, 0xCF, 0x0D, 0x08, // 174 + 0x04, 0xDC, 0x0B, 0x07, // 175 + 0x04, 0xE7, 0x07, 0x05, // 176 + 0x04, 0xEE, 0x0A, 0x06, // 177 + 0x04, 0xF8, 0x05, 0x04, // 178 + 0x04, 0xFD, 0x05, 0x04, // 179 + 0x05, 0x02, 0x05, 0x04, // 180 + 0x05, 0x07, 0x0A, 0x06, // 181 + 0x05, 0x11, 0x09, 0x06, // 182 + 0x05, 0x1A, 0x03, 0x03, // 183 + 0x05, 0x1D, 0x06, 0x04, // 184 + 0x05, 0x23, 0x05, 0x04, // 185 + 0x05, 0x28, 0x07, 0x05, // 186 + 0x05, 0x2F, 0x0A, 0x06, // 187 + 0x05, 0x39, 0x10, 0x09, // 188 + 0x05, 0x49, 0x10, 0x09, // 189 + 0x05, 0x59, 0x10, 0x09, // 190 + 0x05, 0x69, 0x0A, 0x06, // 191 + 0x05, 0x73, 0x0E, 0x08, // 192 + 0x05, 0x81, 0x0E, 0x08, // 193 + 0x05, 0x8F, 0x0E, 0x08, // 194 + 0x05, 0x9D, 0x0E, 0x08, // 195 + 0x05, 0xAB, 0x0E, 0x08, // 196 + 0x05, 0xB9, 0x0E, 0x08, // 197 + 0x05, 0xC7, 0x12, 0x0A, // 198 + 0x05, 0xD9, 0x0C, 0x07, // 199 + 0x05, 0xE5, 0x0C, 0x07, // 200 + 0x05, 0xF1, 0x0C, 0x07, // 201 + 0x05, 0xFD, 0x0C, 0x07, // 202 + 0x06, 0x09, 0x0C, 0x07, // 203 + 0x06, 0x15, 0x05, 0x04, // 204 + 0x06, 0x1A, 0x04, 0x03, // 205 + 0x06, 0x1E, 0x04, 0x03, // 206 + 0x06, 0x22, 0x05, 0x04, // 207 + 0x06, 0x27, 0x0B, 0x07, // 208 + 0x06, 0x32, 0x0C, 0x07, // 209 + 0x06, 0x3E, 0x0E, 0x08, // 210 + 0x06, 0x4C, 0x0E, 0x08, // 211 + 0x06, 0x5A, 0x0E, 0x08, // 212 + 0x06, 0x68, 0x0E, 0x08, // 213 + 0x06, 0x76, 0x0E, 0x08, // 214 + 0x06, 0x84, 0x0A, 0x06, // 215 + 0x06, 0x8E, 0x0D, 0x08, // 216 + 0x06, 0x9B, 0x0C, 0x07, // 217 + 0x06, 0xA7, 0x0C, 0x07, // 218 + 0x06, 0xB3, 0x0C, 0x07, // 219 + 0x06, 0xBF, 0x0C, 0x07, // 220 + 0x06, 0xCB, 0x0D, 0x08, // 221 + 0x06, 0xD8, 0x0B, 0x07, // 222 + 0x06, 0xE3, 0x0C, 0x07, // 223 + 0x06, 0xEF, 0x0A, 0x06, // 224 + 0x06, 0xF9, 0x0A, 0x06, // 225 + 0x07, 0x03, 0x0A, 0x06, // 226 + 0x07, 0x0D, 0x0A, 0x06, // 227 + 0x07, 0x17, 0x0A, 0x06, // 228 + 0x07, 0x21, 0x0A, 0x06, // 229 + 0x07, 0x2B, 0x10, 0x09, // 230 + 0x07, 0x3B, 0x0A, 0x06, // 231 + 0x07, 0x45, 0x0A, 0x06, // 232 + 0x07, 0x4F, 0x0A, 0x06, // 233 + 0x07, 0x59, 0x0A, 0x06, // 234 + 0x07, 0x63, 0x0A, 0x06, // 235 + 0x07, 0x6D, 0x05, 0x04, // 236 + 0x07, 0x72, 0x04, 0x03, // 237 + 0x07, 0x76, 0x05, 0x04, // 238 + 0x07, 0x7B, 0x05, 0x04, // 239 + 0x07, 0x80, 0x0A, 0x06, // 240 + 0x07, 0x8A, 0x0A, 0x06, // 241 + 0x07, 0x94, 0x0A, 0x06, // 242 + 0x07, 0x9E, 0x0A, 0x06, // 243 + 0x07, 0xA8, 0x0A, 0x06, // 244 + 0x07, 0xB2, 0x0A, 0x06, // 245 + 0x07, 0xBC, 0x0A, 0x06, // 246 + 0x07, 0xC6, 0x09, 0x06, // 247 + 0x07, 0xCF, 0x0A, 0x06, // 248 + 0x07, 0xD9, 0x0A, 0x06, // 249 + 0x07, 0xE3, 0x0A, 0x06, // 250 + 0x07, 0xED, 0x0A, 0x06, // 251 + 0x07, 0xF7, 0x0A, 0x06, // 252 + 0x08, 0x01, 0x09, 0x06, // 253 + 0x08, 0x0A, 0x0A, 0x06, // 254 + 0x08, 0x14, 0x09, 0x06, // 255 + // Font Data: + 0x00, 0x00, 0xF8, 0x02, // 33 + 0x38, 0x00, 0x00, 0x00, 0x38, // 34 + 0xA0, 0x03, 0xE0, 0x00, 0xB8, 0x03, 0xE0, 0x00, 0xB8, // 35 + 0x30, 0x01, 0x28, 0x02, 0xF8, 0x07, 0x48, 0x02, 0x90, 0x01, // 36 + 0x00, 0x00, 0x30, 0x00, 0x48, 0x00, 0x30, 0x03, 0xC0, 0x00, 0xB0, 0x01, 0x48, 0x02, 0x80, 0x01, // 37 + 0x80, 0x01, 0x50, 0x02, 0x68, 0x02, 0xA8, 0x02, 0x18, 0x01, 0x80, 0x03, 0x80, 0x02, // 38 + 0x38, // 39 + 0xE0, 0x03, 0x10, 0x04, 0x08, 0x08, // 40 + 0x08, 0x08, 0x10, 0x04, 0xE0, 0x03, // 41 + 0x28, 0x00, 0x18, 0x00, 0x28, // 42 + 0x40, 0x00, 0x40, 0x00, 0xF0, 0x01, 0x40, 0x00, 0x40, // 43 + 0x00, 0x00, 0x00, 0x06, // 44 + 0x80, 0x00, 0x80, // 45 + 0x00, 0x00, 0x00, 0x02, // 46 + 0x00, 0x03, 0xE0, 0x00, 0x18, // 47 + 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 48 + 0x00, 0x00, 0x20, 0x00, 0x10, 0x00, 0xF8, 0x03, // 49 + 0x10, 0x02, 0x08, 0x03, 0x88, 0x02, 0x48, 0x02, 0x30, 0x02, // 50 + 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 51 + 0xC0, 0x00, 0xA0, 0x00, 0x90, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x80, // 52 + 0x60, 0x01, 0x38, 0x02, 0x28, 0x02, 0x28, 0x02, 0xC8, 0x01, // 53 + 0xF0, 0x01, 0x28, 0x02, 0x28, 0x02, 0x28, 0x02, 0xD0, 0x01, // 54 + 0x08, 0x00, 0x08, 0x03, 0xC8, 0x00, 0x38, 0x00, 0x08, // 55 + 0xB0, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 56 + 0x70, 0x01, 0x88, 0x02, 0x88, 0x02, 0x88, 0x02, 0xF0, 0x01, // 57 + 0x00, 0x00, 0x20, 0x02, // 58 + 0x00, 0x00, 0x20, 0x06, // 59 + 0x00, 0x00, 0x40, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x10, 0x01, // 60 + 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0xA0, // 61 + 0x00, 0x00, 0x10, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0x40, // 62 + 0x10, 0x00, 0x08, 0x00, 0x08, 0x00, 0xC8, 0x02, 0x48, 0x00, 0x30, // 63 + 0x00, 0x00, 0xC0, 0x03, 0x30, 0x04, 0xD0, 0x09, 0x28, 0x0A, 0x28, 0x0A, 0xC8, 0x0B, 0x68, 0x0A, 0x10, 0x05, 0xE0, 0x04, // 64 + 0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x88, 0x00, 0xB0, 0x00, 0xC0, 0x01, 0x00, 0x02, // 65 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01, // 66 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, // 67 + 0x00, 0x00, 0xF8, 0x03, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, 0xE0, // 68 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, // 69 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x08, // 70 + 0x00, 0x00, 0xE0, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x50, 0x01, 0xC0, // 71 + 0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 72 + 0x00, 0x00, 0xF8, 0x03, // 73 + 0x00, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01, // 74 + 0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02, // 75 + 0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, // 76 + 0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x30, 0x00, 0xF8, 0x03, // 77 + 0x00, 0x00, 0xF8, 0x03, 0x30, 0x00, 0x40, 0x00, 0x80, 0x01, 0xF8, 0x03, // 78 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 79 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 80 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x03, 0x08, 0x03, 0xF0, 0x02, // 81 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0xC8, 0x00, 0x30, 0x03, // 82 + 0x00, 0x00, 0x30, 0x01, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x90, 0x01, // 83 + 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, // 84 + 0x00, 0x00, 0xF8, 0x01, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x01, // 85 + 0x08, 0x00, 0x70, 0x00, 0x80, 0x01, 0x00, 0x02, 0x80, 0x01, 0x70, 0x00, 0x08, // 86 + 0x18, 0x00, 0xE0, 0x01, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0xF0, 0x01, 0x00, 0x02, 0xE0, 0x01, 0x18, // 87 + 0x00, 0x02, 0x08, 0x01, 0x90, 0x00, 0x60, 0x00, 0x90, 0x00, 0x08, 0x01, 0x00, 0x02, // 88 + 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC0, 0x03, 0x20, 0x00, 0x10, 0x00, 0x08, // 89 + 0x08, 0x03, 0x88, 0x02, 0xC8, 0x02, 0x68, 0x02, 0x38, 0x02, 0x18, 0x02, // 90 + 0x00, 0x00, 0xF8, 0x0F, 0x08, 0x08, // 91 + 0x18, 0x00, 0xE0, 0x00, 0x00, 0x03, // 92 + 0x08, 0x08, 0xF8, 0x0F, // 93 + 0x40, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x40, // 94 + 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x08, // 95 + 0x08, 0x00, 0x10, // 96 + 0x00, 0x00, 0x00, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x03, // 97 + 0x00, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 98 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01, // 99 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03, // 100 + 0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02, // 101 + 0x20, 0x00, 0xF0, 0x03, 0x28, // 102 + 0x00, 0x00, 0xC0, 0x05, 0x20, 0x0A, 0x20, 0x0A, 0xE0, 0x07, // 103 + 0x00, 0x00, 0xF8, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 104 + 0x00, 0x00, 0xE8, 0x03, // 105 + 0x00, 0x08, 0xE8, 0x07, // 106 + 0xF8, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, // 107 + 0x00, 0x00, 0xF8, 0x03, // 108 + 0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 109 + 0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xC0, 0x03, // 110 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 111 + 0x00, 0x00, 0xE0, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 112 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xE0, 0x0F, // 113 + 0x00, 0x00, 0xE0, 0x03, 0x20, // 114 + 0x40, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x20, 0x01, // 115 + 0x20, 0x00, 0xF8, 0x03, 0x20, 0x02, // 116 + 0x00, 0x00, 0xE0, 0x01, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, // 117 + 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, // 118 + 0xE0, 0x01, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xC0, 0x01, 0x00, 0x02, 0xE0, 0x01, // 119 + 0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 120 + 0x20, 0x00, 0xC0, 0x09, 0x00, 0x06, 0xC0, 0x01, 0x20, // 121 + 0x20, 0x02, 0x20, 0x03, 0xA0, 0x02, 0x60, 0x02, 0x20, 0x02, // 122 + 0x80, 0x00, 0x78, 0x0F, 0x08, 0x08, // 123 + 0x00, 0x00, 0xF8, 0x0F, // 124 + 0x08, 0x08, 0x78, 0x0F, 0x80, // 125 + 0xC0, 0x00, 0x40, 0x00, 0xC0, 0x00, 0x80, 0x00, 0xC0, // 126 + 0x00, 0x00, 0xF0, 0x01, 0x09, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x10, 0x01, // 129 + 0x00, 0x00, 0xF8, 0x03, 0x09, 0x02, 0x0A, 0x02, 0x11, 0x01, 0xE0, // 130 + 0x00, 0x00, 0xF8, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x48, 0x02, // 131 + 0x00, 0x00, 0xF8, 0x03, 0x31, 0x00, 0x42, 0x00, 0x81, 0x01, 0xF8, 0x03, // 132 + 0x00, 0x00, 0xF8, 0x03, 0x49, 0x00, 0x4A, 0x00, 0xC9, 0x00, 0x30, 0x03, // 133 + 0x00, 0x00, 0x30, 0x01, 0x49, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x90, 0x01, // 134 + 0x00, 0x00, 0x08, 0x00, 0x09, 0x00, 0xFA, 0x03, 0x09, 0x00, 0x08, // 135 + 0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x05, 0x02, 0x02, 0x02, 0xF8, 0x01, // 136 + 0x08, 0x03, 0x88, 0x02, 0xC9, 0x02, 0x6A, 0x02, 0x39, 0x02, 0x18, 0x02, // 137 + 0x00, 0x00, 0xC0, 0x01, 0x24, 0x02, 0x28, 0x02, 0x44, 0x01, // 138 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xF8, 0x03, 0x00, 0x00, 0x18, // 139 + 0x00, 0x00, 0xC0, 0x01, 0xA4, 0x02, 0xA8, 0x02, 0xC4, 0x02, // 140 + 0x00, 0x00, 0xE0, 0x03, 0x24, 0x00, 0x28, 0x00, 0xC4, 0x03, // 141 + 0x00, 0x00, 0xE4, 0x03, 0x28, 0x00, 0x04, // 142 + 0x40, 0x02, 0xA4, 0x02, 0xA8, 0x02, 0x24, 0x01, // 143 + 0x20, 0x00, 0xF8, 0x03, 0x20, 0x02, 0x18, // 144 + 0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x14, 0x02, 0xE8, 0x03, // 145 + 0x20, 0x02, 0x24, 0x03, 0xA8, 0x02, 0x64, 0x02, 0x20, 0x02, // 146 + 0x00, 0x00, 0xFA, 0x03, 0x01, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, // 147 + 0x00, 0x00, 0xFA, 0x03, 0x01, // 148 + 0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0x18, 0x02, 0x00, 0x02, // 149 + 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x18, // 150 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x4A, 0x00, 0xC9, 0x00, 0x30, 0x03, // 151 + 0x00, 0x00, 0xE0, 0x03, 0x28, 0x00, 0x04, // 152 + 0x00, 0x00, 0xA0, 0x0F, // 161 + 0x00, 0x00, 0xC0, 0x01, 0xA0, 0x0F, 0x78, 0x02, 0x40, 0x01, // 162 + 0x40, 0x02, 0x70, 0x03, 0xC8, 0x02, 0x48, 0x02, 0x08, 0x02, 0x10, 0x02, // 163 + 0x00, 0x00, 0xE0, 0x01, 0x20, 0x01, 0x20, 0x01, 0xE0, 0x01, // 164 + 0x48, 0x01, 0x70, 0x01, 0xC0, 0x03, 0x70, 0x01, 0x48, 0x01, // 165 + 0x00, 0x00, 0x38, 0x0F, // 166 + 0xD0, 0x04, 0x28, 0x09, 0x48, 0x09, 0x48, 0x0A, 0x90, 0x05, // 167 + 0x08, 0x00, 0x00, 0x00, 0x08, // 168 + 0xE0, 0x00, 0x10, 0x01, 0x48, 0x02, 0xA8, 0x02, 0xA8, 0x02, 0x10, 0x01, 0xE0, // 169 + 0x68, 0x00, 0x68, 0x00, 0x68, 0x00, 0x78, // 170 + 0x00, 0x00, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02, // 171 + 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, // 172 + 0x80, 0x00, 0x80, // 173 + 0xE0, 0x00, 0x10, 0x01, 0xE8, 0x02, 0x68, 0x02, 0xC8, 0x02, 0x10, 0x01, 0xE0, // 174 + 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, 0x00, 0x02, // 175 + 0x00, 0x00, 0x38, 0x00, 0x28, 0x00, 0x38, // 176 + 0x40, 0x02, 0x40, 0x02, 0xF0, 0x03, 0x40, 0x02, 0x40, 0x02, // 177 + 0x48, 0x00, 0x68, 0x00, 0x58, // 178 + 0x48, 0x00, 0x58, 0x00, 0x68, // 179 + 0x00, 0x00, 0x10, 0x00, 0x08, // 180 + 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, // 181 + 0x70, 0x00, 0xF8, 0x0F, 0x08, 0x00, 0xF8, 0x0F, 0x08, // 182 + 0x00, 0x00, 0x40, // 183 + 0x00, 0x00, 0x00, 0x14, 0x00, 0x18, // 184 + 0x00, 0x00, 0x10, 0x00, 0x78, // 185 + 0x30, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 186 + 0x00, 0x00, 0x40, 0x02, 0x80, 0x01, 0x40, 0x02, 0x80, 0x01, // 187 + 0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0xC0, 0x00, 0x20, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 188 + 0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02, // 189 + 0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 190 + 0x00, 0x00, 0x00, 0x06, 0x00, 0x09, 0xA0, 0x09, 0x00, 0x04, // 191 + 0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02, // 192 + 0x00, 0x02, 0xC0, 0x01, 0xB0, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02, // 193 + 0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x89, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02, // 194 + 0x00, 0x02, 0xC2, 0x01, 0xB1, 0x00, 0x8A, 0x00, 0xB1, 0x00, 0xC0, 0x01, 0x00, 0x02, // 195 + 0x00, 0x02, 0xC0, 0x01, 0xB2, 0x00, 0x88, 0x00, 0xB2, 0x00, 0xC0, 0x01, 0x00, 0x02, // 196 + 0x00, 0x02, 0xC0, 0x01, 0xBE, 0x00, 0x8A, 0x00, 0xBE, 0x00, 0xC0, 0x01, 0x00, 0x02, // 197 + 0x00, 0x03, 0xC0, 0x00, 0xE0, 0x00, 0x98, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, // 198 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x16, 0x08, 0x1A, 0x10, 0x01, // 199 + 0x00, 0x00, 0xF8, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02, // 200 + 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x4A, 0x02, 0x49, 0x02, 0x48, 0x02, // 201 + 0x00, 0x00, 0xFA, 0x03, 0x49, 0x02, 0x4A, 0x02, 0x48, 0x02, 0x48, 0x02, // 202 + 0x00, 0x00, 0xF8, 0x03, 0x4A, 0x02, 0x48, 0x02, 0x4A, 0x02, 0x48, 0x02, // 203 + 0x00, 0x00, 0xF9, 0x03, 0x02, // 204 + 0x02, 0x00, 0xF9, 0x03, // 205 + 0x01, 0x00, 0xFA, 0x03, // 206 + 0x02, 0x00, 0xF8, 0x03, 0x02, // 207 + 0x40, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x10, 0x01, 0xE0, // 208 + 0x00, 0x00, 0xFA, 0x03, 0x31, 0x00, 0x42, 0x00, 0x81, 0x01, 0xF8, 0x03, // 209 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01, // 210 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x08, 0x02, 0xF0, 0x01, // 211 + 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0xF0, 0x01, // 212 + 0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x09, 0x02, 0x0A, 0x02, 0x09, 0x02, 0xF0, 0x01, // 213 + 0x00, 0x00, 0xF0, 0x01, 0x0A, 0x02, 0x08, 0x02, 0x0A, 0x02, 0x08, 0x02, 0xF0, 0x01, // 214 + 0x10, 0x01, 0xA0, 0x00, 0xE0, 0x00, 0xA0, 0x00, 0x10, 0x01, // 215 + 0x00, 0x00, 0xF0, 0x02, 0x08, 0x03, 0xC8, 0x02, 0x28, 0x02, 0x18, 0x03, 0xE8, // 216 + 0x00, 0x00, 0xF8, 0x01, 0x01, 0x02, 0x02, 0x02, 0x00, 0x02, 0xF8, 0x01, // 217 + 0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x00, 0x02, 0xF8, 0x01, // 218 + 0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x01, 0x02, 0x02, 0x02, 0xF8, 0x01, // 219 + 0x00, 0x00, 0xF8, 0x01, 0x02, 0x02, 0x00, 0x02, 0x02, 0x02, 0xF8, 0x01, // 220 + 0x08, 0x00, 0x10, 0x00, 0x20, 0x00, 0xC2, 0x03, 0x21, 0x00, 0x10, 0x00, 0x08, // 221 + 0x00, 0x00, 0xF8, 0x03, 0x10, 0x01, 0x10, 0x01, 0x10, 0x01, 0xE0, // 222 + 0x00, 0x00, 0xF0, 0x03, 0x08, 0x01, 0x48, 0x02, 0xB0, 0x02, 0x80, 0x01, // 223 + 0x00, 0x00, 0x00, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE0, 0x03, // 224 + 0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE0, 0x03, // 225 + 0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA4, 0x02, 0xE8, 0x03, // 226 + 0x00, 0x00, 0x08, 0x03, 0xA4, 0x02, 0xA8, 0x02, 0xE4, 0x03, // 227 + 0x00, 0x00, 0x00, 0x03, 0xA8, 0x02, 0xA0, 0x02, 0xE8, 0x03, // 228 + 0x00, 0x00, 0x00, 0x03, 0xAE, 0x02, 0xAA, 0x02, 0xEE, 0x03, // 229 + 0x00, 0x00, 0x40, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x02, // 230 + 0x00, 0x00, 0xC0, 0x01, 0x20, 0x16, 0x20, 0x1A, 0x40, 0x01, // 231 + 0x00, 0x00, 0xC0, 0x01, 0xA4, 0x02, 0xA8, 0x02, 0xC0, 0x02, // 232 + 0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC0, 0x02, // 233 + 0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA4, 0x02, 0xC8, 0x02, // 234 + 0x00, 0x00, 0xC0, 0x01, 0xA8, 0x02, 0xA0, 0x02, 0xC8, 0x02, // 235 + 0x00, 0x00, 0xE4, 0x03, 0x08, // 236 + 0x08, 0x00, 0xE4, 0x03, // 237 + 0x08, 0x00, 0xE4, 0x03, 0x08, // 238 + 0x08, 0x00, 0xE0, 0x03, 0x08, // 239 + 0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x38, 0x02, 0xE0, 0x01, // 240 + 0x00, 0x00, 0xE8, 0x03, 0x24, 0x00, 0x28, 0x00, 0xC4, 0x03, // 241 + 0x00, 0x00, 0xC0, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC0, 0x01, // 242 + 0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC0, 0x01, // 243 + 0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x24, 0x02, 0xC8, 0x01, // 244 + 0x00, 0x00, 0xC8, 0x01, 0x24, 0x02, 0x28, 0x02, 0xC4, 0x01, // 245 + 0x00, 0x00, 0xC0, 0x01, 0x28, 0x02, 0x20, 0x02, 0xC8, 0x01, // 246 + 0x40, 0x00, 0x40, 0x00, 0x50, 0x01, 0x40, 0x00, 0x40, // 247 + 0x00, 0x00, 0xC0, 0x02, 0xA0, 0x03, 0x60, 0x02, 0xA0, 0x01, // 248 + 0x00, 0x00, 0xE0, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03, // 249 + 0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x04, 0x02, 0xE0, 0x03, // 250 + 0x00, 0x00, 0xE8, 0x01, 0x04, 0x02, 0x08, 0x02, 0xE0, 0x03, // 251 + 0x00, 0x00, 0xE0, 0x01, 0x08, 0x02, 0x00, 0x02, 0xE8, 0x03, // 252 + 0x20, 0x00, 0xC0, 0x09, 0x08, 0x06, 0xC4, 0x01, 0x20, // 253 + 0x00, 0x00, 0xF8, 0x0F, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 254 + 0x20, 0x00, 0xC8, 0x09, 0x00, 0x06, 0xC8, 0x01, 0x20, // 255 +}; + +const uint8_t ArialMT_Plain_16_CS[] PROGMEM = { + 0x10, // Width: 16 + 0x13, // Height: 19 + 0x20, // First char: 32 + 0xE0, // Number of chars: 224 + // Jump Table: + 0xFF, 0xFF, 0x00, 0x10, // 32 + 0x00, 0x00, 0x08, 0x04, // 33 + 0x00, 0x08, 0x0D, 0x06, // 34 + 0x00, 0x15, 0x1A, 0x0A, // 35 + 0x00, 0x2F, 0x17, 0x09, // 36 + 0x00, 0x46, 0x26, 0x0E, // 37 + 0x00, 0x6C, 0x1D, 0x0B, // 38 + 0x00, 0x89, 0x04, 0x03, // 39 + 0x00, 0x8D, 0x0C, 0x05, // 40 + 0x00, 0x99, 0x0B, 0x05, // 41 + 0x00, 0xA4, 0x0D, 0x06, // 42 + 0x00, 0xB1, 0x17, 0x09, // 43 + 0x00, 0xC8, 0x09, 0x04, // 44 + 0x00, 0xD1, 0x0B, 0x05, // 45 + 0x00, 0xDC, 0x08, 0x04, // 46 + 0x00, 0xE4, 0x0A, 0x05, // 47 + 0x00, 0xEE, 0x17, 0x09, // 48 + 0x01, 0x05, 0x11, 0x07, // 49 + 0x01, 0x16, 0x17, 0x09, // 50 + 0x01, 0x2D, 0x17, 0x09, // 51 + 0x01, 0x44, 0x17, 0x09, // 52 + 0x01, 0x5B, 0x17, 0x09, // 53 + 0x01, 0x72, 0x17, 0x09, // 54 + 0x01, 0x89, 0x16, 0x09, // 55 + 0x01, 0x9F, 0x17, 0x09, // 56 + 0x01, 0xB6, 0x17, 0x09, // 57 + 0x01, 0xCD, 0x05, 0x03, // 58 + 0x01, 0xD2, 0x06, 0x03, // 59 + 0x01, 0xD8, 0x17, 0x09, // 60 + 0x01, 0xEF, 0x17, 0x09, // 61 + 0x02, 0x06, 0x17, 0x09, // 62 + 0x02, 0x1D, 0x16, 0x09, // 63 + 0x02, 0x33, 0x2F, 0x11, // 64 + 0x02, 0x62, 0x1D, 0x0B, // 65 + 0x02, 0x7F, 0x1D, 0x0B, // 66 + 0x02, 0x9C, 0x20, 0x0C, // 67 + 0x02, 0xBC, 0x20, 0x0C, // 68 + 0x02, 0xDC, 0x1D, 0x0B, // 69 + 0x02, 0xF9, 0x19, 0x0A, // 70 + 0x03, 0x12, 0x20, 0x0C, // 71 + 0x03, 0x32, 0x1D, 0x0B, // 72 + 0x03, 0x4F, 0x05, 0x03, // 73 + 0x03, 0x54, 0x14, 0x08, // 74 + 0x03, 0x68, 0x1D, 0x0B, // 75 + 0x03, 0x85, 0x17, 0x09, // 76 + 0x03, 0x9C, 0x23, 0x0D, // 77 + 0x03, 0xBF, 0x1D, 0x0B, // 78 + 0x03, 0xDC, 0x20, 0x0C, // 79 + 0x03, 0xFC, 0x1C, 0x0B, // 80 + 0x04, 0x18, 0x20, 0x0C, // 81 + 0x04, 0x38, 0x1D, 0x0B, // 82 + 0x04, 0x55, 0x1D, 0x0B, // 83 + 0x04, 0x72, 0x19, 0x0A, // 84 + 0x04, 0x8B, 0x1D, 0x0B, // 85 + 0x04, 0xA8, 0x1C, 0x0B, // 86 + 0x04, 0xC4, 0x2B, 0x10, // 87 + 0x04, 0xEF, 0x20, 0x0C, // 88 + 0x05, 0x0F, 0x19, 0x0A, // 89 + 0x05, 0x28, 0x1A, 0x0A, // 90 + 0x05, 0x42, 0x0C, 0x05, // 91 + 0x05, 0x4E, 0x0B, 0x05, // 92 + 0x05, 0x59, 0x09, 0x04, // 93 + 0x05, 0x62, 0x14, 0x08, // 94 + 0x05, 0x76, 0x1B, 0x0A, // 95 + 0x05, 0x91, 0x07, 0x04, // 96 + 0x05, 0x98, 0x17, 0x09, // 97 + 0x05, 0xAF, 0x17, 0x09, // 98 + 0x05, 0xC6, 0x14, 0x08, // 99 + 0x05, 0xDA, 0x17, 0x09, // 100 + 0x05, 0xF1, 0x17, 0x09, // 101 + 0x06, 0x08, 0x0A, 0x05, // 102 + 0x06, 0x12, 0x17, 0x09, // 103 + 0x06, 0x29, 0x14, 0x08, // 104 + 0x06, 0x3D, 0x05, 0x03, // 105 + 0x06, 0x42, 0x06, 0x03, // 106 + 0x06, 0x48, 0x17, 0x09, // 107 + 0x06, 0x5F, 0x05, 0x03, // 108 + 0x06, 0x64, 0x23, 0x0D, // 109 + 0x06, 0x87, 0x14, 0x08, // 110 + 0x06, 0x9B, 0x17, 0x09, // 111 + 0x06, 0xB2, 0x17, 0x09, // 112 + 0x06, 0xC9, 0x18, 0x09, // 113 + 0x06, 0xE1, 0x0D, 0x06, // 114 + 0x06, 0xEE, 0x14, 0x08, // 115 + 0x07, 0x02, 0x0B, 0x05, // 116 + 0x07, 0x0D, 0x14, 0x08, // 117 + 0x07, 0x21, 0x13, 0x08, // 118 + 0x07, 0x34, 0x1F, 0x0C, // 119 + 0x07, 0x53, 0x14, 0x08, // 120 + 0x07, 0x67, 0x13, 0x08, // 121 + 0x07, 0x7A, 0x14, 0x08, // 122 + 0x07, 0x8E, 0x0F, 0x06, // 123 + 0x07, 0x9D, 0x06, 0x03, // 124 + 0x07, 0xA3, 0x0E, 0x06, // 125 + 0x07, 0xB1, 0x17, 0x09, // 126 + 0xFF, 0xFF, 0x00, 0x10, // 127 + 0xFF, 0xFF, 0x00, 0x10, // 128 + 0x07, 0xC8, 0x20, 0x0C, // 129 + 0x07, 0xE8, 0x20, 0x0C, // 130 + 0x08, 0x08, 0x1D, 0x0B, // 131 + 0x08, 0x25, 0x1D, 0x0B, // 132 + 0x08, 0x42, 0x1D, 0x0B, // 133 + 0x08, 0x5F, 0x1D, 0x0B, // 134 + 0x08, 0x7C, 0x19, 0x0A, // 135 + 0x08, 0x95, 0x1D, 0x0B, // 136 + 0x08, 0xB2, 0x1A, 0x0A, // 137 + 0x08, 0xCC, 0x14, 0x08, // 138 + 0x08, 0xE0, 0x1C, 0x0B, // 139 + 0x08, 0xFC, 0x17, 0x09, // 140 + 0x09, 0x13, 0x14, 0x08, // 141 + 0x09, 0x27, 0x0D, 0x06, // 142 + 0x09, 0x34, 0x14, 0x08, // 143 + 0x09, 0x48, 0x10, 0x07, // 144 + 0x09, 0x58, 0x14, 0x08, // 145 + 0x09, 0x6C, 0x14, 0x08, // 146 + 0x09, 0x80, 0x17, 0x09, // 147 + 0x09, 0x97, 0x07, 0x04, // 148 + 0x09, 0x9E, 0x17, 0x09, // 149 + 0x09, 0xB5, 0x0A, 0x05, // 150 + 0x09, 0xBF, 0x1D, 0x0B, // 151 + 0x09, 0xDC, 0x0D, 0x06, // 152 + 0xFF, 0xFF, 0x00, 0x10, // 153 + 0xFF, 0xFF, 0x00, 0x10, // 154 + 0xFF, 0xFF, 0x00, 0x10, // 155 + 0xFF, 0xFF, 0x00, 0x10, // 156 + 0xFF, 0xFF, 0x00, 0x10, // 157 + 0xFF, 0xFF, 0x00, 0x10, // 158 + 0xFF, 0xFF, 0x00, 0x10, // 159 + 0xFF, 0xFF, 0x00, 0x10, // 160 + 0x09, 0xE9, 0x09, 0x04, // 161 + 0x09, 0xF2, 0x17, 0x09, // 162 + 0x0A, 0x09, 0x17, 0x09, // 163 + 0x0A, 0x20, 0x14, 0x08, // 164 + 0x0A, 0x34, 0x1A, 0x0A, // 165 + 0x0A, 0x4E, 0x06, 0x03, // 166 + 0x0A, 0x54, 0x17, 0x09, // 167 + 0x0A, 0x6B, 0x07, 0x04, // 168 + 0x0A, 0x72, 0x23, 0x0D, // 169 + 0x0A, 0x95, 0x0E, 0x06, // 170 + 0x0A, 0xA3, 0x14, 0x08, // 171 + 0x0A, 0xB7, 0x17, 0x09, // 172 + 0x0A, 0xCE, 0x0B, 0x05, // 173 + 0x0A, 0xD9, 0x23, 0x0D, // 174 + 0x0A, 0xFC, 0x19, 0x0A, // 175 + 0x0B, 0x15, 0x0D, 0x06, // 176 + 0x0B, 0x22, 0x17, 0x09, // 177 + 0x0B, 0x39, 0x0E, 0x06, // 178 + 0x0B, 0x47, 0x0D, 0x06, // 179 + 0x0B, 0x54, 0x0A, 0x05, // 180 + 0x0B, 0x5E, 0x17, 0x09, // 181 + 0x0B, 0x75, 0x19, 0x0A, // 182 + 0x0B, 0x8E, 0x08, 0x04, // 183 + 0x0B, 0x96, 0x0C, 0x05, // 184 + 0x0B, 0xA2, 0x0B, 0x05, // 185 + 0x0B, 0xAD, 0x0D, 0x06, // 186 + 0x0B, 0xBA, 0x17, 0x09, // 187 + 0x0B, 0xD1, 0x26, 0x0E, // 188 + 0x0B, 0xF7, 0x26, 0x0E, // 189 + 0x0C, 0x1D, 0x26, 0x0E, // 190 + 0x0C, 0x43, 0x1A, 0x0A, // 191 + 0x0C, 0x5D, 0x1D, 0x0B, // 192 + 0x0C, 0x7A, 0x1D, 0x0B, // 193 + 0x0C, 0x97, 0x1D, 0x0B, // 194 + 0x0C, 0xB4, 0x1D, 0x0B, // 195 + 0x0C, 0xD1, 0x1D, 0x0B, // 196 + 0x0C, 0xEE, 0x1D, 0x0B, // 197 + 0x0D, 0x0B, 0x2C, 0x10, // 198 + 0x0D, 0x37, 0x20, 0x0C, // 199 + 0x0D, 0x57, 0x1D, 0x0B, // 200 + 0x0D, 0x74, 0x1D, 0x0B, // 201 + 0x0D, 0x91, 0x1D, 0x0B, // 202 + 0x0D, 0xAE, 0x1D, 0x0B, // 203 + 0x0D, 0xCB, 0x05, 0x03, // 204 + 0x0D, 0xD0, 0x07, 0x04, // 205 + 0x0D, 0xD7, 0x0A, 0x05, // 206 + 0x0D, 0xE1, 0x07, 0x04, // 207 + 0x0D, 0xE8, 0x20, 0x0C, // 208 + 0x0E, 0x08, 0x1D, 0x0B, // 209 + 0x0E, 0x25, 0x20, 0x0C, // 210 + 0x0E, 0x45, 0x20, 0x0C, // 211 + 0x0E, 0x65, 0x20, 0x0C, // 212 + 0x0E, 0x85, 0x20, 0x0C, // 213 + 0x0E, 0xA5, 0x20, 0x0C, // 214 + 0x0E, 0xC5, 0x17, 0x09, // 215 + 0x0E, 0xDC, 0x20, 0x0C, // 216 + 0x0E, 0xFC, 0x1D, 0x0B, // 217 + 0x0F, 0x19, 0x1D, 0x0B, // 218 + 0x0F, 0x36, 0x1D, 0x0B, // 219 + 0x0F, 0x53, 0x1D, 0x0B, // 220 + 0x0F, 0x70, 0x19, 0x0A, // 221 + 0x0F, 0x89, 0x1D, 0x0B, // 222 + 0x0F, 0xA6, 0x17, 0x09, // 223 + 0x0F, 0xBD, 0x17, 0x09, // 224 + 0x0F, 0xD4, 0x17, 0x09, // 225 + 0x0F, 0xEB, 0x17, 0x09, // 226 + 0x10, 0x02, 0x17, 0x09, // 227 + 0x10, 0x19, 0x17, 0x09, // 228 + 0x10, 0x30, 0x17, 0x09, // 229 + 0x10, 0x47, 0x29, 0x0F, // 230 + 0x10, 0x70, 0x14, 0x08, // 231 + 0x10, 0x84, 0x17, 0x09, // 232 + 0x10, 0x9B, 0x17, 0x09, // 233 + 0x10, 0xB2, 0x17, 0x09, // 234 + 0x10, 0xC9, 0x17, 0x09, // 235 + 0x10, 0xE0, 0x05, 0x03, // 236 + 0x10, 0xE5, 0x07, 0x04, // 237 + 0x10, 0xEC, 0x0A, 0x05, // 238 + 0x10, 0xF6, 0x07, 0x04, // 239 + 0x10, 0xFD, 0x17, 0x09, // 240 + 0x11, 0x14, 0x14, 0x08, // 241 + 0x11, 0x28, 0x17, 0x09, // 242 + 0x11, 0x3F, 0x17, 0x09, // 243 + 0x11, 0x56, 0x17, 0x09, // 244 + 0x11, 0x6D, 0x17, 0x09, // 245 + 0x11, 0x84, 0x17, 0x09, // 246 + 0x11, 0x9B, 0x17, 0x09, // 247 + 0x11, 0xB2, 0x17, 0x09, // 248 + 0x11, 0xC9, 0x14, 0x08, // 249 + 0x11, 0xDD, 0x14, 0x08, // 250 + 0x11, 0xF1, 0x14, 0x08, // 251 + 0x12, 0x05, 0x14, 0x08, // 252 + 0x12, 0x19, 0x13, 0x08, // 253 + 0x12, 0x2C, 0x17, 0x09, // 254 + 0x12, 0x43, 0x13, 0x08, // 255 + // Font Data: + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x5F, // 33 + 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, // 34 + 0x80, 0x08, 0x00, 0x80, 0x78, 0x00, 0xC0, 0x0F, 0x00, 0xB8, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x78, 0x00, 0xC0, 0x0F, 0x00, + 0xB8, 0x08, 0x00, 0x80, 0x08, // 35 + 0x00, 0x00, 0x00, 0xE0, 0x10, 0x00, 0x10, 0x21, 0x00, 0x08, 0x41, 0x00, 0xFC, 0xFF, 0x00, 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, + 0x20, 0x1C, // 36 + 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x08, 0x61, 0x00, 0xF0, 0x18, 0x00, 0x00, 0x06, 0x00, + 0xC0, 0x01, 0x00, 0x30, 0x3C, 0x00, 0x08, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x3C, // 37 + 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x70, 0x22, 0x00, 0x88, 0x41, 0x00, 0x08, 0x43, 0x00, 0x88, 0x44, 0x00, 0x70, 0x28, 0x00, + 0x00, 0x10, 0x00, 0x00, 0x28, 0x00, 0x00, 0x44, // 38 + 0x00, 0x00, 0x00, 0x78, // 39 + 0x00, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x70, 0xC0, 0x01, 0x08, 0x00, 0x02, // 40 + 0x00, 0x00, 0x00, 0x08, 0x00, 0x02, 0x70, 0xC0, 0x01, 0x80, 0x3F, // 41 + 0x10, 0x00, 0x00, 0xD0, 0x00, 0x00, 0x38, 0x00, 0x00, 0xD0, 0x00, 0x00, 0x10, // 42 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x02, // 43 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x01, // 44 + 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, // 45 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, // 46 + 0x00, 0x60, 0x00, 0x00, 0x1E, 0x00, 0xE0, 0x01, 0x00, 0x18, // 47 + 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, + 0xE0, 0x1F, // 48 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0x00, 0x10, 0x00, 0x00, 0xF8, 0x7F, // 49 + 0x00, 0x00, 0x00, 0x20, 0x40, 0x00, 0x10, 0x60, 0x00, 0x08, 0x50, 0x00, 0x08, 0x48, 0x00, 0x08, 0x44, 0x00, 0x10, 0x43, 0x00, + 0xE0, 0x40, // 50 + 0x00, 0x00, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x88, 0x41, 0x00, 0xF0, 0x22, 0x00, + 0x00, 0x1C, // 51 + 0x00, 0x0C, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x09, 0x00, 0xC0, 0x08, 0x00, 0x20, 0x08, 0x00, 0x10, 0x08, 0x00, 0xF8, 0x7F, 0x00, + 0x00, 0x08, // 52 + 0x00, 0x00, 0x00, 0xC0, 0x11, 0x00, 0xB8, 0x20, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x08, 0x21, 0x00, + 0x08, 0x1E, // 53 + 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x10, 0x21, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x10, 0x21, 0x00, + 0x20, 0x1E, // 54 + 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x78, 0x00, 0x08, 0x07, 0x00, 0xC8, 0x00, 0x00, 0x28, 0x00, 0x00, + 0x18, // 55 + 0x00, 0x00, 0x00, 0x60, 0x1C, 0x00, 0x90, 0x22, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x90, 0x22, 0x00, + 0x60, 0x1C, // 56 + 0x00, 0x00, 0x00, 0xE0, 0x11, 0x00, 0x10, 0x22, 0x00, 0x08, 0x44, 0x00, 0x08, 0x44, 0x00, 0x08, 0x44, 0x00, 0x10, 0x22, 0x00, + 0xE0, 0x1F, // 57 + 0x00, 0x00, 0x00, 0x40, 0x40, // 58 + 0x00, 0x00, 0x00, 0x40, 0xC0, 0x01, // 59 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x05, 0x00, 0x00, 0x05, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, + 0x40, 0x10, // 60 + 0x00, 0x00, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, + 0x80, 0x08, // 61 + 0x00, 0x00, 0x00, 0x40, 0x10, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x00, 0x05, 0x00, 0x00, 0x05, 0x00, + 0x00, 0x02, // 62 + 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x5C, 0x00, 0x08, 0x02, 0x00, 0x10, 0x01, 0x00, + 0xE0, // 63 + 0x00, 0x00, 0x00, 0x00, 0x3F, 0x00, 0xC0, 0x40, 0x00, 0x20, 0x80, 0x00, 0x10, 0x1E, 0x01, 0x10, 0x21, 0x01, 0x88, 0x40, 0x02, + 0x48, 0x40, 0x02, 0x48, 0x40, 0x02, 0x48, 0x20, 0x02, 0x88, 0x7C, 0x02, 0xC8, 0x43, 0x02, 0x10, 0x40, 0x02, 0x10, 0x20, 0x01, + 0x60, 0x10, 0x01, 0x80, 0x8F, // 64 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x70, 0x04, 0x00, 0x08, 0x04, 0x00, 0x70, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 65 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x90, 0x22, 0x00, 0x60, 0x1C, // 66 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 67 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 68 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 69 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x08, // 70 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x42, 0x00, + 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x12, 0x00, 0x00, 0x0E, // 71 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xF8, 0x7F, // 72 + 0x00, 0x00, 0x00, 0xF8, 0x7F, // 73 + 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x3F, // 74 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0x80, 0x03, 0x00, 0x40, 0x04, 0x00, + 0x20, 0x18, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, // 75 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, // 76 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x30, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, 0x7F, // 77 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x10, 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x18, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x7F, // 78 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 79 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x10, 0x01, 0x00, 0xE0, // 80 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x50, 0x00, + 0x08, 0x50, 0x00, 0x10, 0x20, 0x00, 0x20, 0x70, 0x00, 0xC0, 0x4F, // 81 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x06, 0x00, + 0x08, 0x1A, 0x00, 0x10, 0x21, 0x00, 0xE0, 0x40, // 82 + 0x00, 0x00, 0x00, 0x60, 0x10, 0x00, 0x90, 0x20, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x42, 0x00, + 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x1C, // 83 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 84 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 85 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x18, 0x00, 0x00, 0x60, 0x00, 0x00, 0x18, 0x00, + 0x00, 0x07, 0x00, 0xE0, 0x00, 0x00, 0x18, // 86 + 0x18, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x03, 0x00, 0x70, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x70, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1E, 0x00, 0xE0, 0x01, 0x00, + 0x18, // 87 + 0x00, 0x40, 0x00, 0x08, 0x20, 0x00, 0x10, 0x10, 0x00, 0x60, 0x0C, 0x00, 0x80, 0x02, 0x00, 0x00, 0x01, 0x00, 0x80, 0x02, 0x00, + 0x60, 0x0C, 0x00, 0x10, 0x10, 0x00, 0x08, 0x20, 0x00, 0x00, 0x40, // 88 + 0x08, 0x00, 0x00, 0x30, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x7E, 0x00, 0x80, 0x01, 0x00, 0x40, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x08, // 89 + 0x00, 0x40, 0x00, 0x08, 0x60, 0x00, 0x08, 0x58, 0x00, 0x08, 0x44, 0x00, 0x08, 0x43, 0x00, 0x88, 0x40, 0x00, 0x68, 0x40, 0x00, + 0x18, 0x40, 0x00, 0x08, 0x40, // 90 + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x03, 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, // 91 + 0x18, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x60, // 92 + 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, 0xF8, 0xFF, 0x03, // 93 + 0x00, 0x01, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00, 0x00, 0x08, 0x00, 0x00, 0x30, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x01, // 94 + 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, // 95 + 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x10, // 96 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 97 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 98 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, // 99 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0xF8, 0x7F, // 100 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 101 + 0x40, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x48, 0x00, 0x00, 0x48, // 102 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x01, 0x80, 0x20, 0x02, 0x40, 0x40, 0x02, 0x40, 0x40, 0x02, 0x40, 0x40, 0x02, 0x80, 0x20, 0x01, + 0xC0, 0xFF, // 103 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 104 + 0x00, 0x00, 0x00, 0xC8, 0x7F, // 105 + 0x00, 0x00, 0x02, 0xC8, 0xFF, 0x01, // 106 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x06, 0x00, 0x00, 0x19, 0x00, 0x80, 0x20, 0x00, + 0x40, 0x40, // 107 + 0x00, 0x00, 0x00, 0xF8, 0x7F, // 108 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, 0x00, + 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 109 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 110 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 111 + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x03, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 112 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0xC0, 0xFF, 0x03, // 113 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, // 114 + 0x00, 0x00, 0x00, 0x80, 0x23, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x38, // 115 + 0x40, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, // 116 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xC0, 0x7F, // 117 + 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, // 118 + 0xC0, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, + 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1F, 0x00, 0xC0, // 119 + 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, // 120 + 0xC0, 0x01, 0x00, 0x00, 0x06, 0x02, 0x00, 0x38, 0x02, 0x00, 0xE0, 0x01, 0x00, 0x38, 0x00, 0x00, 0x07, 0x00, 0xC0, // 121 + 0x40, 0x40, 0x00, 0x40, 0x60, 0x00, 0x40, 0x58, 0x00, 0x40, 0x44, 0x00, 0x40, 0x43, 0x00, 0xC0, 0x40, 0x00, 0x40, 0x40, // 122 + 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0xF0, 0xFB, 0x01, 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, // 123 + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x03, // 124 + 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, 0xF0, 0xFB, 0x01, 0x00, 0x04, 0x00, 0x00, 0x04, // 125 + 0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, // 126 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x09, 0x40, 0x00, 0x0A, 0x40, 0x00, 0x0A, 0x40, 0x00, + 0x09, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 129 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x09, 0x40, 0x00, 0x0A, 0x40, 0x00, 0x0A, 0x40, 0x00, + 0x09, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 130 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x09, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x0A, 0x41, 0x00, + 0x09, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 131 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x10, 0x00, 0x00, 0x60, 0x00, 0x00, 0x81, 0x00, 0x00, 0x02, 0x03, 0x00, 0x02, 0x04, 0x00, + 0x01, 0x18, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x7F, // 132 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x09, 0x02, 0x00, 0x0A, 0x02, 0x00, 0x0A, 0x06, 0x00, + 0x09, 0x1A, 0x00, 0x10, 0x21, 0x00, 0xE0, 0x40, // 133 + 0x00, 0x00, 0x00, 0x60, 0x10, 0x00, 0x90, 0x20, 0x00, 0x08, 0x41, 0x00, 0x09, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x0A, 0x42, 0x00, + 0x09, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x1C, // 134 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x09, 0x00, 0x00, 0xFA, 0x7F, 0x00, 0x0A, 0x00, 0x00, 0x09, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 135 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x06, 0x40, 0x00, 0x09, 0x40, 0x00, 0x09, 0x40, 0x00, + 0x06, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 136 + 0x00, 0x40, 0x00, 0x08, 0x60, 0x00, 0x08, 0x58, 0x00, 0x09, 0x44, 0x00, 0x0A, 0x43, 0x00, 0x8A, 0x40, 0x00, 0x69, 0x40, 0x00, + 0x18, 0x40, 0x00, 0x08, 0x40, // 137 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x48, 0x40, 0x00, 0x50, 0x40, 0x00, 0x50, 0x40, 0x00, 0x88, 0x20, // 138 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0xF8, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x38, // 139 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x48, 0x44, 0x00, 0x50, 0x44, 0x00, 0x50, 0x44, 0x00, 0x88, 0x24, 0x00, + 0x00, 0x17, // 140 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x88, 0x00, 0x00, 0x50, 0x00, 0x00, 0x50, 0x00, 0x00, 0x48, 0x00, 0x00, 0x80, 0x7F, // 141 + 0x00, 0x00, 0x00, 0xC8, 0x7F, 0x00, 0x90, 0x00, 0x00, 0x50, 0x00, 0x00, 0x48, // 142 + 0x00, 0x00, 0x00, 0x80, 0x23, 0x00, 0x48, 0x44, 0x00, 0x50, 0x44, 0x00, 0x50, 0x44, 0x00, 0x48, 0x44, 0x00, 0x80, 0x38, // 143 + 0x40, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x00, 0x00, 0x00, 0x70, // 144 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x0C, 0x40, 0x00, 0x12, 0x40, 0x00, 0x12, 0x40, 0x00, 0x0C, 0x20, 0x00, 0xC0, 0x7F, // 145 + 0x40, 0x40, 0x00, 0x40, 0x60, 0x00, 0x48, 0x58, 0x00, 0x50, 0x44, 0x00, 0x50, 0x43, 0x00, 0xC8, 0x40, 0x00, 0x40, 0x40, // 146 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x02, 0x40, 0x00, 0x01, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, // 147 + 0x00, 0x00, 0x00, 0xFA, 0x7F, 0x00, 0x01, // 148 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x38, 0x40, 0x00, + 0x00, 0x40, // 149 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x38, // 150 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x0A, 0x02, 0x00, 0x09, 0x06, 0x00, + 0x08, 0x1A, 0x00, 0x10, 0x21, 0x00, 0xE0, 0x40, // 151 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x50, 0x00, 0x00, 0x48, // 152 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0xFF, 0x03, // 161 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x03, 0x40, 0xF0, 0x00, 0x40, 0x4E, 0x00, 0xC0, 0x41, 0x00, 0xB8, 0x20, 0x00, + 0x00, 0x11, // 162 + 0x00, 0x41, 0x00, 0xE0, 0x31, 0x00, 0x10, 0x2F, 0x00, 0x08, 0x21, 0x00, 0x08, 0x21, 0x00, 0x08, 0x40, 0x00, 0x10, 0x40, 0x00, + 0x20, 0x20, // 163 + 0x00, 0x00, 0x00, 0x40, 0x0B, 0x00, 0x80, 0x04, 0x00, 0x40, 0x08, 0x00, 0x40, 0x08, 0x00, 0x80, 0x04, 0x00, 0x40, 0x0B, // 164 + 0x08, 0x0A, 0x00, 0x10, 0x0A, 0x00, 0x60, 0x0A, 0x00, 0x80, 0x0B, 0x00, 0x00, 0x7E, 0x00, 0x80, 0x0B, 0x00, 0x60, 0x0A, 0x00, + 0x10, 0x0A, 0x00, 0x08, 0x0A, // 165 + 0x00, 0x00, 0x00, 0xF8, 0xF1, 0x03, // 166 + 0x00, 0x86, 0x00, 0x70, 0x09, 0x01, 0xC8, 0x10, 0x02, 0x88, 0x10, 0x02, 0x08, 0x21, 0x02, 0x08, 0x61, 0x02, 0x30, 0xD2, 0x01, + 0x00, 0x0C, // 167 + 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, // 168 + 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0xC8, 0x47, 0x00, 0x28, 0x48, 0x00, 0x28, 0x48, 0x00, 0x28, 0x48, 0x00, + 0x28, 0x48, 0x00, 0x48, 0x44, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 169 + 0xD0, 0x00, 0x00, 0x48, 0x01, 0x00, 0x28, 0x01, 0x00, 0x28, 0x01, 0x00, 0xF0, 0x01, // 170 + 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, // 171 + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x80, 0x0F, // 172 + 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, // 173 + 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0xE8, 0x4F, 0x00, 0x28, 0x41, 0x00, 0x28, 0x41, 0x00, 0x28, 0x43, 0x00, + 0x28, 0x45, 0x00, 0xC8, 0x48, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 174 + 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, + 0x04, 0x00, 0x00, 0x04, // 175 + 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x48, 0x00, 0x00, 0x48, 0x00, 0x00, 0x30, // 176 + 0x00, 0x00, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0xE0, 0x4F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, // 177 + 0x10, 0x01, 0x00, 0x88, 0x01, 0x00, 0x48, 0x01, 0x00, 0x48, 0x01, 0x00, 0x30, 0x01, // 178 + 0x90, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x28, 0x01, 0x00, 0xD8, // 179 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, // 180 + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x03, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, + 0xC0, 0x7F, // 181 + 0xF0, 0x00, 0x00, 0xF8, 0x00, 0x00, 0xF8, 0x01, 0x00, 0xF8, 0x01, 0x00, 0xF8, 0xFF, 0x03, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0xF8, 0xFF, 0x03, 0x08, // 182 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, // 183 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x80, 0x02, 0x00, 0x00, 0x03, // 184 + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x01, // 185 + 0xF0, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0xF0, // 186 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, + 0x00, 0x04, // 187 + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, 0x40, 0x00, 0xF8, 0x21, 0x00, 0x00, 0x10, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x02, 0x00, + 0x80, 0x01, 0x00, 0x40, 0x30, 0x00, 0x30, 0x28, 0x00, 0x08, 0x24, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x20, // 188 + 0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, 0x40, 0x00, 0xF8, 0x31, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x03, 0x00, + 0x80, 0x00, 0x00, 0x60, 0x44, 0x00, 0x10, 0x62, 0x00, 0x08, 0x52, 0x00, 0x00, 0x52, 0x00, 0x00, 0x4C, // 189 + 0x90, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x41, 0x00, 0x28, 0x21, 0x00, 0xD8, 0x18, 0x00, 0x00, 0x04, 0x00, 0x00, 0x03, 0x00, + 0x80, 0x00, 0x00, 0x40, 0x30, 0x00, 0x30, 0x28, 0x00, 0x08, 0x24, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x20, // 190 + 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x10, 0x01, 0x00, 0x08, 0x02, 0x40, 0x07, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x01, 0x00, 0xC0, // 191 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x71, 0x04, 0x00, 0x0A, 0x04, 0x00, 0x70, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 192 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x70, 0x04, 0x00, 0x0A, 0x04, 0x00, 0x71, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 193 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x72, 0x04, 0x00, 0x09, 0x04, 0x00, 0x71, 0x04, 0x00, + 0x82, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 194 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x72, 0x04, 0x00, 0x09, 0x04, 0x00, 0x72, 0x04, 0x00, + 0x81, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 195 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x72, 0x04, 0x00, 0x08, 0x04, 0x00, 0x72, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 196 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x7E, 0x04, 0x00, 0x0A, 0x04, 0x00, 0x7E, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 197 + 0x00, 0x60, 0x00, 0x00, 0x18, 0x00, 0x00, 0x06, 0x00, 0x80, 0x05, 0x00, 0x60, 0x04, 0x00, 0x18, 0x04, 0x00, 0x08, 0x04, 0x00, + 0x08, 0x04, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, // 198 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x02, 0x08, 0xC0, 0x02, + 0x08, 0x40, 0x03, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 199 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x09, 0x41, 0x00, 0x0A, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 200 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x09, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 201 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x09, 0x41, 0x00, 0x09, 0x41, 0x00, + 0x0A, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 202 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 203 + 0x01, 0x00, 0x00, 0xFA, 0x7F, // 204 + 0x00, 0x00, 0x00, 0xFA, 0x7F, 0x00, 0x01, // 205 + 0x02, 0x00, 0x00, 0xF9, 0x7F, 0x00, 0x01, 0x00, 0x00, 0x02, // 206 + 0x02, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x02, // 207 + 0x00, 0x02, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x42, 0x00, 0x08, 0x42, 0x00, 0x08, 0x42, 0x00, 0x08, 0x42, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 208 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x10, 0x00, 0x00, 0x60, 0x00, 0x00, 0x82, 0x00, 0x00, 0x01, 0x03, 0x00, 0x02, 0x04, 0x00, + 0x01, 0x18, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x7F, // 209 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x09, 0x40, 0x00, 0x0A, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 210 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x0A, 0x40, 0x00, 0x09, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 211 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x0A, 0x40, 0x00, 0x09, 0x40, 0x00, 0x09, 0x40, 0x00, + 0x0A, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 212 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x0A, 0x40, 0x00, 0x09, 0x40, 0x00, 0x0A, 0x40, 0x00, + 0x09, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 213 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x0A, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x0A, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 214 + 0x00, 0x00, 0x00, 0x40, 0x10, 0x00, 0x80, 0x08, 0x00, 0x00, 0x05, 0x00, 0x00, 0x07, 0x00, 0x00, 0x05, 0x00, 0x80, 0x08, 0x00, + 0x40, 0x10, // 215 + 0x00, 0x00, 0x00, 0xC0, 0x4F, 0x00, 0x20, 0x30, 0x00, 0x10, 0x30, 0x00, 0x08, 0x4C, 0x00, 0x08, 0x42, 0x00, 0x08, 0x41, 0x00, + 0xC8, 0x40, 0x00, 0x30, 0x20, 0x00, 0x30, 0x10, 0x00, 0xC8, 0x0F, // 216 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x01, 0x40, 0x00, 0x02, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 217 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x02, 0x40, 0x00, 0x01, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 218 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x02, 0x40, 0x00, 0x01, 0x40, 0x00, 0x01, 0x40, 0x00, + 0x02, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 219 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x02, 0x40, 0x00, 0x00, 0x40, 0x00, 0x02, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 220 + 0x08, 0x00, 0x00, 0x30, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x01, 0x00, 0x02, 0x7E, 0x00, 0x81, 0x01, 0x00, 0x40, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x08, // 221 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x20, 0x10, 0x00, 0x20, 0x10, 0x00, 0x20, 0x10, 0x00, 0x20, 0x10, 0x00, 0x20, 0x10, 0x00, + 0x20, 0x10, 0x00, 0x40, 0x08, 0x00, 0x80, 0x07, // 222 + 0x00, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x10, 0x00, 0x00, 0x08, 0x20, 0x00, 0x88, 0x43, 0x00, 0x70, 0x42, 0x00, 0x00, 0x44, 0x00, + 0x00, 0x38, // 223 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x48, 0x44, 0x00, 0x50, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 224 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x50, 0x44, 0x00, 0x48, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 225 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x50, 0x44, 0x00, 0x48, 0x44, 0x00, 0x48, 0x42, 0x00, 0x50, 0x22, 0x00, + 0x80, 0x7F, // 226 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x50, 0x44, 0x00, 0x48, 0x44, 0x00, 0x50, 0x42, 0x00, 0x48, 0x22, 0x00, + 0x80, 0x7F, // 227 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x50, 0x44, 0x00, 0x40, 0x44, 0x00, 0x50, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 228 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x5C, 0x44, 0x00, 0x54, 0x44, 0x00, 0x5C, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 229 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x3F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, 0x00, 0x17, // 230 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x02, 0x40, 0xC0, 0x02, 0x40, 0x40, 0x03, 0x80, 0x20, // 231 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x48, 0x44, 0x00, 0x50, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 232 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x50, 0x44, 0x00, 0x48, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 233 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x50, 0x44, 0x00, 0x48, 0x44, 0x00, 0x48, 0x44, 0x00, 0x90, 0x24, 0x00, + 0x00, 0x17, // 234 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x50, 0x44, 0x00, 0x40, 0x44, 0x00, 0x50, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 235 + 0x08, 0x00, 0x00, 0xD0, 0x7F, // 236 + 0x00, 0x00, 0x00, 0xD0, 0x7F, 0x00, 0x08, // 237 + 0x10, 0x00, 0x00, 0xC8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x10, // 238 + 0x10, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x10, // 239 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0xA0, 0x20, 0x00, 0x68, 0x40, 0x00, 0x58, 0x40, 0x00, 0x70, 0x40, 0x00, 0xE8, 0x20, 0x00, + 0x00, 0x1F, // 240 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x90, 0x00, 0x00, 0x48, 0x00, 0x00, 0x50, 0x00, 0x00, 0x48, 0x00, 0x00, 0x80, 0x7F, // 241 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x48, 0x40, 0x00, 0x50, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 242 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x50, 0x40, 0x00, 0x48, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 243 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x50, 0x40, 0x00, 0x48, 0x40, 0x00, 0x48, 0x40, 0x00, 0x90, 0x20, 0x00, + 0x00, 0x1F, // 244 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x50, 0x40, 0x00, 0x48, 0x40, 0x00, 0x50, 0x40, 0x00, 0x88, 0x20, 0x00, + 0x00, 0x1F, // 245 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x50, 0x40, 0x00, 0x40, 0x40, 0x00, 0x50, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 246 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x80, 0x0A, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x02, // 247 + 0x00, 0x00, 0x00, 0x00, 0x5F, 0x00, 0x80, 0x30, 0x00, 0x40, 0x48, 0x00, 0x40, 0x44, 0x00, 0x40, 0x42, 0x00, 0x80, 0x21, 0x00, + 0x40, 0x1F, // 248 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x40, 0x00, 0x00, 0x20, 0x00, 0xC0, 0x7F, // 249 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x10, 0x40, 0x00, 0x08, 0x20, 0x00, 0xC0, 0x7F, // 250 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x10, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0xC0, 0x7F, // 251 + 0x00, 0x00, 0x00, 0xD0, 0x3F, 0x00, 0x00, 0x40, 0x00, 0x10, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xC0, 0x7F, // 252 + 0xC0, 0x01, 0x00, 0x00, 0x06, 0x02, 0x00, 0x38, 0x02, 0x10, 0xE0, 0x01, 0x08, 0x38, 0x00, 0x00, 0x07, 0x00, 0xC0, // 253 + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x03, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 254 + 0xC0, 0x01, 0x00, 0x00, 0x06, 0x02, 0x10, 0x38, 0x02, 0x00, 0xE0, 0x01, 0x10, 0x38, 0x00, 0x00, 0x07, 0x00, 0xC0, // 255 +}; + +const uint8_t ArialMT_Plain_24_CS[] PROGMEM = { + 0x18, // Width: 24 + 0x1C, // Height: 28 + 0x20, // First char: 32 + 0xE0, // Number of chars: 224 + // Jump Table: + 0xFF, 0xFF, 0x00, 0x18, // 32 + 0x00, 0x00, 0x13, 0x06, // 33 + 0x00, 0x13, 0x1A, 0x08, // 34 + 0x00, 0x2D, 0x33, 0x0E, // 35 + 0x00, 0x60, 0x2F, 0x0D, // 36 + 0x00, 0x8F, 0x4F, 0x15, // 37 + 0x00, 0xDE, 0x3B, 0x10, // 38 + 0x01, 0x19, 0x0A, 0x04, // 39 + 0x01, 0x23, 0x1C, 0x08, // 40 + 0x01, 0x3F, 0x1B, 0x08, // 41 + 0x01, 0x5A, 0x21, 0x0A, // 42 + 0x01, 0x7B, 0x32, 0x0E, // 43 + 0x01, 0xAD, 0x10, 0x05, // 44 + 0x01, 0xBD, 0x1B, 0x08, // 45 + 0x01, 0xD8, 0x0F, 0x05, // 46 + 0x01, 0xE7, 0x19, 0x08, // 47 + 0x02, 0x00, 0x2F, 0x0D, // 48 + 0x02, 0x2F, 0x23, 0x0A, // 49 + 0x02, 0x52, 0x2F, 0x0D, // 50 + 0x02, 0x81, 0x2F, 0x0D, // 51 + 0x02, 0xB0, 0x2F, 0x0D, // 52 + 0x02, 0xDF, 0x2F, 0x0D, // 53 + 0x03, 0x0E, 0x2F, 0x0D, // 54 + 0x03, 0x3D, 0x2D, 0x0D, // 55 + 0x03, 0x6A, 0x2F, 0x0D, // 56 + 0x03, 0x99, 0x2F, 0x0D, // 57 + 0x03, 0xC8, 0x0F, 0x05, // 58 + 0x03, 0xD7, 0x10, 0x05, // 59 + 0x03, 0xE7, 0x2F, 0x0D, // 60 + 0x04, 0x16, 0x2F, 0x0D, // 61 + 0x04, 0x45, 0x2E, 0x0D, // 62 + 0x04, 0x73, 0x2E, 0x0D, // 63 + 0x04, 0xA1, 0x5B, 0x18, // 64 + 0x04, 0xFC, 0x3B, 0x10, // 65 + 0x05, 0x37, 0x3B, 0x10, // 66 + 0x05, 0x72, 0x3F, 0x11, // 67 + 0x05, 0xB1, 0x3F, 0x11, // 68 + 0x05, 0xF0, 0x3B, 0x10, // 69 + 0x06, 0x2B, 0x35, 0x0F, // 70 + 0x06, 0x60, 0x43, 0x12, // 71 + 0x06, 0xA3, 0x3B, 0x10, // 72 + 0x06, 0xDE, 0x0F, 0x05, // 73 + 0x06, 0xED, 0x27, 0x0B, // 74 + 0x07, 0x14, 0x3F, 0x11, // 75 + 0x07, 0x53, 0x2F, 0x0D, // 76 + 0x07, 0x82, 0x43, 0x12, // 77 + 0x07, 0xC5, 0x3B, 0x10, // 78 + 0x08, 0x00, 0x47, 0x13, // 79 + 0x08, 0x47, 0x3A, 0x10, // 80 + 0x08, 0x81, 0x47, 0x13, // 81 + 0x08, 0xC8, 0x3F, 0x11, // 82 + 0x09, 0x07, 0x3B, 0x10, // 83 + 0x09, 0x42, 0x35, 0x0F, // 84 + 0x09, 0x77, 0x3B, 0x10, // 85 + 0x09, 0xB2, 0x39, 0x10, // 86 + 0x09, 0xEB, 0x59, 0x18, // 87 + 0x0A, 0x44, 0x3B, 0x10, // 88 + 0x0A, 0x7F, 0x3D, 0x11, // 89 + 0x0A, 0xBC, 0x37, 0x0F, // 90 + 0x0A, 0xF3, 0x14, 0x06, // 91 + 0x0B, 0x07, 0x1B, 0x08, // 92 + 0x0B, 0x22, 0x18, 0x07, // 93 + 0x0B, 0x3A, 0x2A, 0x0C, // 94 + 0x0B, 0x64, 0x34, 0x0E, // 95 + 0x0B, 0x98, 0x11, 0x06, // 96 + 0x0B, 0xA9, 0x2F, 0x0D, // 97 + 0x0B, 0xD8, 0x33, 0x0E, // 98 + 0x0C, 0x0B, 0x2B, 0x0C, // 99 + 0x0C, 0x36, 0x2F, 0x0D, // 100 + 0x0C, 0x65, 0x2F, 0x0D, // 101 + 0x0C, 0x94, 0x1A, 0x08, // 102 + 0x0C, 0xAE, 0x2F, 0x0D, // 103 + 0x0C, 0xDD, 0x2F, 0x0D, // 104 + 0x0D, 0x0C, 0x0F, 0x05, // 105 + 0x0D, 0x1B, 0x10, 0x05, // 106 + 0x0D, 0x2B, 0x2F, 0x0D, // 107 + 0x0D, 0x5A, 0x0F, 0x05, // 108 + 0x0D, 0x69, 0x47, 0x13, // 109 + 0x0D, 0xB0, 0x2F, 0x0D, // 110 + 0x0D, 0xDF, 0x2F, 0x0D, // 111 + 0x0E, 0x0E, 0x33, 0x0E, // 112 + 0x0E, 0x41, 0x30, 0x0D, // 113 + 0x0E, 0x71, 0x1E, 0x09, // 114 + 0x0E, 0x8F, 0x2B, 0x0C, // 115 + 0x0E, 0xBA, 0x1B, 0x08, // 116 + 0x0E, 0xD5, 0x2F, 0x0D, // 117 + 0x0F, 0x04, 0x2A, 0x0C, // 118 + 0x0F, 0x2E, 0x42, 0x12, // 119 + 0x0F, 0x70, 0x2B, 0x0C, // 120 + 0x0F, 0x9B, 0x2A, 0x0C, // 121 + 0x0F, 0xC5, 0x2B, 0x0C, // 122 + 0x0F, 0xF0, 0x1C, 0x08, // 123 + 0x10, 0x0C, 0x10, 0x05, // 124 + 0x10, 0x1C, 0x1B, 0x08, // 125 + 0x10, 0x37, 0x32, 0x0E, // 126 + 0xFF, 0xFF, 0x00, 0x18, // 127 + 0xFF, 0xFF, 0x00, 0x18, // 128 + 0x10, 0x69, 0x3F, 0x11, // 129 + 0x10, 0xA8, 0x3F, 0x11, // 130 + 0x10, 0xE7, 0x3B, 0x10, // 131 + 0x11, 0x22, 0x3B, 0x10, // 132 + 0x11, 0x5D, 0x3F, 0x11, // 133 + 0x11, 0x9C, 0x3B, 0x10, // 134 + 0x11, 0xD7, 0x35, 0x0F, // 135 + 0x12, 0x0C, 0x3B, 0x10, // 136 + 0x12, 0x47, 0x37, 0x0F, // 137 + 0x12, 0x7E, 0x2B, 0x0C, // 138 + 0x12, 0xA9, 0x3A, 0x10, // 139 + 0x12, 0xE3, 0x2F, 0x0D, // 140 + 0x13, 0x12, 0x2F, 0x0D, // 141 + 0x13, 0x41, 0x1E, 0x09, // 142 + 0x13, 0x5F, 0x2B, 0x0C, // 143 + 0x13, 0x8A, 0x26, 0x0B, // 144 + 0x13, 0xB0, 0x2F, 0x0D, // 145 + 0x13, 0xDF, 0x2B, 0x0C, // 146 + 0x14, 0x0A, 0x2F, 0x0D, // 147 + 0x14, 0x39, 0x15, 0x07, // 148 + 0x14, 0x4E, 0x2F, 0x0D, // 149 + 0x14, 0x7D, 0x1A, 0x08, // 150 + 0x14, 0x97, 0x3F, 0x11, // 151 + 0x14, 0xD6, 0x1E, 0x09, // 152 + 0xFF, 0xFF, 0x00, 0x18, // 153 + 0xFF, 0xFF, 0x00, 0x18, // 154 + 0xFF, 0xFF, 0x00, 0x18, // 155 + 0xFF, 0xFF, 0x00, 0x18, // 156 + 0xFF, 0xFF, 0x00, 0x18, // 157 + 0xFF, 0xFF, 0x00, 0x18, // 158 + 0xFF, 0xFF, 0x00, 0x18, // 159 + 0xFF, 0xFF, 0x00, 0x18, // 160 + 0x14, 0xF4, 0x14, 0x06, // 161 + 0x15, 0x08, 0x2B, 0x0C, // 162 + 0x15, 0x33, 0x2F, 0x0D, // 163 + 0x15, 0x62, 0x33, 0x0E, // 164 + 0x15, 0x95, 0x31, 0x0E, // 165 + 0x15, 0xC6, 0x10, 0x05, // 166 + 0x15, 0xD6, 0x2F, 0x0D, // 167 + 0x16, 0x05, 0x19, 0x08, // 168 + 0x16, 0x1E, 0x46, 0x13, // 169 + 0x16, 0x64, 0x1A, 0x08, // 170 + 0x16, 0x7E, 0x27, 0x0B, // 171 + 0x16, 0xA5, 0x2F, 0x0D, // 172 + 0x16, 0xD4, 0x1B, 0x08, // 173 + 0x16, 0xEF, 0x46, 0x13, // 174 + 0x17, 0x35, 0x31, 0x0E, // 175 + 0x17, 0x66, 0x1E, 0x09, // 176 + 0x17, 0x84, 0x33, 0x0E, // 177 + 0x17, 0xB7, 0x1A, 0x08, // 178 + 0x17, 0xD1, 0x1A, 0x08, // 179 + 0x17, 0xEB, 0x19, 0x08, // 180 + 0x18, 0x04, 0x2F, 0x0D, // 181 + 0x18, 0x33, 0x31, 0x0E, // 182 + 0x18, 0x64, 0x12, 0x06, // 183 + 0x18, 0x76, 0x18, 0x07, // 184 + 0x18, 0x8E, 0x16, 0x07, // 185 + 0x18, 0xA4, 0x1E, 0x09, // 186 + 0x18, 0xC2, 0x2E, 0x0D, // 187 + 0x18, 0xF0, 0x4F, 0x15, // 188 + 0x19, 0x3F, 0x4B, 0x14, // 189 + 0x19, 0x8A, 0x4B, 0x14, // 190 + 0x19, 0xD5, 0x33, 0x0E, // 191 + 0x1A, 0x08, 0x3B, 0x10, // 192 + 0x1A, 0x43, 0x3B, 0x10, // 193 + 0x1A, 0x7E, 0x3B, 0x10, // 194 + 0x1A, 0xB9, 0x3B, 0x10, // 195 + 0x1A, 0xF4, 0x3B, 0x10, // 196 + 0x1B, 0x2F, 0x3B, 0x10, // 197 + 0x1B, 0x6A, 0x5B, 0x18, // 198 + 0x1B, 0xC5, 0x3F, 0x11, // 199 + 0x1C, 0x04, 0x3B, 0x10, // 200 + 0x1C, 0x3F, 0x3B, 0x10, // 201 + 0x1C, 0x7A, 0x3B, 0x10, // 202 + 0x1C, 0xB5, 0x3B, 0x10, // 203 + 0x1C, 0xF0, 0x11, 0x06, // 204 + 0x1D, 0x01, 0x11, 0x06, // 205 + 0x1D, 0x12, 0x15, 0x07, // 206 + 0x1D, 0x27, 0x15, 0x07, // 207 + 0x1D, 0x3C, 0x3F, 0x11, // 208 + 0x1D, 0x7B, 0x3B, 0x10, // 209 + 0x1D, 0xB6, 0x47, 0x13, // 210 + 0x1D, 0xFD, 0x47, 0x13, // 211 + 0x1E, 0x44, 0x47, 0x13, // 212 + 0x1E, 0x8B, 0x47, 0x13, // 213 + 0x1E, 0xD2, 0x47, 0x13, // 214 + 0x1F, 0x19, 0x2B, 0x0C, // 215 + 0x1F, 0x44, 0x47, 0x13, // 216 + 0x1F, 0x8B, 0x3B, 0x10, // 217 + 0x1F, 0xC6, 0x3B, 0x10, // 218 + 0x20, 0x01, 0x3B, 0x10, // 219 + 0x20, 0x3C, 0x3B, 0x10, // 220 + 0x20, 0x77, 0x3D, 0x11, // 221 + 0x20, 0xB4, 0x3A, 0x10, // 222 + 0x20, 0xEE, 0x37, 0x0F, // 223 + 0x21, 0x25, 0x2F, 0x0D, // 224 + 0x21, 0x54, 0x2F, 0x0D, // 225 + 0x21, 0x83, 0x2F, 0x0D, // 226 + 0x21, 0xB2, 0x2F, 0x0D, // 227 + 0x21, 0xE1, 0x2F, 0x0D, // 228 + 0x22, 0x10, 0x2F, 0x0D, // 229 + 0x22, 0x3F, 0x53, 0x16, // 230 + 0x22, 0x92, 0x2B, 0x0C, // 231 + 0x22, 0xBD, 0x2F, 0x0D, // 232 + 0x22, 0xEC, 0x2F, 0x0D, // 233 + 0x23, 0x1B, 0x2F, 0x0D, // 234 + 0x23, 0x4A, 0x2F, 0x0D, // 235 + 0x23, 0x79, 0x11, 0x06, // 236 + 0x23, 0x8A, 0x11, 0x06, // 237 + 0x23, 0x9B, 0x15, 0x07, // 238 + 0x23, 0xB0, 0x15, 0x07, // 239 + 0x23, 0xC5, 0x2F, 0x0D, // 240 + 0x23, 0xF4, 0x2F, 0x0D, // 241 + 0x24, 0x23, 0x2F, 0x0D, // 242 + 0x24, 0x52, 0x2F, 0x0D, // 243 + 0x24, 0x81, 0x2F, 0x0D, // 244 + 0x24, 0xB0, 0x2F, 0x0D, // 245 + 0x24, 0xDF, 0x2F, 0x0D, // 246 + 0x25, 0x0E, 0x32, 0x0E, // 247 + 0x25, 0x40, 0x33, 0x0E, // 248 + 0x25, 0x73, 0x2F, 0x0D, // 249 + 0x25, 0xA2, 0x2F, 0x0D, // 250 + 0x25, 0xD1, 0x2F, 0x0D, // 251 + 0x26, 0x00, 0x2F, 0x0D, // 252 + 0x26, 0x2F, 0x2A, 0x0C, // 253 + 0x26, 0x59, 0x2F, 0x0D, // 254 + 0x26, 0x88, 0x2A, 0x0C, // 255 + // Font Data: + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x33, 0x00, 0xE0, 0xFF, 0x33, // 33 + 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, + 0x07, 0x00, 0x00, 0xE0, 0x07, // 34 + 0x00, 0x0C, 0x03, 0x00, 0x00, 0x0C, 0x33, 0x00, 0x00, 0x0C, 0x3F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x80, 0xFF, 0x03, 0x00, 0xE0, + 0x0F, 0x03, 0x00, 0x60, 0x0C, 0x33, 0x00, 0x00, 0x0C, 0x3F, 0x00, 0x00, 0xFC, 0x0F, 0x00, 0x80, 0xFF, 0x03, 0x00, 0xE0, 0x0F, + 0x03, 0x00, 0x60, 0x0C, 0x03, 0x00, 0x00, 0x0C, 0x03, // 35 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x06, 0x00, 0xC0, 0x0F, 0x1E, 0x00, 0xC0, 0x18, 0x1C, 0x00, 0x60, 0x18, 0x38, 0x00, 0x60, + 0x30, 0x30, 0x00, 0xF0, 0xFF, 0xFF, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x60, 0x38, 0x00, 0xC0, 0x60, 0x18, 0x00, 0xC0, 0xC1, + 0x1F, 0x00, 0x00, 0x81, 0x07, // 36 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x20, 0x20, 0x00, 0x00, 0x20, + 0x20, 0x20, 0x00, 0x60, 0x30, 0x38, 0x00, 0xC0, 0x1F, 0x1E, 0x00, 0x80, 0x8F, 0x0F, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xF0, + 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x8F, 0x0F, 0x00, 0xC0, 0xC3, 0x1F, 0x00, 0xE0, 0x60, 0x30, 0x00, 0x20, 0x20, 0x20, + 0x00, 0x00, 0x20, 0x20, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0x80, 0x0F, // 37 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x80, 0xE3, 0x1C, 0x00, 0xC0, 0x77, 0x38, 0x00, 0xE0, + 0x3C, 0x30, 0x00, 0x60, 0x38, 0x30, 0x00, 0x60, 0x78, 0x30, 0x00, 0xE0, 0xEC, 0x38, 0x00, 0xC0, 0x8F, 0x1B, 0x00, 0x80, 0x03, + 0x1F, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xC0, 0x38, 0x00, 0x00, 0x00, 0x10, // 38 + 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xE0, 0x07, // 39 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0x00, 0xFE, 0x7F, 0x00, 0x80, 0x0F, 0xF0, 0x01, 0xC0, 0x01, 0x80, 0x03, 0x60, + 0x00, 0x00, 0x06, 0x20, 0x00, 0x00, 0x04, // 40 + 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x04, 0x60, 0x00, 0x00, 0x06, 0xC0, 0x01, 0x80, 0x03, 0x80, 0x0F, 0xF0, 0x01, 0x00, + 0xFE, 0x7F, 0x00, 0x00, 0xF0, 0x0F, // 41 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xE0, + 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x80, 0x04, 0x00, 0x00, 0x80, // 42 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, + 0x60, 0x00, 0x00, 0x00, 0xFF, 0x0F, 0x00, 0x00, 0xFF, 0x0F, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, + 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, // 43 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x03, 0x00, 0x00, 0xF0, 0x01, // 44 + 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 45 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, // 46 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xE0, + 0x03, 0x00, 0x00, 0x60, // 47 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x60, + 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0xE0, 0x00, 0x38, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0xFF, + 0x0F, 0x00, 0x00, 0xFE, 0x03, // 48 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x03, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 49 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x30, 0x00, 0xC0, 0x03, 0x38, 0x00, 0xC0, 0x00, 0x3C, 0x00, 0x60, 0x00, 0x36, 0x00, 0x60, + 0x00, 0x33, 0x00, 0x60, 0x80, 0x31, 0x00, 0x60, 0xC0, 0x30, 0x00, 0x60, 0x60, 0x30, 0x00, 0xC0, 0x30, 0x30, 0x00, 0xC0, 0x1F, + 0x30, 0x00, 0x00, 0x0F, 0x30, // 50 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x06, 0x00, 0xC0, 0x01, 0x0E, 0x00, 0xC0, 0x00, 0x1C, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0xC0, 0x38, 0x30, 0x00, 0xC0, 0x6F, 0x18, 0x00, 0x80, 0xC7, + 0x0F, 0x00, 0x00, 0x80, 0x07, // 51 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x3C, 0x03, 0x00, 0x00, + 0x0E, 0x03, 0x00, 0x80, 0x07, 0x03, 0x00, 0xC0, 0x01, 0x03, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, + 0x03, 0x00, 0x00, 0x00, 0x03, // 52 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x06, 0x00, 0x80, 0x3F, 0x0E, 0x00, 0xE0, 0x1F, 0x18, 0x00, 0x60, 0x08, 0x30, 0x00, 0x60, + 0x0C, 0x30, 0x00, 0x60, 0x0C, 0x30, 0x00, 0x60, 0x0C, 0x30, 0x00, 0x60, 0x0C, 0x30, 0x00, 0x60, 0x18, 0x1C, 0x00, 0x60, 0xF0, + 0x0F, 0x00, 0x00, 0xE0, 0x03, // 53 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x03, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0xC0, 0x63, 0x1C, 0x00, 0xC0, 0x30, 0x38, 0x00, 0x60, + 0x18, 0x30, 0x00, 0x60, 0x18, 0x30, 0x00, 0x60, 0x18, 0x30, 0x00, 0x60, 0x18, 0x30, 0x00, 0xE0, 0x30, 0x18, 0x00, 0xC0, 0xF1, + 0x0F, 0x00, 0x80, 0xC1, 0x07, // 54 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x3C, 0x00, 0x60, + 0x80, 0x3F, 0x00, 0x60, 0xE0, 0x03, 0x00, 0x60, 0x78, 0x00, 0x00, 0x60, 0x0E, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0xE0, 0x01, + 0x00, 0x00, 0x60, // 55 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x80, 0xC7, 0x1F, 0x00, 0xC0, 0x6F, 0x18, 0x00, 0xE0, 0x38, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0xE0, 0x38, 0x30, 0x00, 0xC0, 0x6F, 0x18, 0x00, 0x80, 0xC7, + 0x1F, 0x00, 0x00, 0x80, 0x07, // 56 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x0C, 0x00, 0x80, 0x7F, 0x1C, 0x00, 0xC0, 0x61, 0x38, 0x00, 0x60, 0xC0, 0x30, 0x00, 0x60, + 0xC0, 0x30, 0x00, 0x60, 0xC0, 0x30, 0x00, 0x60, 0xC0, 0x30, 0x00, 0x60, 0x60, 0x18, 0x00, 0xC0, 0x31, 0x1E, 0x00, 0x80, 0xFF, + 0x0F, 0x00, 0x00, 0xFE, 0x01, // 57 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, // 58 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x30, 0x03, 0x00, 0x06, 0xF0, 0x01, // 59 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x50, 0x00, 0x00, 0x00, 0xD8, 0x00, 0x00, 0x00, + 0xD8, 0x00, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, 0x06, 0x03, 0x00, 0x00, 0x06, + 0x03, 0x00, 0x00, 0x03, 0x06, // 60 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, + 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0x8C, + 0x01, 0x00, 0x00, 0x8C, 0x01, // 61 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0x06, 0x03, 0x00, 0x00, 0x06, 0x03, 0x00, 0x00, 0x04, 0x01, 0x00, 0x00, + 0x8C, 0x01, 0x00, 0x00, 0x8C, 0x01, 0x00, 0x00, 0xD8, 0x00, 0x00, 0x00, 0xD8, 0x00, 0x00, 0x00, 0x50, 0x00, 0x00, 0x00, 0x70, + 0x00, 0x00, 0x00, 0x20, // 62 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x60, + 0x80, 0x33, 0x00, 0x60, 0xC0, 0x33, 0x00, 0x60, 0xE0, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0xC0, 0x38, 0x00, 0x00, 0xC0, 0x1F, + 0x00, 0x00, 0x00, 0x07, // 63 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xF8, 0x3F, 0x00, 0x00, 0x1E, 0xF0, 0x00, 0x00, 0x07, 0xC0, 0x01, 0x80, + 0xC3, 0x87, 0x01, 0xC0, 0xF1, 0x9F, 0x03, 0xC0, 0x38, 0x18, 0x03, 0xC0, 0x0C, 0x30, 0x03, 0x60, 0x0E, 0x30, 0x06, 0x60, 0x06, + 0x30, 0x06, 0x60, 0x06, 0x18, 0x06, 0x60, 0x06, 0x0C, 0x06, 0x60, 0x0C, 0x1E, 0x06, 0x60, 0xF8, 0x3F, 0x06, 0xE0, 0xFE, 0x31, + 0x06, 0xC0, 0x0E, 0x30, 0x06, 0xC0, 0x01, 0x18, 0x03, 0x80, 0x03, 0x1C, 0x03, 0x00, 0x07, 0x8F, 0x01, 0x00, 0xFE, 0x87, 0x01, + 0x00, 0xF8, 0xC1, 0x00, 0x00, 0x00, 0x40, // 64 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x80, + 0x8F, 0x01, 0x00, 0xE0, 0x83, 0x01, 0x00, 0x60, 0x80, 0x01, 0x00, 0xE0, 0x83, 0x01, 0x00, 0x80, 0x8F, 0x01, 0x00, 0x00, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 65 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, + 0x30, 0x00, 0xC0, 0x78, 0x30, 0x00, 0xC0, 0xFF, 0x18, 0x00, 0x80, 0xC7, 0x1F, 0x00, 0x00, 0x80, 0x07, // 66 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0F, 0x00, 0x00, 0x02, + 0x03, // 67 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, + 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x30, 0x00, 0xE0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0E, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, + 0x01, // 68 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, + 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 69 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, + 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, + 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, // 70 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x18, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x60, + 0x30, 0x00, 0x60, 0x60, 0x30, 0x00, 0xE0, 0x60, 0x38, 0x00, 0xC0, 0x60, 0x18, 0x00, 0xC0, 0x61, 0x18, 0x00, 0x80, 0xE3, 0x0F, + 0x00, 0x00, 0xE2, 0x0F, // 71 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, + 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 72 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 73 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x38, 0x00, 0xE0, 0xFF, 0x1F, 0x00, 0xE0, 0xFF, 0x0F, // 74 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, + 0x70, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0xE7, 0x01, 0x00, 0x80, 0x83, + 0x07, 0x00, 0xC0, 0x01, 0x0F, 0x00, 0xE0, 0x00, 0x1E, 0x00, 0x60, 0x00, 0x38, 0x00, 0x20, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x20, // 75 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x30, // 76 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, + 0x0F, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x3F, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xFE, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xE0, 0xFF, 0x3F, + 0x00, 0xE0, 0xFF, 0x3F, // 77 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, + 0x03, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x80, + 0x03, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 78 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0xE0, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 79 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x60, 0x00, 0x00, 0x60, + 0x60, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0x60, 0x60, + 0x00, 0x00, 0x60, 0x60, 0x00, 0x00, 0xC0, 0x30, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0x00, 0x0F, // 80 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x0C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x18, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x36, 0x00, 0x60, 0x00, 0x36, 0x00, 0xE0, 0x00, 0x3C, 0x00, 0xC0, 0x00, 0x1C, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x3F, + 0x00, 0x00, 0xFF, 0x77, 0x00, 0x00, 0xFC, 0x61, // 81 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, + 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x70, 0x00, 0x00, 0x60, 0xF0, 0x00, 0x00, 0x60, 0xF0, + 0x03, 0x00, 0x60, 0xB0, 0x07, 0x00, 0xE0, 0x18, 0x1F, 0x00, 0xC0, 0x1F, 0x3C, 0x00, 0x80, 0x0F, 0x30, 0x00, 0x00, 0x00, + 0x20, // 82 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x07, 0x0F, 0x00, 0xC0, 0x1F, 0x1C, 0x00, 0xC0, 0x18, 0x18, 0x00, 0x60, + 0x38, 0x38, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x70, + 0x30, 0x00, 0xC0, 0x60, 0x18, 0x00, 0xC0, 0xE1, 0x18, 0x00, 0x80, 0xC3, 0x0F, 0x00, 0x00, 0x83, 0x07, // 83 + 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, + 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, // 84 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 85 + 0x20, 0x00, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, + 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xF8, + 0x01, 0x00, 0x00, 0x3E, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x20, // 86 + 0x60, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0x80, 0xFF, 0x00, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x03, + 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xE0, 0x0F, + 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x80, 0xFF, 0x00, 0x00, + 0xE0, 0x07, 0x00, 0x00, 0x60, // 87 + 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0x30, 0x00, 0x60, 0x00, 0x3C, 0x00, 0xE0, 0x01, 0x1E, 0x00, 0xC0, 0x83, 0x07, 0x00, 0x00, + 0xCF, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x00, 0xCF, 0x03, 0x00, 0xC0, 0x03, + 0x07, 0x00, 0xE0, 0x01, 0x1E, 0x00, 0x60, 0x00, 0x3C, 0x00, 0x20, 0x00, 0x30, 0x00, 0x00, 0x00, 0x20, // 88 + 0x20, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x1E, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x1E, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x20, // 89 + 0x00, 0x00, 0x30, 0x00, 0x60, 0x00, 0x38, 0x00, 0x60, 0x00, 0x3C, 0x00, 0x60, 0x00, 0x37, 0x00, 0x60, 0x80, 0x33, 0x00, 0x60, + 0xC0, 0x31, 0x00, 0x60, 0xE0, 0x30, 0x00, 0x60, 0x38, 0x30, 0x00, 0x60, 0x1C, 0x30, 0x00, 0x60, 0x0E, 0x30, 0x00, 0x60, 0x07, + 0x30, 0x00, 0xE0, 0x01, 0x30, 0x00, 0xE0, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, // 90 + 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x60, 0x00, 0x00, 0x06, 0x60, 0x00, 0x00, 0x06, // 91 + 0x60, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, + 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 92 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x06, 0x60, 0x00, 0x00, 0x06, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, + 0xFF, 0xFF, 0x07, // 93 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xE0, + 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, + 0x20, // 94 + 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 95 + 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x80, // 96 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0x00, 0x8C, 0x39, 0x00, 0x00, 0x86, 0x31, 0x00, 0x00, + 0x86, 0x31, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x18, 0x00, 0x00, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 97 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, + 0x0C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, + 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xE0, 0x03, // 98 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x18, + 0x0C, // 99 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, 0x18, 0x0C, 0x00, 0xE0, 0xFF, + 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 100 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x00, + 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x00, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 101 + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0xC0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x06, 0x00, 0x00, 0x60, + 0x06, 0x00, 0x00, 0x60, 0x06, // 102 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x83, 0x01, 0x00, 0xF8, 0x8F, 0x03, 0x00, 0x1C, 0x1C, 0x07, 0x00, 0x0E, 0x38, 0x06, 0x00, + 0x06, 0x30, 0x06, 0x00, 0x06, 0x30, 0x06, 0x00, 0x06, 0x30, 0x06, 0x00, 0x0C, 0x18, 0x07, 0x00, 0x18, 0x8C, 0x03, 0x00, 0xFE, + 0xFF, 0x01, 0x00, 0xFE, 0xFF, // 103 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0xFC, + 0x3F, 0x00, 0x00, 0xF8, 0x3F, // 104 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0x60, 0xFE, 0x3F, // 105 + 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x60, 0xFE, 0xFF, 0x07, 0x60, 0xFE, 0xFF, 0x03, // 106 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xE0, 0x00, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x98, 0x07, 0x00, 0x00, 0x0C, 0x0E, 0x00, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x02, + 0x30, 0x00, 0x00, 0x00, 0x20, // 107 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 108 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x04, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0E, 0x00, + 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0xF8, 0x3F, // 109 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0xFC, + 0x3F, 0x00, 0x00, 0xF8, 0x3F, // 110 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 111 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFF, 0x07, 0x00, 0xFE, 0xFF, 0x07, 0x00, 0x18, 0x0C, 0x00, 0x00, + 0x0C, 0x18, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, + 0x1C, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xE0, 0x03, // 112 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0xFE, + 0xFF, 0x07, 0x00, 0xFE, 0xFF, 0x07, // 113 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 114 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x0C, 0x00, 0x00, 0x7C, 0x1C, 0x00, 0x00, 0xEE, 0x38, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, + 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x31, 0x00, 0x00, 0xC6, 0x31, 0x00, 0x00, 0x8E, 0x39, 0x00, 0x00, 0x9C, 0x1F, 0x00, 0x00, 0x18, + 0x0F, // 115 + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0xC0, 0xFF, 0x1F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, // 116 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 117 + 0x00, 0x06, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, + 0x06, // 118 + 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, + 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0xE0, + 0x03, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x7E, 0x00, + 0x00, 0x00, 0x0E, // 119 + 0x00, 0x02, 0x20, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x38, 0x0E, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, + 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0x38, 0x0E, 0x00, 0x00, 0x1C, 0x3C, 0x00, 0x00, 0x0E, 0x30, 0x00, 0x00, 0x02, + 0x20, // 120 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x00, + 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, + 0x06, // 121 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x06, 0x3E, 0x00, 0x00, 0x06, 0x37, 0x00, 0x00, + 0xC6, 0x33, 0x00, 0x00, 0xE6, 0x30, 0x00, 0x00, 0x76, 0x30, 0x00, 0x00, 0x3E, 0x30, 0x00, 0x00, 0x1E, 0x30, 0x00, 0x00, 0x06, + 0x30, // 122 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xC0, 0x03, 0x00, 0xC0, 0x7F, 0xFE, 0x03, 0xE0, 0x3F, 0xFC, 0x07, 0x60, + 0x00, 0x00, 0x06, 0x60, 0x00, 0x00, 0x06, // 123 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x0F, 0xE0, 0xFF, 0xFF, 0x0F, // 124 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x06, 0x60, 0x00, 0x00, 0x06, 0xE0, 0x3F, 0xFC, 0x07, 0xC0, 0x7F, 0xFF, 0x03, 0x00, + 0xC0, 0x03, 0x00, 0x00, 0x80, 0x01, // 125 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x60, // 126 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0x62, 0x00, 0x30, 0x00, 0x66, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x66, 0x00, + 0x30, 0x00, 0x62, 0x00, 0x30, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0F, 0x00, 0x00, 0x02, + 0x03, // 129 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, + 0x00, 0x30, 0x00, 0x62, 0x00, 0x30, 0x00, 0x66, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x66, 0x00, + 0x30, 0x00, 0xE2, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0E, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, + 0x01, // 130 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x62, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x66, 0x30, + 0x30, 0x00, 0x62, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 131 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, + 0x03, 0x00, 0x00, 0x02, 0x0E, 0x00, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x0C, 0x70, 0x00, 0x00, 0x0C, 0xE0, 0x01, 0x00, 0x06, 0x80, + 0x03, 0x00, 0x02, 0x00, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 132 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, + 0x30, 0x00, 0x00, 0x62, 0x30, 0x00, 0x00, 0x66, 0x30, 0x00, 0x00, 0x6C, 0x70, 0x00, 0x00, 0x6C, 0xF0, 0x00, 0x00, 0x66, 0xF0, + 0x03, 0x00, 0x62, 0xB0, 0x07, 0x00, 0xE0, 0x18, 0x1F, 0x00, 0xC0, 0x1F, 0x3C, 0x00, 0x80, 0x0F, 0x30, 0x00, 0x00, 0x00, + 0x20, // 133 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x07, 0x0F, 0x00, 0xC0, 0x1F, 0x1C, 0x00, 0xC0, 0x18, 0x18, 0x00, 0x62, + 0x38, 0x38, 0x00, 0x66, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x62, 0x70, + 0x30, 0x00, 0xC0, 0x60, 0x18, 0x00, 0xC0, 0xE1, 0x18, 0x00, 0x80, 0xC3, 0x0F, 0x00, 0x00, 0x83, 0x07, // 134 + 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x62, 0x00, 0x00, 0x00, 0x66, + 0x00, 0x00, 0x00, 0xEC, 0xFF, 0x3F, 0x00, 0xEC, 0xFF, 0x3F, 0x00, 0x66, 0x00, 0x00, 0x00, 0x62, 0x00, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, // 135 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x0E, 0x00, 0x30, 0x00, 0x1B, 0x00, 0x30, 0x00, 0x11, 0x00, 0x30, 0x00, 0x1B, 0x00, 0x30, 0x00, 0x0E, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 136 + 0x00, 0x00, 0x30, 0x00, 0x60, 0x00, 0x38, 0x00, 0x60, 0x00, 0x3C, 0x00, 0x60, 0x00, 0x37, 0x00, 0x60, 0x80, 0x33, 0x00, 0x62, + 0xC0, 0x31, 0x00, 0x66, 0xE0, 0x30, 0x00, 0x6C, 0x38, 0x30, 0x00, 0x6C, 0x1C, 0x30, 0x00, 0x66, 0x0E, 0x30, 0x00, 0x62, 0x07, + 0x30, 0x00, 0xE0, 0x01, 0x30, 0x00, 0xE0, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, // 137 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x20, 0x0E, 0x38, 0x00, 0x60, + 0x06, 0x30, 0x00, 0xC0, 0x06, 0x30, 0x00, 0xC0, 0x06, 0x30, 0x00, 0x60, 0x0E, 0x38, 0x00, 0x20, 0x1C, 0x1C, 0x00, 0x00, 0x18, + 0x0C, // 138 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, 0x18, 0x0C, 0x00, 0xE0, 0xFF, + 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0xE0, 0x01, // 139 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0x20, 0xCE, 0x38, 0x00, 0x60, + 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x30, 0x00, 0x60, 0xCE, 0x38, 0x00, 0x20, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 140 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x20, 0x18, 0x00, 0x00, 0x60, + 0x0C, 0x00, 0x00, 0xC0, 0x06, 0x00, 0x00, 0xC0, 0x06, 0x00, 0x00, 0x60, 0x06, 0x00, 0x00, 0x20, 0x0E, 0x00, 0x00, 0x00, 0xFC, + 0x3F, 0x00, 0x00, 0xF8, 0x3F, // 141 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0xFE, 0x3F, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0xC0, 0x0C, 0x00, 0x00, 0xC0, + 0x06, 0x00, 0x00, 0x60, 0x06, 0x00, 0x00, 0x20, 0x06, // 142 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x0C, 0x00, 0x00, 0x7C, 0x1C, 0x00, 0x20, 0xEE, 0x38, 0x00, 0x60, 0xC6, 0x30, 0x00, 0xC0, + 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x31, 0x00, 0x60, 0xC6, 0x31, 0x00, 0x20, 0x8E, 0x39, 0x00, 0x00, 0x9C, 0x1F, 0x00, 0x00, 0x18, + 0x0F, // 143 + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0xC0, 0xFF, 0x1F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0xE0, 0x01, // 144 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x70, + 0x00, 0x30, 0x00, 0xD8, 0x00, 0x30, 0x00, 0x88, 0x00, 0x30, 0x00, 0xD8, 0x00, 0x18, 0x00, 0x70, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 145 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x06, 0x3E, 0x00, 0x20, 0x06, 0x37, 0x00, 0x60, + 0xC6, 0x33, 0x00, 0xC0, 0xE6, 0x30, 0x00, 0xC0, 0x76, 0x30, 0x00, 0x60, 0x3E, 0x30, 0x00, 0x20, 0x1E, 0x30, 0x00, 0x00, 0x06, + 0x30, // 146 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE8, 0xFF, 0x3F, 0x00, 0x0E, 0x00, 0x30, 0x00, 0x06, + 0x00, 0x30, 0x00, 0x02, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x30, // 147 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE8, 0xFF, 0x3F, 0x00, 0xEE, 0xFF, 0x3F, 0x00, 0x06, 0x00, 0x00, 0x00, + 0x02, // 148 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x60, 0x03, 0x30, 0x00, 0xE0, 0x01, + 0x30, 0x00, 0x00, 0x00, 0x30, // 149 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0x03, 0x00, 0x00, 0xE0, 0x01, // 150 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, + 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x68, 0x70, 0x00, 0x00, 0x6E, 0xF0, 0x00, 0x00, 0x66, 0xF0, + 0x03, 0x00, 0x62, 0xB0, 0x07, 0x00, 0xE0, 0x18, 0x1F, 0x00, 0xC0, 0x1F, 0x3C, 0x00, 0x80, 0x0F, 0x30, 0x00, 0x00, 0x00, + 0x20, // 151 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x80, 0x0C, 0x00, 0x00, 0xE0, + 0x06, 0x00, 0x00, 0x60, 0x06, 0x00, 0x00, 0x20, 0x06, // 152 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE6, 0xFF, 0x07, 0x00, 0xE6, 0xFF, 0x07, // 161 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x9C, 0x07, 0x00, 0x0E, 0x78, 0x00, 0x00, + 0x06, 0x3F, 0x00, 0x00, 0xF6, 0x30, 0x00, 0x00, 0x0E, 0x30, 0x00, 0xE0, 0x0D, 0x1C, 0x00, 0x00, 0x1C, 0x0E, 0x00, 0x00, 0x10, + 0x06, // 162 + 0x00, 0x60, 0x10, 0x00, 0x00, 0x60, 0x38, 0x00, 0x00, 0x7F, 0x1C, 0x00, 0xC0, 0xFF, 0x1F, 0x00, 0xE0, 0xE0, 0x19, 0x00, 0x60, + 0x60, 0x18, 0x00, 0x60, 0x60, 0x18, 0x00, 0x60, 0x60, 0x30, 0x00, 0xE0, 0x00, 0x30, 0x00, 0xC0, 0x01, 0x30, 0x00, 0x80, 0x01, + 0x38, 0x00, 0x00, 0x00, 0x10, // 163 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x04, 0x00, 0x00, 0xF7, 0x0E, 0x00, 0x00, 0xFE, 0x07, 0x00, 0x00, 0x0C, 0x03, 0x00, 0x00, + 0x06, 0x06, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x06, 0x06, 0x00, 0x00, 0x0C, 0x03, 0x00, 0x00, 0xFE, + 0x07, 0x00, 0x00, 0xF7, 0x0E, 0x00, 0x00, 0x02, 0x04, // 164 + 0xE0, 0x60, 0x06, 0x00, 0xC0, 0x61, 0x06, 0x00, 0x80, 0x67, 0x06, 0x00, 0x00, 0x7E, 0x06, 0x00, 0x00, 0x7C, 0x06, 0x00, 0x00, + 0xF0, 0x3F, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x7C, 0x06, 0x00, 0x00, 0x7E, 0x06, 0x00, 0x80, 0x67, 0x06, 0x00, 0xC0, 0x61, + 0x06, 0x00, 0xE0, 0x60, 0x06, 0x00, 0x20, // 165 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x7F, 0xF8, 0x0F, 0xE0, 0x7F, 0xF8, 0x0F, // 166 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x80, 0xF3, 0xC1, 0x00, 0xC0, 0x1F, 0xC3, 0x03, 0xE0, 0x0C, 0x07, 0x03, 0x60, + 0x1C, 0x06, 0x06, 0x60, 0x18, 0x0C, 0x06, 0x60, 0x30, 0x1C, 0x06, 0xE0, 0x70, 0x38, 0x07, 0xC0, 0xE1, 0xF4, 0x03, 0x80, 0xC1, + 0xE7, 0x01, 0x00, 0x80, 0x03, // 167 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, + 0x00, 0x00, 0x00, 0x60, // 168 + 0x00, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0x07, 0x07, 0x00, 0x80, 0x01, 0x0C, 0x00, 0xC0, 0x79, 0x1C, 0x00, 0xC0, + 0xFE, 0x19, 0x00, 0x60, 0x86, 0x31, 0x00, 0x60, 0x03, 0x33, 0x00, 0x60, 0x03, 0x33, 0x00, 0x60, 0x03, 0x33, 0x00, 0x60, 0x03, + 0x33, 0x00, 0x60, 0x87, 0x33, 0x00, 0xC0, 0x86, 0x19, 0x00, 0xC0, 0x85, 0x1C, 0x00, 0x80, 0x01, 0x0C, 0x00, 0x00, 0x07, 0x07, + 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xF8, // 169 + 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1C, 0x00, 0x00, 0xE0, 0x3E, 0x00, 0x00, 0x60, 0x32, 0x00, 0x00, 0x60, 0x32, 0x00, 0x00, 0xE0, + 0x3F, 0x00, 0x00, 0xC0, 0x3F, // 170 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x78, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, + 0x84, 0x10, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x78, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x04, 0x10, // 171 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0xFC, + 0x01, 0x00, 0x00, 0xFC, 0x01, // 172 + 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 173 + 0x00, 0xF8, 0x00, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0x07, 0x07, 0x00, 0x80, 0x01, 0x0C, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0xFE, 0x1B, 0x00, 0x60, 0xFE, 0x33, 0x00, 0x60, 0x66, 0x30, 0x00, 0x60, 0x66, 0x30, 0x00, 0x60, 0xE6, 0x30, 0x00, 0x60, 0xFE, + 0x31, 0x00, 0x60, 0x3C, 0x33, 0x00, 0xC0, 0x00, 0x1A, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x01, 0x0C, 0x00, 0x00, 0x07, 0x07, + 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xF8, // 174 + 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, + 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, + 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, // 175 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x40, 0x04, 0x00, 0x00, 0x20, 0x08, 0x00, 0x00, 0x20, 0x08, 0x00, 0x00, 0x20, + 0x08, 0x00, 0x00, 0x40, 0x04, 0x00, 0x00, 0x80, 0x03, // 176 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, + 0x60, 0x30, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0xFF, 0x3F, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, + 0x30, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x60, 0x30, // 177 + 0x40, 0x20, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x20, 0x38, 0x00, 0x00, 0x20, 0x2C, 0x00, 0x00, 0x20, 0x26, 0x00, 0x00, 0xE0, + 0x23, 0x00, 0x00, 0xC0, 0x21, // 178 + 0x40, 0x10, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x20, 0x20, 0x00, 0x00, 0x20, 0x22, 0x00, 0x00, 0x20, 0x22, 0x00, 0x00, 0xE0, + 0x3D, 0x00, 0x00, 0xC0, 0x1D, // 179 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x60, + 0x00, 0x00, 0x00, 0x20, // 180 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0xFF, 0x07, 0x00, 0xFE, 0xFF, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 181 + 0x00, 0x0F, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x00, 0xE0, + 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x60, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, + 0xFF, 0x07, 0x60, 0x00, 0x00, 0x00, 0x60, // 182 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x60, // 183 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0xC0, 0x02, 0x00, 0x00, 0x80, 0x03, 0x00, + 0x00, 0x00, 0x01, // 184 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xE0, + 0x3F, // 185 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x38, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0xE0, + 0x38, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0x80, 0x0F, // 186 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x10, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, + 0x78, 0x0F, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x84, 0x10, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x78, 0x0F, 0x00, 0x00, 0xE0, + 0x03, 0x00, 0x00, 0x80, // 187 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x20, 0x00, 0xE0, 0x3F, 0x38, 0x00, 0xE0, + 0x3F, 0x1C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x38, + 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x07, 0x0C, 0x00, 0xC0, 0x01, 0x0E, 0x00, 0xE0, 0x80, 0x0B, + 0x00, 0x60, 0xC0, 0x08, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x00, 0x08, // 188 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x20, 0x00, 0xE0, 0x3F, 0x30, 0x00, 0xE0, + 0x3F, 0x1C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x70, + 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x4E, 0x20, 0x00, 0x00, 0x67, 0x30, 0x00, 0xC0, 0x21, 0x38, 0x00, 0xE0, 0x20, 0x2C, + 0x00, 0x60, 0x20, 0x26, 0x00, 0x00, 0xE0, 0x27, 0x00, 0x00, 0xC0, 0x21, // 189 + 0x40, 0x10, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0x20, 0x20, 0x00, 0x00, 0x20, 0x22, 0x20, 0x00, 0x20, 0x22, 0x30, 0x00, 0xE0, + 0x3D, 0x38, 0x00, 0xC0, 0x1D, 0x0E, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x70, + 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x0E, 0x0C, 0x00, 0x00, 0x07, 0x0E, 0x00, 0x80, 0x83, 0x0B, 0x00, 0xE0, 0xC0, 0x08, + 0x00, 0x60, 0xE0, 0x3F, 0x00, 0x20, 0xE0, 0x3F, 0x00, 0x00, 0x00, 0x08, // 190 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x1E, 0x03, 0x00, + 0x00, 0x07, 0x07, 0x00, 0xE6, 0x03, 0x06, 0x00, 0xE6, 0x01, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, + 0x80, 0x03, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xC0, // 191 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x82, + 0x8F, 0x01, 0x00, 0xE6, 0x83, 0x01, 0x00, 0x6E, 0x80, 0x01, 0x00, 0xE8, 0x83, 0x01, 0x00, 0x80, 0x8F, 0x01, 0x00, 0x00, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 192 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x80, + 0x8F, 0x01, 0x00, 0xE8, 0x83, 0x01, 0x00, 0x6E, 0x80, 0x01, 0x00, 0xE6, 0x83, 0x01, 0x00, 0x82, 0x8F, 0x01, 0x00, 0x00, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 193 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x88, + 0x8F, 0x01, 0x00, 0xEC, 0x83, 0x01, 0x00, 0x66, 0x80, 0x01, 0x00, 0xE6, 0x83, 0x01, 0x00, 0x8C, 0x8F, 0x01, 0x00, 0x08, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 194 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x0C, 0xFE, 0x01, 0x00, 0x8E, + 0x8F, 0x01, 0x00, 0xE6, 0x83, 0x01, 0x00, 0x66, 0x80, 0x01, 0x00, 0xEC, 0x83, 0x01, 0x00, 0x8C, 0x8F, 0x01, 0x00, 0x0E, 0xFE, + 0x01, 0x00, 0x06, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 195 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x8C, + 0x8F, 0x01, 0x00, 0xEC, 0x83, 0x01, 0x00, 0x60, 0x80, 0x01, 0x00, 0xE0, 0x83, 0x01, 0x00, 0x8C, 0x8F, 0x01, 0x00, 0x0C, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 196 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x9C, + 0x8F, 0x01, 0x00, 0xE2, 0x83, 0x01, 0x00, 0x62, 0x80, 0x01, 0x00, 0xE2, 0x83, 0x01, 0x00, 0x9C, 0x8F, 0x01, 0x00, 0x00, 0xFE, + 0x01, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x30, // 197 + 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, + 0xBC, 0x01, 0x00, 0x00, 0x8F, 0x01, 0x00, 0xC0, 0x83, 0x01, 0x00, 0xE0, 0x80, 0x01, 0x00, 0x60, 0x80, 0x01, 0x00, 0x60, 0x80, + 0x01, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, + 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, + 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 198 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0x60, 0x00, 0x30, 0x02, 0x60, 0x00, 0x30, 0x02, 0x60, 0x00, 0xF0, 0x02, 0x60, 0x00, 0xB0, 0x03, 0x60, 0x00, + 0x30, 0x01, 0x60, 0x00, 0x30, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0F, 0x00, 0x00, 0x02, + 0x03, // 199 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x62, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x6E, 0x30, 0x30, 0x00, 0x68, 0x30, 0x30, 0x00, 0x60, 0x30, + 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 200 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x68, 0x30, 0x30, 0x00, 0x6E, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x62, 0x30, + 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 201 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x68, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x66, 0x30, 0x30, 0x00, 0x6C, 0x30, + 0x30, 0x00, 0x68, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 202 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x6C, 0x30, + 0x30, 0x00, 0x6C, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, // 203 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0xE6, 0xFF, 0x3F, 0x00, 0xEE, 0xFF, 0x3F, 0x00, 0x08, // 204 + 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x00, 0xEE, 0xFF, 0x3F, 0x00, 0xE6, 0xFF, 0x3F, 0x00, 0x02, // 205 + 0x08, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0xE6, 0xFF, 0x3F, 0x00, 0xE6, 0xFF, 0x3F, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x08, // 206 + 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x0C, 0x00, 0x00, 0x00, + 0x0C, // 207 + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, + 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x30, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x30, 0x00, 0xE0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x03, 0x0E, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, + 0x01, // 208 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x8C, + 0x03, 0x00, 0x00, 0x0E, 0x0E, 0x00, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x06, 0x70, 0x00, 0x00, 0x0C, 0xE0, 0x01, 0x00, 0x0C, 0x80, + 0x03, 0x00, 0x0E, 0x00, 0x0F, 0x00, 0x06, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, // 209 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x62, 0x00, 0x30, 0x00, 0x66, 0x00, 0x30, 0x00, 0x6E, 0x00, 0x30, 0x00, 0x68, 0x00, + 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0xE0, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 210 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x60, 0x00, 0x30, 0x00, 0x68, 0x00, 0x30, 0x00, 0x6E, 0x00, 0x30, 0x00, 0x66, 0x00, + 0x30, 0x00, 0x62, 0x00, 0x30, 0x00, 0xE0, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 211 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x68, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x66, 0x00, 0x30, 0x00, 0x66, 0x00, + 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0xE8, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 212 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xCC, + 0x00, 0x18, 0x00, 0xEE, 0x00, 0x38, 0x00, 0x66, 0x00, 0x30, 0x00, 0x66, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x6C, 0x00, + 0x30, 0x00, 0x6E, 0x00, 0x30, 0x00, 0xE6, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 213 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFF, 0x07, 0x00, 0x80, 0x07, 0x0F, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0xC0, + 0x00, 0x18, 0x00, 0xE0, 0x00, 0x38, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, + 0x30, 0x00, 0x6C, 0x00, 0x30, 0x00, 0xEC, 0x00, 0x38, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x01, 0x1C, 0x00, 0x80, 0x07, 0x0F, + 0x00, 0x00, 0xFF, 0x07, 0x00, 0x00, 0xFC, 0x01, // 214 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x03, 0x00, 0x00, 0x8E, 0x03, 0x00, 0x00, 0xDC, 0x01, 0x00, 0x00, + 0xF8, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xDC, 0x01, 0x00, 0x00, 0x8E, 0x03, 0x00, 0x00, 0x06, + 0x03, // 215 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xFC, 0x21, 0x00, 0x00, 0xFF, 0x77, 0x00, 0x80, 0x07, 0x3F, 0x00, 0xC0, 0x01, 0x1E, 0x00, 0xC0, + 0x00, 0x1F, 0x00, 0xE0, 0x80, 0x3B, 0x00, 0x60, 0xC0, 0x31, 0x00, 0x60, 0xE0, 0x30, 0x00, 0x60, 0x70, 0x30, 0x00, 0x60, 0x38, + 0x30, 0x00, 0x60, 0x1C, 0x30, 0x00, 0xE0, 0x0E, 0x38, 0x00, 0xC0, 0x07, 0x18, 0x00, 0xC0, 0x03, 0x1C, 0x00, 0xE0, 0x07, 0x0F, + 0x00, 0x70, 0xFF, 0x07, 0x00, 0x20, 0xFC, 0x01, // 216 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x02, 0x00, 0x30, 0x00, 0x06, 0x00, 0x30, 0x00, 0x0E, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 217 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x00, 0x00, 0x30, 0x00, 0x08, 0x00, 0x30, 0x00, 0x0E, 0x00, 0x30, 0x00, 0x06, 0x00, 0x30, 0x00, 0x02, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 218 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x08, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x30, 0x00, 0x06, 0x00, 0x30, 0x00, 0x06, 0x00, 0x30, 0x00, 0x0C, 0x00, + 0x30, 0x00, 0x08, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 219 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x03, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, + 0x00, 0x38, 0x00, 0x0C, 0x00, 0x30, 0x00, 0x0C, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x0C, 0x00, + 0x30, 0x00, 0x0C, 0x00, 0x38, 0x00, 0x00, 0x00, 0x1C, 0x00, 0xE0, 0xFF, 0x0F, 0x00, 0xE0, 0xFF, 0x03, // 220 + 0x20, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x1E, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x08, 0xF0, 0x3F, 0x00, 0x0E, 0xF0, 0x3F, 0x00, 0x06, 0x3C, 0x00, 0x00, 0x02, 0x1E, + 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x20, // 221 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0xE0, 0xFF, 0x3F, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, + 0x03, 0x06, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0x03, 0x06, 0x00, 0x00, 0x03, + 0x06, 0x00, 0x00, 0x03, 0x07, 0x00, 0x00, 0x86, 0x03, 0x00, 0x00, 0xFE, 0x01, 0x00, 0x00, 0xF8, // 222 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0x3F, 0x00, 0xC0, 0xFF, 0x3F, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x60, + 0x00, 0x08, 0x00, 0x60, 0x00, 0x1C, 0x00, 0x60, 0x00, 0x38, 0x00, 0xE0, 0x78, 0x30, 0x00, 0xC0, 0x7F, 0x30, 0x00, 0x80, 0xC7, + 0x30, 0x00, 0x00, 0x80, 0x39, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0x0F, // 223 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0x00, 0x8C, 0x39, 0x00, 0x20, 0x86, 0x31, 0x00, 0x60, + 0x86, 0x31, 0x00, 0xE0, 0xC6, 0x30, 0x00, 0x80, 0xC6, 0x18, 0x00, 0x00, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 224 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0x00, 0x8C, 0x39, 0x00, 0x00, 0x86, 0x31, 0x00, 0x80, + 0x86, 0x31, 0x00, 0xE0, 0xC6, 0x30, 0x00, 0x60, 0xC6, 0x18, 0x00, 0x20, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 225 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0x80, 0x8C, 0x39, 0x00, 0xC0, 0x86, 0x31, 0x00, 0x60, + 0x86, 0x31, 0x00, 0x60, 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x18, 0x00, 0x80, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 226 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0xC0, 0x1C, 0x1F, 0x00, 0xE0, 0x8C, 0x39, 0x00, 0x60, 0x86, 0x31, 0x00, 0x60, + 0x86, 0x31, 0x00, 0xC0, 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x18, 0x00, 0xE0, 0xCE, 0x0C, 0x00, 0x60, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 227 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0xC0, 0x8C, 0x39, 0x00, 0xC0, 0x86, 0x31, 0x00, 0x00, + 0x86, 0x31, 0x00, 0x00, 0xC6, 0x30, 0x00, 0xC0, 0xC6, 0x18, 0x00, 0xC0, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 228 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x0E, 0x00, 0x00, 0x1C, 0x1F, 0x00, 0x00, 0x8C, 0x39, 0x00, 0x70, 0x86, 0x31, 0x00, 0x88, + 0x86, 0x31, 0x00, 0x88, 0xC6, 0x30, 0x00, 0x88, 0xC6, 0x18, 0x00, 0x70, 0xCE, 0x0C, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF8, + 0x3F, 0x00, 0x00, 0x00, 0x20, // 229 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x0F, 0x00, 0x00, 0x9C, 0x1F, 0x00, 0x00, 0xCC, 0x39, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, + 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0x66, 0x18, 0x00, 0x00, 0x6E, 0x1C, 0x00, 0x00, 0xFC, + 0x0F, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xCC, 0x1C, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, + 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xCC, 0x18, 0x00, 0x00, 0xF8, 0x0C, 0x00, 0x00, 0xE0, 0x04, // 230 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x02, 0x00, + 0x06, 0x30, 0x02, 0x00, 0x06, 0xF0, 0x02, 0x00, 0x06, 0xB0, 0x03, 0x00, 0x0E, 0x38, 0x01, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x18, + 0x0C, // 231 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0x20, 0xCE, 0x38, 0x00, 0x60, + 0xC6, 0x30, 0x00, 0xE0, 0xC6, 0x30, 0x00, 0x80, 0xC6, 0x30, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x00, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 232 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x80, + 0xC6, 0x30, 0x00, 0xE0, 0xC6, 0x30, 0x00, 0x60, 0xC6, 0x30, 0x00, 0x20, 0xCE, 0x38, 0x00, 0x00, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 233 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0x80, 0xCE, 0x38, 0x00, 0xC0, + 0xC6, 0x30, 0x00, 0x60, 0xC6, 0x30, 0x00, 0x60, 0xC6, 0x30, 0x00, 0xC0, 0xCE, 0x38, 0x00, 0x80, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 234 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xDC, 0x1C, 0x00, 0xC0, 0xCE, 0x38, 0x00, 0xC0, + 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0x00, 0xC6, 0x30, 0x00, 0xC0, 0xCE, 0x38, 0x00, 0xC0, 0xDC, 0x18, 0x00, 0x00, 0xF8, + 0x0C, 0x00, 0x00, 0xF0, 0x04, // 235 + 0x00, 0x00, 0x00, 0x00, 0x20, 0x00, 0x00, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0xE0, 0xFE, 0x3F, 0x00, 0x80, // 236 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xE0, 0xFE, 0x3F, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0x20, // 237 + 0x80, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0x60, 0xFE, 0x3F, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0x80, // 238 + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, // 239 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1D, 0x1C, 0x00, 0xA0, 0x0F, 0x38, 0x00, 0xA0, + 0x06, 0x30, 0x00, 0xE0, 0x06, 0x30, 0x00, 0xC0, 0x06, 0x30, 0x00, 0xC0, 0x0F, 0x38, 0x00, 0x20, 0x1F, 0x1C, 0x00, 0x00, 0xFC, + 0x0F, 0x00, 0x00, 0xE0, 0x07, // 240 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0xC0, 0xFE, 0x3F, 0x00, 0xE0, 0x18, 0x00, 0x00, 0x60, + 0x0C, 0x00, 0x00, 0x60, 0x06, 0x00, 0x00, 0xC0, 0x06, 0x00, 0x00, 0xC0, 0x06, 0x00, 0x00, 0xE0, 0x0E, 0x00, 0x00, 0x60, 0xFC, + 0x3F, 0x00, 0x00, 0xF8, 0x3F, // 241 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x20, 0x0E, 0x38, 0x00, 0x60, + 0x06, 0x30, 0x00, 0xE0, 0x06, 0x30, 0x00, 0x80, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 242 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x80, + 0x06, 0x30, 0x00, 0xE0, 0x06, 0x30, 0x00, 0x60, 0x06, 0x30, 0x00, 0x20, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 243 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x80, 0x0E, 0x38, 0x00, 0xC0, + 0x06, 0x30, 0x00, 0x60, 0x06, 0x30, 0x00, 0x60, 0x06, 0x30, 0x00, 0xC0, 0x0E, 0x38, 0x00, 0x80, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 244 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0xC0, 0x1C, 0x1C, 0x00, 0xE0, 0x0E, 0x38, 0x00, 0x60, + 0x06, 0x30, 0x00, 0x60, 0x06, 0x30, 0x00, 0xC0, 0x06, 0x30, 0x00, 0xC0, 0x0E, 0x38, 0x00, 0xE0, 0x1C, 0x1C, 0x00, 0x60, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 245 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0xC0, 0x0E, 0x38, 0x00, 0xC0, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0xC0, 0x0E, 0x38, 0x00, 0xC0, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x07, // 246 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0xB6, 0x01, 0x00, 0x00, 0xB6, 0x01, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, + 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, // 247 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x67, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, + 0x0E, 0x3F, 0x00, 0x00, 0x86, 0x33, 0x00, 0x00, 0xE6, 0x31, 0x00, 0x00, 0x76, 0x30, 0x00, 0x00, 0x3E, 0x38, 0x00, 0x00, 0x1C, + 0x1C, 0x00, 0x00, 0xFF, 0x0F, 0x00, 0x00, 0xF3, 0x07, // 248 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x20, 0x00, 0x38, 0x00, 0x60, + 0x00, 0x30, 0x00, 0xE0, 0x00, 0x30, 0x00, 0x80, 0x00, 0x30, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 249 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, + 0x00, 0x30, 0x00, 0x80, 0x00, 0x30, 0x00, 0xE0, 0x00, 0x30, 0x00, 0x60, 0x00, 0x18, 0x00, 0x20, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 250 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x80, 0x00, 0x38, 0x00, 0xC0, + 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0x60, 0x00, 0x30, 0x00, 0xC0, 0x00, 0x18, 0x00, 0x80, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 251 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0xC0, 0x00, 0x38, 0x00, 0xC0, + 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0xC0, 0x00, 0x18, 0x00, 0xC0, 0x00, 0x0C, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xFE, 0x3F, // 252 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0x00, 0xF0, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x07, 0x80, + 0x00, 0xFE, 0x03, 0xE0, 0x00, 0xFC, 0x00, 0x60, 0xC0, 0x1F, 0x00, 0x20, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, + 0x06, // 253 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xFF, 0xFF, 0x07, 0xE0, 0xFF, 0xFF, 0x07, 0x00, 0x1C, 0x18, 0x00, 0x00, + 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, + 0x0F, 0x00, 0x00, 0xF0, 0x03, // 254 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x06, 0xC0, 0xF0, 0x01, 0x06, 0xC0, 0x80, 0x0F, 0x07, 0x00, + 0x00, 0xFE, 0x03, 0x00, 0x00, 0xFC, 0x00, 0xC0, 0xC0, 0x1F, 0x00, 0xC0, 0xF8, 0x03, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, + 0x06, // 255 +}; \ No newline at end of file diff --git a/src/graphics/fonts/OLEDDisplayFontsCS.h b/src/graphics/fonts/OLEDDisplayFontsCS.h new file mode 100644 index 000000000..322fbc936 --- /dev/null +++ b/src/graphics/fonts/OLEDDisplayFontsCS.h @@ -0,0 +1,16 @@ +#ifndef OLEDDISPLAYFONTSCS_h +#define OLEDDISPLAYFONTSCS_h + +#ifdef ARDUINO +#include +#elif __MBED__ +#define PROGMEM +#endif + +/** + * Localization for Czech and Slovak language containing glyphs with diacritic. + */ +extern const uint8_t ArialMT_Plain_10_CS[] PROGMEM; +extern const uint8_t ArialMT_Plain_16_CS[] PROGMEM; +extern const uint8_t ArialMT_Plain_24_CS[] PROGMEM; +#endif \ No newline at end of file diff --git a/src/graphics/fonts/OLEDDisplayFontsUA.cpp b/src/graphics/fonts/OLEDDisplayFontsUA.cpp index 0295ee6ba..2a97526ef 100644 --- a/src/graphics/fonts/OLEDDisplayFontsUA.cpp +++ b/src/graphics/fonts/OLEDDisplayFontsUA.cpp @@ -166,71 +166,71 @@ const uint8_t ArialMT_Plain_10_UA[] PROGMEM = { 0x04, 0x6F, 0x10, 0x09, // 188 0x04, 0x7F, 0x10, 0x09, // 189 0x04, 0x8F, 0x10, 0x09, // 190 - 0x04, 0x9F, 0x0A, 0x06, // 191 - 0x04, 0xA9, 0x0C, 0x07, // 192 - 0x04, 0xB5, 0x0C, 0x07, // 193 - 0x04, 0xC1, 0x0C, 0x07, // 194 - 0x04, 0xCD, 0x0B, 0x07, // 195 - 0x04, 0xD8, 0x0C, 0x07, // 196 - 0x04, 0xE4, 0x0C, 0x07, // 197 - 0x04, 0xF0, 0x0C, 0x07, // 198 - 0x04, 0xFC, 0x0C, 0x07, // 199 - 0x05, 0x08, 0x0C, 0x07, // 200 - 0x05, 0x14, 0x0C, 0x07, // 201 - 0x05, 0x20, 0x0C, 0x07, // 202 - 0x05, 0x2C, 0x0C, 0x07, // 203 - 0x05, 0x38, 0x0C, 0x07, // 204 - 0x05, 0x44, 0x0C, 0x07, // 205 - 0x05, 0x50, 0x0C, 0x07, // 206 - 0x05, 0x5C, 0x0C, 0x07, // 207 - 0x05, 0x68, 0x0B, 0x07, // 208 - 0x05, 0x73, 0x0C, 0x07, // 209 - 0x05, 0x7F, 0x0B, 0x07, // 210 - 0x05, 0x8A, 0x0C, 0x07, // 211 - 0x05, 0x96, 0x0B, 0x07, // 212 - 0x05, 0xA1, 0x0C, 0x07, // 213 - 0x05, 0xAD, 0x0C, 0x07, // 214 - 0x05, 0xB9, 0x0C, 0x07, // 215 - 0x05, 0xC5, 0x0C, 0x07, // 216 - 0x05, 0xD1, 0x0E, 0x08, // 217 - 0x05, 0xDF, 0x0C, 0x07, // 218 - 0x05, 0xEB, 0x0C, 0x07, // 219 - 0x05, 0xF7, 0x0C, 0x07, // 220 - 0x06, 0x03, 0x0C, 0x07, // 221 - 0x06, 0x0F, 0x0C, 0x07, // 222 - 0x06, 0x1B, 0x0C, 0x07, // 223 - 0x06, 0x27, 0x0C, 0x07, // 224 - 0x06, 0x33, 0x0C, 0x07, // 225 - 0x06, 0x3F, 0x0C, 0x07, // 226 - 0x06, 0x4B, 0x0B, 0x07, // 227 - 0x06, 0x56, 0x0C, 0x07, // 228 - 0x06, 0x62, 0x0B, 0x07, // 229 - 0x06, 0x6D, 0x0C, 0x07, // 230 - 0x06, 0x79, 0x0C, 0x07, // 231 - 0x06, 0x85, 0x0C, 0x07, // 232 - 0x06, 0x91, 0x0C, 0x07, // 233 - 0x06, 0x9D, 0x0C, 0x07, // 234 - 0x06, 0xA9, 0x0C, 0x07, // 235 - 0x06, 0xB5, 0x0C, 0x07, // 236 - 0x06, 0xC1, 0x0C, 0x07, // 237 - 0x06, 0xCD, 0x0C, 0x07, // 238 - 0x06, 0xD9, 0x0C, 0x07, // 239 - 0x06, 0xE5, 0x0B, 0x07, // 240 - 0x06, 0xF0, 0x0C, 0x07, // 241 - 0x06, 0xFC, 0x0B, 0x07, // 242 - 0x07, 0x07, 0x0C, 0x07, // 243 - 0x07, 0x13, 0x0B, 0x07, // 244 - 0x07, 0x1E, 0x0C, 0x07, // 245 - 0x07, 0x2A, 0x0C, 0x07, // 246 - 0x07, 0x36, 0x0C, 0x07, // 247 - 0x07, 0x42, 0x0C, 0x07, // 248 - 0x07, 0x4E, 0x0E, 0x08, // 249 - 0x07, 0x5C, 0x0C, 0x07, // 250 - 0x07, 0x68, 0x0C, 0x07, // 251 - 0x07, 0x74, 0x0C, 0x07, // 252 - 0x07, 0x80, 0x0C, 0x07, // 253 - 0x07, 0x8C, 0x0C, 0x07, // 254 - 0x07, 0x98, 0x0C, 0x07, // 255 + 0x04, 0x9F, 0x06, 0x04, // 191 + 0x04, 0xA5, 0x0A, 0x06, // 192 + 0x04, 0xAF, 0x0A, 0x06, // 193 + 0x04, 0xB9, 0x0A, 0x06, // 194 + 0x04, 0xC3, 0x09, 0x06, // 195 + 0x04, 0xCC, 0x0A, 0x06, // 196 + 0x04, 0xD6, 0x0A, 0x06, // 197 + 0x04, 0xE0, 0x0A, 0x06, // 198 + 0x04, 0xEA, 0x08, 0x05, // 199 + 0x04, 0xF2, 0x0A, 0x06, // 200 + 0x04, 0xFC, 0x0A, 0x06, // 201 + 0x05, 0x06, 0x0A, 0x06, // 202 + 0x05, 0x10, 0x0A, 0x06, // 203 + 0x05, 0x1A, 0x0A, 0x06, // 204 + 0x05, 0x24, 0x0A, 0x06, // 205 + 0x05, 0x2E, 0x0A, 0x06, // 206 + 0x05, 0x38, 0x0A, 0x06, // 207 + 0x05, 0x42, 0x09, 0x06, // 208 + 0x05, 0x4B, 0x0A, 0x06, // 209 + 0x05, 0x55, 0x09, 0x06, // 210 + 0x05, 0x5E, 0x0A, 0x06, // 211 + 0x05, 0x68, 0x09, 0x06, // 212 + 0x05, 0x71, 0x0A, 0x06, // 213 + 0x05, 0x7B, 0x0A, 0x06, // 214 + 0x05, 0x85, 0x08, 0x05, // 215 + 0x05, 0x8D, 0x0A, 0x06, // 216 + 0x05, 0x97, 0x0C, 0x07, // 217 + 0x05, 0xA3, 0x0A, 0x06, // 218 + 0x05, 0xAD, 0x0A, 0x06, // 219 + 0x05, 0xB7, 0x08, 0x05, // 220 + 0x05, 0xBF, 0x0A, 0x06, // 221 + 0x05, 0xC9, 0x0A, 0x06, // 222 + 0x05, 0xD3, 0x0A, 0x06, // 223 + 0x05, 0xDD, 0x08, 0x05, // 224 + 0x05, 0xE5, 0x08, 0x05, // 225 + 0x05, 0xED, 0x08, 0x05, // 226 + 0x05, 0xF5, 0x07, 0x05, // 227 + 0x05, 0xFC, 0x0A, 0x06, // 228 + 0x06, 0x06, 0x09, 0x06, // 229 + 0x06, 0x0F, 0x0A, 0x06, // 230 + 0x06, 0x19, 0x08, 0x05, // 231 + 0x06, 0x21, 0x0A, 0x06, // 232 + 0x06, 0x2B, 0x0A, 0x06, // 233 + 0x06, 0x35, 0x06, 0x04, // 234 + 0x06, 0x3B, 0x08, 0x05, // 235 + 0x06, 0x43, 0x0A, 0x06, // 236 + 0x06, 0x4D, 0x08, 0x05, // 237 + 0x06, 0x55, 0x08, 0x05, // 238 + 0x06, 0x5D, 0x08, 0x05, // 239 + 0x06, 0x65, 0x05, 0x04, // 240 + 0x06, 0x6A, 0x08, 0x05, // 241 + 0x06, 0x72, 0x05, 0x04, // 242 + 0x06, 0x77, 0x08, 0x05, // 243 + 0x06, 0x7F, 0x09, 0x06, // 244 + 0x06, 0x88, 0x0A, 0x06, // 245 + 0x06, 0x92, 0x08, 0x05, // 246 + 0x06, 0x9A, 0x08, 0x05, // 247 + 0x06, 0xA2, 0x0A, 0x06, // 248 + 0x06, 0xAC, 0x0C, 0x07, // 249 + 0x06, 0xB8, 0x08, 0x05, // 250 + 0x06, 0xC0, 0x08, 0x05, // 251 + 0x06, 0xC8, 0x08, 0x05, // 252 + 0x06, 0xD0, 0x08, 0x05, // 253 + 0x06, 0xD8, 0x0A, 0x06, // 254 + 0x06, 0xE2, 0x08, 0x05, // 255 // Font Data: 0x00, 0x00, 0xF8, 0x02, // 33 0x38, 0x00, 0x00, 0x00, 0x38, // 34 @@ -356,69 +356,1568 @@ const uint8_t ArialMT_Plain_10_UA[] PROGMEM = { 0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0xC0, 0x00, 0x20, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 188 0x00, 0x00, 0x10, 0x02, 0x78, 0x01, 0x80, 0x00, 0x60, 0x00, 0x50, 0x02, 0x48, 0x03, 0xC0, 0x02, // 189 0x48, 0x00, 0x58, 0x00, 0x68, 0x03, 0x80, 0x00, 0x60, 0x01, 0x90, 0x01, 0xC8, 0x03, 0x00, 0x01, // 190 - 0x00, 0x00, 0x00, 0x00, 0x28, 0x02, 0xE0, 0x03, 0x28, 0x02, // 191 - 0x00, 0x00, 0xF0, 0x03, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x03, // 192 - 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x88, 0x01, // 193 - 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 194 - 0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x18, // 195 - 0x00, 0x00, 0x00, 0x02, 0xFC, 0x03, 0x04, 0x02, 0xFC, 0x03, 0x00, 0x02, // 196 - 0x00, 0x00, 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x08, 0x02, // 197 - 0x00, 0x00, 0xB8, 0x03, 0x40, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xB8, 0x03, // 198 - 0x00, 0x00, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 199 - 0x00, 0x00, 0xF8, 0x03, 0x80, 0x00, 0x40, 0x00, 0x20, 0x00, 0xF8, 0x03, // 200 - 0x00, 0x00, 0xE0, 0x03, 0x08, 0x01, 0x90, 0x00, 0x48, 0x00, 0xE0, 0x03, // 201 - 0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xA0, 0x00, 0x10, 0x01, 0x08, 0x02, // 202 - 0x00, 0x00, 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 203 - 0x00, 0x00, 0xF8, 0x03, 0x10, 0x00, 0x60, 0x00, 0x10, 0x00, 0xF8, 0x03, // 204 - 0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 205 - 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 206 - 0x00, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 207 - 0x00, 0x00, 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 208 - 0x00, 0x00, 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, // 209 - 0x00, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, // 210 - 0x00, 0x00, 0x38, 0x00, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0xF8, 0x01, // 211 - 0x00, 0x00, 0x70, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x88, 0x00, 0x70, // 212 - 0x00, 0x00, 0x18, 0x03, 0xA0, 0x00, 0x40, 0x00, 0xA0, 0x00, 0x18, 0x03, // 213 - 0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, // 214 - 0x00, 0x00, 0x38, 0x00, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 215 - 0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, // 216 - 0x00, 0x00, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x06, // 217 - 0x00, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 218 - 0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, 0xF8, 0x03, // 219 - 0x00, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 220 - 0x00, 0x00, 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01, // 221 - 0x00, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xF0, 0x01, 0x08, 0x02, 0xF0, 0x01, // 222 - 0x00, 0x00, 0x30, 0x02, 0x48, 0x01, 0xC8, 0x00, 0x48, 0x00, 0xF8, 0x03, // 223 - 0x00, 0x00, 0x00, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x03, // 224 - 0x00, 0x00, 0xE0, 0x01, 0x50, 0x02, 0x50, 0x02, 0x48, 0x02, 0x88, 0x01, // 225 - 0x00, 0x00, 0xE0, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 226 - 0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0x60, // 227 - 0x00, 0x00, 0x00, 0x02, 0xC0, 0x03, 0x20, 0x02, 0xE0, 0x03, 0x00, 0x02, // 228 - 0x00, 0x00, 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, // 229 - 0x00, 0x00, 0x60, 0x03, 0x80, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x60, 0x03, // 230 - 0x00, 0x00, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 231 - 0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 232 - 0x00, 0x00, 0xE0, 0x03, 0x00, 0x01, 0x98, 0x00, 0x40, 0x00, 0xE0, 0x03, // 233 - 0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 234 - 0x00, 0x00, 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, // 235 - 0x00, 0x00, 0xE0, 0x03, 0x40, 0x00, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 236 - 0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 237 - 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 238 - 0x00, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, // 239 - 0x00, 0x00, 0xE0, 0x03, 0xA0, 0x00, 0xA0, 0x00, 0xA0, 0x00, 0x40, // 240 - 0x00, 0x00, 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x20, 0x02, 0x40, 0x02, // 241 - 0x00, 0x00, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x20, 0x00, 0x20, // 242 - 0x00, 0x00, 0x60, 0x00, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0xE0, 0x01, // 243 - 0x00, 0x00, 0xC0, 0x00, 0x20, 0x01, 0xE0, 0x03, 0x20, 0x01, 0xC0, // 244 - 0x00, 0x00, 0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 245 - 0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, // 246 - 0x00, 0x00, 0x60, 0x00, 0x80, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 247 - 0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, // 248 - 0x00, 0x00, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x06, // 249 - 0x00, 0x00, 0x20, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, // 250 - 0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, 0xE0, 0x03, // 251 - 0x00, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, // 252 - 0x00, 0x00, 0x40, 0x01, 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, 0x01, // 253 - 0x00, 0x00, 0xE0, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, 0xC0, 0x01, // 254 - 0x00, 0x00, 0x40, 0x02, 0xA0, 0x01, 0xA0, 0x00, 0xA0, 0x00, 0xE0, 0x03, // 255 + 0x28, 0x02, 0xE0, 0x03, 0x28, 0x02, // 191 + 0xF0, 0x03, 0x88, 0x00, 0x88, 0x00, 0x88, 0x00, 0xF0, 0x03, // 192 + 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x88, 0x01, // 193 + 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 194 + 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0x18, // 195 + 0x00, 0x02, 0xFC, 0x03, 0x04, 0x02, 0xFC, 0x03, 0x00, 0x02, // 196 + 0xF8, 0x03, 0x48, 0x02, 0x48, 0x02, 0x48, 0x02, 0x08, 0x02, // 197 + 0xB8, 0x03, 0x40, 0x00, 0xF8, 0x03, 0x40, 0x00, 0xB8, 0x03, // 198 + 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xB0, 0x01, // 199 + 0xF8, 0x03, 0x80, 0x00, 0x40, 0x00, 0x20, 0x00, 0xF8, 0x03, // 200 + 0xE0, 0x03, 0x08, 0x01, 0x90, 0x00, 0x48, 0x00, 0xE0, 0x03, // 201 + 0xF8, 0x03, 0x40, 0x00, 0xA0, 0x00, 0x10, 0x01, 0x08, 0x02, // 202 + 0x00, 0x02, 0xF0, 0x01, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 203 + 0xF8, 0x03, 0x10, 0x00, 0x60, 0x00, 0x10, 0x00, 0xF8, 0x03, // 204 + 0xF8, 0x03, 0x40, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 205 + 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0xF0, 0x01, // 206 + 0xF8, 0x03, 0x08, 0x00, 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, // 207 + 0xF8, 0x03, 0x48, 0x00, 0x48, 0x00, 0x48, 0x00, 0x30, // 208 + 0xF0, 0x01, 0x08, 0x02, 0x08, 0x02, 0x08, 0x02, 0x10, 0x01, // 209 + 0x08, 0x00, 0x08, 0x00, 0xF8, 0x03, 0x08, 0x00, 0x08, // 210 + 0x38, 0x00, 0x40, 0x02, 0x40, 0x02, 0x40, 0x02, 0xF8, 0x01, // 211 + 0x70, 0x00, 0x88, 0x00, 0xF8, 0x03, 0x88, 0x00, 0x70, // 212 + 0x18, 0x03, 0xA0, 0x00, 0x40, 0x00, 0xA0, 0x00, 0x18, 0x03, // 213 + 0xF8, 0x03, 0x00, 0x02, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, // 214 + 0x38, 0x00, 0x40, 0x00, 0x40, 0x00, 0xF8, 0x03, // 215 + 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, // 216 + 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x02, 0xF8, 0x03, 0x00, 0x06, // 217 + 0x08, 0x00, 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 218 + 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, 0xF8, 0x03, // 219 + 0xF8, 0x03, 0x40, 0x02, 0x40, 0x02, 0x80, 0x01, // 220 + 0x10, 0x01, 0x08, 0x02, 0x48, 0x02, 0x48, 0x02, 0xF0, 0x01, // 221 + 0xF8, 0x03, 0x40, 0x00, 0xF0, 0x01, 0x08, 0x02, 0xF0, 0x01, // 222 + 0x30, 0x02, 0x48, 0x01, 0xC8, 0x00, 0x48, 0x00, 0xF8, 0x03, // 223 + 0x00, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xE0, 0x01, // 224 + 0xE0, 0x01, 0x50, 0x02, 0x48, 0x02, 0x88, 0x01, // 225 + 0xE0, 0x03, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 226 + 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0x60, // 227 + 0x00, 0x02, 0xC0, 0x03, 0x20, 0x02, 0xE0, 0x03, 0x00, 0x02, // 228 + 0xC0, 0x01, 0xA0, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0xC0, // 229 + 0x60, 0x03, 0x80, 0x00, 0xE0, 0x03, 0x80, 0x00, 0x60, 0x03, // 230 + 0x20, 0x02, 0xA0, 0x02, 0xA0, 0x02, 0x40, 0x01, // 231 + 0xE0, 0x03, 0x00, 0x01, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 232 + 0xE0, 0x03, 0x08, 0x01, 0x88, 0x00, 0x48, 0x00, 0xE0, 0x03, // 233 + 0xE0, 0x03, 0x80, 0x00, 0x60, 0x03, // 234 + 0x00, 0x02, 0xC0, 0x01, 0x20, 0x00, 0xE0, 0x03, // 235 + 0xE0, 0x03, 0x40, 0x00, 0x80, 0x00, 0x40, 0x00, 0xE0, 0x03, // 236 + 0xE0, 0x03, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 237 + 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0xC0, 0x01, // 238 + 0xE0, 0x03, 0x20, 0x00, 0x20, 0x00, 0xE0, 0x03, // 239 + 0xE0, 0x03, 0xA0, 0x00, 0x40, // 240 + 0xC0, 0x01, 0x20, 0x02, 0x20, 0x02, 0x40, 0x01, // 241 + 0x20, 0x00, 0xE0, 0x03, 0x20, // 242 + 0x60, 0x00, 0x80, 0x02, 0x80, 0x02, 0xE0, 0x01, // 243 + 0xC0, 0x00, 0x20, 0x01, 0xE0, 0x03, 0x20, 0x01, 0xC0, // 244 + 0x20, 0x02, 0x40, 0x01, 0x80, 0x00, 0x40, 0x01, 0x20, 0x02, // 245 + 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x06, // 246 + 0x60, 0x00, 0x80, 0x00, 0x80, 0x00, 0xE0, 0x03, // 247 + 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, // 248 + 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x02, 0xE0, 0x03, 0x00, 0x06, // 249 + 0x20, 0x00, 0xE0, 0x03, 0x80, 0x02, 0x00, 0x01, // 250 + 0xE0, 0x03, 0x80, 0x02, 0x00, 0x01, 0xE0, 0x03, // 251 + 0xE0, 0x03, 0x80, 0x02, 0x80, 0x02, 0x00, 0x01, // 252 + 0x40, 0x01, 0x20, 0x02, 0xA0, 0x02, 0xC0, 0x01, // 253 + 0xE0, 0x03, 0x80, 0x00, 0xC0, 0x01, 0x20, 0x02, 0xC0, 0x01, // 254 + 0x40, 0x02, 0xA0, 0x01, 0xA0, 0x00, 0xE0, 0x03, // 255 +}; + +const uint8_t ArialMT_Plain_16_UA[] PROGMEM = { + 0x10, // Width: 16 + 0x13, // Height: 19 + 0x20, // First Char: 32 + 0xE0, // Numbers of Chars: 224 + // Jump Table: + 0xFF, 0xFF, 0x00, 0x04, // 32= :65535 + 0x00, 0x00, 0x08, 0x05, // 33=!:0 + 0x00, 0x08, 0x0D, 0x06, // 34=":8 + 0x00, 0x15, 0x1A, 0x09, // 35=#:21 + 0x00, 0x2F, 0x17, 0x09, // 36=$:47 + 0x00, 0x46, 0x26, 0x0E, // 37=%:70 + 0x00, 0x6C, 0x1D, 0x0B, // 38=&:108 + 0x00, 0x89, 0x04, 0x03, // 39=':137 + 0x00, 0x8D, 0x0C, 0x05, // 40=(:141 + 0x00, 0x99, 0x0B, 0x05, // 41=):153 + 0x00, 0xA4, 0x0D, 0x06, // 42=*:164 + 0x00, 0xB1, 0x17, 0x09, // 43=+:177 + 0x00, 0xC8, 0x09, 0x04, // 44=,:200 + 0x00, 0xD1, 0x0B, 0x05, // 45=-:209 + 0x00, 0xDC, 0x08, 0x04, // 46=.:220 + 0x00, 0xE4, 0x0A, 0x04, // 47=/:228 + 0x00, 0xEE, 0x17, 0x09, // 48=0:238 + 0x01, 0x05, 0x11, 0x09, // 49=1:261 + 0x01, 0x16, 0x17, 0x09, // 50=2:278 + 0x01, 0x2D, 0x17, 0x09, // 51=3:301 + 0x01, 0x44, 0x17, 0x09, // 52=4:324 + 0x01, 0x5B, 0x17, 0x09, // 53=5:347 + 0x01, 0x72, 0x17, 0x09, // 54=6:370 + 0x01, 0x89, 0x16, 0x09, // 55=7:393 + 0x01, 0x9F, 0x17, 0x09, // 56=8:415 + 0x01, 0xB6, 0x17, 0x09, // 57=9:438 + 0x01, 0xCD, 0x05, 0x04, // 58=::461 + 0x01, 0xD2, 0x06, 0x04, // 59=;:466 + 0x01, 0xD8, 0x17, 0x09, // 60=<:472 + 0x01, 0xEF, 0x17, 0x09, // 61==:495 + 0x02, 0x06, 0x17, 0x09, // 62=>:518 + 0x02, 0x1D, 0x16, 0x09, // 63=?:541 + 0x02, 0x33, 0x2F, 0x10, // 64=@:563 + 0x02, 0x62, 0x1D, 0x0B, // 65=A:610 + 0x02, 0x7F, 0x1D, 0x0B, // 66=B:639 + 0x02, 0x9C, 0x20, 0x0C, // 67=C:668 + 0x02, 0xBC, 0x20, 0x0C, // 68=D:700 + 0x02, 0xDC, 0x1D, 0x0B, // 69=E:732 + 0x02, 0xF9, 0x19, 0x0A, // 70=F:761 + 0x03, 0x12, 0x20, 0x0C, // 71=G:786 + 0x03, 0x32, 0x1D, 0x0B, // 72=H:818 + 0x03, 0x4F, 0x05, 0x03, // 73=I:847 + 0x03, 0x54, 0x14, 0x08, // 74=J:852 + 0x03, 0x68, 0x1D, 0x0B, // 75=K:872 + 0x03, 0x85, 0x17, 0x09, // 76=L:901 + 0x03, 0x9C, 0x23, 0x0D, // 77=M:924 + 0x03, 0xBF, 0x1D, 0x0B, // 78=N:959 + 0x03, 0xDC, 0x20, 0x0C, // 79=O:988 + 0x03, 0xFC, 0x1C, 0x0B, // 80=P:1020 + 0x04, 0x18, 0x20, 0x0C, // 81=Q:1048 + 0x04, 0x38, 0x1D, 0x0B, // 82=R:1080 + 0x04, 0x55, 0x1D, 0x0B, // 83=S:1109 + 0x04, 0x72, 0x19, 0x09, // 84=T:1138 + 0x04, 0x8B, 0x1D, 0x0B, // 85=U:1163 + 0x04, 0xA8, 0x1C, 0x0B, // 86=V:1192 + 0x04, 0xC4, 0x2B, 0x0F, // 87=W:1220 + 0x04, 0xEF, 0x20, 0x0B, // 88=X:1263 + 0x05, 0x0F, 0x19, 0x09, // 89=Y:1295 + 0x05, 0x28, 0x1A, 0x09, // 90=Z:1320 + 0x05, 0x42, 0x0C, 0x04, // 91=[:1346 + 0x05, 0x4E, 0x0B, 0x04, // 92=\:1358 + 0x05, 0x59, 0x09, 0x04, // 93=]:1369 + 0x05, 0x62, 0x14, 0x07, // 94=^:1378 + 0x05, 0x76, 0x1B, 0x09, // 95=_:1398 + 0x05, 0x91, 0x07, 0x05, // 96=`:1425 + 0x05, 0x98, 0x17, 0x09, // 97=a:1432 + 0x05, 0xAF, 0x17, 0x09, // 98=b:1455 + 0x05, 0xC6, 0x14, 0x08, // 99=c:1478 + 0x05, 0xDA, 0x17, 0x09, // 100=d:1498 + 0x05, 0xF1, 0x17, 0x09, // 101=e:1521 + 0x06, 0x08, 0x0A, 0x04, // 102=f:1544 + 0x06, 0x12, 0x17, 0x09, // 103=g:1554 + 0x06, 0x29, 0x14, 0x08, // 104=h:1577 + 0x06, 0x3D, 0x05, 0x04, // 105=i:1597 + 0x06, 0x42, 0x06, 0x03, // 106=j:1602 + 0x06, 0x48, 0x17, 0x08, // 107=k:1608 + 0x06, 0x5F, 0x05, 0x03, // 108=l:1631 + 0x06, 0x64, 0x23, 0x0D, // 109=m:1636 + 0x06, 0x87, 0x14, 0x08, // 110=n:1671 + 0x06, 0x9B, 0x17, 0x09, // 111=o:1691 + 0x06, 0xB2, 0x17, 0x09, // 112=p:1714 + 0x06, 0xC9, 0x18, 0x09, // 113=q:1737 + 0x06, 0xE1, 0x0D, 0x05, // 114=r:1761 + 0x06, 0xEE, 0x14, 0x08, // 115=s:1774 + 0x07, 0x02, 0x0B, 0x04, // 116=t:1794 + 0x07, 0x0D, 0x14, 0x08, // 117=u:1805 + 0x07, 0x21, 0x13, 0x07, // 118=v:1825 + 0x07, 0x34, 0x1F, 0x0B, // 119=w:1844 + 0x07, 0x53, 0x14, 0x07, // 120=x:1875 + 0x07, 0x67, 0x13, 0x07, // 121=y:1895 + 0x07, 0x7A, 0x14, 0x07, // 122=z:1914 + 0x07, 0x8E, 0x0F, 0x05, // 123={:1934 + 0x07, 0x9D, 0x06, 0x03, // 124=|:1949 + 0x07, 0xA3, 0x0E, 0x05, // 125=}:1955 + 0x07, 0xB1, 0x17, 0x09, // 126=~:1969 + 0x07, 0xC8, 0x1D, 0x0C, // 127=:1992 + 0x07, 0xE5, 0x26, 0x0E, // 1026=Ђ:2021 + 0x08, 0x0B, 0x19, 0x09, // 1027=Ѓ:2059 + 0x08, 0x24, 0x06, 0x04, // 8218=‚:2084 + 0x08, 0x2A, 0x10, 0x06, // 1107=ѓ:2090 + 0x08, 0x3A, 0x09, 0x05, // 8222=„:2106 + 0x08, 0x43, 0x26, 0x10, // 8230=…:2115 + 0x08, 0x69, 0x16, 0x09, // 8224=†:2153 + 0x08, 0x7F, 0x17, 0x09, // 8225=‡:2175 + 0x08, 0x96, 0x17, 0x09, // 8364=€:2198 + 0x08, 0xAD, 0x32, 0x11, // 8240=‰:2221 + 0x08, 0xDF, 0x2F, 0x11, // 1033=Љ:2271 + 0x09, 0x0E, 0x0B, 0x05, // 8249=‹:2318 + 0x09, 0x19, 0x2C, 0x10, // 1034=Њ:2329 + 0x09, 0x45, 0x1A, 0x09, // 1036=Ќ:2373 + 0x09, 0x5F, 0x23, 0x0D, // 1035=Ћ:2399 + 0x09, 0x82, 0x1D, 0x0C, // 1039=Џ:2434 + 0x09, 0x9F, 0x15, 0x08, // 1106=ђ:2463 + 0x09, 0xB4, 0x04, 0x04, // 8216=‘:2484 + 0x09, 0xB8, 0x04, 0x04, // 8217=’:2488 + 0x09, 0xBC, 0x07, 0x05, // 8220=“:2492 + 0x09, 0xC3, 0x0A, 0x05, // 8221=”:2499 + 0x09, 0xCD, 0x0E, 0x06, // 8226=•:2509 + 0x09, 0xDB, 0x1A, 0x09, // 8211=–:2523 + 0x09, 0xF5, 0x2F, 0x10, // 8212=—:2549 + 0x0A, 0x24, 0x1D, 0x0C, // 65533=�:2596 + 0x0A, 0x41, 0x2C, 0x10, // 8482=™:2625 + 0x0A, 0x6D, 0x29, 0x0F, // 1113=љ:2669 + 0x0A, 0x96, 0x0B, 0x05, // 8250=›:2710 + 0x0A, 0xA1, 0x23, 0x0D, // 1114=њ:2721 + 0x0A, 0xC4, 0x14, 0x07, // 1116=ќ:2756 + 0x0A, 0xD8, 0x14, 0x08, // 1115=ћ:2776 + 0x0A, 0xEC, 0x14, 0x08, // 1119=џ:2796 + 0xFF, 0xFF, 0x00, 0x04, // 160= :65535 + 0x0B, 0x00, 0x1C, 0x0A, // 1038=Ў:2816 + 0x0B, 0x1C, 0x13, 0x07, // 1118=ў:2844 + 0x0B, 0x2F, 0x14, 0x08, // 1032=Ј:2863 + 0x0B, 0x43, 0x14, 0x09, // 164=¤:2883 + 0x0B, 0x57, 0x16, 0x08, // 1168=Ґ:2903 + 0x0B, 0x6D, 0x06, 0x03, // 166=¦:2925 + 0x0B, 0x73, 0x17, 0x09, // 167=§:2931 + 0x0B, 0x8A, 0x1D, 0x0B, // 1025=Ё:2954 + 0x0B, 0xA7, 0x23, 0x0C, // 169=©:2983 + 0x0B, 0xCA, 0x20, 0x0C, // 1028=Є:3018 + 0x0B, 0xEA, 0x14, 0x09, // 171=«:3050 + 0x0B, 0xFE, 0x17, 0x09, // 172=¬:3070 + 0x0C, 0x15, 0x0B, 0x05, // 173=­:3093 + 0x0C, 0x20, 0x23, 0x0C, // 174=®:3104 + 0x0C, 0x43, 0x07, 0x03, // 1031=Ї:3139 + 0x0C, 0x4A, 0x0D, 0x06, // 176=°:3146 + 0x0C, 0x57, 0x17, 0x09, // 177=±:3159 + 0x0C, 0x6E, 0x05, 0x03, // 1030=І:3182 + 0x0C, 0x73, 0x05, 0x04, // 1110=і:3187 + 0x0C, 0x78, 0x10, 0x07, // 1169=ґ:3192 + 0x0C, 0x88, 0x17, 0x09, // 181=µ:3208 + 0x0C, 0x9F, 0x19, 0x09, // 182=¶:3231 + 0x0C, 0xB8, 0x08, 0x05, // 183=·:3256 + 0x0C, 0xC0, 0x17, 0x09, // 1105=ё:3264 + 0x0C, 0xD7, 0x2F, 0x11, // 8470=№:3287 + 0x0D, 0x06, 0x14, 0x08, // 1108=є:3334 + 0x0D, 0x1A, 0x17, 0x09, // 187=»:3354 + 0x0D, 0x31, 0x06, 0x03, // 1112=ј:3377 + 0x0D, 0x37, 0x1D, 0x0B, // 1029=Ѕ:3383 + 0x0D, 0x54, 0x14, 0x08, // 1109=ѕ:3412 + 0x0D, 0x68, 0x07, 0x03, // 1111=ї:3432 + 0x0D, 0x6F, 0x1D, 0x0B, // 1040=А:3439 + 0x0D, 0x8C, 0x1D, 0x0B, // 1041=Б:3468 + 0x0D, 0xA9, 0x1D, 0x0B, // 1042=В:3497 + 0x0D, 0xC6, 0x19, 0x09, // 1043=Г:3526 + 0x0D, 0xDF, 0x1E, 0x0B, // 1044=Д:3551 + 0x0D, 0xFD, 0x1D, 0x0B, // 1045=Е:3581 + 0x0E, 0x1A, 0x29, 0x0E, // 1046=Ж:3610 + 0x0E, 0x43, 0x1A, 0x0A, // 1047=З:3651 + 0x0E, 0x5D, 0x20, 0x0C, // 1048=И:3677 + 0x0E, 0x7D, 0x20, 0x0C, // 1049=Й:3709 + 0x0E, 0x9D, 0x1A, 0x09, // 1050=К:3741 + 0x0E, 0xB7, 0x1D, 0x0B, // 1051=Л:3767 + 0x0E, 0xD4, 0x23, 0x0D, // 1052=М:3796 + 0x0E, 0xF7, 0x1D, 0x0B, // 1053=Н:3831 + 0x0F, 0x14, 0x20, 0x0C, // 1054=О:3860 + 0x0F, 0x34, 0x1D, 0x0B, // 1055=П:3892 + 0x0F, 0x51, 0x1C, 0x0B, // 1056=Р:3921 + 0x0F, 0x6D, 0x20, 0x0C, // 1057=С:3949 + 0x0F, 0x8D, 0x19, 0x09, // 1058=Т:3981 + 0x0F, 0xA6, 0x1C, 0x0A, // 1059=У:4006 + 0x0F, 0xC2, 0x1D, 0x0B, // 1060=Ф:4034 + 0x0F, 0xDF, 0x20, 0x0B, // 1061=Х:4063 + 0x0F, 0xFF, 0x21, 0x0C, // 1062=Ц:4095 + 0x10, 0x20, 0x1A, 0x0A, // 1063=Ч:4128 + 0x10, 0x3A, 0x23, 0x0D, // 1064=Ш:4154 + 0x10, 0x5D, 0x27, 0x0E, // 1065=Щ:4189 + 0x10, 0x84, 0x23, 0x0D, // 1066=Ъ:4228 + 0x10, 0xA7, 0x26, 0x0E, // 1067=Ы:4263 + 0x10, 0xCD, 0x1D, 0x0B, // 1068=Ь:4301 + 0x10, 0xEA, 0x20, 0x0C, // 1069=Э:4330 + 0x11, 0x0A, 0x2C, 0x10, // 1070=Ю:4362 + 0x11, 0x36, 0x20, 0x0C, // 1071=Я:4406 + 0x11, 0x56, 0x17, 0x09, // 1072=а:4438 + 0x11, 0x6D, 0x17, 0x09, // 1073=б:4461 + 0x11, 0x84, 0x17, 0x09, // 1074=в:4484 + 0x11, 0x9B, 0x10, 0x06, // 1075=г:4507 + 0x11, 0xAB, 0x18, 0x09, // 1076=д:4523 + 0x11, 0xC3, 0x17, 0x09, // 1077=е:4547 + 0x11, 0xDA, 0x1D, 0x0A, // 1078=ж:4570 + 0x11, 0xF7, 0x11, 0x07, // 1079=з:4599 + 0x12, 0x08, 0x14, 0x08, // 1080=и:4616 + 0x12, 0x1C, 0x14, 0x08, // 1081=й:4636 + 0x12, 0x30, 0x14, 0x07, // 1082=к:4656 + 0x12, 0x44, 0x14, 0x08, // 1083=л:4676 + 0x12, 0x58, 0x1D, 0x0B, // 1084=м:4696 + 0x12, 0x75, 0x14, 0x08, // 1085=н:4725 + 0x12, 0x89, 0x17, 0x09, // 1086=о:4745 + 0x12, 0xA0, 0x14, 0x08, // 1087=п:4768 + 0x12, 0xB4, 0x17, 0x09, // 1088=р:4788 + 0x12, 0xCB, 0x14, 0x08, // 1089=с:4811 + 0x12, 0xDF, 0x13, 0x07, // 1090=т:4831 + 0x12, 0xF2, 0x13, 0x07, // 1091=у:4850 + 0x13, 0x05, 0x23, 0x0D, // 1092=ф:4869 + 0x13, 0x28, 0x14, 0x07, // 1093=х:4904 + 0x13, 0x3C, 0x1B, 0x09, // 1094=ц:4924 + 0x13, 0x57, 0x14, 0x08, // 1095=ч:4951 + 0x13, 0x6B, 0x1D, 0x0B, // 1096=ш:4971 + 0x13, 0x88, 0x21, 0x0B, // 1097=щ:5000 + 0x13, 0xA9, 0x1A, 0x0A, // 1098=ъ:5033 + 0x13, 0xC3, 0x20, 0x0C, // 1099=ы:5059 + 0x13, 0xE3, 0x17, 0x09, // 1100=ь:5091 + 0x13, 0xFA, 0x14, 0x08, // 1101=э:5114 + 0x14, 0x0E, 0x20, 0x0C, // 1102=ю:5134 + 0x14, 0x2E, 0x17, 0x09, // 1103=я:5166 + // Font Data: + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x5F, // 33 + 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x78, // 34 + 0x80, 0x08, 0x00, 0x80, 0x78, 0x00, 0xC0, 0x0F, 0x00, 0xB8, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x78, 0x00, 0xC0, 0x0F, 0x00, + 0xB8, 0x08, 0x00, 0x80, 0x08, // 35 + 0x00, 0x00, 0x00, 0xE0, 0x10, 0x00, 0x10, 0x21, 0x00, 0x08, 0x43, 0x00, 0xFC, 0xFF, 0x00, 0x08, 0x42, 0x00, 0x18, 0x22, 0x00, + 0x20, 0x1C, // 36 + 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x08, 0x61, 0x00, 0xF0, 0x18, 0x00, 0x00, 0x06, 0x00, + 0xC0, 0x01, 0x00, 0x30, 0x3C, 0x00, 0x08, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x3C, // 37 + 0x00, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x70, 0x22, 0x00, 0x88, 0x41, 0x00, 0x08, 0x43, 0x00, 0x88, 0x44, 0x00, 0x70, 0x28, 0x00, + 0x00, 0x10, 0x00, 0x00, 0x28, 0x00, 0x00, 0x44, // 38 + 0x00, 0x00, 0x00, 0x78, // 39 + 0x00, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x70, 0xC0, 0x01, 0x08, 0x00, 0x02, // 40 + 0x00, 0x00, 0x00, 0x08, 0x00, 0x02, 0x70, 0xC0, 0x01, 0x80, 0x3F, // 41 + 0x10, 0x00, 0x00, 0xD0, 0x00, 0x00, 0x38, 0x00, 0x00, 0xD0, 0x00, 0x00, 0x10, // 42 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x02, // 43 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x01, // 44 + 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, // 45 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, // 46 + 0x00, 0x60, 0x00, 0x00, 0x1E, 0x00, 0xE0, 0x01, 0x00, 0x18, // 47 + 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, + 0xE0, 0x1F, // 48 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0x00, 0x10, 0x00, 0x00, 0xF8, 0x7F, // 49 + 0x00, 0x00, 0x00, 0x20, 0x40, 0x00, 0x10, 0x60, 0x00, 0x08, 0x50, 0x00, 0x08, 0x48, 0x00, 0x08, 0x44, 0x00, 0x10, 0x43, 0x00, + 0xE0, 0x40, // 50 + 0x00, 0x00, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x88, 0x41, 0x00, 0xF0, 0x22, 0x00, + 0x00, 0x1C, // 51 + 0x00, 0x0C, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x09, 0x00, 0xC0, 0x08, 0x00, 0x20, 0x08, 0x00, 0x10, 0x08, 0x00, 0xF8, 0x7F, 0x00, + 0x00, 0x08, // 52 + 0x00, 0x00, 0x00, 0xC0, 0x11, 0x00, 0xB8, 0x20, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x08, 0x21, 0x00, + 0x08, 0x1E, // 53 + 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x10, 0x21, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x88, 0x40, 0x00, 0x10, 0x21, 0x00, + 0x20, 0x1E, // 54 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x78, 0x00, 0x88, 0x07, 0x00, 0x68, 0x00, 0x00, + 0x18, // 55 + 0x00, 0x00, 0x00, 0x60, 0x1C, 0x00, 0x90, 0x22, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x90, 0x22, 0x00, + 0x60, 0x1C, // 56 + 0x00, 0x00, 0x00, 0xE0, 0x11, 0x00, 0x10, 0x22, 0x00, 0x08, 0x44, 0x00, 0x08, 0x44, 0x00, 0x08, 0x44, 0x00, 0x10, 0x22, 0x00, + 0xE0, 0x1F, // 57 + 0x00, 0x00, 0x00, 0x40, 0x40, // 58 + 0x00, 0x00, 0x00, 0x40, 0xC0, 0x01, // 59 + 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x05, 0x00, 0x00, 0x05, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, + 0x40, 0x10, // 60 + 0x00, 0x00, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, + 0x80, 0x08, // 61 + 0x00, 0x00, 0x00, 0x40, 0x10, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x80, 0x08, 0x00, 0x00, 0x05, 0x00, 0x00, 0x05, 0x00, + 0x00, 0x02, // 62 + 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x10, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x5C, 0x00, 0x08, 0x02, 0x00, 0x10, 0x01, 0x00, + 0xE0, // 63 + 0x00, 0x00, 0x00, 0x00, 0x3F, 0x00, 0xC0, 0x40, 0x00, 0x20, 0x80, 0x00, 0x10, 0x1E, 0x01, 0x10, 0x21, 0x01, 0x88, 0x40, 0x02, + 0x48, 0x40, 0x02, 0x48, 0x40, 0x02, 0x48, 0x20, 0x02, 0x88, 0x7C, 0x02, 0xC8, 0x43, 0x02, 0x10, 0x40, 0x02, 0x10, 0x20, 0x01, + 0x60, 0x10, 0x01, 0x80, 0x8F, // 64 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x70, 0x04, 0x00, 0x08, 0x04, 0x00, 0x70, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 65 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x90, 0x22, 0x00, 0x60, 0x1C, // 66 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 67 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 68 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 69 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x08, // 70 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x42, 0x00, + 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x12, 0x00, 0x00, 0x0E, // 71 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xF8, 0x7F, // 72 + 0x00, 0x00, 0x00, 0xF8, 0x7F, // 73 + 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x3F, // 74 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0x80, 0x03, 0x00, 0x40, 0x04, 0x00, + 0x20, 0x18, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, // 75 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, // 76 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x30, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, 0x7F, // 77 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x10, 0x00, 0x00, 0x60, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x18, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x7F, // 78 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 79 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x10, 0x01, 0x00, 0xE0, // 80 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x50, 0x00, + 0x08, 0x50, 0x00, 0x10, 0x20, 0x00, 0x20, 0x70, 0x00, 0xC0, 0x4F, // 81 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x0E, 0x00, + 0x08, 0x1A, 0x00, 0x10, 0x21, 0x00, 0xE0, 0x40, // 82 + 0x00, 0x00, 0x00, 0x60, 0x10, 0x00, 0x90, 0x20, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x42, 0x00, + 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x1C, // 83 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 84 + 0x00, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xF8, 0x1F, // 85 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x18, 0x00, 0x00, 0x60, 0x00, 0x00, 0x18, 0x00, + 0x00, 0x07, 0x00, 0xE0, 0x00, 0x00, 0x18, // 86 + 0x18, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x03, 0x00, 0x70, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x70, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1E, 0x00, 0xE0, 0x01, 0x00, + 0x18, // 87 + 0x00, 0x40, 0x00, 0x08, 0x20, 0x00, 0x10, 0x18, 0x00, 0x60, 0x04, 0x00, 0x80, 0x02, 0x00, 0x00, 0x01, 0x00, 0x80, 0x02, 0x00, + 0x60, 0x0C, 0x00, 0x10, 0x10, 0x00, 0x08, 0x20, 0x00, 0x00, 0x40, // 88 + 0x08, 0x00, 0x00, 0x30, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x7E, 0x00, 0x80, 0x01, 0x00, 0x40, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x08, // 89 + 0x00, 0x40, 0x00, 0x08, 0x60, 0x00, 0x08, 0x58, 0x00, 0x08, 0x44, 0x00, 0x08, 0x43, 0x00, 0x88, 0x40, 0x00, 0x68, 0x40, 0x00, + 0x18, 0x40, 0x00, 0x08, 0x40, // 90 + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x03, 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, // 91 + 0x18, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x60, // 92 + 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, 0xF8, 0xFF, 0x03, // 93 + 0x00, 0x01, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00, 0x00, 0x08, 0x00, 0x00, 0x30, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x01, // 94 + 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, + 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, // 95 + 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x10, // 96 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 97 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 98 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, // 99 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0xF8, 0x7F, // 100 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 101 + 0x40, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x48, 0x00, 0x00, 0x48, // 102 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x01, 0x80, 0x20, 0x02, 0x40, 0x40, 0x02, 0x40, 0x40, 0x02, 0x40, 0x40, 0x02, 0x80, 0x20, 0x01, + 0xC0, 0xFF, // 103 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 104 + 0x00, 0x00, 0x00, 0xC8, 0x7F, // 105 + 0x00, 0x00, 0x02, 0xC8, 0xFF, 0x01, // 106 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x06, 0x00, 0x00, 0x19, 0x00, 0x80, 0x20, 0x00, + 0x40, 0x40, // 107 + 0x00, 0x00, 0x00, 0xF8, 0x7F, // 108 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, 0x00, + 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 109 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, 0x7F, // 110 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 111 + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x03, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 112 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0xC0, 0xFF, 0x03, // 113 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, // 114 + 0x00, 0x00, 0x00, 0x80, 0x23, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x38, // 115 + 0x40, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, // 116 + 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, 0xC0, 0x7F, // 117 + 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, // 118 + 0xC0, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, + 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1F, 0x00, 0xC0, // 119 + 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, // 120 + 0xC0, 0x01, 0x00, 0x00, 0x06, 0x02, 0x00, 0x38, 0x02, 0x00, 0xC0, 0x01, 0x00, 0x38, 0x00, 0x00, 0x07, 0x00, 0xC0, // 121 + 0x40, 0x40, 0x00, 0x40, 0x60, 0x00, 0x40, 0x58, 0x00, 0x40, 0x44, 0x00, 0x40, 0x43, 0x00, 0xC0, 0x40, 0x00, 0x40, 0x40, // 122 + 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0xF0, 0xFB, 0x01, 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, // 123 + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x03, // 124 + 0x08, 0x00, 0x02, 0x08, 0x00, 0x02, 0xF0, 0xFB, 0x01, 0x00, 0x04, 0x00, 0x00, 0x04, // 125 + 0x00, 0x02, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, + 0x00, 0x01, // 126 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, + 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0xE0, 0x7F, // 127 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x01, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x3E, // 1026 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x0A, 0x00, 0x00, 0x09, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 1027 + 0x00, 0x00, 0x00, 0x00, 0xC0, 0x01, // 8218 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x00, 0x00, 0x50, 0x00, 0x00, 0x48, 0x00, 0x00, 0x40, // 1107 + 0x00, 0xC0, 0x01, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x01, // 8222 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, // 8230 + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xF8, 0xFF, 0x03, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, + 0x40, // 8224 + 0x00, 0x00, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0xF8, 0xFF, 0x03, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, + 0x40, 0x40, // 8225 + 0x00, 0x05, 0x00, 0xC0, 0x1F, 0x00, 0x20, 0x25, 0x00, 0x10, 0x45, 0x00, 0x08, 0x45, 0x00, 0x08, 0x45, 0x00, 0x08, 0x45, 0x00, + 0x10, 0x20, // 8364 + 0xF0, 0x00, 0x00, 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x08, 0x71, 0x00, 0xF0, 0x0C, 0x00, 0x00, 0x03, 0x00, 0xE0, 0x3C, 0x00, + 0x18, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x42, 0x00, + 0x00, 0x42, 0x00, 0x00, 0x42, 0x00, 0x00, 0x3C, // 8240 + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x3F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, 0x00, 0x00, 0x3E, // 1033 + 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, // 8249 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, + 0xF8, 0x7F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x3E, // 1034 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x82, 0x02, 0x00, 0x61, 0x04, 0x00, 0x10, 0x08, 0x00, + 0x08, 0x30, 0x00, 0x08, 0x40, // 1036 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x01, 0x00, + 0x08, 0x01, 0x00, 0x08, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x7E, // 1035 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, // 1039 + 0x10, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x90, 0x00, 0x00, 0x50, 0x00, 0x00, 0x50, 0x00, 0x00, 0x40, 0x00, 0x02, 0x80, 0xFF, + 0x03, // 1106 + 0x00, 0x00, 0x00, 0x38, // 8216 + 0x00, 0x00, 0x00, 0x38, // 8217 + 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, // 8220 + 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, // 8221 + 0x00, 0x00, 0x00, 0x00, 0x03, 0x00, 0x80, 0x07, 0x00, 0x80, 0x07, 0x00, 0x00, 0x03, // 8226 + 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x04, 0x00, 0x00, 0x04, // 8211 + 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x04, 0x00, 0x00, 0x04, // 8212 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, + 0x20, 0x40, 0x00, 0x20, 0x40, 0x00, 0xE0, 0x7F, // 65533 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x00, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x18, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x01, 0x00, 0xE0, 0x00, 0x00, 0x18, 0x00, 0x00, + 0xF8, 0x01, // 8482 + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xC0, 0x3F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, + 0xC0, 0x7F, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x64, 0x00, 0x00, + 0x38, // 1113 + 0x00, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, // 8250 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0xC0, 0x7F, 0x00, + 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x38, // 1114 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x10, 0x04, 0x00, 0x08, 0x1B, 0x00, 0xC0, 0x20, 0x00, 0x40, + 0x40, // 1116 + 0x10, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x90, 0x00, 0x00, 0x50, 0x00, 0x00, 0x50, 0x00, 0x00, 0x40, 0x00, 0x00, 0x80, + 0x7F, // 1115 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x40, 0x00, 0xC0, + 0x7F, // 1119 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x60, 0x40, 0x00, 0x81, 0x41, 0x00, 0x02, 0x66, 0x00, 0x02, 0x18, 0x00, 0x02, 0x06, 0x00, + 0x81, 0x01, 0x00, 0x60, 0x00, 0x00, 0x18, // 1038 + 0xC0, 0x01, 0x00, 0x08, 0x06, 0x02, 0x10, 0x38, 0x02, 0x10, 0xC0, 0x01, 0x10, 0x38, 0x00, 0x08, 0x07, 0x00, 0xC0, // 1118 + 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, + 0x3F, // 1032 + 0x00, 0x00, 0x00, 0x40, 0x0B, 0x00, 0x80, 0x04, 0x00, 0x40, 0x08, 0x00, 0x40, 0x08, 0x00, 0x80, 0x04, 0x00, 0x40, 0x0B, // 164 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x0F, // 1168 + 0x00, 0x00, 0x00, 0xF8, 0xF1, 0x03, // 166 + 0x00, 0x86, 0x00, 0x70, 0x09, 0x01, 0xC8, 0x10, 0x02, 0x88, 0x10, 0x02, 0x08, 0x21, 0x02, 0x08, 0x61, 0x02, 0x30, 0xD2, 0x01, + 0x00, 0x0C, // 167 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x08, 0x41, 0x00, 0x0A, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 1025 + 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0xC8, 0x47, 0x00, 0x28, 0x48, 0x00, 0x28, 0x48, 0x00, 0x28, 0x48, 0x00, + 0x28, 0x48, 0x00, 0x48, 0x44, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 169 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x11, 0x00, 0x10, 0x21, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 1028 + 0x00, 0x00, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, // 171 + 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, 0x80, 0x00, 0x00, + 0x80, 0x0F, // 172 + 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, // 173 + 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0xE8, 0x4F, 0x00, 0x28, 0x41, 0x00, 0x28, 0x41, 0x00, 0x28, 0x43, 0x00, + 0x28, 0x45, 0x00, 0xC8, 0x48, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 174 + 0x02, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x02, // 1031 + 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x48, 0x00, 0x00, 0x48, 0x00, 0x00, 0x30, // 176 + 0x00, 0x00, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0xE0, 0x4F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, // 177 + 0x00, 0x00, 0x00, 0xF8, 0x7F, // 1030 + 0x00, 0x00, 0x00, 0xC8, 0x7F, // 1110 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x78, // 1169 + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x03, 0x00, 0x20, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x20, 0x00, + 0xC0, 0x7F, // 181 + 0xF0, 0x00, 0x00, 0xF8, 0x00, 0x00, 0xF8, 0x01, 0x00, 0xF8, 0x01, 0x00, 0xF8, 0xFF, 0x03, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0xF8, 0xFF, 0x03, 0x08, // 182 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, // 183 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x50, 0x44, 0x00, 0x40, 0x44, 0x00, 0x50, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 1105 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x20, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x06, 0x00, 0x00, 0x08, 0x00, + 0x00, 0x10, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x00, 0x00, 0x80, 0x27, 0x00, 0x40, 0x28, 0x00, 0x40, 0x28, 0x00, 0x40, 0x28, 0x00, + 0x40, 0x28, 0x00, 0x80, 0x27, // 8470 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x20, 0x00, 0x00, + 0x11, // 1108 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, + 0x00, 0x04, // 187 + 0x00, 0x00, 0x02, 0xC8, 0xFF, 0x01, // 1112 + 0x00, 0x00, 0x00, 0x60, 0x10, 0x00, 0x90, 0x20, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x42, 0x00, + 0x08, 0x42, 0x00, 0x10, 0x22, 0x00, 0x20, 0x1C, // 1029 + 0x00, 0x00, 0x00, 0x80, 0x23, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, + 0x38, // 1109 + 0x10, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x10, // 1111 + 0x00, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x1C, 0x00, 0x80, 0x07, 0x00, 0x70, 0x04, 0x00, 0x08, 0x04, 0x00, 0x70, 0x04, 0x00, + 0x80, 0x07, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, // 1040 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x00, 0x3E, // 1041 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x90, 0x22, 0x00, 0x60, 0x1C, // 1042 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 1043 + 0x00, 0xC0, 0x03, 0x00, 0x60, 0x00, 0x00, 0x5C, 0x00, 0xF8, 0x43, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0xC0, 0x03, // 1044 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x08, 0x40, // 1045 + 0x08, 0x30, 0x00, 0x10, 0x08, 0x00, 0x60, 0x04, 0x00, 0x80, 0x02, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xF8, 0x7F, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x80, 0x02, 0x00, 0x60, 0x04, 0x00, 0x10, 0x08, 0x00, 0x08, 0x30, 0x00, 0x08, + 0x40, // 1046 + 0x00, 0x00, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, 0x88, 0x42, 0x00, + 0x70, 0x42, 0x00, 0x00, 0x3C, // 1047 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x30, 0x00, 0x00, 0x08, 0x00, 0x00, 0x04, 0x00, 0x00, 0x02, 0x00, 0x00, 0x01, 0x00, + 0x80, 0x00, 0x00, 0x40, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, 0x7F, // 1048 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x30, 0x00, 0x00, 0x08, 0x00, 0x01, 0x04, 0x00, 0x02, 0x02, 0x00, 0x02, 0x01, 0x00, + 0x82, 0x00, 0x00, 0x41, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, 0x7F, // 1049 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x80, 0x02, 0x00, 0x60, 0x04, 0x00, 0x10, 0x08, 0x00, + 0x08, 0x30, 0x00, 0x08, 0x40, // 1050 + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x3F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, // 1051 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x30, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x1C, 0x00, 0x00, 0x03, 0x00, 0xC0, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, 0x7F, // 1052 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, + 0x00, 0x01, 0x00, 0x00, 0x01, 0x00, 0xF8, 0x7F, // 1053 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, 0xC0, 0x0F, // 1054 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, // 1055 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x10, 0x01, 0x00, 0xE0, // 1056 + 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, + 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, // 1057 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, + 0x08, 0x00, 0x00, 0x08, // 1058 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x60, 0x40, 0x00, 0x80, 0x41, 0x00, 0x00, 0x66, 0x00, 0x00, 0x18, 0x00, 0x00, 0x06, 0x00, + 0x80, 0x01, 0x00, 0x60, 0x00, 0x00, 0x18, // 1059 + 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x40, 0x08, 0x00, 0x20, 0x10, 0x00, 0x20, 0x10, 0x00, 0xF8, 0x7F, 0x00, 0x20, 0x10, 0x00, + 0x20, 0x10, 0x00, 0x40, 0x08, 0x00, 0x80, 0x07, // 1060 + 0x00, 0x40, 0x00, 0x08, 0x20, 0x00, 0x10, 0x18, 0x00, 0x60, 0x04, 0x00, 0x80, 0x02, 0x00, 0x00, 0x01, 0x00, 0x80, 0x02, 0x00, + 0x60, 0x0C, 0x00, 0x10, 0x10, 0x00, 0x08, 0x20, 0x00, 0x00, 0x40, // 1061 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0xC0, 0x03, // 1062 + 0x00, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x02, 0x00, 0xF8, 0x7F, // 1063 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, // 1064 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0xC0, 0x03, // 1065 + 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x3E, // 1066 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x7F, // 1067 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, + 0x00, 0x41, 0x00, 0x00, 0x41, 0x00, 0x00, 0x3E, // 1068 + 0x00, 0x00, 0x00, 0x20, 0x10, 0x00, 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x41, 0x00, 0x08, 0x41, 0x00, + 0x08, 0x41, 0x00, 0x10, 0x21, 0x00, 0x20, 0x11, 0x00, 0xC0, 0x0F, // 1069 + 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0x00, 0x02, 0x00, 0xC0, 0x0F, 0x00, 0x20, 0x10, 0x00, + 0x10, 0x20, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x08, 0x40, 0x00, 0x10, 0x20, 0x00, 0x20, 0x10, 0x00, + 0xC0, 0x0F, // 1070 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x40, 0x00, 0x10, 0x21, 0x00, 0x08, 0x1A, 0x00, 0x08, 0x0E, 0x00, 0x08, 0x02, 0x00, + 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0x08, 0x02, 0x00, 0xF8, 0x7F, // 1071 + 0x00, 0x00, 0x00, 0x00, 0x39, 0x00, 0x80, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x42, 0x00, 0x40, 0x22, 0x00, + 0x80, 0x7F, // 1072 + 0x00, 0x00, 0x00, 0xE0, 0x1F, 0x00, 0x90, 0x20, 0x00, 0x48, 0x40, 0x00, 0x48, 0x40, 0x00, 0x48, 0x40, 0x00, 0x88, 0x20, 0x00, + 0x08, 0x1F, // 1073 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, + 0x80, 0x3B, // 1074 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, // 1075 + 0x00, 0xC0, 0x01, 0x00, 0x70, 0x00, 0xC0, 0x4F, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0xC0, 0x7F, 0x00, + 0x00, 0xC0, 0x01, // 1076 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x24, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, + 0x00, 0x17, // 1077 + 0xC0, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, + 0x00, 0x1B, 0x00, 0xC0, 0x20, 0x00, 0x40, 0x40, // 1078 + 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x3B, // 1079 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x30, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x02, 0x00, 0x80, 0x01, 0x00, 0xC0, + 0x7F, // 1080 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x08, 0x30, 0x00, 0x10, 0x0C, 0x00, 0x10, 0x02, 0x00, 0x90, 0x01, 0x00, 0xC8, + 0x7F, // 1081 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0xC0, 0x20, 0x00, 0x40, + 0x40, // 1082 + 0x00, 0x40, 0x00, 0xC0, 0x3F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, + 0x7F, // 1083 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x06, 0x00, 0x00, 0x18, 0x00, 0x00, 0x60, 0x00, 0x00, 0x18, 0x00, + 0x00, 0x06, 0x00, 0xC0, 0x01, 0x00, 0xC0, 0x7F, // 1084 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0xC0, + 0x7F, // 1085 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 1086 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, + 0x7F, // 1087 + 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x03, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, + 0x00, 0x1F, // 1088 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, + 0x20, // 1089 + 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, // 1090 + 0xC0, 0x01, 0x00, 0x00, 0x06, 0x02, 0x00, 0x38, 0x02, 0x00, 0xC0, 0x01, 0x00, 0x38, 0x00, 0x00, 0x07, 0x00, 0xC0, // 1091 + 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0xF8, 0xFF, 0x03, + 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1F, // 1092 + 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1B, 0x00, 0x80, 0x20, 0x00, 0x40, + 0x40, // 1093 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, + 0xC0, 0x7F, 0x00, 0x00, 0xC0, 0x03, // 1094 + 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0x04, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0x00, 0x08, 0x00, 0xC0, + 0x7F, // 1095 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xC0, 0x7F, // 1096 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x40, 0x00, + 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0xC0, 0x03, // 1097 + 0x00, 0x00, 0x00, 0x40, 0x00, 0x00, 0x40, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, + 0x00, 0x44, 0x00, 0x00, 0x38, // 1098 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, + 0x00, 0x38, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x7F, // 1099 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, 0x00, 0x44, 0x00, + 0x00, 0x38, // 1100 + 0x00, 0x00, 0x00, 0x00, 0x11, 0x00, 0x80, 0x20, 0x00, 0x40, 0x44, 0x00, 0x40, 0x44, 0x00, 0x80, 0x24, 0x00, 0x00, + 0x1F, // 1101 + 0x00, 0x00, 0x00, 0xC0, 0x7F, 0x00, 0x00, 0x04, 0x00, 0x00, 0x04, 0x00, 0x00, 0x1F, 0x00, 0x80, 0x20, 0x00, 0x40, 0x40, 0x00, + 0x40, 0x40, 0x00, 0x40, 0x40, 0x00, 0x80, 0x20, 0x00, 0x00, 0x1F, // 1102 + 0x00, 0x00, 0x00, 0x80, 0x63, 0x00, 0x40, 0x14, 0x00, 0x40, 0x0C, 0x00, 0x40, 0x04, 0x00, 0x40, 0x04, 0x00, 0x40, 0x04, 0x00, + 0xC0, 0x7F, // 1103 +}; + +const uint8_t ArialMT_Plain_24_UA[] PROGMEM = { + 0x18, // Width: 24 + 0x1C, // Height: 28 + 0x20, // First Char: 32 + 0xE0, // Numbers of Chars: 224 + // Jump Table: + 0xFF, 0xFF, 0x00, 0x07, // 32= :65535 + 0x00, 0x00, 0x13, 0x08, // 33=!:0 + 0x00, 0x13, 0x1A, 0x09, // 34=":19 + 0x00, 0x2D, 0x33, 0x0D, // 35=#:45 + 0x00, 0x60, 0x2F, 0x0D, // 36=$:96 + 0x00, 0x8F, 0x4F, 0x15, // 37=%:143 + 0x00, 0xDE, 0x3B, 0x10, // 38=&:222 + 0x01, 0x19, 0x0A, 0x05, // 39=':281 + 0x01, 0x23, 0x1C, 0x08, // 40=(:291 + 0x01, 0x3F, 0x1B, 0x08, // 41=):319 + 0x01, 0x5A, 0x22, 0x09, // 42=*:346 + 0x01, 0x7C, 0x33, 0x0E, // 43=+:380 + 0x01, 0xAF, 0x10, 0x07, // 44=,:431 + 0x01, 0xBF, 0x1B, 0x08, // 45=-:447 + 0x01, 0xDA, 0x0F, 0x07, // 46=.:474 + 0x01, 0xE9, 0x1A, 0x07, // 47=/:489 + 0x02, 0x03, 0x2F, 0x0D, // 48=0:515 + 0x02, 0x32, 0x23, 0x0D, // 49=1:562 + 0x02, 0x55, 0x2F, 0x0D, // 50=2:597 + 0x02, 0x84, 0x2F, 0x0D, // 51=3:644 + 0x02, 0xB3, 0x2F, 0x0D, // 52=4:691 + 0x02, 0xE2, 0x2F, 0x0D, // 53=5:738 + 0x03, 0x11, 0x2F, 0x0D, // 54=6:785 + 0x03, 0x40, 0x2E, 0x0D, // 55=7:832 + 0x03, 0x6E, 0x2F, 0x0D, // 56=8:878 + 0x03, 0x9D, 0x2F, 0x0D, // 57=9:925 + 0x03, 0xCC, 0x0F, 0x07, // 58=::972 + 0x03, 0xDB, 0x10, 0x07, // 59=;:987 + 0x03, 0xEB, 0x2F, 0x0E, // 60=<:1003 + 0x04, 0x1A, 0x2F, 0x0E, // 61==:1050 + 0x04, 0x49, 0x2E, 0x0E, // 62=>:1097 + 0x04, 0x77, 0x2E, 0x0D, // 63=?:1143 + 0x04, 0xA5, 0x5C, 0x18, // 64=@:1189 + 0x05, 0x01, 0x3B, 0x0F, // 65=A:1281 + 0x05, 0x3C, 0x3B, 0x10, // 66=B:1340 + 0x05, 0x77, 0x3F, 0x11, // 67=C:1399 + 0x05, 0xB6, 0x3F, 0x11, // 68=D:1462 + 0x05, 0xF5, 0x3B, 0x10, // 69=E:1525 + 0x06, 0x30, 0x36, 0x0F, // 70=F:1584 + 0x06, 0x66, 0x43, 0x13, // 71=G:1638 + 0x06, 0xA9, 0x3B, 0x11, // 72=H:1705 + 0x06, 0xE4, 0x0F, 0x06, // 73=I:1764 + 0x06, 0xF3, 0x27, 0x0C, // 74=J:1779 + 0x07, 0x1A, 0x3F, 0x10, // 75=K:1818 + 0x07, 0x59, 0x2F, 0x0D, // 76=L:1881 + 0x07, 0x88, 0x43, 0x13, // 77=M:1928 + 0x07, 0xCB, 0x3B, 0x11, // 78=N:1995 + 0x08, 0x06, 0x47, 0x13, // 79=O:2054 + 0x08, 0x4D, 0x3A, 0x10, // 80=P:2125 + 0x08, 0x87, 0x48, 0x13, // 81=Q:2183 + 0x08, 0xCF, 0x3F, 0x11, // 82=R:2255 + 0x09, 0x0E, 0x3B, 0x10, // 83=S:2318 + 0x09, 0x49, 0x36, 0x0E, // 84=T:2377 + 0x09, 0x7F, 0x3B, 0x11, // 85=U:2431 + 0x09, 0xBA, 0x39, 0x0F, // 86=V:2490 + 0x09, 0xF3, 0x5A, 0x17, // 87=W:2547 + 0x0A, 0x4D, 0x3B, 0x0F, // 88=X:2637 + 0x0A, 0x88, 0x3D, 0x10, // 89=Y:2696 + 0x0A, 0xC5, 0x37, 0x0F, // 90=Z:2757 + 0x0A, 0xFC, 0x14, 0x07, // 91=[:2812 + 0x0B, 0x10, 0x1B, 0x07, // 92=\:2832 + 0x0B, 0x2B, 0x18, 0x07, // 93=]:2859 + 0x0B, 0x43, 0x2A, 0x0C, // 94=^:2883 + 0x0B, 0x6D, 0x34, 0x0D, // 95=_:2925 + 0x0B, 0xA1, 0x12, 0x08, // 96=`:2977 + 0x0B, 0xB3, 0x2F, 0x0D, // 97=a:2995 + 0x0B, 0xE2, 0x33, 0x0E, // 98=b:3042 + 0x0C, 0x15, 0x2B, 0x0C, // 99=c:3093 + 0x0C, 0x40, 0x2F, 0x0E, // 100=d:3136 + 0x0C, 0x6F, 0x2F, 0x0D, // 101=e:3183 + 0x0C, 0x9E, 0x1A, 0x07, // 102=f:3230 + 0x0C, 0xB8, 0x30, 0x0E, // 103=g:3256 + 0x0C, 0xE8, 0x2F, 0x0E, // 104=h:3304 + 0x0D, 0x17, 0x0F, 0x05, // 105=i:3351 + 0x0D, 0x26, 0x10, 0x06, // 106=j:3366 + 0x0D, 0x36, 0x2F, 0x0C, // 107=k:3382 + 0x0D, 0x65, 0x0F, 0x06, // 108=l:3429 + 0x0D, 0x74, 0x47, 0x14, // 109=m:3444 + 0x0D, 0xBB, 0x2F, 0x0E, // 110=n:3515 + 0x0D, 0xEA, 0x2F, 0x0D, // 111=o:3562 + 0x0E, 0x19, 0x33, 0x0E, // 112=p:3609 + 0x0E, 0x4C, 0x30, 0x0E, // 113=q:3660 + 0x0E, 0x7C, 0x1E, 0x08, // 114=r:3708 + 0x0E, 0x9A, 0x2B, 0x0C, // 115=s:3738 + 0x0E, 0xC5, 0x1B, 0x07, // 116=t:3781 + 0x0E, 0xE0, 0x2F, 0x0E, // 117=u:3808 + 0x0F, 0x0F, 0x2A, 0x0B, // 118=v:3855 + 0x0F, 0x39, 0x42, 0x11, // 119=w:3897 + 0x0F, 0x7B, 0x2B, 0x0B, // 120=x:3963 + 0x0F, 0xA6, 0x2A, 0x0C, // 121=y:4006 + 0x0F, 0xD0, 0x2B, 0x0C, // 122=z:4048 + 0x0F, 0xFB, 0x1C, 0x08, // 123={:4091 + 0x10, 0x17, 0x10, 0x06, // 124=|:4119 + 0x10, 0x27, 0x1B, 0x08, // 125=}:4135 + 0x10, 0x42, 0x33, 0x0E, // 126=~:4162 + 0xFF, 0xFF, 0x00, 0x12, // 127:65535 + 0x10, 0x75, 0x4F, 0x15, // 1026=� �..:4213 + 0x10, 0xC4, 0x32, 0x0D, // 1027=� �.:4292 + 0x10, 0xF6, 0x0C, 0x05, // 8218=��.�.:4342 + 0x11, 0x02, 0x22, 0x09, // 1107=�.�..:4354 + 0x11, 0x24, 0x1C, 0x08, // 8222=��.�.:4388 + 0x11, 0x40, 0x4B, 0x18, // 8230=��.�.:4416 + 0x11, 0x8B, 0x32, 0x0D, // 8224=��.� :4491 + 0x11, 0xBD, 0x33, 0x0D, // 8225=��.�.:4541 + 0x11, 0xF0, 0x2F, 0x0D, // 8364=��..�.:4592 + 0x12, 0x1F, 0x63, 0x1A, // 8240=��.��:4639 + 0x12, 0x82, 0x5F, 0x19, // 1033=� �.�:4738 + 0x12, 0xE1, 0x17, 0x08, // 8249=��.�..:4833 + 0x12, 0xF8, 0x5B, 0x18, // 1034=� �.:4856 + 0x13, 0x53, 0x37, 0x0E, // 1036=� �.:4947 + 0x13, 0x8A, 0x4F, 0x16, // 1035=� �..:5002 + 0x13, 0xD9, 0x3B, 0x11, // 1039=� �.:5081 + 0x14, 0x14, 0x30, 0x0E, // 1106=�.�..:5140 + 0x14, 0x44, 0x0A, 0x05, // 8216=��.Ч.:5188 + 0x14, 0x4E, 0x0A, 0x05, // 8217=��.�..:5198 + 0x14, 0x58, 0x1A, 0x08, // 8220=��.�.:5208 + 0x14, 0x72, 0x1A, 0x08, // 8221=��.�.:5234 + 0x14, 0x8C, 0x1B, 0x08, // 8226=��.�.:5260 + 0x14, 0xA7, 0x33, 0x0D, // 8211=��.�..:5287 + 0x14, 0xDA, 0x5F, 0x18, // 8212=��.�..:5338 + 0xFF, 0xFF, 0x00, 0x12, // 65533=��.�.:65535 + 0x15, 0x39, 0x5B, 0x18, // 8482=��..�.:5433 + 0x15, 0x94, 0x53, 0x16, // 1113=�.�..:5524 + 0x15, 0xE7, 0x1B, 0x08, // 8250=��.�.:5607 + 0x16, 0x02, 0x4B, 0x14, // 1114=�.�.:5634 + 0x16, 0x4D, 0x2B, 0x0B, // 1116=�.�.:5709 + 0x16, 0x78, 0x2F, 0x0E, // 1115=�.�.�:5752 + 0x16, 0xA7, 0x2F, 0x0D, // 1119=�.�.:5799 + 0xFF, 0xFF, 0x00, 0x07, // 160=�.� :65535 + 0x16, 0xD6, 0x36, 0x0F, // 1038=� �.:5846 + 0x17, 0x0C, 0x2A, 0x0C, // 1118=�.�.:5900 + 0x17, 0x36, 0x27, 0x0C, // 1032=� �..:5942 + 0x17, 0x5D, 0x33, 0x0D, // 164=�.�.:5981 + 0x17, 0x90, 0x2A, 0x0C, // 1168=�.�.:6032 + 0x17, 0xBA, 0x10, 0x06, // 166=�.�.:6074 + 0x17, 0xCA, 0x2F, 0x0D, // 167=�.�.:6090 + 0x17, 0xF9, 0x3B, 0x10, // 1025=� �.:6137 + 0x18, 0x34, 0x47, 0x12, // 169=�.��:6196 + 0x18, 0x7B, 0x3F, 0x11, // 1028=� �..:6267 + 0x18, 0xBA, 0x27, 0x0D, // 171=�.�.:6330 + 0x18, 0xE1, 0x2F, 0x0E, // 172=�.�.:6369 + 0x19, 0x10, 0x1B, 0x08, // 173=�.�:6416 + 0x19, 0x2B, 0x47, 0x12, // 174=�.�.:6443 + 0x19, 0x72, 0x15, 0x06, // 1031=� �..:6514 + 0x19, 0x87, 0x1E, 0x0A, // 176=�.��:6535 + 0x19, 0xA5, 0x33, 0x0D, // 177=�.�.:6565 + 0x19, 0xD8, 0x0F, 0x06, // 1030=� �. :6616 + 0x19, 0xE7, 0x0F, 0x05, // 1110=�.�..:6631 + 0x19, 0xF6, 0x22, 0x0A, // 1169=�.�.:6646 + 0x1A, 0x18, 0x2F, 0x0E, // 181=�.�.:6680 + 0x1A, 0x47, 0x32, 0x0D, // 182=�.�.:6727 + 0x1A, 0x79, 0x13, 0x08, // 183=�.��:6777 + 0x1A, 0x8C, 0x2F, 0x0D, // 1105=�.�.:6796 + 0x1A, 0xBB, 0x63, 0x1A, // 8470=��..�..:6843 + 0x1B, 0x1E, 0x2B, 0x0C, // 1108=�.�..:6942 + 0x1B, 0x49, 0x2F, 0x0D, // 187=�.�.:6985 + 0x1B, 0x78, 0x10, 0x06, // 1112=�.Ч.:7032 + 0x1B, 0x88, 0x3B, 0x10, // 1029=� �..:7048 + 0x1B, 0xC3, 0x2B, 0x0C, // 1109=�.�..:7107 + 0x1B, 0xEE, 0x16, 0x06, // 1111=�.�..:7150 + 0x1C, 0x04, 0x3B, 0x0F, // 1040=� �.:7172 + 0x1C, 0x3F, 0x3B, 0x10, // 1041=� �.:7231 + 0x1C, 0x7A, 0x3B, 0x10, // 1042=� �..:7290 + 0x1C, 0xB5, 0x32, 0x0D, // 1043=� �..:7349 + 0x1C, 0xE7, 0x40, 0x10, // 1044=� �..:7399 + 0x1D, 0x27, 0x3B, 0x10, // 1045=� �..:7463 + 0x1D, 0x62, 0x57, 0x16, // 1046=� �..:7522 + 0x1D, 0xB9, 0x37, 0x0F, // 1047=� �..:7609 + 0x1D, 0xF0, 0x3B, 0x11, // 1048=� Ч.:7664 + 0x1E, 0x2B, 0x3B, 0x11, // 1049=� �..:7723 + 0x1E, 0x66, 0x37, 0x0E, // 1050=� �.:7782 + 0x1E, 0x9D, 0x37, 0x10, // 1051=� �.�:7837 + 0x1E, 0xD4, 0x43, 0x13, // 1052=� �.:7892 + 0x1F, 0x17, 0x3B, 0x11, // 1053=� �.:7959 + 0x1F, 0x52, 0x47, 0x13, // 1054=� �.:8018 + 0x1F, 0x99, 0x3B, 0x11, // 1055=� �.:8089 + 0x1F, 0xD4, 0x3A, 0x10, // 1056=� � :8148 + 0x20, 0x0E, 0x3F, 0x11, // 1057=� �.:8206 + 0x20, 0x4D, 0x36, 0x0E, // 1058=� �.:8269 + 0x20, 0x83, 0x36, 0x0F, // 1059=� �.:8323 + 0x20, 0xB9, 0x43, 0x12, // 1060=� �.:8377 + 0x20, 0xFC, 0x3B, 0x0F, // 1061=� �.:8444 + 0x21, 0x37, 0x44, 0x12, // 1062=� �.:8503 + 0x21, 0x7B, 0x37, 0x10, // 1063=� �.:8571 + 0x21, 0xB2, 0x53, 0x16, // 1064=� �.:8626 + 0x22, 0x05, 0x5C, 0x17, // 1065=� ��:8709 + 0x22, 0x61, 0x47, 0x13, // 1066=� �.:8801 + 0x22, 0xA8, 0x4B, 0x15, // 1067=� �.:8872 + 0x22, 0xF3, 0x3B, 0x10, // 1068=� �.:8947 + 0x23, 0x2E, 0x3F, 0x11, // 1069=� �:9006 + 0x23, 0x6D, 0x5B, 0x18, // 1070=� �.:9069 + 0x23, 0xC8, 0x3B, 0x11, // 1071=� �.:9160 + 0x24, 0x03, 0x2F, 0x0D, // 1072=� ��:9219 + 0x24, 0x32, 0x33, 0x0E, // 1073=� �.:9266 + 0x24, 0x65, 0x2F, 0x0D, // 1074=� �.:9317 + 0x24, 0x94, 0x22, 0x09, // 1075=� �.:9364 + 0x24, 0xB6, 0x34, 0x0E, // 1076=� �.:9398 + 0x24, 0xEA, 0x2F, 0x0D, // 1077=� �.:9450 + 0x25, 0x19, 0x3B, 0x10, // 1078=� �.:9497 + 0x25, 0x54, 0x27, 0x0B, // 1079=� ��:9556 + 0x25, 0x7B, 0x2F, 0x0D, // 1080=� �.:9595 + 0x25, 0xAA, 0x2F, 0x0D, // 1081=� �..:9642 + 0x25, 0xD9, 0x2B, 0x0B, // 1082=� �.:9689 + 0x26, 0x04, 0x2F, 0x0E, // 1083=� �.:9732 + 0x26, 0x33, 0x3B, 0x11, // 1084=� �:9779 + 0x26, 0x6E, 0x2F, 0x0D, // 1085=� �.:9838 + 0x26, 0x9D, 0x2F, 0x0D, // 1086=� �.:9885 + 0x26, 0xCC, 0x2F, 0x0D, // 1087=� �.:9932 + 0x26, 0xFB, 0x33, 0x0E, // 1088=�.�.:9979 + 0x27, 0x2E, 0x2B, 0x0C, // 1089=�.�.:10030 + 0x27, 0x59, 0x26, 0x0B, // 1090=�.�..:10073 + 0x27, 0x7F, 0x2A, 0x0C, // 1091=�.�.:10111 + 0x27, 0xA9, 0x4B, 0x14, // 1092=�.�..:10153 + 0x27, 0xF4, 0x2B, 0x0B, // 1093=�.�..:10228 + 0x28, 0x1F, 0x34, 0x0E, // 1094=�.�. :10271 + 0x28, 0x53, 0x2B, 0x0D, // 1095=�.�..:10323 + 0x28, 0x7E, 0x47, 0x13, // 1096=�.�..:10366 + 0x28, 0xC5, 0x4C, 0x14, // 1097=�.�.�:10437 + 0x29, 0x11, 0x37, 0x0F, // 1098=�.�.:10513 + 0x29, 0x48, 0x3B, 0x11, // 1099=�.�..:10568 + 0x29, 0x83, 0x2F, 0x0D, // 1100=�.�.:10627 + 0x29, 0xB2, 0x2B, 0x0C, // 1101=�.�.:10674 + 0x29, 0xDD, 0x43, 0x12, // 1102=�.�.:10717 + 0x2A, 0x20, 0x2B, 0x0D, // 1103=�.�.:10784 + // Font Data: + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xCF, 0x00, 0x80, 0xFF, 0xCF, // 33 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x1F, 0x00, 0x00, 0x80, 0x1F, // 34 + 0x00, 0x30, 0x0C, 0x00, 0x00, 0x30, 0xCC, 0x00, 0x00, 0x30, 0xFE, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0xFE, 0x0F, 0x00, 0x80, + 0x3F, 0x0C, 0x00, 0x80, 0x31, 0xCC, 0x00, 0x00, 0x30, 0xFE, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0xFE, 0x0D, 0x00, 0x80, 0x3F, + 0x0C, 0x00, 0x80, 0x31, 0x0C, 0x00, 0x00, 0x30, 0x0C, // 35 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x18, 0x00, 0x00, 0x3F, 0x78, 0x00, 0x00, 0x63, 0x70, 0x00, 0x80, 0x61, 0xE0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0xC0, 0xFF, 0xFF, 0x03, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x81, 0xC1, 0x00, 0x00, 0x83, 0x61, 0x00, 0x00, 0x07, + 0x7F, 0x00, 0x00, 0x04, 0x1E, // 36 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x80, + 0x80, 0x80, 0x00, 0x80, 0xC1, 0xE0, 0x00, 0x00, 0x7F, 0x78, 0x00, 0x00, 0x3E, 0x3E, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0xC0, + 0x03, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x3C, 0x3E, 0x00, 0x00, 0x0F, 0x7F, 0x00, 0x80, 0x83, 0xC1, 0x00, 0x80, 0x80, 0x80, + 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x00, 0x3E, // 37 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x8E, 0x73, 0x00, 0x00, 0xDF, 0xE1, 0x00, 0x80, + 0xF3, 0xC0, 0x00, 0x80, 0xE1, 0xC0, 0x00, 0x80, 0xE1, 0xC1, 0x00, 0x80, 0xB3, 0xE3, 0x00, 0x00, 0x3F, 0x6E, 0x00, 0x00, 0x0E, + 0x7C, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x00, 0xE2, 0x00, 0x00, 0x00, 0x40, // 38 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x80, 0x1F, // 39 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x3F, 0x00, 0x00, 0xF8, 0xFF, 0x01, 0x00, 0x3E, 0xC0, 0x07, 0x00, 0x07, 0x00, 0x0E, 0x80, + 0x01, 0x00, 0x18, 0x80, 0x00, 0x00, 0x10, // 40 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x10, 0x80, 0x01, 0x00, 0x18, 0x00, 0x07, 0x00, 0x0E, 0x00, 0x3E, 0xC0, 0x07, 0x00, + 0xF8, 0xFF, 0x01, 0x00, 0xC0, 0x3F, // 41 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x80, + 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x02, // 42 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, + 0x80, 0x01, 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0xFC, 0x3F, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 43 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x0C, 0x00, 0x00, 0xC0, 0x07, // 44 + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 45 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, // 46 + 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x80, + 0x0F, 0x00, 0x00, 0x80, 0x01, // 47 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x07, 0x70, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x80, + 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xF8, 0x0F, // 48 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 49 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0xC0, 0x00, 0x00, 0x0F, 0xE0, 0x00, 0x00, 0x03, 0xF0, 0x00, 0x80, 0x01, 0xD8, 0x00, 0x80, + 0x01, 0xCC, 0x00, 0x80, 0x01, 0xC6, 0x00, 0x80, 0x01, 0xC3, 0x00, 0x80, 0x81, 0xC1, 0x00, 0x00, 0xC3, 0xC0, 0x00, 0x00, 0x7F, + 0xC0, 0x00, 0x00, 0x3C, 0xC0, // 50 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x04, 0x18, 0x00, 0x00, 0x07, 0x38, 0x00, 0x00, 0x03, 0x70, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x00, 0xE3, 0xC0, 0x00, 0x00, 0xBF, 0x61, 0x00, 0x00, 0x1E, + 0x3F, 0x00, 0x00, 0x00, 0x1E, // 51 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xF0, 0x0C, 0x00, 0x00, + 0x38, 0x0C, 0x00, 0x00, 0x1E, 0x0C, 0x00, 0x00, 0x07, 0x0C, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, + 0x0C, 0x00, 0x00, 0x00, 0x0C, // 52 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x18, 0x00, 0x00, 0xFE, 0x38, 0x00, 0x80, 0x7F, 0x60, 0x00, 0x80, 0x21, 0xC0, 0x00, 0x80, + 0x31, 0xC0, 0x00, 0x80, 0x31, 0xC0, 0x00, 0x80, 0x31, 0xC0, 0x00, 0x80, 0x31, 0xC0, 0x00, 0x80, 0x61, 0x70, 0x00, 0x80, 0xC1, + 0x3F, 0x00, 0x00, 0x80, 0x0F, // 53 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x0F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x8F, 0x71, 0x00, 0x00, 0xC3, 0xE0, 0x00, 0x80, + 0x61, 0xC0, 0x00, 0x80, 0x61, 0xC0, 0x00, 0x80, 0x61, 0xC0, 0x00, 0x80, 0x61, 0xC0, 0x00, 0x80, 0xC3, 0x60, 0x00, 0x00, 0xC7, + 0x3F, 0x00, 0x00, 0x06, 0x1F, // 54 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, + 0x01, 0xFE, 0x00, 0x80, 0xC1, 0x0F, 0x00, 0x80, 0xE1, 0x01, 0x00, 0x80, 0x39, 0x00, 0x00, 0x80, 0x0D, 0x00, 0x00, 0x80, 0x07, + 0x00, 0x00, 0x80, 0x01, // 55 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x1E, 0x7F, 0x00, 0x00, 0xBF, 0x61, 0x00, 0x80, 0xE3, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xE3, 0xC0, 0x00, 0x00, 0xBF, 0x61, 0x00, 0x00, 0x1E, + 0x7F, 0x00, 0x00, 0x00, 0x1E, // 56 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x7C, 0x30, 0x00, 0x00, 0xFE, 0x71, 0x00, 0x00, 0x87, 0xE1, 0x00, 0x80, 0x01, 0xC3, 0x00, 0x80, + 0x01, 0xC3, 0x00, 0x80, 0x01, 0xC3, 0x00, 0x80, 0x01, 0xC3, 0x00, 0x80, 0x81, 0x61, 0x00, 0x00, 0xC7, 0x78, 0x00, 0x00, 0xFE, + 0x3F, 0x00, 0x00, 0xF8, 0x07, // 57 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, // 58 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0xC0, 0x0C, 0x00, 0x18, 0xC0, 0x07, // 59 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, + 0x60, 0x03, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x18, + 0x0C, 0x00, 0x00, 0x0C, 0x18, // 60 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, + 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x30, + 0x06, 0x00, 0x00, 0x30, 0x06, // 61 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x18, 0x0C, 0x00, 0x00, 0x10, 0x04, 0x00, 0x00, + 0x30, 0x06, 0x00, 0x00, 0x30, 0x06, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0x40, 0x01, 0x00, 0x00, 0xC0, + 0x01, 0x00, 0x00, 0x80, // 62 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x80, + 0x01, 0xCE, 0x00, 0x80, 0x01, 0xCF, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x00, 0xE3, 0x00, 0x00, 0x00, 0x7F, + 0x00, 0x00, 0x00, 0x1C, // 63 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xE0, 0xFF, 0x00, 0x00, 0x78, 0xC0, 0x03, 0x00, 0x1C, 0x00, 0x07, 0x00, + 0x0E, 0x1F, 0x06, 0x00, 0xC7, 0x7F, 0x0E, 0x00, 0xE3, 0x60, 0x0C, 0x00, 0x33, 0xC0, 0x0C, 0x80, 0x39, 0xC0, 0x18, 0x80, 0x19, + 0xC0, 0x18, 0x80, 0x19, 0x60, 0x18, 0x80, 0x19, 0x30, 0x18, 0x80, 0x31, 0x78, 0x18, 0x80, 0xE1, 0xFF, 0x18, 0x80, 0xFB, 0xC7, + 0x18, 0x00, 0x3B, 0xC0, 0x18, 0x00, 0x07, 0x60, 0x0C, 0x00, 0x0E, 0x70, 0x0C, 0x00, 0x1C, 0x3C, 0x06, 0x00, 0xF8, 0x1F, 0x06, + 0x00, 0xE0, 0x07, 0x03, 0x00, 0x00, 0x00, 0x01, // 64 + 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, + 0x3E, 0x06, 0x00, 0x80, 0x0F, 0x06, 0x00, 0x80, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x06, 0x00, 0x00, 0x3E, 0x06, 0x00, 0x00, 0xF8, + 0x07, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xC0, // 65 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x00, 0xE3, 0xC1, 0x00, 0x00, 0xFF, 0x61, 0x00, 0x00, 0x1E, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 66 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x0E, 0x3C, 0x00, 0x00, 0x08, + 0x0C, // 67 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, + 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF0, + 0x07, // 68 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x01, 0xC0, // 69 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, + 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, + 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0x01, // 70 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x03, 0x60, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x81, + 0xC1, 0x00, 0x80, 0x81, 0xC1, 0x00, 0x80, 0x83, 0xC1, 0x00, 0x00, 0x83, 0x61, 0x00, 0x00, 0x87, 0x61, 0x00, 0x00, 0x8E, 0x3F, + 0x00, 0x00, 0x88, 0x3F, // 71 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 72 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 73 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x3F, // 74 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, + 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x9C, 0x07, 0x00, 0x00, 0x0E, + 0x1E, 0x00, 0x00, 0x07, 0x3C, 0x00, 0x80, 0x03, 0x78, 0x00, 0x80, 0x01, 0xE0, 0x00, 0x80, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0x80, // 75 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, // 76 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, + 0x3F, 0x00, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xFC, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x80, 0xFF, 0xFF, + 0x00, 0x80, 0xFF, 0xFF, // 77 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x07, 0x00, 0x00, 0x00, + 0x0E, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, + 0x0E, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 78 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x1E, 0x3C, + 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF0, 0x07, // 79 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, + 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, + 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x3C, // 80 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x30, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x03, 0x60, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xD8, 0x00, 0x80, 0x01, 0xD8, 0x00, 0x80, 0x03, 0xF0, 0x00, 0x00, 0x03, 0x70, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x1E, 0xFC, + 0x00, 0x00, 0xFC, 0xDF, 0x01, 0x00, 0xF0, 0x87, 0x01, // 81 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, + 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x01, 0x00, 0x80, 0xC1, 0x03, 0x00, 0x80, 0xC1, + 0x0F, 0x00, 0x80, 0xC1, 0x1E, 0x00, 0x80, 0x63, 0x7C, 0x00, 0x00, 0x7F, 0xF0, 0x00, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x00, + 0x80, // 82 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1C, 0x3C, 0x00, 0x00, 0x7F, 0x70, 0x00, 0x00, 0x63, 0x60, 0x00, 0x80, + 0xE1, 0xE0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC1, 0x00, 0x80, 0x83, 0xE1, 0x00, 0x00, 0x87, 0x63, 0x00, 0x00, 0x0E, 0x3F, 0x00, 0x00, 0x0C, 0x1E, // 83 + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 84 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0x0F, 0x00, 0x80, 0xFF, 0x3F, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, + 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x70, 0x00, 0x80, 0xFF, 0x3F, 0x00, 0x80, 0xFF, 0x0F, // 85 + 0x80, 0x00, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, + 0x00, 0x3F, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0xE0, + 0x07, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x80, // 86 + 0x80, 0x01, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0xFE, 0x03, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x80, 0x0F, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0x80, 0x3F, + 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xFE, 0x03, 0x00, + 0x80, 0x1F, 0x00, 0x00, 0x80, 0x01, // 87 + 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0xC0, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x07, 0x78, 0x00, 0x00, 0x0F, 0x1E, 0x00, 0x00, + 0x3C, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0x1E, 0x0F, 0x00, 0x00, 0x0F, + 0x1C, 0x00, 0x80, 0x07, 0x78, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x80, // 88 + 0x80, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, + 0x78, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xC0, 0xFF, 0x00, 0x00, 0xC0, 0xFF, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x78, + 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, // 89 + 0x00, 0x00, 0xC0, 0x00, 0x80, 0x01, 0xE0, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x01, 0xDC, 0x00, 0x80, 0x01, 0xCE, 0x00, 0x80, + 0x01, 0xC7, 0x00, 0x80, 0x81, 0xC3, 0x00, 0x80, 0xE1, 0xC0, 0x00, 0x80, 0x71, 0xC0, 0x00, 0x80, 0x39, 0xC0, 0x00, 0x80, 0x1D, + 0xC0, 0x00, 0x80, 0x07, 0xC0, 0x00, 0x80, 0x03, 0xC0, 0x00, 0x80, 0x01, 0xC0, // 90 + 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x1F, 0x80, 0xFF, 0xFF, 0x1F, 0x80, 0x01, 0x00, 0x18, 0x80, 0x01, 0x00, 0x18, // 91 + 0x80, 0x01, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0xFE, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, + 0x00, 0xF8, 0x00, 0x00, 0x00, 0xC0, // 92 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x18, 0x80, 0x01, 0x00, 0x18, 0x80, 0xFF, 0xFF, 0x1F, 0x80, + 0xFF, 0xFF, 0x1F, // 93 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x80, + 0x03, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, + 0x80, // 94 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, + 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, + 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, // 95 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00, 0x02, // 96 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x38, 0x00, 0x00, 0x70, 0x7C, 0x00, 0x00, 0x30, 0xE6, 0x00, 0x00, 0x18, 0xC6, 0x00, 0x00, + 0x18, 0xC6, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0x63, 0x00, 0x00, 0x38, 0x63, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x00, 0xE0, + 0xFF, 0x00, 0x00, 0x00, 0x80, // 97 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, + 0x30, 0x60, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, + 0x70, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x80, 0x0F, // 98 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x60, + 0x30, // 99 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x30, 0x60, 0x00, 0x00, 0x70, 0x30, 0x00, 0x80, 0xFF, + 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 100 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x73, 0x00, 0x00, 0x38, 0xE3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x38, 0xE3, 0x00, 0x00, 0x70, 0x63, 0x00, 0x00, 0xE0, + 0x33, 0x00, 0x00, 0xC0, 0x13, // 101 + 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x19, 0x00, 0x00, 0x80, + 0x19, 0x00, 0x00, 0x80, 0x19, // 102 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x0F, 0x06, 0x00, 0xE0, 0x3F, 0x0E, 0x00, 0x70, 0x70, 0x1C, 0x00, 0x38, 0xE0, 0x18, 0x00, + 0x18, 0xC0, 0x18, 0x00, 0x18, 0xC0, 0x18, 0x00, 0x18, 0xC0, 0x18, 0x00, 0x30, 0x60, 0x1C, 0x00, 0x60, 0x30, 0x0E, 0x00, 0xF8, + 0xFF, 0x07, 0x00, 0xF8, 0xFF, 0x03, // 103 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, + 0xFF, 0x00, 0x00, 0xE0, 0xFF, // 104 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xF9, 0xFF, 0x00, 0x80, 0xF9, 0xFF, // 105 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x80, 0xF9, 0xFF, 0x1F, 0x80, 0xF9, 0xFF, 0x0F, // 106 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x80, 0x03, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0x60, 0x1E, 0x00, 0x00, 0x30, 0x38, 0x00, 0x00, 0x18, 0xF0, 0x00, 0x00, 0x08, + 0xC0, 0x00, 0x00, 0x00, 0x80, // 107 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 108 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x10, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, 0xFF, 0x00, 0x00, 0xE0, + 0xFF, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x38, 0x00, + 0x00, 0x00, 0xF0, 0xFF, 0x00, 0x00, 0xE0, 0xFF, // 109 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, + 0xFF, 0x00, 0x00, 0xE0, 0xFF, // 110 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, + 0x3F, 0x00, 0x00, 0xC0, 0x1F, // 111 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0x60, 0x30, 0x00, 0x00, + 0x30, 0x60, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, + 0x70, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xC0, 0x0F, // 112 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x30, 0x60, 0x00, 0x00, 0x60, 0x30, 0x00, 0x00, 0xF8, + 0xFF, 0x1F, 0x00, 0xF8, 0xFF, 0x1F, // 113 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, // 114 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x30, 0x00, 0x00, 0xF0, 0x71, 0x00, 0x00, 0xB8, 0xE3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC7, 0x00, 0x00, 0x18, 0xC7, 0x00, 0x00, 0x38, 0xE6, 0x00, 0x00, 0x70, 0x7E, 0x00, 0x00, 0x60, + 0x3C, // 115 + 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, // 116 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x3F, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 117 + 0x00, 0x18, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, + 0x00, 0xE0, 0x00, 0x00, 0x00, 0x7C, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, + 0x18, // 118 + 0x00, 0x38, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, + 0x00, 0x7E, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x80, + 0x0F, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xF8, 0x01, + 0x00, 0x00, 0x38, // 119 + 0x00, 0x08, 0x80, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x78, 0xF0, 0x00, 0x00, 0xE0, 0x38, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x38, 0x00, 0x00, 0x70, 0xF0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x08, + 0x80, // 120 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x18, 0x00, 0xC0, 0x07, 0x18, 0x00, 0x00, 0x3E, 0x1C, 0x00, + 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x7F, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, + 0x18, // 121 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x18, 0xF0, 0x00, 0x00, 0x18, 0xF8, 0x00, 0x00, 0x18, 0xDC, 0x00, 0x00, + 0x18, 0xCF, 0x00, 0x00, 0x98, 0xC3, 0x00, 0x00, 0xD8, 0xC1, 0x00, 0x00, 0xF8, 0xC0, 0x00, 0x00, 0x78, 0xC0, 0x00, 0x00, 0x18, + 0xC0, // 122 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0xFF, 0xF9, 0x0F, 0x80, 0xFF, 0xF0, 0x1F, 0x80, + 0x01, 0x00, 0x18, 0x80, 0x01, 0x00, 0x18, // 123 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x3F, 0x80, 0xFF, 0xFF, 0x3F, // 124 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x18, 0x80, 0x01, 0x00, 0x18, 0x80, 0xFF, 0xF0, 0x1F, 0x00, 0xFF, 0xFD, 0x0F, 0x00, + 0x00, 0x0F, 0x00, 0x00, 0x00, 0x06, // 125 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, + 0x03, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0x80, 0x01, // 126 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, + 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x61, 0x60, 0x00, 0x80, 0x61, 0xC0, 0x00, 0x80, 0x61, 0xC0, 0x00, 0x00, 0x60, 0xC0, + 0x00, 0x00, 0xE0, 0xE0, 0x00, 0x00, 0xC0, 0x71, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0x00, 0x1F, // 1026 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0xA0, 0x01, 0x00, 0x00, 0xB8, 0x01, 0x00, 0x00, 0x98, 0x01, 0x00, 0x00, 0x88, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 1027 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x0C, 0x00, 0x00, 0xC0, 0x07, // 8218 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x1A, 0x00, 0x00, 0x80, + 0x1B, 0x00, 0x00, 0x80, 0x19, 0x00, 0x00, 0x80, 0x18, 0x00, 0x00, 0x00, 0x18, // 1107 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x0C, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xC0, 0x0C, 0x00, 0x00, 0xC0, 0x07, // 8222 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, // 8230 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x0F, 0x80, 0xFF, 0xFF, 0x0F, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, + 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, // 8224 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x0F, 0x80, 0xFF, 0xFF, 0x0F, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, + 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, // 8225 + 0x00, 0x30, 0x03, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xFE, 0x1F, 0x00, 0x00, 0x36, 0x3B, 0x00, 0x00, 0x33, 0x73, 0x00, 0x00, + 0x33, 0x63, 0x00, 0x80, 0x31, 0xC3, 0x00, 0x80, 0x31, 0xC3, 0x00, 0x80, 0x31, 0xC3, 0x00, 0x80, 0x31, 0xC3, 0x00, 0x80, 0x31, + 0xC0, 0x00, 0x00, 0x03, 0x60, // 8364 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x80, + 0xC1, 0xE0, 0x00, 0x00, 0x7F, 0xF8, 0x00, 0x00, 0x3E, 0x3E, 0x00, 0x00, 0xC0, 0x07, 0x00, 0x00, 0xF0, 0x01, 0x00, 0x00, 0x3E, + 0x3E, 0x00, 0x80, 0x0F, 0x7F, 0x00, 0x80, 0x81, 0xC1, 0x00, 0x00, 0x80, 0x80, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x00, 0x7F, + 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x80, 0xC1, 0x00, + 0x00, 0x80, 0x80, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x00, 0x7F, 0x00, 0x00, 0x00, 0x3E, // 8240 + 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x3F, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, + 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1033 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xE0, 0x3D, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, + 0x10, 0x40, // 8249 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, + 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, 0x61, 0x00, + 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1034 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x20, 0x60, 0x03, 0x00, 0x38, 0x78, 0x07, 0x00, 0x18, 0x1E, 0x0E, 0x00, 0x08, 0x07, + 0x38, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0x80, // 1036 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, + 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x00, 0x60, 0x00, + 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xC0, 0xFF, 0x00, 0x00, 0x00, 0xFF, // 1035 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1039 + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x73, 0x00, 0x00, 0x00, + 0x33, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x18, 0x00, 0x18, 0x00, 0x18, 0x00, 0x38, 0x00, 0x18, 0x00, 0xF0, + 0xFF, 0x1F, 0x00, 0xE0, 0xFF, 0x0F, // 1106 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x80, 0x19, // 8216 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x19, 0x00, 0x00, 0x80, 0x0F, // 8217 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, 0x00, 0x00, 0x80, 0x19, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x1F, 0x00, 0x00, 0x80, 0x19, // 8220 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x19, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, + 0x19, 0x00, 0x00, 0x80, 0x0F, // 8221 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x03, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, 0xE0, 0x07, 0x00, 0x00, + 0xE0, 0x07, 0x00, 0x00, 0xC0, 0x03, // 8226 + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 8211 + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, + 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, + 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 8212 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, 0x03, 0x00, 0x00, 0x00, 0x1E, 0x00, + 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, + 0x80, 0xFF, 0x01, 0x00, 0x80, 0xFF, 0x01, // 8482 + 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, + 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, + 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xE7, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, + 0x3C, // 1113 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x40, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, 0x3D, 0x00, 0x00, + 0x80, 0x0F, 0x00, 0x00, 0x00, 0x02, // 8250 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, + 0x00, 0x00, 0x00, 0xE7, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x3C, // 1114 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x02, 0x02, 0x00, 0x80, + 0x03, 0x07, 0x00, 0x80, 0xC1, 0x0D, 0x00, 0x80, 0xF0, 0x38, 0x00, 0x00, 0x18, 0x70, 0x00, 0x00, 0x18, 0xE0, 0x00, 0x00, 0x00, + 0x80, // 1116 + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x73, 0x00, 0x00, 0x00, + 0x33, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x1B, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, + 0xFF, 0x00, 0x00, 0xE0, 0xFF, // 1115 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1119 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x1E, 0xC0, 0x00, 0x18, 0x78, 0xC0, 0x00, 0x30, + 0xE0, 0xC1, 0x00, 0x20, 0x80, 0x77, 0x00, 0x20, 0x00, 0x3E, 0x00, 0x20, 0x80, 0x07, 0x00, 0x30, 0xE0, 0x01, 0x00, 0x18, 0x78, + 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x80, 0x01, // 1038 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x18, 0x80, 0xC1, 0x07, 0x18, 0x00, 0x03, 0x3E, 0x1C, 0x00, + 0x02, 0xF8, 0x0F, 0x00, 0x02, 0xF0, 0x03, 0x00, 0x02, 0x7F, 0x00, 0x00, 0xE3, 0x0F, 0x00, 0x80, 0xF9, 0x00, 0x00, 0x00, + 0x18, // 1118 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x3F, // 1032 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x10, 0x00, 0x00, 0xDC, 0x3B, 0x00, 0x00, 0xF8, 0x1F, 0x00, 0x00, 0x30, 0x0C, 0x00, 0x00, + 0x18, 0x18, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x18, 0x18, 0x00, 0x00, 0x30, 0x0C, 0x00, 0x00, 0xF8, + 0x1F, 0x00, 0x00, 0xDC, 0x3B, 0x00, 0x00, 0x08, 0x10, // 164 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xFC, 0x01, 0x00, 0x00, 0xFC, + 0x01, // 1168 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xE1, 0x3F, 0x80, 0xFF, 0xE1, 0x3F, // 166 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x03, 0x00, 0x00, 0xCE, 0x07, 0x03, 0x00, 0x7F, 0x0C, 0x0F, 0x80, 0x33, 0x1C, 0x0C, 0x80, + 0x71, 0x18, 0x18, 0x80, 0x61, 0x30, 0x18, 0x80, 0xC1, 0x70, 0x18, 0x80, 0xC3, 0xE1, 0x1C, 0x00, 0x87, 0xD3, 0x0F, 0x00, 0x06, + 0x9F, 0x07, 0x00, 0x00, 0x0E, // 167 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0xB0, + 0xC1, 0xC0, 0x00, 0xB0, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0xB0, 0xC1, 0xC0, 0x00, 0xB0, 0xC1, + 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x01, 0xC0, // 1025 + 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0xE7, 0x71, 0x00, 0x00, + 0xFB, 0x67, 0x00, 0x80, 0x19, 0xC6, 0x00, 0x80, 0x0D, 0xCC, 0x00, 0x80, 0x0D, 0xCC, 0x00, 0x80, 0x0D, 0xCC, 0x00, 0x80, 0x0D, + 0xCC, 0x00, 0x80, 0x1D, 0xCE, 0x00, 0x00, 0x1B, 0x66, 0x00, 0x00, 0x17, 0x72, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x1C, 0x1C, + 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xE0, 0x03, // 169 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xCE, 0x3C, 0x00, 0x00, 0xC7, 0x70, 0x00, 0x00, + 0xC3, 0x60, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x0F, 0x78, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x08, + 0x08, // 1028 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xE0, 0x3D, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, + 0x10, 0x42, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0xE0, 0x3D, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x10, 0x40, // 171 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0xF0, + 0x07, 0x00, 0x00, 0xF0, 0x07, // 172 + 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, + 0x00, 0x06, 0x00, 0x00, 0x00, 0x06, // 173 + 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0xFB, 0x6F, 0x00, 0x80, 0xF9, 0xCF, 0x00, 0x80, 0x99, 0xC1, 0x00, 0x80, 0x99, 0xC1, 0x00, 0x80, 0x99, 0xC3, 0x00, 0x80, 0xF9, + 0xC7, 0x00, 0x80, 0xF1, 0xCC, 0x00, 0x00, 0x03, 0x68, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x1C, 0x1C, + 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xE0, 0x03, // 174 + 0x30, 0x00, 0x00, 0x00, 0x30, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x30, 0x00, 0x00, 0x00, + 0x30, // 1031 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00, 0x80, 0x20, 0x00, 0x00, 0x80, + 0x20, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x0E, // 176 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, + 0x80, 0xC1, 0x00, 0x00, 0xFC, 0xFF, 0x00, 0x00, 0xFC, 0xFF, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, + 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, // 177 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1030 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xF9, 0xFF, 0x00, 0x80, 0xF9, 0xFF, // 1110 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x80, 0x1F, // 1169 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0x00, 0x60, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x60, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 181 + 0x00, 0x3C, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x80, + 0xFF, 0xFF, 0x1F, 0x80, 0xFF, 0xFF, 0x1F, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x1F, 0x80, 0xFF, + 0xFF, 0x1F, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 182 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 183 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x73, 0x00, 0x00, 0x3B, 0xE3, 0x00, 0x00, + 0x1B, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x3B, 0xE3, 0x00, 0x00, 0x73, 0x63, 0x00, 0x00, 0xE0, + 0x33, 0x00, 0x00, 0xC0, 0x13, // 1105 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x00, + 0x1C, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, + 0x0E, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x00, 0x78, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x63, 0x00, 0x00, 0xF0, 0x67, 0x00, 0x00, 0x38, 0x6E, 0x00, 0x00, 0x18, 0x6C, 0x00, + 0x00, 0x18, 0x6C, 0x00, 0x00, 0x38, 0x6E, 0x00, 0x00, 0xF0, 0x67, 0x00, 0x00, 0xE0, 0x63, // 8470 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x00, 0x70, 0x73, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0x60, 0x00, 0x00, 0x70, 0x78, 0x00, 0x00, 0x60, + 0x18, // 1108 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x40, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, + 0xE0, 0x3D, 0x00, 0x00, 0x80, 0x0F, 0x00, 0x00, 0x10, 0x42, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, 0x3D, 0x00, 0x00, 0x80, + 0x0F, 0x00, 0x00, 0x00, 0x02, // 187 + 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x80, 0xF9, 0xFF, 0x1F, 0x80, 0xF9, 0xFF, 0x0F, // 1112 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x1C, 0x3C, 0x00, 0x00, 0x7F, 0x70, 0x00, 0x00, 0x63, 0x60, 0x00, 0x80, + 0xE1, 0xE0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC1, 0x00, 0x80, 0x83, 0xE1, 0x00, 0x00, 0x87, 0x63, 0x00, 0x00, 0x0E, 0x3F, 0x00, 0x00, 0x0C, 0x1E, // 1029 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x30, 0x00, 0x00, 0xF0, 0x71, 0x00, 0x00, 0xB8, 0xE3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC7, 0x00, 0x00, 0x18, 0xC7, 0x00, 0x00, 0x38, 0xE6, 0x00, 0x00, 0x70, 0x7E, 0x00, 0x00, 0x60, + 0x3C, // 1109 + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, + 0x03, // 1111 + 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, + 0x3E, 0x06, 0x00, 0x80, 0x0F, 0x06, 0x00, 0x80, 0x01, 0x06, 0x00, 0x80, 0x0F, 0x06, 0x00, 0x00, 0x3E, 0x06, 0x00, 0x00, 0xF8, + 0x07, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, 0xC0, // 1040 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x81, 0x61, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1041 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x00, 0xE3, 0xC1, 0x00, 0x00, 0xFF, 0x61, 0x00, 0x00, 0x1E, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1042 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 1043 + 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0xDF, 0x00, 0x80, 0xFF, 0xC7, 0x00, 0x80, + 0x7F, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xC0, + 0x0F, // 1044 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, + 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0x01, 0xC0, // 1045 + 0x80, 0x01, 0x80, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x00, 0x07, 0x3C, 0x00, 0x00, 0x1E, 0x0E, 0x00, 0x00, + 0x38, 0x07, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x80, 0xFF, + 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xE0, 0x03, + 0x00, 0x00, 0x38, 0x07, 0x00, 0x00, 0x1E, 0x0E, 0x00, 0x00, 0x07, 0x3C, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x01, 0xC0, 0x00, + 0x80, 0x01, 0x80, // 1046 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x0C, 0x08, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x78, 0x00, 0x80, 0x03, 0x60, 0x00, 0x80, + 0x01, 0xE0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x00, 0xE3, + 0xE1, 0x00, 0x00, 0xBF, 0x73, 0x00, 0x00, 0x1C, 0x3F, 0x00, 0x00, 0x00, 0x1E, // 1047 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x70, 0x00, 0x00, + 0x00, 0x3C, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0xF0, 0x00, 0x00, 0x00, 0x38, + 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1048 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0x70, 0x00, 0x18, + 0x00, 0x3C, 0x00, 0x30, 0x00, 0x0E, 0x00, 0x20, 0x80, 0x07, 0x00, 0x20, 0xC0, 0x01, 0x00, 0x20, 0xF0, 0x00, 0x00, 0x30, 0x38, + 0x00, 0x00, 0x18, 0x1E, 0x00, 0x00, 0x00, 0x07, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1049 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x01, 0x00, 0x00, 0x60, 0x03, 0x00, 0x00, 0x78, 0x07, 0x00, 0x00, 0x1E, 0x0E, 0x00, 0x00, 0x07, + 0x38, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0x80, // 1050 + 0x00, 0x00, 0x40, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x80, 0xFF, 0x7F, 0x00, 0x80, 0xFF, 0x3F, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1051 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, + 0x3F, 0x00, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xFC, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xF8, 0x03, 0x00, 0x00, 0x3F, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x80, 0xFF, 0xFF, + 0x00, 0x80, 0xFF, 0xFF, // 1052 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1053 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x03, 0xE0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x1E, 0x3C, + 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF0, 0x07, // 1054 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1055 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, + 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x80, 0x81, + 0x01, 0x00, 0x80, 0x81, 0x01, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x00, 0x00, 0x3C, // 1056 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, + 0x03, 0x60, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, + 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x0E, 0x3C, 0x00, 0x00, 0x08, + 0x0C, // 1057 + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, + 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, // 1058 + 0x00, 0x00, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x00, 0x1E, 0xC0, 0x00, 0x00, 0x78, 0xC0, 0x00, 0x00, + 0xE0, 0xC1, 0x00, 0x00, 0x80, 0x77, 0x00, 0x00, 0x00, 0x3E, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x78, + 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0x80, 0x01, // 1059 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0x03, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, + 0x0E, 0x38, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x06, + 0x30, 0x00, 0x00, 0x06, 0x30, 0x00, 0x00, 0x0E, 0x38, 0x00, 0x00, 0x0C, 0x18, 0x00, 0x00, 0x1C, 0x1C, 0x00, 0x00, 0xF8, 0x0F, + 0x00, 0x00, 0xE0, 0x03, // 1060 + 0x00, 0x00, 0x80, 0x00, 0x80, 0x00, 0xC0, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x07, 0x78, 0x00, 0x00, 0x0F, 0x1E, 0x00, 0x00, + 0x3C, 0x0F, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0x1E, 0x0F, 0x00, 0x00, 0x0F, + 0x1C, 0x00, 0x80, 0x07, 0x78, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x80, 0x00, 0xC0, 0x00, 0x00, 0x00, 0x80, // 1061 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, + 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, + 0x1F, 0x00, 0x00, 0xC0, 0x1F, // 1062 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x80, 0xFF, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x80, + 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1063 + 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, + 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, + 0xFF, // 1064 + 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, + 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, + 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xC0, 0x1F, // 1065 + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0x80, + 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, + 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, 0x61, + 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1066 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, + 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, + 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1067 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, + 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0xC0, + 0xC0, 0x00, 0x00, 0xC0, 0xC0, 0x00, 0x00, 0x80, 0x61, 0x00, 0x00, 0x80, 0x7F, 0x00, 0x00, 0x00, 0x1E, // 1068 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x08, 0x08, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x0F, 0x78, 0x00, 0x00, 0x03, 0x60, 0x00, 0x80, + 0x03, 0xE0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, 0xC0, 0x00, 0x80, 0xC1, + 0xC0, 0x00, 0x00, 0xC3, 0x60, 0x00, 0x00, 0xC7, 0x70, 0x00, 0x00, 0xCE, 0x38, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF0, + 0x07, // 1069 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, + 0x80, 0x01, 0x00, 0x00, 0x80, 0x01, 0x00, 0x00, 0xF0, 0x07, 0x00, 0x00, 0xFC, 0x1F, 0x00, 0x00, 0x1E, 0x3C, 0x00, 0x00, 0x07, + 0x70, 0x00, 0x00, 0x03, 0x60, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, + 0x00, 0x80, 0x01, 0xC0, 0x00, 0x80, 0x01, 0xC0, 0x00, 0x00, 0x03, 0x60, 0x00, 0x00, 0x07, 0x70, 0x00, 0x00, 0x1E, 0x3C, 0x00, + 0x00, 0xFC, 0x1F, 0x00, 0x00, 0xF0, 0x07, // 1070 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x3E, 0xC0, 0x00, 0x00, 0x7F, 0xF0, 0x00, 0x80, 0x63, 0x7C, 0x00, 0x80, + 0xC1, 0x1E, 0x00, 0x80, 0xC1, 0x0F, 0x00, 0x80, 0xC1, 0x03, 0x00, 0x80, 0xC1, 0x01, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, + 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xC1, 0x00, 0x00, 0x80, 0xFF, 0xFF, 0x00, 0x80, 0xFF, 0xFF, // 1071 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x38, 0x00, 0x00, 0x70, 0x7C, 0x00, 0x00, 0x30, 0xE6, 0x00, 0x00, 0x18, 0xC6, 0x00, 0x00, + 0x18, 0xC6, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0x63, 0x00, 0x00, 0x38, 0x63, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x00, 0xE0, + 0xFF, 0x00, 0x00, 0x00, 0x80, // 1072 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xFE, 0x3F, 0x00, 0x00, 0x73, 0x70, 0x00, 0x00, 0x31, 0xE0, 0x00, 0x80, + 0x19, 0xC0, 0x00, 0x80, 0x19, 0xC0, 0x00, 0x80, 0x19, 0xC0, 0x00, 0x80, 0x19, 0xC0, 0x00, 0x80, 0x39, 0xE0, 0x00, 0x80, 0x71, + 0x70, 0x00, 0x80, 0xE1, 0x3F, 0x00, 0x80, 0x80, 0x0F, // 1073 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0xF0, 0xE7, 0x00, 0x00, 0xF0, + 0x7E, 0x00, 0x00, 0x00, 0x3C, // 1074 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, // 1075 + 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xFC, 0x00, 0x00, 0xF8, 0xDF, 0x00, 0x00, 0xF8, 0xC3, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0xC0, 0x0F, // 1076 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x73, 0x00, 0x00, 0x38, 0xE3, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x38, 0xE3, 0x00, 0x00, 0x70, 0x63, 0x00, 0x00, 0xE0, + 0x33, 0x00, 0x00, 0xC0, 0x13, // 1077 + 0x00, 0x18, 0xE0, 0x00, 0x00, 0x18, 0x70, 0x00, 0x00, 0xF8, 0x38, 0x00, 0x00, 0xE0, 0x0D, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, + 0x00, 0x02, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, + 0x0D, 0x00, 0x00, 0xF8, 0x38, 0x00, 0x00, 0x18, 0x70, 0x00, 0x00, 0x18, 0xE0, 0x00, 0x00, 0x00, 0x80, // 1078 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x30, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x38, 0xE7, 0x00, 0x00, 0xF0, 0x7F, 0x00, 0x00, 0xE0, 0x3C, // 1079 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xF0, 0x00, 0x00, + 0x00, 0x3C, 0x00, 0x00, 0x00, 0x0F, 0x00, 0x00, 0x80, 0x07, 0x00, 0x00, 0xE0, 0x01, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1080 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x80, 0x01, 0xF0, 0x00, 0x00, + 0x03, 0x3C, 0x00, 0x00, 0x02, 0x0F, 0x00, 0x00, 0x82, 0x07, 0x00, 0x00, 0xE2, 0x01, 0x00, 0x00, 0x7B, 0x00, 0x00, 0x80, 0xF9, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1081 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0x02, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0xC0, 0x0D, 0x00, 0x00, 0xF0, 0x38, 0x00, 0x00, 0x18, 0x70, 0x00, 0x00, 0x18, 0xE0, 0x00, 0x00, 0x00, + 0x80, // 1082 + 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1083 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, + 0xF0, 0x03, 0x00, 0x00, 0x80, 0x3F, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x00, 0xE0, 0x00, 0x00, 0x00, 0xFC, 0x00, 0x00, 0x80, + 0x1F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x78, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1084 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1085 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, + 0x3F, 0x00, 0x00, 0xC0, 0x1F, // 1086 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, + 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1087 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0x60, 0x30, 0x00, 0x00, + 0x30, 0x60, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, + 0x70, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xC0, 0x0F, // 1088 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x60, + 0x30, // 1089 + 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, + 0xF8, 0xFF, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, // 1090 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x38, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x18, 0x00, 0xC0, 0x07, 0x18, 0x00, 0x00, 0x3E, 0x1C, 0x00, + 0x00, 0xF8, 0x0F, 0x00, 0x00, 0xF0, 0x03, 0x00, 0x00, 0x7F, 0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0xF8, 0x00, 0x00, 0x00, + 0x18, // 1091 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, + 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x70, 0x60, 0x00, 0x80, 0xFF, 0xFF, 0x1F, 0x80, 0xFF, + 0xFF, 0x1F, 0x00, 0x70, 0x60, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xE0, + 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0xC0, 0x1F, // 1092 + 0x00, 0x08, 0x80, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x78, 0xF0, 0x00, 0x00, 0xE0, 0x38, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, + 0x00, 0x07, 0x00, 0x00, 0x80, 0x1F, 0x00, 0x00, 0xE0, 0x38, 0x00, 0x00, 0x70, 0xF0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x08, + 0x80, // 1093 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0x00, 0xC0, 0x1F, // 1094 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0x01, 0x00, 0x00, 0xF8, 0x07, 0x00, 0x00, 0x00, 0x0E, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, + 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x0C, 0x00, 0x00, 0x00, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, // 1095 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1096 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, + 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, 0x00, 0x00, 0x00, 0xC0, + 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x1F, 0x00, 0x00, 0xC0, 0x1F, // 1097 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0x18, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, + 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, + 0xC3, 0x00, 0x00, 0x00, 0xE7, 0x00, 0x00, 0x00, 0x7E, 0x00, 0x00, 0x00, 0x3C, // 1098 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, + 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xE7, 0x00, 0x00, 0x00, + 0x7E, 0x00, 0x00, 0x00, 0x3C, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, // 1099 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, + 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xC3, 0x00, 0x00, 0x00, 0xE7, 0x00, 0x00, 0x00, + 0x7E, 0x00, 0x00, 0x00, 0x3C, // 1100 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x60, 0x18, 0x00, 0x00, 0x70, 0x78, 0x00, 0x00, 0x38, 0x60, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, + 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x18, 0xC3, 0x00, 0x00, 0x70, 0x73, 0x00, 0x00, 0xE0, 0x7F, 0x00, 0x00, 0xC0, + 0x1F, // 1101 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, + 0x00, 0x03, 0x00, 0x00, 0xC0, 0x1F, 0x00, 0x00, 0xE0, 0x3F, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x18, + 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x18, 0xC0, 0x00, 0x00, 0x38, 0xE0, 0x00, 0x00, 0x70, 0x70, 0x00, 0x00, 0xE0, 0x3F, + 0x00, 0x00, 0xC0, 0x1F, // 1102 + 0x00, 0x00, 0x00, 0x00, 0x00, 0xE0, 0xC1, 0x00, 0x00, 0xF0, 0xE3, 0x00, 0x00, 0x38, 0x7B, 0x00, 0x00, 0x18, 0x1A, 0x00, 0x00, + 0x18, 0x0E, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0x18, 0x06, 0x00, 0x00, 0xF8, 0xFF, 0x00, 0x00, 0xF8, + 0xFF, // 1103 }; \ No newline at end of file diff --git a/src/graphics/fonts/OLEDDisplayFontsUA.h b/src/graphics/fonts/OLEDDisplayFontsUA.h index 3bd9bb4ca..dc313aed2 100644 --- a/src/graphics/fonts/OLEDDisplayFontsUA.h +++ b/src/graphics/fonts/OLEDDisplayFontsUA.h @@ -8,4 +8,6 @@ #endif extern const uint8_t ArialMT_Plain_10_UA[] PROGMEM; +extern const uint8_t ArialMT_Plain_16_UA[] PROGMEM; +extern const uint8_t ArialMT_Plain_24_UA[] PROGMEM; #endif \ No newline at end of file diff --git a/src/graphics/images.h b/src/graphics/images.h index 2b0854a33..b757dcf30 100644 --- a/src/graphics/images.h +++ b/src/graphics/images.h @@ -14,7 +14,7 @@ const uint8_t imgUser[] PROGMEM = {0x3C, 0x42, 0x99, 0xA5, 0xA5, 0x99, 0x42, 0x3 const uint8_t imgPositionEmpty[] PROGMEM = {0x20, 0x30, 0x28, 0x24, 0x42, 0xFF}; const uint8_t imgPositionSolid[] PROGMEM = {0x20, 0x30, 0x38, 0x3C, 0x7E, 0xFF}; -#ifdef T_WATCH_S3 +#if defined(DISPLAY_CLOCK_FRAME) const uint8_t bluetoothConnectedIcon[36] PROGMEM = {0xfe, 0x01, 0xff, 0x03, 0x03, 0x03, 0x03, 0x03, 0x03, 0x00, 0xe3, 0x1f, 0xf3, 0x3f, 0x33, 0x30, 0x33, 0x33, 0x33, 0x33, 0x03, 0x33, 0xff, 0x33, 0xfe, 0x31, 0x00, 0x30, 0x30, 0x30, 0x30, 0x30, 0xf0, 0x3f, 0xe0, 0x1f}; @@ -56,6 +56,16 @@ static unsigned char thumbdown[] PROGMEM = { 0x80, 0x09, 0x00, 0x00, 0x00, 0x11, 0x00, 0x00, 0x00, 0x12, 0x00, 0x00, 0x00, 0x24, 0x00, 0x00, 0x00, 0x1C, 0x00, 0x00, }; +#define smiley_height 30 +#define smiley_width 30 +static unsigned char smiley[] PROGMEM = { + 0x00, 0xfe, 0x0f, 0x00, 0x80, 0x01, 0x30, 0x00, 0x40, 0x00, 0xc0, 0x00, 0x20, 0x00, 0x00, 0x01, 0x10, 0x00, 0x00, 0x02, + 0x08, 0x00, 0x00, 0x04, 0x04, 0x00, 0x00, 0x08, 0x04, 0x00, 0x00, 0x10, 0x02, 0x0e, 0x0e, 0x10, 0x02, 0x09, 0x12, 0x10, + 0x01, 0x09, 0x12, 0x20, 0x01, 0x0f, 0x1e, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, + 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x01, 0x00, 0x00, 0x20, 0x81, 0x00, 0x20, 0x20, + 0x82, 0x00, 0x20, 0x10, 0x02, 0x01, 0x10, 0x10, 0x04, 0x02, 0x08, 0x08, 0x04, 0xfc, 0x07, 0x08, 0x08, 0x00, 0x00, 0x04, + 0x10, 0x00, 0x00, 0x02, 0x20, 0x00, 0x00, 0x01, 0x40, 0x00, 0xc0, 0x00, 0x80, 0x01, 0x30, 0x00, 0x00, 0xfe, 0x0f, 0x00}; + #define question_height 25 #define question_width 25 static unsigned char question[] PROGMEM = { diff --git a/src/input/MPR121Keyboard.cpp b/src/input/MPR121Keyboard.cpp new file mode 100644 index 000000000..9bca6801d --- /dev/null +++ b/src/input/MPR121Keyboard.cpp @@ -0,0 +1,433 @@ +// Based on the BBQ10 Keyboard + +#include "MPR121Keyboard.h" +#include "configuration.h" +#include + +#define _MPR121_REG_KEY 0x5a + +#define _MPR121_REG_TOUCH_STATUS 0x00 +#define _MPR121_REG_ELECTRODE_FILTERED_DATA +#define _MPR121_REG_BASELINE_VALUE 0x1E + +// Baseline filters +#define _MPR121_REG_MAX_HALF_DELTA_RISING 0x2B +#define _MPR121_REG_NOISE_HALF_DELTA_RISING 0x2C +#define _MPR121_REG_NOISE_COUNT_LIMIT_RISING 0x2D +#define _MPR121_REG_FILTER_DELAY_COUNT_RISING 0x2E +#define _MPR121_REG_MAX_HALF_DELTA_FALLING 0x2F +#define _MPR121_REG_NOISE_HALF_DELTA_FALLING 0x30 +#define _MPR121_REG_NOISE_COUNT_LIMIT_FALLING 0x31 +#define _MPR121_REG_FILTER_DELAY_COUNT_FALLING 0x32 +#define _MPR121_REG_NOISE_HALF_DELTA_TOUCHED 0x33 +#define _MPR121_REG_NOISE_COUNT_LIMIT_TOUCHED 0x34 +#define _MPR121_REG_FILTER_DELAY_COUNT_TOUCHED 0x35 + +#define _MPR121_REG_TOUCH_THRESHOLD 0x41 // First input, +2 for subsequent +#define _MPR121_REG_RELEASE_THRESHOLD 0x42 // First input, +2 for subsequent +#define _MPR121_REG_DEBOUNCE 0x5B +#define _MPR121_REG_CONFIG1 0x5C +#define _MPR121_REG_CONFIG2 0x5D +#define _MPR121_REG_ELECTRODE_CONFIG 0x5E +#define _MPR121_REG_AUTOCONF_CTRL0 0x7B +#define _MPR121_REG_AUTOCONF_CTRL1 0x7C +#define _MPR121_REG_SOFT_RESET 0x80 + +#define _KEY_MASK 0x0FFF // Key mask for the first 12 bits +#define _NUM_KEYS 12 + +#define ECR_CALIBRATION_TRACK_FROM_ZERO (0 << 6) +#define ECR_CALIBRATION_LOCK (1 << 6) +#define ECR_CALIBRATION_TRACK_FROM_PARTIAL_FILTER (2 << 6) // Recommended Typical Mode +#define ECR_CALIBRATION_TRACK_FROM_FULL_FILTER (3 << 6) +#define ECR_PROXIMITY_DETECTION_OFF (0 << 0) // Not using proximity detection +#define ECR_TOUCH_DETECTION_12CH (12 << 0) // Using all 12 channels + +#define MPR121_NONE 0x00 +#define MPR121_REBOOT 0x90 +#define MPR121_LEFT 0xb4 +#define MPR121_UP 0xb5 +#define MPR121_DOWN 0xb6 +#define MPR121_RIGHT 0xb7 +#define MPR121_ESC 0x1b +#define MPR121_BSP 0x08 +#define MPR121_SELECT 0x0d + +#define MPR121_FN_ON 0xf1 +#define MPR121_FN_OFF 0xf2 + +#define LONG_PRESS_THRESHOLD 2000 +#define MULTI_TAP_THRESHOLD 2000 + +uint8_t TapMod[12] = {1, 2, 1, 13, 7, 7, 7, 7, 7, 9, 7, 9}; // Num chars per key, Modulus for rotating through characters + +unsigned char MPR121_TapMap[12][13] = {{MPR121_BSP}, + {'0', ' '}, + {MPR121_SELECT}, + {'1', '.', ',', '?', '!', ':', ';', '-', '_', '\\', '/', '(', ')'}, + {'2', 'a', 'b', 'c', 'A', 'B', 'C'}, + {'3', 'd', 'e', 'f', 'D', 'E', 'F'}, + {'4', 'g', 'h', 'i', 'G', 'H', 'I'}, + {'5', 'j', 'k', 'l', 'J', 'K', 'L'}, + {'6', 'm', 'n', 'o', 'M', 'N', 'O'}, + {'7', 'p', 'q', 'r', 's', 'P', 'Q', 'R', 'S'}, + {'8', 't', 'u', 'v', 'T', 'U', 'V'}, + {'9', 'w', 'x', 'y', 'z', 'W', 'X', 'Y', 'Z'}}; + +unsigned char MPR121_LongPressMap[12] = {MPR121_ESC, ' ', MPR121_NONE, MPR121_NONE, MPR121_UP, MPR121_NONE, + MPR121_LEFT, MPR121_NONE, MPR121_RIGHT, MPR121_NONE, MPR121_DOWN, MPR121_NONE}; + +// Translation map from left to right, top to bottom layout to a more convenient layout to manufacture, matching the +// https://www.amazon.com.au/Capacitive-Sensitive-Sensitivity-Replacement-Traditional/dp/B0CTJD5KW9/ref=pd_ci_mcx_mh_mcx_views_0_title?th=1 +/*uint8_t MPR121_KeyMap[12] = { + 9, 6, 3, 0, + 10, 7, 4, 1, + 11, 8, 5, 2 +};*/ +// Rotated Layout +uint8_t MPR121_KeyMap[12] = {2, 5, 8, 11, 1, 4, 7, 10, 0, 3, 6, 9}; + +MPR121Keyboard::MPR121Keyboard() : m_wire(nullptr), m_addr(0), readCallback(nullptr), writeCallback(nullptr) +{ + // LOG_DEBUG("MPR121 @ %02x", m_addr); + state = Init; + last_key = -1; + last_tap = 0L; + char_idx = 0; + queue = ""; +} + +void MPR121Keyboard::begin(uint8_t addr, TwoWire *wire) +{ + m_addr = addr; + m_wire = wire; + + m_wire->begin(); + + reset(); +} + +void MPR121Keyboard::begin(i2c_com_fptr_t r, i2c_com_fptr_t w, uint8_t addr) +{ + m_addr = addr; + m_wire = nullptr; + writeCallback = w; + readCallback = r; + reset(); +} + +void MPR121Keyboard::reset() +{ + LOG_DEBUG("MPR121 Reset"); + // Trigger a MPR121 Soft Reset + if (m_wire) { + m_wire->beginTransmission(m_addr); + m_wire->write(_MPR121_REG_SOFT_RESET); + m_wire->endTransmission(); + } + if (writeCallback) { + uint8_t data = 0; + writeCallback(m_addr, _MPR121_REG_SOFT_RESET, &data, 0); + } + delay(100); + // Reset Electrode Configuration to 0x00, Stop Mode + writeRegister(_MPR121_REG_ELECTRODE_CONFIG, 0x00); + delay(100); + + LOG_DEBUG("MPR121 Configuring"); + // Set touch release thresholds + for (uint8_t i = 0; i < 12; i++) { + // Set touch threshold + writeRegister(_MPR121_REG_TOUCH_THRESHOLD + (i * 2), 10); + delay(20); + // Set release threshold + writeRegister(_MPR121_REG_RELEASE_THRESHOLD + (i * 2), 5); + delay(20); + } + // Configure filtering and baseline registers + writeRegister(_MPR121_REG_MAX_HALF_DELTA_RISING, 0x05); + delay(20); + writeRegister(_MPR121_REG_MAX_HALF_DELTA_FALLING, 0x01); + delay(20); + writeRegister(_MPR121_REG_NOISE_HALF_DELTA_RISING, 0x01); + delay(20); + writeRegister(_MPR121_REG_NOISE_HALF_DELTA_FALLING, 0x05); + delay(20); + writeRegister(_MPR121_REG_NOISE_HALF_DELTA_TOUCHED, 0x00); + delay(20); + writeRegister(_MPR121_REG_NOISE_COUNT_LIMIT_RISING, 0x05); + delay(20); + writeRegister(_MPR121_REG_NOISE_COUNT_LIMIT_FALLING, 0x01); + delay(20); + writeRegister(_MPR121_REG_NOISE_COUNT_LIMIT_TOUCHED, 0x00); + delay(20); + writeRegister(_MPR121_REG_FILTER_DELAY_COUNT_RISING, 0x00); + delay(20); + writeRegister(_MPR121_REG_FILTER_DELAY_COUNT_FALLING, 0x00); + delay(20); + writeRegister(_MPR121_REG_FILTER_DELAY_COUNT_TOUCHED, 0x00); + delay(20); + writeRegister(_MPR121_REG_AUTOCONF_CTRL0, 0x04); // Auto-config enable + delay(20); + writeRegister(_MPR121_REG_AUTOCONF_CTRL1, 0x00); // Ensure no auto-config interrupt + delay(20); + writeRegister(_MPR121_REG_DEBOUNCE, 0x02); + delay(20); + writeRegister(_MPR121_REG_CONFIG1, 0x20); + delay(20); + writeRegister(_MPR121_REG_CONFIG2, 0x21); + delay(20); + // Enter run mode by Seting partial filter calibration tracking, disable proximity detection, enable 12 channels + writeRegister(_MPR121_REG_ELECTRODE_CONFIG, + ECR_CALIBRATION_TRACK_FROM_FULL_FILTER | ECR_PROXIMITY_DETECTION_OFF | ECR_TOUCH_DETECTION_12CH); + delay(100); + LOG_DEBUG("MPR121 Run"); + state = Idle; +} + +void MPR121Keyboard::attachInterrupt(uint8_t pin, void (*func)(void)) const +{ + pinMode(pin, INPUT_PULLUP); + ::attachInterrupt(digitalPinToInterrupt(pin), func, RISING); +} + +void MPR121Keyboard::detachInterrupt(uint8_t pin) const +{ + ::detachInterrupt(pin); +} + +uint8_t MPR121Keyboard::status() const +{ + return readRegister16(_MPR121_REG_KEY); +} + +uint8_t MPR121Keyboard::keyCount() const +{ + // Read the key register + uint16_t keyRegister = readRegister16(_MPR121_REG_KEY); + return keyCount(keyRegister); +} + +uint8_t MPR121Keyboard::keyCount(uint16_t value) const +{ + // Mask the first 12 bits + uint16_t buttonState = value & _KEY_MASK; + + // Count how many bits are set to 1 (i.e., how many buttons are pressed) + uint8_t numButtonsPressed = 0; + for (uint8_t i = 0; i < 12; ++i) { + if (buttonState & (1 << i)) { + numButtonsPressed++; + } + } + + return numButtonsPressed; +} + +bool MPR121Keyboard::hasEvent() +{ + return queue.length() > 0; +} + +void MPR121Keyboard::queueEvent(char next) +{ + if (next == MPR121_NONE) { + return; + } + queue.concat(next); +} + +char MPR121Keyboard::dequeueEvent() +{ + if (queue.length() < 1) { + return MPR121_NONE; + } + char next = queue.charAt(0); + queue.remove(0, 1); + return next; +} + +void MPR121Keyboard::trigger() +{ + // Intended to fire in response to an interrupt from the MPR121 or a longpress callback + // Only functional if not in Init state + if (state != Init) { + // Read the key register + uint16_t keyRegister = readRegister16(_MPR121_REG_KEY); + uint8_t keysPressed = keyCount(keyRegister); + if (keysPressed == 0) { + // No buttons pressed + if (state == Held) + released(); + state = Idle; + return; + } + if (keysPressed == 1) { + // No buttons pressed + if (state == Held || state == HeldLong) + held(keyRegister); + if (state == Idle) + pressed(keyRegister); + return; + } + if (keysPressed > 1) { + // Multipress + state = Busy; + return; + } + } else { + reset(); + } +} + +void MPR121Keyboard::pressed(uint16_t keyRegister) +{ + if (state == Init || state == Busy) { + return; + } + if (keyCount(keyRegister) != 1) { + LOG_DEBUG("Multipress"); + return; + } else { + LOG_DEBUG("Pressed"); + } + uint16_t buttonState = keyRegister & _KEY_MASK; + uint8_t next_pin = 0; + for (uint8_t i = 0; i < 12; ++i) { + if (buttonState & (1 << i)) { + next_pin = i; + } + } + uint8_t next_key = MPR121_KeyMap[next_pin]; + LOG_DEBUG("MPR121 Pin: %i Key: %i", next_pin, next_key); + uint32_t now = millis(); + int32_t tap_interval = now - last_tap; + if (tap_interval < 0) { + // long running, millis has overflowed. + last_tap = 0; + state = Busy; + return; + } + if (next_key != last_key || tap_interval > MULTI_TAP_THRESHOLD) { + char_idx = 0; + } else { + char_idx += 1; + } + last_key = next_key; + last_tap = now; + state = Held; + return; +} + +void MPR121Keyboard::held(uint16_t keyRegister) +{ + if (state == Init || state == Busy) { + return; + } + if (keyCount(keyRegister) != 1) { + return; + } + LOG_DEBUG("Held"); + uint16_t buttonState = keyRegister & _KEY_MASK; + uint8_t next_key = 0; + for (uint8_t i = 0; i < 12; ++i) { + if (buttonState & (1 << i)) { + next_key = MPR121_KeyMap[i]; + } + } + uint32_t now = millis(); + int32_t held_interval = now - last_tap; + if (held_interval < 0 || next_key != last_key) { + // long running, millis has overflowed, or a key has been switched quickly... + last_tap = 0; + state = Busy; + return; + } + if (held_interval > LONG_PRESS_THRESHOLD) { + // Set state to heldlong, send a longpress, and reset the timer... + state = HeldLong; // heldlong will allow this function to still fire, but prevent a "release" + queueEvent(MPR121_LongPressMap[last_key]); + last_tap = now; + LOG_DEBUG("Long Press Key: %i Map: %i", last_key, MPR121_LongPressMap[last_key]); + } + return; +} + +void MPR121Keyboard::released() +{ + if (state != Held) { + return; + } + // would clear longpress callback... later. + if (last_key < 0 || last_key > _NUM_KEYS) { // reset to idle if last_key out of bounds + last_key = -1; + state = Idle; + return; + } + LOG_DEBUG("Released"); + if (char_idx > 0 && TapMod[last_key] > 1) { + queueEvent(MPR121_BSP); + LOG_DEBUG("Multi Press, Backspace"); + } + queueEvent(MPR121_TapMap[last_key][(char_idx % TapMod[last_key])]); + LOG_DEBUG("Key Press: %i Index:%i if %i Map: %i", last_key, char_idx, TapMod[last_key], + MPR121_TapMap[last_key][(char_idx % TapMod[last_key])]); +} + +uint8_t MPR121Keyboard::readRegister8(uint8_t reg) const +{ + if (m_wire) { + m_wire->beginTransmission(m_addr); + m_wire->write(reg); + m_wire->endTransmission(); + + m_wire->requestFrom(m_addr, (uint8_t)1); + if (m_wire->available() < 1) + return 0; + + return m_wire->read(); + } + if (readCallback) { + uint8_t data; + readCallback(m_addr, reg, &data, 1); + return data; + } + return 0; +} + +uint16_t MPR121Keyboard::readRegister16(uint8_t reg) const +{ + uint8_t data[2] = {0}; + // uint8_t low = 0, high = 0; + if (m_wire) { + m_wire->beginTransmission(m_addr); + m_wire->write(reg); + m_wire->endTransmission(); + + m_wire->requestFrom(m_addr, (uint8_t)2); + if (m_wire->available() < 2) + return 0; + data[0] = m_wire->read(); + data[1] = m_wire->read(); + } + if (readCallback) { + readCallback(m_addr, reg, data, 2); + } + return (data[1] << 8) | data[0]; +} + +void MPR121Keyboard::writeRegister(uint8_t reg, uint8_t value) +{ + uint8_t data[2]; + data[0] = reg; + data[1] = value; + + if (m_wire) { + m_wire->beginTransmission(m_addr); + m_wire->write(data, sizeof(uint8_t) * 2); + m_wire->endTransmission(); + } + if (writeCallback) { + writeCallback(m_addr, data[0], &(data[1]), 1); + } +} \ No newline at end of file diff --git a/src/input/MPR121Keyboard.h b/src/input/MPR121Keyboard.h new file mode 100644 index 000000000..6349750ce --- /dev/null +++ b/src/input/MPR121Keyboard.h @@ -0,0 +1,56 @@ +// Based on the BBQ10 Keyboard + +#include "concurrency/NotifiedWorkerThread.h" +#include "configuration.h" +#include +#include + +class MPR121Keyboard +{ + public: + typedef uint8_t (*i2c_com_fptr_t)(uint8_t dev_addr, uint8_t reg_addr, uint8_t *data, uint8_t len); + + enum MPR121States { Init = 0, Idle, Held, HeldLong, Busy }; + + MPR121States state; + + int8_t last_key; + uint32_t last_tap; + uint8_t char_idx; + + String queue; + + MPR121Keyboard(); + + void begin(uint8_t addr = MPR121_KB_ADDR, TwoWire *wire = &Wire); + + void begin(i2c_com_fptr_t r, i2c_com_fptr_t w, uint8_t addr = MPR121_KB_ADDR); + + void reset(void); + + void attachInterrupt(uint8_t pin, void (*func)(void)) const; + void detachInterrupt(uint8_t pin) const; + + void trigger(void); + void pressed(uint16_t value); + void held(uint16_t value); + void released(void); + + uint8_t status(void) const; + uint8_t keyCount(void) const; + uint8_t keyCount(uint16_t value) const; + + bool hasEvent(void); + char dequeueEvent(void); + void queueEvent(char); + + uint8_t readRegister8(uint8_t reg) const; + uint16_t readRegister16(uint8_t reg) const; + void writeRegister(uint8_t reg, uint8_t value); + + private: + TwoWire *m_wire; + uint8_t m_addr; + i2c_com_fptr_t readCallback; + i2c_com_fptr_t writeCallback; +}; \ No newline at end of file diff --git a/src/input/ScanAndSelect.cpp b/src/input/ScanAndSelect.cpp index e1b39edf5..d8767fab8 100644 --- a/src/input/ScanAndSelect.cpp +++ b/src/input/ScanAndSelect.cpp @@ -59,7 +59,7 @@ int32_t ScanAndSelectInput::runOnce() // If: "no messages added" alert screen currently shown if (alertingNoMessage) { // Dismiss the alert screen several seconds after it appears - if (now > alertingSinceMs + durationAlertMs) { + if (!Throttle::isWithinTimespanMs(alertingSinceMs, durationAlertMs)) { alertingNoMessage = false; screen->endAlert(); } @@ -74,9 +74,9 @@ int32_t ScanAndSelectInput::runOnce() // Existing press else { - // Duration enough for long press + // Longer than shortpress window // Long press not yet fired (prevent repeat firing while held) - if (!longPressFired && Throttle::isWithinTimespanMs(downSinceMs, durationLongMs)) { + if (!longPressFired && !Throttle::isWithinTimespanMs(downSinceMs, durationLongMs)) { longPressFired = true; longPress(); } @@ -91,7 +91,9 @@ int32_t ScanAndSelectInput::runOnce() // Button newly released // Long press event didn't already fire if (held && !longPressFired) { - // Duration enough for short press + // Duration within shortpress window + // - longer than durationShortPress (debounce) + // - shorter than durationLongPress if (!Throttle::isWithinTimespanMs(downSinceMs, durationShortMs)) { shortPress(); } diff --git a/src/input/TouchScreenBase.cpp b/src/input/TouchScreenBase.cpp index 03618b338..d2f7b54f8 100644 --- a/src/input/TouchScreenBase.cpp +++ b/src/input/TouchScreenBase.cpp @@ -1,6 +1,10 @@ #include "TouchScreenBase.h" #include "main.h" +#if defined(RAK14014) && !defined(MESHTASTIC_EXCLUDE_CANNEDMESSAGES) +#include "modules/CannedMessageModule.h" +#endif + #ifndef TIME_LONG_PRESS #define TIME_LONG_PRESS 400 #endif @@ -102,12 +106,30 @@ int32_t TouchScreenBase::runOnce() } _touchedOld = touched; +#if defined RAK14014 + // Speed up the processing speed of the keyboard in virtual keyboard mode + auto state = cannedMessageModule->getRunState(); + if (state == CANNED_MESSAGE_RUN_STATE_FREETEXT) { + if (_tapped) { + _tapped = false; + e.touchEvent = static_cast(TOUCH_ACTION_TAP); + LOG_DEBUG("action TAP(%d/%d)", _last_x, _last_y); + } + } else { + if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) { + _tapped = false; + e.touchEvent = static_cast(TOUCH_ACTION_TAP); + LOG_DEBUG("action TAP(%d/%d)", _last_x, _last_y); + } + } +#else // fire TAP event when no 2nd tap occured within time if (_tapped && (time_t(millis()) - _start) > TIME_LONG_PRESS - 50) { _tapped = false; e.touchEvent = static_cast(TOUCH_ACTION_TAP); LOG_DEBUG("action TAP(%d/%d)", _last_x, _last_y); } +#endif // fire LONG_PRESS event without the need for release if (touched && (time_t(millis()) - _start) > TIME_LONG_PRESS) { @@ -134,4 +156,4 @@ void TouchScreenBase::hapticFeedback() drv.setWaveform(1, 0); // end waveform drv.go(); #endif -} \ No newline at end of file +} diff --git a/src/input/cardKbI2cImpl.cpp b/src/input/cardKbI2cImpl.cpp index 59ae16866..eb9b07d6e 100644 --- a/src/input/cardKbI2cImpl.cpp +++ b/src/input/cardKbI2cImpl.cpp @@ -9,11 +9,11 @@ CardKbI2cImpl::CardKbI2cImpl() : KbI2cBase("cardKB") {} void CardKbI2cImpl::init() { -#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) +#if !MESHTASTIC_EXCLUDE_I2C && !defined(ARCH_PORTDUINO) && !defined(I2C_NO_RESCAN) if (cardkb_found.address == 0x00) { - LOG_DEBUG("Rescanning for I2C keyboard"); - uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR}; - uint8_t i2caddr_asize = 3; + LOG_DEBUG("Rescan for I2C keyboard"); + uint8_t i2caddr_scan[] = {CARDKB_ADDR, TDECK_KB_ADDR, BBQ10_KB_ADDR, MPR121_KB_ADDR}; + uint8_t i2caddr_asize = 4; auto i2cScanner = std::unique_ptr(new ScanI2CTwoWire()); #if WIRE_INTERFACES_COUNT == 2 @@ -39,6 +39,10 @@ void CardKbI2cImpl::init() // assign an arbitrary value to distinguish from other models kb_model = 0x11; break; + case ScanI2C::DeviceType::MPR121KB: + // assign an arbitrary value to distinguish from other models + kb_model = 0x37; + break; default: // use this as default since it's also just zero LOG_WARN("kb_info.type is unknown(0x%02x), setting kb_model=0x00", kb_info.type); @@ -48,6 +52,8 @@ void CardKbI2cImpl::init() if (cardkb_found.address == 0x00) { disable(); return; + } else { + LOG_DEBUG("Keyboard Type: 0x%02x Model: 0x%02x Address: 0x%02x", kb_info.type, kb_model, cardkb_found.address); } } #else diff --git a/src/input/kbI2cBase.cpp b/src/input/kbI2cBase.cpp index 30188bb92..9b1a27745 100644 --- a/src/input/kbI2cBase.cpp +++ b/src/input/kbI2cBase.cpp @@ -34,21 +34,27 @@ int32_t KbI2cBase::runOnce() switch (cardkb_found.port) { case ScanI2C::WIRE1: #if WIRE_INTERFACES_COUNT == 2 - LOG_DEBUG("Using I2C Bus 1 (the second one)"); + LOG_DEBUG("Use I2C Bus 1 (the second one)"); i2cBus = &Wire1; if (cardkb_found.address == BBQ10_KB_ADDR) { Q10keyboard.begin(BBQ10_KB_ADDR, &Wire1); Q10keyboard.setBacklight(0); } + if (cardkb_found.address == MPR121_KB_ADDR) { + MPRkeyboard.begin(MPR121_KB_ADDR, &Wire1); + } break; #endif case ScanI2C::WIRE: - LOG_DEBUG("Using I2C Bus 0 (the first one)"); + LOG_DEBUG("Use I2C Bus 0 (the first one)"); i2cBus = &Wire; if (cardkb_found.address == BBQ10_KB_ADDR) { Q10keyboard.begin(BBQ10_KB_ADDR, &Wire); Q10keyboard.setBacklight(0); } + if (cardkb_found.address == MPR121_KB_ADDR) { + MPRkeyboard.begin(MPR121_KB_ADDR, &Wire); + } break; case ScanI2C::NO_I2C: default: @@ -157,6 +163,69 @@ int32_t KbI2cBase::runOnce() } break; } + case 0x37: { // MPR121 + MPRkeyboard.trigger(); + InputEvent e; + + while (MPRkeyboard.hasEvent()) { + char nextEvent = MPRkeyboard.dequeueEvent(); + e.inputEvent = ANYKEY; + e.kbchar = 0x00; + e.source = this->_originName; + switch (nextEvent) { + case 0x00: // MPR121_NONE + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE; + e.kbchar = 0x00; + break; + case 0x90: // MPR121_REBOOT + e.inputEvent = ANYKEY; + e.kbchar = INPUT_BROKER_MSG_REBOOT; + break; + case 0xb4: // MPR121_LEFT + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT; + e.kbchar = 0x00; + break; + case 0xb5: // MPR121_UP + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_UP; + e.kbchar = 0x00; + break; + case 0xb6: // MPR121_DOWN + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_DOWN; + e.kbchar = 0x00; + break; + case 0xb7: // MPR121_RIGHT + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT; + e.kbchar = 0x00; + break; + case 0x1b: // MPR121_ESC + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_CANCEL; + e.kbchar = 0x1b; + break; + case 0x08: // MPR121_BSP + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_BACK; + e.kbchar = 0x08; + break; + case 0x0d: // MPR121_SELECT + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT; + e.kbchar = 0x0d; + break; + default: + if (nextEvent > 127) { + e.inputEvent = meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE; + e.kbchar = 0x00; + break; + } + e.inputEvent = ANYKEY; + e.kbchar = nextEvent; + break; + } + if (e.inputEvent != meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_NONE) { + LOG_DEBUG("MP121 Notifying: %i Char: %i", e.inputEvent, e.kbchar); + this->notifyObservers(&e); + } + } + break; + } case 0x02: { // RAK14004 uint8_t rDataBuf[8] = {0}; diff --git a/src/input/kbI2cBase.h b/src/input/kbI2cBase.h index 35b9b0901..dc2414fc0 100644 --- a/src/input/kbI2cBase.h +++ b/src/input/kbI2cBase.h @@ -2,6 +2,7 @@ #include "BBQ10Keyboard.h" #include "InputBroker.h" +#include "MPR121Keyboard.h" #include "Wire.h" #include "concurrency/OSThread.h" @@ -19,5 +20,6 @@ class KbI2cBase : public Observable, public concurrency::OST TwoWire *i2cBus = 0; BBQ10Keyboard Q10keyboard; + MPR121Keyboard MPRkeyboard; bool is_sym = false; -}; +}; \ No newline at end of file diff --git a/src/main.cpp b/src/main.cpp index 7e05dee4b..7db4012bd 100644 --- a/src/main.cpp +++ b/src/main.cpp @@ -1,4 +1,3 @@ -#include "../userPrefs.h" #include "configuration.h" #if !MESHTASTIC_EXCLUDE_GPS #include "GPS.h" @@ -27,7 +26,6 @@ #include "detect/ScanI2CTwoWire.h" #include #endif -#include "detect/axpDebug.h" #include "detect/einkScan.h" #include "graphics/RAKled.h" #include "graphics/Screen.h" @@ -42,6 +40,7 @@ #include #ifdef ARCH_ESP32 +#include "freertosinc.h" #if !MESHTASTIC_EXCLUDE_WEBSERVER #include "mesh/http/WebServer.h" #endif @@ -84,7 +83,7 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr; #include "STM32WLE5JCInterface.h" #endif -#if !HAS_RADIO && defined(ARCH_PORTDUINO) +#if defined(ARCH_PORTDUINO) #include "platform/portduino/SimRadio.h" #endif @@ -92,6 +91,7 @@ NRF52Bluetooth *nrf52Bluetooth = nullptr; #include "linux/LinuxHardwareI2C.h" #include "mesh/raspihttp/PiWebServer.h" #include "platform/portduino/PortduinoGlue.h" +#include "platform/portduino/USBHal.h" #include #include #include @@ -151,10 +151,6 @@ ScanI2C::DeviceAddress accelerometer_found = ScanI2C::ADDRESS_NONE; // The I2C address of the RGB LED (if found) ScanI2C::FoundDevice rgb_found = ScanI2C::FoundDevice(ScanI2C::DeviceType::NONE, ScanI2C::ADDRESS_NONE); -#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) -ATECCX08A atecc; -#endif - #ifdef T_WATCH_S3 Adafruit_DRV2605 drv; #endif @@ -178,6 +174,8 @@ std::pair nodeTelemetrySensorsMap[_meshtastic_TelemetrySenso Router *router = NULL; // Users of router don't care what sort of subclass implements that API +const char *firmware_version = optstr(APP_VERSION_SHORT); + const char *getDeviceName() { uint8_t dmac[6]; @@ -219,6 +217,9 @@ static OSThread *powerFSMthread; static OSThread *ambientLightingThread; RadioInterface *rIf = NULL; +#ifdef ARCH_PORTDUINO +RadioLibHal *RadioLibHAL = NULL; +#endif /** * Some platforms (nrf52) might provide an alterate version that suppresses calling delay from sleep. @@ -243,6 +244,17 @@ void printInfo() #ifndef PIO_UNIT_TESTING void setup() { +#if defined(T_DECK) + // GPIO10 manages all peripheral power supplies + // Turn on peripheral power immediately after MUC starts. + // If some boards are turned on late, ESP32 will reset due to low voltage. + // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) , + // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder) + pinMode(KB_POWERON, OUTPUT); + digitalWrite(KB_POWERON, HIGH); + delay(100); +#endif + concurrency::hasBeenSetup = true; #if ARCH_PORTDUINO SPISettings spiSettings(settingsMap[spiSpeed], MSBFIRST, SPI_MODE0); @@ -267,14 +279,19 @@ void setup() #ifdef DEBUG_PORT consoleInit(); // Set serial baud rate and init our mesh console #endif + +#ifdef UNPHONE + unphone.printStore(); +#endif + #if ARCH_PORTDUINO struct timeval tv; tv.tv_sec = time(NULL); tv.tv_usec = 0; perhapsSetRTC(RTCQualityNTP, &tv); #endif - powerMonInit(); + powerMonInit(); serialSinceMsec = millis(); LOG_INFO("\n\n//\\ E S H T /\\ S T / C\n"); @@ -324,7 +341,7 @@ void setup() #ifdef PERIPHERAL_WARMUP_MS // Some peripherals may require additional time to stabilize after power is connected // e.g. I2C on Heltec Vision Master - LOG_INFO("Waiting for peripherals to stabilize"); + LOG_INFO("Wait for peripherals to stabilize"); delay(PERIPHERAL_WARMUP_MS); #endif @@ -385,10 +402,10 @@ void setup() Wire.begin(I2C_SDA, I2C_SCL); #elif defined(ARCH_PORTDUINO) if (settingsStrings[i2cdev] != "") { - LOG_INFO("Using %s as I2C device.", settingsStrings[i2cdev].c_str()); + LOG_INFO("Use %s as I2C device", settingsStrings[i2cdev].c_str()); Wire.begin(settingsStrings[i2cdev].c_str()); } else { - LOG_INFO("No I2C device configured, skipping."); + LOG_INFO("No I2C device configured, Skip"); } #elif HAS_WIRE Wire.begin(); @@ -410,15 +427,6 @@ void setup() digitalWrite(AQ_SET_PIN, HIGH); #endif -#ifdef T_DECK - // enable keyboard - pinMode(KB_POWERON, OUTPUT); - digitalWrite(KB_POWERON, HIGH); - // There needs to be a delay after power on, give LILYGO-KEYBOARD some startup time - // otherwise keyboard and touch screen will not work - delay(800); -#endif - // Currently only the tbeam has a PMU // PMU initialization needs to be placed before i2c scanning power = new Power(); @@ -431,7 +439,7 @@ void setup() // accessories auto i2cScanner = std::unique_ptr(new ScanI2CTwoWire()); #if HAS_WIRE - LOG_INFO("Scanning for i2c devices..."); + LOG_INFO("Scan for i2c devices"); #endif #if defined(I2C_SDA1) && defined(ARCH_RP2040) @@ -456,7 +464,7 @@ void setup() i2cScanner->scanPort(ScanI2C::I2CPort::WIRE); #elif defined(ARCH_PORTDUINO) if (settingsStrings[i2cdev] != "") { - LOG_INFO("Scanning for i2c devices..."); + LOG_INFO("Scan for i2c devices"); i2cScanner->scanPort(ScanI2C::I2CPort::WIRE); } #elif HAS_WIRE @@ -523,6 +531,10 @@ void setup() // assign an arbitrary value to distinguish from other models kb_model = 0x11; break; + case ScanI2C::DeviceType::MPR121KB: + // assign an arbitrary value to distinguish from other models + kb_model = 0x37; + break; default: // use this as default since it's also just zero LOG_WARN("kb_info.type is unknown(0x%02x), setting kb_model=0x00", kb_info.type); @@ -564,48 +576,37 @@ void setup() LOG_DEBUG("acc_info = %i", acc_info.type); #endif -#define STRING(S) #S - -#define SCANNER_TO_SENSORS_MAP(SCANNER_T, PB_T) \ - { \ - auto found = i2cScanner->find(SCANNER_T); \ - if (found.type != ScanI2C::DeviceType::NONE) { \ - nodeTelemetrySensorsMap[PB_T].first = found.address.address; \ - nodeTelemetrySensorsMap[PB_T].second = i2cScanner->fetchI2CBus(found.address); \ - LOG_DEBUG("found i2c sensor %s", STRING(PB_T)); \ - } \ - } - - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_680, meshtastic_TelemetrySensorType_BME680) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BME_280, meshtastic_TelemetrySensorType_BME280) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_280, meshtastic_TelemetrySensorType_BMP280) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_3XX, meshtastic_TelemetrySensorType_BMP3XX) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::BMP_085, meshtastic_TelemetrySensorType_BMP085) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA260, meshtastic_TelemetrySensorType_INA260) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA219, meshtastic_TelemetrySensorType_INA219) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::INA3221, meshtastic_TelemetrySensorType_INA3221) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MAX17048, meshtastic_TelemetrySensorType_MAX17048) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::SHT31, meshtastic_TelemetrySensorType_SHT31) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::SHTC3, meshtastic_TelemetrySensorType_SHTC3) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::LPS22HB, meshtastic_TelemetrySensorType_LPS22) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC6310, meshtastic_TelemetrySensorType_QMC6310) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::HMC5883L, meshtastic_TelemetrySensorType_QMC5883L) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::RCWL9620, meshtastic_TelemetrySensorType_RCWL9620) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::VEML7700, meshtastic_TelemetrySensorType_VEML7700) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::TSL2591, meshtastic_TelemetrySensorType_TSL25911FN) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::OPT3001, meshtastic_TelemetrySensorType_OPT3001) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MLX90632, meshtastic_TelemetrySensorType_MLX90632) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MLX90614, meshtastic_TelemetrySensorType_MLX90614) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::SHT4X, meshtastic_TelemetrySensorType_SHT4X) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::AHT10, meshtastic_TelemetrySensorType_AHT10) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::DFROBOT_LARK, meshtastic_TelemetrySensorType_DFROBOT_LARK) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::ICM20948, meshtastic_TelemetrySensorType_ICM20948) - SCANNER_TO_SENSORS_MAP(ScanI2C::DeviceType::MAX30102, meshtastic_TelemetrySensorType_MAX30102) + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::BME_680, meshtastic_TelemetrySensorType_BME680); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::BME_280, meshtastic_TelemetrySensorType_BME280); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::BMP_280, meshtastic_TelemetrySensorType_BMP280); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::BMP_3XX, meshtastic_TelemetrySensorType_BMP3XX); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::BMP_085, meshtastic_TelemetrySensorType_BMP085); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA260, meshtastic_TelemetrySensorType_INA260); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA226, meshtastic_TelemetrySensorType_INA226); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA219, meshtastic_TelemetrySensorType_INA219); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::INA3221, meshtastic_TelemetrySensorType_INA3221); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX17048, meshtastic_TelemetrySensorType_MAX17048); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MCP9808, meshtastic_TelemetrySensorType_MCP9808); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHT31, meshtastic_TelemetrySensorType_SHT31); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHTC3, meshtastic_TelemetrySensorType_SHTC3); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::LPS22HB, meshtastic_TelemetrySensorType_LPS22); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC6310, meshtastic_TelemetrySensorType_QMC6310); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMI8658, meshtastic_TelemetrySensorType_QMI8658); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::QMC5883L, meshtastic_TelemetrySensorType_QMC5883L); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::HMC5883L, meshtastic_TelemetrySensorType_QMC5883L); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::PMSA0031, meshtastic_TelemetrySensorType_PMSA003I); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::RCWL9620, meshtastic_TelemetrySensorType_RCWL9620); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::VEML7700, meshtastic_TelemetrySensorType_VEML7700); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::TSL2591, meshtastic_TelemetrySensorType_TSL25911FN); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::OPT3001, meshtastic_TelemetrySensorType_OPT3001); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MLX90632, meshtastic_TelemetrySensorType_MLX90632); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MLX90614, meshtastic_TelemetrySensorType_MLX90614); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::SHT4X, meshtastic_TelemetrySensorType_SHT4X); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::AHT10, meshtastic_TelemetrySensorType_AHT10); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::DFROBOT_LARK, meshtastic_TelemetrySensorType_DFROBOT_LARK); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::ICM20948, meshtastic_TelemetrySensorType_ICM20948); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::MAX30102, meshtastic_TelemetrySensorType_MAX30102); + scannerToSensorsMap(i2cScanner, ScanI2C::DeviceType::CGRADSENS, meshtastic_TelemetrySensorType_RADSENS); i2cScanner.reset(); #endif @@ -639,6 +640,8 @@ void setup() rp2040Setup(); #endif + initSPI(); // needed here before reading from littleFS + // We do this as early as possible because this loads preferences from flash // but we need to do this after main cpu init (esp32setup), because we need the random seed set nodeDB = new NodeDB; @@ -661,7 +664,7 @@ void setup() if (config.power.is_power_saving == true && IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_TRACKER, meshtastic_Config_DeviceConfig_Role_TAK_TRACKER, meshtastic_Config_DeviceConfig_Role_SENSOR)) - LOG_DEBUG("Tracker/Sensor: Skipping start melody"); + LOG_DEBUG("Tracker/Sensor: Skip start melody"); else playStartMelody(); @@ -702,7 +705,6 @@ void setup() #endif // Init our SPI controller (must be before screen and lora) - initSPI(); #ifdef ARCH_RP2040 #ifdef HW_SPI1_DEVICE SPI1.setSCK(LORA_SCK); @@ -711,12 +713,16 @@ void setup() pinMode(LORA_CS, OUTPUT); digitalWrite(LORA_CS, HIGH); SPI1.begin(false); -#else // HW_SPI1_DEVICE +#else // HW_SPI1_DEVICE SPI.setSCK(LORA_SCK); SPI.setTX(LORA_MOSI); SPI.setRX(LORA_MISO); SPI.begin(false); -#endif // HW_SPI1_DEVICE +#endif // HW_SPI1_DEVICE +#elif ARCH_PORTDUINO + if (settingsStrings[spidev] != "ch341") { + SPI.begin(); + } #elif !defined(ARCH_ESP32) // ARCH_RP2040 SPI.begin(); #else @@ -736,7 +742,7 @@ void setup() // setup TZ prior to time actions. #if !MESHTASTIC_EXCLUDE_TZ - LOG_DEBUG("Using compiled/slipstreamed %s", slipstreamTZString); // important, removing this clobbers our magic string + LOG_DEBUG("Use compiled/slipstreamed %s", slipstreamTZString); // important, removing this clobbers our magic string if (*config.device.tzdef && config.device.tzdef[0] != 0) { LOG_DEBUG("Saved TZ: %s ", config.device.tzdef); setenv("TZ", config.device.tzdef, 1); @@ -766,7 +772,7 @@ void setup() if (gps) { gpsStatus->observe(&gps->newStatus); } else { - LOG_DEBUG("Running without GPS."); + LOG_DEBUG("Run without GPS"); } } } @@ -779,7 +785,7 @@ void setup() nodeStatus->observe(&nodeDB->newStatus); #ifdef HAS_I2S - LOG_DEBUG("Starting audio thread"); + LOG_DEBUG("Start audio thread"); audioThread = new AudioThread(); #endif service = new MeshService(); @@ -826,63 +832,110 @@ void setup() #ifdef ARCH_PORTDUINO if (settingsMap[use_sx1262]) { if (!rIf) { - LOG_DEBUG("Attempting to activate sx1262 radio on SPI port %s", settingsStrings[spidev].c_str()); - LockingArduinoHal *RadioLibHAL = - new LockingArduinoHal(SPI, spiSettings, (settingsMap[ch341Quirk] ? settingsMap[busy] : RADIOLIB_NC)); + LOG_DEBUG("Activate sx1262 radio on SPI port %s", settingsStrings[spidev].c_str()); + if (settingsStrings[spidev] == "ch341") { + RadioLibHAL = ch341Hal; + } else { + RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + } rIf = new SX1262Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], settingsMap[busy]); if (!rIf->init()) { - LOG_ERROR("Failed to find SX1262 radio"); + LOG_WARN("No SX1262 radio"); delete rIf; exit(EXIT_FAILURE); } else { - LOG_INFO("SX1262 Radio init succeeded, using SX1262 radio"); + LOG_INFO("SX1262 init success"); } } } else if (settingsMap[use_rf95]) { if (!rIf) { - LOG_DEBUG("Attempting to activate rf95 radio on SPI port %s", settingsStrings[spidev].c_str()); - LockingArduinoHal *RadioLibHAL = - new LockingArduinoHal(SPI, spiSettings, (settingsMap[ch341Quirk] ? settingsMap[busy] : RADIOLIB_NC)); + LOG_DEBUG("Activate rf95 radio on SPI port %s", settingsStrings[spidev].c_str()); + RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); rIf = new RF95Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], settingsMap[busy]); if (!rIf->init()) { - LOG_ERROR("Failed to find RF95 radio"); + LOG_WARN("No RF95 radio"); delete rIf; rIf = NULL; exit(EXIT_FAILURE); } else { - LOG_INFO("RF95 Radio init succeeded, using RF95 radio"); + LOG_INFO("RF95 init success"); } } } else if (settingsMap[use_sx1280]) { if (!rIf) { - LOG_DEBUG("Attempting to activate sx1280 radio on SPI port %s", settingsStrings[spidev].c_str()); - LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + LOG_DEBUG("Activate sx1280 radio on SPI port %s", settingsStrings[spidev].c_str()); + RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); rIf = new SX1280Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], settingsMap[busy]); if (!rIf->init()) { - LOG_ERROR("Failed to find SX1280 radio"); + LOG_WARN("No SX1280 radio"); delete rIf; rIf = NULL; exit(EXIT_FAILURE); } else { - LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio"); + LOG_INFO("SX1280 init success"); + } + } + } else if (settingsMap[use_lr1110]) { + if (!rIf) { + LOG_DEBUG("Activate lr1110 radio on SPI port %s", settingsStrings[spidev].c_str()); + LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + rIf = new LR1110Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], + settingsMap[busy]); + if (!rIf->init()) { + LOG_WARN("No LR1110 radio"); + delete rIf; + rIf = NULL; + exit(EXIT_FAILURE); + } else { + LOG_INFO("LR1110 init success"); + } + } + } else if (settingsMap[use_lr1120]) { + if (!rIf) { + LOG_DEBUG("Activate lr1120 radio on SPI port %s", settingsStrings[spidev].c_str()); + LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + rIf = new LR1120Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], + settingsMap[busy]); + if (!rIf->init()) { + LOG_WARN("No LR1120 radio"); + delete rIf; + rIf = NULL; + exit(EXIT_FAILURE); + } else { + LOG_INFO("LR1120 init success"); + } + } + } else if (settingsMap[use_lr1121]) { + if (!rIf) { + LOG_DEBUG("Activate lr1121 radio on SPI port %s", settingsStrings[spidev].c_str()); + LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + rIf = new LR1121Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], + settingsMap[busy]); + if (!rIf->init()) { + LOG_WARN("No LR1121 radio"); + delete rIf; + rIf = NULL; + exit(EXIT_FAILURE); + } else { + LOG_INFO("LR1121 init success"); } } } else if (settingsMap[use_sx1268]) { if (!rIf) { - LOG_DEBUG("Attempting to activate sx1268 radio on SPI port %s", settingsStrings[spidev].c_str()); - LockingArduinoHal *RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); + LOG_DEBUG("Activate sx1268 radio on SPI port %s", settingsStrings[spidev].c_str()); + RadioLibHAL = new LockingArduinoHal(SPI, spiSettings); rIf = new SX1268Interface((LockingArduinoHal *)RadioLibHAL, settingsMap[cs], settingsMap[irq], settingsMap[reset], settingsMap[busy]); if (!rIf->init()) { - LOG_ERROR("Failed to find SX1268 radio"); + LOG_WARN("No SX1268 radio"); delete rIf; rIf = NULL; exit(EXIT_FAILURE); } else { - LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio"); + LOG_INFO("SX1268 init success"); } } } @@ -902,25 +955,25 @@ void setup() if (!rIf) { rIf = new STM32WLE5JCInterface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find STM32WL radio"); + LOG_WARN("No STM32WL radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("STM32WL Radio init succeeded, using STM32WL radio"); + LOG_INFO("STM32WL init success"); radioType = STM32WLx_RADIO; } } #endif -#if !HAS_RADIO && defined(ARCH_PORTDUINO) +#if defined(ARCH_PORTDUINO) if (!rIf) { rIf = new SimRadio; if (!rIf->init()) { - LOG_WARN("Failed to find simulated radio"); + LOG_WARN("No simulated radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("Using SIMULATED radio!"); + LOG_INFO("Use SIMULATED radio!"); radioType = SIM_RADIO; } } @@ -930,11 +983,11 @@ void setup() if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { rIf = new RF95Interface(RadioLibHAL, LORA_CS, RF95_IRQ, RF95_RESET, RF95_DIO1); if (!rIf->init()) { - LOG_WARN("Failed to find RF95 radio"); + LOG_WARN("No RF95 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("RF95 Radio init succeeded, using RF95 radio"); + LOG_INFO("RF95 init success"); radioType = RF95_RADIO; } } @@ -944,11 +997,11 @@ void setup() if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find SX1262 radio"); + LOG_WARN("No SX1262 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("SX1262 Radio init succeeded, using SX1262 radio"); + LOG_INFO("SX1262 init success"); radioType = SX1262_RADIO; } } @@ -959,12 +1012,12 @@ void setup() // Try using the specified TCXO voltage rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find SX1262 radio with TCXO, Vref %f V", tcxoVoltage); + LOG_WARN("No SX1262 radio with TCXO, Vref %f V", tcxoVoltage); delete rIf; rIf = NULL; tcxoVoltage = 0; // if it fails, set the TCXO voltage to zero for the next attempt } else { - LOG_WARN("SX1262 Radio init succeeded, TCXO, Vref %f V", tcxoVoltage); + LOG_WARN("SX1262 init success, TCXO, Vref %f V", tcxoVoltage); radioType = SX1262_RADIO; } } @@ -973,12 +1026,12 @@ void setup() // If specified TCXO voltage fails, attempt to use DIO3 as a reference instea rIf = new SX1262Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find SX1262 radio with XTAL, Vref %f V", tcxoVoltage); + LOG_WARN("No SX1262 radio with XTAL, Vref %f V", tcxoVoltage); delete rIf; rIf = NULL; tcxoVoltage = SX126X_DIO3_TCXO_VOLTAGE; // if it fails, set the TCXO voltage back for the next radio search } else { - LOG_INFO("SX1262 Radio init succeeded, XTAL, Vref %f V", tcxoVoltage); + LOG_INFO("SX1262 init success, XTAL, Vref %f V", tcxoVoltage); radioType = SX1262_RADIO; } } @@ -988,11 +1041,11 @@ void setup() if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { rIf = new SX1268Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find SX1268 radio"); + LOG_WARN("No SX1268 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("SX1268 Radio init succeeded, using SX1268 radio"); + LOG_INFO("SX1268 init success"); radioType = SX1268_RADIO; } } @@ -1002,11 +1055,11 @@ void setup() if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { rIf = new LLCC68Interface(RadioLibHAL, SX126X_CS, SX126X_DIO1, SX126X_RESET, SX126X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find LLCC68 radio"); + LOG_WARN("No LLCC68 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("LLCC68 Radio init succeeded, using LLCC68 radio"); + LOG_INFO("LLCC68 init success"); radioType = LLCC68_RADIO; } } @@ -1016,11 +1069,11 @@ void setup() if ((!rIf) && (config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { rIf = new LR1110Interface(RadioLibHAL, LR1110_SPI_NSS_PIN, LR1110_IRQ_PIN, LR1110_NRESET_PIN, LR1110_BUSY_PIN); if (!rIf->init()) { - LOG_WARN("Failed to find LR1110 radio"); + LOG_WARN("No LR1110 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("LR1110 Radio init succeeded, using LR1110 radio"); + LOG_INFO("LR1110 init success"); radioType = LR1110_RADIO; } } @@ -1030,11 +1083,11 @@ void setup() if (!rIf) { rIf = new LR1120Interface(RadioLibHAL, LR1120_SPI_NSS_PIN, LR1120_IRQ_PIN, LR1120_NRESET_PIN, LR1120_BUSY_PIN); if (!rIf->init()) { - LOG_WARN("Failed to find LR1120 radio"); + LOG_WARN("No LR1120 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("LR1120 Radio init succeeded, using LR1120 radio"); + LOG_INFO("LR1120 init success"); radioType = LR1120_RADIO; } } @@ -1044,11 +1097,11 @@ void setup() if (!rIf) { rIf = new LR1121Interface(RadioLibHAL, LR1121_SPI_NSS_PIN, LR1121_IRQ_PIN, LR1121_NRESET_PIN, LR1121_BUSY_PIN); if (!rIf->init()) { - LOG_WARN("Failed to find LR1121 radio"); + LOG_WARN("No LR1121 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("LR1121 Radio init succeeded, using LR1121 radio"); + LOG_INFO("LR1121 init success"); radioType = LR1121_RADIO; } } @@ -1058,11 +1111,11 @@ void setup() if (!rIf) { rIf = new SX1280Interface(RadioLibHAL, SX128X_CS, SX128X_DIO1, SX128X_RESET, SX128X_BUSY); if (!rIf->init()) { - LOG_WARN("Failed to find SX1280 radio"); + LOG_WARN("No SX1280 radio"); delete rIf; rIf = NULL; } else { - LOG_INFO("SX1280 Radio init succeeded, using SX1280 radio"); + LOG_INFO("SX1280 init success"); radioType = SX1280_RADIO; } } @@ -1070,7 +1123,7 @@ void setup() // check if the radio chip matches the selected region if ((config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (!rIf->wideLora())) { - LOG_WARN("Radio chip does not support 2.4GHz LoRa. Reverting to unset."); + LOG_WARN("LoRa chip does not support 2.4GHz. Revert to unset"); config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_UNSET; nodeDB->saveToDisk(SEGMENT_CONFIG); if (!rIf->reconfigure()) { @@ -1160,11 +1213,50 @@ extern meshtastic_DeviceMetadata getDeviceMetadata() deviceMetadata.position_flags = config.position.position_flags; deviceMetadata.hw_model = HW_VENDOR; deviceMetadata.hasRemoteHardware = moduleConfig.remote_hardware.enabled; + deviceMetadata.excluded_modules = meshtastic_ExcludedModules_EXCLUDED_NONE; +#if MESHTASTIC_EXCLUDE_REMOTEHARDWARE + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_REMOTEHARDWARE_CONFIG; +#endif +#if MESHTASTIC_EXCLUDE_AUDIO + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_AUDIO_CONFIG; +#endif +#if !HAS_SCREEN || NO_EXT_GPIO + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_CANNEDMSG_CONFIG | meshtastic_ExcludedModules_EXTNOTIF_CONFIG; +#endif +// Only edge case here is if we apply this a device with built in Accelerometer and want to detect interrupts +// We'll have to macro guard against those targets potentially +#if NO_EXT_GPIO + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_DETECTIONSENSOR_CONFIG; +#endif +// If we don't have any GPIO and we don't have GPS, no purpose in having serial config +#if NO_EXT_GPIO && NO_GPS + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_SERIAL_CONFIG; +#endif +#ifndef ARCH_ESP32 + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_PAXCOUNTER_CONFIG; +#endif +#if !defined(HAS_NCP5623) && !defined(RGBLED_RED) && !defined(HAS_NEOPIXEL) && !defined(UNPHONE) && !RAK_4631 + deviceMetadata.excluded_modules |= meshtastic_ExcludedModules_AMBIENTLIGHTING_CONFIG; +#endif + #if !(MESHTASTIC_EXCLUDE_PKI) deviceMetadata.hasPKC = true; #endif return deviceMetadata; } + +#if !MESHTASTIC_EXCLUDE_I2C +void scannerToSensorsMap(const std::unique_ptr &i2cScanner, ScanI2C::DeviceType deviceType, + meshtastic_TelemetrySensorType sensorType) +{ + auto found = i2cScanner->find(deviceType); + if (found.type != ScanI2C::DeviceType::NONE) { + nodeTelemetrySensorsMap[sensorType].first = found.address.address; + nodeTelemetrySensorsMap[sensorType].second = i2cScanner->fetchI2CBus(found.address); + } +} +#endif + #ifndef PIO_UNIT_TESTING void loop() { diff --git a/src/main.h b/src/main.h index 5722f7cf0..b3f58ae4b 100644 --- a/src/main.h +++ b/src/main.h @@ -10,9 +10,6 @@ #include "mesh/generated/meshtastic/telemetry.pb.h" #include #include -#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) -#include -#endif #if defined(ARCH_ESP32) && !defined(CONFIG_IDF_TARGET_ESP32S2) #include "nimble/NimbleBluetooth.h" extern NimbleBluetooth *nimbleBluetooth; @@ -21,6 +18,9 @@ extern NimbleBluetooth *nimbleBluetooth; #include "NRF52Bluetooth.h" extern NRF52Bluetooth *nrf52Bluetooth; #endif +#if !MESHTASTIC_EXCLUDE_I2C +#include "detect/ScanI2CTwoWire.h" +#endif #if ARCH_PORTDUINO extern HardwareSPI *DisplaySPI; @@ -39,10 +39,6 @@ extern bool pmu_found; extern bool isCharging; extern bool isUSBPowered; -#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) -extern ATECCX08A atecc; -#endif - #ifdef T_WATCH_S3 #include extern Adafruit_DRV2605 drv; @@ -84,6 +80,10 @@ extern bool pauseBluetoothLogging; void nrf52Setup(), esp32Setup(), nrf52Loop(), esp32Loop(), rp2040Setup(), clearBonds(), enterDfuMode(); meshtastic_DeviceMetadata getDeviceMetadata(); +#if !MESHTASTIC_EXCLUDE_I2C +void scannerToSensorsMap(const std::unique_ptr &i2cScanner, ScanI2C::DeviceType deviceType, + meshtastic_TelemetrySensorType sensorType); +#endif // We default to 4MHz SPI, SPI mode 0 extern SPISettings spiSettings; \ No newline at end of file diff --git a/src/mesh/Channels.cpp b/src/mesh/Channels.cpp index 211d9afd4..4bc91ce4e 100644 --- a/src/mesh/Channels.cpp +++ b/src/mesh/Channels.cpp @@ -1,5 +1,5 @@ #include "Channels.h" -#include "../userPrefs.h" + #include "CryptoEngine.h" #include "Default.h" #include "DisplayFormatters.h" @@ -117,13 +117,18 @@ void Channels::initDefaultChannel(ChannelIndex chIndex) static const uint8_t defaultpsk0[] = USERPREFS_CHANNEL_0_PSK; memcpy(channelSettings.psk.bytes, defaultpsk0, sizeof(defaultpsk0)); channelSettings.psk.size = sizeof(defaultpsk0); - #endif #ifdef USERPREFS_CHANNEL_0_NAME strcpy(channelSettings.name, USERPREFS_CHANNEL_0_NAME); #endif #ifdef USERPREFS_CHANNEL_0_PRECISION channelSettings.module_settings.position_precision = USERPREFS_CHANNEL_0_PRECISION; +#endif +#ifdef USERPREFS_CHANNEL_0_UPLINK_ENABLED + channelSettings.uplink_enabled = USERPREFS_CHANNEL_0_UPLINK_ENABLED; +#endif +#ifdef USERPREFS_CHANNEL_0_DOWNLINK_ENABLED + channelSettings.downlink_enabled = USERPREFS_CHANNEL_0_DOWNLINK_ENABLED; #endif break; case 1: @@ -131,13 +136,18 @@ void Channels::initDefaultChannel(ChannelIndex chIndex) static const uint8_t defaultpsk1[] = USERPREFS_CHANNEL_1_PSK; memcpy(channelSettings.psk.bytes, defaultpsk1, sizeof(defaultpsk1)); channelSettings.psk.size = sizeof(defaultpsk1); - #endif #ifdef USERPREFS_CHANNEL_1_NAME strcpy(channelSettings.name, USERPREFS_CHANNEL_1_NAME); #endif #ifdef USERPREFS_CHANNEL_1_PRECISION channelSettings.module_settings.position_precision = USERPREFS_CHANNEL_1_PRECISION; +#endif +#ifdef USERPREFS_CHANNEL_1_UPLINK_ENABLED + channelSettings.uplink_enabled = USERPREFS_CHANNEL_1_UPLINK_ENABLED; +#endif +#ifdef USERPREFS_CHANNEL_1_DOWNLINK_ENABLED + channelSettings.downlink_enabled = USERPREFS_CHANNEL_1_DOWNLINK_ENABLED; #endif break; case 2: @@ -145,13 +155,18 @@ void Channels::initDefaultChannel(ChannelIndex chIndex) static const uint8_t defaultpsk2[] = USERPREFS_CHANNEL_2_PSK; memcpy(channelSettings.psk.bytes, defaultpsk2, sizeof(defaultpsk2)); channelSettings.psk.size = sizeof(defaultpsk2); - #endif #ifdef USERPREFS_CHANNEL_2_NAME strcpy(channelSettings.name, USERPREFS_CHANNEL_2_NAME); #endif #ifdef USERPREFS_CHANNEL_2_PRECISION channelSettings.module_settings.position_precision = USERPREFS_CHANNEL_2_PRECISION; +#endif +#ifdef USERPREFS_CHANNEL_2_UPLINK_ENABLED + channelSettings.uplink_enabled = USERPREFS_CHANNEL_2_UPLINK_ENABLED; +#endif +#ifdef USERPREFS_CHANNEL_2_DOWNLINK_ENABLED + channelSettings.downlink_enabled = USERPREFS_CHANNEL_2_DOWNLINK_ENABLED; #endif break; default: @@ -163,19 +178,18 @@ CryptoKey Channels::getKey(ChannelIndex chIndex) { meshtastic_Channel &ch = getByIndex(chIndex); const meshtastic_ChannelSettings &channelSettings = ch.settings; - assert(ch.has_settings); CryptoKey k; memset(k.bytes, 0, sizeof(k.bytes)); // In case the user provided a short key, we want to pad the rest with zeros - if (ch.role == meshtastic_Channel_Role_DISABLED) { + if (!ch.has_settings || ch.role == meshtastic_Channel_Role_DISABLED) { k.length = -1; // invalid } else { memcpy(k.bytes, channelSettings.psk.bytes, channelSettings.psk.size); k.length = channelSettings.psk.size; if (k.length == 0) { if (ch.role == meshtastic_Channel_Role_SECONDARY) { - LOG_DEBUG("Unset PSK for secondary channel %s. using primary key", ch.settings.name); + LOG_DEBUG("Unset PSK for secondary channel %s. use primary key", ch.settings.name); k = getKey(primaryIndex); } else { LOG_WARN("User disabled encryption"); @@ -184,7 +198,7 @@ CryptoKey Channels::getKey(ChannelIndex chIndex) // Convert the short single byte variants of psk into variant that can be used more generally uint8_t pskIndex = k.bytes[0]; - LOG_DEBUG("Expanding short PSK #%d", pskIndex); + LOG_DEBUG("Expand short PSK #%d", pskIndex); if (pskIndex == 0) k.length = 0; // Turn off encryption else { @@ -304,7 +318,7 @@ bool Channels::anyMqttEnabled() { #if USERPREFS_EVENT_MODE // Don't publish messages on the public MQTT broker if we are in event mode - if (strcmp(moduleConfig.mqtt.address, default_mqtt_address) == 0) { + if (mqtt && mqtt.isUsingDefaultServer()) { return false; } #endif @@ -369,11 +383,11 @@ bool Channels::hasDefaultChannel() bool Channels::decryptForHash(ChannelIndex chIndex, ChannelHash channelHash) { if (chIndex > getNumChannels() || getHash(chIndex) != channelHash) { - // LOG_DEBUG("Skipping channel %d (hash %x) due to invalid hash/index, want=%x", chIndex, getHash(chIndex), + // LOG_DEBUG("Skip channel %d (hash %x) due to invalid hash/index, want=%x", chIndex, getHash(chIndex), // channelHash); return false; } else { - LOG_DEBUG("Using channel %d (hash 0x%x)", chIndex, channelHash); + LOG_DEBUG("Use channel %d (hash 0x%x)", chIndex, channelHash); setCrypto(chIndex); return true; } @@ -383,7 +397,7 @@ bool Channels::decryptForHash(ChannelIndex chIndex, ChannelHash channelHash) * * This method is called before encoding outbound packets * - * @eturn the (0 to 255) hash for that channel - if no suitable channel could be found, return -1 + * @return the (0 to 255) hash for that channel - if no suitable channel could be found, return -1 */ int16_t Channels::setActiveByIndex(ChannelIndex channelIndex) { diff --git a/src/mesh/CryptoEngine.cpp b/src/mesh/CryptoEngine.cpp index 282013ea0..1624ab0d5 100644 --- a/src/mesh/CryptoEngine.cpp +++ b/src/mesh/CryptoEngine.cpp @@ -18,7 +18,7 @@ */ void CryptoEngine::generateKeyPair(uint8_t *pubKey, uint8_t *privKey) { - LOG_DEBUG("Generating Curve25519 key pair..."); + LOG_DEBUG("Generate Curve25519 keypair"); Curve25519::dh1(public_key, private_key); memcpy(pubKey, public_key, sizeof(public_key)); memcpy(privKey, private_key, sizeof(private_key)); @@ -58,10 +58,16 @@ void CryptoEngine::clearKeys() * Encrypt a packet's payload using a key generated with Curve25519 and SHA256 * for a specific node. * - * @param bytes is updated in place + * @param toNode The MeshPacket `to` field. + * @param fromNode The MeshPacket `from` field. + * @param remotePublic The remote node's Curve25519 public key. + * @param packetId The MeshPacket `id` field. + * @param numBytes Number of bytes of plaintext in the bytes buffer. + * @param bytes Buffer containing plaintext input. + * @param bytesOut Output buffer to be populated with encrypted ciphertext. */ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtastic_UserLite_public_key_t remotePublic, - uint64_t packetNum, size_t numBytes, uint8_t *bytes, uint8_t *bytesOut) + uint64_t packetNum, size_t numBytes, const uint8_t *bytes, uint8_t *bytesOut) { uint8_t *auth; long extraNonceTmp = random(); @@ -80,8 +86,8 @@ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtas initNonce(fromNode, packetNum, extraNonceTmp); // Calculate the shared secret with the destination node and encrypt - printBytes("Attempting encrypt using nonce: ", nonce, 13); - printBytes("Attempting encrypt using shared_key starting with: ", shared_key, 8); + printBytes("Attempt encrypt with nonce: ", nonce, 13); + printBytes("Attempt encrypt with shared_key starting with: ", shared_key, 8); aes_ccm_ae(shared_key, 32, nonce, 8, bytes, numBytes, nullptr, 0, bytesOut, auth); // this can write up to 15 bytes longer than numbytes past bytesOut memcpy((uint8_t *)(auth + 8), &extraNonceTmp, @@ -93,14 +99,18 @@ bool CryptoEngine::encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtas * Decrypt a packet's payload using a key generated with Curve25519 and SHA256 * for a specific node. * - * @param bytes is updated in place + * @param fromNode The MeshPacket `from` field. + * @param remotePublic The remote node's Curve25519 public key. + * @param packetId The MeshPacket `id` field. + * @param numBytes Number of bytes of ciphertext in the bytes buffer. + * @param bytes Buffer containing ciphertext input. + * @param bytesOut Output buffer to be populated with decrypted plaintext. */ bool CryptoEngine::decryptCurve25519(uint32_t fromNode, meshtastic_UserLite_public_key_t remotePublic, uint64_t packetNum, - size_t numBytes, uint8_t *bytes, uint8_t *bytesOut) + size_t numBytes, const uint8_t *bytes, uint8_t *bytesOut) { - uint8_t *auth; // set to last 8 bytes of text? - uint32_t extraNonce; // pointer was not really used - auth = bytes + numBytes - 12; + const uint8_t *auth = bytes + numBytes - 12; // set to last 8 bytes of text? + uint32_t extraNonce; // pointer was not really used memcpy(&extraNonce, auth + 8, sizeof(uint32_t)); // do not use dereference on potential non aligned pointers : (uint32_t *)(auth + 8); LOG_INFO("Random nonce value: %d", extraNonce); @@ -117,8 +127,8 @@ bool CryptoEngine::decryptCurve25519(uint32_t fromNode, meshtastic_UserLite_publ crypto->hash(shared_key, 32); initNonce(fromNode, packetNum, extraNonce); - printBytes("Attempting decrypt using nonce: ", nonce, 13); - printBytes("Attempting decrypt using shared_key starting with: ", shared_key, 8); + printBytes("Attempt decrypt with nonce: ", nonce, 13); + printBytes("Attempt decrypt with shared_key starting with: ", shared_key, 8); return aes_ccm_ad(shared_key, 32, nonce, 8, bytes, numBytes - 12, nullptr, 0, auth, bytesOut); } @@ -185,7 +195,7 @@ concurrency::Lock *cryptLock; void CryptoEngine::setKey(const CryptoKey &k) { - LOG_DEBUG("Using AES%d key!", k.length * 8); + LOG_DEBUG("Use AES%d key!", k.length * 8); key = k; } @@ -249,4 +259,4 @@ void CryptoEngine::initNonce(uint32_t fromNode, uint64_t packetId, uint32_t extr } #ifndef HAS_CUSTOM_CRYPTO_ENGINE CryptoEngine *crypto = new CryptoEngine; -#endif \ No newline at end of file +#endif diff --git a/src/mesh/CryptoEngine.h b/src/mesh/CryptoEngine.h index 32862d95c..6bbcb3b8a 100644 --- a/src/mesh/CryptoEngine.h +++ b/src/mesh/CryptoEngine.h @@ -40,9 +40,9 @@ class CryptoEngine void clearKeys(); void setDHPrivateKey(uint8_t *_private_key); virtual bool encryptCurve25519(uint32_t toNode, uint32_t fromNode, meshtastic_UserLite_public_key_t remotePublic, - uint64_t packetNum, size_t numBytes, uint8_t *bytes, uint8_t *bytesOut); + uint64_t packetNum, size_t numBytes, const uint8_t *bytes, uint8_t *bytesOut); virtual bool decryptCurve25519(uint32_t fromNode, meshtastic_UserLite_public_key_t remotePublic, uint64_t packetNum, - size_t numBytes, uint8_t *bytes, uint8_t *bytesOut); + size_t numBytes, const uint8_t *bytes, uint8_t *bytesOut); virtual bool setDHPublicKey(uint8_t *publicKey); virtual void hash(uint8_t *bytes, size_t numBytes); diff --git a/src/mesh/Default.cpp b/src/mesh/Default.cpp index 0bedcfc91..1bd0340f8 100644 --- a/src/mesh/Default.cpp +++ b/src/mesh/Default.cpp @@ -1,5 +1,6 @@ #include "Default.h" -#include "../userPrefs.h" + +#include "meshUtils.h" uint32_t Default::getConfiguredOrDefaultMs(uint32_t configuredInterval, uint32_t defaultInterval) { @@ -40,9 +41,22 @@ uint32_t Default::getConfiguredOrDefaultMsScaled(uint32_t configured, uint32_t d if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER) return getConfiguredOrDefaultMs(configured, defaultValue); + // Additionally if we're a tracker or sensor, we want priority to send position and telemetry + if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_SENSOR, meshtastic_Config_DeviceConfig_Role_TRACKER)) + return getConfiguredOrDefaultMs(configured, defaultValue); + return getConfiguredOrDefaultMs(configured, defaultValue) * congestionScalingCoefficient(numOnlineNodes); } +uint32_t Default::getConfiguredOrMinimumValue(uint32_t configured, uint32_t minValue) +{ + // If zero, intervals should be coalesced later by getConfiguredOrDefault... methods + if (configured == 0) + return configured; + + return configured < minValue ? minValue : configured; +} + uint8_t Default::getConfiguredOrDefaultHopLimit(uint8_t configured) { #if USERPREFS_EVENT_MODE diff --git a/src/mesh/Default.h b/src/mesh/Default.h index 5641b5d25..d39886d1c 100644 --- a/src/mesh/Default.h +++ b/src/mesh/Default.h @@ -1,13 +1,15 @@ #pragma once #include #include +#include #define ONE_DAY 24 * 60 * 60 #define ONE_MINUTE_MS 60 * 1000 #define THIRTY_SECONDS_MS 30 * 1000 #define FIVE_SECONDS_MS 5 * 1000 +#define min_default_telemetry_interval_secs 30 * 60 #define default_gps_update_interval IF_ROUTER(ONE_DAY, 2 * 60) -#define default_telemetry_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 30 * 60) +#define default_telemetry_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 60 * 60) #define default_broadcast_interval_secs IF_ROUTER(ONE_DAY / 2, 15 * 60) #define default_wait_bluetooth_secs IF_ROUTER(1, 60) #define default_sds_secs IF_ROUTER(ONE_DAY, UINT32_MAX) // Default to forever super deep sleep @@ -17,7 +19,7 @@ #define default_node_info_broadcast_secs 3 * 60 * 60 #define default_neighbor_info_broadcast_secs 6 * 60 * 60 #define min_node_info_broadcast_secs 60 * 60 // No regular broadcasts of more than once an hour -#define min_neighbor_info_broadcast_secs 2 * 60 * 60 +#define min_neighbor_info_broadcast_secs 4 * 60 * 60 #define default_mqtt_address "mqtt.meshtastic.org" #define default_mqtt_username "meshdev" @@ -35,16 +37,35 @@ class Default static uint32_t getConfiguredOrDefault(uint32_t configured, uint32_t defaultValue); static uint32_t getConfiguredOrDefaultMsScaled(uint32_t configured, uint32_t defaultValue, uint32_t numOnlineNodes); static uint8_t getConfiguredOrDefaultHopLimit(uint8_t configured); + static uint32_t getConfiguredOrMinimumValue(uint32_t configured, uint32_t minValue); private: static float congestionScalingCoefficient(int numOnlineNodes) { - if (numOnlineNodes <= 40) { - return 1.0; // No scaling for 40 or fewer nodes + // Increase frequency of broadcasts for small networks regardless of preset + if (numOnlineNodes <= 10) { + return 0.6; + } else if (numOnlineNodes <= 20) { + return 0.7; + } else if (numOnlineNodes <= 30) { + return 0.8; + } else if (numOnlineNodes <= 40) { + return 1.0; } else { - // Sscaling based on number of nodes over 40 + float throttlingFactor = 0.075; + if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_SLOW) + throttlingFactor = 0.04; + else if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_MEDIUM_FAST) + throttlingFactor = 0.02; + else if (config.lora.use_preset && config.lora.modem_preset == meshtastic_Config_LoRaConfig_ModemPreset_SHORT_SLOW) + throttlingFactor = 0.01; + else if (config.lora.use_preset && + IS_ONE_OF(config.lora.modem_preset, meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST, + meshtastic_Config_LoRaConfig_ModemPreset_SHORT_TURBO)) + return 1.0; // Don't bother throttling for highest bandwidth presets + // Scaling up traffic based on number of nodes over 40 int nodesOverForty = (numOnlineNodes - 40); - return 1.0 + (nodesOverForty * 0.075); // Each number of online node scales by 0.075 + return 1.0 + (nodesOverForty * throttlingFactor); // Each number of online node scales by 0.075 (default) } } }; \ No newline at end of file diff --git a/src/mesh/FloodingRouter.cpp b/src/mesh/FloodingRouter.cpp index 268fee2b0..f94540905 100644 --- a/src/mesh/FloodingRouter.cpp +++ b/src/mesh/FloodingRouter.cpp @@ -1,5 +1,5 @@ #include "FloodingRouter.h" -#include "../userPrefs.h" + #include "configuration.h" #include "mesh-pb-constants.h" @@ -21,14 +21,30 @@ ErrorCode FloodingRouter::send(meshtastic_MeshPacket *p) bool FloodingRouter::shouldFilterReceived(const meshtastic_MeshPacket *p) { if (wasSeenRecently(p)) { // Note: this will also add a recent packet record - printPacket("Ignoring dupe incoming msg", p); + printPacket("Ignore dupe incoming msg", p); rxDupe++; if (config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER && - config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER) { + config.device.role != meshtastic_Config_DeviceConfig_Role_REPEATER && + config.device.role != meshtastic_Config_DeviceConfig_Role_ROUTER_LATE) { // cancel rebroadcast of this message *if* there was already one, unless we're a router/repeater! if (Router::cancelSending(p->from, p->id)) txRelayCanceled++; } + if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER_LATE && iface) { + iface->clampToLateRebroadcastWindow(getFrom(p), p->id); + } + + /* If the original transmitter is doing retransmissions (hopStart equals hopLimit) for a reliable transmission, e.g., when + the ACK got lost, we will handle the packet again to make sure it gets an ACK to its packet. */ + bool isRepeated = p->hop_start > 0 && p->hop_start == p->hop_limit; + if (isRepeated) { + LOG_DEBUG("Repeated reliable tx"); + if (!perhapsRebroadcast(p) && isToUs(p) && p->want_ack) { + // FIXME - channel index should be used, but the packet is still encrypted here + sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, 0, 0); + } + } + return true; } @@ -41,14 +57,8 @@ bool FloodingRouter::isRebroadcaster() config.device.rebroadcast_mode != meshtastic_Config_DeviceConfig_RebroadcastMode_NONE; } -void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c) +bool FloodingRouter::perhapsRebroadcast(const meshtastic_MeshPacket *p) { - bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) && (p->decoded.request_id != 0); - if (isAckorReply && !isToUs(p) && p->to != NODENUM_BROADCAST) { - // do not flood direct message that is ACKed or replied to - LOG_DEBUG("Rxd an ACK/reply not for me, cancel rebroadcast."); - Router::cancelSending(p->to, p->decoded.request_id); // cancel rebroadcast for this DM - } if (!isToUs(p) && (p->hop_limit > 0) && !isFromUs(p)) { if (p->id != 0) { if (isRebroadcaster()) { @@ -63,17 +73,34 @@ void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas } #endif - LOG_INFO("Rebroadcasting received floodmsg"); + LOG_INFO("Rebroadcast received floodmsg"); // Note: we are careful to resend using the original senders node id // We are careful not to call our hooked version of send() - because we don't want to check this again Router::send(tosend); + + return true; } else { - LOG_DEBUG("Not rebroadcasting: Role = CLIENT_MUTE or Rebroadcast Mode = NONE"); + LOG_DEBUG("No rebroadcast: Role = CLIENT_MUTE or Rebroadcast Mode = NONE"); } } else { - LOG_DEBUG("Ignoring 0 id broadcast"); + LOG_DEBUG("Ignore 0 id broadcast"); } } + + return false; +} + +void FloodingRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtastic_Routing *c) +{ + bool isAckorReply = (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) && (p->decoded.request_id != 0); + if (isAckorReply && !isToUs(p) && !isBroadcast(p->to)) { + // do not flood direct message that is ACKed or replied to + LOG_DEBUG("Rxd an ACK/reply not for me, cancel rebroadcast"); + Router::cancelSending(p->to, p->decoded.request_id); // cancel rebroadcast for this DM + } + + perhapsRebroadcast(p); + // handle the packet as normal Router::sniffReceived(p, c); } \ No newline at end of file diff --git a/src/mesh/FloodingRouter.h b/src/mesh/FloodingRouter.h index 0ed2b5582..52614f391 100644 --- a/src/mesh/FloodingRouter.h +++ b/src/mesh/FloodingRouter.h @@ -31,6 +31,10 @@ class FloodingRouter : public Router, protected PacketHistory private: bool isRebroadcaster(); + /** Check if we should rebroadcast this packet, and do so if needed + * @return true if rebroadcasted */ + bool perhapsRebroadcast(const meshtastic_MeshPacket *p); + public: /** * Constructor diff --git a/src/mesh/LR11x0Interface.cpp b/src/mesh/LR11x0Interface.cpp index dd6d97317..ce4f912ba 100644 --- a/src/mesh/LR11x0Interface.cpp +++ b/src/mesh/LR11x0Interface.cpp @@ -48,8 +48,10 @@ template bool LR11x0Interface::init() digitalWrite(LR11X0_POWER_EN, HIGH); #endif +#if ARCH_PORTDUINO + float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000; // FIXME: correct logic to default to not using TCXO if no voltage is specified for LR11x0_DIO3_TCXO_VOLTAGE -#if !defined(LR11X0_DIO3_TCXO_VOLTAGE) +#elif !defined(LR11X0_DIO3_TCXO_VOLTAGE) float tcxoVoltage = 0; // "TCXO reference voltage to be set on DIO3. Defaults to 1.6 V, set to 0 to skip." per // https://github.com/jgromes/RadioLib/blob/690a050ebb46e6097c5d00c371e961c1caa3b52e/src/modules/LR11x0/LR11x0.h#L471C26-L471C104 @@ -67,21 +69,23 @@ template bool LR11x0Interface::init() power = LR1110_MAX_POWER; if ((power > LR1120_MAX_POWER) && - (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) // clamp again if wide freq range + (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_LORA_24)) { // clamp again if wide freq range power = LR1120_MAX_POWER; + preambleLength = 12; // 12 is the default for operation above 2GHz + } limitPower(); #ifdef LR11X0_RF_SWITCH_SUBGHZ pinMode(LR11X0_RF_SWITCH_SUBGHZ, OUTPUT); digitalWrite(LR11X0_RF_SWITCH_SUBGHZ, getFreq() < 1e9 ? HIGH : LOW); - LOG_DEBUG("Setting RF0 switch to %s", getFreq() < 1e9 ? "SubGHz" : "2.4GHz"); + LOG_DEBUG("Set RF0 switch to %s", getFreq() < 1e9 ? "SubGHz" : "2.4GHz"); #endif #ifdef LR11X0_RF_SWITCH_2_4GHZ pinMode(LR11X0_RF_SWITCH_2_4GHZ, OUTPUT); digitalWrite(LR11X0_RF_SWITCH_2_4GHZ, getFreq() < 1e9 ? LOW : HIGH); - LOG_DEBUG("Setting RF1 switch to %s", getFreq() < 1e9 ? "SubGHz" : "2.4GHz"); + LOG_DEBUG("Set RF1 switch to %s", getFreq() < 1e9 ? "SubGHz" : "2.4GHz"); #endif int res = lora.begin(getFreq(), bw, sf, cr, syncWord, power, preambleLength, tcxoVoltage); @@ -120,7 +124,7 @@ template bool LR11x0Interface::init() if (dioAsRfSwitch) { lora.setRfSwitchTable(rfswitch_dio_pins, rfswitch_table); - LOG_DEBUG("Setting DIO RF switch", res); + LOG_DEBUG("Set DIO RF switch", res); } if (res == RADIOLIB_ERR_NONE) { @@ -159,11 +163,6 @@ template bool LR11x0Interface::reconfigure() if (err != RADIOLIB_ERR_NONE) RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); - // Hmm - seems to lower SNR when the signal levels are high. Leaving off for now... - // TODO: Confirm gain registers are okay now - // err = lora.setRxGain(true); - // assert(err == RADIOLIB_ERR_NONE); - err = lora.setSyncWord(syncWord); assert(err == RADIOLIB_ERR_NONE); diff --git a/src/mesh/MemoryPool.h b/src/mesh/MemoryPool.h index d30404b9f..c4af3c4ac 100644 --- a/src/mesh/MemoryPool.h +++ b/src/mesh/MemoryPool.h @@ -2,6 +2,8 @@ #include #include +#include +#include #include "PointerQueue.h" @@ -9,6 +11,7 @@ template class Allocator { public: + Allocator() : deleter([this](T *p) { this->release(p); }) {} virtual ~Allocator() {} /// Return a queable object which has been prefilled with zeros. Panic if no buffer is available @@ -43,12 +46,32 @@ template class Allocator return p; } + /// Variations of the above methods that return std::unique_ptr instead of raw pointers. + using UniqueAllocation = std::unique_ptr &>; + /// Return a queable object which has been prefilled with zeros. + /// std::unique_ptr wrapped variant of allocZeroed(). + UniqueAllocation allocUniqueZeroed() { return UniqueAllocation(allocZeroed(), deleter); } + /// Return a queable object which has been prefilled with zeros - allow timeout to wait for available buffers (you probably + /// don't want this version). + /// std::unique_ptr wrapped variant of allocZeroed(TickType_t maxWait). + UniqueAllocation allocUniqueZeroed(TickType_t maxWait) { return UniqueAllocation(allocZeroed(maxWait), deleter); } + /// Return a queable object which is a copy of some other object + /// std::unique_ptr wrapped variant of allocCopy(const T &src, TickType_t maxWait). + UniqueAllocation allocUniqueCopy(const T &src, TickType_t maxWait = portMAX_DELAY) + { + return UniqueAllocation(allocCopy(src, maxWait), deleter); + } + /// Return a buffer for use by others virtual void release(T *p) = 0; protected: // Alloc some storage virtual T *alloc(TickType_t maxWait) = 0; + + private: + // std::unique_ptr Deleter function; calls release(). + const std::function deleter; }; /** diff --git a/src/mesh/MeshModule.cpp b/src/mesh/MeshModule.cpp index 48c3ee47d..9de54ade5 100644 --- a/src/mesh/MeshModule.cpp +++ b/src/mesh/MeshModule.cpp @@ -33,7 +33,7 @@ MeshModule::~MeshModule() } meshtastic_MeshPacket *MeshModule::allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, - uint8_t hopStart, uint8_t hopLimit) + uint8_t hopLimit) { meshtastic_Routing c = meshtastic_Routing_init_default; @@ -50,7 +50,7 @@ meshtastic_MeshPacket *MeshModule::allocAckNak(meshtastic_Routing_Error err, Nod p->priority = meshtastic_MeshPacket_Priority_ACK; - p->hop_limit = routingModule->getHopLimitForResponse(hopStart, hopLimit); // Flood ACK back to original sender + p->hop_limit = hopLimit; // Flood ACK back to original sender p->to = to; p->decoded.request_id = idFrom; p->channel = chIndex; @@ -86,7 +86,7 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src) // Was this message directed to us specifically? Will be false if we are sniffing someone elses packets auto ourNodeNum = nodeDB->getNodeNum(); - bool toUs = mp.to == NODENUM_BROADCAST || isToUs(&mp); + bool toUs = isBroadcast(mp.to) || isToUs(&mp); for (auto i = modules->begin(); i != modules->end(); ++i) { auto &pi = **i; @@ -151,7 +151,7 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src) // If the requester didn't ask for a response we might need to discard unused replies to prevent memory leaks if (pi.myReply) { - LOG_DEBUG("Discarding an unneeded response"); + LOG_DEBUG("Discard an unneeded response"); packetPool.release(pi.myReply); pi.myReply = NULL; } @@ -168,7 +168,7 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src) if (isDecoded && mp.decoded.want_response && toUs) { if (currentReply) { - printPacket("Sending response", currentReply); + printPacket("Send response", currentReply); service->sendToMesh(currentReply); currentReply = NULL; } else if (mp.from != ourNodeNum && !ignoreRequest) { @@ -181,8 +181,8 @@ void MeshModule::callModules(meshtastic_MeshPacket &mp, RxSource src) // SECURITY NOTE! I considered sending back a different error code if we didn't find the psk (i.e. !isDecoded) // but opted NOT TO. Because it is not a good idea to let remote nodes 'probe' to find out which PSKs were "good" vs // bad. - routingModule->sendAckNak(meshtastic_Routing_Error_NO_RESPONSE, getFrom(&mp), mp.id, mp.channel, mp.hop_start, - mp.hop_limit); + routingModule->sendAckNak(meshtastic_Routing_Error_NO_RESPONSE, getFrom(&mp), mp.id, mp.channel, + routingModule->getHopLimitForResponse(mp.hop_start, mp.hop_limit)); } } @@ -295,4 +295,4 @@ bool MeshModule::isRequestingFocus() } else return false; } -#endif +#endif \ No newline at end of file diff --git a/src/mesh/MeshModule.h b/src/mesh/MeshModule.h index 7929ba972..a88f1e6ff 100644 --- a/src/mesh/MeshModule.h +++ b/src/mesh/MeshModule.h @@ -40,7 +40,7 @@ struct UIFrameEvent { enum Action { REDRAW_ONLY, // Don't change which frames are show, just redraw, asap REGENERATE_FRAMESET, // Regenerate (change? add? remove?) screen frames, honoring requestFocus() - REGENERATE_FRAMESET_BACKGROUND, // Regenerate screen frames, attempting to remain on the same frame throughout + REGENERATE_FRAMESET_BACKGROUND, // Regenerate screen frames, Attempt to remain on the same frame throughout } action = REDRAW_ONLY; // We might want to pass additional data inside this struct at some point @@ -162,7 +162,7 @@ class MeshModule virtual Observable *getUIFrameObservable() { return NULL; } meshtastic_MeshPacket *allocAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, - uint8_t hopStart = 0, uint8_t hopLimit = 0); + uint8_t hopLimit = 0); /// Send an error response for the specified packet. meshtastic_MeshPacket *allocErrorResponse(meshtastic_Routing_Error err, const meshtastic_MeshPacket *p); diff --git a/src/mesh/MeshPacketQueue.cpp b/src/mesh/MeshPacketQueue.cpp index 99ef41c1e..d7ee65800 100644 --- a/src/mesh/MeshPacketQueue.cpp +++ b/src/mesh/MeshPacketQueue.cpp @@ -16,6 +16,12 @@ inline uint32_t getPriority(const meshtastic_MeshPacket *p) bool CompareMeshPacketFunc(const meshtastic_MeshPacket *p1, const meshtastic_MeshPacket *p2) { assert(p1 && p2); + + // If one packet is in the late transmit window, prefer the other one + if ((bool)p1->tx_after != (bool)p2->tx_after) { + return !p1->tx_after; + } + auto p1p = getPriority(p1), p2p = getPriority(p2); // If priorities differ, use that // for equal priorities, prefer packets already on mesh. @@ -94,11 +100,11 @@ meshtastic_MeshPacket *MeshPacketQueue::getFront() } /** Attempt to find and remove a packet from this queue. Returns a pointer to the removed packet, or NULL if not found */ -meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id) +meshtastic_MeshPacket *MeshPacketQueue::remove(NodeNum from, PacketId id, bool tx_normal, bool tx_late) { for (auto it = queue.begin(); it != queue.end(); it++) { auto p = (*it); - if (getFrom(p) == from && p->id == id) { + if (getFrom(p) == from && p->id == id && ((tx_normal && !p->tx_after) || (tx_late && p->tx_after))) { queue.erase(it); return p; } @@ -114,9 +120,10 @@ bool MeshPacketQueue::replaceLowerPriorityPacket(meshtastic_MeshPacket *p) if (queue.empty()) { return false; // No packets to replace } + // Check if the packet at the back has a lower priority than the new packet auto &backPacket = queue.back(); - if (backPacket->priority < p->priority) { + if (!backPacket->tx_after && backPacket->priority < p->priority) { // Remove the back packet packetPool.release(backPacket); queue.pop_back(); @@ -125,6 +132,19 @@ bool MeshPacketQueue::replaceLowerPriorityPacket(meshtastic_MeshPacket *p) return true; } + if (backPacket->tx_after) { + // Check if there's a non-late packet with lower priority + auto it = queue.end(); + auto refPacket = *--it; + for (; refPacket->tx_after && it != queue.begin(); refPacket = *--it) + ; + if (!refPacket->tx_after && refPacket->priority < p->priority) { + packetPool.release(refPacket); + enqueue(refPacket); + return true; + } + } + // If the back packet's priority is not lower, no replacement occurs return false; } \ No newline at end of file diff --git a/src/mesh/MeshPacketQueue.h b/src/mesh/MeshPacketQueue.h index 3c28fc5ce..b41a214b9 100644 --- a/src/mesh/MeshPacketQueue.h +++ b/src/mesh/MeshPacketQueue.h @@ -36,5 +36,5 @@ class MeshPacketQueue meshtastic_MeshPacket *getFront(); /** Attempt to find and remove a packet from this queue. Returns the packet which was removed from the queue */ - meshtastic_MeshPacket *remove(NodeNum from, PacketId id); -}; + meshtastic_MeshPacket *remove(NodeNum from, PacketId id, bool tx_normal = true, bool tx_late = true); +}; \ No newline at end of file diff --git a/src/mesh/MeshService.cpp b/src/mesh/MeshService.cpp index d224c05dc..773ab7053 100644 --- a/src/mesh/MeshService.cpp +++ b/src/mesh/MeshService.cpp @@ -13,6 +13,7 @@ #include "TypeConversions.h" #include "main.h" #include "mesh-pb-constants.h" +#include "meshUtils.h" #include "modules/NodeInfoModule.h" #include "modules/PositionModule.h" #include "power.h" @@ -78,17 +79,19 @@ int MeshService::handleFromRadio(const meshtastic_MeshPacket *mp) powerFSM.trigger(EVENT_PACKET_FOR_PHONE); // Possibly keep the node from sleeping nodeDB->updateFrom(*mp); // update our DB state based off sniffing every RX packet from the radio + bool isPreferredRebroadcaster = + IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_ROUTER, meshtastic_Config_DeviceConfig_Role_REPEATER); if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag && mp->decoded.portnum == meshtastic_PortNum_TELEMETRY_APP && mp->decoded.request_id > 0) { - LOG_DEBUG("Received telemetry response. Skip sending our NodeInfo."); // because this potentially a Repeater which will - // ignore our request for its NodeInfo + LOG_DEBUG("Received telemetry response. Skip sending our NodeInfo"); // because this potentially a Repeater which will + // ignore our request for its NodeInfo } else if (mp->which_payload_variant == meshtastic_MeshPacket_decoded_tag && !nodeDB->getMeshNode(mp->from)->has_user && - nodeInfoModule) { - LOG_INFO("Heard new node on channel %d, sending NodeInfo and asking for a response.", mp->channel); + nodeInfoModule && !isPreferredRebroadcaster && !nodeDB->isFull()) { if (airTime->isTxAllowedChannelUtil(true)) { + LOG_INFO("Heard new node on ch. %d, send NodeInfo and ask for response", mp->channel); nodeInfoModule->sendOurNodeInfo(mp->from, true, mp->channel); } else { - LOG_DEBUG("Skip sending NodeInfo due to > 25 percent channel util."); + LOG_DEBUG("Skip sending NodeInfo > 25%% ch. util"); } } @@ -163,27 +166,10 @@ NodeNum MeshService::getNodenumFromRequestId(uint32_t request_id) */ void MeshService::handleToRadio(meshtastic_MeshPacket &p) { -#if defined(ARCH_PORTDUINO) && !HAS_RADIO - // Simulates device is receiving a packet via the LoRa chip - if (p.decoded.portnum == meshtastic_PortNum_SIMULATOR_APP) { - // Simulator packet (=Compressed packet) is encapsulated in a MeshPacket, so need to unwrap first - meshtastic_Compressed scratch; - meshtastic_Compressed *decoded = NULL; - if (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag) { - memset(&scratch, 0, sizeof(scratch)); - p.decoded.payload.size = - pb_decode_from_bytes(p.decoded.payload.bytes, p.decoded.payload.size, &meshtastic_Compressed_msg, &scratch); - if (p.decoded.payload.size) { - decoded = &scratch; - // Extract the original payload and replace - memcpy(&p.decoded.payload, &decoded->data, sizeof(decoded->data)); - // Switch the port from PortNum_SIMULATOR_APP back to the original PortNum - p.decoded.portnum = decoded->portnum; - } else - LOG_ERROR("Error decoding protobuf for simulator message!"); - } - // Let SimRadio receive as if it did via its LoRa chip - SimRadio::instance->startReceive(&p); +#if defined(ARCH_PORTDUINO) + if (SimRadio::instance && p.decoded.portnum == meshtastic_PortNum_SIMULATOR_APP) { + // Simulates device received a packet via the LoRa chip + SimRadio::instance->unpackAndReceive(p); return; } #endif @@ -222,7 +208,7 @@ ErrorCode MeshService::sendQueueStatusToPhone(const meshtastic_QueueStatus &qs, copied->mesh_packet_id = mesh_packet_id; if (toPhoneQueueStatusQueue.numFree() == 0) { - LOG_INFO("tophone queue status queue is full, discarding oldest"); + LOG_INFO("tophone queue status queue is full, discard oldest"); meshtastic_QueueStatus *d = toPhoneQueueStatusQueue.dequeuePtr(0); if (d) releaseQueueStatusToPool(d); @@ -252,9 +238,14 @@ void MeshService::sendToMesh(meshtastic_MeshPacket *p, RxSource src, bool ccToPh LOG_DEBUG("Can't send status to phone"); } - if (res == ERRNO_OK && ccToPhone) { // Check if p is not released in case it couldn't be sent + if ((res == ERRNO_OK || res == ERRNO_SHOULD_RELEASE) && ccToPhone) { // Check if p is not released in case it couldn't be sent sendToPhone(packetPool.allocCopy(*p)); } + + // Router may ask us to release the packet if it wasn't sent + if (res == ERRNO_SHOULD_RELEASE) { + releaseToPool(p); + } } bool MeshService::trySendPosition(NodeNum dest, bool wantReplies) @@ -263,17 +254,17 @@ bool MeshService::trySendPosition(NodeNum dest, bool wantReplies) assert(node); - if (hasValidPosition(node)) { + if (nodeDB->hasValidPosition(node)) { #if HAS_GPS && !MESHTASTIC_EXCLUDE_GPS if (positionModule) { - LOG_INFO("Sending position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel); + LOG_INFO("Send position ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel); positionModule->sendOurPosition(dest, wantReplies, node->channel); return true; } } else { #endif if (nodeInfoModule) { - LOG_INFO("Sending nodeinfo ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel); + LOG_INFO("Send nodeinfo ping to 0x%x, wantReplies=%d, channel=%d", dest, wantReplies, node->channel); nodeInfoModule->sendOurNodeInfo(dest, wantReplies, node->channel); } } @@ -298,12 +289,12 @@ void MeshService::sendToPhone(meshtastic_MeshPacket *p) if (toPhoneQueue.numFree() == 0) { if (p->decoded.portnum == meshtastic_PortNum_TEXT_MESSAGE_APP || p->decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP) { - LOG_WARN("ToPhone queue is full, discarding oldest"); + LOG_WARN("ToPhone queue is full, discard oldest"); meshtastic_MeshPacket *d = toPhoneQueue.dequeuePtr(0); if (d) releaseToPool(d); } else { - LOG_WARN("ToPhone queue is full, dropping packet."); + LOG_WARN("ToPhone queue is full, drop packet"); releaseToPool(p); fromNum++; // Make sure to notify observers in case they are reconnected so they can get the packets return; @@ -316,9 +307,9 @@ void MeshService::sendToPhone(meshtastic_MeshPacket *p) void MeshService::sendMqttMessageToClientProxy(meshtastic_MqttClientProxyMessage *m) { - LOG_DEBUG("Sending mqtt message on topic '%s' to client for proxy", m->topic); + LOG_DEBUG("Send mqtt message on topic '%s' to client for proxy", m->topic); if (toPhoneMqttProxyQueue.numFree() == 0) { - LOG_WARN("MqttClientProxyMessagePool queue is full, discarding oldest"); + LOG_WARN("MqttClientProxyMessagePool queue is full, discard oldest"); meshtastic_MqttClientProxyMessage *d = toPhoneMqttProxyQueue.dequeuePtr(0); if (d) releaseMqttClientProxyMessageToPool(d); @@ -330,9 +321,9 @@ void MeshService::sendMqttMessageToClientProxy(meshtastic_MqttClientProxyMessage void MeshService::sendClientNotification(meshtastic_ClientNotification *n) { - LOG_DEBUG("Sending client notification to phone"); + LOG_DEBUG("Send client notification to phone"); if (toPhoneClientNotificationQueue.numFree() == 0) { - LOG_WARN("ClientNotification queue is full, discarding oldest"); + LOG_WARN("ClientNotification queue is full, discard oldest"); meshtastic_ClientNotification *d = toPhoneClientNotificationQueue.dequeuePtr(0); if (d) releaseClientNotificationToPool(d); @@ -380,13 +371,13 @@ int MeshService::onGPSChanged(const meshtastic::GPSStatus *newStatus) pos = gps->p; } else { // The GPS has lost lock -#ifdef GPS_EXTRAVERBOSE +#ifdef GPS_DEBUG LOG_DEBUG("onGPSchanged() - lost validLocation"); #endif } // Used fixed position if configured regardless of GPS lock if (config.position.fixed_position) { - LOG_WARN("Using fixed position"); + LOG_WARN("Use fixed position"); pos = TypeConversions::ConvertToPosition(node->position); } @@ -418,4 +409,4 @@ uint32_t MeshService::GetTimeSinceMeshPacket(const meshtastic_MeshPacket *mp) delta = 0; return delta; -} +} \ No newline at end of file diff --git a/src/mesh/MeshService.h b/src/mesh/MeshService.h index 1ccca4e6d..268c4308f 100644 --- a/src/mesh/MeshService.h +++ b/src/mesh/MeshService.h @@ -10,7 +10,7 @@ #include "MeshTypes.h" #include "Observer.h" #include "PointerQueue.h" -#if defined(ARCH_PORTDUINO) && !HAS_RADIO +#if defined(ARCH_PORTDUINO) #include "../platform/portduino/SimRadio.h" #endif #if defined(ARCH_ESP32) || defined(ARCH_PORTDUINO) @@ -165,4 +165,4 @@ class MeshService friend class RoutingModule; }; -extern MeshService *service; +extern MeshService *service; \ No newline at end of file diff --git a/src/mesh/MeshTypes.h b/src/mesh/MeshTypes.h index 27d100fbe..1d6bd342d 100644 --- a/src/mesh/MeshTypes.h +++ b/src/mesh/MeshTypes.h @@ -16,6 +16,7 @@ typedef uint32_t PacketId; // A packet sequence number #define ERRNO_NO_INTERFACES 33 #define ERRNO_UNKNOWN 32 // pick something that doesn't conflict with RH_ROUTER_ERROR_UNABLE_TO_DELIVER #define ERRNO_DISABLED 34 // the interface is disabled +#define ERRNO_SHOULD_RELEASE 35 // no error, but the packet should still be released #define ID_COUNTER_MASK (UINT32_MAX >> 22) // mask to select the counter portion of the ID /* @@ -43,6 +44,7 @@ typedef int ErrorCode; /// Alloc and free packets to our global, ISR safe pool extern Allocator &packetPool; +using UniquePacketPoolPacket = Allocator::UniqueAllocation; /** * Most (but not always) of the time we want to treat packets 'from' the local phone (where from == 0), as if they originated on @@ -57,4 +59,6 @@ bool isFromUs(const meshtastic_MeshPacket *p); bool isToUs(const meshtastic_MeshPacket *p); /* Some clients might not properly set priority, therefore we fix it here. */ -void fixPriority(meshtastic_MeshPacket *p); \ No newline at end of file +void fixPriority(meshtastic_MeshPacket *p); + +bool isBroadcast(uint32_t dest); \ No newline at end of file diff --git a/src/mesh/NodeDB.cpp b/src/mesh/NodeDB.cpp index 558c5b825..9dbe92b7c 100644 --- a/src/mesh/NodeDB.cpp +++ b/src/mesh/NodeDB.cpp @@ -1,4 +1,3 @@ -#include "../userPrefs.h" #include "configuration.h" #if !MESHTASTIC_EXCLUDE_GPS #include "GPS.h" @@ -32,9 +31,14 @@ #if HAS_WIFI #include "mesh/wifi/WiFiAPClient.h" #endif +#include "SPILock.h" #include "modules/StoreForwardModule.h" #include +#include +#include #include +#include +#include #endif #ifdef ARCH_PORTDUINO @@ -53,9 +57,92 @@ NodeDB *nodeDB = nullptr; EXT_RAM_BSS_ATTR meshtastic_DeviceState devicestate; meshtastic_MyNodeInfo &myNodeInfo = devicestate.my_node; meshtastic_LocalConfig config; +meshtastic_DeviceUIConfig uiconfig{.screen_brightness = 153, .screen_timeout = 30}; meshtastic_LocalModuleConfig moduleConfig; meshtastic_ChannelFile channelFile; +#ifdef USERPREFS_USE_ADMIN_KEY_0 +static unsigned char userprefs_admin_key_0[] = USERPREFS_USE_ADMIN_KEY_0; +#endif +#ifdef USERPREFS_USE_ADMIN_KEY_1 +static unsigned char userprefs_admin_key_1[] = USERPREFS_USE_ADMIN_KEY_1; +#endif +#ifdef USERPREFS_USE_ADMIN_KEY_2 +static unsigned char userprefs_admin_key_2[] = USERPREFS_USE_ADMIN_KEY_2; +#endif + +#ifdef HELTEC_MESH_NODE_T114 + +uint32_t read8(uint8_t bits, uint8_t dummy, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst) +{ + uint32_t ret = 0; + uint8_t SDAPIN = mosi; + pinMode(SDAPIN, INPUT_PULLUP); + digitalWrite(dc, HIGH); + for (int i = 0; i < dummy; i++) { // any dummy clocks + digitalWrite(sck, HIGH); + delay(1); + digitalWrite(sck, LOW); + delay(1); + } + for (int i = 0; i < bits; i++) { // read results + ret <<= 1; + delay(1); + if (digitalRead(SDAPIN)) + ret |= 1; + ; + digitalWrite(sck, HIGH); + delay(1); + digitalWrite(sck, LOW); + } + return ret; +} + +void write9(uint8_t val, uint8_t dc_val, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst) +{ + pinMode(mosi, OUTPUT); + digitalWrite(dc, dc_val); + for (int i = 0; i < 8; i++) { // send command + digitalWrite(mosi, (val & 0x80) != 0); + delay(1); + digitalWrite(sck, HIGH); + delay(1); + digitalWrite(sck, LOW); + val <<= 1; + } +} + +uint32_t readwrite8(uint8_t cmd, uint8_t bits, uint8_t dummy, uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst) +{ + digitalWrite(cs, LOW); + write9(cmd, 0, cs, sck, mosi, dc, rst); + uint32_t ret = read8(bits, dummy, cs, sck, mosi, dc, rst); + digitalWrite(cs, HIGH); + return ret; +} + +uint32_t get_st7789_id(uint8_t cs, uint8_t sck, uint8_t mosi, uint8_t dc, uint8_t rst) +{ + pinMode(cs, OUTPUT); + digitalWrite(cs, HIGH); + pinMode(cs, OUTPUT); + pinMode(sck, OUTPUT); + pinMode(mosi, OUTPUT); + pinMode(dc, OUTPUT); + pinMode(rst, OUTPUT); + digitalWrite(rst, LOW); // Hardware Reset + delay(10); + digitalWrite(rst, HIGH); + delay(10); + + uint32_t ID = 0; + ID = readwrite8(0x04, 24, 1, cs, sck, mosi, dc, rst); + ID = readwrite8(0x04, 24, 1, cs, sck, mosi, dc, rst); // ST7789 needs twice + return ID; +} + +#endif + bool meshtastic_DeviceState_callback(pb_istream_t *istream, pb_ostream_t *ostream, const pb_field_iter_t *field) { if (ostream) { @@ -100,7 +187,7 @@ static uint8_t ourMacAddr[6]; NodeDB::NodeDB() { - LOG_INFO("Initializing NodeDB"); + LOG_INFO("Init NodeDB"); loadFromDisk(); cleanupMeshDB(); @@ -109,6 +196,44 @@ NodeDB::NodeDB() uint32_t channelFileCRC = crc32Buffer(&channelFile, sizeof(channelFile)); int saveWhat = 0; + // bool hasUniqueId = false; + // Get device unique id +#if defined(ARCH_ESP32) && defined(ESP_EFUSE_OPTIONAL_UNIQUE_ID) + uint32_t unique_id[4]; + // ESP32 factory burns a unique id in efuse for S2+ series and evidently C3+ series + // This is used for HMACs in the esp-rainmaker AIOT platform and seems to be a good choice for us + esp_err_t err = esp_efuse_read_field_blob(ESP_EFUSE_OPTIONAL_UNIQUE_ID, unique_id, sizeof(unique_id) * 8); + if (err == ESP_OK) { + memcpy(myNodeInfo.device_id.bytes, unique_id, sizeof(unique_id)); + myNodeInfo.device_id.size = 16; + hasUniqueId = true; + } else { + LOG_WARN("Failed to read unique id from efuse"); + } +#elif defined(ARCH_NRF52) + // Nordic applies a FIPS compliant Random ID to each chip at the factory + // We concatenate the device address to the Random ID to create a unique ID for now + // This will likely utilize a crypto module in the future + uint64_t device_id_start = ((uint64_t)NRF_FICR->DEVICEID[1] << 32) | NRF_FICR->DEVICEID[0]; + uint64_t device_id_end = ((uint64_t)NRF_FICR->DEVICEADDR[1] << 32) | NRF_FICR->DEVICEADDR[0]; + memcpy(myNodeInfo.device_id.bytes, &device_id_start, sizeof(device_id_start)); + memcpy(myNodeInfo.device_id.bytes + sizeof(device_id_start), &device_id_end, sizeof(device_id_end)); + myNodeInfo.device_id.size = 16; + // Uncomment below to print the device id + // hasUniqueId = true; +#else + // FIXME - implement for other platforms +#endif + + // if (hasUniqueId) { + // std::string deviceIdHex; + // for (size_t i = 0; i < myNodeInfo.device_id.size; ++i) { + // char buf[3]; + // snprintf(buf, sizeof(buf), "%02X", myNodeInfo.device_id.bytes[i]); + // deviceIdHex += buf; + // } + // LOG_DEBUG("Device ID (HEX): %s", deviceIdHex.c_str()); + // } // likewise - we always want the app requirements to come from the running appload myNodeInfo.min_app_version = 30200; // format is Mmmss (where M is 1+the numeric major number. i.e. 30200 means 2.2.00 @@ -132,21 +257,23 @@ NodeDB::NodeDB() } #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN || MESHTASTIC_EXCLUDE_PKI) - bool keygenSuccess = false; - if (config.security.private_key.size == 32) { - if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) { + if (!owner.is_licensed) { + bool keygenSuccess = false; + if (config.security.private_key.size == 32) { + if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) { + keygenSuccess = true; + } + } else { + LOG_INFO("Generate new PKI keys"); + crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes); keygenSuccess = true; } - } else { - LOG_INFO("Generating new PKI keys"); - crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes); - keygenSuccess = true; - } - if (keygenSuccess) { - config.security.public_key.size = 32; - config.security.private_key.size = 32; - owner.public_key.size = 32; - memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32); + if (keygenSuccess) { + config.security.public_key.size = 32; + config.security.private_key.size = 32; + owner.public_key.size = 32; + memcpy(owner.public_key.bytes, config.security.public_key.bytes, 32); + } } #elif !(MESHTASTIC_EXCLUDE_PKI) // Calculate Curve25519 public and private keys @@ -171,6 +298,25 @@ NodeDB::NodeDB() resetRadioConfig(); // If bogus settings got saved, then fix them // nodeDB->LOG_DEBUG("region=%d, NODENUM=0x%x, dbsize=%d", config.lora.region, myNodeInfo.my_node_num, numMeshNodes); + // If we are setup to broadcast on the default channel, ensure that the telemetry intervals are coerced to the minimum value + // of 30 minutes or more + if (channels.isDefaultChannel(channels.getPrimaryIndex())) { + LOG_DEBUG("Coerce telemetry to min of 30 minutes on defaults"); + moduleConfig.telemetry.device_update_interval = Default::getConfiguredOrMinimumValue( + moduleConfig.telemetry.device_update_interval, min_default_telemetry_interval_secs); + moduleConfig.telemetry.environment_update_interval = Default::getConfiguredOrMinimumValue( + moduleConfig.telemetry.environment_update_interval, min_default_telemetry_interval_secs); + moduleConfig.telemetry.air_quality_interval = Default::getConfiguredOrMinimumValue( + moduleConfig.telemetry.air_quality_interval, min_default_telemetry_interval_secs); + moduleConfig.telemetry.power_update_interval = Default::getConfiguredOrMinimumValue( + moduleConfig.telemetry.power_update_interval, min_default_telemetry_interval_secs); + moduleConfig.telemetry.health_update_interval = Default::getConfiguredOrMinimumValue( + moduleConfig.telemetry.health_update_interval, min_default_telemetry_interval_secs); + } + // Ensure that the neighbor info update interval is coerced to the minimum + moduleConfig.neighbor_info.update_interval = + Default::getConfiguredOrMinimumValue(moduleConfig.neighbor_info.update_interval, min_neighbor_info_broadcast_secs); + if (devicestateCRC != crc32Buffer(&devicestate, sizeof(devicestate))) saveWhat |= SEGMENT_DEVICESTATE; if (configCRC != crc32Buffer(&config, sizeof(config))) @@ -182,6 +328,31 @@ NodeDB::NodeDB() config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_ENABLED; config.position.gps_enabled = 0; } +#ifdef USERPREFS_FIXED_GPS + if (myNodeInfo.reboot_count == 1) { // Check if First boot ever or after Factory Reset. + meshtastic_Position fixedGPS = meshtastic_Position_init_default; +#ifdef USERPREFS_FIXED_GPS_LAT + fixedGPS.latitude_i = (int32_t)(USERPREFS_FIXED_GPS_LAT * 1e7); + fixedGPS.has_latitude_i = true; +#endif +#ifdef USERPREFS_FIXED_GPS_LON + fixedGPS.longitude_i = (int32_t)(USERPREFS_FIXED_GPS_LON * 1e7); + fixedGPS.has_longitude_i = true; +#endif +#ifdef USERPREFS_FIXED_GPS_ALT + fixedGPS.altitude = USERPREFS_FIXED_GPS_ALT; + fixedGPS.has_altitude = true; +#endif +#if defined(USERPREFS_FIXED_GPS_LAT) && defined(USERPREFS_FIXED_GPS_LON) + fixedGPS.location_source = meshtastic_Position_LocSource_LOC_MANUAL; + config.has_position = true; + info->has_position = true; + info->position = TypeConversions::ConvertToPositionLite(fixedGPS); + nodeDB->setLocalPosition(fixedGPS); + config.position.fixed_position = true; +#endif + } +#endif saveToDisk(saveWhat); } @@ -206,6 +377,11 @@ bool isToUs(const meshtastic_MeshPacket *p) return p->to == nodeDB->getNodeNum(); } +bool isBroadcast(uint32_t dest) +{ + return dest == NODENUM_BROADCAST || dest == NODENUM_BROADCAST_NO_LORA; +} + bool NodeDB::resetRadioConfig(bool factory_reset) { bool didFactoryReset = false; @@ -217,7 +393,7 @@ bool NodeDB::resetRadioConfig(bool factory_reset) } if (channelFile.channels_count != MAX_NUM_CHANNELS) { - LOG_INFO("Setting default channel and radio preferences!"); + LOG_INFO("Set default channel and radio preferences!"); channels.initDefaults(); } @@ -228,7 +404,7 @@ bool NodeDB::resetRadioConfig(bool factory_reset) initRegion(); if (didFactoryReset) { - LOG_INFO("Rebooting due to factory reset"); + LOG_INFO("Reboot due to factory reset"); screen->startAlert("Rebooting..."); rebootAtMsec = millis() + (5 * 1000); } @@ -238,7 +414,7 @@ bool NodeDB::resetRadioConfig(bool factory_reset) bool NodeDB::factoryReset(bool eraseBleBonds) { - LOG_INFO("Performing factory reset!"); + LOG_INFO("Perform factory reset!"); // first, remove the "/prefs" (this removes most prefs) rmDir("/prefs"); #ifdef FSCom @@ -254,14 +430,14 @@ bool NodeDB::factoryReset(bool eraseBleBonds) // third, write everything to disk saveToDisk(); if (eraseBleBonds) { - LOG_INFO("Erasing BLE bonds"); + LOG_INFO("Erase BLE bonds"); #ifdef ARCH_ESP32 // This will erase what's in NVS including ssl keys, persistent variables and ble pairing nvs_flash_erase(); #endif #ifdef ARCH_NRF52 Bluefruit.begin(); - LOG_INFO("Clearing bluetooth bonds!"); + LOG_INFO("Clear bluetooth bonds!"); bond_print_list(BLE_GAP_ROLE_PERIPH); bond_print_list(BLE_GAP_ROLE_CENTRAL); Bluefruit.Periph.clearBonds(); @@ -278,7 +454,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) if (shouldPreserveKey) { memcpy(private_key_temp, config.security.private_key.bytes, config.security.private_key.size); } - LOG_INFO("Installing default LocalConfig"); + LOG_INFO("Install default LocalConfig"); memset(&config, 0, sizeof(meshtastic_LocalConfig)); config.version = DEVICESTATE_CUR_VER; config.has_device = true; @@ -312,11 +488,37 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) #else config.lora.ignore_mqtt = false; #endif -#ifdef USERPREFS_USE_ADMIN_KEY - memcpy(config.security.admin_key[0].bytes, USERPREFS_ADMIN_KEY, 32); - config.security.admin_key[0].size = 32; - config.security.admin_key_count = 1; + // Initialize admin_key_count to zero + byte numAdminKeys = 0; + +#ifdef USERPREFS_USE_ADMIN_KEY_0 + // Check if USERPREFS_ADMIN_KEY_0 is non-empty + if (sizeof(userprefs_admin_key_0) > 0) { + memcpy(config.security.admin_key[0].bytes, userprefs_admin_key_0, 32); + config.security.admin_key[0].size = 32; + numAdminKeys++; + } #endif + +#ifdef USERPREFS_USE_ADMIN_KEY_1 + // Check if USERPREFS_ADMIN_KEY_1 is non-empty + if (sizeof(userprefs_admin_key_1) > 0) { + memcpy(config.security.admin_key[1].bytes, userprefs_admin_key_1, 32); + config.security.admin_key[1].size = 32; + numAdminKeys++; + } +#endif + +#ifdef USERPREFS_USE_ADMIN_KEY_2 + // Check if USERPREFS_ADMIN_KEY_2 is non-empty + if (sizeof(userprefs_admin_key_2) > 0) { + memcpy(config.security.admin_key[2].bytes, userprefs_admin_key_2, 32); + config.security.admin_key[2].size = 32; + numAdminKeys++; + } +#endif + config.security.admin_key_count = numAdminKeys; + if (shouldPreserveKey) { config.security.private_key.size = 32; memcpy(config.security.private_key.bytes, private_key_temp, config.security.private_key.size); @@ -335,7 +537,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) #endif #if defined(USERPREFS_CONFIG_GPS_MODE) config.position.gps_mode = USERPREFS_CONFIG_GPS_MODE; -#elif !HAS_GPS || defined(T_DECK) || defined(TLORA_T3S3_EPAPER) +#elif !HAS_GPS || GPS_DEFAULT_NOT_PRESENT config.position.gps_mode = meshtastic_Config_PositionConfig_GpsMode_NOT_PRESENT; #elif !defined(GPS_RX_PIN) if (config.position.rx_gpio == 0) @@ -360,6 +562,12 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) #if defined(ST7735_CS) || defined(USE_EINK) || defined(ILI9341_DRIVER) || defined(ILI9342_DRIVER) || defined(ST7789_CS) || \ defined(HX8357_CS) || defined(USE_ST7789) bool hasScreen = true; +#ifdef HELTEC_MESH_NODE_T114 + uint32_t st7789_id = get_st7789_id(ST7789_NSS, ST7789_SCK, ST7789_SDA, ST7789_RS, ST7789_RESET); + if (st7789_id == 0xFFFFFF) { + hasScreen = false; + } +#endif #elif ARCH_PORTDUINO bool hasScreen = false; if (settingsMap[displayPanel]) @@ -369,8 +577,13 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) #else bool hasScreen = screen_found.port != ScanI2C::I2CPort::NO_I2C; #endif +#ifdef USERPREFS_FIXED_BLUETOOTH + config.bluetooth.fixed_pin = USERPREFS_FIXED_BLUETOOTH; + config.bluetooth.mode = meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN; +#else config.bluetooth.mode = hasScreen ? meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN : meshtastic_Config_BluetoothConfig_PairingMode_FIXED_PIN; +#endif // for backward compat, default position flags are ALT+MSL config.position.position_flags = (meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE | meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE_MSL | @@ -383,7 +596,7 @@ void NodeDB::installDefaultConfig(bool preserveKey = false) #ifdef RAK4630 config.display.wake_on_tap_or_motion = true; #endif -#ifdef T_WATCH_S3 +#if defined(T_WATCH_S3) || defined(SENSECAP_INDICATOR) config.display.screen_on_secs = 30; config.display.wake_on_tap_or_motion = true; #endif @@ -407,7 +620,7 @@ void NodeDB::initConfigIntervals() config.display.screen_on_secs = default_screen_on_secs; -#if defined(T_WATCH_S3) || defined(T_DECK) +#if defined(T_WATCH_S3) || defined(T_DECK) || defined(MESH_TAB) || defined(RAK14014) config.power.is_power_saving = true; config.display.screen_on_secs = 30; config.power.wait_bluetooth_secs = 30; @@ -416,7 +629,7 @@ void NodeDB::initConfigIntervals() void NodeDB::installDefaultModuleConfig() { - LOG_INFO("Installing default ModuleConfig"); + LOG_INFO("Install default ModuleConfig"); memset(&moduleConfig, 0, sizeof(meshtastic_ModuleConfig)); moduleConfig.version = DEVICESTATE_CUR_VER; @@ -494,8 +707,10 @@ void NodeDB::installRoleDefaults(meshtastic_Config_DeviceConfig_Role role) if (role == meshtastic_Config_DeviceConfig_Role_ROUTER) { initConfigIntervals(); initModuleConfigIntervals(); + config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY; } else if (role == meshtastic_Config_DeviceConfig_Role_REPEATER) { config.display.screen_on_secs = 1; + config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY; } else if (role == meshtastic_Config_DeviceConfig_Role_SENSOR) { moduleConfig.telemetry.environment_measurement_enabled = true; moduleConfig.telemetry.environment_update_interval = 300; @@ -549,7 +764,7 @@ void NodeDB::initModuleConfigIntervals() void NodeDB::installDefaultChannels() { - LOG_INFO("Installing default ChannelFile"); + LOG_INFO("Install default ChannelFile"); memset(&channelFile, 0, sizeof(meshtastic_ChannelFile)); channelFile.version = DEVICESTATE_CUR_VER; } @@ -579,7 +794,7 @@ void NodeDB::removeNodeByNum(NodeNum nodeNum) numMeshNodes -= removed; std::fill(devicestate.node_db_lite.begin() + numMeshNodes, devicestate.node_db_lite.begin() + numMeshNodes + 1, meshtastic_NodeInfoLite()); - LOG_DEBUG("NodeDB::removeNodeByNum purged %d entries. Saving changes...", removed); + LOG_DEBUG("NodeDB::removeNodeByNum purged %d entries. Save changes", removed); saveDeviceStateToDisk(); } @@ -616,7 +831,7 @@ void NodeDB::cleanupMeshDB() void NodeDB::installDefaultDeviceState() { - LOG_INFO("Installing default DeviceState"); + LOG_INFO("Install default DeviceState"); // memset(&devicestate, 0, sizeof(meshtastic_DeviceState)); numMeshNodes = 0; @@ -638,12 +853,12 @@ void NodeDB::installDefaultDeviceState() #ifdef USERPREFS_CONFIG_OWNER_LONG_NAME snprintf(owner.long_name, sizeof(owner.long_name), USERPREFS_CONFIG_OWNER_LONG_NAME); #else - snprintf(owner.long_name, sizeof(owner.long_name), "Meshtastic %02x%02x", ourMacAddr[4], ourMacAddr[5]); + snprintf(owner.long_name, sizeof(owner.long_name), "Meshtastic %04x", getNodeNum() & 0x0ffff); #endif #ifdef USERPREFS_CONFIG_OWNER_SHORT_NAME snprintf(owner.short_name, sizeof(owner.short_name), USERPREFS_CONFIG_OWNER_SHORT_NAME); #else - snprintf(owner.short_name, sizeof(owner.short_name), "%02x%02x", ourMacAddr[4], ourMacAddr[5]); + snprintf(owner.short_name, sizeof(owner.short_name), "%04x", getNodeNum() & 0x0ffff); #endif snprintf(owner.id, sizeof(owner.id), "!%08x", getNodeNum()); // Default node ID now based on nodenum memcpy(owner.macaddr, ourMacAddr, sizeof(owner.macaddr)); @@ -674,13 +889,14 @@ void NodeDB::pickNewNodeNum() nodeNum, found->user.macaddr[4], found->user.macaddr[5], ourMacAddr[4], ourMacAddr[5], candidate); nodeNum = candidate; } - LOG_DEBUG("Using nodenum 0x%x ", nodeNum); + LOG_DEBUG("Use nodenum 0x%x ", nodeNum); myNodeInfo.my_node_num = nodeNum; } static const char *prefFileName = "/prefs/db.proto"; static const char *configFileName = "/prefs/config.proto"; +static const char *uiconfigFileName = "/prefs/uiconfig.proto"; static const char *moduleConfigFileName = "/prefs/module.proto"; static const char *channelFileName = "/prefs/channels.proto"; @@ -694,7 +910,7 @@ LoadFileResult NodeDB::loadProto(const char *filename, size_t protoSize, size_t auto f = FSCom.open(filename, FILE_O_READ); if (f) { - LOG_INFO("Loading %s", filename); + LOG_INFO("Load %s", filename); pb_istream_t stream = {&readcb, &f, protoSize}; memset(dest_struct, 0, objSize); @@ -722,8 +938,13 @@ void NodeDB::loadFromDisk() 0; // Mark the current device state as completely unusable, so that if we fail reading the entire file from // disk we will still factoryReset to restore things. +#ifdef ARCH_ESP32 + if (FSCom.exists("/static/static")) + rmDir("/static/static"); // Remove bad static web files bundle from initial 2.5.13 release +#endif + // static DeviceState scratch; We no longer read into a tempbuf because this structure is 15KB of valuable RAM - auto state = loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES * sizeof(meshtastic_NodeInfo), + auto state = loadProto(prefFileName, sizeof(meshtastic_DeviceState) + MAX_NUM_NODES_FS * sizeof(meshtastic_NodeInfo), sizeof(meshtastic_DeviceState), &meshtastic_DeviceState_msg, &devicestate); // See https://github.com/meshtastic/firmware/issues/4184#issuecomment-2269390786 @@ -735,13 +956,17 @@ void NodeDB::loadFromDisk() // installDefaultDeviceState(); // Our in RAM copy might now be corrupt //} else { if (devicestate.version < DEVICESTATE_MIN_VER) { - LOG_WARN("Devicestate %d is old, discarding", devicestate.version); + LOG_WARN("Devicestate %d is old, discard", devicestate.version); installDefaultDeviceState(); } else { LOG_INFO("Loaded saved devicestate version %d, with nodecount: %d", devicestate.version, devicestate.node_db_lite.size()); meshNodes = &devicestate.node_db_lite; numMeshNodes = devicestate.node_db_lite.size(); } + if (numMeshNodes > MAX_NUM_NODES) { + LOG_WARN("Node count %d exceeds MAX_NUM_NODES %d, truncating", numMeshNodes, MAX_NUM_NODES); + numMeshNodes = MAX_NUM_NODES; + } meshNodes->resize(MAX_NUM_NODES); state = loadProto(configFileName, meshtastic_LocalConfig_size, sizeof(meshtastic_LocalConfig), &meshtastic_LocalConfig_msg, @@ -750,20 +975,68 @@ void NodeDB::loadFromDisk() installDefaultConfig(); // Our in RAM copy might now be corrupt } else { if (config.version < DEVICESTATE_MIN_VER) { - LOG_WARN("config %d is old, discarding", config.version); + LOG_WARN("config %d is old, discard", config.version); installDefaultConfig(true); } else { LOG_INFO("Loaded saved config version %d", config.version); } } + // Make sure we load hard coded admin keys even when the configuration file has none. + // Initialize admin_key_count to zero + byte numAdminKeys = 0; + uint16_t sum = 0; +#ifdef USERPREFS_USE_ADMIN_KEY_0 + for (uint8_t b = 0; b < 32; b++) { + sum += config.security.admin_key[0].bytes[b]; + } + if (sum == 0) { + numAdminKeys += 1; + LOG_INFO("Admin 0 key zero. Loading hard coded key from user preferences."); + memcpy(config.security.admin_key[0].bytes, userprefs_admin_key_0, 32); + config.security.admin_key[0].size = 32; + config.security.admin_key_count = numAdminKeys; + saveToDisk(SEGMENT_CONFIG); + } +#endif + +#ifdef USERPREFS_USE_ADMIN_KEY_1 + sum = 0; + for (uint8_t b = 0; b < 32; b++) { + sum += config.security.admin_key[1].bytes[b]; + } + if (sum == 0) { + numAdminKeys += 1; + LOG_INFO("Admin 1 key zero. Loading hard coded key from user preferences."); + memcpy(config.security.admin_key[1].bytes, userprefs_admin_key_1, 32); + config.security.admin_key[1].size = 32; + config.security.admin_key_count = numAdminKeys; + saveToDisk(SEGMENT_CONFIG); + } +#endif + +#ifdef USERPREFS_USE_ADMIN_KEY_2 + sum = 0; + for (uint8_t b = 0; b < 32; b++) { + sum += config.security.admin_key[2].bytes[b]; + } + if (sum == 0) { + numAdminKeys += 1; + LOG_INFO("Admin 2 key zero. Loading hard coded key from user preferences."); + memcpy(config.security.admin_key[2].bytes, userprefs_admin_key_2, 32); + config.security.admin_key[2].size = 32; + config.security.admin_key_count = numAdminKeys; + saveToDisk(SEGMENT_CONFIG); + } +#endif + state = loadProto(moduleConfigFileName, meshtastic_LocalModuleConfig_size, sizeof(meshtastic_LocalModuleConfig), &meshtastic_LocalModuleConfig_msg, &moduleConfig); if (state != LoadFileResult::LOAD_SUCCESS) { installDefaultModuleConfig(); // Our in RAM copy might now be corrupt } else { if (moduleConfig.version < DEVICESTATE_MIN_VER) { - LOG_WARN("moduleConfig %d is old, discarding", moduleConfig.version); + LOG_WARN("moduleConfig %d is old, discard", moduleConfig.version); installDefaultModuleConfig(); } else { LOG_INFO("Loaded saved moduleConfig version %d", moduleConfig.version); @@ -776,13 +1049,19 @@ void NodeDB::loadFromDisk() installDefaultChannels(); // Our in RAM copy might now be corrupt } else { if (channelFile.version < DEVICESTATE_MIN_VER) { - LOG_WARN("channelFile %d is old, discarding", channelFile.version); + LOG_WARN("channelFile %d is old, discard", channelFile.version); installDefaultChannels(); } else { LOG_INFO("Loaded saved channelFile version %d", channelFile.version); } } + state = loadProto(uiconfigFileName, meshtastic_DeviceUIConfig_size, sizeof(meshtastic_DeviceUIConfig), + &meshtastic_DeviceUIConfig_msg, &uiconfig); + if (state == LoadFileResult::LOAD_SUCCESS) { + LOG_INFO("Loaded UIConfig"); + } + // 2.4.X - configuration migration to update new default intervals if (moduleConfig.version < 23) { LOG_DEBUG("ModuleConfig version %d is stale, upgrading to new default intervals", moduleConfig.version); @@ -808,11 +1087,14 @@ void NodeDB::loadFromDisk() bool NodeDB::saveProto(const char *filename, size_t protoSize, const pb_msgdesc_t *fields, const void *dest_struct, bool fullAtomic) { +#ifdef ARCH_ESP32 + concurrency::LockGuard g(spiLock); +#endif bool okay = false; #ifdef FSCom auto f = SafeFile(filename, fullAtomic); - LOG_INFO("Saving %s", filename); + LOG_INFO("Save %s", filename); pb_ostream_t stream = {&writecb, static_cast(&f), protoSize}; if (!pb_encode(&stream, fields, dest_struct)) { @@ -905,7 +1187,7 @@ bool NodeDB::saveToDisk(int saveWhat) bool success = saveToDiskNoRetry(saveWhat); if (!success) { - LOG_ERROR("Failed to save to disk, retrying..."); + LOG_ERROR("Failed to save to disk, retrying"); #ifdef ARCH_NRF52 // @geeksville is not ready yet to say we should do this on other platforms. See bug #4184 discussion FSCom.format(); @@ -1046,7 +1328,6 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde return false; } - LOG_DEBUG("old user %s/%s, channel=%d", info->user.long_name, info->user.short_name, info->channel); #if !(MESHTASTIC_EXCLUDE_PKI) if (p.public_key.size > 0) { printBytes("Incoming Pubkey: ", p.public_key.bytes, 32); @@ -1055,7 +1336,7 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde // we copy the key into the incoming packet, to prevent overwrite memcpy(p.public_key.bytes, info->user.public_key.bytes, 32); } else { - LOG_INFO("Updating Node Pubkey!"); + LOG_INFO("Update Node Pubkey!"); } } #endif @@ -1070,7 +1351,8 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde } if (nodeId != getNodeNum()) info->channel = channelIndex; // Set channel we need to use to reach this node (but don't set our own channel) - LOG_DEBUG("updating changed=%d user %s/%s, channel=%d", changed, info->user.long_name, info->user.short_name, info->channel); + LOG_DEBUG("Update changed=%d user %s/%s, id=0x%08x, channel=%d", changed, info->user.long_name, info->user.short_name, nodeId, + info->channel); info->has_user = true; if (changed) { @@ -1078,10 +1360,14 @@ bool NodeDB::updateUser(uint32_t nodeId, meshtastic_User &p, uint8_t channelInde powerFSM.trigger(EVENT_NODEDB_UPDATED); notifyObservers(true); // Force an update whether or not our node counts have changed - // We just changed something about the user, store our DB - Throttle::execute( - &lastNodeDbSave, ONE_MINUTE_MS, []() { nodeDB->saveToDisk(SEGMENT_DEVICESTATE); }, - []() { LOG_DEBUG("Deferring NodeDB saveToDisk for now"); }); // since we saved less than a minute ago + // We just changed something about a User, + // store our DB unless we just did so less than a minute ago + if (!Throttle::isWithinTimespanMs(lastNodeDbSave, ONE_MINUTE_MS)) { + saveToDisk(SEGMENT_DEVICESTATE); + lastNodeDbSave = millis(); + } else { + LOG_DEBUG("Defer NodeDB saveToDisk for now"); + } } return changed; @@ -1135,16 +1421,20 @@ meshtastic_NodeInfoLite *NodeDB::getMeshNode(NodeNum n) return NULL; } +// returns true if the maximum number of nodes is reached or we are running low on memory +bool NodeDB::isFull() +{ + return (numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < MINIMUM_SAFE_FREE_HEAP); +} + /// Find a node in our DB, create an empty NodeInfo if missing meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n) { meshtastic_NodeInfoLite *lite = getMeshNode(n); if (!lite) { - if ((numMeshNodes >= MAX_NUM_NODES) || (memGet.getFreeHeap() < MINIMUM_SAFE_FREE_HEAP)) { - if (screen) - screen->print("Warn: node database full!\nErasing oldest entry\n"); - LOG_WARN("Node database full with %i nodes and %i bytes free! Erasing oldest entry", numMeshNodes, + if (isFull()) { + LOG_INFO("Node database full with %i nodes and %u bytes free. Erasing oldest entry", numMeshNodes, memGet.getFreeHeap()); // look for oldest node and erase it uint32_t oldest = UINT32_MAX; @@ -1153,12 +1443,12 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n) int oldestBoringIndex = -1; for (int i = 1; i < numMeshNodes; i++) { // Simply the oldest non-favorite node - if (!meshNodes->at(i).is_favorite && meshNodes->at(i).last_heard < oldest) { + if (!meshNodes->at(i).is_favorite && !meshNodes->at(i).is_ignored && meshNodes->at(i).last_heard < oldest) { oldest = meshNodes->at(i).last_heard; oldestIndex = i; } // The oldest "boring" node - if (!meshNodes->at(i).is_favorite && meshNodes->at(i).user.public_key.size == 0 && + if (!meshNodes->at(i).is_favorite && !meshNodes->at(i).is_ignored && meshNodes->at(i).user.public_key.size == 0 && meshNodes->at(i).last_heard < oldestBoring) { oldestBoring = meshNodes->at(i).last_heard; oldestBoringIndex = i; @@ -1168,11 +1458,14 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n) if (oldestBoringIndex != -1) { oldestIndex = oldestBoringIndex; } - // Shove the remaining nodes down the chain - for (int i = oldestIndex; i < numMeshNodes - 1; i++) { - meshNodes->at(i) = meshNodes->at(i + 1); + + if (oldestIndex != -1) { + // Shove the remaining nodes down the chain + for (int i = oldestIndex; i < numMeshNodes - 1; i++) { + meshNodes->at(i) = meshNodes->at(i + 1); + } + (numMeshNodes)--; } - (numMeshNodes)--; } // add the node at the end lite = &meshNodes->at((numMeshNodes)++); @@ -1180,12 +1473,19 @@ meshtastic_NodeInfoLite *NodeDB::getOrCreateMeshNode(NodeNum n) // everything is missing except the nodenum memset(lite, 0, sizeof(*lite)); lite->num = n; - LOG_INFO("Adding node to database with %i nodes and %i bytes free!", numMeshNodes, memGet.getFreeHeap()); + LOG_INFO("Adding node to database with %i nodes and %u bytes free!", numMeshNodes, memGet.getFreeHeap()); } return lite; } +/// Sometimes we will have Position objects that only have a time, so check for +/// valid lat/lon +bool NodeDB::hasValidPosition(const meshtastic_NodeInfoLite *n) +{ + return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0); +} + /// Record an error that should be reported via analytics void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, const char *filename) { @@ -1194,9 +1494,9 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co if (screen) screen->print(lcd.c_str()); if (filename) { - LOG_ERROR("NOTE! Recording critical error %d at %s:%lu", code, filename, address); + LOG_ERROR("NOTE! Record critical error %d at %s:%lu", code, filename, address); } else { - LOG_ERROR("NOTE! Recording critical error %d, address=0x%lx", code, address); + LOG_ERROR("NOTE! Record critical error %d, address=0x%lx", code, address); } // Record error to DB @@ -1205,7 +1505,7 @@ void recordCriticalError(meshtastic_CriticalErrorCode code, uint32_t address, co // Currently portuino is mostly used for simulation. Make sure the user notices something really bad happened #ifdef ARCH_PORTDUINO - LOG_ERROR("A critical failure occurred, portduino is exiting..."); + LOG_ERROR("A critical failure occurred, portduino is exiting"); exit(2); #endif } diff --git a/src/mesh/NodeDB.h b/src/mesh/NodeDB.h index eb33a2f6d..c8c0d3170 100644 --- a/src/mesh/NodeDB.h +++ b/src/mesh/NodeDB.h @@ -29,6 +29,7 @@ extern meshtastic_DeviceState devicestate; extern meshtastic_ChannelFile channelFile; extern meshtastic_MyNodeInfo &myNodeInfo; extern meshtastic_LocalConfig config; +extern meshtastic_DeviceUIConfig uiconfig; extern meshtastic_LocalModuleConfig moduleConfig; extern meshtastic_User &owner; extern meshtastic_Position localPosition; @@ -147,21 +148,26 @@ class NodeDB meshtastic_NodeInfoLite *getMeshNode(NodeNum n); size_t getNumMeshNodes() { return numMeshNodes; } + // returns true if the maximum number of nodes is reached or we are running low on memory + bool isFull(); + void clearLocalPosition(); void setLocalPosition(meshtastic_Position position, bool timeOnly = false) { if (timeOnly) { - LOG_DEBUG("Setting local position time only: time=%u timestamp=%u", position.time, position.timestamp); + LOG_DEBUG("Set local position time only: time=%u timestamp=%u", position.time, position.timestamp); localPosition.time = position.time; localPosition.timestamp = position.timestamp > 0 ? position.timestamp : position.time; return; } - LOG_DEBUG("Setting local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i, + LOG_DEBUG("Set local position: lat=%i lon=%i time=%u timestamp=%u", position.latitude_i, position.longitude_i, position.time, position.timestamp); localPosition = position; } + bool hasValidPosition(const meshtastic_NodeInfoLite *n); + private: uint32_t lastNodeDbSave = 0; // when we last saved our db to flash /// Find a node in our DB, create an empty NodeInfoLite if missing @@ -214,13 +220,6 @@ extern NodeDB *nodeDB; prefs.is_power_saving = True */ -/// Sometimes we will have Position objects that only have a time, so check for -/// valid lat/lon -static inline bool hasValidPosition(const meshtastic_NodeInfoLite *n) -{ - return n->has_position && (n->position.latitude_i != 0 || n->position.longitude_i != 0); -} - /** The current change # for radio settings. Starts at 0 on boot and any time the radio settings * might have changed is incremented. Allows others to detect they might now be on a new channel. */ diff --git a/src/mesh/PacketHistory.cpp b/src/mesh/PacketHistory.cpp index 8d49bce43..6eb4b6ea1 100644 --- a/src/mesh/PacketHistory.cpp +++ b/src/mesh/PacketHistory.cpp @@ -19,7 +19,7 @@ PacketHistory::PacketHistory() bool PacketHistory::wasSeenRecently(const meshtastic_MeshPacket *p, bool withUpdate) { if (p->id == 0) { - LOG_DEBUG("Ignoring message with zero id"); + LOG_DEBUG("Ignore message with zero id"); return false; // Not a floodable message ID, so we don't care } diff --git a/src/mesh/PhoneAPI.cpp b/src/mesh/PhoneAPI.cpp index 98db38c47..8c1ba74c7 100644 --- a/src/mesh/PhoneAPI.cpp +++ b/src/mesh/PhoneAPI.cpp @@ -57,14 +57,14 @@ void PhoneAPI::handleStartConfig() filesManifest = getFiles("/", 10); LOG_DEBUG("Got %d files in manifest", filesManifest.size()); - LOG_INFO("Starting API client config"); + LOG_INFO("Start API client config"); nodeInfoForPhone.num = 0; // Don't keep returning old nodeinfos resetReadIndex(); } void PhoneAPI::close() { - LOG_INFO("PhoneAPI::close()"); + LOG_DEBUG("PhoneAPI::close()"); if (state != STATE_SEND_NOTHING) { state = STATE_SEND_NOTHING; @@ -122,7 +122,7 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength) handleStartConfig(); break; case meshtastic_ToRadio_disconnect_tag: - LOG_INFO("Disconnecting from phone"); + LOG_INFO("Disconnect from phone"); close(); break; case meshtastic_ToRadio_xmodemPacket_tag: @@ -133,7 +133,7 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength) break; #if !MESHTASTIC_EXCLUDE_MQTT case meshtastic_ToRadio_mqttClientProxyMessage_tag: - LOG_INFO("Got MqttClientProxy message"); + LOG_DEBUG("Got MqttClientProxy message"); if (mqtt && moduleConfig.mqtt.proxy_to_client_enabled && moduleConfig.mqtt.enabled && (channels.anyMqttEnabled() || moduleConfig.mqtt.map_reporting_enabled)) { mqtt->onClientProxyReceive(toRadioScratch.mqttClientProxyMessage); @@ -148,11 +148,10 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength) break; default: // Ignore nop messages - // LOG_DEBUG("Error: unexpected ToRadio variant"); break; } } else { - LOG_ERROR("Error: ignoring malformed toradio"); + LOG_ERROR("Error: ignore malformed toradio"); } return false; @@ -165,6 +164,7 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength) * * Our sending states progress in the following sequence (the client apps ASSUME THIS SEQUENCE, DO NOT CHANGE IT): STATE_SEND_MY_INFO, // send our my info record + STATE_SEND_UIDATA, STATE_SEND_OWN_NODEINFO, STATE_SEND_METADATA, STATE_SEND_CHANNELS @@ -179,7 +179,6 @@ bool PhoneAPI::handleToRadio(const uint8_t *buf, size_t bufLength) size_t PhoneAPI::getFromRadio(uint8_t *buf) { if (!available()) { - // LOG_DEBUG("getFromRadio=not available"); return 0; } // In case we send a FromRadio packet @@ -188,22 +187,29 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) // Advance states as needed switch (state) { case STATE_SEND_NOTHING: - LOG_INFO("getFromRadio=STATE_SEND_NOTHING"); + LOG_DEBUG("FromRadio=STATE_SEND_NOTHING"); break; - case STATE_SEND_MY_INFO: - LOG_INFO("getFromRadio=STATE_SEND_MY_INFO"); + LOG_DEBUG("FromRadio=STATE_SEND_MY_INFO"); // If the user has specified they don't want our node to share its location, make sure to tell the phone // app not to send locations on our behalf. fromRadioScratch.which_payload_variant = meshtastic_FromRadio_my_info_tag; + strncpy(myNodeInfo.pio_env, optstr(APP_ENV), sizeof(myNodeInfo.pio_env)); fromRadioScratch.my_info = myNodeInfo; - state = STATE_SEND_OWN_NODEINFO; + state = STATE_SEND_UIDATA; service->refreshLocalMeshNode(); // Update my NodeInfo because the client will be asking for it soon. break; + case STATE_SEND_UIDATA: + LOG_INFO("getFromRadio=STATE_SEND_UIDATA"); + fromRadioScratch.which_payload_variant = meshtastic_FromRadio_deviceuiConfig_tag; + fromRadioScratch.deviceuiConfig = uiconfig; + state = STATE_SEND_OWN_NODEINFO; + break; + case STATE_SEND_OWN_NODEINFO: { - LOG_INFO("getFromRadio=STATE_SEND_OWN_NODEINFO"); + LOG_DEBUG("Send My NodeInfo"); auto us = nodeDB->readNextMeshNode(readIndex); if (us) { nodeInfoForPhone = TypeConversions::ConvertToNodeInfo(us); @@ -219,64 +225,75 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) } case STATE_SEND_METADATA: - LOG_INFO("getFromRadio=STATE_SEND_METADATA"); + LOG_DEBUG("Send device metadata"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_metadata_tag; fromRadioScratch.metadata = getDeviceMetadata(); state = STATE_SEND_CHANNELS; break; case STATE_SEND_CHANNELS: - LOG_INFO("getFromRadio=STATE_SEND_CHANNELS"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_channel_tag; fromRadioScratch.channel = channels.getByIndex(config_state); config_state++; // Advance when we have sent all of our Channels if (config_state >= MAX_NUM_CHANNELS) { + LOG_DEBUG("Send channels %d", config_state); state = STATE_SEND_CONFIG; config_state = _meshtastic_AdminMessage_ConfigType_MIN + 1; } break; case STATE_SEND_CONFIG: - LOG_INFO("getFromRadio=STATE_SEND_CONFIG"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_config_tag; switch (config_state) { case meshtastic_Config_device_tag: + LOG_DEBUG("Send config: device"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_device_tag; fromRadioScratch.config.payload_variant.device = config.device; break; case meshtastic_Config_position_tag: + LOG_DEBUG("Send config: position"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_position_tag; fromRadioScratch.config.payload_variant.position = config.position; break; case meshtastic_Config_power_tag: + LOG_DEBUG("Send config: power"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_power_tag; fromRadioScratch.config.payload_variant.power = config.power; fromRadioScratch.config.payload_variant.power.ls_secs = default_ls_secs; break; case meshtastic_Config_network_tag: + LOG_DEBUG("Send config: network"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_network_tag; fromRadioScratch.config.payload_variant.network = config.network; break; case meshtastic_Config_display_tag: + LOG_DEBUG("Send config: display"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_display_tag; fromRadioScratch.config.payload_variant.display = config.display; break; case meshtastic_Config_lora_tag: + LOG_DEBUG("Send config: lora"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_lora_tag; fromRadioScratch.config.payload_variant.lora = config.lora; break; case meshtastic_Config_bluetooth_tag: + LOG_DEBUG("Send config: bluetooth"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_bluetooth_tag; fromRadioScratch.config.payload_variant.bluetooth = config.bluetooth; break; case meshtastic_Config_security_tag: + LOG_DEBUG("Send config: security"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_security_tag; fromRadioScratch.config.payload_variant.security = config.security; break; case meshtastic_Config_sessionkey_tag: + LOG_DEBUG("Send config: sessionkey"); fromRadioScratch.config.which_payload_variant = meshtastic_Config_sessionkey_tag; break; + case meshtastic_Config_device_ui_tag: // NOOP! + fromRadioScratch.config.which_payload_variant = meshtastic_Config_device_ui_tag; + break; default: LOG_ERROR("Unknown config type %d", config_state); } @@ -293,58 +310,70 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) break; case STATE_SEND_MODULECONFIG: - LOG_INFO("getFromRadio=STATE_SEND_MODULECONFIG"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_moduleConfig_tag; switch (config_state) { case meshtastic_ModuleConfig_mqtt_tag: + LOG_DEBUG("Send module config: mqtt"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_mqtt_tag; fromRadioScratch.moduleConfig.payload_variant.mqtt = moduleConfig.mqtt; break; case meshtastic_ModuleConfig_serial_tag: + LOG_DEBUG("Send module config: serial"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_serial_tag; fromRadioScratch.moduleConfig.payload_variant.serial = moduleConfig.serial; break; case meshtastic_ModuleConfig_external_notification_tag: + LOG_DEBUG("Send module config: ext notification"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_external_notification_tag; fromRadioScratch.moduleConfig.payload_variant.external_notification = moduleConfig.external_notification; break; case meshtastic_ModuleConfig_store_forward_tag: + LOG_DEBUG("Send module config: store forward"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_store_forward_tag; fromRadioScratch.moduleConfig.payload_variant.store_forward = moduleConfig.store_forward; break; case meshtastic_ModuleConfig_range_test_tag: + LOG_DEBUG("Send module config: range test"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_range_test_tag; fromRadioScratch.moduleConfig.payload_variant.range_test = moduleConfig.range_test; break; case meshtastic_ModuleConfig_telemetry_tag: + LOG_DEBUG("Send module config: telemetry"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_telemetry_tag; fromRadioScratch.moduleConfig.payload_variant.telemetry = moduleConfig.telemetry; break; case meshtastic_ModuleConfig_canned_message_tag: + LOG_DEBUG("Send module config: canned message"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_canned_message_tag; fromRadioScratch.moduleConfig.payload_variant.canned_message = moduleConfig.canned_message; break; case meshtastic_ModuleConfig_audio_tag: + LOG_DEBUG("Send module config: audio"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_audio_tag; fromRadioScratch.moduleConfig.payload_variant.audio = moduleConfig.audio; break; case meshtastic_ModuleConfig_remote_hardware_tag: + LOG_DEBUG("Send module config: remote hardware"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_remote_hardware_tag; fromRadioScratch.moduleConfig.payload_variant.remote_hardware = moduleConfig.remote_hardware; break; case meshtastic_ModuleConfig_neighbor_info_tag: + LOG_DEBUG("Send module config: neighbor info"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_neighbor_info_tag; fromRadioScratch.moduleConfig.payload_variant.neighbor_info = moduleConfig.neighbor_info; break; case meshtastic_ModuleConfig_detection_sensor_tag: + LOG_DEBUG("Send module config: detection sensor"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_detection_sensor_tag; fromRadioScratch.moduleConfig.payload_variant.detection_sensor = moduleConfig.detection_sensor; break; case meshtastic_ModuleConfig_ambient_lighting_tag: + LOG_DEBUG("Send module config: ambient lighting"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_ambient_lighting_tag; fromRadioScratch.moduleConfig.payload_variant.ambient_lighting = moduleConfig.ambient_lighting; break; case meshtastic_ModuleConfig_paxcounter_tag: + LOG_DEBUG("Send module config: paxcounter"); fromRadioScratch.moduleConfig.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag; fromRadioScratch.moduleConfig.payload_variant.paxcounter = moduleConfig.paxcounter; break; @@ -362,7 +391,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) break; case STATE_SEND_OTHER_NODEINFOS: { - LOG_INFO("getFromRadio=STATE_SEND_OTHER_NODEINFOS"); + LOG_DEBUG("Send known nodes"); if (nodeInfoForPhone.num != 0) { LOG_INFO("nodeinfo: num=0x%x, lastseen=%u, id=%s, name=%s", nodeInfoForPhone.num, nodeInfoForPhone.last_heard, nodeInfoForPhone.user.id, nodeInfoForPhone.user.long_name); @@ -371,7 +400,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) // Stay in current state until done sending nodeinfos nodeInfoForPhone.num = 0; // We just consumed a nodeinfo, will need a new one next time } else { - LOG_INFO("Done sending nodeinfos"); + LOG_DEBUG("Done sending nodeinfo"); state = STATE_SEND_FILEMANIFEST; // Go ahead and send that ID right now return getFromRadio(buf); @@ -380,7 +409,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) } case STATE_SEND_FILEMANIFEST: { - LOG_INFO("getFromRadio=STATE_SEND_FILEMANIFEST"); + LOG_DEBUG("FromRadio=STATE_SEND_FILEMANIFEST"); // last element if (config_state == filesManifest.size()) { // also handles an empty filesManifest config_state = 0; @@ -403,7 +432,7 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) case STATE_SEND_PACKETS: pauseBluetoothLogging = false; // Do we have a message from the mesh or packet from the local device? - LOG_INFO("getFromRadio=STATE_SEND_PACKETS"); + LOG_DEBUG("FromRadio=STATE_SEND_PACKETS"); if (queueStatusPacketForPhone) { fromRadioScratch.which_payload_variant = meshtastic_FromRadio_queueStatus_tag; fromRadioScratch.queueStatus = *queueStatusPacketForPhone; @@ -441,17 +470,16 @@ size_t PhoneAPI::getFromRadio(uint8_t *buf) // VERY IMPORTANT to not print debug messages while writing to fromRadioScratch - because we use that same buffer // for logging (when we are encapsulating with protobufs) - // LOG_DEBUG("encoding toPhone packet to phone variant=%d, %d bytes", fromRadioScratch.which_payload_variant, numbytes); return numbytes; } - LOG_DEBUG("no FromRadio packet available"); + LOG_DEBUG("No FromRadio packet available"); return 0; } void PhoneAPI::sendConfigComplete() { - LOG_INFO("getFromRadio=STATE_SEND_COMPLETE_ID"); + LOG_INFO("Config Send Complete"); fromRadioScratch.which_payload_variant = meshtastic_FromRadio_config_complete_id_tag; fromRadioScratch.config_complete_id = config_nonce; config_nonce = 0; @@ -500,6 +528,7 @@ bool PhoneAPI::available() case STATE_SEND_NOTHING: return false; case STATE_SEND_MY_INFO: + case STATE_SEND_UIDATA: case STATE_SEND_CHANNELS: case STATE_SEND_CONFIG: case STATE_SEND_MODULECONFIG: @@ -551,7 +580,6 @@ bool PhoneAPI::available() if (!packetForPhone) packetForPhone = service->getForPhone(); hasPacket = !!packetForPhone; - // LOG_DEBUG("available hasPacket=%d", hasPacket); return hasPacket; } default: @@ -596,21 +624,25 @@ bool PhoneAPI::handleToRadioPacket(meshtastic_MeshPacket &p) { printPacket("PACKET FROM PHONE", &p); - if (p.id > 0 && wasSeenRecently(p.id)) { - LOG_DEBUG("Ignoring packet from phone, already seen recently"); - return false; - } +#if defined(ARCH_PORTDUINO) + // For use with the simulator, we should not ignore duplicate packets from the phone + if (SimRadio::instance == nullptr) +#endif + if (p.id > 0 && wasSeenRecently(p.id)) { + LOG_DEBUG("Ignore packet from phone, already seen recently"); + return false; + } if (p.decoded.portnum == meshtastic_PortNum_TRACEROUTE_APP && lastPortNumToRadio[p.decoded.portnum] && Throttle::isWithinTimespanMs(lastPortNumToRadio[p.decoded.portnum], THIRTY_SECONDS_MS)) { - LOG_WARN("Rate limiting portnum %d", p.decoded.portnum); + LOG_WARN("Rate limit portnum %d", p.decoded.portnum); sendNotification(meshtastic_LogRecord_Level_WARNING, p.id, "TraceRoute can only be sent once every 30 seconds"); meshtastic_QueueStatus qs = router->getQueueStatus(); service->sendQueueStatusToPhone(qs, 0, p.id); return false; } else if (p.decoded.portnum == meshtastic_PortNum_POSITION_APP && lastPortNumToRadio[p.decoded.portnum] && Throttle::isWithinTimespanMs(lastPortNumToRadio[p.decoded.portnum], FIVE_SECONDS_MS)) { - LOG_WARN("Rate limiting portnum %d", p.decoded.portnum); + LOG_WARN("Rate limit portnum %d", p.decoded.portnum); meshtastic_QueueStatus qs = router->getQueueStatus(); service->sendQueueStatusToPhone(qs, 0, p.id); // FIXME: Figure out why this continues to happen @@ -629,11 +661,11 @@ int PhoneAPI::onNotify(uint32_t newValue) // doesn't call this from idle) if (state == STATE_SEND_PACKETS) { - LOG_INFO("Telling client we have new packets %u", newValue); + LOG_INFO("Tell client we have new packets %u", newValue); onNowHasData(newValue); } else { LOG_DEBUG("(Client not yet interested in packets)"); } return timeout ? -1 : 0; // If we timed out, MeshService should stop iterating through observers as we just removed one -} \ No newline at end of file +} diff --git a/src/mesh/PhoneAPI.h b/src/mesh/PhoneAPI.h index 3247fee5c..681b244c8 100644 --- a/src/mesh/PhoneAPI.h +++ b/src/mesh/PhoneAPI.h @@ -34,6 +34,7 @@ class PhoneAPI { enum State { STATE_SEND_NOTHING, // Initial state, don't send anything until the client starts asking for config + STATE_SEND_UIDATA, // send stored data for device-ui STATE_SEND_MY_INFO, // send our my info record STATE_SEND_OWN_NODEINFO, STATE_SEND_METADATA, @@ -148,6 +149,9 @@ class PhoneAPI */ virtual void onNowHasData(uint32_t fromRadioNum) {} + /// begin a new connection + void handleStartConfig(); + private: void releasePhonePacket(); @@ -157,9 +161,6 @@ class PhoneAPI void releaseClientNotification(); - /// begin a new connection - void handleStartConfig(); - bool wasSeenRecently(uint32_t packetId); /** @@ -170,4 +171,4 @@ class PhoneAPI /// If the mesh service tells us fromNum has changed, tell the phone virtual int onNotify(uint32_t newValue) override; -}; \ No newline at end of file +}; diff --git a/src/mesh/ProtobufModule.h b/src/mesh/ProtobufModule.h index 4ddac9a0d..e038e9bb8 100644 --- a/src/mesh/ProtobufModule.h +++ b/src/mesh/ProtobufModule.h @@ -91,7 +91,7 @@ template class ProtobufModule : protected SinglePortModule if (pb_decode_from_bytes(p.payload.bytes, p.payload.size, fields, &scratch)) { decoded = &scratch; } else { - LOG_ERROR("Error decoding protobuf module!"); + LOG_ERROR("Error decoding proto module!"); // if we can't decode it, nobody can process it! return ProcessMessage::STOP; } @@ -112,7 +112,7 @@ template class ProtobufModule : protected SinglePortModule if (pb_decode_from_bytes(p.payload.bytes, p.payload.size, fields, &scratch)) { decoded = &scratch; } else { - LOG_ERROR("Error decoding protobuf module!"); + LOG_ERROR("Error decoding proto module!"); // if we can't decode it, nobody can process it! return; } diff --git a/src/mesh/RF95Interface.cpp b/src/mesh/RF95Interface.cpp index db56659bd..9ef045099 100644 --- a/src/mesh/RF95Interface.cpp +++ b/src/mesh/RF95Interface.cpp @@ -230,7 +230,7 @@ bool RF95Interface::reconfigure() err = lora->setPreambleLength(preambleLength); if (err != RADIOLIB_ERR_NONE) - LOG_ERROR(" RF95 setPreambleLength %s%d", radioLibErr, err); + LOG_ERROR("RF95 setPreambleLength %s%d", radioLibErr, err); assert(err == RADIOLIB_ERR_NONE); err = lora->setFrequency(getFreq()); diff --git a/src/mesh/RadioInterface.cpp b/src/mesh/RadioInterface.cpp index f51c9bcb9..b1403f3b6 100644 --- a/src/mesh/RadioInterface.cpp +++ b/src/mesh/RadioInterface.cpp @@ -140,7 +140,7 @@ const RegionInfo regions[] = { Philippines 433 - 434.7 MHz <10 mW erp, NTC approved device required 868 - 869.4 MHz <25 mW erp, NTC approved device required - 915 - 918 MHz <250 mW EIRP, no external antennna allowed + 915 - 918 MHz <250 mW EIRP, no external antenna allowed https://github.com/meshtastic/firmware/issues/4948#issuecomment-2394926135 */ @@ -254,8 +254,8 @@ uint32_t RadioInterface::getTxDelayMsec() return random(0, pow(2, CWsize)) * slotTimeMsec; } -/** The delay to use when we want to flood a message */ -uint32_t RadioInterface::getTxDelayMsecWeighted(float snr) +/** The CW size to use when calculating SNR_based delays */ +uint8_t RadioInterface::getCWsize(float snr) { // The minimum value for a LoRa SNR const uint32_t SNR_MIN = -20; @@ -263,15 +263,29 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr) // The maximum value for a LoRa SNR const uint32_t SNR_MAX = 15; + return map(snr, SNR_MIN, SNR_MAX, CWmin, CWmax); +} + +/** The worst-case SNR_based packet delay */ +uint32_t RadioInterface::getTxDelayMsecWeightedWorst(float snr) +{ + uint8_t CWsize = getCWsize(snr); + // offset the maximum delay for routers: (2 * CWmax * slotTimeMsec) + return (2 * CWmax * slotTimeMsec) + pow(2, CWsize) * slotTimeMsec; +} + +/** The delay to use when we want to flood a message */ +uint32_t RadioInterface::getTxDelayMsecWeighted(float snr) +{ // high SNR = large CW size (Long Delay) // low SNR = small CW size (Short Delay) uint32_t delay = 0; - uint8_t CWsize = map(snr, SNR_MIN, SNR_MAX, CWmin, CWmax); + uint8_t CWsize = getCWsize(snr); // LOG_DEBUG("rx_snr of %f so setting CWsize to:%d", snr, CWsize); if (config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER || config.device.role == meshtastic_Config_DeviceConfig_Role_REPEATER) { delay = random(0, 2 * CWsize) * slotTimeMsec; - LOG_DEBUG("rx_snr found in packet. As a router, setting tx delay:%d", delay); + LOG_DEBUG("rx_snr found in packet. Router: setting tx delay:%d", delay); } else { // offset the maximum delay for routers: (2 * CWmax * slotTimeMsec) delay = (2 * CWmax * slotTimeMsec) + random(0, pow(2, CWsize)) * slotTimeMsec; @@ -284,8 +298,8 @@ uint32_t RadioInterface::getTxDelayMsecWeighted(float snr) void printPacket(const char *prefix, const meshtastic_MeshPacket *p) { #ifdef DEBUG_PORT - std::string out = DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%02x to=0x%02x, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id, - p->from & 0xff, p->to & 0xff, p->want_ack, p->hop_limit, p->channel); + std::string out = DEBUG_PORT.mt_sprintf("%s (id=0x%08x fr=0x%08x to=0x%08x, WantAck=%d, HopLim=%d Ch=0x%x", prefix, p->id, + p->from, p->to, p->want_ack, p->hop_limit, p->channel); if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) { auto &s = p->decoded; @@ -313,6 +327,7 @@ void printPacket(const char *prefix, const meshtastic_MeshPacket *p) out += DEBUG_PORT.mt_sprintf(" failId=%08x", s.ackVariant.fail_id); */ } else { out += " encrypted"; + out += DEBUG_PORT.mt_sprintf(" len=%d", p->encrypted.size + sizeof(PacketHeader)); } if (p->rx_time != 0) @@ -346,7 +361,7 @@ bool RadioInterface::reconfigure() bool RadioInterface::init() { - LOG_INFO("Starting meshradio init..."); + LOG_INFO("Start meshradio init"); configChangedObserver.observe(&service->configChanged); preflightSleepObserver.observe(&preflightSleep); @@ -494,7 +509,7 @@ void RadioInterface::applyModemConfig() } if ((myRegion->freqEnd - myRegion->freqStart) < bw / 1000) { - static const char *err_string = "Regional frequency range is smaller than bandwidth. Falling back to default preset."; + static const char *err_string = "Regional frequency range is smaller than bandwidth. Fall back to default preset"; LOG_ERROR(err_string); RECORD_CRITICALERROR(meshtastic_CriticalErrorCode_INVALID_RADIO_SETTING); @@ -578,7 +593,7 @@ void RadioInterface::limitPower() maxPower = myRegion->powerLimit; if ((power > maxPower) && !devicestate.owner.is_licensed) { - LOG_INFO("Lowering transmit power because of regulatory limits"); + LOG_INFO("Lower transmit power because of regulatory limits"); power = maxPower; } @@ -598,11 +613,9 @@ size_t RadioInterface::beginSending(meshtastic_MeshPacket *p) { assert(!sendingPacket); - // LOG_DEBUG("sending queued packet on mesh (txGood=%d,rxGood=%d,rxBad=%d)", rf95.txGood(), rf95.rxGood(), rf95.rxBad()); + // LOG_DEBUG("Send queued packet on mesh (txGood=%d,rxGood=%d,rxBad=%d)", rf95.txGood(), rf95.rxGood(), rf95.rxBad()); assert(p->which_payload_variant == meshtastic_MeshPacket_encrypted_tag); // It should have already been encoded by now - lastTxStart = millis(); - radioBuffer.header.from = p->from; radioBuffer.header.to = p->to; radioBuffer.header.id = p->id; diff --git a/src/mesh/RadioInterface.h b/src/mesh/RadioInterface.h index 89a4c7087..652b2269c 100644 --- a/src/mesh/RadioInterface.h +++ b/src/mesh/RadioInterface.h @@ -173,9 +173,18 @@ class RadioInterface /** The delay to use when we want to send something */ uint32_t getTxDelayMsec(); + /** The CW to use when calculating SNR_based delays */ + uint8_t getCWsize(float snr); + + /** The worst-case SNR_based packet delay */ + uint32_t getTxDelayMsecWeightedWorst(float snr); + /** The delay to use when we want to flood a message. Use a weighted scale based on SNR */ uint32_t getTxDelayMsecWeighted(float snr); + /** If the packet is not already in the late rebroadcast window, move it there */ + virtual void clampToLateRebroadcastWindow(NodeNum from, PacketId id) { return; } + /** * Calculate airtime per * https://www.rs-online.com/designspark/rel-assets/ds-assets/uploads/knowledge-items/application-notes-for-the-internet-of-things/LoRa%20Design%20Guide.pdf diff --git a/src/mesh/RadioLibInterface.cpp b/src/mesh/RadioLibInterface.cpp index 1ec3b9077..997b1d6fe 100644 --- a/src/mesh/RadioLibInterface.cpp +++ b/src/mesh/RadioLibInterface.cpp @@ -11,6 +11,10 @@ #include #include +#if ARCH_PORTDUINO +#include "PortduinoGlue.h" +#include "meshUtils.h" +#endif void LockingArduinoHal::spiBeginTransaction() { spiLock->lock(); @@ -20,38 +24,14 @@ void LockingArduinoHal::spiBeginTransaction() void LockingArduinoHal::spiEndTransaction() { - spiLock->unlock(); - ArduinoHal::spiEndTransaction(); + + spiLock->unlock(); } #if ARCH_PORTDUINO void LockingArduinoHal::spiTransfer(uint8_t *out, size_t len, uint8_t *in) { - if (busy == RADIOLIB_NC) { - spi->transfer(out, in, len); - } else { - uint16_t offset = 0; - - while (len) { - uint8_t block_size = (len < 20 ? len : 20); - spi->transfer((out != NULL ? out + offset : NULL), (in != NULL ? in + offset : NULL), block_size); - if (block_size == len) - return; - - // ensure GPIO is low - - uint32_t start = millis(); - while (digitalRead(busy)) { - if (!Throttle::isWithinTimespanMs(start, 2000)) { - LOG_ERROR("GPIO mid-transfer timeout, is it connected?"); - return; - } - } - - offset += block_size; - len -= block_size; - } - } + spi->transfer(out, in, len); } #endif @@ -139,12 +119,12 @@ bool RadioLibInterface::receiveDetected(uint16_t irq, ulong syncWordHeaderValidF } else if (!Throttle::isWithinTimespanMs(activeReceiveStart, 2 * preambleTimeMsec) && !(irq & syncWordHeaderValidFlag)) { // The HEADER_VALID flag should be set by now if it was really a packet, so ignore PREAMBLE_DETECTED flag activeReceiveStart = 0; - LOG_DEBUG("Ignore false preamble detection."); + LOG_DEBUG("Ignore false preamble detection"); return false; } else if (!Throttle::isWithinTimespanMs(activeReceiveStart, maxPacketTimeMsec)) { // We should have gotten an RX_DONE IRQ by now if it was really a packet, so ignore HEADER_VALID flag activeReceiveStart = 0; - LOG_DEBUG("Ignore false header detection."); + LOG_DEBUG("Ignore false header detection"); return false; } } @@ -167,7 +147,7 @@ ErrorCode RadioLibInterface::send(meshtastic_MeshPacket *p) } } else { - LOG_WARN("send - lora tx disabled because RegionCode_Unset"); + LOG_WARN("send - lora tx disabled: Region unset"); packetPool.release(p); return ERRNO_DISABLED; } @@ -182,9 +162,14 @@ ErrorCode RadioLibInterface::send(meshtastic_MeshPacket *p) #endif + if (p->to == NODENUM_BROADCAST_NO_LORA) { + LOG_DEBUG("Drop no-LoRa pkt"); + return ERRNO_SHOULD_RELEASE; + } + // Sometimes when testing it is useful to be able to never turn on the xmitter #ifndef LORA_DISABLE_SENDING - printPacket("enqueuing for send", p); + printPacket("enqueue for send", p); LOG_DEBUG("txGood=%d,txRelay=%d,rxGood=%d,rxBad=%d", txGood, txRelay, rxGood, rxBad); ErrorCode res = txQueue.enqueue(p) ? ERRNO_OK : ERRNO_UNKNOWN; @@ -196,7 +181,6 @@ ErrorCode RadioLibInterface::send(meshtastic_MeshPacket *p) // set (random) transmit delay to let others reconfigure their radio, // to avoid collisions and implement timing-based flooding - // LOG_DEBUG("Set random delay before transmitting."); setTransmitDelay(); return res; @@ -221,7 +205,7 @@ bool RadioLibInterface::canSleep() { bool res = txQueue.empty(); if (!res) { // only print debug messages if we are vetoing sleep - LOG_DEBUG("radio wait to sleep, txEmpty=%d", res); + LOG_DEBUG("Radio wait to sleep, txEmpty=%d", res); } return res; } @@ -251,42 +235,47 @@ void RadioLibInterface::onNotify(uint32_t notification) case ISR_TX: handleTransmitInterrupt(); startReceive(); - // LOG_DEBUG("tx complete - starting timer"); - startTransmitTimer(); + setTransmitDelay(); break; case ISR_RX: handleReceiveInterrupt(); startReceive(); - // LOG_DEBUG("rx complete - starting timer"); - startTransmitTimer(); + setTransmitDelay(); break; case TRANSMIT_DELAY_COMPLETED: - // LOG_DEBUG("delay done"); // If we are not currently in receive mode, then restart the random delay (this can happen if the main thread // has placed the unit into standby) FIXME, how will this work if the chipset is in sleep mode? if (!txQueue.empty()) { if (!canSendImmediately()) { - // LOG_DEBUG("Currently Rx/Tx-ing: set random delay"); setTransmitDelay(); // currently Rx/Tx-ing: reset random delay } else { - if (isChannelActive()) { // check if there is currently a LoRa packet on the channel - // LOG_DEBUG("Channel is active, try receiving first."); - startReceive(); // try receiving this packet, afterwards we'll be trying to transmit again - setTransmitDelay(); + meshtastic_MeshPacket *txp = txQueue.getFront(); + assert(txp); + long delay_remaining = txp->tx_after ? txp->tx_after - millis() : 0; + if (delay_remaining > 0) { + // There's still some delay pending on this packet, so resume waiting for it to elapse + notifyLater(delay_remaining, TRANSMIT_DELAY_COMPLETED, false); } else { - // Send any outgoing packets we have ready - meshtastic_MeshPacket *txp = txQueue.dequeue(); - assert(txp); - startSend(txp); - - // Packet has been sent, count it toward our TX airtime utilization. - uint32_t xmitMsec = getPacketTime(txp); - airTime->logAirtime(TX_LOG, xmitMsec); + if (isChannelActive()) { // check if there is currently a LoRa packet on the channel + startReceive(); // try receiving this packet, afterwards we'll be trying to transmit again + setTransmitDelay(); + } else { + // Send any outgoing packets we have ready as fast as possible to keep the time between channel scan and + // actual transmission as short as possible + txp = txQueue.dequeue(); + assert(txp); + bool sent = startSend(txp); + if (sent) { + // Packet has been sent, count it toward our TX airtime utilization. + uint32_t xmitMsec = getPacketTime(txp); + airTime->logAirtime(TX_LOG, xmitMsec); + } + } } } } else { - // LOG_DEBUG("done with txqueue"); + // Do nothing, because the queue is empty } break; default: @@ -297,15 +286,24 @@ void RadioLibInterface::onNotify(uint32_t notification) void RadioLibInterface::setTransmitDelay() { meshtastic_MeshPacket *p = txQueue.getFront(); + if (!p) { + return; // noop if there's nothing in the queue + } + // We want all sending/receiving to be done by our daemon thread. // We use a delay here because this packet might have been sent in response to a packet we just received. // So we want to make sure the other side has had a chance to reconfigure its radio. - /* We assume if rx_snr = 0 and rx_rssi = 0, the packet was generated locally. - * This assumption is valid because of the offset generated by the radio to account for the noise - * floor. - */ - if (p->rx_snr == 0 && p->rx_rssi == 0) { + if (p->tx_after) { + unsigned long add_delay = p->rx_rssi ? getTxDelayMsecWeighted(p->rx_snr) : getTxDelayMsec(); + unsigned long now = millis(); + p->tx_after = max(p->tx_after + add_delay, now + add_delay); + notifyLater(now - p->tx_after, TRANSMIT_DELAY_COMPLETED, false); + } else if (p->rx_snr == 0 && p->rx_rssi == 0) { + /* We assume if rx_snr = 0 and rx_rssi = 0, the packet was generated locally. + * This assumption is valid because of the offset generated by the radio to account for the noise + * floor. + */ startTransmitTimer(true); } else { // If there is a SNR, start a timer scaled based on that SNR. @@ -319,7 +317,6 @@ void RadioLibInterface::startTransmitTimer(bool withDelay) // If we have work to do and the timer wasn't already scheduled, schedule it now if (!txQueue.empty()) { uint32_t delay = !withDelay ? 1 : getTxDelayMsec(); - // LOG_DEBUG("xmit timer %d", delay); notifyLater(delay, TRANSMIT_DELAY_COMPLETED, false); // This will implicitly enable } } @@ -329,19 +326,31 @@ void RadioLibInterface::startTransmitTimerSNR(float snr) // If we have work to do and the timer wasn't already scheduled, schedule it now if (!txQueue.empty()) { uint32_t delay = getTxDelayMsecWeighted(snr); - // LOG_DEBUG("xmit timer %d", delay); notifyLater(delay, TRANSMIT_DELAY_COMPLETED, false); // This will implicitly enable } } +/** + * If the packet is not already in the late rebroadcast window, move it there + */ +void RadioLibInterface::clampToLateRebroadcastWindow(NodeNum from, PacketId id) +{ + // Look for non-late packets only, so we don't do this twice! + meshtastic_MeshPacket *p = txQueue.remove(from, id, true, false); + if (p) { + p->tx_after = millis() + getTxDelayMsecWeightedWorst(p->rx_snr); + txQueue.enqueue(p); + LOG_DEBUG("Move existing queued packet to the late rebroadcast window %dms from now", p->tx_after - millis()); + } +} + void RadioLibInterface::handleTransmitInterrupt() { - // LOG_DEBUG("handling lora TX interrupt"); // This can be null if we forced the device to enter standby mode. In that case // ignore the transmit interrupt if (sendingPacket) completeSending(); - powerMon->clearState(meshtastic_PowerMon_State_Lora_TXOn); // But our transmitter is deffinitely off now + powerMon->clearState(meshtastic_PowerMon_State_Lora_TXOn); // But our transmitter is definitely off now } void RadioLibInterface::completeSending() @@ -359,7 +368,6 @@ void RadioLibInterface::completeSending() // We are done sending that packet, release it packetPool.release(p); - // LOG_DEBUG("Done with send"); } } @@ -370,7 +378,7 @@ void RadioLibInterface::handleReceiveInterrupt() // when this is called, we should be in receive mode - if we are not, just jump out instead of bombing. Possible Race // Condition? if (!isReceiving) { - LOG_ERROR("handleReceiveInterrupt called when not in receive mode, which shouldn't happen."); + LOG_ERROR("handleReceiveInterrupt called when not in rx mode, which shouldn't happen"); return; } @@ -383,15 +391,20 @@ void RadioLibInterface::handleReceiveInterrupt() #ifndef DISABLE_WELCOME_UNSET if (config.lora.region == meshtastic_Config_LoRaConfig_RegionCode_UNSET) { - LOG_WARN("recv - lora rx disabled because RegionCode_Unset"); + LOG_WARN("lora rx disabled: Region unset"); airTime->logAirtime(RX_ALL_LOG, xmitMsec); return; } #endif int state = iface->readData((uint8_t *)&radioBuffer, length); +#if ARCH_PORTDUINO + if (settingsMap[logoutputlevel] == level_trace) { + printBytes("Raw incoming packet: ", (uint8_t *)&radioBuffer, length); + } +#endif if (state != RADIOLIB_ERR_NONE) { - LOG_ERROR("ignoring received packet due to error=%d", state); + LOG_ERROR("Ignore received packet due to error=%d", state); rxBad++; airTime->logAirtime(RX_ALL_LOG, xmitMsec); @@ -402,14 +415,14 @@ void RadioLibInterface::handleReceiveInterrupt() // check for short packets if (payloadLen < 0) { - LOG_WARN("ignoring received packet too short"); + LOG_WARN("Ignore received packet too short"); rxBad++; airTime->logAirtime(RX_ALL_LOG, xmitMsec); } else { rxGood++; // altered packet with "from == 0" can do Remote Node Administration without permission if (radioBuffer.header.from == 0) { - LOG_WARN("ignoring received packet without sender"); + LOG_WARN("Ignore received packet without sender"); return; } @@ -464,12 +477,14 @@ void RadioLibInterface::setStandby() } /** start an immediate transmit */ -void RadioLibInterface::startSend(meshtastic_MeshPacket *txp) +bool RadioLibInterface::startSend(meshtastic_MeshPacket *txp) { - printPacket("Starting low level send", txp); + /* NOTE: Minimize the actions before startTransmit() to keep the time between + channel scan and actual transmit as low as possible to avoid collisions. */ if (disabled || !config.lora.tx_enabled) { LOG_WARN("Drop Tx packet because LoRa Tx disabled"); packetPool.release(txp); + return false; } else { configHardwareForSend(); // must be after setStandby @@ -484,10 +499,15 @@ void RadioLibInterface::startSend(meshtastic_MeshPacket *txp) completeSending(); powerMon->clearState(meshtastic_PowerMon_State_Lora_TXOn); // Transmitter off now startReceive(); // Restart receive mode (because startTransmit failed to put us in xmit mode) + } else { + lastTxStart = millis(); + printPacket("Started Tx", txp); } // Must be done AFTER, starting transmit, because startTransmit clears (possibly stale) interrupt pending register // bits enableInterrupt(isrTxLevel0); + + return res == RADIOLIB_ERR_NONE; } } \ No newline at end of file diff --git a/src/mesh/RadioLibInterface.h b/src/mesh/RadioLibInterface.h index 353176a5b..dff58c9ad 100644 --- a/src/mesh/RadioLibInterface.h +++ b/src/mesh/RadioLibInterface.h @@ -5,6 +5,7 @@ #include "concurrency/NotifiedWorkerThread.h" #include +#include // ESP32 has special rules about ISR code #ifdef ARDUINO_ARCH_ESP32 @@ -21,18 +22,11 @@ class LockingArduinoHal : public ArduinoHal { public: - LockingArduinoHal(SPIClass &spi, SPISettings spiSettings, RADIOLIB_PIN_TYPE _busy = RADIOLIB_NC) - : ArduinoHal(spi, spiSettings) - { -#if ARCH_PORTDUINO - busy = _busy; -#endif - }; + LockingArduinoHal(SPIClass &spi, SPISettings spiSettings) : ArduinoHal(spi, spiSettings){}; void spiBeginTransaction() override; void spiEndTransaction() override; #if ARCH_PORTDUINO - RADIOLIB_PIN_TYPE busy; void spiTransfer(uint8_t *out, size_t len, uint8_t *in) override; #endif @@ -146,10 +140,16 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified * doing the transmit */ void setTransmitDelay(); - /** random timer with certain min. and max. settings */ + /** + * random timer with certain min. and max. settings + * @return Timestamp after which the packet may be sent + */ void startTransmitTimer(bool withDelay = true); - /** timer scaled to SNR of to be flooded packet */ + /** + * timer scaled to SNR of to be flooded packet + * @return Timestamp after which the packet may be sent + */ void startTransmitTimerSNR(float snr); void handleTransmitInterrupt(); @@ -161,8 +161,9 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified /** start an immediate transmit * This method is virtual so subclasses can hook as needed, subclasses should not call directly + * @return true if packet was sent */ - virtual void startSend(meshtastic_MeshPacket *txp); + virtual bool startSend(meshtastic_MeshPacket *txp); meshtastic_QueueStatus getQueueStatus(); @@ -198,4 +199,9 @@ class RadioLibInterface : public RadioInterface, protected concurrency::Notified virtual void setStandby(); const char *radioLibErr = "RadioLib err="; + + /** + * If the packet is not already in the late rebroadcast window, move it there + */ + void clampToLateRebroadcastWindow(NodeNum from, PacketId id); }; \ No newline at end of file diff --git a/src/mesh/ReliableRouter.cpp b/src/mesh/ReliableRouter.cpp index a2e09362d..3e2850bcf 100644 --- a/src/mesh/ReliableRouter.cpp +++ b/src/mesh/ReliableRouter.cpp @@ -1,10 +1,10 @@ #include "ReliableRouter.h" #include "Default.h" -#include "MeshModule.h" #include "MeshTypes.h" #include "configuration.h" #include "mesh-pb-constants.h" #include "modules/NodeInfoModule.h" +#include "modules/RoutingModule.h" // ReliableRouter::ReliableRouter() {} @@ -53,14 +53,14 @@ bool ReliableRouter::shouldFilterReceived(const meshtastic_MeshPacket *p) auto key = GlobalPacketId(getFrom(p), p->id); auto old = findPendingPacket(key); if (old) { - LOG_DEBUG("generating implicit ack"); + LOG_DEBUG("Generate implicit ack"); // NOTE: we do NOT check p->wantAck here because p is the INCOMING rebroadcast and that packet is not expected to be // marked as wantAck sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, old->packet->channel); stopRetransmission(key); } else { - LOG_DEBUG("didn't find pending packet"); + LOG_DEBUG("Didn't find pending packet"); } } @@ -73,18 +73,6 @@ bool ReliableRouter::shouldFilterReceived(const meshtastic_MeshPacket *p) i->second.nextTxMsec += iface->getPacketTime(p); } - /* Resend implicit ACKs for repeated packets (hopStart equals hopLimit); - * this way if an implicit ACK is dropped and a packet is resent we'll rebroadcast again. - * Resending real ACKs is omitted, as you might receive a packet multiple times due to flooding and - * flooding this ACK back to the original sender already adds redundancy. */ - bool isRepeated = p->hop_start == 0 ? (p->hop_limit == HOP_RELIABLE) : (p->hop_start == p->hop_limit); - if (wasSeenRecently(p, false) && isRepeated && !MeshModule::currentReply && !isToUs(p)) { - LOG_DEBUG("Resending implicit ack for a repeated floodmsg"); - meshtastic_MeshPacket *tosend = packetPool.allocCopy(*p); - tosend->hop_limit--; // bump down the hop count - Router::send(tosend); - } - return FloodingRouter::shouldFilterReceived(p); } @@ -107,16 +95,22 @@ void ReliableRouter::sniffReceived(const meshtastic_MeshPacket *p, const meshtas if (MeshModule::currentReply) { LOG_DEBUG("Another module replied to this message, no need for 2nd ack"); } else if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) { - sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, p->hop_start, p->hop_limit); + // A response may be set to want_ack for retransmissions, but we don't need to ACK a response if it received an + // implicit ACK already. If we received it directly, only ACK with a hop limit of 0 + if (!p->decoded.request_id) + sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, + routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit)); + else if (p->hop_start > 0 && p->hop_start == p->hop_limit) + sendAckNak(meshtastic_Routing_Error_NONE, getFrom(p), p->id, p->channel, 0); } else if (p->which_payload_variant == meshtastic_MeshPacket_encrypted_tag && p->channel == 0 && (nodeDB->getMeshNode(p->from) == nullptr || nodeDB->getMeshNode(p->from)->user.public_key.size == 0)) { LOG_INFO("PKI packet from unknown node, send PKI_UNKNOWN_PUBKEY"); sendAckNak(meshtastic_Routing_Error_PKI_UNKNOWN_PUBKEY, getFrom(p), p->id, channels.getPrimaryIndex(), - p->hop_start, p->hop_limit); + routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit)); } else { // Send a 'NO_CHANNEL' error on the primary channel if want_ack packet destined for us cannot be decoded - sendAckNak(meshtastic_Routing_Error_NO_CHANNEL, getFrom(p), p->id, channels.getPrimaryIndex(), p->hop_start, - p->hop_limit); + sendAckNak(meshtastic_Routing_Error_NO_CHANNEL, getFrom(p), p->id, channels.getPrimaryIndex(), + routingModule->getHopLimitForResponse(p->hop_start, p->hop_limit)); } } if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag && c && @@ -182,9 +176,9 @@ bool ReliableRouter::stopRetransmission(GlobalPacketId key) if (old->numRetransmissions < NUM_RETRANSMISSIONS - 1) { // remove the 'original' (identified by originator and packet->id) from the txqueue and free it cancelSending(getFrom(p), p->id); - // now free the pooled copy for retransmission too - packetPool.release(p); } + // now free the pooled copy for retransmission too + packetPool.release(p); auto numErased = pending.erase(key); assert(numErased == 1); return true; @@ -224,17 +218,17 @@ int32_t ReliableRouter::doRetransmissions() bool stillValid = true; // assume we'll keep this record around - // FIXME, handle 51 day rolloever here!!! + // FIXME, handle 51 day rollover here!!! if (p.nextTxMsec <= now) { if (p.numRetransmissions == 0) { - LOG_DEBUG("Reliable send failed, returning a nak for fr=0x%x,to=0x%x,id=0x%x", p.packet->from, p.packet->to, + LOG_DEBUG("Reliable send failed, return a nak for fr=0x%x,to=0x%x,id=0x%x", p.packet->from, p.packet->to, p.packet->id); sendAckNak(meshtastic_Routing_Error_MAX_RETRANSMIT, getFrom(p.packet), p.packet->id, p.packet->channel); // Note: we don't stop retransmission here, instead the Nak packet gets processed in sniffReceived stopRetransmission(it->first); stillValid = false; // just deleted it } else { - LOG_DEBUG("Sending reliable retransmission fr=0x%x,to=0x%x,id=0x%x, tries left=%d", p.packet->from, p.packet->to, + LOG_DEBUG("Send reliable retransmission fr=0x%x,to=0x%x,id=0x%x, tries left=%d", p.packet->from, p.packet->to, p.packet->id, p.numRetransmissions); // Note: we call the superclass version because we don't want to have our version of send() add a new @@ -263,7 +257,7 @@ void ReliableRouter::setNextTx(PendingPacket *pending) assert(iface); auto d = iface->getRetransmissionMsec(pending->packet); pending->nextTxMsec = millis() + d; - LOG_DEBUG("Setting next retransmission in %u msecs: ", d); + LOG_DEBUG("Set next retransmission in %u msecs: ", d); printPacket("", pending->packet); setReceivedMessage(); // Run ASAP, so we can figure out our correct sleep time } \ No newline at end of file diff --git a/src/mesh/ReliableRouter.h b/src/mesh/ReliableRouter.h index 259da7249..ba9ab8c25 100644 --- a/src/mesh/ReliableRouter.h +++ b/src/mesh/ReliableRouter.h @@ -4,7 +4,7 @@ #include /** - * An identifier for a globalally unique message - a pair of the sending nodenum and the packet id assigned + * An identifier for a globally unique message - a pair of the sending nodenum and the packet id assigned * to that message */ struct GlobalPacketId { diff --git a/src/mesh/Router.cpp b/src/mesh/Router.cpp index b7296f959..f55e7cc5a 100644 --- a/src/mesh/Router.cpp +++ b/src/mesh/Router.cpp @@ -6,6 +6,7 @@ #include "NodeDB.h" #include "RTC.h" #include "configuration.h" +#include "detect/LoRaRadioType.h" #include "main.h" #include "mesh-pb-constants.h" #include "meshUtils.h" @@ -20,7 +21,6 @@ #if ENABLE_JSON_LOGGING || ARCH_PORTDUINO #include "serialization/MeshPacketSerializer.h" #endif -#include "../userPrefs.h" #define MAX_RX_FROMRADIO \ 4 // max number of packets destined to our queue, we dispatch packets quickly so it doesn't need to be big @@ -37,7 +37,6 @@ static MemoryDynamic staticPool; Allocator &packetPool = staticPool; static uint8_t bytes[MAX_LORA_PAYLOAD_LEN + 1] __attribute__((__aligned__)); -static uint8_t ScratchEncrypted[MAX_LORA_PAYLOAD_LEN + 1] __attribute__((__aligned__)); /** * Constructor @@ -71,7 +70,7 @@ int32_t Router::runOnce() perhapsHandleReceived(mp); } - // LOG_DEBUG("sleeping forever!"); + // LOG_DEBUG("Sleep forever!"); return INT32_MAX; // Wait a long time - until we get woken for the message queue } @@ -81,14 +80,17 @@ int32_t Router::runOnce() */ void Router::enqueueReceivedMessage(meshtastic_MeshPacket *p) { - if (fromRadioQueue.enqueue(p, 0)) { // NOWAIT - fixme, if queue is full, delete older messages - - // Nasty hack because our threading is primitive. interfaces shouldn't need to know about routers FIXME - setReceivedMessage(); - } else { - printPacket("BUG! fromRadioQueue is full! Discarding!", p); - packetPool.release(p); + // Try enqueue until successful + while (!fromRadioQueue.enqueue(p, 0)) { + meshtastic_MeshPacket *old_p; + old_p = fromRadioQueue.dequeuePtr(0); // Dequeue and discard the oldest packet + if (old_p) { + printPacket("fromRadioQ full, drop oldest!", old_p); + packetPool.release(old_p); + } } + // Nasty hack because our threading is primitive. interfaces shouldn't need to know about routers FIXME + setReceivedMessage(); } /// Generate a unique packet id @@ -133,15 +135,14 @@ meshtastic_MeshPacket *Router::allocForSending() /** * Send an ack or a nak packet back towards whoever sent idFrom */ -void Router::sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopStart, - uint8_t hopLimit) +void Router::sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit) { - routingModule->sendAckNak(err, to, idFrom, chIndex, hopStart, hopLimit); + routingModule->sendAckNak(err, to, idFrom, chIndex, hopLimit); } void Router::abortSendAndNak(meshtastic_Routing_Error err, meshtastic_MeshPacket *p) { - LOG_ERROR("Error=%d, returning NAK and dropping packet.", err); + LOG_ERROR("Error=%d, return NAK and drop packet", err); sendAckNak(err, getFrom(p), p->id, p->channel); packetPool.release(p); } @@ -181,13 +182,14 @@ ErrorCode Router::sendLocal(meshtastic_MeshPacket *p, RxSource src) } else { // If we are sending a broadcast, we also treat it as if we just received it ourself // this allows local apps (and PCs) to see broadcasts sourced locally - if (p->to == NODENUM_BROADCAST) { + if (isBroadcast(p->to)) { handleReceived(p, src); } - if (!p->channel && !p->pki_encrypted) { // don't override if a channel was requested + // don't override if a channel was requested and no need to set it when PKI is enforced + if (!p->channel && !p->pki_encrypted) { meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->to); - if (node && node->user.public_key.size == 0) { + if (node) { p->channel = node->channel; LOG_DEBUG("localSend to channel %d", p->channel); } @@ -216,13 +218,13 @@ ErrorCode Router::send(meshtastic_MeshPacket *p) if (hourlyTxPercent > myRegion->dutyCycle) { #ifdef DEBUG_PORT uint8_t silentMinutes = airTime->getSilentMinutes(hourlyTxPercent, myRegion->dutyCycle); - LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d minutes.", silentMinutes); + LOG_WARN("Duty cycle limit exceeded. Aborting send for now, you can send again in %d mins", silentMinutes); meshtastic_ClientNotification *cn = clientNotificationPool.allocZeroed(); cn->has_reply_id = true; cn->reply_id = p->id; cn->level = meshtastic_LogRecord_Level_WARNING; cn->time = getValidTime(RTCQualityFromNet); - sprintf(cn->message, "Duty cycle limit exceeded. You can send again in %d minutes.", silentMinutes); + sprintf(cn->message, "Duty cycle limit exceeded. You can send again in %d mins", silentMinutes); service->sendClientNotification(cn); #endif meshtastic_Routing_Error err = meshtastic_Routing_Error_DUTY_CYCLE_LIMIT; @@ -240,7 +242,7 @@ ErrorCode Router::send(meshtastic_MeshPacket *p) // assert // Never set the want_ack flag on broadcast packets sent over the air. - if (p->to == NODENUM_BROADCAST) + if (isBroadcast(p->to)) p->want_ack = false; // Up until this point we might have been using 0 for the from address (if it started with the phone), but when we send over @@ -268,6 +270,7 @@ ErrorCode Router::send(meshtastic_MeshPacket *p) auto encodeResult = perhapsEncode(p); if (encodeResult != meshtastic_Routing_Error_NONE) { packetPool.release(p_decoded); + p->channel = 0; // Reset the channel to 0, so we don't use the failing hash again abortSendAndNak(encodeResult, p); return encodeResult; // FIXME - this isn't a valid ErrorCode } @@ -323,17 +326,14 @@ bool perhapsDecode(meshtastic_MeshPacket *p) } bool decrypted = false; ChannelIndex chIndex = 0; - memcpy(bytes, p->encrypted.bytes, - rawSize); // we have to copy into a scratch buffer, because these bytes are a union with the decoded protobuf - memcpy(ScratchEncrypted, p->encrypted.bytes, rawSize); #if !(MESHTASTIC_EXCLUDE_PKI) // Attempt PKI decryption first - if (p->channel == 0 && isToUs(p) && p->to > 0 && p->to != NODENUM_BROADCAST && nodeDB->getMeshNode(p->from) != nullptr && + if (p->channel == 0 && isToUs(p) && p->to > 0 && !isBroadcast(p->to) && nodeDB->getMeshNode(p->from) != nullptr && nodeDB->getMeshNode(p->from)->user.public_key.size > 0 && nodeDB->getMeshNode(p->to)->user.public_key.size > 0 && rawSize > MESHTASTIC_PKC_OVERHEAD) { - LOG_DEBUG("Attempting PKI decryption"); + LOG_DEBUG("Attempt PKI decryption"); - if (crypto->decryptCurve25519(p->from, nodeDB->getMeshNode(p->from)->user.public_key, p->id, rawSize, ScratchEncrypted, + if (crypto->decryptCurve25519(p->from, nodeDB->getMeshNode(p->from)->user.public_key, p->id, rawSize, p->encrypted.bytes, bytes)) { LOG_INFO("PKI Decryption worked!"); memset(&p->decoded, 0, sizeof(p->decoded)); @@ -345,8 +345,6 @@ bool perhapsDecode(meshtastic_MeshPacket *p) p->pki_encrypted = true; memcpy(&p->public_key.bytes, nodeDB->getMeshNode(p->from)->user.public_key.bytes, 32); p->public_key.size = 32; - // memcpy(bytes, ScratchEncrypted, rawSize); // TODO: Rename the bytes buffers - // chIndex = 8; } else { LOG_ERROR("PKC Decrypted, but pb_decode failed!"); return false; @@ -363,6 +361,9 @@ bool perhapsDecode(meshtastic_MeshPacket *p) for (chIndex = 0; chIndex < channels.getNumChannels(); chIndex++) { // Try to use this hash/channel pair if (channels.decryptForHash(chIndex, p->channel)) { + // we have to copy into a scratch buffer, because these bytes are a union with the decoded protobuf. Create a + // fresh copy for each decrypt attempt. + memcpy(bytes, p->encrypted.bytes, rawSize); // Try to decrypt the packet if we can crypto->decrypt(p->from, p->id, rawSize, bytes); @@ -423,7 +424,7 @@ bool perhapsDecode(meshtastic_MeshPacket *p) } } -/** Return 0 for success or a Routing_Errror code for failure +/** Return 0 for success or a Routing_Error code for failure */ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) { @@ -460,13 +461,13 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) // If the compressed length is greater than or equal to the original size, don't use the compressed form if (compressed_len >= p->decoded.payload.size) { - LOG_DEBUG("Not using compressing message."); + LOG_DEBUG("Not using compressing message"); // Set the uncompressed payload variant anyway. Shouldn't hurt? // p->decoded.which_payloadVariant = Data_payload_tag; // Otherwise we use the compressor } else { - LOG_DEBUG("Using compressed message."); + LOG_DEBUG("Use compressed message"); // Copy the compressed data into the meshpacket p->decoded.payload.size = compressed_len; @@ -487,19 +488,22 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->to); // We may want to retool things so we can send a PKC packet when the client specifies a key and nodenum, even if the node // is not in the local nodedb - if ( + // First, only PKC encrypt packets we are originating + if (isFromUs(p) && + // Don't use PKC with simulator + radioType != SIM_RADIO && // Don't use PKC with Ham mode !owner.is_licensed && // Don't use PKC if it's not explicitly requested and a non-primary channel is requested !(p->pki_encrypted != true && p->channel > 0) && // Check for valid keys and single node destination - config.security.private_key.size == 32 && p->to != NODENUM_BROADCAST && node != nullptr && + config.security.private_key.size == 32 && !isBroadcast(p->to) && node != nullptr && // Check for a known public key for the destination (node->user.public_key.size == 32) && // Some portnums either make no sense to send with PKC p->decoded.portnum != meshtastic_PortNum_TRACEROUTE_APP && p->decoded.portnum != meshtastic_PortNum_NODEINFO_APP && p->decoded.portnum != meshtastic_PortNum_ROUTING_APP && p->decoded.portnum != meshtastic_PortNum_POSITION_APP) { - LOG_DEBUG("Using PKI!"); + LOG_DEBUG("Use PKI!"); if (numbytes + MESHTASTIC_HEADER_LENGTH + MESHTASTIC_PKC_OVERHEAD > MAX_LORA_PAYLOAD_LEN) return meshtastic_Routing_Error_TOO_LARGE; if (p->pki_encrypted && !memfll(p->public_key.bytes, 0, 32) && @@ -508,9 +512,8 @@ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p) *node->user.public_key.bytes); return meshtastic_Routing_Error_PKI_FAILED; } - crypto->encryptCurve25519(p->to, getFrom(p), node->user.public_key, p->id, numbytes, bytes, ScratchEncrypted); + crypto->encryptCurve25519(p->to, getFrom(p), node->user.public_key, p->id, numbytes, bytes, p->encrypted.bytes); numbytes += MESHTASTIC_PKC_OVERHEAD; - memcpy(p->encrypted.bytes, ScratchEncrypted, numbytes); p->channel = 0; p->pki_encrypted = true; } else { @@ -586,24 +589,25 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src) if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag && p->decoded.portnum == meshtastic_PortNum_NEIGHBORINFO_APP && (!moduleConfig.has_neighbor_info || !moduleConfig.neighbor_info.enabled)) { - LOG_DEBUG("Neighbor info module is disabled, ignoring neighbor packet"); + LOG_DEBUG("Neighbor info module is disabled, ignore neighbor packet"); cancelSending(p->from, p->id); skipHandle = true; } + bool shouldIgnoreNonstandardPorts = + config.device.rebroadcast_mode == meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY; #if USERPREFS_EVENT_MODE - if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag && - (p->decoded.portnum == meshtastic_PortNum_ATAK_FORWARDER || p->decoded.portnum == meshtastic_PortNum_ATAK_PLUGIN || - p->decoded.portnum == meshtastic_PortNum_PAXCOUNTER_APP || p->decoded.portnum == meshtastic_PortNum_IP_TUNNEL_APP || - p->decoded.portnum == meshtastic_PortNum_AUDIO_APP || p->decoded.portnum == meshtastic_PortNum_PRIVATE_APP || - p->decoded.portnum == meshtastic_PortNum_DETECTION_SENSOR_APP || - p->decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP || - p->decoded.portnum == meshtastic_PortNum_REMOTE_HARDWARE_APP)) { - LOG_DEBUG("Ignoring packet on blacklisted portnum during event"); + shouldIgnoreNonstandardPorts = true; +#endif + if (shouldIgnoreNonstandardPorts && p->which_payload_variant == meshtastic_MeshPacket_decoded_tag && + IS_ONE_OF(p->decoded.portnum, meshtastic_PortNum_ATAK_FORWARDER, meshtastic_PortNum_ATAK_PLUGIN, + meshtastic_PortNum_PAXCOUNTER_APP, meshtastic_PortNum_IP_TUNNEL_APP, meshtastic_PortNum_AUDIO_APP, + meshtastic_PortNum_PRIVATE_APP, meshtastic_PortNum_DETECTION_SENSOR_APP, meshtastic_PortNum_RANGE_TEST_APP, + meshtastic_PortNum_REMOTE_HARDWARE_APP)) { + LOG_DEBUG("Ignore packet on blacklisted portnum for CORE_PORTNUMS_ONLY"); cancelSending(p->from, p->id); skipHandle = true; } -#endif } else { printPacket("packet decoding failed or skipped (no PSK?)", p); } @@ -615,7 +619,7 @@ void Router::handleReceived(meshtastic_MeshPacket *p, RxSource src) #if !MESHTASTIC_EXCLUDE_MQTT // Mark as pki_encrypted if it is not yet decoded and MQTT encryption is also enabled, hash matches and it's a DM not to // us (because we would be able to decrypt it) - if (!decoded && moduleConfig.mqtt.encryption_enabled && p->channel == 0x00 && p->to != NODENUM_BROADCAST && !isToUs(p)) + if (!decoded && moduleConfig.mqtt.encryption_enabled && p->channel == 0x00 && !isBroadcast(p->to) && !isToUs(p)) p_encrypted->pki_encrypted = true; // After potentially altering it, publish received message to MQTT if we're not the original transmitter of the packet if ((decoded || p_encrypted->pki_encrypted) && moduleConfig.mqtt.enabled && !isFromUs(p) && mqtt) @@ -641,13 +645,20 @@ void Router::perhapsHandleReceived(meshtastic_MeshPacket *p) #endif // assert(radioConfig.has_preferences); if (is_in_repeated(config.lora.ignore_incoming, p->from)) { - LOG_DEBUG("Ignoring msg, 0x%x is in our ignore list", p->from); + LOG_DEBUG("Ignore msg, 0x%x is in our ignore list", p->from); + packetPool.release(p); + return; + } + + meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(p->from); + if (node != NULL && node->is_ignored) { + LOG_DEBUG("Ignore msg, 0x%x is ignored", p->from); packetPool.release(p); return; } if (p->from == NODENUM_BROADCAST) { - LOG_DEBUG("Ignoring msg from broadcast address"); + LOG_DEBUG("Ignore msg from broadcast address"); packetPool.release(p); return; } diff --git a/src/mesh/Router.h b/src/mesh/Router.h index 8ebc1a3e5..da44d67df 100644 --- a/src/mesh/Router.h +++ b/src/mesh/Router.h @@ -108,8 +108,7 @@ class Router : protected concurrency::OSThread /** * Send an ack or a nak packet back towards whoever sent idFrom */ - void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopStart = 0, - uint8_t hopLimit = 0); + void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit = 0); private: /** @@ -132,7 +131,7 @@ class Router : protected concurrency::OSThread */ void handleReceived(meshtastic_MeshPacket *p, RxSource src = RX_SRC_RADIO); - /** Frees the provided packet, and generates a NAK indicating the speicifed error while sending */ + /** Frees the provided packet, and generates a NAK indicating the specifed error while sending */ void abortSendAndNak(meshtastic_Routing_Error err, meshtastic_MeshPacket *p); }; @@ -143,7 +142,7 @@ class Router : protected concurrency::OSThread */ bool perhapsDecode(meshtastic_MeshPacket *p); -/** Return 0 for success or a Routing_Errror code for failure +/** Return 0 for success or a Routing_Error code for failure */ meshtastic_Routing_Error perhapsEncode(meshtastic_MeshPacket *p); diff --git a/src/mesh/SX126xInterface.cpp b/src/mesh/SX126xInterface.cpp index c88ed39d9..ed0267c5b 100644 --- a/src/mesh/SX126xInterface.cpp +++ b/src/mesh/SX126xInterface.cpp @@ -50,9 +50,7 @@ template bool SX126xInterface::init() #endif #if ARCH_PORTDUINO - float tcxoVoltage = 0; - if (settingsMap[dio3_tcxo_voltage]) - tcxoVoltage = 1.8; + float tcxoVoltage = (float)settingsMap[dio3_tcxo_voltage] / 1000; if (settingsMap[sx126x_ant_sw] != RADIOLIB_NC) { digitalWrite(settingsMap[sx126x_ant_sw], HIGH); pinMode(settingsMap[sx126x_ant_sw], OUTPUT); @@ -94,7 +92,7 @@ template bool SX126xInterface::init() // Overriding current limit // (https://github.com/jgromes/RadioLib/blob/690a050ebb46e6097c5d00c371e961c1caa3b52e/src/modules/SX126x/SX126x.cpp#L85) using - // value in SX126xInterface.h (currently 140 mA) It may or may not be neccessary, depending on how RadioLib functions, from + // value in SX126xInterface.h (currently 140 mA) It may or may not be necessary, depending on how RadioLib functions, from // SX1261/2 datasheet: OCP after setting DeviceSel with SetPaConfig(): SX1261 - 60 mA, SX1262 - 140 mA For the SX1268 the IC // defaults to 140mA no matter the set power level, but RadioLib set it lower, this would need further checking Default values // are: SX1262, SX1268: 0x38 (140 mA), SX1261: 0x18 (60 mA) @@ -123,7 +121,7 @@ template bool SX126xInterface::init() // no effect #if ARCH_PORTDUINO if (res == RADIOLIB_ERR_NONE) { - LOG_DEBUG("Using MCU pin %i as RXEN and pin %i as TXEN to control RF switching", settingsMap[rxen], settingsMap[txen]); + LOG_DEBUG("Use MCU pin %i as RXEN and pin %i as TXEN to control RF switching", settingsMap[rxen], settingsMap[txen]); lora.setRfSwitchPins(settingsMap[rxen], settingsMap[txen]); } #else @@ -136,7 +134,7 @@ template bool SX126xInterface::init() LOG_DEBUG("SX126X_TXEN not defined, defaulting to RADIOLIB_NC"); #endif if (res == RADIOLIB_ERR_NONE) { - LOG_DEBUG("Using MCU pin %i as RXEN and pin %i as TXEN to control RF switching", SX126X_RXEN, SX126X_TXEN); + LOG_DEBUG("Use MCU pin %i as RXEN and pin %i as TXEN to control RF switching", SX126X_RXEN, SX126X_TXEN); lora.setRfSwitchPins(SX126X_RXEN, SX126X_TXEN); } #endif diff --git a/src/mesh/SX128xInterface.cpp b/src/mesh/SX128xInterface.cpp index 9fe86cc6e..013164bca 100644 --- a/src/mesh/SX128xInterface.cpp +++ b/src/mesh/SX128xInterface.cpp @@ -71,7 +71,7 @@ template bool SX128xInterface::init() LOG_INFO("SX128x init result %d", res); if ((config.lora.region != meshtastic_Config_LoRaConfig_RegionCode_LORA_24) && (res == RADIOLIB_ERR_INVALID_FREQUENCY)) { - LOG_WARN("Radio chip only supports 2.4GHz LoRa. Adjusting Region and rebooting."); + LOG_WARN("Radio only supports 2.4GHz LoRa. Adjusting Region and rebooting"); config.lora.region = meshtastic_Config_LoRaConfig_RegionCode_LORA_24; nodeDB->saveToDisk(SEGMENT_CONFIG); delay(2000); @@ -80,7 +80,7 @@ template bool SX128xInterface::init() #elif defined(ARCH_NRF52) NVIC_SystemReset(); #else - LOG_ERROR("FIXME implement reboot for this platform. Skipping for now."); + LOG_ERROR("FIXME implement reboot for this platform. Skip for now"); #endif } diff --git a/src/mesh/StreamAPI.h b/src/mesh/StreamAPI.h index 45cbb231c..6e0364bc1 100644 --- a/src/mesh/StreamAPI.h +++ b/src/mesh/StreamAPI.h @@ -3,6 +3,7 @@ #include "PhoneAPI.h" #include "Stream.h" #include "concurrency/OSThread.h" +#include // A To/FromRadio packet + our 32 bit header #define MAX_STREAM_BUF_SIZE (MAX_TO_FROM_RADIO_SIZE + sizeof(uint32_t)) diff --git a/src/mesh/TypeConversions.cpp b/src/mesh/TypeConversions.cpp index 550f87021..5fc6b8a64 100644 --- a/src/mesh/TypeConversions.cpp +++ b/src/mesh/TypeConversions.cpp @@ -12,6 +12,7 @@ meshtastic_NodeInfo TypeConversions::ConvertToNodeInfo(const meshtastic_NodeInfo info.channel = lite->channel; info.via_mqtt = lite->via_mqtt; info.is_favorite = lite->is_favorite; + info.is_ignored = lite->is_ignored; if (lite->has_hops_away) { info.has_hops_away = true; diff --git a/src/mesh/aes-ccm.cpp b/src/mesh/aes-ccm.cpp index b9af14fdb..a650ba2fc 100644 --- a/src/mesh/aes-ccm.cpp +++ b/src/mesh/aes-ccm.cpp @@ -10,7 +10,7 @@ #include "aes-ccm.h" #if !MESHTASTIC_EXCLUDE_PKI -static inline void WPA_PUT_BE16(uint8_t *a, uint16_t val) +static void WPA_PUT_BE16(uint8_t *a, uint16_t val) { a[0] = val >> 8; a[1] = val & 0xff; @@ -18,12 +18,9 @@ static inline void WPA_PUT_BE16(uint8_t *a, uint16_t val) static void xor_aes_block(uint8_t *dst, const uint8_t *src) { - uint32_t *d = (uint32_t *)dst; - uint32_t *s = (uint32_t *)src; - *d++ ^= *s++; - *d++ ^= *s++; - *d++ ^= *s++; - *d++ ^= *s++; + for (uint8_t i = 0; i < AES_BLOCK_SIZE; i++) { + dst[i] ^= src[i]; + } } static void aes_ccm_auth_start(size_t M, size_t L, const uint8_t *nonce, const uint8_t *aad, size_t aad_len, size_t plain_len, uint8_t *x) diff --git a/src/mesh/api/ServerAPI.cpp b/src/mesh/api/ServerAPI.cpp index 7705858b5..e28e4c815 100644 --- a/src/mesh/api/ServerAPI.cpp +++ b/src/mesh/api/ServerAPI.cpp @@ -30,7 +30,7 @@ template int32_t ServerAPI::runOnce() if (client.connected()) { return StreamAPI::runOncePart(); } else { - LOG_INFO("Client dropped connection, suspending API service"); + LOG_INFO("Client dropped connection, suspend API service"); enabled = false; // we no longer need to run return 0; } @@ -63,11 +63,11 @@ template int32_t APIServerPort::runOnce() // Reconnections are delayed by full wait time if (waitTime < 400) { waitTime *= 2; - LOG_INFO("Previous TCP connection still open, trying again in %dms", waitTime); + LOG_INFO("Previous TCP connection still open, try again in %dms", waitTime); return waitTime; } #endif - LOG_INFO("Force closing previous TCP connection"); + LOG_INFO("Force close previous TCP connection"); delete openAPI; } diff --git a/src/mesh/api/ServerAPI.h b/src/mesh/api/ServerAPI.h index 5b84fddd7..fe6a733a7 100644 --- a/src/mesh/api/ServerAPI.h +++ b/src/mesh/api/ServerAPI.h @@ -2,6 +2,8 @@ #include "StreamAPI.h" +#define SERVER_API_DEFAULT_PORT 4403 + /** * Provides both debug printing and, if the client starts sending protobufs to us, switches to send/receive protobufs * (and starts dropping debug printing - FIXME, eventually those prints should be encapsulated in protobufs). diff --git a/src/mesh/api/WiFiServerAPI.cpp b/src/mesh/api/WiFiServerAPI.cpp index 89ab2c626..5b63bc165 100644 --- a/src/mesh/api/WiFiServerAPI.cpp +++ b/src/mesh/api/WiFiServerAPI.cpp @@ -11,7 +11,7 @@ void initApiServer(int port) // Start API server on port 4403 if (!apiPort) { apiPort = new WiFiServerPort(port); - LOG_INFO("API server listening on TCP port %d", port); + LOG_INFO("API server listen on TCP port %d", port); apiPort->init(); } } diff --git a/src/mesh/api/WiFiServerAPI.h b/src/mesh/api/WiFiServerAPI.h index 7a3d2967f..6e60bb678 100644 --- a/src/mesh/api/WiFiServerAPI.h +++ b/src/mesh/api/WiFiServerAPI.h @@ -22,5 +22,5 @@ class WiFiServerPort : public APIServerPort explicit WiFiServerPort(int port); }; -void initApiServer(int port = 4403); +void initApiServer(int port = SERVER_API_DEFAULT_PORT); void deInitApiServer(); \ No newline at end of file diff --git a/src/mesh/api/ethServerAPI.h b/src/mesh/api/ethServerAPI.h index 6f214c75a..9d25a2fc1 100644 --- a/src/mesh/api/ethServerAPI.h +++ b/src/mesh/api/ethServerAPI.h @@ -22,4 +22,4 @@ class ethServerPort : public APIServerPort explicit ethServerPort(int port); }; -void initApiServer(int port = 4403); +void initApiServer(int port = SERVER_API_DEFAULT_PORT); diff --git a/src/mesh/eth/ethClient.cpp b/src/mesh/eth/ethClient.cpp index 67da224c6..3b4d716f5 100644 --- a/src/mesh/eth/ethClient.cpp +++ b/src/mesh/eth/ethClient.cpp @@ -38,16 +38,16 @@ static int32_t reconnectETH() Ethernet.maintain(); if (!ethStartupComplete) { // Start web server - LOG_INFO("Starting Ethernet network services"); + LOG_INFO("Start Ethernet network services"); #ifndef DISABLE_NTP - LOG_INFO("Starting NTP time client"); + LOG_INFO("Start NTP time client"); timeClient.begin(); timeClient.setUpdateInterval(60 * 60); // Update once an hour #endif if (config.network.rsyslog_server[0]) { - LOG_INFO("Starting Syslog client"); + LOG_INFO("Start Syslog client"); // Defaults int serverPort = 514; const char *serverAddr = config.network.rsyslog_server; @@ -82,9 +82,9 @@ static int32_t reconnectETH() #ifndef DISABLE_NTP if (isEthernetAvailable() && (ntp_renew < millis())) { - LOG_INFO("Updating NTP time from %s", config.network.ntp_server); + LOG_INFO("Update NTP time from %s", config.network.ntp_server); if (timeClient.update()) { - LOG_DEBUG("NTP Request Success - Setting RTCQualityNTP if needed"); + LOG_DEBUG("NTP Request Success - Set RTCQualityNTP if needed"); struct timeval tv; tv.tv_sec = timeClient.getEpochTime(); @@ -127,10 +127,10 @@ bool initEthernet() mac[0] &= 0xfe; // Make sure this is not a multicast MAC if (config.network.address_mode == meshtastic_Config_NetworkConfig_AddressMode_DHCP) { - LOG_INFO("starting Ethernet DHCP"); + LOG_INFO("Start Ethernet DHCP"); status = Ethernet.begin(mac); } else if (config.network.address_mode == meshtastic_Config_NetworkConfig_AddressMode_STATIC) { - LOG_INFO("starting Ethernet Static"); + LOG_INFO("Start Ethernet Static"); Ethernet.begin(mac, config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.gateway, config.network.ipv4_config.subnet); status = 1; @@ -141,13 +141,13 @@ bool initEthernet() if (status == 0) { if (Ethernet.hardwareStatus() == EthernetNoHardware) { - LOG_ERROR("Ethernet shield was not found."); + LOG_ERROR("Ethernet shield was not found"); return false; } else if (Ethernet.linkStatus() == LinkOFF) { - LOG_ERROR("Ethernet cable is not connected."); + LOG_ERROR("Ethernet cable is not connected"); return false; } else { - LOG_ERROR("Unknown Ethernet error."); + LOG_ERROR("Unknown Ethernet error"); return false; } } else { diff --git a/src/mesh/generated/meshtastic/admin.pb.cpp b/src/mesh/generated/meshtastic/admin.pb.cpp index 8b3fd3d1b..7ce3c74ce 100644 --- a/src/mesh/generated/meshtastic/admin.pb.cpp +++ b/src/mesh/generated/meshtastic/admin.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/admin.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/admin.pb.h b/src/mesh/generated/meshtastic/admin.pb.h index d802eb3da..d9b8de384 100644 --- a/src/mesh/generated/meshtastic/admin.pb.h +++ b/src/mesh/generated/meshtastic/admin.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_ADMIN_PB_H_INCLUDED @@ -180,6 +180,10 @@ typedef struct _meshtastic_AdminMessage { meshtastic_DeviceUIConfig get_ui_config_response; /* Tell the node to store UI data persistently. */ meshtastic_DeviceUIConfig store_ui_config; + /* Set specified node-num to be ignored on the NodeDB on the device */ + uint32_t set_ignored_node; + /* Set specified node-num to be un-ignored on the NodeDB on the device */ + uint32_t remove_ignored_node; /* Begins an edit transaction for config, module config, owner, and channel settings changes This will delay the standard *implicit* save to the file system and subsequent reboot behavior until committed (commit_edit_settings) */ bool begin_edit_settings; @@ -279,6 +283,8 @@ extern "C" { #define meshtastic_AdminMessage_get_ui_config_request_tag 44 #define meshtastic_AdminMessage_get_ui_config_response_tag 45 #define meshtastic_AdminMessage_store_ui_config_tag 46 +#define meshtastic_AdminMessage_set_ignored_node_tag 47 +#define meshtastic_AdminMessage_remove_ignored_node_tag 48 #define meshtastic_AdminMessage_begin_edit_settings_tag 64 #define meshtastic_AdminMessage_commit_edit_settings_tag 65 #define meshtastic_AdminMessage_factory_reset_device_tag 94 @@ -329,6 +335,8 @@ X(a, STATIC, ONEOF, FIXED32, (payload_variant,set_time_only,set_time_only) X(a, STATIC, ONEOF, BOOL, (payload_variant,get_ui_config_request,get_ui_config_request), 44) \ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,get_ui_config_response,get_ui_config_response), 45) \ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,store_ui_config,store_ui_config), 46) \ +X(a, STATIC, ONEOF, UINT32, (payload_variant,set_ignored_node,set_ignored_node), 47) \ +X(a, STATIC, ONEOF, UINT32, (payload_variant,remove_ignored_node,remove_ignored_node), 48) \ X(a, STATIC, ONEOF, BOOL, (payload_variant,begin_edit_settings,begin_edit_settings), 64) \ X(a, STATIC, ONEOF, BOOL, (payload_variant,commit_edit_settings,commit_edit_settings), 65) \ X(a, STATIC, ONEOF, INT32, (payload_variant,factory_reset_device,factory_reset_device), 94) \ diff --git a/src/mesh/generated/meshtastic/apponly.pb.cpp b/src/mesh/generated/meshtastic/apponly.pb.cpp index 64d43b7ee..8b1b3da19 100644 --- a/src/mesh/generated/meshtastic/apponly.pb.cpp +++ b/src/mesh/generated/meshtastic/apponly.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/apponly.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/apponly.pb.h b/src/mesh/generated/meshtastic/apponly.pb.h index dc08d9ff3..f4c33bd79 100644 --- a/src/mesh/generated/meshtastic/apponly.pb.h +++ b/src/mesh/generated/meshtastic/apponly.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_APPONLY_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/atak.pb.cpp b/src/mesh/generated/meshtastic/atak.pb.cpp index 6dbc69fb4..a0368cf6b 100644 --- a/src/mesh/generated/meshtastic/atak.pb.cpp +++ b/src/mesh/generated/meshtastic/atak.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/atak.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/atak.pb.h b/src/mesh/generated/meshtastic/atak.pb.h index 15a86788b..8533bcbf9 100644 --- a/src/mesh/generated/meshtastic/atak.pb.h +++ b/src/mesh/generated/meshtastic/atak.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_ATAK_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/cannedmessages.pb.cpp b/src/mesh/generated/meshtastic/cannedmessages.pb.cpp index 9f51e9634..1f4ebc927 100644 --- a/src/mesh/generated/meshtastic/cannedmessages.pb.cpp +++ b/src/mesh/generated/meshtastic/cannedmessages.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/cannedmessages.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/cannedmessages.pb.h b/src/mesh/generated/meshtastic/cannedmessages.pb.h index 06d14b98f..8343c4d6e 100644 --- a/src/mesh/generated/meshtastic/cannedmessages.pb.h +++ b/src/mesh/generated/meshtastic/cannedmessages.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_CANNEDMESSAGES_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/channel.pb.cpp b/src/mesh/generated/meshtastic/channel.pb.cpp index 52f923b13..6670a40fc 100644 --- a/src/mesh/generated/meshtastic/channel.pb.cpp +++ b/src/mesh/generated/meshtastic/channel.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/channel.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/channel.pb.h b/src/mesh/generated/meshtastic/channel.pb.h index 3d617ae39..ca4310bf1 100644 --- a/src/mesh/generated/meshtastic/channel.pb.h +++ b/src/mesh/generated/meshtastic/channel.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_CHANNEL_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/clientonly.pb.cpp b/src/mesh/generated/meshtastic/clientonly.pb.cpp index d99af8cf5..8f380a972 100644 --- a/src/mesh/generated/meshtastic/clientonly.pb.cpp +++ b/src/mesh/generated/meshtastic/clientonly.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/clientonly.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/clientonly.pb.h b/src/mesh/generated/meshtastic/clientonly.pb.h index bf32d7875..5109e20b2 100644 --- a/src/mesh/generated/meshtastic/clientonly.pb.h +++ b/src/mesh/generated/meshtastic/clientonly.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_CLIENTONLY_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/config.pb.cpp b/src/mesh/generated/meshtastic/config.pb.cpp index 23f4d542b..6fd2161ae 100644 --- a/src/mesh/generated/meshtastic/config.pb.cpp +++ b/src/mesh/generated/meshtastic/config.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/config.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/config.pb.h b/src/mesh/generated/meshtastic/config.pb.h index 72a89fcdf..5e105ab17 100644 --- a/src/mesh/generated/meshtastic/config.pb.h +++ b/src/mesh/generated/meshtastic/config.pb.h @@ -1,9 +1,10 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_CONFIG_PB_H_INCLUDED #include +#include "meshtastic/device_ui.pb.h" #if PB_PROTO_HEADER_VERSION != 40 #error Regenerate this file with the current version of nanopb generator. @@ -57,7 +58,13 @@ typedef enum _meshtastic_Config_DeviceConfig_Role { Technical Details: Turns off many of the routine broadcasts to favor ATAK CoT packet stream and automatic TAK PLI (position location information) broadcasts. Uses position module configuration to determine TAK PLI broadcast interval. */ - meshtastic_Config_DeviceConfig_Role_TAK_TRACKER = 10 + meshtastic_Config_DeviceConfig_Role_TAK_TRACKER = 10, + /* Description: Will always rebroadcast packets, but will do so after all other modes. + Technical Details: Used for router nodes that are intended to provide additional coverage + in areas not already covered by other routers, or to bridge around problematic terrain, + but should not be given priority over other routers in order to avoid unnecessaraily + consuming hops. */ + meshtastic_Config_DeviceConfig_Role_ROUTER_LATE = 11 } meshtastic_Config_DeviceConfig_Role; /* Defines the device's behavior for how messages are rebroadcast */ @@ -75,7 +82,10 @@ typedef enum _meshtastic_Config_DeviceConfig_RebroadcastMode { but takes it step further by also ignoring messages from nodenums not in the node's known list (NodeDB) */ meshtastic_Config_DeviceConfig_RebroadcastMode_KNOWN_ONLY = 3, /* Only permitted for SENSOR, TRACKER and TAK_TRACKER roles, this will inhibit all rebroadcasts, not unlike CLIENT_MUTE role. */ - meshtastic_Config_DeviceConfig_RebroadcastMode_NONE = 4 + meshtastic_Config_DeviceConfig_RebroadcastMode_NONE = 4, + /* Ignores packets from non-standard portnums such as: TAK, RangeTest, PaxCounter, etc. + Only rebroadcasts packets with standard portnums: NodeInfo, Text, Position, Telemetry, and Routing. */ + meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY = 5 } meshtastic_Config_DeviceConfig_RebroadcastMode; /* Bit field of boolean configuration options, indicating which optional @@ -573,6 +583,7 @@ typedef struct _meshtastic_Config { meshtastic_Config_BluetoothConfig bluetooth; meshtastic_Config_SecurityConfig security; meshtastic_Config_SessionkeyConfig sessionkey; + meshtastic_DeviceUIConfig device_ui; } payload_variant; } meshtastic_Config; @@ -583,12 +594,12 @@ extern "C" { /* Helper constants for enums */ #define _meshtastic_Config_DeviceConfig_Role_MIN meshtastic_Config_DeviceConfig_Role_CLIENT -#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_TAK_TRACKER -#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_TAK_TRACKER+1)) +#define _meshtastic_Config_DeviceConfig_Role_MAX meshtastic_Config_DeviceConfig_Role_ROUTER_LATE +#define _meshtastic_Config_DeviceConfig_Role_ARRAYSIZE ((meshtastic_Config_DeviceConfig_Role)(meshtastic_Config_DeviceConfig_Role_ROUTER_LATE+1)) #define _meshtastic_Config_DeviceConfig_RebroadcastMode_MIN meshtastic_Config_DeviceConfig_RebroadcastMode_ALL -#define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_NONE -#define _meshtastic_Config_DeviceConfig_RebroadcastMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_RebroadcastMode)(meshtastic_Config_DeviceConfig_RebroadcastMode_NONE+1)) +#define _meshtastic_Config_DeviceConfig_RebroadcastMode_MAX meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY +#define _meshtastic_Config_DeviceConfig_RebroadcastMode_ARRAYSIZE ((meshtastic_Config_DeviceConfig_RebroadcastMode)(meshtastic_Config_DeviceConfig_RebroadcastMode_CORE_PORTNUMS_ONLY+1)) #define _meshtastic_Config_PositionConfig_PositionFlags_MIN meshtastic_Config_PositionConfig_PositionFlags_UNSET #define _meshtastic_Config_PositionConfig_PositionFlags_MAX meshtastic_Config_PositionConfig_PositionFlags_SPEED @@ -776,6 +787,7 @@ extern "C" { #define meshtastic_Config_bluetooth_tag 7 #define meshtastic_Config_security_tag 8 #define meshtastic_Config_sessionkey_tag 9 +#define meshtastic_Config_device_ui_tag 10 /* Struct field encoding specification for nanopb */ #define meshtastic_Config_FIELDLIST(X, a) \ @@ -787,7 +799,8 @@ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,display,payload_variant.disp X(a, STATIC, ONEOF, MESSAGE, (payload_variant,lora,payload_variant.lora), 6) \ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,bluetooth,payload_variant.bluetooth), 7) \ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,security,payload_variant.security), 8) \ -X(a, STATIC, ONEOF, MESSAGE, (payload_variant,sessionkey,payload_variant.sessionkey), 9) +X(a, STATIC, ONEOF, MESSAGE, (payload_variant,sessionkey,payload_variant.sessionkey), 9) \ +X(a, STATIC, ONEOF, MESSAGE, (payload_variant,device_ui,payload_variant.device_ui), 10) #define meshtastic_Config_CALLBACK NULL #define meshtastic_Config_DEFAULT NULL #define meshtastic_Config_payload_variant_device_MSGTYPE meshtastic_Config_DeviceConfig @@ -799,6 +812,7 @@ X(a, STATIC, ONEOF, MESSAGE, (payload_variant,sessionkey,payload_variant.s #define meshtastic_Config_payload_variant_bluetooth_MSGTYPE meshtastic_Config_BluetoothConfig #define meshtastic_Config_payload_variant_security_MSGTYPE meshtastic_Config_SecurityConfig #define meshtastic_Config_payload_variant_sessionkey_MSGTYPE meshtastic_Config_SessionkeyConfig +#define meshtastic_Config_payload_variant_device_ui_MSGTYPE meshtastic_DeviceUIConfig #define meshtastic_Config_DeviceConfig_FIELDLIST(X, a) \ X(a, STATIC, SINGULAR, UENUM, role, 1) \ diff --git a/src/mesh/generated/meshtastic/connection_status.pb.cpp b/src/mesh/generated/meshtastic/connection_status.pb.cpp index d1495bb83..b0df459ad 100644 --- a/src/mesh/generated/meshtastic/connection_status.pb.cpp +++ b/src/mesh/generated/meshtastic/connection_status.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/connection_status.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/connection_status.pb.h b/src/mesh/generated/meshtastic/connection_status.pb.h index c433e370b..55559dcef 100644 --- a/src/mesh/generated/meshtastic/connection_status.pb.h +++ b/src/mesh/generated/meshtastic/connection_status.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_CONNECTION_STATUS_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/device_ui.pb.cpp b/src/mesh/generated/meshtastic/device_ui.pb.cpp index 6e0cf0cc8..3a9e28725 100644 --- a/src/mesh/generated/meshtastic/device_ui.pb.cpp +++ b/src/mesh/generated/meshtastic/device_ui.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/device_ui.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/device_ui.pb.h b/src/mesh/generated/meshtastic/device_ui.pb.h index 469fe6f11..0c4f5384e 100644 --- a/src/mesh/generated/meshtastic/device_ui.pb.h +++ b/src/mesh/generated/meshtastic/device_ui.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_DEVICE_UI_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_DEVICE_UI_PB_H_INCLUDED @@ -40,7 +40,21 @@ typedef enum _meshtastic_Language { /* Polish */ meshtastic_Language_POLISH = 8, /* Turkish */ - meshtastic_Language_TURKISH = 9 + meshtastic_Language_TURKISH = 9, + /* Serbian */ + meshtastic_Language_SERBIAN = 10, + /* Russian */ + meshtastic_Language_RUSSIAN = 11, + /* Dutch */ + meshtastic_Language_DUTCH = 12, + /* Greek */ + meshtastic_Language_GREEK = 13, + /* Norwegian */ + meshtastic_Language_NORWEGIAN = 14, + /* Simplified Chinese (experimental) */ + meshtastic_Language_SIMPLIFIED_CHINESE = 30, + /* Traditional Chinese (experimental) */ + meshtastic_Language_TRADITIONAL_CHINESE = 31 } meshtastic_Language; /* Struct definitions */ @@ -72,17 +86,24 @@ typedef struct _meshtastic_NodeHighlight { char node_name[16]; } meshtastic_NodeHighlight; +typedef PB_BYTES_ARRAY_T(16) meshtastic_DeviceUIConfig_calibration_data_t; typedef struct _meshtastic_DeviceUIConfig { + /* A version integer used to invalidate saved files when we make incompatible changes. */ + uint32_t version; /* TFT display brightness 1..255 */ uint8_t screen_brightness; /* Screen timeout 0..900 */ uint16_t screen_timeout; - /* Screen lock enabled */ + /* Screen/Settings lock enabled */ bool screen_lock; + bool settings_lock; + uint32_t pin_code; /* Color theme */ meshtastic_Theme theme; - /* Audible message alert enabled */ + /* Audible message, banner and ring tone */ bool alert_enabled; + bool banner_enabled; + uint8_t ring_tone_id; /* Localization */ meshtastic_Language language; /* Node list filter */ @@ -91,6 +112,8 @@ typedef struct _meshtastic_DeviceUIConfig { /* Node list highlightening */ bool has_node_highlight; meshtastic_NodeHighlight node_highlight; + /* 8 integers for screen calibration data */ + meshtastic_DeviceUIConfig_calibration_data_t calibration_data; } meshtastic_DeviceUIConfig; @@ -104,8 +127,8 @@ extern "C" { #define _meshtastic_Theme_ARRAYSIZE ((meshtastic_Theme)(meshtastic_Theme_RED+1)) #define _meshtastic_Language_MIN meshtastic_Language_ENGLISH -#define _meshtastic_Language_MAX meshtastic_Language_TURKISH -#define _meshtastic_Language_ARRAYSIZE ((meshtastic_Language)(meshtastic_Language_TURKISH+1)) +#define _meshtastic_Language_MAX meshtastic_Language_TRADITIONAL_CHINESE +#define _meshtastic_Language_ARRAYSIZE ((meshtastic_Language)(meshtastic_Language_TRADITIONAL_CHINESE+1)) #define meshtastic_DeviceUIConfig_theme_ENUMTYPE meshtastic_Theme #define meshtastic_DeviceUIConfig_language_ENUMTYPE meshtastic_Language @@ -114,10 +137,10 @@ extern "C" { /* Initializer values for message structs */ -#define meshtastic_DeviceUIConfig_init_default {0, 0, 0, _meshtastic_Theme_MIN, 0, _meshtastic_Language_MIN, false, meshtastic_NodeFilter_init_default, false, meshtastic_NodeHighlight_init_default} +#define meshtastic_DeviceUIConfig_init_default {0, 0, 0, 0, 0, 0, _meshtastic_Theme_MIN, 0, 0, 0, _meshtastic_Language_MIN, false, meshtastic_NodeFilter_init_default, false, meshtastic_NodeHighlight_init_default, {0, {0}}} #define meshtastic_NodeFilter_init_default {0, 0, 0, 0, 0, ""} #define meshtastic_NodeHighlight_init_default {0, 0, 0, 0, ""} -#define meshtastic_DeviceUIConfig_init_zero {0, 0, 0, _meshtastic_Theme_MIN, 0, _meshtastic_Language_MIN, false, meshtastic_NodeFilter_init_zero, false, meshtastic_NodeHighlight_init_zero} +#define meshtastic_DeviceUIConfig_init_zero {0, 0, 0, 0, 0, 0, _meshtastic_Theme_MIN, 0, 0, 0, _meshtastic_Language_MIN, false, meshtastic_NodeFilter_init_zero, false, meshtastic_NodeHighlight_init_zero, {0, {0}}} #define meshtastic_NodeFilter_init_zero {0, 0, 0, 0, 0, ""} #define meshtastic_NodeHighlight_init_zero {0, 0, 0, 0, ""} @@ -133,25 +156,37 @@ extern "C" { #define meshtastic_NodeHighlight_telemetry_switch_tag 3 #define meshtastic_NodeHighlight_iaq_switch_tag 4 #define meshtastic_NodeHighlight_node_name_tag 5 -#define meshtastic_DeviceUIConfig_screen_brightness_tag 1 -#define meshtastic_DeviceUIConfig_screen_timeout_tag 2 -#define meshtastic_DeviceUIConfig_screen_lock_tag 3 -#define meshtastic_DeviceUIConfig_theme_tag 4 -#define meshtastic_DeviceUIConfig_alert_enabled_tag 5 -#define meshtastic_DeviceUIConfig_language_tag 6 -#define meshtastic_DeviceUIConfig_node_filter_tag 7 -#define meshtastic_DeviceUIConfig_node_highlight_tag 8 +#define meshtastic_DeviceUIConfig_version_tag 1 +#define meshtastic_DeviceUIConfig_screen_brightness_tag 2 +#define meshtastic_DeviceUIConfig_screen_timeout_tag 3 +#define meshtastic_DeviceUIConfig_screen_lock_tag 4 +#define meshtastic_DeviceUIConfig_settings_lock_tag 5 +#define meshtastic_DeviceUIConfig_pin_code_tag 6 +#define meshtastic_DeviceUIConfig_theme_tag 7 +#define meshtastic_DeviceUIConfig_alert_enabled_tag 8 +#define meshtastic_DeviceUIConfig_banner_enabled_tag 9 +#define meshtastic_DeviceUIConfig_ring_tone_id_tag 10 +#define meshtastic_DeviceUIConfig_language_tag 11 +#define meshtastic_DeviceUIConfig_node_filter_tag 12 +#define meshtastic_DeviceUIConfig_node_highlight_tag 13 +#define meshtastic_DeviceUIConfig_calibration_data_tag 14 /* Struct field encoding specification for nanopb */ #define meshtastic_DeviceUIConfig_FIELDLIST(X, a) \ -X(a, STATIC, SINGULAR, UINT32, screen_brightness, 1) \ -X(a, STATIC, SINGULAR, UINT32, screen_timeout, 2) \ -X(a, STATIC, SINGULAR, BOOL, screen_lock, 3) \ -X(a, STATIC, SINGULAR, UENUM, theme, 4) \ -X(a, STATIC, SINGULAR, BOOL, alert_enabled, 5) \ -X(a, STATIC, SINGULAR, UENUM, language, 6) \ -X(a, STATIC, OPTIONAL, MESSAGE, node_filter, 7) \ -X(a, STATIC, OPTIONAL, MESSAGE, node_highlight, 8) +X(a, STATIC, SINGULAR, UINT32, version, 1) \ +X(a, STATIC, SINGULAR, UINT32, screen_brightness, 2) \ +X(a, STATIC, SINGULAR, UINT32, screen_timeout, 3) \ +X(a, STATIC, SINGULAR, BOOL, screen_lock, 4) \ +X(a, STATIC, SINGULAR, BOOL, settings_lock, 5) \ +X(a, STATIC, SINGULAR, UINT32, pin_code, 6) \ +X(a, STATIC, SINGULAR, UENUM, theme, 7) \ +X(a, STATIC, SINGULAR, BOOL, alert_enabled, 8) \ +X(a, STATIC, SINGULAR, BOOL, banner_enabled, 9) \ +X(a, STATIC, SINGULAR, UINT32, ring_tone_id, 10) \ +X(a, STATIC, SINGULAR, UENUM, language, 11) \ +X(a, STATIC, OPTIONAL, MESSAGE, node_filter, 12) \ +X(a, STATIC, OPTIONAL, MESSAGE, node_highlight, 13) \ +X(a, STATIC, SINGULAR, BYTES, calibration_data, 14) #define meshtastic_DeviceUIConfig_CALLBACK NULL #define meshtastic_DeviceUIConfig_DEFAULT NULL #define meshtastic_DeviceUIConfig_node_filter_MSGTYPE meshtastic_NodeFilter @@ -187,7 +222,7 @@ extern const pb_msgdesc_t meshtastic_NodeHighlight_msg; /* Maximum encoded size of messages (where known) */ #define MESHTASTIC_MESHTASTIC_DEVICE_UI_PB_H_MAX_SIZE meshtastic_DeviceUIConfig_size -#define meshtastic_DeviceUIConfig_size 80 +#define meshtastic_DeviceUIConfig_size 117 #define meshtastic_NodeFilter_size 36 #define meshtastic_NodeHighlight_size 25 diff --git a/src/mesh/generated/meshtastic/deviceonly.pb.cpp b/src/mesh/generated/meshtastic/deviceonly.pb.cpp index 92853f00d..aa020467a 100644 --- a/src/mesh/generated/meshtastic/deviceonly.pb.cpp +++ b/src/mesh/generated/meshtastic/deviceonly.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/deviceonly.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/deviceonly.pb.h b/src/mesh/generated/meshtastic/deviceonly.pb.h index a90e72244..c0a0fee91 100644 --- a/src/mesh/generated/meshtastic/deviceonly.pb.h +++ b/src/mesh/generated/meshtastic/deviceonly.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_INCLUDED @@ -81,12 +81,17 @@ typedef struct _meshtastic_NodeInfoLite { uint8_t channel; /* True if we witnessed the node over MQTT instead of LoRA transport */ bool via_mqtt; - /* Number of hops away from us this node is (0 if adjacent) */ + /* Number of hops away from us this node is (0 if direct neighbor) */ bool has_hops_away; uint8_t hops_away; /* True if node is in our favorites list Persists between NodeDB internal clean ups */ bool is_favorite; + /* True if node is in our ignored list + Persists between NodeDB internal clean ups */ + bool is_ignored; + /* Last byte of the node number of the node that should be used as the next hop to reach this node. */ + uint8_t next_hop; } meshtastic_NodeInfoLite; /* This message is never sent over the wire, but it is used for serializing DB @@ -150,12 +155,12 @@ extern "C" { /* Initializer values for message structs */ #define meshtastic_PositionLite_init_default {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN} #define meshtastic_UserLite_init_default {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}} -#define meshtastic_NodeInfoLite_init_default {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0} +#define meshtastic_NodeInfoLite_init_default {0, false, meshtastic_UserLite_init_default, false, meshtastic_PositionLite_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0, 0} #define meshtastic_DeviceState_init_default {false, meshtastic_MyNodeInfo_init_default, false, meshtastic_User_init_default, 0, {meshtastic_MeshPacket_init_default}, false, meshtastic_MeshPacket_init_default, 0, 0, 0, false, meshtastic_MeshPacket_init_default, 0, {meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default, meshtastic_NodeRemoteHardwarePin_init_default}, {0}} #define meshtastic_ChannelFile_init_default {0, {meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default, meshtastic_Channel_init_default}, 0} #define meshtastic_PositionLite_init_zero {0, 0, 0, 0, _meshtastic_Position_LocSource_MIN} #define meshtastic_UserLite_init_zero {{0}, "", "", _meshtastic_HardwareModel_MIN, 0, _meshtastic_Config_DeviceConfig_Role_MIN, {0, {0}}} -#define meshtastic_NodeInfoLite_init_zero {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0} +#define meshtastic_NodeInfoLite_init_zero {0, false, meshtastic_UserLite_init_zero, false, meshtastic_PositionLite_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0, 0} #define meshtastic_DeviceState_init_zero {false, meshtastic_MyNodeInfo_init_zero, false, meshtastic_User_init_zero, 0, {meshtastic_MeshPacket_init_zero}, false, meshtastic_MeshPacket_init_zero, 0, 0, 0, false, meshtastic_MeshPacket_init_zero, 0, {meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero, meshtastic_NodeRemoteHardwarePin_init_zero}, {0}} #define meshtastic_ChannelFile_init_zero {0, {meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero, meshtastic_Channel_init_zero}, 0} @@ -182,6 +187,8 @@ extern "C" { #define meshtastic_NodeInfoLite_via_mqtt_tag 8 #define meshtastic_NodeInfoLite_hops_away_tag 9 #define meshtastic_NodeInfoLite_is_favorite_tag 10 +#define meshtastic_NodeInfoLite_is_ignored_tag 11 +#define meshtastic_NodeInfoLite_next_hop_tag 12 #define meshtastic_DeviceState_my_node_tag 2 #define meshtastic_DeviceState_owner_tag 3 #define meshtastic_DeviceState_receive_queue_tag 5 @@ -226,7 +233,9 @@ X(a, STATIC, OPTIONAL, MESSAGE, device_metrics, 6) \ X(a, STATIC, SINGULAR, UINT32, channel, 7) \ X(a, STATIC, SINGULAR, BOOL, via_mqtt, 8) \ X(a, STATIC, OPTIONAL, UINT32, hops_away, 9) \ -X(a, STATIC, SINGULAR, BOOL, is_favorite, 10) +X(a, STATIC, SINGULAR, BOOL, is_favorite, 10) \ +X(a, STATIC, SINGULAR, BOOL, is_ignored, 11) \ +X(a, STATIC, SINGULAR, UINT32, next_hop, 12) #define meshtastic_NodeInfoLite_CALLBACK NULL #define meshtastic_NodeInfoLite_DEFAULT NULL #define meshtastic_NodeInfoLite_user_MSGTYPE meshtastic_UserLite @@ -279,7 +288,7 @@ extern const pb_msgdesc_t meshtastic_ChannelFile_msg; /* meshtastic_DeviceState_size depends on runtime parameters */ #define MESHTASTIC_MESHTASTIC_DEVICEONLY_PB_H_MAX_SIZE meshtastic_ChannelFile_size #define meshtastic_ChannelFile_size 718 -#define meshtastic_NodeInfoLite_size 183 +#define meshtastic_NodeInfoLite_size 188 #define meshtastic_PositionLite_size 28 #define meshtastic_UserLite_size 96 diff --git a/src/mesh/generated/meshtastic/localonly.pb.cpp b/src/mesh/generated/meshtastic/localonly.pb.cpp index 0a752a5a8..34391df73 100644 --- a/src/mesh/generated/meshtastic/localonly.pb.cpp +++ b/src/mesh/generated/meshtastic/localonly.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/localonly.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/localonly.pb.h b/src/mesh/generated/meshtastic/localonly.pb.h index 6409aef74..30f70ed90 100644 --- a/src/mesh/generated/meshtastic/localonly.pb.h +++ b/src/mesh/generated/meshtastic/localonly.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_INCLUDED @@ -188,7 +188,7 @@ extern const pb_msgdesc_t meshtastic_LocalModuleConfig_msg; /* Maximum encoded size of messages (where known) */ #define MESHTASTIC_MESHTASTIC_LOCALONLY_PB_H_MAX_SIZE meshtastic_LocalConfig_size #define meshtastic_LocalConfig_size 735 -#define meshtastic_LocalModuleConfig_size 697 +#define meshtastic_LocalModuleConfig_size 699 #ifdef __cplusplus } /* extern "C" */ diff --git a/src/mesh/generated/meshtastic/mesh.pb.cpp b/src/mesh/generated/meshtastic/mesh.pb.cpp index a0c1e2e73..6c5c7a4be 100644 --- a/src/mesh/generated/meshtastic/mesh.pb.cpp +++ b/src/mesh/generated/meshtastic/mesh.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/mesh.pb.h" #if PB_PROTO_HEADER_VERSION != 40 @@ -97,6 +97,8 @@ PB_BIND(meshtastic_ChunkedPayloadResponse, meshtastic_ChunkedPayloadResponse, AU + + diff --git a/src/mesh/generated/meshtastic/mesh.pb.h b/src/mesh/generated/meshtastic/mesh.pb.h index 313719d9b..5cd23c8e3 100644 --- a/src/mesh/generated/meshtastic/mesh.pb.h +++ b/src/mesh/generated/meshtastic/mesh.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_MESH_PB_H_INCLUDED @@ -212,6 +212,17 @@ typedef enum _meshtastic_HardwareModel { meshtastic_HardwareModel_MS24SF1 = 82, /* Lilygo TLora-C6 with the new ESP32-C6 MCU */ meshtastic_HardwareModel_TLORA_C6 = 83, + /* WisMesh Tap + RAK-4631 w/ TFT in injection modled case */ + meshtastic_HardwareModel_WISMESH_TAP = 84, + /* Similar to PORTDUINO but used by Routastic devices, this is not any + particular device and does not run Meshtastic's code but supports + the same frame format. + Runs on linux, see https://github.com/Jorropo/routastic */ + meshtastic_HardwareModel_ROUTASTIC = 85, + /* Mesh-Tab, esp32 based + https://github.com/valzzu/Mesh-Tab */ + meshtastic_HardwareModel_MESH_TAB = 86, /* ------------------------------------------------------------------------------------------------------------------------------------------ Reserved ID For developing private Ports. These will show up in live traffic sparsely, so we can use a high number. Keep it within 8 bits. ------------------------------------------------------------------------------------------------------------------------------------------ */ @@ -226,7 +237,7 @@ typedef enum _meshtastic_Constants { /* From mesh.options note: this payload length is ONLY the bytes that are sent inside of the Data protobuf (excluding protobuf overhead). The 16 byte header is outside of this envelope */ - meshtastic_Constants_DATA_PAYLOAD_LEN = 237 + meshtastic_Constants_DATA_PAYLOAD_LEN = 233 } meshtastic_Constants; /* Error codes for critical errors @@ -270,6 +281,40 @@ typedef enum _meshtastic_CriticalErrorCode { meshtastic_CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE = 13 } meshtastic_CriticalErrorCode; +/* Enum for modules excluded from a device's configuration. + Each value represents a ModuleConfigType that can be toggled as excluded + by setting its corresponding bit in the `excluded_modules` bitmask field. */ +typedef enum _meshtastic_ExcludedModules { + /* Default value of 0 indicates no modules are excluded. */ + meshtastic_ExcludedModules_EXCLUDED_NONE = 0, + /* MQTT module */ + meshtastic_ExcludedModules_MQTT_CONFIG = 1, + /* Serial module */ + meshtastic_ExcludedModules_SERIAL_CONFIG = 2, + /* External Notification module */ + meshtastic_ExcludedModules_EXTNOTIF_CONFIG = 4, + /* Store and Forward module */ + meshtastic_ExcludedModules_STOREFORWARD_CONFIG = 8, + /* Range Test module */ + meshtastic_ExcludedModules_RANGETEST_CONFIG = 16, + /* Telemetry module */ + meshtastic_ExcludedModules_TELEMETRY_CONFIG = 32, + /* Canned Message module */ + meshtastic_ExcludedModules_CANNEDMSG_CONFIG = 64, + /* Audio module */ + meshtastic_ExcludedModules_AUDIO_CONFIG = 128, + /* Remote Hardware module */ + meshtastic_ExcludedModules_REMOTEHARDWARE_CONFIG = 256, + /* Neighbor Info module */ + meshtastic_ExcludedModules_NEIGHBORINFO_CONFIG = 512, + /* Ambient Lighting module */ + meshtastic_ExcludedModules_AMBIENTLIGHTING_CONFIG = 1024, + /* Detection Sensor module */ + meshtastic_ExcludedModules_DETECTIONSENSOR_CONFIG = 2048, + /* Paxcounter module */ + meshtastic_ExcludedModules_PAXCOUNTER_CONFIG = 4096 +} meshtastic_ExcludedModules; + /* How the location was acquired: manual, onboard GPS, external (EUD) GPS */ typedef enum _meshtastic_Position_LocSource { /* TODO: REPLACE */ @@ -372,6 +417,8 @@ typedef enum _meshtastic_MeshPacket_Priority { meshtastic_MeshPacket_Priority_RESPONSE = 80, /* Higher priority for specific message types (portnums) to distinguish between other reliable packets. */ meshtastic_MeshPacket_Priority_HIGH = 100, + /* Higher priority alert message used for critical alerts which take priority over other reliable packets. */ + meshtastic_MeshPacket_Priority_ALERT = 110, /* Ack/naks are sent with very high priority to ensure that retransmission stops as soon as possible */ meshtastic_MeshPacket_Priority_ACK = 120, @@ -408,7 +455,7 @@ typedef enum _meshtastic_LogRecord_Level { } meshtastic_LogRecord_Level; /* Struct definitions */ -/* a gps position */ +/* A GPS Position */ typedef struct _meshtastic_Position { /* The new preferred location encoding, multiply by 1e-7 to get degrees in floating point */ @@ -566,7 +613,7 @@ typedef struct _meshtastic_Routing { }; } meshtastic_Routing; -typedef PB_BYTES_ARRAY_T(237) meshtastic_Data_payload_t; +typedef PB_BYTES_ARRAY_T(233) meshtastic_Data_payload_t; /* (Formerly called SubPacket) The payload portion fo a packet, this is the actual bytes that are sent inside a radio packet (because from/to are broken out by the comms library) */ @@ -686,7 +733,7 @@ typedef struct _meshtastic_MeshPacket { Set during reception to indicate the SNR of this packet. Used to collect statistics on current link quality. */ float rx_snr; - /* If unset treated as zero (no forwarding, send to adjacent nodes only) + /* If unset treated as zero (no forwarding, send to direct neighbor nodes only) if 1, allow hopping through one node, etc... For our usecase real world topologies probably have a max of about 3. This field is normally placed into a few of bits in the header. */ @@ -717,6 +764,16 @@ typedef struct _meshtastic_MeshPacket { meshtastic_MeshPacket_public_key_t public_key; /* Indicates whether the packet was en/decrypted using PKI */ bool pki_encrypted; + /* Last byte of the node number of the node that should be used as the next hop in routing. + Set by the firmware internally, clients are not supposed to set this. */ + uint8_t next_hop; + /* Last byte of the node number of the node that will relay/relayed this packet. + Set by the firmware internally, clients are not supposed to set this. */ + uint8_t relay_node; + /* *Never* sent over the radio links. + Timestamp after which this packet may be sent. + Set by the firmware internally, clients are not supposed to set this. */ + uint32_t tx_after; } meshtastic_MeshPacket; /* The bluetooth to device link: @@ -757,14 +814,18 @@ typedef struct _meshtastic_NodeInfo { uint8_t channel; /* True if we witnessed the node over MQTT instead of LoRA transport */ bool via_mqtt; - /* Number of hops away from us this node is (0 if adjacent) */ + /* Number of hops away from us this node is (0 if direct neighbor) */ bool has_hops_away; uint8_t hops_away; /* True if node is in our favorites list Persists between NodeDB internal clean ups */ bool is_favorite; + /* True if node is in our ignored list + Persists between NodeDB internal clean ups */ + bool is_ignored; } meshtastic_NodeInfo; +typedef PB_BYTES_ARRAY_T(16) meshtastic_MyNodeInfo_device_id_t; /* Unique local debugging info for this node Note: we don't include position or the user info, because that will come in the Sent to the phone in response to WantNodes. */ @@ -778,6 +839,10 @@ typedef struct _meshtastic_MyNodeInfo { /* The minimum app version that can talk to this device. Phone/PC apps should compare this to their build number and if too low tell the user they must update their app */ uint32_t min_app_version; + /* Unique hardware identifier for this device */ + meshtastic_MyNodeInfo_device_id_t device_id; + /* The PlatformIO environment used to build this firmware */ + char pio_env[40]; } meshtastic_MyNodeInfo; /* Debug output from the device. @@ -831,7 +896,7 @@ typedef struct _meshtastic_FileInfo { uint32_t size_bytes; } meshtastic_FileInfo; -typedef PB_BYTES_ARRAY_T(237) meshtastic_Compressed_data_t; +typedef PB_BYTES_ARRAY_T(233) meshtastic_Compressed_data_t; /* Compressed message payload */ typedef struct _meshtastic_Compressed { /* PortNum to determine the how to handle the compressed payload. */ @@ -891,6 +956,9 @@ typedef struct _meshtastic_DeviceMetadata { bool hasRemoteHardware; /* Has PKC capabilities */ bool hasPKC; + /* Bit field of boolean for excluded modules + (bitwise OR of ExcludedModules) */ + uint32_t excluded_modules; } meshtastic_DeviceMetadata; /* Packets from the radio to the phone will appear on the fromRadio characteristic. @@ -1039,6 +1107,10 @@ extern "C" { #define _meshtastic_CriticalErrorCode_MAX meshtastic_CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE #define _meshtastic_CriticalErrorCode_ARRAYSIZE ((meshtastic_CriticalErrorCode)(meshtastic_CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE+1)) +#define _meshtastic_ExcludedModules_MIN meshtastic_ExcludedModules_EXCLUDED_NONE +#define _meshtastic_ExcludedModules_MAX meshtastic_ExcludedModules_PAXCOUNTER_CONFIG +#define _meshtastic_ExcludedModules_ARRAYSIZE ((meshtastic_ExcludedModules)(meshtastic_ExcludedModules_PAXCOUNTER_CONFIG+1)) + #define _meshtastic_Position_LocSource_MIN meshtastic_Position_LocSource_LOC_UNSET #define _meshtastic_Position_LocSource_MAX meshtastic_Position_LocSource_LOC_EXTERNAL #define _meshtastic_Position_LocSource_ARRAYSIZE ((meshtastic_Position_LocSource)(meshtastic_Position_LocSource_LOC_EXTERNAL+1)) @@ -1110,9 +1182,9 @@ extern "C" { #define meshtastic_Data_init_default {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0} #define meshtastic_Waypoint_init_default {0, false, 0, false, 0, 0, 0, "", "", 0} #define meshtastic_MqttClientProxyMessage_init_default {"", 0, {{0, {0}}}, 0} -#define meshtastic_MeshPacket_init_default {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0} -#define meshtastic_NodeInfo_init_default {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0} -#define meshtastic_MyNodeInfo_init_default {0, 0, 0} +#define meshtastic_MeshPacket_init_default {0, 0, 0, 0, {meshtastic_Data_init_default}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0} +#define meshtastic_NodeInfo_init_default {0, false, meshtastic_User_init_default, false, meshtastic_Position_init_default, 0, 0, false, meshtastic_DeviceMetrics_init_default, 0, 0, false, 0, 0, 0} +#define meshtastic_MyNodeInfo_init_default {0, 0, 0, {0, {0}}, ""} #define meshtastic_LogRecord_init_default {"", 0, "", _meshtastic_LogRecord_Level_MIN} #define meshtastic_QueueStatus_init_default {0, 0, 0, 0} #define meshtastic_FromRadio_init_default {0, 0, {meshtastic_MeshPacket_init_default}} @@ -1122,7 +1194,7 @@ extern "C" { #define meshtastic_Compressed_init_default {_meshtastic_PortNum_MIN, {0, {0}}} #define meshtastic_NeighborInfo_init_default {0, 0, 0, 0, {meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default, meshtastic_Neighbor_init_default}} #define meshtastic_Neighbor_init_default {0, 0, 0, 0} -#define meshtastic_DeviceMetadata_init_default {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0} +#define meshtastic_DeviceMetadata_init_default {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0, 0} #define meshtastic_Heartbeat_init_default {0} #define meshtastic_NodeRemoteHardwarePin_init_default {0, false, meshtastic_RemoteHardwarePin_init_default} #define meshtastic_ChunkedPayload_init_default {0, 0, 0, {0, {0}}} @@ -1135,9 +1207,9 @@ extern "C" { #define meshtastic_Data_init_zero {_meshtastic_PortNum_MIN, {0, {0}}, 0, 0, 0, 0, 0, 0, false, 0} #define meshtastic_Waypoint_init_zero {0, false, 0, false, 0, 0, 0, "", "", 0} #define meshtastic_MqttClientProxyMessage_init_zero {"", 0, {{0, {0}}}, 0} -#define meshtastic_MeshPacket_init_zero {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0} -#define meshtastic_NodeInfo_init_zero {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0} -#define meshtastic_MyNodeInfo_init_zero {0, 0, 0} +#define meshtastic_MeshPacket_init_zero {0, 0, 0, 0, {meshtastic_Data_init_zero}, 0, 0, 0, 0, 0, _meshtastic_MeshPacket_Priority_MIN, 0, _meshtastic_MeshPacket_Delayed_MIN, 0, 0, {0, {0}}, 0, 0, 0, 0} +#define meshtastic_NodeInfo_init_zero {0, false, meshtastic_User_init_zero, false, meshtastic_Position_init_zero, 0, 0, false, meshtastic_DeviceMetrics_init_zero, 0, 0, false, 0, 0, 0} +#define meshtastic_MyNodeInfo_init_zero {0, 0, 0, {0, {0}}, ""} #define meshtastic_LogRecord_init_zero {"", 0, "", _meshtastic_LogRecord_Level_MIN} #define meshtastic_QueueStatus_init_zero {0, 0, 0, 0} #define meshtastic_FromRadio_init_zero {0, 0, {meshtastic_MeshPacket_init_zero}} @@ -1147,7 +1219,7 @@ extern "C" { #define meshtastic_Compressed_init_zero {_meshtastic_PortNum_MIN, {0, {0}}} #define meshtastic_NeighborInfo_init_zero {0, 0, 0, 0, {meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero, meshtastic_Neighbor_init_zero}} #define meshtastic_Neighbor_init_zero {0, 0, 0, 0} -#define meshtastic_DeviceMetadata_init_zero {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0} +#define meshtastic_DeviceMetadata_init_zero {"", 0, 0, 0, 0, 0, _meshtastic_Config_DeviceConfig_Role_MIN, 0, _meshtastic_HardwareModel_MIN, 0, 0, 0} #define meshtastic_Heartbeat_init_zero {0} #define meshtastic_NodeRemoteHardwarePin_init_zero {0, false, meshtastic_RemoteHardwarePin_init_zero} #define meshtastic_ChunkedPayload_init_zero {0, 0, 0, {0, {0}}} @@ -1231,6 +1303,9 @@ extern "C" { #define meshtastic_MeshPacket_hop_start_tag 15 #define meshtastic_MeshPacket_public_key_tag 16 #define meshtastic_MeshPacket_pki_encrypted_tag 17 +#define meshtastic_MeshPacket_next_hop_tag 18 +#define meshtastic_MeshPacket_relay_node_tag 19 +#define meshtastic_MeshPacket_tx_after_tag 20 #define meshtastic_NodeInfo_num_tag 1 #define meshtastic_NodeInfo_user_tag 2 #define meshtastic_NodeInfo_position_tag 3 @@ -1241,9 +1316,12 @@ extern "C" { #define meshtastic_NodeInfo_via_mqtt_tag 8 #define meshtastic_NodeInfo_hops_away_tag 9 #define meshtastic_NodeInfo_is_favorite_tag 10 +#define meshtastic_NodeInfo_is_ignored_tag 11 #define meshtastic_MyNodeInfo_my_node_num_tag 1 #define meshtastic_MyNodeInfo_reboot_count_tag 8 #define meshtastic_MyNodeInfo_min_app_version_tag 11 +#define meshtastic_MyNodeInfo_device_id_tag 12 +#define meshtastic_MyNodeInfo_pio_env_tag 13 #define meshtastic_LogRecord_message_tag 1 #define meshtastic_LogRecord_time_tag 2 #define meshtastic_LogRecord_source_tag 3 @@ -1279,6 +1357,7 @@ extern "C" { #define meshtastic_DeviceMetadata_hw_model_tag 9 #define meshtastic_DeviceMetadata_hasRemoteHardware_tag 10 #define meshtastic_DeviceMetadata_hasPKC_tag 11 +#define meshtastic_DeviceMetadata_excluded_modules_tag 12 #define meshtastic_FromRadio_id_tag 1 #define meshtastic_FromRadio_packet_tag 2 #define meshtastic_FromRadio_my_info_tag 3 @@ -1421,7 +1500,10 @@ X(a, STATIC, SINGULAR, UENUM, delayed, 13) \ X(a, STATIC, SINGULAR, BOOL, via_mqtt, 14) \ X(a, STATIC, SINGULAR, UINT32, hop_start, 15) \ X(a, STATIC, SINGULAR, BYTES, public_key, 16) \ -X(a, STATIC, SINGULAR, BOOL, pki_encrypted, 17) +X(a, STATIC, SINGULAR, BOOL, pki_encrypted, 17) \ +X(a, STATIC, SINGULAR, UINT32, next_hop, 18) \ +X(a, STATIC, SINGULAR, UINT32, relay_node, 19) \ +X(a, STATIC, SINGULAR, UINT32, tx_after, 20) #define meshtastic_MeshPacket_CALLBACK NULL #define meshtastic_MeshPacket_DEFAULT NULL #define meshtastic_MeshPacket_payload_variant_decoded_MSGTYPE meshtastic_Data @@ -1436,7 +1518,8 @@ X(a, STATIC, OPTIONAL, MESSAGE, device_metrics, 6) \ X(a, STATIC, SINGULAR, UINT32, channel, 7) \ X(a, STATIC, SINGULAR, BOOL, via_mqtt, 8) \ X(a, STATIC, OPTIONAL, UINT32, hops_away, 9) \ -X(a, STATIC, SINGULAR, BOOL, is_favorite, 10) +X(a, STATIC, SINGULAR, BOOL, is_favorite, 10) \ +X(a, STATIC, SINGULAR, BOOL, is_ignored, 11) #define meshtastic_NodeInfo_CALLBACK NULL #define meshtastic_NodeInfo_DEFAULT NULL #define meshtastic_NodeInfo_user_MSGTYPE meshtastic_User @@ -1446,7 +1529,9 @@ X(a, STATIC, SINGULAR, BOOL, is_favorite, 10) #define meshtastic_MyNodeInfo_FIELDLIST(X, a) \ X(a, STATIC, SINGULAR, UINT32, my_node_num, 1) \ X(a, STATIC, SINGULAR, UINT32, reboot_count, 8) \ -X(a, STATIC, SINGULAR, UINT32, min_app_version, 11) +X(a, STATIC, SINGULAR, UINT32, min_app_version, 11) \ +X(a, STATIC, SINGULAR, BYTES, device_id, 12) \ +X(a, STATIC, SINGULAR, STRING, pio_env, 13) #define meshtastic_MyNodeInfo_CALLBACK NULL #define meshtastic_MyNodeInfo_DEFAULT NULL @@ -1563,7 +1648,8 @@ X(a, STATIC, SINGULAR, UENUM, role, 7) \ X(a, STATIC, SINGULAR, UINT32, position_flags, 8) \ X(a, STATIC, SINGULAR, UENUM, hw_model, 9) \ X(a, STATIC, SINGULAR, BOOL, hasRemoteHardware, 10) \ -X(a, STATIC, SINGULAR, BOOL, hasPKC, 11) +X(a, STATIC, SINGULAR, BOOL, hasPKC, 11) \ +X(a, STATIC, SINGULAR, UINT32, excluded_modules, 12) #define meshtastic_DeviceMetadata_CALLBACK NULL #define meshtastic_DeviceMetadata_DEFAULT NULL @@ -1660,19 +1746,19 @@ extern const pb_msgdesc_t meshtastic_ChunkedPayloadResponse_msg; #define MESHTASTIC_MESHTASTIC_MESH_PB_H_MAX_SIZE meshtastic_FromRadio_size #define meshtastic_ChunkedPayload_size 245 #define meshtastic_ClientNotification_size 415 -#define meshtastic_Compressed_size 243 -#define meshtastic_Data_size 273 -#define meshtastic_DeviceMetadata_size 48 +#define meshtastic_Compressed_size 239 +#define meshtastic_Data_size 269 +#define meshtastic_DeviceMetadata_size 54 #define meshtastic_FileInfo_size 236 #define meshtastic_FromRadio_size 510 #define meshtastic_Heartbeat_size 0 #define meshtastic_LogRecord_size 426 -#define meshtastic_MeshPacket_size 367 +#define meshtastic_MeshPacket_size 378 #define meshtastic_MqttClientProxyMessage_size 501 -#define meshtastic_MyNodeInfo_size 18 +#define meshtastic_MyNodeInfo_size 77 #define meshtastic_NeighborInfo_size 258 #define meshtastic_Neighbor_size 22 -#define meshtastic_NodeInfo_size 317 +#define meshtastic_NodeInfo_size 319 #define meshtastic_NodeRemoteHardwarePin_size 29 #define meshtastic_Position_size 144 #define meshtastic_QueueStatus_size 23 diff --git a/src/mesh/generated/meshtastic/module_config.pb.cpp b/src/mesh/generated/meshtastic/module_config.pb.cpp index c40041eab..9843f0e91 100644 --- a/src/mesh/generated/meshtastic/module_config.pb.cpp +++ b/src/mesh/generated/meshtastic/module_config.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/module_config.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/module_config.pb.h b/src/mesh/generated/meshtastic/module_config.pb.h index 32d5ded23..697b965c5 100644 --- a/src/mesh/generated/meshtastic/module_config.pb.h +++ b/src/mesh/generated/meshtastic/module_config.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_MODULE_CONFIG_PB_H_INCLUDED @@ -153,8 +153,11 @@ typedef struct _meshtastic_ModuleConfig_NeighborInfoConfig { /* Whether the Module is enabled */ bool enabled; /* Interval in seconds of how often we should try to send our - Neighbor Info to the mesh */ + Neighbor Info (minimum is 14400, i.e., 4 hours) */ uint32_t update_interval; + /* Whether in addition to sending it to MQTT and the PhoneAPI, our NeighborInfo should be transmitted over LoRa. + Note that this is not available on a channel with default key and name. */ + bool transmit_over_lora; } meshtastic_ModuleConfig_NeighborInfoConfig; /* Detection Sensor Module Config */ @@ -501,7 +504,7 @@ extern "C" { #define meshtastic_ModuleConfig_MQTTConfig_init_default {0, "", "", "", 0, 0, 0, "", 0, 0, false, meshtastic_ModuleConfig_MapReportSettings_init_default} #define meshtastic_ModuleConfig_MapReportSettings_init_default {0, 0} #define meshtastic_ModuleConfig_RemoteHardwareConfig_init_default {0, 0, 0, {meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default, meshtastic_RemoteHardwarePin_init_default}} -#define meshtastic_ModuleConfig_NeighborInfoConfig_init_default {0, 0} +#define meshtastic_ModuleConfig_NeighborInfoConfig_init_default {0, 0, 0} #define meshtastic_ModuleConfig_DetectionSensorConfig_init_default {0, 0, 0, 0, "", 0, _meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_MIN, 0} #define meshtastic_ModuleConfig_AudioConfig_init_default {0, 0, _meshtastic_ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0} #define meshtastic_ModuleConfig_PaxcounterConfig_init_default {0, 0, 0, 0} @@ -517,7 +520,7 @@ extern "C" { #define meshtastic_ModuleConfig_MQTTConfig_init_zero {0, "", "", "", 0, 0, 0, "", 0, 0, false, meshtastic_ModuleConfig_MapReportSettings_init_zero} #define meshtastic_ModuleConfig_MapReportSettings_init_zero {0, 0} #define meshtastic_ModuleConfig_RemoteHardwareConfig_init_zero {0, 0, 0, {meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero, meshtastic_RemoteHardwarePin_init_zero}} -#define meshtastic_ModuleConfig_NeighborInfoConfig_init_zero {0, 0} +#define meshtastic_ModuleConfig_NeighborInfoConfig_init_zero {0, 0, 0} #define meshtastic_ModuleConfig_DetectionSensorConfig_init_zero {0, 0, 0, 0, "", 0, _meshtastic_ModuleConfig_DetectionSensorConfig_TriggerType_MIN, 0} #define meshtastic_ModuleConfig_AudioConfig_init_zero {0, 0, _meshtastic_ModuleConfig_AudioConfig_Audio_Baud_MIN, 0, 0, 0, 0} #define meshtastic_ModuleConfig_PaxcounterConfig_init_zero {0, 0, 0, 0} @@ -546,6 +549,7 @@ extern "C" { #define meshtastic_ModuleConfig_MQTTConfig_map_report_settings_tag 11 #define meshtastic_ModuleConfig_NeighborInfoConfig_enabled_tag 1 #define meshtastic_ModuleConfig_NeighborInfoConfig_update_interval_tag 2 +#define meshtastic_ModuleConfig_NeighborInfoConfig_transmit_over_lora_tag 3 #define meshtastic_ModuleConfig_DetectionSensorConfig_enabled_tag 1 #define meshtastic_ModuleConfig_DetectionSensorConfig_minimum_broadcast_secs_tag 2 #define meshtastic_ModuleConfig_DetectionSensorConfig_state_broadcast_secs_tag 3 @@ -709,7 +713,8 @@ X(a, STATIC, REPEATED, MESSAGE, available_pins, 3) #define meshtastic_ModuleConfig_NeighborInfoConfig_FIELDLIST(X, a) \ X(a, STATIC, SINGULAR, BOOL, enabled, 1) \ -X(a, STATIC, SINGULAR, UINT32, update_interval, 2) +X(a, STATIC, SINGULAR, UINT32, update_interval, 2) \ +X(a, STATIC, SINGULAR, BOOL, transmit_over_lora, 3) #define meshtastic_ModuleConfig_NeighborInfoConfig_CALLBACK NULL #define meshtastic_ModuleConfig_NeighborInfoConfig_DEFAULT NULL @@ -884,7 +889,7 @@ extern const pb_msgdesc_t meshtastic_RemoteHardwarePin_msg; #define meshtastic_ModuleConfig_ExternalNotificationConfig_size 42 #define meshtastic_ModuleConfig_MQTTConfig_size 254 #define meshtastic_ModuleConfig_MapReportSettings_size 12 -#define meshtastic_ModuleConfig_NeighborInfoConfig_size 8 +#define meshtastic_ModuleConfig_NeighborInfoConfig_size 10 #define meshtastic_ModuleConfig_PaxcounterConfig_size 30 #define meshtastic_ModuleConfig_RangeTestConfig_size 10 #define meshtastic_ModuleConfig_RemoteHardwareConfig_size 96 diff --git a/src/mesh/generated/meshtastic/mqtt.pb.cpp b/src/mesh/generated/meshtastic/mqtt.pb.cpp index 74536cb79..2c32ef2e4 100644 --- a/src/mesh/generated/meshtastic/mqtt.pb.cpp +++ b/src/mesh/generated/meshtastic/mqtt.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/mqtt.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/mqtt.pb.h b/src/mesh/generated/meshtastic/mqtt.pb.h index 4d1027374..1726bc470 100644 --- a/src/mesh/generated/meshtastic/mqtt.pb.h +++ b/src/mesh/generated/meshtastic/mqtt.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_MQTT_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/paxcount.pb.cpp b/src/mesh/generated/meshtastic/paxcount.pb.cpp index 403288147..ff738bde9 100644 --- a/src/mesh/generated/meshtastic/paxcount.pb.cpp +++ b/src/mesh/generated/meshtastic/paxcount.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/paxcount.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/paxcount.pb.h b/src/mesh/generated/meshtastic/paxcount.pb.h index b6b51fdd5..06078aef7 100644 --- a/src/mesh/generated/meshtastic/paxcount.pb.h +++ b/src/mesh/generated/meshtastic/paxcount.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_PAXCOUNT_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/portnums.pb.cpp b/src/mesh/generated/meshtastic/portnums.pb.cpp index 8fca9af79..15a6ba372 100644 --- a/src/mesh/generated/meshtastic/portnums.pb.cpp +++ b/src/mesh/generated/meshtastic/portnums.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/portnums.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/portnums.pb.h b/src/mesh/generated/meshtastic/portnums.pb.h index df6cf32c2..d7dc47785 100644 --- a/src/mesh/generated/meshtastic/portnums.pb.h +++ b/src/mesh/generated/meshtastic/portnums.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_PORTNUMS_PB_H_INCLUDED @@ -72,6 +72,8 @@ typedef enum _meshtastic_PortNum { /* Same as Text Message but originating from Detection Sensor Module. NOTE: This portnum traffic is not sent to the public MQTT starting at firmware version 2.2.9 */ meshtastic_PortNum_DETECTION_SENSOR_APP = 10, + /* Same as Text Message but used for critical alerts. */ + meshtastic_PortNum_ALERT_APP = 11, /* Provides a 'ping' service that replies to any packet it receives. Also serves as a small example module. ENCODING: ASCII Plaintext */ diff --git a/src/mesh/generated/meshtastic/powermon.pb.cpp b/src/mesh/generated/meshtastic/powermon.pb.cpp index 6a9b7551a..8838e165f 100644 --- a/src/mesh/generated/meshtastic/powermon.pb.cpp +++ b/src/mesh/generated/meshtastic/powermon.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/powermon.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/powermon.pb.h b/src/mesh/generated/meshtastic/powermon.pb.h index 5add85b85..9d4d94193 100644 --- a/src/mesh/generated/meshtastic/powermon.pb.h +++ b/src/mesh/generated/meshtastic/powermon.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_POWERMON_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_POWERMON_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/remote_hardware.pb.cpp b/src/mesh/generated/meshtastic/remote_hardware.pb.cpp index 239950e7e..8942104b5 100644 --- a/src/mesh/generated/meshtastic/remote_hardware.pb.cpp +++ b/src/mesh/generated/meshtastic/remote_hardware.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/remote_hardware.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/remote_hardware.pb.h b/src/mesh/generated/meshtastic/remote_hardware.pb.h index ade250e93..9ab3413c3 100644 --- a/src/mesh/generated/meshtastic/remote_hardware.pb.h +++ b/src/mesh/generated/meshtastic/remote_hardware.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_REMOTE_HARDWARE_PB_H_INCLUDED diff --git a/src/mesh/generated/meshtastic/rtttl.pb.cpp b/src/mesh/generated/meshtastic/rtttl.pb.cpp index 61ad8b73f..c994741f3 100644 --- a/src/mesh/generated/meshtastic/rtttl.pb.cpp +++ b/src/mesh/generated/meshtastic/rtttl.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/rtttl.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/rtttl.pb.h b/src/mesh/generated/meshtastic/rtttl.pb.h index 2b7e35f11..b6e152dbf 100644 --- a/src/mesh/generated/meshtastic/rtttl.pb.h +++ b/src/mesh/generated/meshtastic/rtttl.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_RTTTL_PB_H_INCLUDED @@ -13,7 +13,7 @@ /* Canned message module configuration. */ typedef struct _meshtastic_RTTTLConfig { /* Ringtone for PWM Buzzer in RTTTL Format. */ - char ringtone[230]; + char ringtone[231]; } meshtastic_RTTTLConfig; @@ -41,7 +41,7 @@ extern const pb_msgdesc_t meshtastic_RTTTLConfig_msg; /* Maximum encoded size of messages (where known) */ #define MESHTASTIC_MESHTASTIC_RTTTL_PB_H_MAX_SIZE meshtastic_RTTTLConfig_size -#define meshtastic_RTTTLConfig_size 232 +#define meshtastic_RTTTLConfig_size 233 #ifdef __cplusplus } /* extern "C" */ diff --git a/src/mesh/generated/meshtastic/storeforward.pb.cpp b/src/mesh/generated/meshtastic/storeforward.pb.cpp index 71a232bf6..82db566a1 100644 --- a/src/mesh/generated/meshtastic/storeforward.pb.cpp +++ b/src/mesh/generated/meshtastic/storeforward.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/storeforward.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/storeforward.pb.h b/src/mesh/generated/meshtastic/storeforward.pb.h index 71f2fcad5..75cff5205 100644 --- a/src/mesh/generated/meshtastic/storeforward.pb.h +++ b/src/mesh/generated/meshtastic/storeforward.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_STOREFORWARD_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_STOREFORWARD_PB_H_INCLUDED @@ -91,7 +91,7 @@ typedef struct _meshtastic_StoreAndForward_Heartbeat { uint32_t secondary; } meshtastic_StoreAndForward_Heartbeat; -typedef PB_BYTES_ARRAY_T(237) meshtastic_StoreAndForward_text_t; +typedef PB_BYTES_ARRAY_T(233) meshtastic_StoreAndForward_text_t; /* TODO: REPLACE */ typedef struct _meshtastic_StoreAndForward { /* TODO: REPLACE */ @@ -211,7 +211,7 @@ extern const pb_msgdesc_t meshtastic_StoreAndForward_Heartbeat_msg; #define meshtastic_StoreAndForward_Heartbeat_size 12 #define meshtastic_StoreAndForward_History_size 18 #define meshtastic_StoreAndForward_Statistics_size 50 -#define meshtastic_StoreAndForward_size 242 +#define meshtastic_StoreAndForward_size 238 #ifdef __cplusplus } /* extern "C" */ diff --git a/src/mesh/generated/meshtastic/telemetry.pb.cpp b/src/mesh/generated/meshtastic/telemetry.pb.cpp index f6d39da6e..c79941fa5 100644 --- a/src/mesh/generated/meshtastic/telemetry.pb.cpp +++ b/src/mesh/generated/meshtastic/telemetry.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/telemetry.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/telemetry.pb.h b/src/mesh/generated/meshtastic/telemetry.pb.h index 309c01dc7..85fe4bdc1 100644 --- a/src/mesh/generated/meshtastic/telemetry.pb.h +++ b/src/mesh/generated/meshtastic/telemetry.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_INCLUDED @@ -77,7 +77,11 @@ typedef enum _meshtastic_TelemetrySensorType { /* MLX90614 non-contact IR temperature sensor */ meshtastic_TelemetrySensorType_MLX90614 = 31, /* SCD40/SCD41 CO2, humidity, temperature sensor */ - meshtastic_TelemetrySensorType_SCD4X = 32 + meshtastic_TelemetrySensorType_SCD4X = 32, + /* ClimateGuard RadSens, radiation, Geiger-Muller Tube */ + meshtastic_TelemetrySensorType_RADSENS = 33, + /* High accuracy current and voltage */ + meshtastic_TelemetrySensorType_INA226 = 34 } meshtastic_TelemetrySensorType; /* Struct definitions */ @@ -155,6 +159,9 @@ typedef struct _meshtastic_EnvironmentMetrics { /* Wind lull in m/s */ bool has_wind_lull; float wind_lull; + /* Radiation in µR/h */ + bool has_radiation; + float radiation; } meshtastic_EnvironmentMetrics; /* Power Metrics (voltage / current / etc) */ @@ -299,8 +306,8 @@ extern "C" { /* Helper constants for enums */ #define _meshtastic_TelemetrySensorType_MIN meshtastic_TelemetrySensorType_SENSOR_UNSET -#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_SCD4X -#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_SCD4X+1)) +#define _meshtastic_TelemetrySensorType_MAX meshtastic_TelemetrySensorType_INA226 +#define _meshtastic_TelemetrySensorType_ARRAYSIZE ((meshtastic_TelemetrySensorType)(meshtastic_TelemetrySensorType_INA226+1)) @@ -313,7 +320,7 @@ extern "C" { /* Initializer values for message structs */ #define meshtastic_DeviceMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0} -#define meshtastic_EnvironmentMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} +#define meshtastic_EnvironmentMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_PowerMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_AirQualityMetrics_init_default {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_LocalStats_init_default {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} @@ -321,7 +328,7 @@ extern "C" { #define meshtastic_Telemetry_init_default {0, 0, {meshtastic_DeviceMetrics_init_default}} #define meshtastic_Nau7802Config_init_default {0, 0} #define meshtastic_DeviceMetrics_init_zero {false, 0, false, 0, false, 0, false, 0, false, 0} -#define meshtastic_EnvironmentMetrics_init_zero {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} +#define meshtastic_EnvironmentMetrics_init_zero {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_PowerMetrics_init_zero {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_AirQualityMetrics_init_zero {false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0, false, 0} #define meshtastic_LocalStats_init_zero {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} @@ -352,6 +359,7 @@ extern "C" { #define meshtastic_EnvironmentMetrics_weight_tag 15 #define meshtastic_EnvironmentMetrics_wind_gust_tag 16 #define meshtastic_EnvironmentMetrics_wind_lull_tag 17 +#define meshtastic_EnvironmentMetrics_radiation_tag 18 #define meshtastic_PowerMetrics_ch1_voltage_tag 1 #define meshtastic_PowerMetrics_ch1_current_tag 2 #define meshtastic_PowerMetrics_ch2_voltage_tag 3 @@ -422,7 +430,8 @@ X(a, STATIC, OPTIONAL, UINT32, wind_direction, 13) \ X(a, STATIC, OPTIONAL, FLOAT, wind_speed, 14) \ X(a, STATIC, OPTIONAL, FLOAT, weight, 15) \ X(a, STATIC, OPTIONAL, FLOAT, wind_gust, 16) \ -X(a, STATIC, OPTIONAL, FLOAT, wind_lull, 17) +X(a, STATIC, OPTIONAL, FLOAT, wind_lull, 17) \ +X(a, STATIC, OPTIONAL, FLOAT, radiation, 18) #define meshtastic_EnvironmentMetrics_CALLBACK NULL #define meshtastic_EnvironmentMetrics_DEFAULT NULL @@ -521,12 +530,12 @@ extern const pb_msgdesc_t meshtastic_Nau7802Config_msg; #define MESHTASTIC_MESHTASTIC_TELEMETRY_PB_H_MAX_SIZE meshtastic_Telemetry_size #define meshtastic_AirQualityMetrics_size 78 #define meshtastic_DeviceMetrics_size 27 -#define meshtastic_EnvironmentMetrics_size 85 +#define meshtastic_EnvironmentMetrics_size 91 #define meshtastic_HealthMetrics_size 11 #define meshtastic_LocalStats_size 60 #define meshtastic_Nau7802Config_size 16 #define meshtastic_PowerMetrics_size 30 -#define meshtastic_Telemetry_size 92 +#define meshtastic_Telemetry_size 98 #ifdef __cplusplus } /* extern "C" */ diff --git a/src/mesh/generated/meshtastic/xmodem.pb.cpp b/src/mesh/generated/meshtastic/xmodem.pb.cpp index 3960ccdaa..09ae41d35 100644 --- a/src/mesh/generated/meshtastic/xmodem.pb.cpp +++ b/src/mesh/generated/meshtastic/xmodem.pb.cpp @@ -1,5 +1,5 @@ /* Automatically generated nanopb constant definitions */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #include "meshtastic/xmodem.pb.h" #if PB_PROTO_HEADER_VERSION != 40 diff --git a/src/mesh/generated/meshtastic/xmodem.pb.h b/src/mesh/generated/meshtastic/xmodem.pb.h index 76edc0df6..3410fda0f 100644 --- a/src/mesh/generated/meshtastic/xmodem.pb.h +++ b/src/mesh/generated/meshtastic/xmodem.pb.h @@ -1,5 +1,5 @@ /* Automatically generated nanopb header */ -/* Generated by nanopb-0.4.9 */ +/* Generated by nanopb-0.4.9.1 */ #ifndef PB_MESHTASTIC_MESHTASTIC_XMODEM_PB_H_INCLUDED #define PB_MESHTASTIC_MESHTASTIC_XMODEM_PB_H_INCLUDED diff --git a/src/mesh/http/ContentHandler.cpp b/src/mesh/http/ContentHandler.cpp index 8535a335f..aa8a68f91 100644 --- a/src/mesh/http/ContentHandler.cpp +++ b/src/mesh/http/ContentHandler.cpp @@ -74,6 +74,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer) ResourceNode *nodeAPIv1ToRadioOptions = new ResourceNode("/api/v1/toradio", "OPTIONS", &handleAPIv1ToRadio); ResourceNode *nodeAPIv1ToRadio = new ResourceNode("/api/v1/toradio", "PUT", &handleAPIv1ToRadio); + ResourceNode *nodeAPIv1FromRadioOptions = new ResourceNode("/api/v1/fromradio", "OPTIONS", &handleAPIv1FromRadio); ResourceNode *nodeAPIv1FromRadio = new ResourceNode("/api/v1/fromradio", "GET", &handleAPIv1FromRadio); // ResourceNode *nodeHotspotApple = new ResourceNode("/hotspot-detect.html", "GET", &handleHotspot); @@ -92,6 +93,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer) ResourceNode *nodeJsonScanNetworks = new ResourceNode("/json/scanNetworks", "GET", &handleScanNetworks); ResourceNode *nodeJsonBlinkLED = new ResourceNode("/json/blink", "POST", &handleBlinkLED); ResourceNode *nodeJsonReport = new ResourceNode("/json/report", "GET", &handleReport); + ResourceNode *nodeJsonNodes = new ResourceNode("/json/nodes", "GET", &handleNodes); ResourceNode *nodeJsonFsBrowseStatic = new ResourceNode("/json/fs/browse/static", "GET", &handleFsBrowseStatic); ResourceNode *nodeJsonDelete = new ResourceNode("/json/fs/delete/static", "DELETE", &handleFsDeleteStatic); @@ -100,6 +102,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer) // Secure nodes secureServer->registerNode(nodeAPIv1ToRadioOptions); secureServer->registerNode(nodeAPIv1ToRadio); + secureServer->registerNode(nodeAPIv1FromRadioOptions); secureServer->registerNode(nodeAPIv1FromRadio); // secureServer->registerNode(nodeHotspotApple); // secureServer->registerNode(nodeHotspotAndroid); @@ -110,6 +113,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer) secureServer->registerNode(nodeJsonFsBrowseStatic); secureServer->registerNode(nodeJsonDelete); secureServer->registerNode(nodeJsonReport); + secureServer->registerNode(nodeJsonNodes); // secureServer->registerNode(nodeUpdateFs); // secureServer->registerNode(nodeDeleteFs); secureServer->registerNode(nodeAdmin); @@ -121,6 +125,7 @@ void registerHandlers(HTTPServer *insecureServer, HTTPSServer *secureServer) // Insecure nodes insecureServer->registerNode(nodeAPIv1ToRadioOptions); insecureServer->registerNode(nodeAPIv1ToRadio); + insecureServer->registerNode(nodeAPIv1FromRadioOptions); insecureServer->registerNode(nodeAPIv1FromRadio); // insecureServer->registerNode(nodeHotspotApple); // insecureServer->registerNode(nodeHotspotAndroid); @@ -163,6 +168,12 @@ void handleAPIv1FromRadio(HTTPRequest *req, HTTPResponse *res) res->setHeader("Access-Control-Allow-Methods", "GET"); res->setHeader("X-Protobuf-Schema", "https://raw.githubusercontent.com/meshtastic/protobufs/master/meshtastic/mesh.proto"); + if (req->getMethod() == "OPTIONS") { + res->setStatusCode(204); // Success with no content + // res->print(""); @todo remove + return; + } + uint8_t txBuf[MAX_STREAM_BUF_SIZE]; uint32_t len = 1; @@ -441,15 +452,15 @@ void handleStatic(HTTPRequest *req, HTTPResponse *res) return; } else { - LOG_ERROR("This should not have happened..."); - res->println("ERROR: This should not have happened..."); + LOG_ERROR("This should not have happened"); + res->println("ERROR: This should not have happened"); } } void handleFormUpload(HTTPRequest *req, HTTPResponse *res) { - LOG_DEBUG("Form Upload - Disabling keep-alive"); + LOG_DEBUG("Form Upload - Disable keep-alive"); res->setHeader("Connection", "close"); // First, we need to check the encoding of the form that we have received. @@ -508,14 +519,14 @@ void handleFormUpload(HTTPRequest *req, HTTPResponse *res) // Double check that it is what we expect if (name != "file") { - LOG_DEBUG("Skipping unexpected field"); + LOG_DEBUG("Skip unexpected field"); res->println("

No file found.

"); return; } // Double check that it is what we expect if (filename == "") { - LOG_DEBUG("Skipping unexpected field"); + LOG_DEBUG("Skip unexpected field"); res->println("

No file found.

"); return; } @@ -671,6 +682,77 @@ void handleReport(HTTPRequest *req, HTTPResponse *res) delete value; } +void handleNodes(HTTPRequest *req, HTTPResponse *res) +{ + ResourceParameters *params = req->getParams(); + std::string content; + + if (!params->getQueryParameter("content", content)) { + content = "json"; + } + + if (content == "json") { + res->setHeader("Content-Type", "application/json"); + res->setHeader("Access-Control-Allow-Origin", "*"); + res->setHeader("Access-Control-Allow-Methods", "GET"); + } else { + res->setHeader("Content-Type", "text/html"); + res->println("
");
+    }
+
+    JSONArray nodesArray;
+
+    uint32_t readIndex = 0;
+    const meshtastic_NodeInfoLite *tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
+    while (tempNodeInfo != NULL) {
+        if (tempNodeInfo->has_user) {
+            JSONObject node;
+
+            char id[16];
+            snprintf(id, sizeof(id), "!%08x", tempNodeInfo->num);
+
+            node["id"] = new JSONValue(id);
+            node["snr"] = new JSONValue(tempNodeInfo->snr);
+            node["via_mqtt"] = new JSONValue(BoolToString(tempNodeInfo->via_mqtt));
+            node["last_heard"] = new JSONValue((int)tempNodeInfo->last_heard);
+            node["position"] = new JSONValue();
+
+            if (nodeDB->hasValidPosition(tempNodeInfo)) {
+                JSONObject position;
+                position["latitude"] = new JSONValue((float)tempNodeInfo->position.latitude_i * 1e-7);
+                position["longitude"] = new JSONValue((float)tempNodeInfo->position.longitude_i * 1e-7);
+                position["altitude"] = new JSONValue((int)tempNodeInfo->position.altitude);
+                node["position"] = new JSONValue(position);
+            }
+
+            node["long_name"] = new JSONValue(tempNodeInfo->user.long_name);
+            node["short_name"] = new JSONValue(tempNodeInfo->user.short_name);
+            char macStr[18];
+            snprintf(macStr, sizeof(macStr), "%02X:%02X:%02X:%02X:%02X:%02X", tempNodeInfo->user.macaddr[0],
+                     tempNodeInfo->user.macaddr[1], tempNodeInfo->user.macaddr[2], tempNodeInfo->user.macaddr[3],
+                     tempNodeInfo->user.macaddr[4], tempNodeInfo->user.macaddr[5]);
+            node["mac_address"] = new JSONValue(macStr);
+            node["hw_model"] = new JSONValue(tempNodeInfo->user.hw_model);
+
+            nodesArray.push_back(new JSONValue(node));
+        }
+        tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
+    }
+
+    // collect data to inner data object
+    JSONObject jsonObjInner;
+    jsonObjInner["nodes"] = new JSONValue(nodesArray);
+
+    // create json output structure
+    JSONObject jsonObjOuter;
+    jsonObjOuter["data"] = new JSONValue(jsonObjInner);
+    jsonObjOuter["status"] = new JSONValue("ok");
+    // serialize and write it to the stream
+    JSONValue *value = new JSONValue(jsonObjOuter);
+    res->print(value->Stringify().c_str());
+    delete value;
+}
+
 /*
     This supports the Apple Captive Network Assistant (CNA) Portal
 */
@@ -700,9 +782,9 @@ void handleDeleteFsContent(HTTPRequest *req, HTTPResponse *res)
     res->setHeader("Access-Control-Allow-Methods", "GET");
 
     res->println("
Meshtastic
");
-    res->println("Deleting Content in /static/*");
+    res->println("Delete Content in /static/*");
 
-    LOG_INFO("Deleting files from /static/* : ");
+    LOG_INFO("Delete files from /static/* : ");
 
     htmlDeleteDir("/static");
 
diff --git a/src/mesh/http/ContentHandler.h b/src/mesh/http/ContentHandler.h
index 987e3ffef..2066a6d57 100644
--- a/src/mesh/http/ContentHandler.h
+++ b/src/mesh/http/ContentHandler.h
@@ -13,6 +13,7 @@ void handleFsBrowseStatic(HTTPRequest *req, HTTPResponse *res);
 void handleFsDeleteStatic(HTTPRequest *req, HTTPResponse *res);
 void handleBlinkLED(HTTPRequest *req, HTTPResponse *res);
 void handleReport(HTTPRequest *req, HTTPResponse *res);
+void handleNodes(HTTPRequest *req, HTTPResponse *res);
 void handleUpdateFs(HTTPRequest *req, HTTPResponse *res);
 void handleDeleteFsContent(HTTPRequest *req, HTTPResponse *res);
 void handleFs(HTTPRequest *req, HTTPResponse *res);
diff --git a/src/mesh/http/ContentHelper.h b/src/mesh/http/ContentHelper.h
index a80c39f47..e5d3a2f57 100644
--- a/src/mesh/http/ContentHelper.h
+++ b/src/mesh/http/ContentHelper.h
@@ -1,5 +1,6 @@
 #include 
 #include 
+#include 
 
 #define BoolToString(x) ((x) ? "true" : "false")
 
diff --git a/src/mesh/http/WebServer.cpp b/src/mesh/http/WebServer.cpp
index 62a8431fa..d9856e157 100644
--- a/src/mesh/http/WebServer.cpp
+++ b/src/mesh/http/WebServer.cpp
@@ -69,13 +69,13 @@ static void taskCreateCert(void *parameter)
 
 #if 0
     // Delete the saved certs (used in debugging)
-    LOG_DEBUG("Deleting any saved SSL keys ...");
+    LOG_DEBUG("Delete any saved SSL keys");
     // prefs.clear();
     prefs.remove("PK");
     prefs.remove("cert");
 #endif
 
-    LOG_INFO("Checking if we have a previously saved SSL Certificate.");
+    LOG_INFO("Checking if we have a saved SSL Certificate");
 
     size_t pkLen = prefs.getBytesLength("PK");
     size_t certLen = prefs.getBytesLength("cert");
@@ -95,7 +95,7 @@ static void taskCreateCert(void *parameter)
         LOG_DEBUG("Retrieved Certificate: %d Bytes", cert->getCertLength());
     } else {
 
-        LOG_INFO("Creating the certificate. This may take a while. Please wait...");
+        LOG_INFO("Creating the certificate. This may take a while. Please wait");
         yield();
         cert = new SSLCert();
         yield();
@@ -139,7 +139,7 @@ void createSSLCert()
                     16,    /* Priority of the task. */
                     NULL); /* Task handle. */
 
-        LOG_DEBUG("Waiting for SSL Cert to be generated.");
+        LOG_DEBUG("Waiting for SSL Cert to be generated");
         while (!isCertReady) {
             if ((millis() / 500) % 2) {
                 if (runLoop) {
@@ -164,7 +164,7 @@ void createSSLCert()
 
 WebServerThread *webServerThread;
 
-WebServerThread::WebServerThread() : concurrency::OSThread("WebServerThread")
+WebServerThread::WebServerThread() : concurrency::OSThread("WebServer")
 {
     if (!config.network.wifi_enabled) {
         disable();
@@ -189,7 +189,7 @@ int32_t WebServerThread::runOnce()
 
 void initWebServer()
 {
-    LOG_DEBUG("Initializing Web Server ...");
+    LOG_DEBUG("Init Web Server");
 
     // We can now use the new certificate to setup our server as usual.
     secureServer = new HTTPSServer(cert);
@@ -198,10 +198,10 @@ void initWebServer()
     registerHandlers(insecureServer, secureServer);
 
     if (secureServer) {
-        LOG_INFO("Starting Secure Web Server...");
+        LOG_INFO("Start Secure Web Server");
         secureServer->start();
     }
-    LOG_INFO("Starting Insecure Web Server...");
+    LOG_INFO("Start Insecure Web Server");
     insecureServer->start();
     if (insecureServer->isRunning()) {
         LOG_INFO("Web Servers Ready! :-) ");
@@ -210,4 +210,4 @@ void initWebServer()
         LOG_ERROR("Web Servers Failed! ;-( ");
     }
 }
-#endif
\ No newline at end of file
+#endif
diff --git a/src/mesh/mesh-pb-constants.cpp b/src/mesh/mesh-pb-constants.cpp
index a279cd991..deb93d0a6 100644
--- a/src/mesh/mesh-pb-constants.cpp
+++ b/src/mesh/mesh-pb-constants.cpp
@@ -3,7 +3,6 @@
 #include "FSCommon.h"
 #include "mesh-pb-constants.h"
 #include 
-#include 
 #include 
 #include 
 
@@ -14,8 +13,6 @@ size_t pb_encode_to_bytes(uint8_t *destbuf, size_t destbufsize, const pb_msgdesc
     pb_ostream_t stream = pb_ostream_from_buffer(destbuf, destbufsize);
     if (!pb_encode(&stream, fields, src_struct)) {
         LOG_ERROR("Panic: can't encode protobuf reason='%s'", PB_GET_ERROR(&stream));
-        assert(
-            0); // If this assert fails it probably means you made a field too large for the max limits specified in mesh.options
         return 0;
     } else {
         return stream.bytes_written;
@@ -71,4 +68,4 @@ bool is_in_helper(uint32_t n, const uint32_t *array, pb_size_t count)
             return true;
 
     return false;
-}
\ No newline at end of file
+}
diff --git a/src/mesh/mesh-pb-constants.h b/src/mesh/mesh-pb-constants.h
index f91c48560..039b36d8d 100644
--- a/src/mesh/mesh-pb-constants.h
+++ b/src/mesh/mesh-pb-constants.h
@@ -23,6 +23,8 @@
 #define MAX_NUM_NODES 100
 #endif
 
+#define MAX_NUM_NODES_FS 100
+
 /// Max number of channels allowed
 #define MAX_NUM_CHANNELS (member_size(meshtastic_ChannelFile, channels) / member_size(meshtastic_ChannelFile, channels[0]))
 
diff --git a/src/mesh/raspihttp/PiWebServer.cpp b/src/mesh/raspihttp/PiWebServer.cpp
index 711a81024..846d70723 100644
--- a/src/mesh/raspihttp/PiWebServer.cpp
+++ b/src/mesh/raspihttp/PiWebServer.cpp
@@ -232,9 +232,9 @@ int handleAPIv1ToRadio(const struct _u_request *req, struct _u_response *res, vo
     ulfius_add_header_to_response(res, "X-Protobuf-Schema",
                                   "https://raw.githubusercontent.com/meshtastic/protobufs/master/meshtastic/mesh.proto");
 
-    if (req->http_verb == "OPTIONS") {
+    if (strcmp(req->http_verb, "OPTIONS") == 0) {
         ulfius_set_response_properties(res, U_OPT_STATUS, 204);
-        return U_CALLBACK_CONTINUE;
+        return U_CALLBACK_COMPLETE;
     }
 
     byte buffer[MAX_TO_FROM_RADIO_SIZE];
@@ -269,6 +269,11 @@ int handleAPIv1FromRadio(const struct _u_request *req, struct _u_response *res,
     ulfius_add_header_to_response(res, "X-Protobuf-Schema",
                                   "https://raw.githubusercontent.com/meshtastic/protobufs/master/meshtastic/mesh.proto");
 
+    if (strcmp(req->http_verb, "OPTIONS") == 0) {
+        ulfius_set_response_properties(res, U_OPT_STATUS, 204);
+        return U_CALLBACK_COMPLETE;
+    }
+
     uint8_t txBuf[MAX_STREAM_BUF_SIZE];
     uint32_t len = 1;
 
@@ -403,19 +408,19 @@ int PiWebServerThread::CreateSSLCertificate()
     X509 *x509 = NULL;
 
     if (generate_rsa_key(&pkey) != 0) {
-        LOG_ERROR("Error generating RSA-Key.");
+        LOG_ERROR("Error generating RSA-Key");
         return 1;
     }
 
     if (generate_self_signed_x509(pkey, &x509) != 0) {
-        LOG_ERROR("Error generating of X509-Certificat.");
+        LOG_ERROR("Error generating X509-Cert");
         return 2;
     }
 
     // Ope file to write private key file
     FILE *pkey_file = fopen("private_key.pem", "wb");
     if (!pkey_file) {
-        LOG_ERROR("Error opening private key file.");
+        LOG_ERROR("Error opening private key file");
         return 3;
     }
     // write private key file
@@ -425,7 +430,7 @@ int PiWebServerThread::CreateSSLCertificate()
     // open Certificate file
     FILE *x509_file = fopen("certificate.pem", "wb");
     if (!x509_file) {
-        LOG_ERROR("Error opening certificate.");
+        LOG_ERROR("Error opening cert");
         return 4;
     }
     // write cirtificate
@@ -434,7 +439,7 @@ int PiWebServerThread::CreateSSLCertificate()
 
     EVP_PKEY_free(pkey);
     X509_free(x509);
-    LOG_INFO("Create SSL Certifictate -certificate.pem- succesfull ");
+    LOG_INFO("Create SSL Cert -certificate.pem- succesfull ");
     return 0;
 }
 
@@ -453,9 +458,9 @@ PiWebServerThread::PiWebServerThread()
 
     if (settingsMap[webserverport] != 0) {
         webservport = settingsMap[webserverport];
-        LOG_INFO("Using webserver port from yaml config. %i ", webservport);
+        LOG_INFO("Use webserver port from yaml config %i ", webservport);
     } else {
-        LOG_INFO("Webserver port in yaml config set to 0, so defaulting to port 443.");
+        LOG_INFO("Webserver port in yaml config set to 0, defaulting to port 443");
         webservport = 443;
     }
 
@@ -464,7 +469,7 @@ PiWebServerThread::PiWebServerThread()
         LOG_ERROR("Webserver couldn't be started, abort execution");
     } else {
 
-        LOG_INFO("Webserver started ....");
+        LOG_INFO("Webserver started");
         u_map_init(&configWeb.mime_types);
         u_map_put(&configWeb.mime_types, "*", "application/octet-stream");
         u_map_put(&configWeb.mime_types, ".html", "text/html");
@@ -493,7 +498,9 @@ PiWebServerThread::PiWebServerThread()
         // Maximum body size sent by the client is 1 Kb
         instanceWeb.max_post_body_size = 1024;
         ulfius_add_endpoint_by_val(&instanceWeb, "GET", PREFIX, "/api/v1/fromradio/*", 1, &handleAPIv1FromRadio, NULL);
+        ulfius_add_endpoint_by_val(&instanceWeb, "OPTIONS", PREFIX, "/api/v1/fromradio/*", 1, &handleAPIv1FromRadio, NULL);
         ulfius_add_endpoint_by_val(&instanceWeb, "PUT", PREFIX, "/api/v1/toradio/*", 1, &handleAPIv1ToRadio, configWeb.rootPath);
+        ulfius_add_endpoint_by_val(&instanceWeb, "OPTIONS", PREFIX, "/api/v1/toradio/*", 1, &handleAPIv1ToRadio, NULL);
 
         // Add callback function to all endpoints for the Web Server
         ulfius_add_endpoint_by_val(&instanceWeb, "GET", NULL, "/*", 2, &callback_static_file, &configWeb);
@@ -527,4 +534,4 @@ PiWebServerThread::~PiWebServerThread()
 }
 
 #endif
-#endif
\ No newline at end of file
+#endif
diff --git a/src/mesh/wifi/WiFiAPClient.cpp b/src/mesh/wifi/WiFiAPClient.cpp
index e760a8276..38aa2e2a2 100644
--- a/src/mesh/wifi/WiFiAPClient.cpp
+++ b/src/mesh/wifi/WiFiAPClient.cpp
@@ -20,6 +20,8 @@
 #include 
 #include 
 static void WiFiEvent(WiFiEvent_t event);
+#elif defined(ARCH_RP2040)
+#include 
 #endif
 
 #ifndef DISABLE_NTP
@@ -57,30 +59,32 @@ static void onNetworkConnected()
 {
     if (!APStartupComplete) {
         // Start web server
-        LOG_INFO("Starting WiFi network services");
+        LOG_INFO("Start WiFi network services");
 
-#ifdef ARCH_ESP32
         // start mdns
         if (!MDNS.begin("Meshtastic")) {
             LOG_ERROR("Error setting up MDNS responder!");
         } else {
-            LOG_INFO("mDNS responder started");
             LOG_INFO("mDNS Host: Meshtastic.local");
+            MDNS.addService("meshtastic", "tcp", SERVER_API_DEFAULT_PORT);
+#ifdef ARCH_ESP32
             MDNS.addService("http", "tcp", 80);
             MDNS.addService("https", "tcp", 443);
-        }
-#else // ESP32 handles this in WiFiEvent
-        LOG_INFO("Obtained IP address: %s", WiFi.localIP().toString().c_str());
+            // ESP32 prints obtained IP address in WiFiEvent
+#elif defined(ARCH_RP2040)
+            // ARCH_RP2040 does not support HTTPS
+            LOG_INFO("Obtained IP address: %s", WiFi.localIP().toString().c_str());
 #endif
+        }
 
 #ifndef DISABLE_NTP
-        LOG_INFO("Starting NTP time client");
+        LOG_INFO("Start NTP time client");
         timeClient.begin();
         timeClient.setUpdateInterval(60 * 60); // Update once an hour
 #endif
 
         if (config.network.rsyslog_server[0]) {
-            LOG_INFO("Starting Syslog client");
+            LOG_INFO("Start Syslog client");
             // Defaults
             int serverPort = 514;
             const char *serverAddr = config.network.rsyslog_server;
@@ -129,7 +133,7 @@ static int32_t reconnectWiFi()
         // Make sure we clear old connection credentials
 #ifdef ARCH_ESP32
         WiFi.disconnect(false, true);
-#else
+#elif defined(ARCH_RP2040)
         WiFi.disconnect(false);
 #endif
         LOG_INFO("Reconnecting to WiFi access point %s", wifiName);
@@ -144,7 +148,7 @@ static int32_t reconnectWiFi()
 
 #ifndef DISABLE_NTP
     if (WiFi.isConnected() && (!Throttle::isWithinTimespanMs(lastrun_ntp, 43200000) || (lastrun_ntp == 0))) { // every 12 hours
-        LOG_DEBUG("Updating NTP time from %s", config.network.ntp_server);
+        LOG_DEBUG("Update NTP time from %s", config.network.ntp_server);
         if (timeClient.update()) {
             LOG_DEBUG("NTP Request Success - Setting RTCQualityNTP if needed");
 
@@ -193,7 +197,7 @@ void deinitWifi()
     if (isWifiAvailable()) {
 #ifdef ARCH_ESP32
         WiFi.disconnect(true, false);
-#else
+#elif defined(ARCH_RP2040)
         WiFi.disconnect(true);
 #endif
         WiFi.mode(WIFI_OFF);
@@ -229,15 +233,15 @@ bool initWifi()
 
             if (config.network.address_mode == meshtastic_Config_NetworkConfig_AddressMode_STATIC &&
                 config.network.ipv4_config.ip != 0) {
-#ifndef ARCH_RP2040
+#ifdef ARCH_ESP32
                 WiFi.config(config.network.ipv4_config.ip, config.network.ipv4_config.gateway, config.network.ipv4_config.subnet,
                             config.network.ipv4_config.dns);
-#else
+#elif defined(ARCH_RP2040)
                 WiFi.config(config.network.ipv4_config.ip, config.network.ipv4_config.dns, config.network.ipv4_config.gateway,
                             config.network.ipv4_config.subnet);
 #endif
             }
-#ifndef ARCH_RP2040
+#ifdef ARCH_ESP32
             WiFi.onEvent(WiFiEvent);
             WiFi.setAutoReconnect(true);
             WiFi.setSleep(false);
@@ -396,25 +400,25 @@ static void WiFiEvent(WiFiEvent_t event)
         LOG_INFO("SmartConfig: Send ACK done");
         break;
     case ARDUINO_EVENT_PROV_INIT:
-        LOG_INFO("Provisioning: Init");
+        LOG_INFO("Provision Init");
         break;
     case ARDUINO_EVENT_PROV_DEINIT:
-        LOG_INFO("Provisioning: Stopped");
+        LOG_INFO("Provision Stopped");
         break;
     case ARDUINO_EVENT_PROV_START:
-        LOG_INFO("Provisioning: Started");
+        LOG_INFO("Provision Started");
         break;
     case ARDUINO_EVENT_PROV_END:
-        LOG_INFO("Provisioning: End");
+        LOG_INFO("Provision End");
         break;
     case ARDUINO_EVENT_PROV_CRED_RECV:
-        LOG_INFO("Provisioning: Credentials received");
+        LOG_INFO("Provision Credentials received");
         break;
     case ARDUINO_EVENT_PROV_CRED_FAIL:
-        LOG_INFO("Provisioning: Credentials failed");
+        LOG_INFO("Provision Credentials failed");
         break;
     case ARDUINO_EVENT_PROV_CRED_SUCCESS:
-        LOG_INFO("Provisioning: Credentials success");
+        LOG_INFO("Provision Credentials success");
         break;
     default:
         break;
@@ -426,4 +430,4 @@ uint8_t getWifiDisconnectReason()
 {
     return wifiDisconnectReason;
 }
-#endif
\ No newline at end of file
+#endif
diff --git a/src/meshUtils.cpp b/src/meshUtils.cpp
index d211f2922..ea2ba641b 100644
--- a/src/meshUtils.cpp
+++ b/src/meshUtils.cpp
@@ -61,15 +61,13 @@ char *strnstr(const char *s, const char *find, size_t slen)
 void printBytes(const char *label, const uint8_t *p, size_t numbytes)
 {
     int labelSize = strlen(label);
-    if (labelSize < 100 && numbytes < 64) {
-        char *messageBuffer = new char[labelSize + (numbytes * 3) + 2];
-        strncpy(messageBuffer, label, labelSize);
-        for (size_t i = 0; i < numbytes; i++)
-            snprintf(messageBuffer + labelSize + i * 3, 4, " %02x", p[i]);
-        strcpy(messageBuffer + labelSize + numbytes * 3, "\n");
-        LOG_DEBUG(messageBuffer);
-        delete[] messageBuffer;
-    }
+    char *messageBuffer = new char[labelSize + (numbytes * 3) + 2];
+    strncpy(messageBuffer, label, labelSize);
+    for (size_t i = 0; i < numbytes; i++)
+        snprintf(messageBuffer + labelSize + i * 3, 4, " %02x", p[i]);
+    strcpy(messageBuffer + labelSize + numbytes * 3, "\n");
+    LOG_DEBUG(messageBuffer);
+    delete[] messageBuffer;
 }
 
 bool memfll(const uint8_t *mem, uint8_t find, size_t numbytes)
diff --git a/src/modules/AdminModule.cpp b/src/modules/AdminModule.cpp
index c0580ab33..fc3b914e5 100644
--- a/src/modules/AdminModule.cpp
+++ b/src/modules/AdminModule.cpp
@@ -18,7 +18,7 @@
 #ifdef ARCH_PORTDUINO
 #include "unistd.h"
 #endif
-#include "../userPrefs.h"
+
 #include "Default.h"
 #include "TypeConversions.h"
 
@@ -74,15 +74,15 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
     // Could tighten this up further by tracking the last public_key we went an AdminMessage request to
     // and only allowing responses from that remote.
     if (messageIsResponse(r)) {
-        LOG_DEBUG("Allowing admin response message");
+        LOG_DEBUG("Allow admin response message");
     } else if (mp.from == 0) {
         if (config.security.is_managed) {
-            LOG_INFO("Ignoring local admin payload because is_managed.");
+            LOG_INFO("Ignore local admin payload because is_managed");
             return handled;
         }
     } else if (strcasecmp(ch->settings.name, Channels::adminChannel) == 0) {
         if (!config.security.admin_channel_enabled) {
-            LOG_INFO("Ignoring admin channel, as legacy admin is disabled.");
+            LOG_INFO("Ignore admin channel, legacy admin is disabled");
             myReply = allocErrorResponse(meshtastic_Routing_Error_NOT_AUTHORIZED, &mp);
             return handled;
         }
@@ -93,19 +93,19 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
              memcmp(mp.public_key.bytes, config.security.admin_key[1].bytes, 32) == 0) ||
             (config.security.admin_key[2].size == 32 &&
              memcmp(mp.public_key.bytes, config.security.admin_key[2].bytes, 32) == 0)) {
-            LOG_INFO("PKC admin payload with authorized sender key.");
+            LOG_INFO("PKC admin payload with authorized sender key");
         } else {
             myReply = allocErrorResponse(meshtastic_Routing_Error_ADMIN_PUBLIC_KEY_UNAUTHORIZED, &mp);
             LOG_INFO("Received PKC admin payload, but the sender public key does not match the admin authorized key!");
             return handled;
         }
     } else {
-        LOG_INFO("Ignoring unauthorized admin payload %i", r->which_payload_variant);
+        LOG_INFO("Ignore unauthorized admin payload %i", r->which_payload_variant);
         myReply = allocErrorResponse(meshtastic_Routing_Error_NOT_AUTHORIZED, &mp);
         return handled;
     }
 
-    LOG_INFO("Handling admin payload %i", r->which_payload_variant);
+    LOG_INFO("Handle admin payload %i", r->which_payload_variant);
 
     // all of the get and set messages, including those for other modules, flow through here first.
     // any message that changes state, we want to check the passkey for
@@ -122,23 +122,23 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
      * Getters
      */
     case meshtastic_AdminMessage_get_owner_request_tag:
-        LOG_INFO("Client is getting owner");
+        LOG_INFO("Client got owner");
         handleGetOwner(mp);
         break;
 
     case meshtastic_AdminMessage_get_config_request_tag:
-        LOG_INFO("Client is getting config");
+        LOG_INFO("Client got config");
         handleGetConfig(mp, r->get_config_request);
         break;
 
     case meshtastic_AdminMessage_get_module_config_request_tag:
-        LOG_INFO("Client is getting module config");
+        LOG_INFO("Client got module config");
         handleGetModuleConfig(mp, r->get_module_config_request);
         break;
 
     case meshtastic_AdminMessage_get_channel_request_tag: {
         uint32_t i = r->get_channel_request - 1;
-        LOG_INFO("Client is getting channel %u", i);
+        LOG_INFO("Client got channel %u", i);
         if (i >= MAX_NUM_CHANNELS)
             myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
         else
@@ -150,31 +150,37 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
      * Setters
      */
     case meshtastic_AdminMessage_set_owner_tag:
-        LOG_INFO("Client is setting owner");
+        LOG_INFO("Client set owner");
         handleSetOwner(r->set_owner);
         break;
 
     case meshtastic_AdminMessage_set_config_tag:
-        LOG_INFO("Client is setting the config");
+        LOG_INFO("Client set config");
         handleSetConfig(r->set_config);
         break;
 
     case meshtastic_AdminMessage_set_module_config_tag:
-        LOG_INFO("Client is setting the module config");
+        LOG_INFO("Client set module config");
         handleSetModuleConfig(r->set_module_config);
         break;
 
     case meshtastic_AdminMessage_set_channel_tag:
-        LOG_INFO("Client is setting channel %d", r->set_channel.index);
+        LOG_INFO("Client set channel %d", r->set_channel.index);
         if (r->set_channel.index < 0 || r->set_channel.index >= (int)MAX_NUM_CHANNELS)
             myReply = allocErrorResponse(meshtastic_Routing_Error_BAD_REQUEST, &mp);
         else
             handleSetChannel(r->set_channel);
         break;
     case meshtastic_AdminMessage_set_ham_mode_tag:
-        LOG_INFO("Client is setting ham mode");
+        LOG_INFO("Client set ham mode");
         handleSetHamMode(r->set_ham_mode);
         break;
+    case meshtastic_AdminMessage_get_ui_config_request_tag: {
+        LOG_INFO("Client is getting device-ui config");
+        handleGetDeviceUIConfig(mp);
+        handled = true;
+        break;
+    }
 
     /**
      * Other
@@ -192,7 +198,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         } else {
             screen->startFirmwareUpdateScreen();
             BleOta::switchToOtaApp();
-            LOG_INFO("Rebooting to OTA in %d seconds", s);
+            LOG_INFO("Reboot to OTA in %d seconds", s);
         }
 #else
         LOG_INFO("Not on ESP32, scheduling regular reboot in %d seconds", s);
@@ -208,51 +214,57 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         break;
     }
     case meshtastic_AdminMessage_get_device_metadata_request_tag: {
-        LOG_INFO("Client is getting device metadata");
+        LOG_INFO("Client got device metadata");
         handleGetDeviceMetadata(mp);
         break;
     }
     case meshtastic_AdminMessage_factory_reset_config_tag: {
         disableBluetooth();
-        LOG_INFO("Initiating factory config reset");
+        LOG_INFO("Initiate factory config reset");
         nodeDB->factoryReset();
-        LOG_INFO("Factory config reset finished, rebooting soon.");
+        LOG_INFO("Factory config reset finished, rebooting soon");
         reboot(DEFAULT_REBOOT_SECONDS);
         break;
     }
     case meshtastic_AdminMessage_factory_reset_device_tag: {
         disableBluetooth();
-        LOG_INFO("Initiating full factory reset");
+        LOG_INFO("Initiate full factory reset");
         nodeDB->factoryReset(true);
         reboot(DEFAULT_REBOOT_SECONDS);
         break;
     }
     case meshtastic_AdminMessage_nodedb_reset_tag: {
         disableBluetooth();
-        LOG_INFO("Initiating node-db reset");
+        LOG_INFO("Initiate node-db reset");
         nodeDB->resetNodes();
         reboot(DEFAULT_REBOOT_SECONDS);
         break;
     }
+    case meshtastic_AdminMessage_store_ui_config_tag: {
+        LOG_INFO("Storing device-ui config");
+        handleStoreDeviceUIConfig(r->store_ui_config);
+        handled = true;
+        break;
+    }
     case meshtastic_AdminMessage_begin_edit_settings_tag: {
-        LOG_INFO("Beginning transaction for editing settings");
+        LOG_INFO("Begin transaction for editing settings");
         hasOpenEditTransaction = true;
         break;
     }
     case meshtastic_AdminMessage_commit_edit_settings_tag: {
         disableBluetooth();
-        LOG_INFO("Committing transaction for edited settings");
+        LOG_INFO("Commit transaction for edited settings");
         hasOpenEditTransaction = false;
         saveChanges(SEGMENT_CONFIG | SEGMENT_MODULECONFIG | SEGMENT_DEVICESTATE | SEGMENT_CHANNELS);
         break;
     }
     case meshtastic_AdminMessage_get_device_connection_status_request_tag: {
-        LOG_INFO("Client is getting device connection status");
+        LOG_INFO("Client got device connection status");
         handleGetDeviceConnectionStatus(mp);
         break;
     }
     case meshtastic_AdminMessage_get_module_config_response_tag: {
-        LOG_INFO("Client is receiving a get_module_config response.");
+        LOG_INFO("Client received a get_module_config response");
         if (fromOthers && r->get_module_config_response.which_payload_variant ==
                               meshtastic_AdminMessage_ModuleConfigType_REMOTEHARDWARE_CONFIG) {
             handleGetModuleConfigResponse(mp, r);
@@ -260,13 +272,13 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         break;
     }
     case meshtastic_AdminMessage_remove_by_nodenum_tag: {
-        LOG_INFO("Client is receiving a remove_nodenum command.");
+        LOG_INFO("Client received remove_nodenum command");
         nodeDB->removeNodeByNum(r->remove_by_nodenum);
         this->notifyObservers(r); // Observed by screen
         break;
     }
     case meshtastic_AdminMessage_set_favorite_node_tag: {
-        LOG_INFO("Client is receiving a set_favorite_node command.");
+        LOG_INFO("Client received set_favorite_node command");
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->set_favorite_node);
         if (node != NULL) {
             node->is_favorite = true;
@@ -275,7 +287,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         break;
     }
     case meshtastic_AdminMessage_remove_favorite_node_tag: {
-        LOG_INFO("Client is receiving a remove_favorite_node command.");
+        LOG_INFO("Client received remove_favorite_node command");
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->remove_favorite_node);
         if (node != NULL) {
             node->is_favorite = false;
@@ -283,8 +295,30 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         }
         break;
     }
+    case meshtastic_AdminMessage_set_ignored_node_tag: {
+        LOG_INFO("Client received set_ignored_node command");
+        meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->set_ignored_node);
+        if (node != NULL) {
+            node->is_ignored = true;
+            node->has_device_metrics = false;
+            node->has_position = false;
+            node->user.public_key.size = 0;
+            node->user.public_key.bytes[0] = 0;
+            saveChanges(SEGMENT_DEVICESTATE, false);
+        }
+        break;
+    }
+    case meshtastic_AdminMessage_remove_ignored_node_tag: {
+        LOG_INFO("Client received remove_ignored_node command");
+        meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(r->remove_ignored_node);
+        if (node != NULL) {
+            node->is_ignored = false;
+            saveChanges(SEGMENT_DEVICESTATE, false);
+        }
+        break;
+    }
     case meshtastic_AdminMessage_set_fixed_position_tag: {
-        LOG_INFO("Client is receiving a set_fixed_position command.");
+        LOG_INFO("Client received set_fixed_position command");
         meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
         node->has_position = true;
         node->position = TypeConversions::ConvertToPositionLite(r->set_fixed_position);
@@ -300,14 +334,14 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         break;
     }
     case meshtastic_AdminMessage_remove_fixed_position_tag: {
-        LOG_INFO("Client is receiving a remove_fixed_position command.");
+        LOG_INFO("Client received remove_fixed_position command");
         nodeDB->clearLocalPosition();
         config.position.fixed_position = false;
         saveChanges(SEGMENT_DEVICESTATE | SEGMENT_CONFIG, false);
         break;
     }
     case meshtastic_AdminMessage_set_time_only_tag: {
-        LOG_INFO("Client is receiving a set_time_only command.");
+        LOG_INFO("Client received set_time_only command");
         struct timeval tv;
         tv.tv_sec = r->set_time_only;
         tv.tv_usec = 0;
@@ -316,14 +350,14 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
         break;
     }
     case meshtastic_AdminMessage_enter_dfu_mode_request_tag: {
-        LOG_INFO("Client is requesting to enter DFU mode.");
+        LOG_INFO("Client requesting to enter DFU mode");
 #if defined(ARCH_NRF52) || defined(ARCH_RP2040)
         enterDfuMode();
 #endif
         break;
     }
     case meshtastic_AdminMessage_delete_file_request_tag: {
-        LOG_DEBUG("Client is requesting to delete file: %s", r->delete_file_request);
+        LOG_DEBUG("Client requesting to delete file: %s", r->delete_file_request);
 #ifdef FSCom
         if (FSCom.remove(r->delete_file_request)) {
             LOG_DEBUG("Successfully deleted file");
@@ -336,7 +370,7 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
 #ifdef ARCH_PORTDUINO
     case meshtastic_AdminMessage_exit_simulator_tag:
         LOG_INFO("Exiting simulator");
-        _exit(0);
+        exit(0);
         break;
 #endif
 
@@ -348,10 +382,10 @@ bool AdminModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshta
             setPassKey(&res);
             myReply = allocDataProtobuf(res);
         } else if (mp.decoded.want_response) {
-            LOG_DEBUG("We did not responded to a request that wanted a respond. req.variant=%d", r->which_payload_variant);
+            LOG_DEBUG("Did not responded to a request that wanted a respond. req.variant=%d", r->which_payload_variant);
         } else if (handleResult != AdminMessageHandleResult::HANDLED) {
             // Probably a message sent by us or sent to our local node.  FIXME, we should avoid scanning these messages
-            LOG_INFO("Ignoring nonrelevant admin %d", r->which_payload_variant);
+            LOG_INFO("Ignore irrelevant admin %d", r->which_payload_variant);
         }
         break;
     }
@@ -369,7 +403,7 @@ void AdminModule::handleGetModuleConfigResponse(const meshtastic_MeshPacket &mp,
     // Skip if it's disabled or no pins are exposed
     if (!r->get_module_config_response.payload_variant.remote_hardware.enabled ||
         r->get_module_config_response.payload_variant.remote_hardware.available_pins_count == 0) {
-        LOG_DEBUG("Remote hardware module disabled or no available_pins. Skipping...");
+        LOG_DEBUG("Remote hardware module disabled or no available_pins. Skip");
         return;
     }
     for (uint8_t i = 0; i < devicestate.node_remote_hardware_pins_count; i++) {
@@ -427,7 +461,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
 
     switch (c.which_payload_variant) {
     case meshtastic_Config_device_tag:
-        LOG_INFO("Setting config: Device");
+        LOG_INFO("Set config: Device");
         config.has_device = true;
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         if (config.device.double_tap_as_button_press == false && c.payload_variant.device.double_tap_as_button_press == true &&
@@ -455,7 +489,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_ROUTER,
                       meshtastic_Config_DeviceConfig_Role_REPEATER)) {
             config.device.rebroadcast_mode = meshtastic_Config_DeviceConfig_RebroadcastMode_ALL;
-            const char *warning = "Rebroadcast mode can't be set to NONE for a router or repeater\n";
+            const char *warning = "Rebroadcast mode can't be set to NONE for a router or repeater";
             LOG_WARN(warning);
             sendWarning(warning);
         }
@@ -484,14 +518,14 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
 #endif
         break;
     case meshtastic_Config_position_tag:
-        LOG_INFO("Setting config: Position");
+        LOG_INFO("Set config: Position");
         config.has_position = true;
         config.position = c.payload_variant.position;
         // Save nodedb as well in case we got a fixed position packet
         saveChanges(SEGMENT_DEVICESTATE, false);
         break;
     case meshtastic_Config_power_tag:
-        LOG_INFO("Setting config: Power");
+        LOG_INFO("Set config: Power");
         config.has_power = true;
         // Really just the adc override is the only thing that can change without a reboot
         if (config.power.device_battery_ina_address == c.payload_variant.power.device_battery_ina_address &&
@@ -504,14 +538,19 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
         }
         config.power = c.payload_variant.power;
+        if (c.payload_variant.power.on_battery_shutdown_after_secs > 0 &&
+            c.payload_variant.power.on_battery_shutdown_after_secs < 30) {
+            LOG_WARN("Tried to set on_battery_shutdown_after_secs too low, set to min 30 seconds");
+            config.power.on_battery_shutdown_after_secs = 30;
+        }
         break;
     case meshtastic_Config_network_tag:
-        LOG_INFO("Setting config: WiFi");
+        LOG_INFO("Set config: WiFi");
         config.has_network = true;
         config.network = c.payload_variant.network;
         break;
     case meshtastic_Config_display_tag:
-        LOG_INFO("Setting config: Display");
+        LOG_INFO("Set config: Display");
         config.has_display = true;
         if (config.display.screen_on_secs == c.payload_variant.display.screen_on_secs &&
             config.display.flip_screen == c.payload_variant.display.flip_screen &&
@@ -529,7 +568,7 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         config.display = c.payload_variant.display;
         break;
     case meshtastic_Config_lora_tag:
-        LOG_INFO("Setting config: LoRa");
+        LOG_INFO("Set config: LoRa");
         config.has_lora = true;
         // If no lora radio parameters change, don't need to reboot
         if (config.lora.use_preset == c.payload_variant.lora.use_preset && config.lora.region == c.payload_variant.lora.region &&
@@ -568,12 +607,12 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
         }
         break;
     case meshtastic_Config_bluetooth_tag:
-        LOG_INFO("Setting config: Bluetooth");
+        LOG_INFO("Set config: Bluetooth");
         config.has_bluetooth = true;
         config.bluetooth = c.payload_variant.bluetooth;
         break;
     case meshtastic_Config_security_tag:
-        LOG_INFO("Setting config: Security");
+        LOG_INFO("Set config: Security");
         config.security = c.payload_variant.security;
 #if !(MESHTASTIC_EXCLUDE_PKI_KEYGEN) && !(MESHTASTIC_EXCLUDE_PKI)
         // We check for a potentially valid private key, and a blank public key, and regen the public key if needed.
@@ -594,6 +633,9 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             requiresReboot = false;
 
         break;
+    case meshtastic_Config_device_ui_tag:
+        // NOOP! This is handled by handleStoreDeviceUIConfig
+        break;
     }
     if (requiresReboot && !hasOpenEditTransaction) {
         disableBluetooth();
@@ -608,52 +650,52 @@ void AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         disableBluetooth();
     switch (c.which_payload_variant) {
     case meshtastic_ModuleConfig_mqtt_tag:
-        LOG_INFO("Setting module config: MQTT");
+        LOG_INFO("Set module config: MQTT");
         moduleConfig.has_mqtt = true;
         moduleConfig.mqtt = c.payload_variant.mqtt;
         break;
     case meshtastic_ModuleConfig_serial_tag:
-        LOG_INFO("Setting module config: Serial");
+        LOG_INFO("Set module config: Serial");
         moduleConfig.has_serial = true;
         moduleConfig.serial = c.payload_variant.serial;
         break;
     case meshtastic_ModuleConfig_external_notification_tag:
-        LOG_INFO("Setting module config: External Notification");
+        LOG_INFO("Set module config: External Notification");
         moduleConfig.has_external_notification = true;
         moduleConfig.external_notification = c.payload_variant.external_notification;
         break;
     case meshtastic_ModuleConfig_store_forward_tag:
-        LOG_INFO("Setting module config: Store & Forward");
+        LOG_INFO("Set module config: Store & Forward");
         moduleConfig.has_store_forward = true;
         moduleConfig.store_forward = c.payload_variant.store_forward;
         break;
     case meshtastic_ModuleConfig_range_test_tag:
-        LOG_INFO("Setting module config: Range Test");
+        LOG_INFO("Set module config: Range Test");
         moduleConfig.has_range_test = true;
         moduleConfig.range_test = c.payload_variant.range_test;
         break;
     case meshtastic_ModuleConfig_telemetry_tag:
-        LOG_INFO("Setting module config: Telemetry");
+        LOG_INFO("Set module config: Telemetry");
         moduleConfig.has_telemetry = true;
         moduleConfig.telemetry = c.payload_variant.telemetry;
         break;
     case meshtastic_ModuleConfig_canned_message_tag:
-        LOG_INFO("Setting module config: Canned Message");
+        LOG_INFO("Set module config: Canned Message");
         moduleConfig.has_canned_message = true;
         moduleConfig.canned_message = c.payload_variant.canned_message;
         break;
     case meshtastic_ModuleConfig_audio_tag:
-        LOG_INFO("Setting module config: Audio");
+        LOG_INFO("Set module config: Audio");
         moduleConfig.has_audio = true;
         moduleConfig.audio = c.payload_variant.audio;
         break;
     case meshtastic_ModuleConfig_remote_hardware_tag:
-        LOG_INFO("Setting module config: Remote Hardware");
+        LOG_INFO("Set module config: Remote Hardware");
         moduleConfig.has_remote_hardware = true;
         moduleConfig.remote_hardware = c.payload_variant.remote_hardware;
         break;
     case meshtastic_ModuleConfig_neighbor_info_tag:
-        LOG_INFO("Setting module config: Neighbor Info");
+        LOG_INFO("Set module config: Neighbor Info");
         moduleConfig.has_neighbor_info = true;
         if (moduleConfig.neighbor_info.update_interval < min_neighbor_info_broadcast_secs) {
             LOG_DEBUG("Tried to set update_interval too low, setting to %d", default_neighbor_info_broadcast_secs);
@@ -662,17 +704,17 @@ void AdminModule::handleSetModuleConfig(const meshtastic_ModuleConfig &c)
         moduleConfig.neighbor_info = c.payload_variant.neighbor_info;
         break;
     case meshtastic_ModuleConfig_detection_sensor_tag:
-        LOG_INFO("Setting module config: Detection Sensor");
+        LOG_INFO("Set module config: Detection Sensor");
         moduleConfig.has_detection_sensor = true;
         moduleConfig.detection_sensor = c.payload_variant.detection_sensor;
         break;
     case meshtastic_ModuleConfig_ambient_lighting_tag:
-        LOG_INFO("Setting module config: Ambient Lighting");
+        LOG_INFO("Set module config: Ambient Lighting");
         moduleConfig.has_ambient_lighting = true;
         moduleConfig.ambient_lighting = c.payload_variant.ambient_lighting;
         break;
     case meshtastic_ModuleConfig_paxcounter_tag:
-        LOG_INFO("Setting module config: Paxcounter");
+        LOG_INFO("Set module config: Paxcounter");
         moduleConfig.has_paxcounter = true;
         moduleConfig.paxcounter = c.payload_variant.paxcounter;
         break;
@@ -711,51 +753,55 @@ void AdminModule::handleGetConfig(const meshtastic_MeshPacket &req, const uint32
     if (req.decoded.want_response) {
         switch (configType) {
         case meshtastic_AdminMessage_ConfigType_DEVICE_CONFIG:
-            LOG_INFO("Getting config: Device");
+            LOG_INFO("Get config: Device");
             res.get_config_response.which_payload_variant = meshtastic_Config_device_tag;
             res.get_config_response.payload_variant.device = config.device;
             break;
         case meshtastic_AdminMessage_ConfigType_POSITION_CONFIG:
-            LOG_INFO("Getting config: Position");
+            LOG_INFO("Get config: Position");
             res.get_config_response.which_payload_variant = meshtastic_Config_position_tag;
             res.get_config_response.payload_variant.position = config.position;
             break;
         case meshtastic_AdminMessage_ConfigType_POWER_CONFIG:
-            LOG_INFO("Getting config: Power");
+            LOG_INFO("Get config: Power");
             res.get_config_response.which_payload_variant = meshtastic_Config_power_tag;
             res.get_config_response.payload_variant.power = config.power;
             break;
         case meshtastic_AdminMessage_ConfigType_NETWORK_CONFIG:
-            LOG_INFO("Getting config: Network");
+            LOG_INFO("Get config: Network");
             res.get_config_response.which_payload_variant = meshtastic_Config_network_tag;
             res.get_config_response.payload_variant.network = config.network;
             writeSecret(res.get_config_response.payload_variant.network.wifi_psk,
                         sizeof(res.get_config_response.payload_variant.network.wifi_psk), config.network.wifi_psk);
             break;
         case meshtastic_AdminMessage_ConfigType_DISPLAY_CONFIG:
-            LOG_INFO("Getting config: Display");
+            LOG_INFO("Get config: Display");
             res.get_config_response.which_payload_variant = meshtastic_Config_display_tag;
             res.get_config_response.payload_variant.display = config.display;
             break;
         case meshtastic_AdminMessage_ConfigType_LORA_CONFIG:
-            LOG_INFO("Getting config: LoRa");
+            LOG_INFO("Get config: LoRa");
             res.get_config_response.which_payload_variant = meshtastic_Config_lora_tag;
             res.get_config_response.payload_variant.lora = config.lora;
             break;
         case meshtastic_AdminMessage_ConfigType_BLUETOOTH_CONFIG:
-            LOG_INFO("Getting config: Bluetooth");
+            LOG_INFO("Get config: Bluetooth");
             res.get_config_response.which_payload_variant = meshtastic_Config_bluetooth_tag;
             res.get_config_response.payload_variant.bluetooth = config.bluetooth;
             break;
         case meshtastic_AdminMessage_ConfigType_SECURITY_CONFIG:
-            LOG_INFO("Getting config: Security");
+            LOG_INFO("Get config: Security");
             res.get_config_response.which_payload_variant = meshtastic_Config_security_tag;
             res.get_config_response.payload_variant.security = config.security;
             break;
         case meshtastic_AdminMessage_ConfigType_SESSIONKEY_CONFIG:
-            LOG_INFO("Getting config: Sessionkey");
+            LOG_INFO("Get config: Sessionkey");
             res.get_config_response.which_payload_variant = meshtastic_Config_sessionkey_tag;
             break;
+        case meshtastic_AdminMessage_ConfigType_DEVICEUI_CONFIG:
+            // NOOP! This is handled by handleGetDeviceUIConfig
+            res.get_config_response.which_payload_variant = meshtastic_Config_device_ui_tag;
+            break;
         }
         // NOTE: The phone app needs to know the ls_secs value so it can properly expect sleep behavior.
         // So even if we internally use 0 to represent 'use default' we still need to send the value we are
@@ -777,67 +823,67 @@ void AdminModule::handleGetModuleConfig(const meshtastic_MeshPacket &req, const
     if (req.decoded.want_response) {
         switch (configType) {
         case meshtastic_AdminMessage_ModuleConfigType_MQTT_CONFIG:
-            LOG_INFO("Getting module config: MQTT");
+            LOG_INFO("Get module config: MQTT");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_mqtt_tag;
             res.get_module_config_response.payload_variant.mqtt = moduleConfig.mqtt;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_SERIAL_CONFIG:
-            LOG_INFO("Getting module config: Serial");
+            LOG_INFO("Get module config: Serial");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_serial_tag;
             res.get_module_config_response.payload_variant.serial = moduleConfig.serial;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_EXTNOTIF_CONFIG:
-            LOG_INFO("Getting module config: External Notification");
+            LOG_INFO("Get module config: External Notification");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_external_notification_tag;
             res.get_module_config_response.payload_variant.external_notification = moduleConfig.external_notification;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_STOREFORWARD_CONFIG:
-            LOG_INFO("Getting module config: Store & Forward");
+            LOG_INFO("Get module config: Store & Forward");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_store_forward_tag;
             res.get_module_config_response.payload_variant.store_forward = moduleConfig.store_forward;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_RANGETEST_CONFIG:
-            LOG_INFO("Getting module config: Range Test");
+            LOG_INFO("Get module config: Range Test");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_range_test_tag;
             res.get_module_config_response.payload_variant.range_test = moduleConfig.range_test;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_TELEMETRY_CONFIG:
-            LOG_INFO("Getting module config: Telemetry");
+            LOG_INFO("Get module config: Telemetry");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_telemetry_tag;
             res.get_module_config_response.payload_variant.telemetry = moduleConfig.telemetry;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_CANNEDMSG_CONFIG:
-            LOG_INFO("Getting module config: Canned Message");
+            LOG_INFO("Get module config: Canned Message");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_canned_message_tag;
             res.get_module_config_response.payload_variant.canned_message = moduleConfig.canned_message;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_AUDIO_CONFIG:
-            LOG_INFO("Getting module config: Audio");
+            LOG_INFO("Get module config: Audio");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_audio_tag;
             res.get_module_config_response.payload_variant.audio = moduleConfig.audio;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_REMOTEHARDWARE_CONFIG:
-            LOG_INFO("Getting module config: Remote Hardware");
+            LOG_INFO("Get module config: Remote Hardware");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_remote_hardware_tag;
             res.get_module_config_response.payload_variant.remote_hardware = moduleConfig.remote_hardware;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_NEIGHBORINFO_CONFIG:
-            LOG_INFO("Getting module config: Neighbor Info");
+            LOG_INFO("Get module config: Neighbor Info");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_neighbor_info_tag;
             res.get_module_config_response.payload_variant.neighbor_info = moduleConfig.neighbor_info;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_DETECTIONSENSOR_CONFIG:
-            LOG_INFO("Getting module config: Detection Sensor");
+            LOG_INFO("Get module config: Detection Sensor");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_detection_sensor_tag;
             res.get_module_config_response.payload_variant.detection_sensor = moduleConfig.detection_sensor;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_AMBIENTLIGHTING_CONFIG:
-            LOG_INFO("Getting module config: Ambient Lighting");
+            LOG_INFO("Get module config: Ambient Lighting");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_ambient_lighting_tag;
             res.get_module_config_response.payload_variant.ambient_lighting = moduleConfig.ambient_lighting;
             break;
         case meshtastic_AdminMessage_ModuleConfigType_PAXCOUNTER_CONFIG:
-            LOG_INFO("Getting module config: Paxcounter");
+            LOG_INFO("Get module config: Paxcounter");
             res.get_module_config_response.which_payload_variant = meshtastic_ModuleConfig_paxcounter_tag;
             res.get_module_config_response.payload_variant.paxcounter = moduleConfig.paxcounter;
             break;
@@ -900,7 +946,7 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
 #ifdef ARCH_PORTDUINO
     conn.wifi.status.is_connected = true;
 #else
-    conn.wifi.status.is_connected = WiFi.status() != WL_CONNECTED;
+    conn.wifi.status.is_connected = WiFi.status() == WL_CONNECTED;
 #endif
     strncpy(conn.wifi.ssid, config.network.wifi_ssid, 33);
     if (conn.wifi.status.is_connected) {
@@ -932,10 +978,14 @@ void AdminModule::handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &r
     conn.has_bluetooth = true;
     conn.bluetooth.pin = config.bluetooth.fixed_pin;
 #ifdef ARCH_ESP32
-    conn.bluetooth.is_connected = nimbleBluetooth->isConnected();
-    conn.bluetooth.rssi = nimbleBluetooth->getRssi();
+    if (config.bluetooth.enabled && nimbleBluetooth) {
+        conn.bluetooth.is_connected = nimbleBluetooth->isConnected();
+        conn.bluetooth.rssi = nimbleBluetooth->getRssi();
+    }
 #elif defined(ARCH_NRF52)
-    conn.bluetooth.is_connected = nrf52Bluetooth->isConnected();
+    if (config.bluetooth.enabled && nrf52Bluetooth) {
+        conn.bluetooth.is_connected = nrf52Bluetooth->isConnected();
+    }
 #endif
 #endif
     conn.has_serial = true; // No serial-less devices
@@ -964,9 +1014,17 @@ void AdminModule::handleGetChannel(const meshtastic_MeshPacket &req, uint32_t ch
     }
 }
 
+void AdminModule::handleGetDeviceUIConfig(const meshtastic_MeshPacket &req)
+{
+    meshtastic_AdminMessage r = meshtastic_AdminMessage_init_default;
+    r.which_payload_variant = meshtastic_AdminMessage_get_ui_config_response_tag;
+    r.get_ui_config_response = uiconfig;
+    myReply = allocDataProtobuf(r);
+}
+
 void AdminModule::reboot(int32_t seconds)
 {
-    LOG_INFO("Rebooting in %d seconds", seconds);
+    LOG_INFO("Reboot in %d seconds", seconds);
     screen->startAlert("Rebooting...");
     rebootAtMsec = (seconds < 0) ? 0 : (millis() + seconds * 1000);
 }
@@ -974,16 +1032,21 @@ void AdminModule::reboot(int32_t seconds)
 void AdminModule::saveChanges(int saveWhat, bool shouldReboot)
 {
     if (!hasOpenEditTransaction) {
-        LOG_INFO("Saving changes to disk");
+        LOG_INFO("Save changes to disk");
         service->reloadConfig(saveWhat); // Calls saveToDisk among other things
     } else {
-        LOG_INFO("Delaying save of changes to disk until the open transaction is committed");
+        LOG_INFO("Delay save of changes to disk until the open transaction is committed");
     }
     if (shouldReboot && !hasOpenEditTransaction) {
         reboot(DEFAULT_REBOOT_SECONDS);
     }
 }
 
+void AdminModule::handleStoreDeviceUIConfig(const meshtastic_DeviceUIConfig &uicfg)
+{
+    nodeDB->saveProto("/prefs/uiconfig.proto", meshtastic_DeviceUIConfig_size, &meshtastic_DeviceUIConfig_msg, &uicfg);
+}
+
 void AdminModule::handleSetHamMode(const meshtastic_HamParameters &p)
 {
     // Set call sign and override lora limitations for licensed use
@@ -1026,7 +1089,7 @@ void AdminModule::setPassKey(meshtastic_AdminMessage *res)
     }
     memcpy(res->session_passkey.bytes, session_passkey, 8);
     res->session_passkey.size = 8;
-    printBytes("Setting admin key to ", res->session_passkey.bytes, 8);
+    printBytes("Set admin key to ", res->session_passkey.bytes, 8);
     // if halfway to session_expire, regenerate session_passkey, reset the timeout
     // set the key in the packet
 }
@@ -1050,7 +1113,7 @@ bool AdminModule::messageIsResponse(const meshtastic_AdminMessage *r)
         r->which_payload_variant == meshtastic_AdminMessage_get_ringtone_response_tag ||
         r->which_payload_variant == meshtastic_AdminMessage_get_device_connection_status_response_tag ||
         r->which_payload_variant == meshtastic_AdminMessage_get_node_remote_hardware_pins_response_tag ||
-        r->which_payload_variant == meshtastic_NodeRemoteHardwarePinsResponse_node_remote_hardware_pins_tag)
+        r->which_payload_variant == meshtastic_AdminMessage_get_ui_config_response_tag)
         return true;
     else
         return false;
@@ -1066,7 +1129,8 @@ bool AdminModule::messageIsRequest(const meshtastic_AdminMessage *r)
         r->which_payload_variant == meshtastic_AdminMessage_get_device_metadata_request_tag ||
         r->which_payload_variant == meshtastic_AdminMessage_get_ringtone_request_tag ||
         r->which_payload_variant == meshtastic_AdminMessage_get_device_connection_status_request_tag ||
-        r->which_payload_variant == meshtastic_AdminMessage_get_node_remote_hardware_pins_request_tag)
+        r->which_payload_variant == meshtastic_AdminMessage_get_node_remote_hardware_pins_request_tag ||
+        r->which_payload_variant == meshtastic_AdminMessage_get_ui_config_request_tag)
         return true;
     else
         return false;
@@ -1092,4 +1156,4 @@ void disableBluetooth()
         nrf52Bluetooth->shutdown();
 #endif
 #endif
-}
\ No newline at end of file
+}
diff --git a/src/modules/AdminModule.h b/src/modules/AdminModule.h
index e54b89af1..ee2ebfd96 100644
--- a/src/modules/AdminModule.h
+++ b/src/modules/AdminModule.h
@@ -1,3 +1,5 @@
+#include 
+
 #pragma once
 #include "ProtobufModule.h"
 #if HAS_WIFI
@@ -41,6 +43,7 @@ class AdminModule : public ProtobufModule, public Obser
     void handleGetDeviceMetadata(const meshtastic_MeshPacket &req);
     void handleGetDeviceConnectionStatus(const meshtastic_MeshPacket &req);
     void handleGetNodeRemoteHardwarePins(const meshtastic_MeshPacket &req);
+    void handleGetDeviceUIConfig(const meshtastic_MeshPacket &req);
     /**
      * Setters
      */
@@ -50,6 +53,7 @@ class AdminModule : public ProtobufModule, public Obser
     void handleSetModuleConfig(const meshtastic_ModuleConfig &c);
     void handleSetChannel();
     void handleSetHamMode(const meshtastic_HamParameters &req);
+    void handleStoreDeviceUIConfig(const meshtastic_DeviceUIConfig &uicfg);
     void reboot(int32_t seconds);
 
     void setPassKey(meshtastic_AdminMessage *res);
diff --git a/src/modules/AtakPluginModule.cpp b/src/modules/AtakPluginModule.cpp
index 10c887834..d242e5501 100644
--- a/src/modules/AtakPluginModule.cpp
+++ b/src/modules/AtakPluginModule.cpp
@@ -11,7 +11,7 @@
 AtakPluginModule *atakPluginModule;
 
 AtakPluginModule::AtakPluginModule()
-    : ProtobufModule("atak", meshtastic_PortNum_ATAK_PLUGIN, &meshtastic_TAKPacket_msg), concurrency::OSThread("AtakPluginModule")
+    : ProtobufModule("atak", meshtastic_PortNum_ATAK_PLUGIN, &meshtastic_TAKPacket_msg), concurrency::OSThread("AtakPlugin")
 {
     ourPortNum = meshtastic_PortNum_ATAK_PLUGIN;
 }
@@ -73,7 +73,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
             auto length = unishox2_compress_lines(t->contact.callsign, strlen(t->contact.callsign), compressed.contact.callsign,
                                                   sizeof(compressed.contact.callsign) - 1, USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Compression overflowed contact.callsign. Reverting to uncompressed packet");
+                LOG_WARN("Compress overflow contact.callsign. Revert to uncompressed packet");
                 return;
             }
             LOG_DEBUG("Compressed callsign: %d bytes", length);
@@ -81,7 +81,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                              compressed.contact.device_callsign, sizeof(compressed.contact.device_callsign) - 1,
                                              USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Compression overflowed contact.device_callsign. Reverting to uncompressed packet");
+                LOG_WARN("Compress overflow contact.device_callsign. Revert to uncompressed packet");
                 return;
             }
             LOG_DEBUG("Compressed device_callsign: %d bytes", length);
@@ -91,7 +91,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                   compressed.payload_variant.chat.message,
                                                   sizeof(compressed.payload_variant.chat.message) - 1, USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Compression overflowed chat.message. Reverting to uncompressed packet");
+                LOG_WARN("Compress overflow chat.message. Revert to uncompressed packet");
                 return;
             }
             LOG_DEBUG("Compressed chat message: %d bytes", length);
@@ -102,7 +102,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                  compressed.payload_variant.chat.to,
                                                  sizeof(compressed.payload_variant.chat.to) - 1, USX_PSET_DFLT, NULL);
                 if (length < 0) {
-                    LOG_WARN("Compression overflowed chat.to. Reverting to uncompressed packet");
+                    LOG_WARN("Compress overflow chat.to. Revert to uncompressed packet");
                     return;
                 }
                 LOG_DEBUG("Compressed chat to: %d bytes", length);
@@ -114,7 +114,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                  compressed.payload_variant.chat.to_callsign,
                                                  sizeof(compressed.payload_variant.chat.to_callsign) - 1, USX_PSET_DFLT, NULL);
                 if (length < 0) {
-                    LOG_WARN("Compression overflowed chat.to_callsign. Reverting to uncompressed packet");
+                    LOG_WARN("Compress overflow chat.to_callsign. Revert to uncompressed packet");
                     return;
                 }
                 LOG_DEBUG("Compressed chat to_callsign: %d bytes", length);
@@ -126,7 +126,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
     } else {
         if (!t->is_compressed) {
             // Not compressed. Something is wrong
-            LOG_WARN("Received uncompressed TAKPacket over radio! Skipping");
+            LOG_WARN("Received uncompressed TAKPacket over radio! Skip");
             return;
         }
 
@@ -139,7 +139,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                 unishox2_decompress_lines(t->contact.callsign, strlen(t->contact.callsign), uncompressed.contact.callsign,
                                           sizeof(uncompressed.contact.callsign) - 1, USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Decompression overflowed contact.callsign. Bailing out");
+                LOG_WARN("Decompress overflow contact.callsign. Bailing out");
                 return;
             }
             LOG_DEBUG("Decompressed callsign: %d bytes", length);
@@ -148,7 +148,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                uncompressed.contact.device_callsign,
                                                sizeof(uncompressed.contact.device_callsign) - 1, USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Decompression overflowed contact.device_callsign. Bailing out");
+                LOG_WARN("Decompress overflow contact.device_callsign. Bailing out");
                 return;
             }
             LOG_DEBUG("Decompressed device_callsign: %d bytes", length);
@@ -158,7 +158,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                     uncompressed.payload_variant.chat.message,
                                                     sizeof(uncompressed.payload_variant.chat.message) - 1, USX_PSET_DFLT, NULL);
             if (length < 0) {
-                LOG_WARN("Decompression overflowed chat.message. Bailing out");
+                LOG_WARN("Decompress overflow chat.message. Bailing out");
                 return;
             }
             LOG_DEBUG("Decompressed chat message: %d bytes", length);
@@ -169,7 +169,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                                    uncompressed.payload_variant.chat.to,
                                                    sizeof(uncompressed.payload_variant.chat.to) - 1, USX_PSET_DFLT, NULL);
                 if (length < 0) {
-                    LOG_WARN("Decompression overflowed chat.to. Bailing out");
+                    LOG_WARN("Decompress overflow chat.to. Bailing out");
                     return;
                 }
                 LOG_DEBUG("Decompressed chat to: %d bytes", length);
@@ -182,7 +182,7 @@ void AtakPluginModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtast
                                               uncompressed.payload_variant.chat.to_callsign,
                                               sizeof(uncompressed.payload_variant.chat.to_callsign) - 1, USX_PSET_DFLT, NULL);
                 if (length < 0) {
-                    LOG_WARN("Decompression overflowed chat.to_callsign. Bailing out");
+                    LOG_WARN("Decompress overflow chat.to_callsign. Bailing out");
                     return;
                 }
                 LOG_DEBUG("Decompressed chat to_callsign: %d bytes", length);
diff --git a/src/modules/CannedMessageModule.cpp b/src/modules/CannedMessageModule.cpp
index 90c8c0f2c..a96fcc080 100644
--- a/src/modules/CannedMessageModule.cpp
+++ b/src/modules/CannedMessageModule.cpp
@@ -42,7 +42,7 @@ meshtastic_CannedMessageModuleConfig cannedMessageModuleConfig;
 CannedMessageModule *cannedMessageModule;
 
 CannedMessageModule::CannedMessageModule()
-    : SinglePortModule("canned", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("CannedMessageModule")
+    : SinglePortModule("canned", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("CannedMessage")
 {
     if (moduleConfig.canned_message.enabled || CANNED_MESSAGE_MODULE_ENABLE) {
         this->loadProtoForModule();
@@ -55,7 +55,7 @@ CannedMessageModule::CannedMessageModule()
             LOG_INFO("CannedMessageModule is enabled");
 
             // T-Watch interface currently has no way to select destination type, so default to 'node'
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
             this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NODE;
 #endif
 
@@ -81,7 +81,7 @@ int CannedMessageModule::splitConfiguredMessages()
 
     String canned_messages = cannedMessageModuleConfig.messages;
 
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
     String separator = canned_messages.length() ? "|" : "";
 
     canned_messages = "[---- Free Text ----]" + separator + canned_messages;
@@ -150,7 +150,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
     }
     if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_SELECT)) {
 
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
         if (this->currentMessageIndex == 0) {
             this->runState = CANNED_MESSAGE_RUN_STATE_FREETEXT;
 
@@ -177,7 +177,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
         e.action = UIFrameEvent::Action::REGENERATE_FRAMESET; // We want to change the list of frames shown on-screen
         this->currentMessageIndex = -1;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(USE_VIRTUAL_KEYBOARD)
         this->freetext = ""; // clear freetext
         this->cursor = 0;
         this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
@@ -190,7 +190,7 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
         (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) ||
         (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT))) {
 
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
         if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_LEFT)) {
             this->payload = INPUT_BROKER_MSG_LEFT;
         } else if (event->inputEvent == static_cast(meshtastic_ModuleConfig_CannedMessageConfig_InputEventChar_RIGHT)) {
@@ -227,20 +227,20 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
         case INPUT_BROKER_MSG_BRIGHTNESS_UP: // make screen brighter
             if (screen)
                 screen->increaseBrightness();
-            LOG_DEBUG("increasing Screen Brightness");
+            LOG_DEBUG("Increase Screen Brightness");
             break;
         case INPUT_BROKER_MSG_BRIGHTNESS_DOWN: // make screen dimmer
             if (screen)
                 screen->decreaseBrightness();
-            LOG_DEBUG("Decreasing Screen Brightness");
+            LOG_DEBUG("Decrease Screen Brightness");
             break;
-        case INPUT_BROKER_MSG_FN_SYMBOL_ON: // draw modifier (function) symbal
+        case INPUT_BROKER_MSG_FN_SYMBOL_ON: // draw modifier (function) symbol
             if (screen)
-                screen->setFunctionSymbal("Fn");
+                screen->setFunctionSymbol("Fn");
             break;
-        case INPUT_BROKER_MSG_FN_SYMBOL_OFF: // remove modifier (function) symbal
+        case INPUT_BROKER_MSG_FN_SYMBOL_OFF: // remove modifier (function) symbol
             if (screen)
-                screen->removeFunctionSymbal("Fn");
+                screen->removeFunctionSymbol("Fn");
             break;
         // mute (switch off/toggle) external notifications on fn+m
         case INPUT_BROKER_MSG_MUTE_TOGGLE:
@@ -249,13 +249,13 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
                     externalNotificationModule->setMute(false);
                     showTemporaryMessage("Notifications \nEnabled");
                     if (screen)
-                        screen->removeFunctionSymbal("M"); // remove the mute symbol from the bottom right corner
+                        screen->removeFunctionSymbol("M"); // remove the mute symbol from the bottom right corner
                 } else {
                     externalNotificationModule->stopNow(); // this will turn off all GPIO and sounds and idle the loop
                     externalNotificationModule->setMute(true);
                     showTemporaryMessage("Notifications \nDisabled");
                     if (screen)
-                        screen->setFunctionSymbal("M"); // add the mute symbol to the bottom right corner
+                        screen->setFunctionSymbol("M"); // add the mute symbol to the bottom right corner
                 }
             }
             break;
@@ -308,11 +308,11 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
             break;
         }
         if (screen && (event->kbchar != INPUT_BROKER_MSG_FN_SYMBOL_ON)) {
-            screen->removeFunctionSymbal("Fn"); // remove modifier (function) symbal
+            screen->removeFunctionSymbol("Fn"); // remove modifier (function) symbol
         }
     }
 
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
     if (this->runState == CANNED_MESSAGE_RUN_STATE_FREETEXT) {
         String keyTapped = keyForCoordinates(event->touchX, event->touchY);
 
@@ -325,7 +325,9 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
 
             this->shift = !this->shift;
         } else if (keyTapped == "⌫") {
+#ifndef RAK14014
             this->highlight = keyTapped[0];
+#endif
 
             this->payload = 0x08;
 
@@ -341,7 +343,9 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
 
             validEvent = true;
         } else if (keyTapped == " ") {
+#ifndef RAK14014
             this->highlight = keyTapped[0];
+#endif
 
             this->payload = keyTapped[0];
 
@@ -361,7 +365,9 @@ int CannedMessageModule::handleInputEvent(const InputEvent *event)
 
             this->shift = false;
         } else if (keyTapped != "") {
+#ifndef RAK14014
             this->highlight = keyTapped[0];
+#endif
 
             this->payload = this->shift ? keyTapped[0] : std::tolower(keyTapped[0]);
 
@@ -414,7 +420,7 @@ void CannedMessageModule::sendText(NodeNum dest, ChannelIndex channel, const cha
     // or raising a UIFrameEvent before another module has the chance
     this->waitingForAck = true;
 
-    LOG_INFO("Sending message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+    LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
 
     service->sendToMesh(
         p, RX_SRC_LOCAL,
@@ -440,7 +446,7 @@ int32_t CannedMessageModule::runOnce()
         this->freetext = ""; // clear freetext
         this->cursor = 0;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(SENSECAP_INDICATOR)
         this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
 #endif
 
@@ -453,7 +459,7 @@ int32_t CannedMessageModule::runOnce()
         this->freetext = ""; // clear freetext
         this->cursor = 0;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(USE_VIRTUAL_KEYBOARD)
         this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
 #endif
 
@@ -473,7 +479,7 @@ int32_t CannedMessageModule::runOnce()
                     powerFSM.trigger(EVENT_PRESS);
                     return INT32_MAX;
                 } else {
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
                     sendText(this->dest, indexChannels[this->channel], this->messages[this->currentMessageIndex], true);
 #else
                     sendText(NODENUM_BROADCAST, channels.getPrimaryIndex(), this->messages[this->currentMessageIndex], true);
@@ -481,7 +487,7 @@ int32_t CannedMessageModule::runOnce()
                 }
                 this->runState = CANNED_MESSAGE_RUN_STATE_SENDING_ACTIVE;
             } else {
-                // LOG_DEBUG("Reset message is empty.");
+                // LOG_DEBUG("Reset message is empty");
                 this->runState = CANNED_MESSAGE_RUN_STATE_INACTIVE;
             }
         }
@@ -490,7 +496,7 @@ int32_t CannedMessageModule::runOnce()
         this->freetext = ""; // clear freetext
         this->cursor = 0;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(USE_VIRTUAL_KEYBOARD)
         this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
 #endif
 
@@ -507,7 +513,7 @@ int32_t CannedMessageModule::runOnce()
             this->freetext = ""; // clear freetext
             this->cursor = 0;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(USE_VIRTUAL_KEYBOARD)
             this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
 #endif
 
@@ -520,7 +526,7 @@ int32_t CannedMessageModule::runOnce()
             this->freetext = ""; // clear freetext
             this->cursor = 0;
 
-#if !defined(T_WATCH_S3) && !defined(RAK14014)
+#if !defined(T_WATCH_S3) && !defined(RAK14014) && !defined(USE_VIRTUAL_KEYBOARD)
             this->destSelect = CANNED_MESSAGE_DESTINATION_TYPE_NONE;
 #endif
 
@@ -666,7 +672,7 @@ int32_t CannedMessageModule::runOnce()
                 break;
             }
             if (screen)
-                screen->removeFunctionSymbal("Fn");
+                screen->removeFunctionSymbol("Fn");
         }
 
         this->lastTouchMillis = millis();
@@ -763,7 +769,7 @@ void CannedMessageModule::showTemporaryMessage(const String &message)
     setIntervalFromNow(2000);
 }
 
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
 
 String CannedMessageModule::keyForCoordinates(uint x, uint y)
 {
@@ -830,6 +836,11 @@ void CannedMessageModule::drawKeyboard(OLEDDisplay *display, OLEDDisplayUiState
 
             Letter updatedLetter = {letter.character, letter.width, xOffset, yOffset, cellWidth, cellHeight};
 
+#ifdef RAK14014 // Optimize the touch range of the virtual keyboard in the bottom row
+            if (outerIndex == outerSize - 1) {
+                updatedLetter.rectHeight = 240 - yOffset;
+            }
+#endif
             this->keyboard[this->charSet][outerIndex][innerIndex] = updatedLetter;
 
             float characterOffset = ((cellWidth / 2) - (letter.width / 2));
@@ -977,7 +988,7 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
 
     if (temporaryMessage.length() != 0) {
         requestFocus(); // Tell Screen::setFrames to move to our module's frame
-        LOG_DEBUG("Drawing temporary message: %s", temporaryMessage.c_str());
+        LOG_DEBUG("Draw temporary message: %s", temporaryMessage.c_str());
         display->setTextAlignment(TEXT_ALIGN_CENTER);
         display->setFont(FONT_MEDIUM);
         display->drawString(display->getWidth() / 2 + x, 0 + y + 12, temporaryMessage);
@@ -1044,7 +1055,7 @@ void CannedMessageModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *st
         display->drawString(10 + x, 0 + y + FONT_HEIGHT_SMALL, "Canned Message\nModule disabled.");
     } else if (cannedMessageModule->runState == CANNED_MESSAGE_RUN_STATE_FREETEXT) {
         requestFocus(); // Tell Screen::setFrames to move to our module's frame
-#if defined(T_WATCH_S3) || defined(RAK14014)
+#if defined(USE_VIRTUAL_KEYBOARD)
         drawKeyboard(display, state, 0, 0);
 #else
 
@@ -1206,13 +1217,13 @@ AdminMessageHandleResult CannedMessageModule::handleAdminMessageForModule(const
 
     switch (request->which_payload_variant) {
     case meshtastic_AdminMessage_get_canned_message_module_messages_request_tag:
-        LOG_DEBUG("Client is getting radio canned messages");
+        LOG_DEBUG("Client getting radio canned messages");
         this->handleGetCannedMessageModuleMessages(mp, response);
         result = AdminMessageHandleResult::HANDLED_WITH_RESPONSE;
         break;
 
     case meshtastic_AdminMessage_set_canned_message_module_messages_tag:
-        LOG_DEBUG("Client is setting radio canned messages");
+        LOG_DEBUG("Client getting radio canned messages");
         this->handleSetCannedMessageModuleMessages(request->set_canned_message_module_messages);
         result = AdminMessageHandleResult::HANDLED;
         break;
@@ -1256,4 +1267,4 @@ String CannedMessageModule::drawWithCursor(String text, int cursor)
     return result;
 }
 
-#endif
\ No newline at end of file
+#endif
diff --git a/src/modules/CannedMessageModule.h b/src/modules/CannedMessageModule.h
index e9dc2bda0..a91933a0f 100644
--- a/src/modules/CannedMessageModule.h
+++ b/src/modules/CannedMessageModule.h
@@ -68,6 +68,10 @@ class CannedMessageModule : public SinglePortModule, public ObservableshouldDraw(); }
     virtual Observable *getUIFrameObservable() override { return this; }
-    virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) override;
     virtual bool interceptingKeyboardInput() override;
+#if !HAS_TFT
+    virtual void drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) override;
+#endif
     virtual AdminMessageHandleResult handleAdminMessageForModule(const meshtastic_MeshPacket &mp,
                                                                  meshtastic_AdminMessage *request,
                                                                  meshtastic_AdminMessage *response) override;
@@ -152,7 +158,7 @@ class CannedMessageModule : public SinglePortModule, public Observable 0) {
             pinMode(moduleConfig.detection_sensor.monitor_pin, moduleConfig.detection_sensor.use_pullup ? INPUT_PULLUP : INPUT);
         } else {
-            LOG_WARN("Detection Sensor Module: Set to enabled but no monitor pin is set. Disabling module...");
+            LOG_WARN("Detection Sensor Module: Set to enabled but no monitor pin is set. Disable module");
             return disable();
         }
-        LOG_INFO("Detection Sensor Module: Initializing");
+        LOG_INFO("Detection Sensor Module: init");
 
         return DELAYED_INTERVAL;
     }
@@ -118,7 +118,7 @@ int32_t DetectionSensorModule::runOnce()
 
 void DetectionSensorModule::sendDetectionMessage()
 {
-    LOG_DEBUG("Detected event observed. Sending message");
+    LOG_DEBUG("Detected event observed. Send message");
     char *message = new char[40];
     sprintf(message, "%s detected", moduleConfig.detection_sensor.name);
     meshtastic_MeshPacket *p = allocDataPacket();
@@ -130,9 +130,12 @@ void DetectionSensorModule::sendDetectionMessage()
         p->decoded.payload.bytes[p->decoded.payload.size + 1] = '\0'; // Bell character
         p->decoded.payload.size++;
     }
-    LOG_INFO("Sending message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
     lastSentToMesh = millis();
-    service->sendToMesh(p);
+    if (!channels.isDefaultChannel(0)) {
+        LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+        service->sendToMesh(p);
+    } else
+        LOG_ERROR("Message not allow on Public channel");
     delete[] message;
 }
 
@@ -140,14 +143,16 @@ void DetectionSensorModule::sendCurrentStateMessage(bool state)
 {
     char *message = new char[40];
     sprintf(message, "%s state: %i", moduleConfig.detection_sensor.name, state);
-
     meshtastic_MeshPacket *p = allocDataPacket();
     p->want_ack = false;
     p->decoded.payload.size = strlen(message);
     memcpy(p->decoded.payload.bytes, message, p->decoded.payload.size);
-    LOG_INFO("Sending message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
     lastSentToMesh = millis();
-    service->sendToMesh(p);
+    if (!channels.isDefaultChannel(0)) {
+        LOG_INFO("Send message id=%d, dest=%x, msg=%.*s", p->id, p->to, p->decoded.payload.size, p->decoded.payload.bytes);
+        service->sendToMesh(p);
+    } else
+        LOG_ERROR("Message not allow on Public channel");
     delete[] message;
 }
 
@@ -156,4 +161,4 @@ bool DetectionSensorModule::hasDetectionEvent()
     bool currentState = digitalRead(moduleConfig.detection_sensor.monitor_pin);
     // LOG_DEBUG("Detection Sensor Module: Current state: %i", currentState);
     return (moduleConfig.detection_sensor.detection_trigger_type & 1) ? currentState : !currentState;
-}
\ No newline at end of file
+}
diff --git a/src/modules/DetectionSensorModule.h b/src/modules/DetectionSensorModule.h
index b960c8744..3ba10d329 100644
--- a/src/modules/DetectionSensorModule.h
+++ b/src/modules/DetectionSensorModule.h
@@ -4,8 +4,7 @@
 class DetectionSensorModule : public SinglePortModule, private concurrency::OSThread
 {
   public:
-    DetectionSensorModule()
-        : SinglePortModule("detection", meshtastic_PortNum_DETECTION_SENSOR_APP), OSThread("DetectionSensorModule")
+    DetectionSensorModule() : SinglePortModule("detection", meshtastic_PortNum_DETECTION_SENSOR_APP), OSThread("DetectionSensor")
     {
     }
 
diff --git a/src/modules/DropzoneModule.h b/src/modules/DropzoneModule.h
index 28f54ee0f..9e79ab447 100644
--- a/src/modules/DropzoneModule.h
+++ b/src/modules/DropzoneModule.h
@@ -15,7 +15,7 @@ class DropzoneModule : public SinglePortModule, private concurrency::OSThread
     /** Constructor
      * name is for debugging output
      */
-    DropzoneModule() : SinglePortModule("dropzone", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("DropzoneModule")
+    DropzoneModule() : SinglePortModule("dropzone", meshtastic_PortNum_TEXT_MESSAGE_APP), concurrency::OSThread("Dropzone")
     {
         // Set up the analog pin for reading the dropzone status
         pinMode(PIN_A1, INPUT);
diff --git a/src/modules/ExternalNotificationModule.cpp b/src/modules/ExternalNotificationModule.cpp
index a35a74206..bbb3f90e0 100644
--- a/src/modules/ExternalNotificationModule.cpp
+++ b/src/modules/ExternalNotificationModule.cpp
@@ -93,7 +93,7 @@ int32_t ExternalNotificationModule::runOnce()
             nagCycleCutoff = UINT32_MAX;
             LOG_INFO("Turning off external notification: ");
             for (int i = 0; i < 3; i++) {
-                setExternalOff(i);
+                setExternalState(i, false);
                 externalTurnedOn[i] = 0;
                 LOG_INFO("%d ", i);
             }
@@ -114,17 +114,19 @@ int32_t ExternalNotificationModule::runOnce()
             if (externalTurnedOn[0] + (moduleConfig.external_notification.output_ms ? moduleConfig.external_notification.output_ms
                                                                                     : EXT_NOTIFICATION_MODULE_OUTPUT_MS) <
                 millis()) {
-                getExternal(0) ? setExternalOff(0) : setExternalOn(0);
+                setExternalState(0, !getExternal(0));
             }
             if (externalTurnedOn[1] + (moduleConfig.external_notification.output_ms ? moduleConfig.external_notification.output_ms
                                                                                     : EXT_NOTIFICATION_MODULE_OUTPUT_MS) <
                 millis()) {
-                getExternal(1) ? setExternalOff(1) : setExternalOn(1);
+                setExternalState(1, !getExternal(1));
             }
             if (externalTurnedOn[2] + (moduleConfig.external_notification.output_ms ? moduleConfig.external_notification.output_ms
                                                                                     : EXT_NOTIFICATION_MODULE_OUTPUT_MS) <
                 millis()) {
-                getExternal(2) ? setExternalOff(2) : setExternalOn(2);
+                LOG_DEBUG("EXTERNAL 2 %d compared to %d", externalTurnedOn[2] + moduleConfig.external_notification.output_ms,
+                          millis());
+                setExternalState(2, !getExternal(2));
             }
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
             red = (colorState & 4) ? brightnessValues[brightnessIndex] : 0;          // Red enabled on colorState = 4,5,6,7
@@ -184,7 +186,7 @@ int32_t ExternalNotificationModule::runOnce()
         }
 #endif
         // now let the PWM buzzer play
-        if (moduleConfig.external_notification.use_pwm) {
+        if (moduleConfig.external_notification.use_pwm && config.device.buzzer_gpio) {
             if (rtttl::isPlaying()) {
                 rtttl::play();
             } else if (isNagging && (nagCycleCutoff >= millis())) {
@@ -203,86 +205,42 @@ bool ExternalNotificationModule::wantPacket(const meshtastic_MeshPacket *p)
 }
 
 /**
- * Sets the external notification on for the specified index.
+ * Sets the external notification for the specified index.
  *
- * @param index The index of the external notification to turn on.
+ * @param index The index of the external notification to change state.
+ * @param on Whether we are turning things on (true) or off (false).
  */
-void ExternalNotificationModule::setExternalOn(uint8_t index)
+void ExternalNotificationModule::setExternalState(uint8_t index, bool on)
 {
-    externalCurrentState[index] = 1;
+    externalCurrentState[index] = on;
     externalTurnedOn[index] = millis();
 
     switch (index) {
     case 1:
 #ifdef UNPHONE
-        unphone.vibe(true); // the unPhone's vibration motor is on a i2c GPIO expander
+        unphone.vibe(on); // the unPhone's vibration motor is on a i2c GPIO expander
 #endif
         if (moduleConfig.external_notification.output_vibra)
-            digitalWrite(moduleConfig.external_notification.output_vibra, true);
+            digitalWrite(moduleConfig.external_notification.output_vibra, on);
         break;
     case 2:
         if (moduleConfig.external_notification.output_buzzer)
-            digitalWrite(moduleConfig.external_notification.output_buzzer, true);
+            digitalWrite(moduleConfig.external_notification.output_buzzer, on);
         break;
     default:
         if (output > 0)
-            digitalWrite(output, (moduleConfig.external_notification.active ? true : false));
-        break;
-    }
-
-#ifdef HAS_NCP5623
-    if (rgb_found.type == ScanI2C::NCP5623) {
-        rgb.setColor(red, green, blue);
-    }
-#endif
-#ifdef RGBLED_CA
-    analogWrite(RGBLED_RED, 255 - red); // CA type needs reverse logic
-    analogWrite(RGBLED_GREEN, 255 - green);
-    analogWrite(RGBLED_BLUE, 255 - blue);
-#elif defined(RGBLED_RED)
-    analogWrite(RGBLED_RED, red);
-    analogWrite(RGBLED_GREEN, green);
-    analogWrite(RGBLED_BLUE, blue);
-#endif
-#ifdef HAS_NEOPIXEL
-    pixels.fill(pixels.Color(red, green, blue), 0, NEOPIXEL_COUNT);
-    pixels.show();
-#endif
-#ifdef UNPHONE
-    unphone.rgb(red, green, blue);
-#endif
-#ifdef T_WATCH_S3
-    drv.go();
-#endif
-}
-
-void ExternalNotificationModule::setExternalOff(uint8_t index)
-{
-    externalCurrentState[index] = 0;
-    externalTurnedOn[index] = millis();
-
-    switch (index) {
-    case 1:
-#ifdef UNPHONE
-        unphone.vibe(false); // the unPhone's vibration motor is on a i2c GPIO expander
-#endif
-        if (moduleConfig.external_notification.output_vibra)
-            digitalWrite(moduleConfig.external_notification.output_vibra, false);
-        break;
-    case 2:
-        if (moduleConfig.external_notification.output_buzzer)
-            digitalWrite(moduleConfig.external_notification.output_buzzer, false);
-        break;
-    default:
-        if (output > 0)
-            digitalWrite(output, (moduleConfig.external_notification.active ? false : true));
+            digitalWrite(output, (moduleConfig.external_notification.active ? on : !on));
         break;
     }
 
 #if defined(HAS_NCP5623) || defined(RGBLED_RED) || defined(HAS_NEOPIXEL) || defined(UNPHONE)
-    red = 0;
-    green = 0;
-    blue = 0;
+    if (!on) {
+        red = 0;
+        green = 0;
+        blue = 0;
+    }
+#endif
+
 #ifdef HAS_NCP5623
     if (rgb_found.type == ScanI2C::NCP5623) {
         rgb.setColor(red, green, blue);
@@ -304,10 +262,12 @@ void ExternalNotificationModule::setExternalOff(uint8_t index)
 #ifdef UNPHONE
     unphone.rgb(red, green, blue);
 #endif
-#endif
-
 #ifdef T_WATCH_S3
-    drv.stop();
+    if (on) {
+        drv.go();
+    } else {
+        drv.stop();
+    }
 #endif
 }
 
@@ -333,7 +293,7 @@ void ExternalNotificationModule::stopNow()
 
 ExternalNotificationModule::ExternalNotificationModule()
     : SinglePortModule("ExternalNotificationModule", meshtastic_PortNum_TEXT_MESSAGE_APP),
-      concurrency::OSThread("ExternalNotificationModule")
+      concurrency::OSThread("ExternalNotification")
 {
     /*
         Uncomment the preferences below if you want to use the module
@@ -369,34 +329,34 @@ ExternalNotificationModule::ExternalNotificationModule()
                     sizeof(rtttlConfig.ringtone));
         }
 
-        LOG_INFO("Initializing External Notification Module");
+        LOG_INFO("Init External Notification Module");
 
         output = moduleConfig.external_notification.output ? moduleConfig.external_notification.output
                                                            : EXT_NOTIFICATION_MODULE_OUTPUT;
 
         // Set the direction of a pin
         if (output > 0) {
-            LOG_INFO("Using Pin %i in digital mode", output);
+            LOG_INFO("Use Pin %i in digital mode", output);
             pinMode(output, OUTPUT);
         }
-        setExternalOff(0);
+        setExternalState(0, false);
         externalTurnedOn[0] = 0;
         if (moduleConfig.external_notification.output_vibra) {
-            LOG_INFO("Using Pin %i for vibra motor", moduleConfig.external_notification.output_vibra);
+            LOG_INFO("Use Pin %i for vibra motor", moduleConfig.external_notification.output_vibra);
             pinMode(moduleConfig.external_notification.output_vibra, OUTPUT);
-            setExternalOff(1);
+            setExternalState(1, false);
             externalTurnedOn[1] = 0;
         }
         if (moduleConfig.external_notification.output_buzzer) {
             if (!moduleConfig.external_notification.use_pwm) {
-                LOG_INFO("Using Pin %i for buzzer", moduleConfig.external_notification.output_buzzer);
+                LOG_INFO("Use Pin %i for buzzer", moduleConfig.external_notification.output_buzzer);
                 pinMode(moduleConfig.external_notification.output_buzzer, OUTPUT);
-                setExternalOff(2);
+                setExternalState(2, false);
                 externalTurnedOn[2] = 0;
             } else {
                 config.device.buzzer_gpio = config.device.buzzer_gpio ? config.device.buzzer_gpio : PIN_BUZZER;
                 // in PWM Mode we force the buzzer pin if it is set
-                LOG_INFO("Using Pin %i in PWM mode", config.device.buzzer_gpio);
+                LOG_INFO("Use Pin %i in PWM mode", config.device.buzzer_gpio);
             }
         }
 #ifdef HAS_NCP5623
@@ -449,7 +409,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 if (containsBell) {
                     LOG_INFO("externalNotificationModule - Notification Bell");
                     isNagging = true;
-                    setExternalOn(0);
+                    setExternalState(0, true);
                     if (moduleConfig.external_notification.nag_timeout) {
                         nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
                     } else {
@@ -462,7 +422,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 if (containsBell) {
                     LOG_INFO("externalNotificationModule - Notification Bell (Vibra)");
                     isNagging = true;
-                    setExternalOn(1);
+                    setExternalState(1, true);
                     if (moduleConfig.external_notification.nag_timeout) {
                         nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
                     } else {
@@ -476,7 +436,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                     LOG_INFO("externalNotificationModule - Notification Bell (Buzzer)");
                     isNagging = true;
                     if (!moduleConfig.external_notification.use_pwm) {
-                        setExternalOn(2);
+                        setExternalState(2, true);
                     } else {
 #ifdef HAS_I2S
                         audioThread->beginRttl(rtttlConfig.ringtone, strlen_P(rtttlConfig.ringtone));
@@ -495,7 +455,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             if (moduleConfig.external_notification.alert_message) {
                 LOG_INFO("externalNotificationModule - Notification Module");
                 isNagging = true;
-                setExternalOn(0);
+                setExternalState(0, true);
                 if (moduleConfig.external_notification.nag_timeout) {
                     nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
                 } else {
@@ -506,7 +466,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
             if (moduleConfig.external_notification.alert_message_vibra) {
                 LOG_INFO("externalNotificationModule - Notification Module (Vibra)");
                 isNagging = true;
-                setExternalOn(1);
+                setExternalState(1, true);
                 if (moduleConfig.external_notification.nag_timeout) {
                     nagCycleCutoff = millis() + moduleConfig.external_notification.nag_timeout * 1000;
                 } else {
@@ -518,7 +478,7 @@ ProcessMessage ExternalNotificationModule::handleReceived(const meshtastic_MeshP
                 LOG_INFO("externalNotificationModule - Notification Module (Buzzer)");
                 isNagging = true;
                 if (!moduleConfig.external_notification.use_pwm && !moduleConfig.external_notification.use_i2s_as_buzzer) {
-                    setExternalOn(2);
+                    setExternalState(2, true);
                 } else {
 #ifdef HAS_I2S
                     if (moduleConfig.external_notification.use_i2s_as_buzzer) {
@@ -560,13 +520,13 @@ AdminMessageHandleResult ExternalNotificationModule::handleAdminMessageForModule
 
     switch (request->which_payload_variant) {
     case meshtastic_AdminMessage_get_ringtone_request_tag:
-        LOG_INFO("Client is getting ringtone");
+        LOG_INFO("Client getting ringtone");
         this->handleGetRingtone(mp, response);
         result = AdminMessageHandleResult::HANDLED_WITH_RESPONSE;
         break;
 
     case meshtastic_AdminMessage_set_ringtone_message_tag:
-        LOG_INFO("Client is setting ringtone");
+        LOG_INFO("Client setting ringtone");
         this->handleSetRingtone(request->set_canned_message_module_messages);
         result = AdminMessageHandleResult::HANDLED;
         break;
diff --git a/src/modules/ExternalNotificationModule.h b/src/modules/ExternalNotificationModule.h
index a5dff3651..841ca6de9 100644
--- a/src/modules/ExternalNotificationModule.h
+++ b/src/modules/ExternalNotificationModule.h
@@ -32,10 +32,9 @@ class ExternalNotificationModule : public SinglePortModule, private concurrency:
   public:
     ExternalNotificationModule();
 
-    uint32_t nagCycleCutoff = UINT32_MAX;
+    uint32_t nagCycleCutoff = 1;
 
-    void setExternalOn(uint8_t index = 0);
-    void setExternalOff(uint8_t index = 0);
+    void setExternalState(uint8_t index = 0, bool on = false);
     bool getExternal(uint8_t index = 0);
 
     void setMute(bool mute) { isMuted = mute; }
diff --git a/src/modules/Modules.cpp b/src/modules/Modules.cpp
index ad3f0ace4..f386147d0 100644
--- a/src/modules/Modules.cpp
+++ b/src/modules/Modules.cpp
@@ -74,7 +74,7 @@
 #include "modules/StoreForwardModule.h"
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
 #include "modules/ExternalNotificationModule.h"
 #endif
@@ -173,7 +173,7 @@ void setupModules()
         aSerialKeyboardImpl->init();
 #endif // INPUTBROKER_MATRIX_TYPE
 #endif // HAS_BUTTON
-#if ARCH_PORTDUINO
+#if ARCH_PORTDUINO && !HAS_TFT
         aLinuxInputImpl = new LinuxInputImpl();
         aLinuxInputImpl->init();
 #endif
@@ -195,11 +195,13 @@ void setupModules()
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_PMSA003I].first > 0) {
             new AirQualityTelemetryModule();
         }
+#if !MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY
         if (nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MAX30102].first > 0 ||
             nodeTelemetrySensorsMap[meshtastic_TelemetrySensorType_MLX90614].first > 0) {
             new HealthTelemetryModule();
         }
 #endif
+#endif
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_POWER_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
         new PowerTelemetryModule();
 #endif
@@ -223,7 +225,7 @@ void setupModules()
         storeForwardModule = new StoreForwardModule();
 #endif
 #endif
-#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040)
+#if defined(ARCH_ESP32) || defined(ARCH_NRF52) || defined(ARCH_RP2040) || defined(ARCH_PORTDUINO)
 #if !MESHTASTIC_EXCLUDE_EXTERNALNOTIFICATION
         externalNotificationModule = new ExternalNotificationModule();
 #endif
diff --git a/src/modules/NeighborInfoModule.cpp b/src/modules/NeighborInfoModule.cpp
index 85552a6bf..fb658421d 100644
--- a/src/modules/NeighborInfoModule.cpp
+++ b/src/modules/NeighborInfoModule.cpp
@@ -37,7 +37,7 @@ void NeighborInfoModule::printNodeDBNeighbors()
 /* Send our initial owner announcement 35 seconds after we start (to give network time to setup) */
 NeighborInfoModule::NeighborInfoModule()
     : ProtobufModule("neighborinfo", meshtastic_PortNum_NEIGHBORINFO_APP, &meshtastic_NeighborInfo_msg),
-      concurrency::OSThread("NeighborInfoModule")
+      concurrency::OSThread("NeighborInfo")
 {
     ourPortNum = meshtastic_PortNum_NEIGHBORINFO_APP;
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
@@ -91,7 +91,7 @@ void NeighborInfoModule::cleanUpNeighbors()
         // We will remove a neighbor if we haven't heard from them in twice the broadcast interval
         // cannot use isWithinTimespanMs() as it->last_rx_time is seconds since 1970
         if ((now - it->last_rx_time > it->node_broadcast_interval_secs * 2) && (it->node_id != my_node_id)) {
-            LOG_DEBUG("Removing neighbor with node ID 0x%x", it->node_id);
+            LOG_DEBUG("Remove neighbor with node ID 0x%x", it->node_id);
             it = std::vector::reverse_iterator(
                 neighbors.erase(std::next(it).base())); // Erase the element and update the iterator
         } else {
@@ -121,14 +121,17 @@ Will be used for broadcast.
 */
 int32_t NeighborInfoModule::runOnce()
 {
-    if (airTime->isTxAllowedChannelUtil(true) && airTime->isTxAllowedAirUtil()) {
+    if (moduleConfig.neighbor_info.transmit_over_lora && !channels.isDefaultChannel(channels.getPrimaryIndex()) &&
+        airTime->isTxAllowedChannelUtil(true) && airTime->isTxAllowedAirUtil()) {
         sendNeighborInfo(NODENUM_BROADCAST, false);
+    } else {
+        sendNeighborInfo(NODENUM_BROADCAST_NO_LORA, false);
     }
     return Default::getConfiguredOrDefaultMs(moduleConfig.neighbor_info.update_interval, default_neighbor_info_broadcast_secs);
 }
 
 /*
-Collect a recieved neighbor info packet from another node
+Collect a received neighbor info packet from another node
 Pass it to an upper client; do not persist this data on the mesh
 */
 bool NeighborInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_NeighborInfo *np)
@@ -205,7 +208,7 @@ meshtastic_Neighbor *NeighborInfoModule::getOrCreateNeighbor(NodeNum originalSen
         neighbors.push_back(new_nbr);
     } else {
         // If we have too many neighbors, replace the oldest one
-        LOG_WARN("Neighbor DB is full, replacing oldest neighbor");
+        LOG_WARN("Neighbor DB is full, replace oldest neighbor");
         neighbors.erase(neighbors.begin());
         neighbors.push_back(new_nbr);
     }
diff --git a/src/modules/NodeInfoModule.cpp b/src/modules/NodeInfoModule.cpp
index 89f6ed3c4..b55d47d5b 100644
--- a/src/modules/NodeInfoModule.cpp
+++ b/src/modules/NodeInfoModule.cpp
@@ -16,7 +16,7 @@ bool NodeInfoModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mes
 
     bool hasChanged = nodeDB->updateUser(getFrom(&mp), p, mp.channel);
 
-    bool wasBroadcast = mp.to == NODENUM_BROADCAST;
+    bool wasBroadcast = isBroadcast(mp.to);
 
     // Show new nodes on LCD screen
     if (wasBroadcast) {
@@ -50,7 +50,7 @@ void NodeInfoModule::sendOurNodeInfo(NodeNum dest, bool wantReplies, uint8_t cha
         else
             p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
         if (channel > 0) {
-            LOG_DEBUG("sending ourNodeInfo to channel %d", channel);
+            LOG_DEBUG("Send ourNodeInfo to channel %d", channel);
             p->channel = channel;
         }
 
@@ -65,30 +65,36 @@ meshtastic_MeshPacket *NodeInfoModule::allocReply()
 {
     if (!airTime->isTxAllowedChannelUtil(false)) {
         ignoreRequest = true; // Mark it as ignored for MeshModule
-        LOG_DEBUG("Skip sending NodeInfo due to > 40 percent channel util.");
+        LOG_DEBUG("Skip send NodeInfo > 40%% ch. util");
         return NULL;
     }
     // If we sent our NodeInfo less than 5 min. ago, don't send it again as it may be still underway.
     if (!shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 5 * 60 * 1000)) {
-        LOG_DEBUG("Skip sending NodeInfo since we just sent it less than 5 minutes ago.");
+        LOG_DEBUG("Skip send NodeInfo since we sent it <5min ago");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else if (shorterTimeout && lastSentToMesh && Throttle::isWithinTimespanMs(lastSentToMesh, 60 * 1000)) {
-        LOG_DEBUG("Skip sending actively requested NodeInfo since we just sent it less than 60 seconds ago.");
+        LOG_DEBUG("Skip send NodeInfo since we sent it <60s ago");
         ignoreRequest = true; // Mark it as ignored for MeshModule
         return NULL;
     } else {
         ignoreRequest = false; // Don't ignore requests anymore
         meshtastic_User &u = owner;
 
-        LOG_INFO("sending owner %s/%s/%s", u.id, u.long_name, u.short_name);
+        // Strip the public key if the user is licensed
+        if (u.is_licensed && u.public_key.size > 0) {
+            u.public_key.bytes[0] = 0;
+            u.public_key.size = 0;
+        }
+
+        LOG_INFO("Send owner %s/%s/%s", u.id, u.long_name, u.short_name);
         lastSentToMesh = millis();
         return allocDataProtobuf(u);
     }
 }
 
 NodeInfoModule::NodeInfoModule()
-    : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfoModule")
+    : ProtobufModule("nodeinfo", meshtastic_PortNum_NODEINFO_APP, &meshtastic_User_msg), concurrency::OSThread("NodeInfo")
 {
     isPromiscuous = true; // We always want to update our nodedb, even if we are sniffing on others
     setIntervalFromNow(30 *
@@ -102,8 +108,8 @@ int32_t NodeInfoModule::runOnce()
     currentGeneration = radioGeneration;
 
     if (airTime->isTxAllowedAirUtil() && config.device.role != meshtastic_Config_DeviceConfig_Role_CLIENT_HIDDEN) {
-        LOG_INFO("Sending our nodeinfo to mesh (wantReplies=%d)", requestReplies);
+        LOG_INFO("Send our nodeinfo to mesh (wantReplies=%d)", requestReplies);
         sendOurNodeInfo(NODENUM_BROADCAST, requestReplies); // Send our info (don't request replies)
     }
     return Default::getConfiguredOrDefaultMs(config.device.node_info_broadcast_secs, default_node_info_broadcast_secs);
-}
\ No newline at end of file
+}
diff --git a/src/modules/PositionModule.cpp b/src/modules/PositionModule.cpp
index 5500a559e..6285d7aa5 100644
--- a/src/modules/PositionModule.cpp
+++ b/src/modules/PositionModule.cpp
@@ -16,16 +16,12 @@
 #include "meshtastic/atak.pb.h"
 #include "sleep.h"
 #include "target_specific.h"
-
-extern "C" {
 #include 
-}
 
 PositionModule *positionModule;
 
 PositionModule::PositionModule()
-    : ProtobufModule("position", meshtastic_PortNum_POSITION_APP, &meshtastic_Position_msg),
-      concurrency::OSThread("PositionModule")
+    : ProtobufModule("position", meshtastic_PortNum_POSITION_APP, &meshtastic_Position_msg), concurrency::OSThread("Position")
 {
     precision = 0;        // safe starting value
     isPromiscuous = true; // We always want to update our nodedb, even if we are sniffing on others
@@ -39,7 +35,7 @@ PositionModule::PositionModule()
     if ((config.device.role == meshtastic_Config_DeviceConfig_Role_TRACKER ||
          config.device.role == meshtastic_Config_DeviceConfig_Role_TAK_TRACKER) &&
         config.power.is_power_saving) {
-        LOG_DEBUG("Clearing position on startup for sleepy tracker (ー。ー) zzz");
+        LOG_DEBUG("Clear position on startup for sleepy tracker (ー。ー) zzz");
         nodeDB->clearLocalPosition();
     }
 }
@@ -111,7 +107,7 @@ void PositionModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic
 {
     // Phone position packets need to be truncated to the channel precision
     if (isFromUs(&mp) && (precision < 32 && precision > 0)) {
-        LOG_DEBUG("Truncating phone position to channel precision %i", precision);
+        LOG_DEBUG("Truncate phone position to channel precision %i", precision);
         p->latitude_i = p->latitude_i & (UINT32_MAX << (32 - precision));
         p->longitude_i = p->longitude_i & (UINT32_MAX << (32 - precision));
 
@@ -127,11 +123,11 @@ void PositionModule::alterReceivedProtobuf(meshtastic_MeshPacket &mp, meshtastic
 void PositionModule::trySetRtc(meshtastic_Position p, bool isLocal, bool forceUpdate)
 {
     if (hasQualityTimesource() && !isLocal) {
-        LOG_DEBUG("Ignoring time from mesh because we have a GPS, RTC, or Phone/NTP time source in the past day");
+        LOG_DEBUG("Ignore time from mesh because we have a GPS, RTC, or Phone/NTP time source in the past day");
         return;
     }
     if (!isLocal && p.location_source < meshtastic_Position_LocSource_LOC_INTERNAL) {
-        LOG_DEBUG("Ignoring time from mesh because it has a unknown or manual source");
+        LOG_DEBUG("Ignore time from mesh because it has a unknown or manual source");
         return;
     }
     struct timeval tv;
@@ -150,15 +146,24 @@ bool PositionModule::hasQualityTimesource()
 #if MESHTASTIC_EXCLUDE_GPS
     bool hasGpsOrRtc = (rtc_found.address != ScanI2C::ADDRESS_NONE.address);
 #else
-    bool hasGpsOrRtc = (gps && gps->isConnected()) || (rtc_found.address != ScanI2C::ADDRESS_NONE.address);
+    bool hasGpsOrRtc = hasGPS() || (rtc_found.address != ScanI2C::ADDRESS_NONE.address);
 #endif
     return hasGpsOrRtc || setFromPhoneOrNtpToday;
 }
 
+bool PositionModule::hasGPS()
+{
+#if MESHTASTIC_EXCLUDE_GPS
+    return false;
+#else
+    return gps && gps->isConnected();
+#endif
+}
+
 meshtastic_MeshPacket *PositionModule::allocReply()
 {
     if (precision == 0) {
-        LOG_DEBUG("Skipping location send because precision is set to 0!");
+        LOG_DEBUG("Skip location send because precision is set to 0!");
         return nullptr;
     }
 
@@ -178,12 +183,12 @@ meshtastic_MeshPacket *PositionModule::allocReply()
     localPosition.seq_number++;
 
     if (localPosition.latitude_i == 0 && localPosition.longitude_i == 0) {
-        LOG_WARN("Skipping position send because lat/lon are zero!");
+        LOG_WARN("Skip position send because lat/lon are zero!");
         return nullptr;
     }
 
     // lat/lon are unconditionally included - IF AVAILABLE!
-    LOG_DEBUG("Sending location with precision %i", precision);
+    LOG_DEBUG("Send location with precision %i", precision);
     if (precision < 32 && precision > 0) {
         p.latitude_i = localPosition.latitude_i & (UINT32_MAX << (32 - precision));
         p.longitude_i = localPosition.longitude_i & (UINT32_MAX << (32 - precision));
@@ -198,10 +203,21 @@ meshtastic_MeshPacket *PositionModule::allocReply()
     p.precision_bits = precision;
     p.has_latitude_i = true;
     p.has_longitude_i = true;
-    p.time = getValidTime(RTCQualityNTP) > 0 ? getValidTime(RTCQualityNTP) : localPosition.time;
+    // Always use NTP / GPS time if available
+    if (getValidTime(RTCQualityNTP) > 0) {
+        p.time = getValidTime(RTCQualityNTP);
+    } else if (rtc_found.address != ScanI2C::ADDRESS_NONE.address) {
+        LOG_INFO("Use RTC time for position");
+        p.time = getValidTime(RTCQualityDevice);
+    } else if (getRTCQuality() < RTCQualityNTP) {
+        LOG_INFO("Strip low RTCQuality (%d) time from position", getRTCQuality());
+        p.time = 0;
+    }
 
     if (config.position.fixed_position) {
         p.location_source = meshtastic_Position_LocSource_LOC_MANUAL;
+    } else {
+        p.location_source = localPosition.location_source;
     }
 
     if (pos_flags & meshtastic_Config_PositionConfig_PositionFlags_ALTITUDE) {
@@ -246,17 +262,6 @@ meshtastic_MeshPacket *PositionModule::allocReply()
         p.has_ground_speed = true;
     }
 
-    // Strip out any time information before sending packets to other nodes - to keep the wire size small (and because other
-    // nodes shouldn't trust it anyways) Note: we allow a device with a local GPS or NTP to include the time, so that devices
-    // without can get time.
-    if (getRTCQuality() < RTCQualityNTP) {
-        LOG_INFO("Stripping time %u from position send", p.time);
-        p.time = 0;
-    } else {
-        p.time = getValidTime(RTCQualityNTP);
-        LOG_INFO("Providing time to mesh %u", p.time);
-    }
-
     LOG_INFO("Position reply: time=%i lat=%i lon=%i", p.time, p.latitude_i, p.longitude_i);
 
     // TAK Tracker devices should send their position in a TAK packet over the ATAK port
@@ -268,7 +273,7 @@ meshtastic_MeshPacket *PositionModule::allocReply()
 
 meshtastic_MeshPacket *PositionModule::allocAtakPli()
 {
-    LOG_INFO("Sending TAK PLI packet");
+    LOG_INFO("Send TAK PLI packet");
     meshtastic_MeshPacket *mp = allocDataPacket();
     mp->decoded.portnum = meshtastic_PortNum_ATAK_PLUGIN;
 
@@ -308,7 +313,7 @@ void PositionModule::sendOurPosition()
     currentGeneration = radioGeneration;
 
     // If we changed channels, ask everyone else for their latest info
-    LOG_INFO("Sending pos@%x:6 to mesh (wantReplies=%d)", localPosition.timestamp, requestReplies);
+    LOG_INFO("Send pos@%x:6 to mesh (wantReplies=%d)", localPosition.timestamp, requestReplies);
     sendOurPosition(NODENUM_BROADCAST, requestReplies);
 }
 
@@ -351,7 +356,7 @@ void PositionModule::sendOurPosition(NodeNum dest, bool wantReplies, uint8_t cha
     if (IS_ONE_OF(config.device.role, meshtastic_Config_DeviceConfig_Role_TRACKER,
                   meshtastic_Config_DeviceConfig_Role_TAK_TRACKER) &&
         config.power.is_power_saving) {
-        LOG_DEBUG("Starting next execution in 5 seconds and then going to sleep.");
+        LOG_DEBUG("Start next execution in 5s, then sleep");
         sleepOnNextExecution = true;
         setIntervalFromNow(5000);
     }
@@ -364,8 +369,8 @@ int32_t PositionModule::runOnce()
     if (sleepOnNextExecution == true) {
         sleepOnNextExecution = false;
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(config.position.position_broadcast_secs);
-        LOG_DEBUG("Sleeping for %ims, then awaking to send position again.", nightyNightMs);
-        doDeepSleep(nightyNightMs, false);
+        LOG_DEBUG("Sleep for %ims, then awaking to send position again", nightyNightMs);
+        doDeepSleep(nightyNightMs, false, false);
     }
 
     meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
@@ -384,7 +389,7 @@ int32_t PositionModule::runOnce()
     }
 
     if (lastGpsSend == 0 || msSinceLastSend >= intervalMs) {
-        if (hasValidPosition(node)) {
+        if (nodeDB->hasValidPosition(node)) {
             lastGpsSend = now;
 
             lastGpsLatitude = node->position.latitude_i;
@@ -398,7 +403,7 @@ int32_t PositionModule::runOnce()
     } else if (config.position.position_broadcast_smart_enabled) {
         const meshtastic_NodeInfoLite *node2 = service->refreshLocalMeshNode(); // should guarantee there is now a position
 
-        if (hasValidPosition(node2)) {
+        if (nodeDB->hasValidPosition(node2)) {
             // The minimum time (in seconds) that would pass before we are able to send a new position packet.
 
             auto smartPosition = getDistanceTraveledSinceLastSend(node->position);
@@ -407,7 +412,7 @@ int32_t PositionModule::runOnce()
             if (smartPosition.hasTraveledOverThreshold &&
                 Throttle::execute(
                     &lastGpsSend, minimumTimeThreshold, []() { positionModule->sendOurPosition(); },
-                    []() { LOG_DEBUG("Skipping send smart broadcast due to time throttling"); })) {
+                    []() { LOG_DEBUG("Skip send smart broadcast due to time throttling"); })) {
 
                 LOG_DEBUG("Sent smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims, "
                           "minTimeInterval=%ims)",
@@ -449,23 +454,6 @@ struct SmartPosition PositionModule::getDistanceTraveledSinceLastSend(meshtastic
     float distanceTraveledSinceLastSend = GeoCoord::latLongToMeter(
         lastGpsLatitude * 1e-7, lastGpsLongitude * 1e-7, currentPosition.latitude_i * 1e-7, currentPosition.longitude_i * 1e-7);
 
-#ifdef GPS_EXTRAVERBOSE
-    LOG_DEBUG("--------LAST POSITION------------------------------------");
-    LOG_DEBUG("lastGpsLatitude=%i, lastGpsLatitude=%i", lastGpsLatitude, lastGpsLongitude);
-
-    LOG_DEBUG("--------CURRENT POSITION---------------------------------");
-    LOG_DEBUG("currentPosition.latitude_i=%i, currentPosition.longitude_i=%i", lastGpsLatitude, lastGpsLongitude);
-
-    LOG_DEBUG("--------SMART POSITION-----------------------------------");
-    LOG_DEBUG("hasTraveledOverThreshold=%i, distanceTraveled=%f, distanceThreshold=%f",
-              abs(distanceTraveledSinceLastSend) >= distanceTravelThreshold, abs(distanceTraveledSinceLastSend),
-              distanceTravelThreshold);
-
-    if (abs(distanceTraveledSinceLastSend) >= distanceTravelThreshold) {
-        LOG_DEBUG("SMART SEEEEEEEEENDING");
-    }
-#endif
-
     return SmartPosition{.distanceTraveled = abs(distanceTraveledSinceLastSend),
                          .distanceThreshold = distanceTravelThreshold,
                          .hasTraveledOverThreshold = abs(distanceTraveledSinceLastSend) >= distanceTravelThreshold};
@@ -476,13 +464,13 @@ void PositionModule::handleNewPosition()
     meshtastic_NodeInfoLite *node = nodeDB->getMeshNode(nodeDB->getNodeNum());
     const meshtastic_NodeInfoLite *node2 = service->refreshLocalMeshNode(); // should guarantee there is now a position
     // We limit our GPS broadcasts to a max rate
-    if (hasValidPosition(node2)) {
+    if (nodeDB->hasValidPosition(node2)) {
         auto smartPosition = getDistanceTraveledSinceLastSend(node->position);
         uint32_t msSinceLastSend = millis() - lastGpsSend;
         if (smartPosition.hasTraveledOverThreshold &&
             Throttle::execute(
                 &lastGpsSend, minimumTimeThreshold, []() { positionModule->sendOurPosition(); },
-                []() { LOG_DEBUG("Skipping send smart broadcast due to time throttling"); })) {
+                []() { LOG_DEBUG("Skip send smart broadcast due to time throttling"); })) {
             LOG_DEBUG("Sent smart pos@%x:6 to mesh (distanceTraveled=%fm, minDistanceThreshold=%im, timeElapsed=%ims, "
                       "minTimeInterval=%ims)",
                       localPosition.timestamp, smartPosition.distanceTraveled, smartPosition.distanceThreshold, msSinceLastSend,
diff --git a/src/modules/PositionModule.h b/src/modules/PositionModule.h
index 41b86b795..1e4aa5d29 100644
--- a/src/modules/PositionModule.h
+++ b/src/modules/PositionModule.h
@@ -61,6 +61,7 @@ class PositionModule : public ProtobufModule, private concu
     uint32_t precision;
     void sendLostAndFoundText();
     bool hasQualityTimesource();
+    bool hasGPS();
 
     const uint32_t minimumTimeThreshold =
         Default::getConfiguredOrDefaultMs(config.position.broadcast_smart_minimum_interval_secs, 30);
diff --git a/src/modules/PowerStressModule.cpp b/src/modules/PowerStressModule.cpp
index 5605d1100..d487fe6fc 100644
--- a/src/modules/PowerStressModule.cpp
+++ b/src/modules/PowerStressModule.cpp
@@ -15,7 +15,7 @@ extern void printInfo();
 
 PowerStressModule::PowerStressModule()
     : ProtobufModule("powerstress", meshtastic_PortNum_POWERSTRESS_APP, &meshtastic_PowerStressMessage_msg),
-      concurrency::OSThread("PowerStressModule")
+      concurrency::OSThread("PowerStress")
 {
 }
 
@@ -111,7 +111,7 @@ int32_t PowerStressModule::runOnce()
                 setBluetoothEnable(true);
                 break;
             case meshtastic_PowerStressMessage_Opcode_CPU_DEEPSLEEP:
-                doDeepSleep(sleep_msec, true);
+                doDeepSleep(sleep_msec, true, true);
                 break;
             case meshtastic_PowerStressMessage_Opcode_CPU_FULLON: {
                 uint32_t start_msec = millis();
diff --git a/src/modules/RangeTestModule.cpp b/src/modules/RangeTestModule.cpp
index 2deb2ba92..c42839d97 100644
--- a/src/modules/RangeTestModule.cpp
+++ b/src/modules/RangeTestModule.cpp
@@ -24,7 +24,7 @@
 RangeTestModule *rangeTestModule;
 RangeTestModuleRadio *rangeTestModuleRadio;
 
-RangeTestModule::RangeTestModule() : concurrency::OSThread("RangeTestModule") {}
+RangeTestModule::RangeTestModule() : concurrency::OSThread("RangeTest") {}
 
 uint32_t packetSequence = 0;
 
@@ -54,11 +54,11 @@ int32_t RangeTestModule::runOnce()
             firstTime = 0;
 
             if (moduleConfig.range_test.sender) {
-                LOG_INFO("Initializing Range Test Module -- Sender");
+                LOG_INFO("Init Range Test Module -- Sender");
                 started = millis(); // make a note of when we started
                 return (5000);      // Sending first message 5 seconds after initialization.
             } else {
-                LOG_INFO("Initializing Range Test Module -- Receiver");
+                LOG_INFO("Init Range Test Module -- Receiver");
                 return disable();
                 // This thread does not need to run as a receiver
             }
@@ -81,7 +81,7 @@ int32_t RangeTestModule::runOnce()
 
                 // If we have been running for more than 8 hours, turn module back off
                 if (!Throttle::isWithinTimespanMs(started, 28800000)) {
-                    LOG_INFO("Range Test Module - Disabling after 8 hours");
+                    LOG_INFO("Range Test Module - Disable after 8 hours");
                     return disable();
                 } else {
                     return (senderHeartbeat);
@@ -155,8 +155,6 @@ ProcessMessage RangeTestModuleRadio::handleReceived(const meshtastic_MeshPacket
             LOG_DEBUG("mp.from          %d", mp.from);
             LOG_DEBUG("mp.rx_snr        %f", mp.rx_snr);
             LOG_DEBUG("mp.hop_limit     %d", mp.hop_limit);
-            // LOG_DEBUG("mp.decoded.position.latitude_i     %d", mp.decoded.position.latitude_i); // Deprecated
-            // LOG_DEBUG("mp.decoded.position.longitude_i    %d", mp.decoded.position.longitude_i); // Deprecated
             LOG_DEBUG("---- Node Information of Received Packet (mp.from):");
             LOG_DEBUG("n->user.long_name         %s", n->user.long_name);
             LOG_DEBUG("n->user.short_name        %s", n->user.short_name);
@@ -194,8 +192,6 @@ bool RangeTestModuleRadio::appendFile(const meshtastic_MeshPacket &mp)
         LOG_DEBUG("mp.from          %d", mp.from);
         LOG_DEBUG("mp.rx_snr        %f", mp.rx_snr);
         LOG_DEBUG("mp.hop_limit     %d", mp.hop_limit);
-        // LOG_DEBUG("mp.decoded.position.latitude_i     %d", mp.decoded.position.latitude_i);  // Deprecated
-        // LOG_DEBUG("mp.decoded.position.longitude_i    %d", mp.decoded.position.longitude_i); // Deprecated
         LOG_DEBUG("---- Node Information of Received Packet (mp.from):");
         LOG_DEBUG("n->user.long_name         %s", n->user.long_name);
         LOG_DEBUG("n->user.short_name        %s", n->user.short_name);
@@ -215,7 +211,7 @@ bool RangeTestModuleRadio::appendFile(const meshtastic_MeshPacket &mp)
     }
 
     if (FSCom.totalBytes() - FSCom.usedBytes() < 51200) {
-        LOG_DEBUG("Filesystem doesn't have enough free space. Aborting write.");
+        LOG_DEBUG("Filesystem doesn't have enough free space. Aborting write");
         return 0;
     }
 
@@ -265,13 +261,21 @@ bool RangeTestModuleRadio::appendFile(const meshtastic_MeshPacket &mp)
         fileToAppend.printf("??:??:??,"); // Time
     }
 
-    fileToAppend.printf("%d,", getFrom(&mp));                     // From
-    fileToAppend.printf("%s,", n->user.long_name);                // Long Name
-    fileToAppend.printf("%f,", n->position.latitude_i * 1e-7);    // Sender Lat
-    fileToAppend.printf("%f,", n->position.longitude_i * 1e-7);   // Sender Long
-    fileToAppend.printf("%f,", gpsStatus->getLatitude() * 1e-7);  // RX Lat
-    fileToAppend.printf("%f,", gpsStatus->getLongitude() * 1e-7); // RX Long
-    fileToAppend.printf("%d,", gpsStatus->getAltitude());         // RX Altitude
+    fileToAppend.printf("%d,", getFrom(&mp));                   // From
+    fileToAppend.printf("%s,", n->user.long_name);              // Long Name
+    fileToAppend.printf("%f,", n->position.latitude_i * 1e-7);  // Sender Lat
+    fileToAppend.printf("%f,", n->position.longitude_i * 1e-7); // Sender Long
+    if (gpsStatus->getIsConnected() || config.position.fixed_position) {
+        fileToAppend.printf("%f,", gpsStatus->getLatitude() * 1e-7);  // RX Lat
+        fileToAppend.printf("%f,", gpsStatus->getLongitude() * 1e-7); // RX Long
+        fileToAppend.printf("%d,", gpsStatus->getAltitude());         // RX Altitude
+    } else {
+        // When the phone API is in use, the node info will be updated with position
+        meshtastic_NodeInfoLite *us = nodeDB->getMeshNode(nodeDB->getNodeNum());
+        fileToAppend.printf("%f,", us->position.latitude_i * 1e-7);  // RX Lat
+        fileToAppend.printf("%f,", us->position.longitude_i * 1e-7); // RX Long
+        fileToAppend.printf("%d,", us->position.altitude);           // RX Altitude
+    }
 
     fileToAppend.printf("%f,", mp.rx_snr); // RX SNR
 
diff --git a/src/modules/RemoteHardwareModule.cpp b/src/modules/RemoteHardwareModule.cpp
index a7d81cd2d..9bc8512b6 100644
--- a/src/modules/RemoteHardwareModule.cpp
+++ b/src/modules/RemoteHardwareModule.cpp
@@ -64,7 +64,7 @@ static uint64_t digitalReads(uint64_t mask, uint64_t maskAvailable)
 
 RemoteHardwareModule::RemoteHardwareModule()
     : ProtobufModule("remotehardware", meshtastic_PortNum_REMOTE_HARDWARE_APP, &meshtastic_HardwareMessage_msg),
-      concurrency::OSThread("RemoteHardwareModule")
+      concurrency::OSThread("RemoteHardware")
 {
     // restrict to the gpio channel for rx
     boundChannel = Channels::gpioChannel;
@@ -149,7 +149,7 @@ int32_t RemoteHardwareModule::runOnce()
 
             if (curVal != previousWatch) {
                 previousWatch = curVal;
-                LOG_INFO("Broadcasting GPIOS 0x%llx changed!", curVal);
+                LOG_INFO("Broadcast GPIOS 0x%llx changed!", curVal);
 
                 // Something changed!  Tell the world with a broadcast message
                 meshtastic_HardwareMessage r = meshtastic_HardwareMessage_init_default;
diff --git a/src/modules/ReplyModule.cpp b/src/modules/ReplyModule.cpp
index 27a12d26b..c4f63c6b1 100644
--- a/src/modules/ReplyModule.cpp
+++ b/src/modules/ReplyModule.cpp
@@ -15,7 +15,7 @@ meshtastic_MeshPacket *ReplyModule::allocReply()
     LOG_INFO("Received message from=0x%0x, id=%d, msg=%.*s", req.from, req.id, p.payload.size, p.payload.bytes);
 #endif
 
-    screen->print("Sending reply\n");
+    screen->print("Send reply\n");
 
     const char *replyStr = "Message Received";
     auto reply = allocDataPacket();                 // Allocate a packet for sending
diff --git a/src/modules/RoutingModule.cpp b/src/modules/RoutingModule.cpp
index 3b7be1ab7..a501e319b 100644
--- a/src/modules/RoutingModule.cpp
+++ b/src/modules/RoutingModule.cpp
@@ -10,11 +10,7 @@ RoutingModule *routingModule;
 
 bool RoutingModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Routing *r)
 {
-    printPacket("Routing sniffing", &mp);
-    router->sniffReceived(&mp, r);
-
-    bool maybePKI =
-        mp.which_payload_variant == meshtastic_MeshPacket_encrypted_tag && mp.channel == 0 && mp.to != NODENUM_BROADCAST;
+    bool maybePKI = mp.which_payload_variant == meshtastic_MeshPacket_encrypted_tag && mp.channel == 0 && !isBroadcast(mp.to);
     // Beginning of logic whether to drop the packet based on Rebroadcast mode
     if (mp.which_payload_variant == meshtastic_MeshPacket_encrypted_tag &&
         (config.device.rebroadcast_mode == meshtastic_Config_DeviceConfig_RebroadcastMode_LOCAL_ONLY ||
@@ -26,9 +22,12 @@ bool RoutingModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, mesh
             return false;
     }
 
+    printPacket("Routing sniffing", &mp);
+    router->sniffReceived(&mp, r);
+
     // FIXME - move this to a non promsicious PhoneAPI module?
     // Note: we are careful not to send back packets that started with the phone back to the phone
-    if ((mp.to == NODENUM_BROADCAST || isToUs(&mp)) && (mp.from != 0)) {
+    if ((isBroadcast(mp.to) || isToUs(&mp)) && (mp.from != 0)) {
         printPacket("Delivering rx packet", &mp);
         service->handleFromRadio(&mp);
     }
@@ -50,10 +49,9 @@ meshtastic_MeshPacket *RoutingModule::allocReply()
     return NULL;
 }
 
-void RoutingModule::sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopStart,
-                               uint8_t hopLimit)
+void RoutingModule::sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit)
 {
-    auto p = allocAckNak(err, to, idFrom, chIndex, hopStart, hopLimit);
+    auto p = allocAckNak(err, to, idFrom, chIndex, hopLimit);
 
     router->sendLocal(p); // we sometimes send directly to the local node
 }
@@ -79,7 +77,7 @@ RoutingModule::RoutingModule() : ProtobufModule("routing", meshtastic_PortNum_RO
 {
     isPromiscuous = true;
 
-    // moved the ReboradcastMode logic into handleReceivedProtobuf
+    // moved the RebroadcastMode logic into handleReceivedProtobuf
     // LocalOnly requires either the from or to to be a known node
     // knownOnly specifically requires the from to be a known node.
     encryptedOk = true;
diff --git a/src/modules/RoutingModule.h b/src/modules/RoutingModule.h
index f085b307b..7c34c5bc9 100644
--- a/src/modules/RoutingModule.h
+++ b/src/modules/RoutingModule.h
@@ -13,8 +13,7 @@ class RoutingModule : public ProtobufModule
      */
     RoutingModule();
 
-    void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopStart = 0,
-                    uint8_t hopLimit = 0);
+    void sendAckNak(meshtastic_Routing_Error err, NodeNum to, PacketId idFrom, ChannelIndex chIndex, uint8_t hopLimit = 0);
 
     // Given the hopStart and hopLimit upon reception of a request, return the hop limit to use for the response
     uint8_t getHopLimitForResponse(uint8_t hopStart, uint8_t hopLimit);
@@ -36,4 +35,4 @@ class RoutingModule : public ProtobufModule
     virtual bool wantPacket(const meshtastic_MeshPacket *p) override { return true; }
 };
 
-extern RoutingModule *routingModule;
+extern RoutingModule *routingModule;
\ No newline at end of file
diff --git a/src/modules/SerialModule.cpp b/src/modules/SerialModule.cpp
index dc9c8aa85..bf53b1748 100644
--- a/src/modules/SerialModule.cpp
+++ b/src/modules/SerialModule.cpp
@@ -61,13 +61,13 @@ SerialModule *serialModule;
 SerialModuleRadio *serialModuleRadio;
 
 #if defined(TTGO_T_ECHO) || defined(CANARYONE)
-SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("SerialModule") {}
+SerialModule::SerialModule() : StreamAPI(&Serial), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial;
 #elif defined(CONFIG_IDF_TARGET_ESP32C6)
-SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("SerialModule") {}
+SerialModule::SerialModule() : StreamAPI(&Serial1), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial1;
 #else
-SerialModule::SerialModule() : StreamAPI(&Serial2), concurrency::OSThread("SerialModule") {}
+SerialModule::SerialModule() : StreamAPI(&Serial2), concurrency::OSThread("Serial") {}
 static Print *serialPrint = &Serial2;
 #endif
 
@@ -125,7 +125,7 @@ int32_t SerialModule::runOnce()
     if (moduleConfig.serial.override_console_serial_port || (moduleConfig.serial.rxd && moduleConfig.serial.txd)) {
         if (firstTime) {
             // Interface with the serial peripheral from in here.
-            LOG_INFO("Initializing serial peripheral interface");
+            LOG_INFO("Init serial peripheral interface");
 
             uint32_t baud = getBaudRate();
 
@@ -204,9 +204,11 @@ int32_t SerialModule::runOnce()
                     lastNmeaTime = millis();
                     uint32_t readIndex = 0;
                     const meshtastic_NodeInfoLite *tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
-                    while (tempNodeInfo != NULL && tempNodeInfo->has_user && hasValidPosition(tempNodeInfo)) {
-                        printWPL(outbuf, sizeof(outbuf), tempNodeInfo->position, tempNodeInfo->user.long_name, true);
-                        serialPrint->printf("%s", outbuf);
+                    while (tempNodeInfo != NULL) {
+                        if (tempNodeInfo->has_user && nodeDB->hasValidPosition(tempNodeInfo)) {
+                            printWPL(outbuf, sizeof(outbuf), tempNodeInfo->position, tempNodeInfo->user.long_name, true);
+                            serialPrint->printf("%s", outbuf);
+                        }
                         tempNodeInfo = nodeDB->readNextMeshNode(readIndex);
                     }
                 }
@@ -315,7 +317,7 @@ ProcessMessage SerialModuleRadio::handleReceived(const meshtastic_MeshPacket &mp
         // LOG_DEBUG("Received text msg self=0x%0x, from=0x%0x, to=0x%0x, id=%d, msg=%.*s",
         //          nodeDB->getNodeNum(), mp.from, mp.to, mp.id, p.payload.size, p.payload.bytes);
 
-        if (!isFromUs(&mp)) {
+        if (isFromUs(&mp)) {
 
             /*
              * If moduleConfig.serial.echo is true, then echo the packets that are sent out
@@ -472,7 +474,7 @@ void SerialModule::processWXSerial()
                         if (windDirPos != NULL) {
                             // Extract data after "=" for WindDir
                             strcpy(windDir, windDirPos + 15); // Add 15 to skip "WindDir = "
-                            double radians = toRadians(strtof(windDir, nullptr));
+                            double radians = GeoCoord::toRadians(strtof(windDir, nullptr));
                             dir_sum_sin += sin(radians);
                             dir_sum_cos += cos(radians);
                             dirCount++;
@@ -532,14 +534,14 @@ void SerialModule::processWXSerial()
                  batVoltageF, capVoltageF, temperatureF);
     }
     if (gotwind && !Throttle::isWithinTimespanMs(lastAveraged, averageIntervalMillis)) {
-        // calulate averages and send to the mesh
+        // calculate averages and send to the mesh
         float velAvg = 1.0 * velSum / velCount;
 
         double avgSin = dir_sum_sin / dirCount;
         double avgCos = dir_sum_cos / dirCount;
 
         double avgRadians = atan2(avgSin, avgCos);
-        float dirAvg = toDegrees(avgRadians);
+        float dirAvg = GeoCoord::toDegrees(avgRadians);
 
         if (dirAvg < 0) {
             dirAvg += 360.0;
diff --git a/src/modules/StoreForwardModule.cpp b/src/modules/StoreForwardModule.cpp
index 039523207..0a6e1b4c4 100644
--- a/src/modules/StoreForwardModule.cpp
+++ b/src/modules/StoreForwardModule.cpp
@@ -46,7 +46,7 @@ int32_t StoreForwardModule::runOnce()
         } else if (this->heartbeat && (!Throttle::isWithinTimespanMs(lastHeartbeat, heartbeatInterval * 1000)) &&
                    airTime->isTxAllowedChannelUtil(true)) {
             lastHeartbeat = millis();
-            LOG_INFO("Sending heartbeat");
+            LOG_INFO("Send heartbeat");
             meshtastic_StoreAndForward sf = meshtastic_StoreAndForward_init_zero;
             sf.rr = meshtastic_StoreAndForward_RequestResponse_ROUTER_HEARTBEAT;
             sf.which_variant = meshtastic_StoreAndForward_heartbeat_tag;
@@ -73,11 +73,11 @@ void StoreForwardModule::populatePSRAM()
     LOG_DEBUG("Before PSRAM init: heap %d/%d PSRAM %d/%d", memGet.getFreeHeap(), memGet.getHeapSize(), memGet.getFreePsram(),
               memGet.getPsramSize());
 
-    /* Use a maximum of 2/3 the available PSRAM unless otherwise specified.
+    /* Use a maximum of 3/4 the available PSRAM unless otherwise specified.
         Note: This needs to be done after every thing that would use PSRAM
     */
     uint32_t numberOfPackets =
-        (this->records ? this->records : (((memGet.getFreePsram() / 3) * 2) / sizeof(PacketHistoryStruct)));
+        (this->records ? this->records : (((memGet.getFreePsram() / 4) * 3) / sizeof(PacketHistoryStruct)));
     this->records = numberOfPackets;
 #if defined(ARCH_ESP32)
     this->packetHistory = static_cast(ps_calloc(numberOfPackets, sizeof(PacketHistoryStruct)));
@@ -105,7 +105,7 @@ void StoreForwardModule::historySend(uint32_t secAgo, uint32_t to)
         queueSize = this->historyReturnMax;
 
     if (queueSize) {
-        LOG_INFO("S&F - Sending %u message(s)", queueSize);
+        LOG_INFO("S&F - Send %u message(s)", queueSize);
         this->busy = true; // runOnce() will pickup the next steps once busy = true.
         this->busyTo = to;
     } else {
@@ -187,7 +187,7 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     const auto &p = mp.decoded;
 
     if (this->packetHistoryTotalCount == this->records) {
-        LOG_WARN("S&F - PSRAM Full. Starting overwrite.");
+        LOG_WARN("S&F - PSRAM Full. Starting overwrite");
         this->packetHistoryTotalCount = 0;
         for (auto &i : lastRequest) {
             i.second = 0; // Clear the last request index for each client device
@@ -198,6 +198,9 @@ void StoreForwardModule::historyAdd(const meshtastic_MeshPacket &mp)
     this->packetHistory[this->packetHistoryTotalCount].to = mp.to;
     this->packetHistory[this->packetHistoryTotalCount].channel = mp.channel;
     this->packetHistory[this->packetHistoryTotalCount].from = getFrom(&mp);
+    this->packetHistory[this->packetHistoryTotalCount].id = mp.id;
+    this->packetHistory[this->packetHistoryTotalCount].reply_id = p.reply_id;
+    this->packetHistory[this->packetHistoryTotalCount].emoji = (bool)p.emoji;
     this->packetHistory[this->packetHistoryTotalCount].payload_size = p.payload.size;
     memcpy(this->packetHistory[this->packetHistoryTotalCount].payload, p.payload.bytes, meshtastic_Constants_DATA_PAYLOAD_LEN);
 
@@ -215,7 +218,7 @@ bool StoreForwardModule::sendPayload(NodeNum dest, uint32_t last_time)
 {
     meshtastic_MeshPacket *p = preparePayload(dest, last_time);
     if (p) {
-        LOG_INFO("Sending S&F Payload");
+        LOG_INFO("Send S&F Payload");
         service->sendToMesh(p);
         this->requestCount++;
         return true;
@@ -244,8 +247,11 @@ meshtastic_MeshPacket *StoreForwardModule::preparePayload(NodeNum dest, uint32_t
 
                 p->to = local ? this->packetHistory[i].to : dest; // PhoneAPI can handle original `to`
                 p->from = this->packetHistory[i].from;
+                p->id = this->packetHistory[i].id;
                 p->channel = this->packetHistory[i].channel;
+                p->decoded.reply_id = this->packetHistory[i].reply_id;
                 p->rx_time = this->packetHistory[i].time;
+                p->decoded.emoji = (uint32_t)this->packetHistory[i].emoji;
 
                 // Let's assume that if the server received the S&F request that the client is in range.
                 //   TODO: Make this configurable.
@@ -365,7 +371,7 @@ void StoreForwardModule::statsSend(uint32_t to)
     sf.variant.stats.return_max = this->historyReturnMax;
     sf.variant.stats.return_window = this->historyReturnWindow;
 
-    LOG_DEBUG("Sending S&F Stats");
+    LOG_DEBUG("Send S&F Stats");
     storeForwardModule->sendMessage(to, sf);
 }
 
@@ -393,7 +399,7 @@ ProcessMessage StoreForwardModule::handleReceived(const meshtastic_MeshPacket &m
                 }
             } else {
                 storeForwardModule->historyAdd(mp);
-                LOG_INFO("S&F stored. Message history contains %u records now.", this->packetHistoryTotalCount);
+                LOG_INFO("S&F stored. Message history contains %u records now", this->packetHistoryTotalCount);
             }
         } else if (!isFromUs(&mp) && mp.decoded.portnum == meshtastic_PortNum_STORE_FORWARD_APP) {
             auto &p = mp.decoded;
@@ -403,7 +409,7 @@ ProcessMessage StoreForwardModule::handleReceived(const meshtastic_MeshPacket &m
                 if (pb_decode_from_bytes(p.payload.bytes, p.payload.size, &meshtastic_StoreAndForward_msg, &scratch)) {
                     decoded = &scratch;
                 } else {
-                    LOG_ERROR("Error decoding protobuf module!");
+                    LOG_ERROR("Error decoding proto module!");
                     // if we can't decode it, nobody can process it!
                     return ProcessMessage::STOP;
                 }
@@ -482,7 +488,7 @@ bool StoreForwardModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp,
             LOG_INFO("Client Request to send STATS");
             if (this->busy) {
                 storeForwardModule->sendMessage(getFrom(&mp), meshtastic_StoreAndForward_RequestResponse_ROUTER_BUSY);
-                LOG_INFO("S&F - Busy. Try again shortly.");
+                LOG_INFO("S&F - Busy. Try again shortly");
             } else {
                 storeForwardModule->statsSend(getFrom(&mp));
             }
@@ -552,7 +558,7 @@ bool StoreForwardModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp,
 }
 
 StoreForwardModule::StoreForwardModule()
-    : concurrency::OSThread("StoreForwardModule"),
+    : concurrency::OSThread("StoreForward"),
       ProtobufModule("StoreForward", meshtastic_PortNum_STORE_FORWARD_APP, &meshtastic_StoreAndForward_msg)
 {
 
@@ -573,7 +579,7 @@ StoreForwardModule::StoreForwardModule()
 
         // Router
         if ((config.device.role == meshtastic_Config_DeviceConfig_Role_ROUTER || moduleConfig.store_forward.is_server)) {
-            LOG_INFO("Initializing Store & Forward Module in Server mode");
+            LOG_INFO("Init Store & Forward Module in Server mode");
             if (memGet.getPsramSize() > 0) {
                 if (memGet.getFreePsram() >= 1024 * 1024) {
 
@@ -602,16 +608,16 @@ StoreForwardModule::StoreForwardModule()
                     is_server = true;
                 } else {
                     LOG_INFO(".");
-                    LOG_INFO("S&F: not enough PSRAM free, disabling.");
+                    LOG_INFO("S&F: not enough PSRAM free, Disable");
                 }
             } else {
-                LOG_INFO("S&F: device doesn't have PSRAM, disabling.");
+                LOG_INFO("S&F: device doesn't have PSRAM, Disable");
             }
 
             // Client
         } else {
             is_client = true;
-            LOG_INFO("Initializing Store & Forward Module in Client mode");
+            LOG_INFO("Init Store & Forward Module in Client mode");
         }
     } else {
         disable();
diff --git a/src/modules/StoreForwardModule.h b/src/modules/StoreForwardModule.h
index e3273470b..30db1625c 100644
--- a/src/modules/StoreForwardModule.h
+++ b/src/modules/StoreForwardModule.h
@@ -13,7 +13,10 @@ struct PacketHistoryStruct {
     uint32_t time;
     uint32_t to;
     uint32_t from;
+    uint32_t id;
     uint8_t channel;
+    uint32_t reply_id;
+    bool emoji;
     uint8_t payload[meshtastic_Constants_DATA_PAYLOAD_LEN];
     pb_size_t payload_size;
 };
diff --git a/src/modules/Telemetry/AirQualityTelemetry.cpp b/src/modules/Telemetry/AirQualityTelemetry.cpp
index 594707537..6a8077f03 100644
--- a/src/modules/Telemetry/AirQualityTelemetry.cpp
+++ b/src/modules/Telemetry/AirQualityTelemetry.cpp
@@ -33,9 +33,10 @@ int32_t AirQualityTelemetryModule::runOnce()
         firstTime = false;
 
         if (moduleConfig.telemetry.air_quality_enabled) {
-            LOG_INFO("Air quality Telemetry: Initializing");
+            LOG_INFO("Air quality Telemetry: init");
             if (!aqi.begin_I2C()) {
-                LOG_WARN("Could not establish i2c connection to AQI sensor. Rescanning...");
+#ifndef I2C_NO_RESCAN
+                LOG_WARN("Could not establish i2c connection to AQI sensor. Rescan");
                 // rescan for late arriving sensors. AQI Module starts about 10 seconds into the boot so this is plenty.
                 uint8_t i2caddr_scan[] = {PMSA0031_ADDR};
                 uint8_t i2caddr_asize = 1;
@@ -51,6 +52,7 @@ int32_t AirQualityTelemetryModule::runOnce()
                         i2cScanner->fetchI2CBus(found.address);
                     return 1000;
                 }
+#endif
                 return disable();
             }
             return 1000;
@@ -105,23 +107,28 @@ bool AirQualityTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPack
 bool AirQualityTelemetryModule::getAirQualityTelemetry(meshtastic_Telemetry *m)
 {
     if (!aqi.read(&data)) {
-        LOG_WARN("Skipping send measurements. Could not read AQIn");
+        LOG_WARN("Skip send measurements. Could not read AQIn");
         return false;
     }
 
     m->time = getTime();
     m->which_variant = meshtastic_Telemetry_air_quality_metrics_tag;
+    m->variant.air_quality_metrics.has_pm10_standard = true;
     m->variant.air_quality_metrics.pm10_standard = data.pm10_standard;
+    m->variant.air_quality_metrics.has_pm25_standard = true;
     m->variant.air_quality_metrics.pm25_standard = data.pm25_standard;
+    m->variant.air_quality_metrics.has_pm100_standard = true;
     m->variant.air_quality_metrics.pm100_standard = data.pm100_standard;
 
+    m->variant.air_quality_metrics.has_pm10_environmental = true;
     m->variant.air_quality_metrics.pm10_environmental = data.pm10_env;
+    m->variant.air_quality_metrics.has_pm25_environmental = true;
     m->variant.air_quality_metrics.pm25_environmental = data.pm25_env;
+    m->variant.air_quality_metrics.has_pm100_environmental = true;
     m->variant.air_quality_metrics.pm100_environmental = data.pm100_env;
 
-    LOG_INFO("(Sending): PM1.0(Standard)=%i, PM2.5(Standard)=%i, PM10.0(Standard)=%i",
-             m->variant.air_quality_metrics.pm10_standard, m->variant.air_quality_metrics.pm25_standard,
-             m->variant.air_quality_metrics.pm100_standard);
+    LOG_INFO("Send: PM1.0(Standard)=%i, PM2.5(Standard)=%i, PM10.0(Standard)=%i", m->variant.air_quality_metrics.pm10_standard,
+             m->variant.air_quality_metrics.pm25_standard, m->variant.air_quality_metrics.pm100_standard);
 
     LOG_INFO("         | PM1.0(Environmental)=%i, PM2.5(Environmental)=%i, PM10.0(Environmental)=%i",
              m->variant.air_quality_metrics.pm10_environmental, m->variant.air_quality_metrics.pm25_environmental,
@@ -148,7 +155,7 @@ meshtastic_MeshPacket *AirQualityTelemetryModule::allocReply()
         if (decoded->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
             meshtastic_Telemetry m = meshtastic_Telemetry_init_zero;
             if (getAirQualityTelemetry(&m)) {
-                LOG_INFO("Air quality telemetry replying to request");
+                LOG_INFO("Air quality telemetry reply to request");
                 return allocDataProtobuf(m);
             } else {
                 return NULL;
@@ -176,10 +183,10 @@ bool AirQualityTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         lastMeasurementPacket = packetPool.allocCopy(*p);
         if (phoneOnly) {
-            LOG_INFO("Sending packet to phone");
+            LOG_INFO("Send packet to phone");
             service->sendToPhone(p);
         } else {
-            LOG_INFO("Sending packet to mesh");
+            LOG_INFO("Send packet to mesh");
             service->sendToMesh(p, RX_SRC_LOCAL, true);
         }
         return true;
diff --git a/src/modules/Telemetry/AirQualityTelemetry.h b/src/modules/Telemetry/AirQualityTelemetry.h
index fb8edd07e..3b983bd56 100644
--- a/src/modules/Telemetry/AirQualityTelemetry.h
+++ b/src/modules/Telemetry/AirQualityTelemetry.h
@@ -16,7 +16,7 @@ class AirQualityTelemetryModule : private concurrency::OSThread, public Protobuf
 
   public:
     AirQualityTelemetryModule()
-        : concurrency::OSThread("AirQualityTelemetryModule"),
+        : concurrency::OSThread("AirQualityTelemetry"),
           ProtobufModule("AirQualityTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         lastMeasurementPacket = nullptr;
diff --git a/src/modules/Telemetry/DeviceTelemetry.cpp b/src/modules/Telemetry/DeviceTelemetry.cpp
index 45093340e..192754e09 100644
--- a/src/modules/Telemetry/DeviceTelemetry.cpp
+++ b/src/modules/Telemetry/DeviceTelemetry.cpp
@@ -76,10 +76,11 @@ meshtastic_MeshPacket *DeviceTelemetryModule::allocReply()
         }
         // Check for a request for device metrics
         if (decoded->which_variant == meshtastic_Telemetry_device_metrics_tag) {
-            LOG_INFO("Device telemetry replying to request");
-
-            meshtastic_Telemetry telemetry = getDeviceTelemetry();
-            return allocDataProtobuf(telemetry);
+            LOG_INFO("Device telemetry reply to request");
+            return allocDataProtobuf(getDeviceTelemetry());
+        } else if (decoded->which_variant == meshtastic_Telemetry_local_stats_tag) {
+            LOG_INFO("Device telemetry reply w/ LocalStats to request");
+            return allocDataProtobuf(getLocalStatsTelemetry());
         }
     }
     return NULL;
@@ -112,7 +113,7 @@ meshtastic_Telemetry DeviceTelemetryModule::getDeviceTelemetry()
     return t;
 }
 
-void DeviceTelemetryModule::sendLocalStatsToPhone()
+meshtastic_Telemetry DeviceTelemetryModule::getLocalStatsTelemetry()
 {
     meshtastic_Telemetry telemetry = meshtastic_Telemetry_init_zero;
     telemetry.which_variant = meshtastic_Telemetry_local_stats_tag;
@@ -129,12 +130,20 @@ void DeviceTelemetryModule::sendLocalStatsToPhone()
         telemetry.variant.local_stats.num_packets_rx_bad = RadioLibInterface::instance->rxBad;
         telemetry.variant.local_stats.num_tx_relay = RadioLibInterface::instance->txRelay;
     }
+#ifdef ARCH_PORTDUINO
+    if (SimRadio::instance) {
+        telemetry.variant.local_stats.num_packets_tx = SimRadio::instance->txGood;
+        telemetry.variant.local_stats.num_packets_rx = SimRadio::instance->rxGood + SimRadio::instance->rxBad;
+        telemetry.variant.local_stats.num_packets_rx_bad = SimRadio::instance->rxBad;
+        telemetry.variant.local_stats.num_tx_relay = SimRadio::instance->txRelay;
+    }
+#endif
     if (router) {
         telemetry.variant.local_stats.num_rx_dupe = router->rxDupe;
         telemetry.variant.local_stats.num_tx_relay_canceled = router->txRelayCanceled;
     }
 
-    LOG_INFO("(Sending local stats): uptime=%i, channel_utilization=%f, air_util_tx=%f, num_online_nodes=%i, num_total_nodes=%i",
+    LOG_INFO("Sending local stats: uptime=%i, channel_utilization=%f, air_util_tx=%f, num_online_nodes=%i, num_total_nodes=%i",
              telemetry.variant.local_stats.uptime_seconds, telemetry.variant.local_stats.channel_utilization,
              telemetry.variant.local_stats.air_util_tx, telemetry.variant.local_stats.num_online_nodes,
              telemetry.variant.local_stats.num_total_nodes);
@@ -142,7 +151,12 @@ void DeviceTelemetryModule::sendLocalStatsToPhone()
     LOG_INFO("num_packets_tx=%i, num_packets_rx=%i, num_packets_rx_bad=%i", telemetry.variant.local_stats.num_packets_tx,
              telemetry.variant.local_stats.num_packets_rx, telemetry.variant.local_stats.num_packets_rx_bad);
 
-    meshtastic_MeshPacket *p = allocDataProtobuf(telemetry);
+    return telemetry;
+}
+
+void DeviceTelemetryModule::sendLocalStatsToPhone()
+{
+    meshtastic_MeshPacket *p = allocDataProtobuf(getLocalStatsTelemetry());
     p->to = NODENUM_BROADCAST;
     p->decoded.want_response = false;
     p->priority = meshtastic_MeshPacket_Priority_BACKGROUND;
@@ -153,7 +167,7 @@ void DeviceTelemetryModule::sendLocalStatsToPhone()
 bool DeviceTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 {
     meshtastic_Telemetry telemetry = getDeviceTelemetry();
-    LOG_INFO("(Sending): air_util_tx=%f, channel_utilization=%f, battery_level=%i, voltage=%f, uptime=%i",
+    LOG_INFO("Send: air_util_tx=%f, channel_utilization=%f, battery_level=%i, voltage=%f, uptime=%i",
              telemetry.variant.device_metrics.air_util_tx, telemetry.variant.device_metrics.channel_utilization,
              telemetry.variant.device_metrics.battery_level, telemetry.variant.device_metrics.voltage,
              telemetry.variant.device_metrics.uptime_seconds);
@@ -165,10 +179,10 @@ bool DeviceTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
     nodeDB->updateTelemetry(nodeDB->getNodeNum(), telemetry, RX_SRC_LOCAL);
     if (phoneOnly) {
-        LOG_INFO("Sending packet to phone");
+        LOG_INFO("Send packet to phone");
         service->sendToPhone(p);
     } else {
-        LOG_INFO("Sending packet to mesh");
+        LOG_INFO("Send packet to mesh");
         service->sendToMesh(p, RX_SRC_LOCAL, true);
     }
     return true;
diff --git a/src/modules/Telemetry/DeviceTelemetry.h b/src/modules/Telemetry/DeviceTelemetry.h
index 6d7f69891..19b7d5b01 100644
--- a/src/modules/Telemetry/DeviceTelemetry.h
+++ b/src/modules/Telemetry/DeviceTelemetry.h
@@ -12,7 +12,7 @@ class DeviceTelemetryModule : private concurrency::OSThread, public ProtobufModu
 
   public:
     DeviceTelemetryModule()
-        : concurrency::OSThread("DeviceTelemetryModule"),
+        : concurrency::OSThread("DeviceTelemetry"),
           ProtobufModule("DeviceTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         uptimeWrapCount = 0;
@@ -42,6 +42,8 @@ class DeviceTelemetryModule : private concurrency::OSThread, public ProtobufModu
 
   private:
     meshtastic_Telemetry getDeviceTelemetry();
+    meshtastic_Telemetry getLocalStatsTelemetry();
+
     void sendLocalStatsToPhone();
     uint32_t sendToPhoneIntervalMs = SECONDS_IN_MINUTE * 1000;           // Send to phone every minute
     uint32_t sendStatsToPhoneIntervalMs = 15 * SECONDS_IN_MINUTE * 1000; // Send stats to phone every 15 minutes
diff --git a/src/modules/Telemetry/EnvironmentTelemetry.cpp b/src/modules/Telemetry/EnvironmentTelemetry.cpp
index 452c7747b..008da5c71 100644
--- a/src/modules/Telemetry/EnvironmentTelemetry.cpp
+++ b/src/modules/Telemetry/EnvironmentTelemetry.cpp
@@ -18,6 +18,7 @@
 #include 
 #include 
 
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL
 // Sensors
 #include "Sensor/AHT10.h"
 #include "Sensor/BME280Sensor.h"
@@ -25,6 +26,7 @@
 #include "Sensor/BMP085Sensor.h"
 #include "Sensor/BMP280Sensor.h"
 #include "Sensor/BMP3XXSensor.h"
+#include "Sensor/CGRadSensSensor.h"
 #include "Sensor/DFRobotLarkSensor.h"
 #include "Sensor/LPS22HBSensor.h"
 #include "Sensor/MCP9808Sensor.h"
@@ -35,7 +37,6 @@
 #include "Sensor/SHT31Sensor.h"
 #include "Sensor/SHT4XSensor.h"
 #include "Sensor/SHTC3Sensor.h"
-#include "Sensor/T1000xSensor.h"
 #include "Sensor/TSL2591Sensor.h"
 #include "Sensor/VEML7700Sensor.h"
 
@@ -57,10 +58,12 @@ MLX90632Sensor mlx90632Sensor;
 DFRobotLarkSensor dfRobotLarkSensor;
 NAU7802Sensor nau7802Sensor;
 BMP3XXSensor bmp3xxSensor;
+CGRadSensSensor cgRadSens;
+#endif
 #ifdef T1000X_SENSOR_EN
+#include "Sensor/T1000xSensor.h"
 T1000xSensor t1000xSensor;
 #endif
-
 #define FAILED_STATE_SENSOR_READ_MULTIPLIER 10
 #define DISPLAY_RECEIVEID_MEASUREMENTS_ON_SCREEN true
 
@@ -73,8 +76,8 @@ int32_t EnvironmentTelemetryModule::runOnce()
         sleepOnNextExecution = false;
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.environment_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
-        LOG_DEBUG("Sleeping for %ims, then awaking to send metrics again.", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;
@@ -97,12 +100,12 @@ int32_t EnvironmentTelemetryModule::runOnce()
         firstTime = 0;
 
         if (moduleConfig.telemetry.environment_measurement_enabled) {
-            LOG_INFO("Environment Telemetry: Initializing");
+            LOG_INFO("Environment Telemetry: init");
             // it's possible to have this module enabled, only for displaying values on the screen.
             // therefore, we should only enable the sensor loop if measurement is also enabled
 #ifdef T1000X_SENSOR_EN
             result = t1000xSensor.runOnce();
-#else
+#elif !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL
             if (dfRobotLarkSensor.hasSensor())
                 result = dfRobotLarkSensor.runOnce();
             if (bmp085Sensor.hasSensor())
@@ -147,6 +150,8 @@ int32_t EnvironmentTelemetryModule::runOnce()
                 result = nau7802Sensor.runOnce();
             if (max17048Sensor.hasSensor())
                 result = max17048Sensor.runOnce();
+            if (cgRadSens.hasSensor())
+                result = cgRadSens.runOnce();
 #endif
         }
         return result;
@@ -155,8 +160,10 @@ int32_t EnvironmentTelemetryModule::runOnce()
         if (!moduleConfig.telemetry.environment_measurement_enabled) {
             return disable();
         } else {
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL
             if (bme680Sensor.hasSensor())
                 result = bme680Sensor.runTrigger();
+#endif
         }
 
         if (((lastSentToMesh == 0) ||
@@ -210,16 +217,19 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
     // Display "Env. From: ..." on its own
     display->drawString(x, y, "Env. From: " + String(lastSender) + "(" + String(agoSecs) + "s)");
 
-    String last_temp = String(lastMeasurement.variant.environment_metrics.temperature, 0) + "°C";
-    if (moduleConfig.telemetry.environment_display_fahrenheit) {
-        last_temp =
-            String(UnitConversions::CelsiusToFahrenheit(lastMeasurement.variant.environment_metrics.temperature), 0) + "°F";
-    }
+    if (lastMeasurement.variant.environment_metrics.has_temperature ||
+        lastMeasurement.variant.environment_metrics.has_relative_humidity) {
+        String last_temp = String(lastMeasurement.variant.environment_metrics.temperature, 0) + "°C";
+        if (moduleConfig.telemetry.environment_display_fahrenheit) {
+            last_temp =
+                String(UnitConversions::CelsiusToFahrenheit(lastMeasurement.variant.environment_metrics.temperature), 0) + "°F";
+        }
 
-    // Continue with the remaining details
-    display->drawString(x, y += _fontHeight(FONT_SMALL),
-                        "Temp/Hum: " + last_temp + " / " +
-                            String(lastMeasurement.variant.environment_metrics.relative_humidity, 0) + "%");
+        // Continue with the remaining details
+        display->drawString(x, y += _fontHeight(FONT_SMALL),
+                            "Temp/Hum: " + last_temp + " / " +
+                                String(lastMeasurement.variant.environment_metrics.relative_humidity, 0) + "%");
+    }
 
     if (lastMeasurement.variant.environment_metrics.barometric_pressure != 0) {
         display->drawString(x, y += _fontHeight(FONT_SMALL),
@@ -243,6 +253,10 @@ void EnvironmentTelemetryModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiSt
     if (lastMeasurement.variant.environment_metrics.weight != 0)
         display->drawString(x, y += _fontHeight(FONT_SMALL),
                             "Weight: " + String(lastMeasurement.variant.environment_metrics.weight, 0) + "kg");
+
+    if (lastMeasurement.variant.environment_metrics.radiation != 0)
+        display->drawString(x, y += _fontHeight(FONT_SMALL),
+                            "Rad: " + String(lastMeasurement.variant.environment_metrics.radiation, 2) + "µR/h");
 }
 
 bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPacket &mp, meshtastic_Telemetry *t)
@@ -263,6 +277,8 @@ bool EnvironmentTelemetryModule::handleReceivedProtobuf(const meshtastic_MeshPac
                  t->variant.environment_metrics.wind_speed, t->variant.environment_metrics.wind_direction,
                  t->variant.environment_metrics.weight);
 
+        LOG_INFO("(Received from %s): radiation=%fµR/h", sender, t->variant.environment_metrics.radiation);
+
 #endif
         // release previous packet before occupying a new spot
         if (lastMeasurementPacket != nullptr)
@@ -376,18 +392,24 @@ bool EnvironmentTelemetryModule::getEnvironmentTelemetry(meshtastic_Telemetry *m
             LOG_INFO("AHTX0+BMP280 module detected: using temp from BMP280 and humy from AHTX0");
             aht10Sensor.getMetrics(&m_ahtx);
             m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
+            m->variant.environment_metrics.has_relative_humidity = m_ahtx.variant.environment_metrics.has_relative_humidity;
         } else {
             // prefer bmp3xx temp if both sensors are present, fetch only humidity
             meshtastic_Telemetry m_ahtx = meshtastic_Telemetry_init_zero;
             LOG_INFO("AHTX0+BMP3XX module detected: using temp from BMP3XX and humy from AHTX0");
             aht10Sensor.getMetrics(&m_ahtx);
             m->variant.environment_metrics.relative_humidity = m_ahtx.variant.environment_metrics.relative_humidity;
+            m->variant.environment_metrics.has_relative_humidity = m_ahtx.variant.environment_metrics.has_relative_humidity;
         }
     }
     if (max17048Sensor.hasSensor()) {
         valid = valid && max17048Sensor.getMetrics(m);
         hasSensor = true;
     }
+    if (cgRadSens.hasSensor()) {
+        valid = valid && cgRadSens.getMetrics(m);
+        hasSensor = true;
+    }
 
 #endif
     return valid && hasSensor;
@@ -411,7 +433,7 @@ meshtastic_MeshPacket *EnvironmentTelemetryModule::allocReply()
         if (decoded->which_variant == meshtastic_Telemetry_environment_metrics_tag) {
             meshtastic_Telemetry m = meshtastic_Telemetry_init_zero;
             if (getEnvironmentTelemetry(&m)) {
-                LOG_INFO("Environment telemetry replying to request");
+                LOG_INFO("Environment telemetry reply to request");
                 return allocDataProtobuf(m);
             } else {
                 return NULL;
@@ -431,16 +453,18 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 #else
     if (getEnvironmentTelemetry(&m)) {
 #endif
-        LOG_INFO("(Sending): barometric_pressure=%f, current=%f, gas_resistance=%f, relative_humidity=%f, temperature=%f",
+        LOG_INFO("Send: barometric_pressure=%f, current=%f, gas_resistance=%f, relative_humidity=%f, temperature=%f",
                  m.variant.environment_metrics.barometric_pressure, m.variant.environment_metrics.current,
                  m.variant.environment_metrics.gas_resistance, m.variant.environment_metrics.relative_humidity,
                  m.variant.environment_metrics.temperature);
-        LOG_INFO("(Sending): voltage=%f, IAQ=%d, distance=%f, lux=%f", m.variant.environment_metrics.voltage,
+        LOG_INFO("Send: voltage=%f, IAQ=%d, distance=%f, lux=%f", m.variant.environment_metrics.voltage,
                  m.variant.environment_metrics.iaq, m.variant.environment_metrics.distance, m.variant.environment_metrics.lux);
 
-        LOG_INFO("(Sending): wind speed=%fm/s, direction=%d degrees, weight=%fkg", m.variant.environment_metrics.wind_speed,
+        LOG_INFO("Send: wind speed=%fm/s, direction=%d degrees, weight=%fkg", m.variant.environment_metrics.wind_speed,
                  m.variant.environment_metrics.wind_direction, m.variant.environment_metrics.weight);
 
+        LOG_INFO("Send: radiation=%fµR/h", m.variant.environment_metrics.radiation);
+
         sensor_read_error_count = 0;
 
         meshtastic_MeshPacket *p = allocDataProtobuf(m);
@@ -456,14 +480,14 @@ bool EnvironmentTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         lastMeasurementPacket = packetPool.allocCopy(*p);
         if (phoneOnly) {
-            LOG_INFO("Sending packet to phone");
+            LOG_INFO("Send packet to phone");
             service->sendToPhone(p);
         } else {
-            LOG_INFO("Sending packet to mesh");
+            LOG_INFO("Send packet to mesh");
             service->sendToMesh(p, RX_SRC_LOCAL, true);
 
             if (config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR && config.power.is_power_saving) {
-                LOG_DEBUG("Starting next execution in 5 seconds and then going to sleep.");
+                LOG_DEBUG("Start next execution in 5s, then sleep");
                 sleepOnNextExecution = true;
                 setIntervalFromNow(5000);
             }
@@ -478,6 +502,7 @@ AdminMessageHandleResult EnvironmentTelemetryModule::handleAdminMessageForModule
                                                                                  meshtastic_AdminMessage *response)
 {
     AdminMessageHandleResult result = AdminMessageHandleResult::NOT_HANDLED;
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL
     if (dfRobotLarkSensor.hasSensor()) {
         result = dfRobotLarkSensor.handleAdminMessage(mp, request, response);
         if (result != AdminMessageHandleResult::NOT_HANDLED)
@@ -583,6 +608,12 @@ AdminMessageHandleResult EnvironmentTelemetryModule::handleAdminMessageForModule
         if (result != AdminMessageHandleResult::NOT_HANDLED)
             return result;
     }
+    if (cgRadSens.hasSensor()) {
+        result = cgRadSens.handleAdminMessage(mp, request, response);
+        if (result != AdminMessageHandleResult::NOT_HANDLED)
+            return result;
+    }
+#endif
     return result;
 }
 
diff --git a/src/modules/Telemetry/EnvironmentTelemetry.h b/src/modules/Telemetry/EnvironmentTelemetry.h
index e680d8bbd..6e0f850ef 100644
--- a/src/modules/Telemetry/EnvironmentTelemetry.h
+++ b/src/modules/Telemetry/EnvironmentTelemetry.h
@@ -17,7 +17,7 @@ class EnvironmentTelemetryModule : private concurrency::OSThread, public Protobu
 
   public:
     EnvironmentTelemetryModule()
-        : concurrency::OSThread("EnvironmentTelemetryModule"),
+        : concurrency::OSThread("EnvironmentTelemetry"),
           ProtobufModule("EnvironmentTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         lastMeasurementPacket = nullptr;
diff --git a/src/modules/Telemetry/HealthTelemetry.cpp b/src/modules/Telemetry/HealthTelemetry.cpp
index 9b86ae2b8..1b9b49813 100644
--- a/src/modules/Telemetry/HealthTelemetry.cpp
+++ b/src/modules/Telemetry/HealthTelemetry.cpp
@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY && !defined(ARCH_PORTDUINO)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "Default.h"
@@ -39,8 +39,8 @@ int32_t HealthTelemetryModule::runOnce()
         sleepOnNextExecution = false;
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.health_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
-        LOG_DEBUG("Sleeping for %ims, then awaking to send metrics again.", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;
@@ -55,7 +55,7 @@ int32_t HealthTelemetryModule::runOnce()
         firstTime = false;
 
         if (moduleConfig.telemetry.health_measurement_enabled) {
-            LOG_INFO("Health Telemetry: Initializing");
+            LOG_INFO("Health Telemetry: init");
             // Initialize sensors
             if (mlx90614Sensor.hasSensor())
                 result = mlx90614Sensor.runOnce();
@@ -195,7 +195,7 @@ meshtastic_MeshPacket *HealthTelemetryModule::allocReply()
         if (decoded->which_variant == meshtastic_Telemetry_health_metrics_tag) {
             meshtastic_Telemetry m = meshtastic_Telemetry_init_zero;
             if (getHealthTelemetry(&m)) {
-                LOG_INFO("Health telemetry replying to request");
+                LOG_INFO("Health telemetry reply to request");
                 return allocDataProtobuf(m);
             } else {
                 return NULL;
@@ -211,7 +211,7 @@ bool HealthTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
     m.which_variant = meshtastic_Telemetry_health_metrics_tag;
     m.time = getTime();
     if (getHealthTelemetry(&m)) {
-        LOG_INFO("(Sending): temperature=%f, heart_bpm=%d, spO2=%d", m.variant.health_metrics.temperature,
+        LOG_INFO("Send: temperature=%f, heart_bpm=%d, spO2=%d", m.variant.health_metrics.temperature,
                  m.variant.health_metrics.heart_bpm, m.variant.health_metrics.spO2);
 
         sensor_read_error_count = 0;
@@ -229,14 +229,14 @@ bool HealthTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         lastMeasurementPacket = packetPool.allocCopy(*p);
         if (phoneOnly) {
-            LOG_INFO("Sending packet to phone");
+            LOG_INFO("Send packet to phone");
             service->sendToPhone(p);
         } else {
-            LOG_INFO("Sending packet to mesh");
+            LOG_INFO("Send packet to mesh");
             service->sendToMesh(p, RX_SRC_LOCAL, true);
 
             if (config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR && config.power.is_power_saving) {
-                LOG_DEBUG("Starting next execution in 5 seconds and then going to sleep.");
+                LOG_DEBUG("Start next execution in 5s, then sleep");
                 sleepOnNextExecution = true;
                 setIntervalFromNow(5000);
             }
@@ -246,4 +246,4 @@ bool HealthTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
     return false;
 }
 
-#endif
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/HealthTelemetry.h b/src/modules/Telemetry/HealthTelemetry.h
index 4ad0da838..01e4c2372 100644
--- a/src/modules/Telemetry/HealthTelemetry.h
+++ b/src/modules/Telemetry/HealthTelemetry.h
@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY && !defined(ARCH_PORTDUINO)
 
 #pragma once
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
@@ -16,7 +16,7 @@ class HealthTelemetryModule : private concurrency::OSThread, public ProtobufModu
 
   public:
     HealthTelemetryModule()
-        : concurrency::OSThread("HealthTelemetryModule"),
+        : concurrency::OSThread("HealthTelemetry"),
           ProtobufModule("HealthTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         lastMeasurementPacket = nullptr;
@@ -57,4 +57,4 @@ class HealthTelemetryModule : private concurrency::OSThread, public ProtobufModu
     uint32_t sensor_read_error_count = 0;
 };
 
-#endif
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/PowerTelemetry.cpp b/src/modules/Telemetry/PowerTelemetry.cpp
index c5f19b295..10133fca5 100644
--- a/src/modules/Telemetry/PowerTelemetry.cpp
+++ b/src/modules/Telemetry/PowerTelemetry.cpp
@@ -27,8 +27,8 @@ int32_t PowerTelemetryModule::runOnce()
         sleepOnNextExecution = false;
         uint32_t nightyNightMs = Default::getConfiguredOrDefaultMs(moduleConfig.telemetry.power_update_interval,
                                                                    default_telemetry_broadcast_interval_secs);
-        LOG_DEBUG("Sleeping for %ims, then awaking to send metrics again.", nightyNightMs);
-        doDeepSleep(nightyNightMs, true);
+        LOG_DEBUG("Sleep for %ims, then awake to send metrics again", nightyNightMs);
+        doDeepSleep(nightyNightMs, true, false);
     }
 
     uint32_t result = UINT32_MAX;
@@ -51,11 +51,13 @@ int32_t PowerTelemetryModule::runOnce()
         firstTime = 0;
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
         if (moduleConfig.telemetry.power_measurement_enabled) {
-            LOG_INFO("Power Telemetry: Initializing");
+            LOG_INFO("Power Telemetry: init");
             // it's possible to have this module enabled, only for displaying values on the screen.
             // therefore, we should only enable the sensor loop if measurement is also enabled
             if (ina219Sensor.hasSensor() && !ina219Sensor.isInitialized())
                 result = ina219Sensor.runOnce();
+            if (ina226Sensor.hasSensor() && !ina226Sensor.isInitialized())
+                result = ina226Sensor.runOnce();
             if (ina260Sensor.hasSensor() && !ina260Sensor.isInitialized())
                 result = ina260Sensor.runOnce();
             if (ina3221Sensor.hasSensor() && !ina3221Sensor.isInitialized())
@@ -170,6 +172,8 @@ bool PowerTelemetryModule::getPowerTelemetry(meshtastic_Telemetry *m)
 #if HAS_TELEMETRY && !defined(ARCH_PORTDUINO)
     if (ina219Sensor.hasSensor())
         valid = ina219Sensor.getMetrics(m);
+    if (ina226Sensor.hasSensor())
+        valid = ina226Sensor.getMetrics(m);
     if (ina260Sensor.hasSensor())
         valid = ina260Sensor.getMetrics(m);
     if (ina3221Sensor.hasSensor())
@@ -199,7 +203,7 @@ meshtastic_MeshPacket *PowerTelemetryModule::allocReply()
         if (decoded->which_variant == meshtastic_Telemetry_power_metrics_tag) {
             meshtastic_Telemetry m = meshtastic_Telemetry_init_zero;
             if (getPowerTelemetry(&m)) {
-                LOG_INFO("Power telemetry replying to request");
+                LOG_INFO("Power telemetry reply to request");
                 return allocDataProtobuf(m);
             } else {
                 return NULL;
@@ -216,7 +220,7 @@ bool PowerTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
     m.which_variant = meshtastic_Telemetry_power_metrics_tag;
     m.time = getTime();
     if (getPowerTelemetry(&m)) {
-        LOG_INFO("(Sending): ch1_voltage=%f, ch1_current=%f, ch2_voltage=%f, ch2_current=%f, "
+        LOG_INFO("Send: ch1_voltage=%f, ch1_current=%f, ch2_voltage=%f, ch2_current=%f, "
                  "ch3_voltage=%f, ch3_current=%f",
                  m.variant.power_metrics.ch1_voltage, m.variant.power_metrics.ch1_current, m.variant.power_metrics.ch2_voltage,
                  m.variant.power_metrics.ch2_current, m.variant.power_metrics.ch3_voltage, m.variant.power_metrics.ch3_current);
@@ -236,14 +240,14 @@ bool PowerTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
 
         lastMeasurementPacket = packetPool.allocCopy(*p);
         if (phoneOnly) {
-            LOG_INFO("Sending packet to phone");
+            LOG_INFO("Send packet to phone");
             service->sendToPhone(p);
         } else {
-            LOG_INFO("Sending packet to mesh");
+            LOG_INFO("Send packet to mesh");
             service->sendToMesh(p, RX_SRC_LOCAL, true);
 
             if (config.device.role == meshtastic_Config_DeviceConfig_Role_SENSOR && config.power.is_power_saving) {
-                LOG_DEBUG("Starting next execution in 5s then going to sleep.");
+                LOG_DEBUG("Start next execution in 5s then sleep");
                 sleepOnNextExecution = true;
                 setIntervalFromNow(5000);
             }
@@ -253,4 +257,4 @@ bool PowerTelemetryModule::sendTelemetry(NodeNum dest, bool phoneOnly)
     return false;
 }
 
-#endif
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/PowerTelemetry.h b/src/modules/Telemetry/PowerTelemetry.h
index f8248304e..b9ec6edc1 100644
--- a/src/modules/Telemetry/PowerTelemetry.h
+++ b/src/modules/Telemetry/PowerTelemetry.h
@@ -17,7 +17,7 @@ class PowerTelemetryModule : private concurrency::OSThread, public ProtobufModul
 
   public:
     PowerTelemetryModule()
-        : concurrency::OSThread("PowerTelemetryModule"),
+        : concurrency::OSThread("PowerTelemetry"),
           ProtobufModule("PowerTelemetry", meshtastic_PortNum_TELEMETRY_APP, &meshtastic_Telemetry_msg)
     {
         lastMeasurementPacket = nullptr;
diff --git a/src/modules/Telemetry/Sensor/AHT10.cpp b/src/modules/Telemetry/Sensor/AHT10.cpp
index 039b7da41..4d8c80200 100644
--- a/src/modules/Telemetry/Sensor/AHT10.cpp
+++ b/src/modules/Telemetry/Sensor/AHT10.cpp
@@ -27,7 +27,7 @@ void AHT10Sensor::setup() {}
 
 bool AHT10Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
-    LOG_DEBUG("AHT10Sensor::getMetrics");
+    LOG_DEBUG("AHT10 getMetrics");
 
     sensors_event_t humidity, temp;
     aht10.getEvent(&humidity, &temp);
diff --git a/src/modules/Telemetry/Sensor/BME280Sensor.cpp b/src/modules/Telemetry/Sensor/BME280Sensor.cpp
index 9f5cf6155..65dab5105 100644
--- a/src/modules/Telemetry/Sensor/BME280Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/BME280Sensor.cpp
@@ -35,7 +35,7 @@ bool BME280Sensor::getMetrics(meshtastic_Telemetry *measurement)
     measurement->variant.environment_metrics.has_relative_humidity = true;
     measurement->variant.environment_metrics.has_barometric_pressure = true;
 
-    LOG_DEBUG("BME280Sensor::getMetrics");
+    LOG_DEBUG("BME280 getMetrics");
     bme280.takeForcedMeasurement();
     measurement->variant.environment_metrics.temperature = bme280.readTemperature();
     measurement->variant.environment_metrics.relative_humidity = bme280.readHumidity();
diff --git a/src/modules/Telemetry/Sensor/BME680Sensor.cpp b/src/modules/Telemetry/Sensor/BME680Sensor.cpp
index 21c74c52f..18515d0a8 100644
--- a/src/modules/Telemetry/Sensor/BME680Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/BME680Sensor.cpp
@@ -80,9 +80,9 @@ void BME680Sensor::loadState()
         file.read((uint8_t *)&bsecState, BSEC_MAX_STATE_BLOB_SIZE);
         file.close();
         bme680.setState(bsecState);
-        LOG_INFO("%s state read from %s.", sensorName, bsecConfigFileName);
+        LOG_INFO("%s state read from %s", sensorName, bsecConfigFileName);
     } else {
-        LOG_INFO("No %s state found (File: %s).", sensorName, bsecConfigFileName);
+        LOG_INFO("No %s state found (File: %s)", sensorName, bsecConfigFileName);
     }
 #else
     LOG_ERROR("ERROR: Filesystem not implemented");
@@ -119,12 +119,12 @@ void BME680Sensor::updateState()
         }
         auto file = FSCom.open(bsecConfigFileName, FILE_O_WRITE);
         if (file) {
-            LOG_INFO("%s state write to %s.", sensorName, bsecConfigFileName);
+            LOG_INFO("%s state write to %s", sensorName, bsecConfigFileName);
             file.write((uint8_t *)&bsecState, BSEC_MAX_STATE_BLOB_SIZE);
             file.flush();
             file.close();
         } else {
-            LOG_INFO("Can't write %s state (File: %s).", sensorName, bsecConfigFileName);
+            LOG_INFO("Can't write %s state (File: %s)", sensorName, bsecConfigFileName);
         }
     }
 #else
@@ -145,4 +145,4 @@ void BME680Sensor::checkStatus(String functionName)
         LOG_WARN("%s BME68X code: %s", functionName.c_str(), String(bme680.sensor.status).c_str());
 }
 
-#endif
\ No newline at end of file
+#endif
diff --git a/src/modules/Telemetry/Sensor/BMP085Sensor.cpp b/src/modules/Telemetry/Sensor/BMP085Sensor.cpp
index 40ff996f2..7f59f14f0 100644
--- a/src/modules/Telemetry/Sensor/BMP085Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/BMP085Sensor.cpp
@@ -29,7 +29,7 @@ bool BMP085Sensor::getMetrics(meshtastic_Telemetry *measurement)
     measurement->variant.environment_metrics.has_temperature = true;
     measurement->variant.environment_metrics.has_barometric_pressure = true;
 
-    LOG_DEBUG("BMP085Sensor::getMetrics");
+    LOG_DEBUG("BMP085 getMetrics");
     measurement->variant.environment_metrics.temperature = bmp085.readTemperature();
     measurement->variant.environment_metrics.barometric_pressure = bmp085.readPressure() / 100.0F;
 
diff --git a/src/modules/Telemetry/Sensor/BMP280Sensor.cpp b/src/modules/Telemetry/Sensor/BMP280Sensor.cpp
index 185e9b8ec..56a8bc080 100644
--- a/src/modules/Telemetry/Sensor/BMP280Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/BMP280Sensor.cpp
@@ -34,7 +34,7 @@ bool BMP280Sensor::getMetrics(meshtastic_Telemetry *measurement)
     measurement->variant.environment_metrics.has_temperature = true;
     measurement->variant.environment_metrics.has_barometric_pressure = true;
 
-    LOG_DEBUG("BMP280Sensor::getMetrics");
+    LOG_DEBUG("BMP280 getMetrics");
     bmp280.takeForcedMeasurement();
     measurement->variant.environment_metrics.temperature = bmp280.readTemperature();
     measurement->variant.environment_metrics.barometric_pressure = bmp280.readPressure() / 100.0F;
diff --git a/src/modules/Telemetry/Sensor/BMP3XXSensor.cpp b/src/modules/Telemetry/Sensor/BMP3XXSensor.cpp
index 4362396b1..69feaf3d9 100644
--- a/src/modules/Telemetry/Sensor/BMP3XXSensor.cpp
+++ b/src/modules/Telemetry/Sensor/BMP3XXSensor.cpp
@@ -50,11 +50,11 @@ bool BMP3XXSensor::getMetrics(meshtastic_Telemetry *measurement)
         measurement->variant.environment_metrics.barometric_pressure = static_cast(bmp3xx->pressure) / 100.0F;
         measurement->variant.environment_metrics.relative_humidity = 0.0f;
 
-        LOG_DEBUG("BMP3XXSensor::getMetrics id: %i temp: %.1f press %.1f", measurement->which_variant,
+        LOG_DEBUG("BMP3XX getMetrics id: %i temp: %.1f press %.1f", measurement->which_variant,
                   measurement->variant.environment_metrics.temperature,
                   measurement->variant.environment_metrics.barometric_pressure);
     } else {
-        LOG_DEBUG("BMP3XXSensor::getMetrics id: %i", measurement->which_variant);
+        LOG_DEBUG("BMP3XX getMetrics id: %i", measurement->which_variant);
     }
     return true;
 }
diff --git a/src/modules/Telemetry/Sensor/CGRadSensSensor.cpp b/src/modules/Telemetry/Sensor/CGRadSensSensor.cpp
new file mode 100644
index 000000000..5e69cc22f
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/CGRadSensSensor.cpp
@@ -0,0 +1,75 @@
+/*
+ *  Support for the ClimateGuard RadSens Dosimeter
+ *  A fun and educational sensor for Meshtastic; not for safety critical applications.
+ */
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CGRadSensSensor.h"
+#include "TelemetrySensor.h"
+#include 
+#include 
+
+CGRadSensSensor::CGRadSensSensor() : TelemetrySensor(meshtastic_TelemetrySensorType_RADSENS, "RadSens") {}
+
+int32_t CGRadSensSensor::runOnce()
+{
+    // Initialize the sensor following the same pattern as RCWL9620Sensor
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    status = true;
+    begin(nodeTelemetrySensorsMap[sensorType].second, nodeTelemetrySensorsMap[sensorType].first);
+
+    return initI2CSensor();
+}
+
+void CGRadSensSensor::setup() {}
+
+void CGRadSensSensor::begin(TwoWire *wire, uint8_t addr)
+{
+    // Store the Wire and address to the sensor following the same pattern as RCWL9620Sensor
+    _wire = wire;
+    _addr = addr;
+    _wire->begin();
+}
+
+float CGRadSensSensor::getStaticRadiation()
+{
+    // Read a register, following the same pattern as the RCWL9620Sensor
+    uint32_t data;
+    _wire->beginTransmission(_addr); // Transfer data to addr.
+    _wire->write(0x06);              // Radiation intensity (static period T = 500 sec)
+    if (_wire->endTransmission() == 0) {
+        if (_wire->requestFrom(_addr, (uint8_t)3)) {
+            ; // Request 3 bytes
+            data = _wire->read();
+            data <<= 8;
+            data |= _wire->read();
+            data <<= 8;
+            data |= _wire->read();
+
+            // As per the data sheet for the RadSens
+            // Register 0x06 contains the reading in 0.1 * μR / h
+            float microRadPerHr = float(data) / 10.0;
+            return microRadPerHr;
+        }
+    }
+    return -1.0;
+}
+
+bool CGRadSensSensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    // Store the meansurement in the the appropriate fields of the protobuf
+    measurement->variant.environment_metrics.has_radiation = true;
+
+    LOG_DEBUG("CGRADSENS getMetrics");
+    measurement->variant.environment_metrics.radiation = getStaticRadiation();
+
+    return true;
+}
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/CGRadSensSensor.h b/src/modules/Telemetry/Sensor/CGRadSensSensor.h
new file mode 100644
index 000000000..3b15a19a2
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/CGRadSensSensor.h
@@ -0,0 +1,30 @@
+/*
+ *  Support for the ClimateGuard RadSens Dosimeter
+ *  A fun and educational sensor for Meshtastic; not for safety critical applications.
+ */
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "TelemetrySensor.h"
+#include 
+
+class CGRadSensSensor : public TelemetrySensor
+{
+  private:
+    uint8_t _addr = 0x66;
+    TwoWire *_wire = &Wire;
+
+  protected:
+    virtual void setup() override;
+    void begin(TwoWire *wire = &Wire, uint8_t addr = 0x66);
+    float getStaticRadiation();
+
+  public:
+    CGRadSensSensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+};
+
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/CurrentSensor.h b/src/modules/Telemetry/Sensor/CurrentSensor.h
new file mode 100644
index 000000000..9827a9aa4
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/CurrentSensor.h
@@ -0,0 +1,13 @@
+#include "configuration.h"
+
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#pragma once
+
+class CurrentSensor
+{
+  public:
+    virtual int16_t getCurrentMa() = 0;
+};
+
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA219Sensor.cpp b/src/modules/Telemetry/Sensor/INA219Sensor.cpp
index de69163b4..ea47e265d 100644
--- a/src/modules/Telemetry/Sensor/INA219Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/INA219Sensor.cpp
@@ -45,4 +45,9 @@ uint16_t INA219Sensor::getBusVoltageMv()
     return lround(ina219.getBusVoltage_V() * 1000);
 }
 
+int16_t INA219Sensor::getCurrentMa()
+{
+    return lround(ina219.getCurrent_mA());
+}
+
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA219Sensor.h b/src/modules/Telemetry/Sensor/INA219Sensor.h
index 9dded067b..9b6a2fcca 100644
--- a/src/modules/Telemetry/Sensor/INA219Sensor.h
+++ b/src/modules/Telemetry/Sensor/INA219Sensor.h
@@ -3,11 +3,12 @@
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
 #include "TelemetrySensor.h"
 #include "VoltageSensor.h"
 #include 
 
-class INA219Sensor : public TelemetrySensor, VoltageSensor
+class INA219Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
 {
   private:
     Adafruit_INA219 ina219;
@@ -20,6 +21,7 @@ class INA219Sensor : public TelemetrySensor, VoltageSensor
     virtual int32_t runOnce() override;
     virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
 };
 
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA226Sensor.cpp b/src/modules/Telemetry/Sensor/INA226Sensor.cpp
new file mode 100644
index 000000000..1ee7cd92e
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/INA226Sensor.cpp
@@ -0,0 +1,58 @@
+#include "configuration.h"
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "INA226.h"
+#include "INA226Sensor.h"
+#include "TelemetrySensor.h"
+
+INA226Sensor::INA226Sensor() : TelemetrySensor(meshtastic_TelemetrySensorType_INA226, "INA226") {}
+
+int32_t INA226Sensor::runOnce()
+{
+    LOG_INFO("Init sensor: %s", sensorName);
+    if (!hasSensor()) {
+        return DEFAULT_SENSOR_MINIMUM_WAIT_TIME_BETWEEN_READS;
+    }
+
+    begin(nodeTelemetrySensorsMap[sensorType].second, nodeTelemetrySensorsMap[sensorType].first);
+
+    if (!status) {
+        status = ina226.begin();
+    }
+    return initI2CSensor();
+}
+
+void INA226Sensor::setup() {}
+
+void INA226Sensor::begin(TwoWire *wire, uint8_t addr)
+{
+    _wire = wire;
+    _addr = addr;
+    ina226 = INA226(_addr, _wire);
+    _wire->begin();
+}
+
+bool INA226Sensor::getMetrics(meshtastic_Telemetry *measurement)
+{
+    measurement->variant.environment_metrics.has_voltage = true;
+    measurement->variant.environment_metrics.has_current = true;
+
+    // mV conversion to V
+    measurement->variant.environment_metrics.voltage = ina226.getBusVoltage() / 1000;
+    measurement->variant.environment_metrics.current = ina226.getCurrent_mA();
+    return true;
+}
+
+uint16_t INA226Sensor::getBusVoltageMv()
+{
+    return lround(ina226.getBusVoltage());
+}
+
+int16_t INA226Sensor::getCurrentMa()
+{
+    return lround(ina226.getCurrent_mA());
+}
+
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA226Sensor.h b/src/modules/Telemetry/Sensor/INA226Sensor.h
new file mode 100644
index 000000000..2f71c5b86
--- /dev/null
+++ b/src/modules/Telemetry/Sensor/INA226Sensor.h
@@ -0,0 +1,30 @@
+#include "configuration.h"
+
+#if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
+
+#include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
+#include "TelemetrySensor.h"
+#include "VoltageSensor.h"
+#include 
+
+class INA226Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
+{
+  private:
+    uint8_t _addr = INA_ADDR;
+    TwoWire *_wire = &Wire;
+    INA226 ina226 = INA226(_addr, _wire);
+
+  protected:
+    virtual void setup() override;
+    void begin(TwoWire *wire = &Wire, uint8_t addr = INA_ADDR);
+
+  public:
+    INA226Sensor();
+    virtual int32_t runOnce() override;
+    virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
+    virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
+};
+
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA3221Sensor.cpp b/src/modules/Telemetry/Sensor/INA3221Sensor.cpp
index ed09856e2..7ac11dfde 100644
--- a/src/modules/Telemetry/Sensor/INA3221Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/INA3221Sensor.cpp
@@ -102,4 +102,9 @@ uint16_t INA3221Sensor::getBusVoltageMv()
     return lround(ina3221.getVoltage(BAT_CH) * 1000);
 }
 
+int16_t INA3221Sensor::getCurrentMa()
+{
+    return lround(ina3221.getCurrent(BAT_CH));
+}
+
 #endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/INA3221Sensor.h b/src/modules/Telemetry/Sensor/INA3221Sensor.h
index d5121aab6..8eeda3e02 100644
--- a/src/modules/Telemetry/Sensor/INA3221Sensor.h
+++ b/src/modules/Telemetry/Sensor/INA3221Sensor.h
@@ -3,11 +3,12 @@
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
+#include "CurrentSensor.h"
 #include "TelemetrySensor.h"
 #include "VoltageSensor.h"
 #include 
 
-class INA3221Sensor : public TelemetrySensor, VoltageSensor
+class INA3221Sensor : public TelemetrySensor, VoltageSensor, CurrentSensor
 {
   private:
     INA3221 ina3221 = INA3221(INA3221_ADDR42_SDA);
@@ -35,6 +36,7 @@ class INA3221Sensor : public TelemetrySensor, VoltageSensor
     int32_t runOnce() override;
     bool getMetrics(meshtastic_Telemetry *measurement) override;
     virtual uint16_t getBusVoltageMv() override;
+    virtual int16_t getCurrentMa() override;
 };
 
 struct _INA3221Measurement {
diff --git a/src/modules/Telemetry/Sensor/MAX17048Sensor.cpp b/src/modules/Telemetry/Sensor/MAX17048Sensor.cpp
index 02ab9df01..3aacf9cd7 100644
--- a/src/modules/Telemetry/Sensor/MAX17048Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/MAX17048Sensor.cpp
@@ -27,7 +27,7 @@ bool MAX17048Singleton::isBatteryCharging()
 {
     float volts = cellVoltage();
     if (isnan(volts)) {
-        LOG_DEBUG("%s::isBatteryCharging is not connected", sensorStr);
+        LOG_DEBUG("%s::isBatteryCharging not connected", sensorStr);
         return 0;
     }
 
@@ -140,11 +140,11 @@ void MAX17048Sensor::setup() {}
 
 bool MAX17048Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
-    LOG_DEBUG("MAX17048Sensor::getMetrics id: %i", measurement->which_variant);
+    LOG_DEBUG("MAX17048 getMetrics id: %i", measurement->which_variant);
 
     float volts = max17048->cellVoltage();
     if (isnan(volts)) {
-        LOG_DEBUG("MAX17048Sensor::getMetrics battery is not connected");
+        LOG_DEBUG("MAX17048 getMetrics battery is not connected");
         return false;
     }
 
@@ -153,7 +153,7 @@ bool MAX17048Sensor::getMetrics(meshtastic_Telemetry *measurement)
     soc = clamp(soc, 0.0f, 100.0f);      // clamp soc between 0 and 100%
     float ttg = (100.0f - soc) / rate;   // calculate hours to charge/discharge
 
-    LOG_DEBUG("MAX17048Sensor::getMetrics volts: %.3fV soc: %.1f%% ttg: %.1f hours", volts, soc, ttg);
+    LOG_DEBUG("MAX17048 getMetrics volts: %.3fV soc: %.1f%% ttg: %.1f hours", volts, soc, ttg);
     if ((int)measurement->which_variant == meshtastic_Telemetry_power_metrics_tag) {
         measurement->variant.power_metrics.has_ch1_voltage = true;
         measurement->variant.power_metrics.ch1_voltage = volts;
diff --git a/src/modules/Telemetry/Sensor/MAX30102Sensor.cpp b/src/modules/Telemetry/Sensor/MAX30102Sensor.cpp
index 88128a6db..f99956925 100644
--- a/src/modules/Telemetry/Sensor/MAX30102Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/MAX30102Sensor.cpp
@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY && !defined(ARCH_PORTDUINO)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "MAX30102Sensor.h"
@@ -80,4 +80,4 @@ bool MAX30102Sensor::getMetrics(meshtastic_Telemetry *measurement)
     return true;
 }
 
-#endif
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/MAX30102Sensor.h b/src/modules/Telemetry/Sensor/MAX30102Sensor.h
index 426d9d365..026e30ed0 100644
--- a/src/modules/Telemetry/Sensor/MAX30102Sensor.h
+++ b/src/modules/Telemetry/Sensor/MAX30102Sensor.h
@@ -1,6 +1,6 @@
 #include "configuration.h"
 
-#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
+#if !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !MESHTASTIC_EXCLUDE_HEALTH_TELEMETRY && !defined(ARCH_PORTDUINO)
 
 #include "../mesh/generated/meshtastic/telemetry.pb.h"
 #include "TelemetrySensor.h"
@@ -23,4 +23,4 @@ class MAX30102Sensor : public TelemetrySensor
     virtual bool getMetrics(meshtastic_Telemetry *measurement) override;
 };
 
-#endif
+#endif
\ No newline at end of file
diff --git a/src/modules/Telemetry/Sensor/MCP9808Sensor.cpp b/src/modules/Telemetry/Sensor/MCP9808Sensor.cpp
index 627107625..58ce29cd2 100644
--- a/src/modules/Telemetry/Sensor/MCP9808Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/MCP9808Sensor.cpp
@@ -28,7 +28,7 @@ bool MCP9808Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
     measurement->variant.environment_metrics.has_temperature = true;
 
-    LOG_DEBUG("MCP9808Sensor::getMetrics");
+    LOG_DEBUG("MCP9808 getMetrics");
     measurement->variant.environment_metrics.temperature = mcp9808.readTempC();
     return true;
 }
diff --git a/src/modules/Telemetry/Sensor/MLX90614Sensor.cpp b/src/modules/Telemetry/Sensor/MLX90614Sensor.cpp
index 3a13eeba4..d9908fce3 100644
--- a/src/modules/Telemetry/Sensor/MLX90614Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/MLX90614Sensor.cpp
@@ -19,7 +19,7 @@ int32_t MLX90614Sensor::runOnce()
         LOG_DEBUG("MLX90614 emissivity: %f", mlx.readEmissivity());
         if (fabs(MLX90614_EMISSIVITY - mlx.readEmissivity()) > 0.001) {
             mlx.writeEmissivity(MLX90614_EMISSIVITY);
-            LOG_INFO("MLX90614 emissivity updated. In case of weird data, power cycle.");
+            LOG_INFO("MLX90614 emissivity updated. In case of weird data, power cycle");
         }
         LOG_DEBUG("MLX90614 Init Succeed");
         status = true;
diff --git a/src/modules/Telemetry/Sensor/NAU7802Sensor.cpp b/src/modules/Telemetry/Sensor/NAU7802Sensor.cpp
index 856a1aeec..65f616686 100644
--- a/src/modules/Telemetry/Sensor/NAU7802Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/NAU7802Sensor.cpp
@@ -35,7 +35,7 @@ void NAU7802Sensor::setup() {}
 
 bool NAU7802Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
-    LOG_DEBUG("NAU7802Sensor::getMetrics");
+    LOG_DEBUG("NAU7802 getMetrics");
     nau7802.powerUp();
     // Wait for the sensor to become ready for one second max
     uint32_t start = millis();
@@ -103,7 +103,7 @@ bool NAU7802Sensor::saveCalibrationData()
     nau7802config.calibrationFactor = nau7802.getCalibrationFactor();
     bool okay = false;
 
-    LOG_INFO("%s state write to %s.", sensorName, nau7802ConfigFileName);
+    LOG_INFO("%s state write to %s", sensorName, nau7802ConfigFileName);
     pb_ostream_t stream = {&writecb, static_cast(&file), meshtastic_Nau7802Config_size};
 
     if (!pb_encode(&stream, &meshtastic_Nau7802Config_msg, &nau7802config)) {
@@ -121,7 +121,7 @@ bool NAU7802Sensor::loadCalibrationData()
     auto file = FSCom.open(nau7802ConfigFileName, FILE_O_READ);
     bool okay = false;
     if (file) {
-        LOG_INFO("%s state read from %s.", sensorName, nau7802ConfigFileName);
+        LOG_INFO("%s state read from %s", sensorName, nau7802ConfigFileName);
         pb_istream_t stream = {&readcb, &file, meshtastic_Nau7802Config_size};
         if (!pb_decode(&stream, &meshtastic_Nau7802Config_msg, &nau7802config)) {
             LOG_ERROR("Error: can't decode protobuf %s", PB_GET_ERROR(&stream));
@@ -132,9 +132,9 @@ bool NAU7802Sensor::loadCalibrationData()
         }
         file.close();
     } else {
-        LOG_INFO("No %s state found (File: %s).", sensorName, nau7802ConfigFileName);
+        LOG_INFO("No %s state found (File: %s)", sensorName, nau7802ConfigFileName);
     }
     return okay;
 }
 
-#endif
\ No newline at end of file
+#endif
diff --git a/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp b/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp
index c7421d279..e352dda8d 100644
--- a/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp
+++ b/src/modules/Telemetry/Sensor/RCWL9620Sensor.cpp
@@ -24,7 +24,7 @@ void RCWL9620Sensor::setup() {}
 bool RCWL9620Sensor::getMetrics(meshtastic_Telemetry *measurement)
 {
     measurement->variant.environment_metrics.has_distance = true;
-    LOG_DEBUG("RCWL9620Sensor::getMetrics");
+    LOG_DEBUG("RCWL9620 getMetrics");
     measurement->variant.environment_metrics.distance = getDistance();
     return true;
 }
diff --git a/src/modules/Telemetry/Sensor/TelemetrySensor.h b/src/modules/Telemetry/Sensor/TelemetrySensor.h
index 7910568c9..08cc1125d 100644
--- a/src/modules/Telemetry/Sensor/TelemetrySensor.h
+++ b/src/modules/Telemetry/Sensor/TelemetrySensor.h
@@ -31,7 +31,7 @@ class TelemetrySensor
     int32_t initI2CSensor()
     {
         if (!status) {
-            LOG_WARN("Could not connect to detected %s sensor. Removing from nodeTelemetrySensorsMap.", sensorName);
+            LOG_WARN("Can't connect to detected %s sensor. Remove from nodeTelemetrySensorsMap", sensorName);
             nodeTelemetrySensorsMap[sensorType].first = 0;
         } else {
             LOG_INFO("Opened %s sensor on i2c bus", sensorName);
diff --git a/src/modules/Telemetry/UnitConversions.cpp b/src/modules/Telemetry/UnitConversions.cpp
index 9f40de40f..fff1ee3d2 100644
--- a/src/modules/Telemetry/UnitConversions.cpp
+++ b/src/modules/Telemetry/UnitConversions.cpp
@@ -1,8 +1,8 @@
 #include "UnitConversions.h"
 
-float UnitConversions::CelsiusToFahrenheit(float celcius)
+float UnitConversions::CelsiusToFahrenheit(float celsius)
 {
-    return (celcius * 9) / 5 + 32;
+    return (celsius * 9) / 5 + 32;
 }
 
 float UnitConversions::MetersPerSecondToKnots(float metersPerSecond)
diff --git a/src/modules/Telemetry/UnitConversions.h b/src/modules/Telemetry/UnitConversions.h
index 60f9b664a..638476315 100644
--- a/src/modules/Telemetry/UnitConversions.h
+++ b/src/modules/Telemetry/UnitConversions.h
@@ -3,7 +3,7 @@
 class UnitConversions
 {
   public:
-    static float CelsiusToFahrenheit(float celcius);
+    static float CelsiusToFahrenheit(float celsius);
     static float MetersPerSecondToKnots(float metersPerSecond);
     static float MetersPerSecondToMilesPerHour(float metersPerSecond);
     static float HectoPascalToInchesOfMercury(float hectoPascal);
diff --git a/src/modules/WaypointModule.cpp b/src/modules/WaypointModule.cpp
index 48e0c4242..b8b738309 100644
--- a/src/modules/WaypointModule.cpp
+++ b/src/modules/WaypointModule.cpp
@@ -126,7 +126,7 @@ void WaypointModule::drawFrame(OLEDDisplay *display, OLEDDisplayUiState *state,
     }
 
     // If our node has a position:
-    if (ourNode && (hasValidPosition(ourNode) || screen->hasHeading())) {
+    if (ourNode && (nodeDB->hasValidPosition(ourNode) || screen->hasHeading())) {
         const meshtastic_PositionLite &op = ourNode->position;
         float myHeading;
         if (screen->hasHeading())
diff --git a/src/modules/esp32/AudioModule.cpp b/src/modules/esp32/AudioModule.cpp
index ec0ddabfb..77cc94359 100644
--- a/src/modules/esp32/AudioModule.cpp
+++ b/src/modules/esp32/AudioModule.cpp
@@ -46,7 +46,7 @@ void run_codec2(void *parameter)
     // 4 bytes of header in each frame hex c0 de c2 plus the bitrate
     memcpy(audioModule->tx_encode_frame, &audioModule->tx_header, sizeof(audioModule->tx_header));
 
-    LOG_INFO("Starting codec2 task");
+    LOG_INFO("Start codec2 task");
 
     while (true) {
         uint32_t tcount = ulTaskNotifyTake(pdFALSE, pdMS_TO_TICKS(10000));
@@ -61,7 +61,7 @@ void run_codec2(void *parameter)
                 audioModule->tx_encode_frame_index += audioModule->encode_codec_size;
 
                 if (audioModule->tx_encode_frame_index == (audioModule->encode_frame_size + sizeof(audioModule->tx_header))) {
-                    LOG_INFO("Sending %d codec2 bytes", audioModule->encode_frame_size);
+                    LOG_INFO("Send %d codec2 bytes", audioModule->encode_frame_size);
                     audioModule->sendPayload();
                     audioModule->tx_encode_frame_index = sizeof(audioModule->tx_header);
                 }
@@ -91,7 +91,7 @@ void run_codec2(void *parameter)
     }
 }
 
-AudioModule::AudioModule() : SinglePortModule("AudioModule", meshtastic_PortNum_AUDIO_APP), concurrency::OSThread("AudioModule")
+AudioModule::AudioModule() : SinglePortModule("Audio", meshtastic_PortNum_AUDIO_APP), concurrency::OSThread("Audio")
 {
     // moduleConfig.audio.codec2_enabled = true;
     // moduleConfig.audio.i2s_ws = 13;
@@ -101,8 +101,7 @@ AudioModule::AudioModule() : SinglePortModule("AudioModule", meshtastic_PortNum_
     // moduleConfig.audio.ptt_pin = 39;
 
     if ((moduleConfig.audio.codec2_enabled) && (myRegion->audioPermitted)) {
-        LOG_INFO("Setting up codec2 in mode %u",
-                 (moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1);
+        LOG_INFO("Set up codec2 in mode %u", (moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1);
         codec2 = codec2_create((moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1);
         memcpy(tx_header.magic, c2_magic, sizeof(c2_magic));
         tx_header.mode = (moduleConfig.audio.bitrate ? moduleConfig.audio.bitrate : AUDIO_MODULE_MODE) - 1;
@@ -111,7 +110,7 @@ AudioModule::AudioModule() : SinglePortModule("AudioModule", meshtastic_PortNum_
         encode_frame_num = (meshtastic_Constants_DATA_PAYLOAD_LEN - sizeof(tx_header)) / encode_codec_size;
         encode_frame_size = encode_frame_num * encode_codec_size; // max 233 bytes + 4 header bytes
         adc_buffer_size = codec2_samples_per_frame(codec2);
-        LOG_INFO("using %d frames of %d bytes for a total payload length of %d bytes", encode_frame_num, encode_codec_size,
+        LOG_INFO("Use %d frames of %d bytes for a total payload length of %d bytes", encode_frame_num, encode_codec_size,
                  encode_frame_size);
         xTaskCreate(&run_codec2, "codec2_task", 30000, NULL, 5, &codec2HandlerTask);
     } else {
@@ -148,7 +147,7 @@ int32_t AudioModule::runOnce()
         esp_err_t res;
         if (firstTime) {
             // Set up I2S Processor configuration. This will produce 16bit samples at 8 kHz instead of 12 from the ADC
-            LOG_INFO("Initializing I2S SD: %d DIN: %d WS: %d SCK: %d", moduleConfig.audio.i2s_sd, moduleConfig.audio.i2s_din,
+            LOG_INFO("Init I2S SD: %d DIN: %d WS: %d SCK: %d", moduleConfig.audio.i2s_sd, moduleConfig.audio.i2s_din,
                      moduleConfig.audio.i2s_ws, moduleConfig.audio.i2s_sck);
             i2s_config_t i2s_config = {.mode = (i2s_mode_t)(I2S_MODE_MASTER | (moduleConfig.audio.i2s_sd ? I2S_MODE_RX : 0) |
                                                             (moduleConfig.audio.i2s_din ? I2S_MODE_TX : 0)),
@@ -185,7 +184,7 @@ int32_t AudioModule::runOnce()
             radio_state = RadioState::rx;
 
             // Configure PTT input
-            LOG_INFO("Initializing PTT on Pin %u", moduleConfig.audio.ptt_pin ? moduleConfig.audio.ptt_pin : PTT_PIN);
+            LOG_INFO("Init PTT on Pin %u", moduleConfig.audio.ptt_pin ? moduleConfig.audio.ptt_pin : PTT_PIN);
             pinMode(moduleConfig.audio.ptt_pin ? moduleConfig.audio.ptt_pin : PTT_PIN, INPUT);
 
             firstTime = false;
@@ -204,7 +203,7 @@ int32_t AudioModule::runOnce()
                     LOG_INFO("PTT released, switching to RX");
                     if (tx_encode_frame_index > sizeof(tx_header)) {
                         // Send the incomplete frame
-                        LOG_INFO("Sending %d codec2 bytes (incomplete)", tx_encode_frame_index);
+                        LOG_INFO("Send %d codec2 bytes (incomplete)", tx_encode_frame_index);
                         sendPayload();
                     }
                     tx_encode_frame_index = sizeof(tx_header);
diff --git a/src/modules/esp32/PaxcounterModule.cpp b/src/modules/esp32/PaxcounterModule.cpp
index 3a0f14ce9..b27586771 100644
--- a/src/modules/esp32/PaxcounterModule.cpp
+++ b/src/modules/esp32/PaxcounterModule.cpp
@@ -22,7 +22,7 @@ void PaxcounterModule::handlePaxCounterReportRequest()
 }
 
 PaxcounterModule::PaxcounterModule()
-    : concurrency::OSThread("PaxcounterModule"),
+    : concurrency::OSThread("Paxcounter"),
       ProtobufModule("paxcounter", meshtastic_PortNum_PAXCOUNTER_APP, &meshtastic_Paxcount_msg)
 {
 }
@@ -39,7 +39,7 @@ bool PaxcounterModule::sendInfo(NodeNum dest)
     if (paxcounterModule->reportedDataSent)
         return false;
 
-    LOG_INFO("PaxcounterModule: sending pax info wifi=%d; ble=%d; uptime=%lu", count_from_libpax.wifi_count,
+    LOG_INFO("PaxcounterModule: send pax info wifi=%d; ble=%d; uptime=%lu", count_from_libpax.wifi_count,
              count_from_libpax.ble_count, millis() / 1000);
 
     meshtastic_Paxcount pl = meshtastic_Paxcount_init_default;
@@ -95,7 +95,9 @@ int32_t PaxcounterModule::runOnce()
 
             // internal processing initialization
             libpax_counter_init(handlePaxCounterReportRequest, &count_from_libpax,
-                                moduleConfig.paxcounter.paxcounter_update_interval, 0);
+                                Default::getConfiguredOrDefault(moduleConfig.paxcounter.paxcounter_update_interval,
+                                                                default_telemetry_broadcast_interval_secs),
+                                0);
             libpax_counter_start();
         } else {
             sendInfo(NODENUM_BROADCAST);
diff --git a/src/motion/AccelerometerThread.h b/src/motion/AccelerometerThread.h
index b9ae926cf..95f09910f 100755
--- a/src/motion/AccelerometerThread.h
+++ b/src/motion/AccelerometerThread.h
@@ -7,14 +7,21 @@
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
 #include "../concurrency/OSThread.h"
+#ifdef HAS_BMA423
 #include "BMA423Sensor.h"
+#endif
 #include "BMX160Sensor.h"
 #include "ICM20948Sensor.h"
 #include "LIS3DHSensor.h"
 #include "LSM6DS3Sensor.h"
 #include "MPU6050Sensor.h"
 #include "MotionSensor.h"
+#ifdef HAS_QMA6100P
+#include "QMA6100PSensor.h"
+#endif
+#ifdef HAS_STK8XXX
 #include "STK8XXXSensor.h"
+#endif
 
 extern ScanI2C::DeviceAddress accelerometer_found;
 
@@ -25,7 +32,7 @@ class AccelerometerThread : public concurrency::OSThread
     bool isInitialised = false;
 
   public:
-    explicit AccelerometerThread(ScanI2C::FoundDevice foundDevice) : OSThread("AccelerometerThread")
+    explicit AccelerometerThread(ScanI2C::FoundDevice foundDevice) : OSThread("Accelerometer")
     {
         device = foundDevice;
         init();
@@ -62,23 +69,25 @@ class AccelerometerThread : public concurrency::OSThread
             return;
 
         if (device.address.port == ScanI2C::I2CPort::NO_I2C || device.address.address == 0 || device.type == ScanI2C::NONE) {
-            LOG_DEBUG("AccelerometerThread disabling due to no sensors found");
+            LOG_DEBUG("AccelerometerThread Disable due to no sensors found");
             disable();
             return;
         }
 
 #ifndef RAK_4631
         if (!config.display.wake_on_tap_or_motion && !config.device.double_tap_as_button_press) {
-            LOG_DEBUG("AccelerometerThread disabling due to no interested configurations");
+            LOG_DEBUG("AccelerometerThread Disable due to no interested configurations");
             disable();
             return;
         }
 #endif
 
         switch (device.type) {
+#ifdef HAS_BMA423
         case ScanI2C::DeviceType::BMA423:
             sensor = new BMA423Sensor(device);
             break;
+#endif
         case ScanI2C::DeviceType::MPU6050:
             sensor = new MPU6050Sensor(device);
             break;
@@ -91,12 +100,19 @@ class AccelerometerThread : public concurrency::OSThread
         case ScanI2C::DeviceType::LSM6DS3:
             sensor = new LSM6DS3Sensor(device);
             break;
+#ifdef HAS_STK8XXX
         case ScanI2C::DeviceType::STK8BAXX:
             sensor = new STK8XXXSensor(device);
             break;
+#endif
         case ScanI2C::DeviceType::ICM20948:
             sensor = new ICM20948Sensor(device);
             break;
+#ifdef HAS_QMA6100P
+        case ScanI2C::DeviceType::QMA6100P:
+            sensor = new QMA6100PSensor(device);
+            break;
+#endif
         default:
             disable();
             return;
@@ -110,7 +126,7 @@ class AccelerometerThread : public concurrency::OSThread
     }
 
     // Copy constructor (not implemented / included to avoid cppcheck warnings)
-    AccelerometerThread(const AccelerometerThread &other) : OSThread::OSThread("AccelerometerThread") { this->copy(other); }
+    AccelerometerThread(const AccelerometerThread &other) : OSThread::OSThread("Accelerometer") { this->copy(other); }
 
     // Destructor (included to avoid cppcheck warnings)
     virtual ~AccelerometerThread() { clean(); }
diff --git a/src/motion/BMA423Sensor.cpp b/src/motion/BMA423Sensor.cpp
index ec88a9430..d7058bab0 100755
--- a/src/motion/BMA423Sensor.cpp
+++ b/src/motion/BMA423Sensor.cpp
@@ -1,6 +1,6 @@
 #include "BMA423Sensor.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_BMA423)
 
 using namespace MotionSensorI2C;
 
@@ -41,10 +41,10 @@ bool BMA423Sensor::init()
 
         // It corresponds to isDoubleClick interrupt
         sensor.enableWakeupIRQ();
-        LOG_DEBUG("BMA423Sensor::init ok");
+        LOG_DEBUG("BMA423 init ok");
         return true;
     }
-    LOG_DEBUG("BMA423Sensor::init failed");
+    LOG_DEBUG("BMA423 init failed");
     return false;
 }
 
diff --git a/src/motion/BMA423Sensor.h b/src/motion/BMA423Sensor.h
index 0bc0ddf8c..455315aa9 100755
--- a/src/motion/BMA423Sensor.h
+++ b/src/motion/BMA423Sensor.h
@@ -4,7 +4,7 @@
 
 #include "MotionSensor.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_BMA423)
 
 #include 
 #include 
diff --git a/src/motion/BMX160Sensor.cpp b/src/motion/BMX160Sensor.cpp
index f9e82e87d..6562a651c 100755
--- a/src/motion/BMX160Sensor.cpp
+++ b/src/motion/BMX160Sensor.cpp
@@ -16,10 +16,10 @@ bool BMX160Sensor::init()
     if (sensor.begin()) {
         // set output data rate
         sensor.ODR_Config(BMX160_ACCEL_ODR_100HZ, BMX160_GYRO_ODR_100HZ);
-        LOG_DEBUG("BMX160Sensor::init ok");
+        LOG_DEBUG("BMX160 init ok");
         return true;
     }
-    LOG_DEBUG("BMX160Sensor::init failed");
+    LOG_DEBUG("BMX160 init failed");
     return false;
 }
 
diff --git a/src/motion/ICM20948Sensor.cpp b/src/motion/ICM20948Sensor.cpp
index d1272e8e5..338a4fc5f 100755
--- a/src/motion/ICM20948Sensor.cpp
+++ b/src/motion/ICM20948Sensor.cpp
@@ -44,14 +44,14 @@ int32_t ICM20948Sensor::runOnce()
     // Wake on motion using polling  - this is not as efficient as using hardware interrupt pin (see above)
     auto status = sensor->setBank(0);
     if (sensor->status != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::isWakeOnMotion failed to set bank - %s", sensor->statusString());
+        LOG_DEBUG("ICM20948 isWakeOnMotion failed to set bank - %s", sensor->statusString());
         return MOTION_SENSOR_CHECK_INTERVAL_MS;
     }
 
     ICM_20948_INT_STATUS_t int_stat;
     status = sensor->read(AGB0_REG_INT_STATUS, (uint8_t *)&int_stat, sizeof(ICM_20948_INT_STATUS_t));
     if (status != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::isWakeOnMotion failed to read interrupts - %s", sensor->statusString());
+        LOG_DEBUG("ICM20948 isWakeOnMotion failed to read interrupts - %s", sensor->statusString());
         return MOTION_SENSOR_CHECK_INTERVAL_MS;
     }
 
@@ -99,25 +99,25 @@ bool ICM20948Singleton::init(ScanI2C::FoundDevice device)
     ICM_20948_Status_e status = begin(Wire, device.address.address == ICM20948_ADDR ? 1 : 0);
 #endif
     if (status != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::init begin - %s", statusString());
+        LOG_DEBUG("ICM20948 init begin - %s", statusString());
         return false;
     }
 
     // SW reset to make sure the device starts in a known state
     if (swReset() != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::init reset - %s", statusString());
+        LOG_DEBUG("ICM20948 init reset - %s", statusString());
         return false;
     }
     delay(200);
 
     // Now wake the sensor up
     if (sleep(false) != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::init wake - %s", statusString());
+        LOG_DEBUG("ICM20948 init wake - %s", statusString());
         return false;
     }
 
     if (lowPower(false) != ICM_20948_Stat_Ok) {
-        LOG_DEBUG("ICM20948Sensor::init high power - %s", statusString());
+        LOG_DEBUG("ICM20948 init high power - %s", statusString());
         return false;
     }
 
@@ -125,19 +125,19 @@ bool ICM20948Singleton::init(ScanI2C::FoundDevice device)
 
     // Active low
     cfgIntActiveLow(true);
-    LOG_DEBUG("ICM20948Sensor::init set cfgIntActiveLow - %s", statusString());
+    LOG_DEBUG("ICM20948 init set cfgIntActiveLow - %s", statusString());
 
     // Push-pull
     cfgIntOpenDrain(false);
-    LOG_DEBUG("ICM20948Sensor::init set cfgIntOpenDrain - %s", statusString());
+    LOG_DEBUG("ICM20948 init set cfgIntOpenDrain - %s", statusString());
 
     // If enabled, *ANY* read will clear the INT_STATUS register.
     cfgIntAnyReadToClear(true);
-    LOG_DEBUG("ICM20948Sensor::init set cfgIntAnyReadToClear - %s", statusString());
+    LOG_DEBUG("ICM20948 init set cfgIntAnyReadToClear - %s", statusString());
 
     // Latch the interrupt until cleared
     cfgIntLatch(true);
-    LOG_DEBUG("ICM20948Sensor::init set cfgIntLatch - %s", statusString());
+    LOG_DEBUG("ICM20948 init set cfgIntLatch - %s", statusString());
 
     // Set up an interrupt pin with an internal pullup for active low
     pinMode(ICM_20948_INT_PIN, INPUT_PULLUP);
@@ -168,13 +168,13 @@ bool ICM20948Singleton::setWakeOnMotion()
 
     // Enable WoM Logic mode 1 = Compare the current sample with the previous sample
     status = WOMLogic(true, 1);
-    LOG_DEBUG("ICM20948Sensor::init set WOMLogic - %s", statusString());
+    LOG_DEBUG("ICM20948 init set WOMLogic - %s", statusString());
     if (status != ICM_20948_Stat_Ok)
         return false;
 
     // Enable interrupts on WakeOnMotion
     status = intEnableWOM(true);
-    LOG_DEBUG("ICM20948Sensor::init set intEnableWOM - %s", statusString());
+    LOG_DEBUG("ICM20948 init set intEnableWOM - %s", statusString());
     return status == ICM_20948_Stat_Ok;
 
     // Clear any current interrupts
diff --git a/src/motion/LIS3DHSensor.cpp b/src/motion/LIS3DHSensor.cpp
index 0d608670c..995f74abe 100755
--- a/src/motion/LIS3DHSensor.cpp
+++ b/src/motion/LIS3DHSensor.cpp
@@ -1,4 +1,5 @@
 #include "LIS3DHSensor.h"
+#include "NodeDB.h"
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
@@ -10,10 +11,10 @@ bool LIS3DHSensor::init()
         sensor.setRange(LIS3DH_RANGE_2_G);
         // Adjust threshold, higher numbers are less sensitive
         sensor.setClick(config.device.double_tap_as_button_press ? 2 : 1, MOTION_SENSOR_CHECK_INTERVAL_MS);
-        LOG_DEBUG("LIS3DHSensor::init ok");
+        LOG_DEBUG("LIS3DH init ok");
         return true;
     }
-    LOG_DEBUG("LIS3DHSensor::init failed");
+    LOG_DEBUG("LIS3DH init failed");
     return false;
 }
 
@@ -21,7 +22,7 @@ int32_t LIS3DHSensor::runOnce()
 {
     if (sensor.getClick() > 0) {
         uint8_t click = sensor.getClick();
-        if (!config.device.double_tap_as_button_press) {
+        if (!config.device.double_tap_as_button_press && config.display.wake_on_tap_or_motion) {
             wakeScreen();
         }
 
@@ -33,4 +34,4 @@ int32_t LIS3DHSensor::runOnce()
     return MOTION_SENSOR_CHECK_INTERVAL_MS;
 }
 
-#endif
\ No newline at end of file
+#endif
diff --git a/src/motion/LSM6DS3Sensor.cpp b/src/motion/LSM6DS3Sensor.cpp
index b3b1a13ec..2dcb4d663 100755
--- a/src/motion/LSM6DS3Sensor.cpp
+++ b/src/motion/LSM6DS3Sensor.cpp
@@ -1,4 +1,5 @@
 #include "LSM6DS3Sensor.h"
+#include "NodeDB.h"
 
 #if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
 
@@ -11,13 +12,13 @@ bool LSM6DS3Sensor::init()
         // Default threshold of 2G, less sensitive options are 4, 8 or 16G
         sensor.setAccelRange(LSM6DS_ACCEL_RANGE_2_G);
 
-        // Duration is number of occurances needed to trigger, higher threshold is less sensitive
+        // Duration is number of occurrences needed to trigger, higher threshold is less sensitive
         sensor.enableWakeup(config.display.wake_on_tap_or_motion, 1, LSM6DS3_WAKE_THRESH);
 
-        LOG_DEBUG("LSM6DS3Sensor::init ok");
+        LOG_DEBUG("LSM6DS3 init ok");
         return true;
     }
-    LOG_DEBUG("LSM6DS3Sensor::init failed");
+    LOG_DEBUG("LSM6DS3 init failed");
     return false;
 }
 
diff --git a/src/motion/MPU6050Sensor.cpp b/src/motion/MPU6050Sensor.cpp
index b5048090a..c3f2d0b7c 100755
--- a/src/motion/MPU6050Sensor.cpp
+++ b/src/motion/MPU6050Sensor.cpp
@@ -13,10 +13,10 @@ bool MPU6050Sensor::init()
         sensor.setMotionDetectionDuration(20);
         sensor.setInterruptPinLatch(true); // Keep it latched.  Will turn off when reinitialized.
         sensor.setInterruptPinPolarity(true);
-        LOG_DEBUG("MPU6050Sensor::init ok");
+        LOG_DEBUG("MPU6050 init ok");
         return true;
     }
-    LOG_DEBUG("MPU6050Sensor::init failed");
+    LOG_DEBUG("MPU6050 init failed");
     return false;
 }
 
diff --git a/src/motion/MotionSensor.cpp b/src/motion/MotionSensor.cpp
index 95bf64640..242e3709f 100755
--- a/src/motion/MotionSensor.cpp
+++ b/src/motion/MotionSensor.cpp
@@ -10,8 +10,8 @@ MotionSensor::MotionSensor(ScanI2C::FoundDevice foundDevice)
     device.address.address = foundDevice.address.address;
     device.address.port = foundDevice.address.port;
     device.type = foundDevice.type;
-    LOG_DEBUG("MotionSensor::MotionSensor port: %s address: 0x%x type: %d",
-              devicePort() == ScanI2C::I2CPort::WIRE1 ? "Wire1" : "Wire", (uint8_t)deviceAddress(), deviceType());
+    LOG_DEBUG("Motion MotionSensor port: %s address: 0x%x type: %d", devicePort() == ScanI2C::I2CPort::WIRE1 ? "Wire1" : "Wire",
+              (uint8_t)deviceAddress(), deviceType());
 }
 
 ScanI2C::DeviceType MotionSensor::deviceType()
@@ -57,14 +57,14 @@ void MotionSensor::drawFrameCalibration(OLEDDisplay *display, OLEDDisplayUiState
 void MotionSensor::wakeScreen()
 {
     if (powerFSM.getState() == &stateDARK) {
-        LOG_DEBUG("MotionSensor::wakeScreen detected");
+        LOG_DEBUG("Motion wakeScreen detected");
         powerFSM.trigger(EVENT_INPUT);
     }
 }
 
 void MotionSensor::buttonPress()
 {
-    LOG_DEBUG("MotionSensor::buttonPress detected");
+    LOG_DEBUG("Motion buttonPress detected");
     powerFSM.trigger(EVENT_PRESS);
 }
 
diff --git a/src/motion/MotionSensor.h b/src/motion/MotionSensor.h
index 4da23cc70..78eec54ce 100755
--- a/src/motion/MotionSensor.h
+++ b/src/motion/MotionSensor.h
@@ -14,6 +14,7 @@
 #include "../graphics/Screen.h"
 #include "../graphics/ScreenFonts.h"
 #include "../power.h"
+#include "Wire.h"
 
 // Base class for motion processing
 class MotionSensor
diff --git a/src/motion/QMA6100PSensor.cpp b/src/motion/QMA6100PSensor.cpp
new file mode 100644
index 000000000..eb81e16c7
--- /dev/null
+++ b/src/motion/QMA6100PSensor.cpp
@@ -0,0 +1,183 @@
+#include "QMA6100PSensor.h"
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_QMA6100P)
+
+// Flag when an interrupt has been detected
+volatile static bool QMA6100P_IRQ = false;
+
+// Interrupt service routine
+void QMA6100PSetInterrupt()
+{
+    QMA6100P_IRQ = true;
+}
+
+QMA6100PSensor::QMA6100PSensor(ScanI2C::FoundDevice foundDevice) : MotionSensor::MotionSensor(foundDevice) {}
+
+bool QMA6100PSensor::init()
+{
+    // Initialise the sensor
+    sensor = QMA6100PSingleton::GetInstance();
+    if (!sensor->init(device))
+        return false;
+
+    // Enable simple Wake on Motion
+    return sensor->setWakeOnMotion();
+}
+
+#ifdef QMA_6100P_INT_PIN
+
+int32_t QMA6100PSensor::runOnce()
+{
+    // Wake on motion using hardware interrupts - this is the most efficient way to check for motion
+    if (QMA6100P_IRQ) {
+        QMA6100P_IRQ = false;
+        wakeScreen();
+    }
+    return MOTION_SENSOR_CHECK_INTERVAL_MS;
+}
+
+#else
+
+int32_t QMA6100PSensor::runOnce()
+{
+    // Wake on motion using polling  - this is not as efficient as using hardware interrupt pin (see above)
+
+    uint8_t tempVal;
+    if (!sensor->readRegisterRegion(SFE_QMA6100P_INT_ST0, &tempVal, 1)) {
+        LOG_DEBUG("QMA6100PS isWakeOnMotion failed to read interrupts");
+        return MOTION_SENSOR_CHECK_INTERVAL_MS;
+    }
+
+    if ((tempVal & 7) != 0) {
+        // Wake up!
+        wakeScreen();
+    }
+    return MOTION_SENSOR_CHECK_INTERVAL_MS;
+}
+
+#endif
+
+// ----------------------------------------------------------------------
+// QMA6100PSingleton
+// ----------------------------------------------------------------------
+
+// Get a singleton wrapper for an Sparkfun QMA_6100P_I2C
+QMA6100PSingleton *QMA6100PSingleton::GetInstance()
+{
+    if (pinstance == nullptr) {
+        pinstance = new QMA6100PSingleton();
+    }
+    return pinstance;
+}
+
+QMA6100PSingleton::QMA6100PSingleton() {}
+
+QMA6100PSingleton::~QMA6100PSingleton() {}
+
+QMA6100PSingleton *QMA6100PSingleton::pinstance{nullptr};
+
+// Initialise the QMA6100P Sensor
+bool QMA6100PSingleton::init(ScanI2C::FoundDevice device)
+{
+
+// startup
+#ifdef Wire1
+    bool status = begin(device.address.address, device.address.port == ScanI2C::I2CPort::WIRE1 ? &Wire1 : &Wire);
+#else
+    // check chip id
+    bool status = begin(device.address.address, &Wire);
+#endif
+    if (status != true) {
+        LOG_WARN("QMA6100P init begin failed");
+        return false;
+    }
+    delay(20);
+    // SW reset to make sure the device starts in a known state
+    if (softwareReset() != true) {
+        LOG_WARN("QMA6100P init reset failed");
+        return false;
+    }
+    delay(20);
+    // Set range
+    if (!setRange(QMA_6100P_MPU_ACCEL_SCALE)) {
+        LOG_WARN("QMA6100P init range failed");
+        return false;
+    }
+    // set active mode
+    if (!enableAccel()) {
+        LOG_WARN("ERROR QMA6100P active mode set failed");
+    }
+    // set calibrateoffsets
+    if (!calibrateOffsets()) {
+        LOG_WARN("ERROR QMA6100P calibration failed");
+    }
+#ifdef QMA_6100P_INT_PIN
+
+    // Active low & Open Drain
+    uint8_t tempVal;
+    if (!readRegisterRegion(SFE_QMA6100P_INTPINT_CONF, &tempVal, 1)) {
+        LOG_WARN("QMA6100P init failed to read interrupt pin config");
+        return false;
+    }
+
+    tempVal |= 0b00000010; // Active low & Open Drain
+
+    if (!writeRegisterByte(SFE_QMA6100P_INTPINT_CONF, tempVal)) {
+        LOG_WARN("QMA6100P init failed to write interrupt pin config");
+        return false;
+    }
+
+    // Latch until cleared, all reads clear the latch
+    if (!readRegisterRegion(SFE_QMA6100P_INT_CFG, &tempVal, 1)) {
+        LOG_WARN("QMA6100P init failed to read interrupt config");
+        return false;
+    }
+
+    tempVal |= 0b10000001; // Latch until cleared, INT_RD_CLR1
+
+    if (!writeRegisterByte(SFE_QMA6100P_INT_CFG, tempVal)) {
+        LOG_WARN("QMA6100P init failed to write interrupt config");
+        return false;
+    }
+    // Set up an interrupt pin with an internal pullup for active low
+    pinMode(QMA_6100P_INT_PIN, INPUT_PULLUP);
+
+    // Set up an interrupt service routine
+    attachInterrupt(QMA_6100P_INT_PIN, QMA6100PSetInterrupt, FALLING);
+
+#endif
+    return true;
+}
+
+bool QMA6100PSingleton::setWakeOnMotion()
+{
+    // Enable 'Any Motion' interrupt
+    if (!writeRegisterByte(SFE_QMA6100P_INT_EN2, 0b00000111)) {
+        LOG_WARN("QMA6100P :setWakeOnMotion failed to write interrupt enable");
+        return false;
+    }
+
+    // Set 'Significant Motion' interrupt map to INT1
+    uint8_t tempVal;
+
+    if (!readRegisterRegion(SFE_QMA6100P_INT_MAP1, &tempVal, 1)) {
+        LOG_WARN("QMA6100P setWakeOnMotion failed to read interrupt map");
+        return false;
+    }
+
+    sfe_qma6100p_int_map1_bitfield_t int_map1;
+    int_map1.all = tempVal;
+    int_map1.bits.int1_any_mot = 1; // any motion interrupt to INT1
+    tempVal = int_map1.all;
+
+    if (!writeRegisterByte(SFE_QMA6100P_INT_MAP1, tempVal)) {
+        LOG_WARN("QMA6100P setWakeOnMotion failed to write interrupt map");
+        return false;
+    }
+
+    // Clear any current interrupts
+    QMA6100P_IRQ = false;
+    return true;
+}
+
+#endif
diff --git a/src/motion/QMA6100PSensor.h b/src/motion/QMA6100PSensor.h
new file mode 100644
index 000000000..7ba00149c
--- /dev/null
+++ b/src/motion/QMA6100PSensor.h
@@ -0,0 +1,63 @@
+#pragma once
+#ifndef _QMA_6100P_SENSOR_H_
+#define _QMA_6100P_SENSOR_H_
+
+#include "MotionSensor.h"
+
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_QMA6100P)
+
+#include 
+
+// Set the default accelerometer scale - gpm2, gpm4, gpm8, gpm16
+#ifndef QMA_6100P_MPU_ACCEL_SCALE
+#define QMA_6100P_MPU_ACCEL_SCALE SFE_QMA6100P_RANGE32G
+#endif
+
+// The I2C address of the Accelerometer (if found) from main.cpp
+extern ScanI2C::DeviceAddress accelerometer_found;
+
+// Singleton wrapper for the Sparkfun QMA_6100P_I2C class
+class QMA6100PSingleton : public QMA6100P
+{
+  private:
+    static QMA6100PSingleton *pinstance;
+
+  protected:
+    QMA6100PSingleton();
+    ~QMA6100PSingleton();
+
+  public:
+    // Create a singleton instance (not thread safe)
+    static QMA6100PSingleton *GetInstance();
+
+    // Singletons should not be cloneable.
+    QMA6100PSingleton(QMA6100PSingleton &other) = delete;
+
+    // Singletons should not be assignable.
+    void operator=(const QMA6100PSingleton &) = delete;
+
+    // Initialise the motion sensor singleton for normal operation
+    bool init(ScanI2C::FoundDevice device);
+
+    // Enable Wake on Motion interrupts (sensor must be initialised first)
+    bool setWakeOnMotion();
+};
+
+class QMA6100PSensor : public MotionSensor
+{
+  private:
+    QMA6100PSingleton *sensor = nullptr;
+
+  public:
+    explicit QMA6100PSensor(ScanI2C::FoundDevice foundDevice);
+
+    // Initialise the motion sensor
+    virtual bool init() override;
+
+    // Called each time our sensor gets a chance to run
+    virtual int32_t runOnce() override;
+};
+
+#endif
+
+#endif
\ No newline at end of file
diff --git a/src/motion/STK8XXXSensor.cpp b/src/motion/STK8XXXSensor.cpp
index 72b4bc3a8..377ee3c37 100755
--- a/src/motion/STK8XXXSensor.cpp
+++ b/src/motion/STK8XXXSensor.cpp
@@ -1,6 +1,6 @@
 #include "STK8XXXSensor.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_STK8XXX)
 
 STK8XXXSensor::STK8XXXSensor(ScanI2C::FoundDevice foundDevice) : MotionSensor::MotionSensor(foundDevice) {}
 
@@ -17,10 +17,10 @@ bool STK8XXXSensor::init()
         attachInterrupt(
             digitalPinToInterrupt(STK8XXX_INT), [] { STK_IRQ = true; }, RISING);
 
-        LOG_DEBUG("STK8XXXSensor::init ok");
+        LOG_DEBUG("STK8XXX init ok");
         return true;
     }
-    LOG_DEBUG("STK8XXXSensor::init failed");
+    LOG_DEBUG("STK8XXX init failed");
     return false;
 }
 
diff --git a/src/motion/STK8XXXSensor.h b/src/motion/STK8XXXSensor.h
index 190b916b4..cff98d87d 100755
--- a/src/motion/STK8XXXSensor.h
+++ b/src/motion/STK8XXXSensor.h
@@ -4,7 +4,7 @@
 
 #include "MotionSensor.h"
 
-#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C
+#if !defined(ARCH_PORTDUINO) && !defined(ARCH_STM32WL) && !MESHTASTIC_EXCLUDE_I2C && defined(HAS_STK8XXX)
 
 #ifdef STK8XXX_INT
 
diff --git a/src/mqtt/MQTT.cpp b/src/mqtt/MQTT.cpp
index 45518153e..4260ae201 100644
--- a/src/mqtt/MQTT.cpp
+++ b/src/mqtt/MQTT.cpp
@@ -19,24 +19,240 @@
 #include 
 #endif
 #include "Default.h"
+#if !defined(ARCH_NRF52) || NRF52_USE_JSON
 #include "serialization/JSON.h"
 #include "serialization/MeshPacketSerializer.h"
+#endif
 #include 
 #include 
+#include 
+#include 
 
-const int reconnectMax = 5;
+#include 
+#if defined(ARCH_PORTDUINO)
+#include 
+#elif !defined(ntohl)
+#include 
+#define ntohl __ntohl
+#endif
 
 MQTT *mqtt;
 
-static MemoryDynamic staticMqttPool;
-
-Allocator &mqttPool = staticMqttPool;
+namespace
+{
+constexpr int reconnectMax = 5;
 
 // FIXME - this size calculation is super sloppy, but it will go away once we dynamically alloc meshpackets
 static uint8_t bytes[meshtastic_MqttClientProxyMessage_size + 30]; // 12 for channel name and 16 for nodeid
 
 static bool isMqttServerAddressPrivate = false;
 
+// meshtastic_ServiceEnvelope that automatically releases dynamically allocated memory when it goes out of scope.
+struct DecodedServiceEnvelope : public meshtastic_ServiceEnvelope {
+    DecodedServiceEnvelope() = delete;
+    DecodedServiceEnvelope(const uint8_t *payload, size_t length)
+        : meshtastic_ServiceEnvelope(meshtastic_ServiceEnvelope_init_default),
+          validDecode(pb_decode_from_bytes(payload, length, &meshtastic_ServiceEnvelope_msg, this))
+    {
+    }
+    ~DecodedServiceEnvelope()
+    {
+        if (validDecode)
+            pb_release(&meshtastic_ServiceEnvelope_msg, this);
+    }
+    // Clients must check that this is true before using.
+    const bool validDecode;
+};
+
+inline void onReceiveProto(char *topic, byte *payload, size_t length)
+{
+    const DecodedServiceEnvelope e(payload, length);
+    if (!e.validDecode || e.channel_id == NULL || e.gateway_id == NULL || e.packet == NULL) {
+        LOG_ERROR("Invalid MQTT service envelope, topic %s, len %u!", topic, length);
+        return;
+    }
+    const meshtastic_Channel &ch = channels.getByName(e.channel_id);
+    if (strcmp(e.gateway_id, owner.id) == 0) {
+        // Generate an implicit ACK towards ourselves (handled and processed only locally!) for this message.
+        // We do this because packets are not rebroadcasted back into MQTT anymore and we assume that at least one node
+        // receives it when we get our own packet back. Then we'll stop our retransmissions.
+        if (isFromUs(e.packet))
+            routingModule->sendAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
+        else
+            LOG_INFO("Ignore downlink message we originally sent");
+        return;
+    }
+    if (isFromUs(e.packet)) {
+        LOG_INFO("Ignore downlink message we originally sent");
+        return;
+    }
+
+    // Find channel by channel_id and check downlink_enabled
+    if (!(strcmp(e.channel_id, "PKI") == 0 ||
+          (strcmp(e.channel_id, channels.getGlobalId(ch.index)) == 0 && ch.settings.downlink_enabled))) {
+        return;
+    }
+    LOG_INFO("Received MQTT topic %s, len=%u", topic, length);
+
+    UniquePacketPoolPacket p = packetPool.allocUniqueCopy(*e.packet);
+    p->via_mqtt = true; // Mark that the packet was received via MQTT
+    // Unset received SNR/RSSI which might have been added by the MQTT gateway
+    p->rx_snr = 0;
+    p->rx_rssi = 0;
+
+    if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        if (moduleConfig.mqtt.encryption_enabled) {
+            LOG_INFO("Ignore decoded message on MQTT, encryption is enabled");
+            return;
+        }
+        if (p->decoded.portnum == meshtastic_PortNum_ADMIN_APP) {
+            LOG_INFO("Ignore decoded admin packet");
+            return;
+        }
+        p->channel = ch.index;
+    }
+
+    // PKI messages get accepted even if we can't decrypt
+    if (router && p->which_payload_variant == meshtastic_MeshPacket_encrypted_tag && strcmp(e.channel_id, "PKI") == 0) {
+        const meshtastic_NodeInfoLite *tx = nodeDB->getMeshNode(getFrom(p.get()));
+        const meshtastic_NodeInfoLite *rx = nodeDB->getMeshNode(p->to);
+        // Only accept PKI messages to us, or if we have both the sender and receiver in our nodeDB, as then it's
+        // likely they discovered each other via a channel we have downlink enabled for
+        if (isToUs(p.get()) || (tx && tx->has_user && rx && rx->has_user))
+            router->enqueueReceivedMessage(p.release());
+    } else if (router && perhapsDecode(p.get())) // ignore messages if we don't have the channel key
+        router->enqueueReceivedMessage(p.release());
+}
+
+#if !defined(ARCH_NRF52) || NRF52_USE_JSON
+// returns true if this is a valid JSON envelope which we accept on downlink
+inline bool isValidJsonEnvelope(JSONObject &json)
+{
+    // if "sender" is provided, avoid processing packets we uplinked
+    return (json.find("sender") != json.end() ? (json["sender"]->AsString().compare(owner.id) != 0) : true) &&
+           (json.find("hopLimit") != json.end() ? json["hopLimit"]->IsNumber() : true) && // hop limit should be a number
+           (json.find("from") != json.end()) && json["from"]->IsNumber() &&
+           (json["from"]->AsNumber() == nodeDB->getNodeNum()) &&            // only accept message if the "from" is us
+           (json.find("type") != json.end()) && json["type"]->IsString() && // should specify a type
+           (json.find("payload") != json.end());                            // should have a payload
+}
+
+inline void onReceiveJson(byte *payload, size_t length)
+{
+    char payloadStr[length + 1];
+    memcpy(payloadStr, payload, length);
+    payloadStr[length] = 0; // null terminated string
+    std::unique_ptr json_value(JSON::Parse(payloadStr));
+    if (json_value == nullptr) {
+        LOG_ERROR("JSON received payload on MQTT but not a valid JSON");
+        return;
+    }
+
+    JSONObject json;
+    json = json_value->AsObject();
+
+    if (!isValidJsonEnvelope(json)) {
+        LOG_ERROR("JSON received payload on MQTT but not a valid envelope");
+        return;
+    }
+
+    // this is a valid envelope
+    if (json["type"]->AsString().compare("sendtext") == 0 && json["payload"]->IsString()) {
+        std::string jsonPayloadStr = json["payload"]->AsString();
+        LOG_INFO("JSON payload %s, length %u", jsonPayloadStr.c_str(), jsonPayloadStr.length());
+
+        // construct protobuf data packet using TEXT_MESSAGE, send it to the mesh
+        meshtastic_MeshPacket *p = router->allocForSending();
+        p->decoded.portnum = meshtastic_PortNum_TEXT_MESSAGE_APP;
+        if (json.find("channel") != json.end() && json["channel"]->IsNumber() &&
+            (json["channel"]->AsNumber() < channels.getNumChannels()))
+            p->channel = json["channel"]->AsNumber();
+        if (json.find("to") != json.end() && json["to"]->IsNumber())
+            p->to = json["to"]->AsNumber();
+        if (json.find("hopLimit") != json.end() && json["hopLimit"]->IsNumber())
+            p->hop_limit = json["hopLimit"]->AsNumber();
+        if (jsonPayloadStr.length() <= sizeof(p->decoded.payload.bytes)) {
+            memcpy(p->decoded.payload.bytes, jsonPayloadStr.c_str(), jsonPayloadStr.length());
+            p->decoded.payload.size = jsonPayloadStr.length();
+            service->sendToMesh(p, RX_SRC_LOCAL);
+        } else {
+            LOG_WARN("Received MQTT json payload too long, drop");
+        }
+    } else if (json["type"]->AsString().compare("sendposition") == 0 && json["payload"]->IsObject()) {
+        // invent the "sendposition" type for a valid envelope
+        JSONObject posit;
+        posit = json["payload"]->AsObject(); // get nested JSON Position
+        meshtastic_Position pos = meshtastic_Position_init_default;
+        if (posit.find("latitude_i") != posit.end() && posit["latitude_i"]->IsNumber())
+            pos.latitude_i = posit["latitude_i"]->AsNumber();
+        if (posit.find("longitude_i") != posit.end() && posit["longitude_i"]->IsNumber())
+            pos.longitude_i = posit["longitude_i"]->AsNumber();
+        if (posit.find("altitude") != posit.end() && posit["altitude"]->IsNumber())
+            pos.altitude = posit["altitude"]->AsNumber();
+        if (posit.find("time") != posit.end() && posit["time"]->IsNumber())
+            pos.time = posit["time"]->AsNumber();
+
+        // construct protobuf data packet using POSITION, send it to the mesh
+        meshtastic_MeshPacket *p = router->allocForSending();
+        p->decoded.portnum = meshtastic_PortNum_POSITION_APP;
+        if (json.find("channel") != json.end() && json["channel"]->IsNumber() &&
+            (json["channel"]->AsNumber() < channels.getNumChannels()))
+            p->channel = json["channel"]->AsNumber();
+        if (json.find("to") != json.end() && json["to"]->IsNumber())
+            p->to = json["to"]->AsNumber();
+        if (json.find("hopLimit") != json.end() && json["hopLimit"]->IsNumber())
+            p->hop_limit = json["hopLimit"]->AsNumber();
+        p->decoded.payload.size =
+            pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes), &meshtastic_Position_msg,
+                               &pos); // make the Data protobuf from position
+        service->sendToMesh(p, RX_SRC_LOCAL);
+    } else {
+        LOG_DEBUG("JSON ignore downlink message with unsupported type");
+    }
+}
+#endif
+
+/// Determines if the given IPAddress is a private IPv4 address, i.e. not routable on the public internet.
+bool isPrivateIpAddress(const IPAddress &ip)
+{
+    constexpr struct {
+        uint32_t network;
+        uint32_t mask;
+    } privateCidrRanges[] = {
+        {.network = 192u << 24 | 168 << 16, .mask = 0xffff0000}, // 192.168.0.0/16
+        {.network = 172u << 24 | 16 << 16, .mask = 0xfff00000},  // 172.16.0.0/12
+        {.network = 169u << 24 | 254 << 16, .mask = 0xffff0000}, // 169.254.0.0/16
+        {.network = 10u << 24, .mask = 0xff000000},              // 10.0.0.0/8
+        {.network = 127u << 24 | 1, .mask = 0xffffffff},         // 127.0.0.1/32
+    };
+    const uint32_t addr = ntohl(ip);
+    for (const auto &cidrRange : privateCidrRanges) {
+        if (cidrRange.network == (addr & cidrRange.mask)) {
+            LOG_INFO("MQTT server on a private IP");
+            return true;
+        }
+    }
+    return false;
+}
+
+// Separate a [:] string. Returns a pair containing the parsed host and port. If the port is
+// not present in the input string, or is invalid, the value of the `port` argument will be returned.
+std::pair parseHostAndPort(String server, uint16_t port = 0)
+{
+    const int delimIndex = server.indexOf(':');
+    if (delimIndex > 0) {
+        const long parsedPort = server.substring(delimIndex + 1, server.length()).toInt();
+        if (parsedPort < 1 || parsedPort > UINT16_MAX) {
+            LOG_WARN("Invalid MQTT port %d: %s", parsedPort, server.c_str());
+        } else {
+            port = parsedPort;
+        }
+        server[delimIndex] = 0;
+    }
+    return std::make_pair(std::move(server), port);
+}
+} // namespace
+
 void MQTT::mqttCallback(char *topic, byte *payload, unsigned int length)
 {
     mqtt->onReceive(topic, payload, length);
@@ -49,161 +265,32 @@ void MQTT::onClientProxyReceive(meshtastic_MqttClientProxyMessage msg)
 
 void MQTT::onReceive(char *topic, byte *payload, size_t length)
 {
-    meshtastic_ServiceEnvelope e = meshtastic_ServiceEnvelope_init_default;
-
-    if (moduleConfig.mqtt.json_enabled && (strncmp(topic, jsonTopic.c_str(), jsonTopic.length()) == 0)) {
-        // check if this is a json payload message by comparing the topic start
-        char payloadStr[length + 1];
-        memcpy(payloadStr, payload, length);
-        payloadStr[length] = 0; // null terminated string
-        JSONValue *json_value = JSON::Parse(payloadStr);
-        if (json_value != NULL) {
-            // check if it is a valid envelope
-            JSONObject json;
-            json = json_value->AsObject();
-
-            // parse the channel name from the topic string
-            // the topic has been checked above for having jsonTopic prefix, so just move past it
-            char *ptr = topic + jsonTopic.length();
-            ptr = strtok(ptr, "/") ? strtok(ptr, "/") : ptr; // if another "/" was added, parse string up to that character
-            meshtastic_Channel sendChannel = channels.getByName(ptr);
-            // We allow downlink JSON packets only on a channel named "mqtt"
-            if (strncasecmp(channels.getGlobalId(sendChannel.index), Channels::mqttChannel, strlen(Channels::mqttChannel)) == 0 &&
-                sendChannel.settings.downlink_enabled) {
-                if (isValidJsonEnvelope(json)) {
-                    // this is a valid envelope
-                    if (json["type"]->AsString().compare("sendtext") == 0 && json["payload"]->IsString()) {
-                        std::string jsonPayloadStr = json["payload"]->AsString();
-                        LOG_INFO("JSON payload %s, length %u", jsonPayloadStr.c_str(), jsonPayloadStr.length());
-
-                        // construct protobuf data packet using TEXT_MESSAGE, send it to the mesh
-                        meshtastic_MeshPacket *p = router->allocForSending();
-                        p->decoded.portnum = meshtastic_PortNum_TEXT_MESSAGE_APP;
-                        if (json.find("channel") != json.end() && json["channel"]->IsNumber() &&
-                            (json["channel"]->AsNumber() < channels.getNumChannels()))
-                            p->channel = json["channel"]->AsNumber();
-                        if (json.find("to") != json.end() && json["to"]->IsNumber())
-                            p->to = json["to"]->AsNumber();
-                        if (json.find("hopLimit") != json.end() && json["hopLimit"]->IsNumber())
-                            p->hop_limit = json["hopLimit"]->AsNumber();
-                        if (jsonPayloadStr.length() <= sizeof(p->decoded.payload.bytes)) {
-                            memcpy(p->decoded.payload.bytes, jsonPayloadStr.c_str(), jsonPayloadStr.length());
-                            p->decoded.payload.size = jsonPayloadStr.length();
-                            service->sendToMesh(p, RX_SRC_LOCAL);
-                        } else {
-                            LOG_WARN("Received MQTT json payload too long, dropping");
-                        }
-                    } else if (json["type"]->AsString().compare("sendposition") == 0 && json["payload"]->IsObject()) {
-                        // invent the "sendposition" type for a valid envelope
-                        JSONObject posit;
-                        posit = json["payload"]->AsObject(); // get nested JSON Position
-                        meshtastic_Position pos = meshtastic_Position_init_default;
-                        if (posit.find("latitude_i") != posit.end() && posit["latitude_i"]->IsNumber())
-                            pos.latitude_i = posit["latitude_i"]->AsNumber();
-                        if (posit.find("longitude_i") != posit.end() && posit["longitude_i"]->IsNumber())
-                            pos.longitude_i = posit["longitude_i"]->AsNumber();
-                        if (posit.find("altitude") != posit.end() && posit["altitude"]->IsNumber())
-                            pos.altitude = posit["altitude"]->AsNumber();
-                        if (posit.find("time") != posit.end() && posit["time"]->IsNumber())
-                            pos.time = posit["time"]->AsNumber();
-
-                        // construct protobuf data packet using POSITION, send it to the mesh
-                        meshtastic_MeshPacket *p = router->allocForSending();
-                        p->decoded.portnum = meshtastic_PortNum_POSITION_APP;
-                        if (json.find("channel") != json.end() && json["channel"]->IsNumber() &&
-                            (json["channel"]->AsNumber() < channels.getNumChannels()))
-                            p->channel = json["channel"]->AsNumber();
-                        if (json.find("to") != json.end() && json["to"]->IsNumber())
-                            p->to = json["to"]->AsNumber();
-                        if (json.find("hopLimit") != json.end() && json["hopLimit"]->IsNumber())
-                            p->hop_limit = json["hopLimit"]->AsNumber();
-                        p->decoded.payload.size =
-                            pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes),
-                                               &meshtastic_Position_msg, &pos); // make the Data protobuf from position
-                        service->sendToMesh(p, RX_SRC_LOCAL);
-                    } else {
-                        LOG_DEBUG("JSON Ignoring downlink message with unsupported type.");
-                    }
-                } else {
-                    LOG_ERROR("JSON Received payload on MQTT but not a valid envelope.");
-                }
-            } else {
-                LOG_WARN("JSON downlink received on channel not called 'mqtt' or without downlink enabled.");
-            }
-        } else {
-            // no json, this is an invalid payload
-            LOG_ERROR("JSON Received payload on MQTT but not a valid JSON");
-        }
-        delete json_value;
-    } else {
-        if (length == 0) {
-            LOG_WARN("Empty MQTT payload received, topic %s!", topic);
-            return;
-        } else if (!pb_decode_from_bytes(payload, length, &meshtastic_ServiceEnvelope_msg, &e)) {
-            LOG_ERROR("Invalid MQTT service envelope, topic %s, len %u!", topic, length);
-            return;
-        } else {
-            if (e.channel_id == NULL || e.gateway_id == NULL) {
-                LOG_ERROR("Invalid MQTT service envelope, topic %s, len %u!", topic, length);
-                return;
-            }
-            meshtastic_Channel ch = channels.getByName(e.channel_id);
-            if (strcmp(e.gateway_id, owner.id) == 0) {
-                // Generate an implicit ACK towards ourselves (handled and processed only locally!) for this message.
-                // We do this because packets are not rebroadcasted back into MQTT anymore and we assume that at least one node
-                // receives it when we get our own packet back. Then we'll stop our retransmissions.
-                if (e.packet && isFromUs(e.packet))
-                    routingModule->sendAckNak(meshtastic_Routing_Error_NONE, getFrom(e.packet), e.packet->id, ch.index);
-                else
-                    LOG_INFO("Ignoring downlink message we originally sent.");
-            } else {
-                // Find channel by channel_id and check downlink_enabled
-                if ((strcmp(e.channel_id, "PKI") == 0 && e.packet) ||
-                    (strcmp(e.channel_id, channels.getGlobalId(ch.index)) == 0 && e.packet && ch.settings.downlink_enabled)) {
-                    LOG_INFO("Received MQTT topic %s, len=%u", topic, length);
-                    meshtastic_MeshPacket *p = packetPool.allocCopy(*e.packet);
-                    p->via_mqtt = true; // Mark that the packet was received via MQTT
-
-                    if (isFromUs(p)) {
-                        LOG_INFO("Ignoring downlink message we originally sent.");
-                        packetPool.release(p);
-                        return;
-                    }
-                    if (p->which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-                        if (moduleConfig.mqtt.encryption_enabled) {
-                            LOG_INFO("Ignoring decoded message on MQTT, encryption is enabled.");
-                            packetPool.release(p);
-                            return;
-                        }
-                        if (p->decoded.portnum == meshtastic_PortNum_ADMIN_APP) {
-                            LOG_INFO("Ignoring decoded admin packet.");
-                            packetPool.release(p);
-                            return;
-                        }
-                        p->channel = ch.index;
-                    }
-
-                    // PKI messages get accepted even if we can't decrypt
-                    if (router && p->which_payload_variant == meshtastic_MeshPacket_encrypted_tag &&
-                        strcmp(e.channel_id, "PKI") == 0) {
-                        const meshtastic_NodeInfoLite *tx = nodeDB->getMeshNode(getFrom(p));
-                        const meshtastic_NodeInfoLite *rx = nodeDB->getMeshNode(p->to);
-                        // Only accept PKI messages to us, or if we have both the sender and receiver in our nodeDB, as then it's
-                        // likely they discovered each other via a channel we have downlink enabled for
-                        if (isToUs(p) || (tx && tx->has_user && rx && rx->has_user))
-                            router->enqueueReceivedMessage(p);
-                    } else if (router && perhapsDecode(p)) // ignore messages if we don't have the channel key
-                        router->enqueueReceivedMessage(p);
-                    else
-                        packetPool.release(p);
-                }
-            }
-        }
-        // make sure to free both strings and the MeshPacket (passing in NULL is acceptable)
-        free(e.channel_id);
-        free(e.gateway_id);
-        free(e.packet);
+    if (length == 0) {
+        LOG_WARN("Empty MQTT payload received, topic %s!", topic);
+        return;
     }
+
+    // check if this is a json payload message by comparing the topic start
+    if (moduleConfig.mqtt.json_enabled && (strncmp(topic, jsonTopic.c_str(), jsonTopic.length()) == 0)) {
+#if !defined(ARCH_NRF52) || NRF52_USE_JSON
+        // parse the channel name from the topic string
+        // the topic has been checked above for having jsonTopic prefix, so just move past it
+        char *channelName = topic + jsonTopic.length();
+        // if another "/" was added, parse string up to that character
+        channelName = strtok(channelName, "/") ? strtok(channelName, "/") : channelName;
+        // We allow downlink JSON packets only on a channel named "mqtt"
+        meshtastic_Channel &sendChannel = channels.getByName(channelName);
+        if (!(strncasecmp(channels.getGlobalId(sendChannel.index), Channels::mqttChannel, strlen(Channels::mqttChannel)) == 0 &&
+              sendChannel.settings.downlink_enabled)) {
+            LOG_WARN("JSON downlink received on channel not called 'mqtt' or without downlink enabled");
+            return;
+        }
+        onReceiveJson(payload, length);
+#endif
+        return;
+    }
+
+    onReceiveProto(topic, payload, length);
 }
 
 void mqttInit()
@@ -218,7 +305,7 @@ MQTT::MQTT() : concurrency::OSThread("mqtt"), mqttQueue(MAX_MQTT_QUEUE)
 #endif
 {
     if (moduleConfig.mqtt.enabled) {
-        LOG_DEBUG("Initializing MQTT");
+        LOG_DEBUG("Init MQTT");
 
         assert(!mqtt);
         mqtt = this;
@@ -240,10 +327,10 @@ MQTT::MQTT() : concurrency::OSThread("mqtt"), mqttQueue(MAX_MQTT_QUEUE)
                 moduleConfig.mqtt.map_report_settings.publish_interval_secs, default_map_publish_interval_secs);
         }
 
-        isMqttServerAddressPrivate = isPrivateIpAddress(moduleConfig.mqtt.address);
-        if (isMqttServerAddressPrivate) {
-            LOG_INFO("MQTT server is a private IP address.");
-        }
+        String host = parseHostAndPort(moduleConfig.mqtt.address).first;
+        isConfiguredForDefaultServer = host.length() == 0 || host == default_mqtt_address;
+        IPAddress ip;
+        isMqttServerAddressPrivate = ip.fromString(host.c_str()) && isPrivateIpAddress(ip);
 
 #if HAS_NETWORKING
         if (!moduleConfig.mqtt.proxy_to_client_enabled)
@@ -251,7 +338,7 @@ MQTT::MQTT() : concurrency::OSThread("mqtt"), mqttQueue(MAX_MQTT_QUEUE)
 #endif
 
         if (moduleConfig.mqtt.proxy_to_client_enabled) {
-            LOG_INFO("MQTT configured to use client proxy...");
+            LOG_INFO("MQTT configured to use client proxy");
             enabled = true;
             runASAP = true;
             reconnectCount = 0;
@@ -315,7 +402,7 @@ void MQTT::reconnect()
 {
     if (wantsLink()) {
         if (moduleConfig.mqtt.proxy_to_client_enabled) {
-            LOG_INFO("MQTT connecting via client proxy instead...");
+            LOG_INFO("MQTT connect via client proxy instead");
             enabled = true;
             runASAP = true;
             reconnectCount = 0;
@@ -336,7 +423,7 @@ void MQTT::reconnect()
             mqttPassword = moduleConfig.mqtt.password;
         }
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
-#if !defined(CONFIG_IDF_TARGET_ESP32C6) && !defined(RPI_PICO)
+#if !defined(CONFIG_IDF_TARGET_ESP32C6)
         if (moduleConfig.mqtt.tls_enabled) {
             // change default for encrypted to 8883
             try {
@@ -344,12 +431,12 @@ void MQTT::reconnect()
                 wifiSecureClient.setInsecure();
 
                 pubSub.setClient(wifiSecureClient);
-                LOG_INFO("Using TLS-encrypted session");
+                LOG_INFO("Use TLS-encrypted session");
             } catch (const std::exception &e) {
                 LOG_ERROR("MQTT ERROR: %s", e.what());
             }
         } else {
-            LOG_INFO("Using non-TLS-encrypted session");
+            LOG_INFO("Use non-TLS-encrypted session");
             pubSub.setClient(mqttClient);
         }
 #else
@@ -359,19 +446,14 @@ void MQTT::reconnect()
         pubSub.setClient(mqttClient);
 #endif
 
-        String server = String(serverAddr);
-        int delimIndex = server.indexOf(':');
-        if (delimIndex > 0) {
-            String port = server.substring(delimIndex + 1, server.length());
-            server[delimIndex] = 0;
-            serverPort = port.toInt();
-            serverAddr = server.c_str();
-        }
+        std::pair hostAndPort = parseHostAndPort(serverAddr, serverPort);
+        serverAddr = hostAndPort.first.c_str();
+        serverPort = hostAndPort.second;
         pubSub.setServer(serverAddr, serverPort);
         pubSub.setBufferSize(512);
 
-        LOG_INFO("Attempting to connect directly to MQTT server %s, port: %d, username: %s, password: %s", serverAddr, serverPort,
-                 mqttUsername, mqttPassword);
+        LOG_INFO("Connect directly to MQTT server %s, port: %d, username: %s, password: %s", serverAddr, serverPort, mqttUsername,
+                 mqttPassword);
 
         bool connected = pubSub.connect(owner.id, mqttUsername, mqttPassword);
         if (connected) {
@@ -379,13 +461,14 @@ void MQTT::reconnect()
             enabled = true; // Start running background process again
             runASAP = true;
             reconnectCount = 0;
+            isMqttServerAddressPrivate = isPrivateIpAddress(mqttClient.remoteIP());
 
             publishNodeInfo();
             sendSubscriptions();
         } else {
 #if HAS_WIFI && !defined(ARCH_PORTDUINO)
             reconnectCount++;
-            LOG_ERROR("Failed to contact MQTT server directly (%d/%d)...", reconnectCount, reconnectMax);
+            LOG_ERROR("Failed to contact MQTT server directly (%d/%d)", reconnectCount, reconnectMax);
             if (reconnectCount >= reconnectMax) {
                 needReconnect = true;
                 wifiReconnect->setIntervalFromNow(0);
@@ -407,13 +490,13 @@ void MQTT::sendSubscriptions()
         if (ch.settings.downlink_enabled) {
             hasDownlink = true;
             std::string topic = cryptTopic + channels.getGlobalId(i) + "/+";
-            LOG_INFO("Subscribing to %s", topic.c_str());
+            LOG_INFO("Subscribe to %s", topic.c_str());
             pubSub.subscribe(topic.c_str(), 1); // FIXME, is QOS 1 right?
 #if !defined(ARCH_NRF52) ||                                                                                                      \
     defined(NRF52_USE_JSON) // JSON is not supported on nRF52, see issue #2804 ### Fixed by using ArduinoJSON ###
             if (moduleConfig.mqtt.json_enabled == true) {
                 std::string topicDecoded = jsonTopic + channels.getGlobalId(i) + "/+";
-                LOG_INFO("Subscribing to %s", topicDecoded.c_str());
+                LOG_INFO("Subscribe to %s", topicDecoded.c_str());
                 pubSub.subscribe(topicDecoded.c_str(), 1); // FIXME, is QOS 1 right?
             }
 #endif // ARCH_NRF52 NRF52_USE_JSON
@@ -422,7 +505,7 @@ void MQTT::sendSubscriptions()
 #if !MESHTASTIC_EXCLUDE_PKI
     if (hasDownlink) {
         std::string topic = cryptTopic + "PKI/+";
-        LOG_INFO("Subscribing to %s", topic.c_str());
+        LOG_INFO("Subscribe to %s", topic.c_str());
         pubSub.subscribe(topic.c_str(), 1);
     }
 #endif
@@ -478,7 +561,7 @@ int32_t MQTT::runOnce()
     } else {
         // we are connected to server, check often for new requests on the TCP port
         if (!wantConnection) {
-            LOG_INFO("MQTT link not needed, dropping");
+            LOG_INFO("MQTT link not needed, drop");
             pubSub.disconnect();
         }
 
@@ -495,39 +578,37 @@ void MQTT::publishNodeInfo()
 }
 void MQTT::publishQueuedMessages()
 {
-    if (!mqttQueue.isEmpty()) {
-        LOG_DEBUG("Publishing enqueued MQTT message");
-        meshtastic_ServiceEnvelope *env = mqttQueue.dequeuePtr(0);
-        size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, env);
-        std::string topic;
-        if (env->packet->pki_encrypted) {
-            topic = cryptTopic + "PKI/" + owner.id;
-        } else {
-            topic = cryptTopic + env->channel_id + "/" + owner.id;
-        }
-        LOG_INFO("publish %s, %u bytes from queue", topic.c_str(), numBytes);
+    if (mqttQueue.isEmpty())
+        return;
 
-        publish(topic.c_str(), bytes, numBytes, false);
+    LOG_DEBUG("Publish enqueued MQTT message");
+    const std::unique_ptr entry(mqttQueue.dequeuePtr(0));
+    LOG_INFO("publish %s, %u bytes from queue", entry->topic.c_str(), entry->envBytes.size());
+    publish(entry->topic.c_str(), entry->envBytes.data(), entry->envBytes.size(), false);
 
 #if !defined(ARCH_NRF52) ||                                                                                                      \
     defined(NRF52_USE_JSON) // JSON is not supported on nRF52, see issue #2804 ### Fixed by using ArduinoJson ###
-        if (moduleConfig.mqtt.json_enabled) {
-            // handle json topic
-            auto jsonString = MeshPacketSerializer::JsonSerialize(env->packet);
-            if (jsonString.length() != 0) {
-                std::string topicJson;
-                if (env->packet->pki_encrypted) {
-                    topicJson = jsonTopic + "PKI/" + owner.id;
-                } else {
-                    topicJson = jsonTopic + env->channel_id + "/" + owner.id;
-                }
-                LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(), jsonString.c_str());
-                publish(topicJson.c_str(), jsonString.c_str(), false);
-            }
-        }
-#endif // ARCH_NRF52 NRF52_USE_JSON
-        mqttPool.release(env);
+    if (!moduleConfig.mqtt.json_enabled)
+        return;
+
+    // handle json topic
+    const DecodedServiceEnvelope env(entry->envBytes.data(), entry->envBytes.size());
+    if (!env.validDecode || env.packet == NULL || env.channel_id == NULL)
+        return;
+
+    auto jsonString = MeshPacketSerializer::JsonSerialize(env.packet);
+    if (jsonString.length() == 0)
+        return;
+
+    std::string topicJson;
+    if (env.packet->pki_encrypted) {
+        topicJson = jsonTopic + "PKI/" + owner.id;
+    } else {
+        topicJson = jsonTopic + env.channel_id + "/" + owner.id;
     }
+    LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(), jsonString.c_str());
+    publish(topicJson.c_str(), jsonString.c_str(), false);
+#endif // ARCH_NRF52 NRF52_USE_JSON
 }
 
 void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_MeshPacket &mp_decoded, ChannelIndex chIndex)
@@ -545,18 +626,18 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_Me
 
     // mp_decoded will not be decoded when it's PKI encrypted and not directed to us
     if (mp_decoded.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        // For uplinking other's packets, check if it's not OK to MQTT or if it's an older packet without the bitfield
+        bool dontUplink = !mp_decoded.decoded.has_bitfield || !(mp_decoded.decoded.bitfield & BITFIELD_OK_TO_MQTT_MASK);
         // check for the lowest bit of the data bitfield set false, and the use of one of the default keys.
-        if (!isFromUs(&mp_decoded) && !isMqttServerAddressPrivate && mp_decoded.decoded.has_bitfield &&
-            !(mp_decoded.decoded.bitfield & BITFIELD_OK_TO_MQTT_MASK) &&
+        if (!isFromUs(&mp_decoded) && !isMqttServerAddressPrivate && dontUplink &&
             (ch.settings.psk.size < 2 || (ch.settings.psk.size == 16 && memcmp(ch.settings.psk.bytes, defaultpsk, 16)) ||
              (ch.settings.psk.size == 32 && memcmp(ch.settings.psk.bytes, eventpsk, 32)))) {
             LOG_INFO("MQTT onSend - Not forwarding packet due to DontMqttMeBro flag");
             return;
         }
 
-        if (strcmp(moduleConfig.mqtt.address, default_mqtt_address) == 0 &&
-            (mp_decoded.decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP ||
-             mp_decoded.decoded.portnum == meshtastic_PortNum_DETECTION_SENSOR_APP)) {
+        if (isConfiguredForDefaultServer && (mp_decoded.decoded.portnum == meshtastic_PortNum_RANGE_TEST_APP ||
+                                             mp_decoded.decoded.portnum == meshtastic_PortNum_DETECTION_SENSOR_APP)) {
             LOG_DEBUG("MQTT onSend - Ignoring range test or detection sensor message on public mqtt");
             return;
         }
@@ -564,58 +645,56 @@ void MQTT::onSend(const meshtastic_MeshPacket &mp_encrypted, const meshtastic_Me
     // Either encrypted packet (we couldn't decrypt) is marked as pki_encrypted, or we could decode the PKI encrypted packet
     bool isPKIEncrypted = mp_encrypted.pki_encrypted || mp_decoded.pki_encrypted;
     // If it was to a channel, check uplink enabled, else must be pki_encrypted
-    if ((ch.settings.uplink_enabled && !isPKIEncrypted) || isPKIEncrypted) {
-        const char *channelId = isPKIEncrypted ? "PKI" : channels.getGlobalId(chIndex);
+    if (!(ch.settings.uplink_enabled || isPKIEncrypted))
+        return;
+    const char *channelId = isPKIEncrypted ? "PKI" : channels.getGlobalId(chIndex);
 
-        meshtastic_ServiceEnvelope *env = mqttPool.allocZeroed();
-        env->channel_id = (char *)channelId;
-        env->gateway_id = owner.id;
+    LOG_DEBUG("MQTT onSend - Publish ");
+    const meshtastic_MeshPacket *p;
+    if (moduleConfig.mqtt.encryption_enabled) {
+        p = &mp_encrypted;
+        LOG_DEBUG("encrypted message");
+    } else if (mp_decoded.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        p = &mp_decoded;
+        LOG_DEBUG("portnum %i message", mp_decoded.decoded.portnum);
+    } else {
+        LOG_DEBUG("nothing, pkt not decrypted");
+        return; // Don't upload a still-encrypted PKI packet if not encryption_enabled
+    }
 
-        LOG_DEBUG("MQTT onSend - Publishing ");
-        if (moduleConfig.mqtt.encryption_enabled) {
-            env->packet = (meshtastic_MeshPacket *)&mp_encrypted;
-            LOG_DEBUG("encrypted message");
-        } else if (mp_decoded.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
-            env->packet = (meshtastic_MeshPacket *)&mp_decoded;
-            LOG_DEBUG("portnum %i message", env->packet->decoded.portnum);
-        } else {
-            LOG_DEBUG("nothing, pkt not decrypted");
-            return; // Don't upload a still-encrypted PKI packet if not encryption_enabled
-        }
+    const meshtastic_ServiceEnvelope env = {
+        .packet = const_cast(p), .channel_id = const_cast(channelId), .gateway_id = owner.id};
+    size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, &env);
+    std::string topic = cryptTopic + channelId + "/" + owner.id;
 
-        if (moduleConfig.mqtt.proxy_to_client_enabled || this->isConnectedDirectly()) {
-            size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, env);
-            std::string topic = cryptTopic + channelId + "/" + owner.id;
-            LOG_DEBUG("MQTT Publish %s, %u bytes", topic.c_str(), numBytes);
-
-            publish(topic.c_str(), bytes, numBytes, false);
+    if (moduleConfig.mqtt.proxy_to_client_enabled || this->isConnectedDirectly()) {
+        LOG_DEBUG("MQTT Publish %s, %u bytes", topic.c_str(), numBytes);
+        publish(topic.c_str(), bytes, numBytes, false);
 
 #if !defined(ARCH_NRF52) ||                                                                                                      \
     defined(NRF52_USE_JSON) // JSON is not supported on nRF52, see issue #2804 ### Fixed by using ArduinoJson ###
-            if (moduleConfig.mqtt.json_enabled) {
-                // handle json topic
-                auto jsonString = MeshPacketSerializer::JsonSerialize((meshtastic_MeshPacket *)&mp_decoded);
-                if (jsonString.length() != 0) {
-                    std::string topicJson = jsonTopic + channelId + "/" + owner.id;
-                    LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(),
-                             jsonString.c_str());
-                    publish(topicJson.c_str(), jsonString.c_str(), false);
-                }
-            }
+        if (!moduleConfig.mqtt.json_enabled)
+            return;
+        // handle json topic
+        auto jsonString = MeshPacketSerializer::JsonSerialize(&mp_decoded);
+        if (jsonString.length() == 0)
+            return;
+        std::string topicJson = jsonTopic + channelId + "/" + owner.id;
+        LOG_INFO("JSON publish message to %s, %u bytes: %s", topicJson.c_str(), jsonString.length(), jsonString.c_str());
+        publish(topicJson.c_str(), jsonString.c_str(), false);
 #endif // ARCH_NRF52 NRF52_USE_JSON
+    } else {
+        LOG_INFO("MQTT not connected, queue packet");
+        QueueEntry *entry;
+        if (mqttQueue.numFree() == 0) {
+            LOG_WARN("MQTT queue is full, discard oldest");
+            entry = mqttQueue.dequeuePtr(0);
         } else {
-            LOG_INFO("MQTT not connected, queueing packet");
-            if (mqttQueue.numFree() == 0) {
-                LOG_WARN("NOTE: MQTT queue is full, discarding oldest");
-                meshtastic_ServiceEnvelope *d = mqttQueue.dequeuePtr(0);
-                if (d)
-                    mqttPool.release(d);
-            }
-            // make a copy of serviceEnvelope and queue it
-            meshtastic_ServiceEnvelope *copied = mqttPool.allocCopy(*env);
-            assert(mqttQueue.enqueue(copied, 0));
+            entry = new QueueEntry;
         }
-        mqttPool.release(env);
+        entry->topic = std::move(topic);
+        entry->envBytes.assign(bytes, numBytes);
+        assert(mqttQueue.enqueue(entry, 0));
     }
 }
 
@@ -624,122 +703,68 @@ void MQTT::perhapsReportToMap()
     if (!moduleConfig.mqtt.map_reporting_enabled || !(moduleConfig.mqtt.proxy_to_client_enabled || isConnectedDirectly()))
         return;
 
-    if (Throttle::isWithinTimespanMs(last_report_to_map, map_publish_interval_msecs)) {
+    if (Throttle::isWithinTimespanMs(last_report_to_map, map_publish_interval_msecs))
         return;
-    } else {
-        if (map_position_precision == 0 || (localPosition.latitude_i == 0 && localPosition.longitude_i == 0)) {
-            last_report_to_map = millis();
-            if (map_position_precision == 0)
-                LOG_WARN("MQTT Map reporting is enabled, but precision is 0");
-            if (localPosition.latitude_i == 0 && localPosition.longitude_i == 0)
-                LOG_WARN("MQTT Map reporting is enabled, but no position available.");
-            return;
-        }
 
-        // Allocate ServiceEnvelope and fill it
-        meshtastic_ServiceEnvelope *se = mqttPool.allocZeroed();
-        se->channel_id = (char *)channels.getGlobalId(channels.getPrimaryIndex()); // Use primary channel as the channel_id
-        se->gateway_id = owner.id;
-
-        // Allocate MeshPacket and fill it
-        meshtastic_MeshPacket *mp = packetPool.allocZeroed();
-        mp->which_payload_variant = meshtastic_MeshPacket_decoded_tag;
-        mp->from = nodeDB->getNodeNum();
-        mp->to = NODENUM_BROADCAST;
-        mp->decoded.portnum = meshtastic_PortNum_MAP_REPORT_APP;
-
-        // Fill MapReport message
-        meshtastic_MapReport mapReport = meshtastic_MapReport_init_default;
-        memcpy(mapReport.long_name, owner.long_name, sizeof(owner.long_name));
-        memcpy(mapReport.short_name, owner.short_name, sizeof(owner.short_name));
-        mapReport.role = config.device.role;
-        mapReport.hw_model = owner.hw_model;
-        strncpy(mapReport.firmware_version, optstr(APP_VERSION), sizeof(mapReport.firmware_version));
-        mapReport.region = config.lora.region;
-        mapReport.modem_preset = config.lora.modem_preset;
-        mapReport.has_default_channel = channels.hasDefaultChannel();
-
-        // Set position with precision (same as in PositionModule)
-        if (map_position_precision < 32 && map_position_precision > 0) {
-            mapReport.latitude_i = localPosition.latitude_i & (UINT32_MAX << (32 - map_position_precision));
-            mapReport.longitude_i = localPosition.longitude_i & (UINT32_MAX << (32 - map_position_precision));
-            mapReport.latitude_i += (1 << (31 - map_position_precision));
-            mapReport.longitude_i += (1 << (31 - map_position_precision));
-        } else {
-            mapReport.latitude_i = localPosition.latitude_i;
-            mapReport.longitude_i = localPosition.longitude_i;
-        }
-        mapReport.altitude = localPosition.altitude;
-        mapReport.position_precision = map_position_precision;
-
-        mapReport.num_online_local_nodes = nodeDB->getNumOnlineMeshNodes(true);
-
-        // Encode MapReport message and set it to MeshPacket in ServiceEnvelope
-        mp->decoded.payload.size = pb_encode_to_bytes(mp->decoded.payload.bytes, sizeof(mp->decoded.payload.bytes),
-                                                      &meshtastic_MapReport_msg, &mapReport);
-        se->packet = mp;
-
-        size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, se);
-
-        LOG_INFO("MQTT Publish map report to %s", mapTopic.c_str());
-        publish(mapTopic.c_str(), bytes, numBytes, false);
-
-        // Release the allocated memory for ServiceEnvelope and MeshPacket
-        mqttPool.release(se);
-        packetPool.release(mp);
-
-        // Update the last report time
+    if (map_position_precision == 0 || (localPosition.latitude_i == 0 && localPosition.longitude_i == 0)) {
         last_report_to_map = millis();
-    }
-}
-
-bool MQTT::isValidJsonEnvelope(JSONObject &json)
-{
-    // if "sender" is provided, avoid processing packets we uplinked
-    return (json.find("sender") != json.end() ? (json["sender"]->AsString().compare(owner.id) != 0) : true) &&
-           (json.find("hopLimit") != json.end() ? json["hopLimit"]->IsNumber() : true) && // hop limit should be a number
-           (json.find("from") != json.end()) && json["from"]->IsNumber() &&
-           (json["from"]->AsNumber() == nodeDB->getNodeNum()) &&            // only accept message if the "from" is us
-           (json.find("type") != json.end()) && json["type"]->IsString() && // should specify a type
-           (json.find("payload") != json.end());                            // should have a payload
-}
-
-bool MQTT::isPrivateIpAddress(const char address[])
-{
-    // Min. length like 10.0.0.0, max like 192.168.255.255
-    size_t length = strlen(address);
-    if (length < 8 || length > 15) {
-        return false;
+        if (map_position_precision == 0)
+            LOG_WARN("MQTT Map report enabled, but precision is 0");
+        if (localPosition.latitude_i == 0 && localPosition.longitude_i == 0)
+            LOG_WARN("MQTT Map report enabled, but no position available");
+        return;
     }
 
-    // Ensure the address contains only digits and dots.
-    // Even if it's not a valid IP address, we will know it's not a domain.
-    for (int i = 0; i < length; i++) {
-        if (!isdigit(address[i]) && address[i] != '.') {
-            return false;
-        }
+    // Allocate MeshPacket and fill it
+    meshtastic_MeshPacket *mp = packetPool.allocZeroed();
+    mp->which_payload_variant = meshtastic_MeshPacket_decoded_tag;
+    mp->from = nodeDB->getNodeNum();
+    mp->to = NODENUM_BROADCAST;
+    mp->decoded.portnum = meshtastic_PortNum_MAP_REPORT_APP;
+
+    // Fill MapReport message
+    meshtastic_MapReport mapReport = meshtastic_MapReport_init_default;
+    memcpy(mapReport.long_name, owner.long_name, sizeof(owner.long_name));
+    memcpy(mapReport.short_name, owner.short_name, sizeof(owner.short_name));
+    mapReport.role = config.device.role;
+    mapReport.hw_model = owner.hw_model;
+    strncpy(mapReport.firmware_version, optstr(APP_VERSION), sizeof(mapReport.firmware_version));
+    mapReport.region = config.lora.region;
+    mapReport.modem_preset = config.lora.modem_preset;
+    mapReport.has_default_channel = channels.hasDefaultChannel();
+
+    // Set position with precision (same as in PositionModule)
+    if (map_position_precision < 32 && map_position_precision > 0) {
+        mapReport.latitude_i = localPosition.latitude_i & (UINT32_MAX << (32 - map_position_precision));
+        mapReport.longitude_i = localPosition.longitude_i & (UINT32_MAX << (32 - map_position_precision));
+        mapReport.latitude_i += (1 << (31 - map_position_precision));
+        mapReport.longitude_i += (1 << (31 - map_position_precision));
+    } else {
+        mapReport.latitude_i = localPosition.latitude_i;
+        mapReport.longitude_i = localPosition.longitude_i;
     }
+    mapReport.altitude = localPosition.altitude;
+    mapReport.position_precision = map_position_precision;
 
-    // Check the easy ones first.
-    if (strcmp(address, "127.0.0.1") == 0 || strncmp(address, "10.", 3) == 0 || strncmp(address, "192.168", 7) == 0) {
-        return true;
-    }
+    mapReport.num_online_local_nodes = nodeDB->getNumOnlineMeshNodes(true);
 
-    // See if it's definitely not a 172 address.
-    if (strncmp(address, "172", 3) != 0) {
-        return false;
-    }
+    // Encode MapReport message into the MeshPacket
+    mp->decoded.payload.size =
+        pb_encode_to_bytes(mp->decoded.payload.bytes, sizeof(mp->decoded.payload.bytes), &meshtastic_MapReport_msg, &mapReport);
 
-    // We know it's a 172 address, now see if the second octet is 2 digits.
-    if (address[6] != '.') {
-        return false;
-    }
+    // Encode the MeshPacket into a binary ServiceEnvelope and publish
+    const meshtastic_ServiceEnvelope se = {
+        .packet = mp,
+        .channel_id = (char *)channels.getGlobalId(channels.getPrimaryIndex()), // Use primary channel as the channel_id
+        .gateway_id = owner.id};
+    size_t numBytes = pb_encode_to_bytes(bytes, sizeof(bytes), &meshtastic_ServiceEnvelope_msg, &se);
 
-    // Copy the second octet into a secondary buffer we can null-terminate and parse.
-    char octet2[3];
-    strncpy(octet2, address + 4, 2);
-    octet2[2] = 0;
+    LOG_INFO("MQTT Publish map report to %s", mapTopic.c_str());
+    publish(mapTopic.c_str(), bytes, numBytes, false);
 
-    int octet2Num = atoi(octet2);
-    return octet2Num >= 16 && octet2Num <= 31;
+    // Release the allocated memory for MeshPacket
+    packetPool.release(mp);
+
+    // Update the last report time
+    last_report_to_map = millis();
 }
\ No newline at end of file
diff --git a/src/mqtt/MQTT.h b/src/mqtt/MQTT.h
index fcefb94a2..cb1fffcc9 100644
--- a/src/mqtt/MQTT.h
+++ b/src/mqtt/MQTT.h
@@ -5,7 +5,9 @@
 #include "concurrency/OSThread.h"
 #include "mesh/Channels.h"
 #include "mesh/generated/meshtastic/mqtt.pb.h"
+#if !defined(ARCH_NRF52) || NRF52_USE_JSON
 #include "serialization/JSON.h"
+#endif
 #if HAS_WIFI
 #include 
 #if !defined(ARCH_PORTDUINO)
@@ -35,7 +37,7 @@ class MQTT : private concurrency::OSThread
 #if HAS_WIFI
     WiFiClient mqttClient;
 #if !defined(ARCH_PORTDUINO)
-#if defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR < 3
+#if (defined(ESP_ARDUINO_VERSION_MAJOR) && ESP_ARDUINO_VERSION_MAJOR < 3) || defined(RPI_PICO)
     WiFiClientSecure wifiSecureClient;
 #endif
 #endif
@@ -77,10 +79,17 @@ class MQTT : private concurrency::OSThread
 
     void start() { setIntervalFromNow(0); };
 
+    bool isUsingDefaultServer() { return isConfiguredForDefaultServer; }
+
   protected:
-    PointerQueue mqttQueue;
+    struct QueueEntry {
+        std::string topic;
+        std::basic_string envBytes; // binary/pb_encode_to_bytes ServiceEnvelope
+    };
+    PointerQueue mqttQueue;
 
     int reconnectCount = 0;
+    bool isConfiguredForDefaultServer = true;
 
     virtual int32_t runOnce() override;
 
@@ -117,13 +126,6 @@ class MQTT : private concurrency::OSThread
     // Check if we should report unencrypted information about our node for consumption by a map
     void perhapsReportToMap();
 
-    // returns true if this is a valid JSON envelope which we accept on downlink
-    bool isValidJsonEnvelope(JSONObject &json);
-
-    /// Determines if the given address is a private IPv4 address, i.e. not routable on the public internet.
-    /// These are the ranges: 127.0.0.1, 10.0.0.0-10.255.255.255, 172.16.0.0-172.31.255.255, 192.168.0.0-192.168.255.255.
-    bool isPrivateIpAddress(const char address[]);
-
     /// Return 0 if sleep is okay, veto sleep if we are connected to pubsub server
     // int preflightSleepCb(void *unused = NULL) { return pubSub.connected() ? 1 : 0; }
 };
diff --git a/src/nimble/NimbleBluetooth.cpp b/src/nimble/NimbleBluetooth.cpp
index 933d05dd1..2662ef0bc 100644
--- a/src/nimble/NimbleBluetooth.cpp
+++ b/src/nimble/NimbleBluetooth.cpp
@@ -59,7 +59,7 @@ class NimbleBluetoothToRadioCallback : public NimBLECharacteristicCallbacks
             memcpy(lastToRadio, val.data(), val.length());
             bluetoothPhoneAPI->handleToRadio(val.data(), val.length());
         } else {
-            LOG_DEBUG("Dropping duplicate ToRadio packet we just saw");
+            LOG_DEBUG("Drop dup ToRadio packet we just saw");
         }
     }
 };
@@ -84,7 +84,7 @@ class NimbleBluetoothServerCallback : public NimBLEServerCallbacks
         uint32_t passkey = config.bluetooth.fixed_pin;
 
         if (config.bluetooth.mode == meshtastic_Config_BluetoothConfig_PairingMode_RANDOM_PIN) {
-            LOG_INFO("Using random passkey");
+            LOG_INFO("Use random passkey");
             // This is the passkey to be entered on peer - we pick a number >100,000 to ensure 6 digits
             passkey = random(100000, 999999);
         }
@@ -193,7 +193,7 @@ void NimbleBluetooth::setup()
     // Uncomment for testing
     // NimbleBluetooth::clearBonds();
 
-    LOG_INFO("Initialise the NimBLE bluetooth module");
+    LOG_INFO("Init the NimBLE bluetooth module");
 
     NimBLEDevice::init(getDeviceName());
     NimBLEDevice::setPower(ESP_PWR_LVL_P9);
diff --git a/src/platform/esp32/architecture.h b/src/platform/esp32/architecture.h
index cac45e48e..d209436b0 100644
--- a/src/platform/esp32/architecture.h
+++ b/src/platform/esp32/architecture.h
@@ -172,12 +172,12 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_VISION_MASTER_E213
 #elif defined(HELTEC_VISION_MASTER_E290)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_VISION_MASTER_E290
-#elif defined(HELTEC_MESH_NODE_T114)
-#define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_NODE_T114
 #elif defined(SENSECAP_INDICATOR)
 #define HW_VENDOR meshtastic_HardwareModel_SENSECAP_INDICATOR
 #elif defined(SEEED_XIAO_S3)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_XIAO_S3
+#elif defined(MESH_TAB)
+#define HW_VENDOR meshtastic_HardwareModel_MESH_TAB
 #endif
 
 // -----------------------------------------------------------------------------
diff --git a/src/platform/esp32/main-esp32.cpp b/src/platform/esp32/main-esp32.cpp
index 033801d77..679222af5 100644
--- a/src/platform/esp32/main-esp32.cpp
+++ b/src/platform/esp32/main-esp32.cpp
@@ -51,7 +51,11 @@ void updateBatteryLevel(uint8_t level) {}
 
 void getMacAddr(uint8_t *dmac)
 {
+#if defined(CONFIG_IDF_TARGET_ESP32C6) && defined(CONFIG_SOC_IEEE802154_SUPPORTED)
+    assert(esp_base_mac_addr_get(dmac) == ESP_OK);
+#else
     assert(esp_efuse_mac_get_default(dmac) == ESP_OK);
+#endif
 }
 
 #ifdef HAS_32768HZ
@@ -79,7 +83,7 @@ void enableSlowCLK()
         LOG_DEBUG("32K XTAL OSC has not started up");
     } else {
         rtc_clk_slow_freq_set(RTC_SLOW_FREQ_32K_XTAL);
-        LOG_DEBUG("Switching RTC Source to 32.768Khz succeeded, using 32K XTAL");
+        LOG_DEBUG("Switch RTC Source to 32.768Khz succeeded, using 32K XTAL");
         CALIBRATE_ONE(RTC_CAL_RTC_MUX);
         CALIBRATE_ONE(RTC_CAL_32K_XTAL);
     }
@@ -97,7 +101,7 @@ void esp32Setup()
     /* We explicitly don't want to do call randomSeed,
     // as that triggers the esp32 core to use a less secure pseudorandom function.
     uint32_t seed = esp_random();
-    LOG_DEBUG("Setting random seed %u", seed);
+    LOG_DEBUG("Set random seed %u", seed);
     randomSeed(seed);
     */
 
@@ -166,26 +170,6 @@ void esp32Setup()
 #endif
 }
 
-#if 0
-// Turn off for now
-
-uint32_t axpDebugRead()
-{
-  axp.debugCharging();
-  LOG_DEBUG("vbus current %f", axp.getVbusCurrent());
-  LOG_DEBUG("charge current %f", axp.getBattChargeCurrent());
-  LOG_DEBUG("bat voltage %f", axp.getBattVoltage());
-  LOG_DEBUG("batt pct %d", axp.getBattPercentage());
-  LOG_DEBUG("is battery connected %d", axp.isBatteryConnect());
-  LOG_DEBUG("is USB connected %d", axp.isVBUSPlug());
-  LOG_DEBUG("is charging %d", axp.isChargeing());
-
-  return 30 * 1000;
-}
-
-Periodic axpDebugOutput(axpDebugRead);
-#endif
-
 /// loop code specific to ESP32 targets
 void esp32Loop()
 {
@@ -263,4 +247,4 @@ void cpuDeepSleep(uint32_t msecToWake)
 
     esp_sleep_enable_timer_wakeup(msecToWake * 1000ULL); // call expects usecs
     esp_deep_sleep_start();                              // TBD mA sleep current (battery)
-}
\ No newline at end of file
+}
diff --git a/src/platform/nrf52/NRF52Bluetooth.cpp b/src/platform/nrf52/NRF52Bluetooth.cpp
index 932624880..31bbc7fa9 100644
--- a/src/platform/nrf52/NRF52Bluetooth.cpp
+++ b/src/platform/nrf52/NRF52Bluetooth.cpp
@@ -137,7 +137,7 @@ void onFromRadioAuthorize(uint16_t conn_hdl, BLECharacteristic *chr, ble_gatts_e
         // or make empty if the queue is empty
         fromRadio.write(fromRadioBytes, numBytes);
     } else {
-        // LOG_INFO("Ignoring successor read");
+        // LOG_INFO("Ignore successor read");
     }
     authorizeRead(conn_hdl);
 }
@@ -152,7 +152,7 @@ void onToRadioWrite(uint16_t conn_hdl, BLECharacteristic *chr, uint8_t *data, ui
         memcpy(lastToRadio, data, len);
         bluetoothPhoneAPI->handleToRadio(data, len);
     } else {
-        LOG_DEBUG("Dropping duplicate ToRadio packet we just saw");
+        LOG_DEBUG("Drop dup ToRadio packet we just saw");
     }
 }
 
@@ -225,7 +225,7 @@ void NRF52Bluetooth::startDisabled()
     // Shutdown bluetooth for minimum power draw
     Bluefruit.Advertising.stop();
     Bluefruit.setTxPower(-40); // Minimum power
-    LOG_INFO("Disabling NRF52 Bluetooth. (Workaround: tx power min, advertising stopped)");
+    LOG_INFO("Disable NRF52 Bluetooth. (Workaround: tx power min, advertise stopped)");
 }
 bool NRF52Bluetooth::isConnected()
 {
@@ -238,7 +238,7 @@ int NRF52Bluetooth::getRssi()
 void NRF52Bluetooth::setup()
 {
     // Initialise the Bluefruit module
-    LOG_INFO("Initialize the Bluefruit nRF52 module");
+    LOG_INFO("Init the Bluefruit nRF52 module");
     Bluefruit.autoConnLed(false);
     Bluefruit.configPrphBandwidth(BANDWIDTH_MAX);
     Bluefruit.begin();
@@ -275,22 +275,22 @@ void NRF52Bluetooth::setup()
     bledfusecure.begin();                                                     // Install the DFU helper
 #endif
     // Configure and Start the Device Information Service
-    LOG_INFO("Configuring the Device Information Service");
+    LOG_INFO("Init the Device Information Service");
     bledis.setModel(optstr(HW_VERSION));
     bledis.setFirmwareRev(optstr(APP_VERSION));
     bledis.begin();
     // Start the BLE Battery Service and set it to 100%
-    LOG_INFO("Configuring the Battery Service");
+    LOG_INFO("Init the Battery Service");
     blebas.begin();
     blebas.write(0); // Unknown battery level for now
     // Setup the Heart Rate Monitor service using
     // BLEService and BLECharacteristic classes
-    LOG_INFO("Configuring the Mesh bluetooth service");
+    LOG_INFO("Init the Mesh bluetooth service");
     setupMeshService();
     // Setup the advertising packet(s)
-    LOG_INFO("Setting up the advertising payload(s)");
+    LOG_INFO("Set up the advertising payload(s)");
     startAdv();
-    LOG_INFO("Advertising");
+    LOG_INFO("Advertise");
 }
 void NRF52Bluetooth::resumeAdvertising()
 {
@@ -306,7 +306,7 @@ void updateBatteryLevel(uint8_t level)
 }
 void NRF52Bluetooth::clearBonds()
 {
-    LOG_INFO("Clearing bluetooth bonds!");
+    LOG_INFO("Clear bluetooth bonds!");
     bond_print_list(BLE_GAP_ROLE_PERIPH);
     bond_print_list(BLE_GAP_ROLE_CENTRAL);
     Bluefruit.Periph.clearBonds();
@@ -318,7 +318,7 @@ void NRF52Bluetooth::onConnectionSecured(uint16_t conn_handle)
 }
 bool NRF52Bluetooth::onPairingPasskey(uint16_t conn_handle, uint8_t const passkey[6], bool match_request)
 {
-    LOG_INFO("BLE pairing process started with passkey %.3s %.3s", passkey, passkey + 3);
+    LOG_INFO("BLE pair process started with passkey %.3s %.3s", passkey, passkey + 3);
     powerFSM.trigger(EVENT_BLUETOOTH_PAIR);
 #if !defined(MESHTASTIC_EXCLUDE_SCREEN)
     screen->startAlert([](OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y) -> void {
@@ -354,15 +354,15 @@ bool NRF52Bluetooth::onPairingPasskey(uint16_t conn_handle, uint8_t const passke
                 break;
         }
     }
-    LOG_INFO("BLE passkey pairing: match_request=%i", match_request);
+    LOG_INFO("BLE passkey pair: match_request=%i", match_request);
     return true;
 }
 void NRF52Bluetooth::onPairingCompleted(uint16_t conn_handle, uint8_t auth_status)
 {
     if (auth_status == BLE_GAP_SEC_STATUS_SUCCESS)
-        LOG_INFO("BLE pairing success");
+        LOG_INFO("BLE pair success");
     else
-        LOG_INFO("BLE pairing failed");
+        LOG_INFO("BLE pair failed");
     screen->endAlert();
 }
 
diff --git a/src/platform/nrf52/architecture.h b/src/platform/nrf52/architecture.h
index b2b7b5a20..ce99244ba 100644
--- a/src/platform/nrf52/architecture.h
+++ b/src/platform/nrf52/architecture.h
@@ -47,6 +47,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_PPR
 #elif defined(RAK2560)
 #define HW_VENDOR meshtastic_HardwareModel_RAK2560
+#elif defined(WISMESH_TAP)
+#define HW_VENDOR meshtastic_HardwareModel_WISMESH_TAP
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
 #elif defined(TTGO_T_ECHO)
diff --git a/src/platform/nrf52/main-nrf52.cpp b/src/platform/nrf52/main-nrf52.cpp
index 72a223c44..7ca047654 100644
--- a/src/platform/nrf52/main-nrf52.cpp
+++ b/src/platform/nrf52/main-nrf52.cpp
@@ -74,7 +74,7 @@ void setBluetoothEnable(bool enable)
     // For debugging use: don't use bluetooth
     if (!useSoftDevice) {
         if (enable)
-            LOG_INFO("DISABLING NRF52 BLUETOOTH WHILE DEBUGGING");
+            LOG_INFO("Disable NRF52 BLUETOOTH WHILE DEBUGGING");
         return;
     }
 
@@ -97,7 +97,7 @@ void setBluetoothEnable(bool enable)
 
         // If not yet set-up
         if (!nrf52Bluetooth) {
-            LOG_DEBUG("Initializing NRF52 Bluetooth");
+            LOG_DEBUG("Init NRF52 Bluetooth");
             nrf52Bluetooth = new NRF52Bluetooth();
             nrf52Bluetooth->setup();
 
@@ -212,7 +212,7 @@ void nrf52Setup()
     } seed;
     nRFCrypto.begin();
     nRFCrypto.Random.generate(seed.seed8, sizeof(seed.seed8));
-    LOG_DEBUG("Setting random seed %u", seed.seed32);
+    LOG_DEBUG("Set random seed %u", seed.seed32);
     randomSeed(seed.seed32);
     nRFCrypto.end();
 }
@@ -309,4 +309,4 @@ void enterDfuMode()
 #else
     enterUf2Dfu();
 #endif
-}
\ No newline at end of file
+}
diff --git a/src/platform/portduino/PortduinoGlue.cpp b/src/platform/portduino/PortduinoGlue.cpp
index e56016a5b..0c981bf16 100644
--- a/src/platform/portduino/PortduinoGlue.cpp
+++ b/src/platform/portduino/PortduinoGlue.cpp
@@ -5,20 +5,30 @@
 #include "sleep.h"
 #include "target_specific.h"
 
+#include "PortduinoGlue.h"
+#include "api/ServerAPI.h"
+#include "linux/gpio/LinuxGPIOPin.h"
+#include "meshUtils.h"
+#include "yaml-cpp/yaml.h"
 #include 
 #include 
-
-#include "PortduinoGlue.h"
-#include "linux/gpio/LinuxGPIOPin.h"
-#include "yaml-cpp/yaml.h"
+#include 
+#include 
+#include 
+#include 
 #include 
 #include 
+#include 
 #include 
 
+#include "platform/portduino/USBHal.h"
+
 std::map settingsMap;
 std::map settingsStrings;
 std::ofstream traceFile;
+Ch341Hal *ch341Hal = nullptr;
 char *configPath = nullptr;
+char *optionMac = nullptr;
 
 // FIXME - move setBluetoothEnable into a HALPlatform class
 void setBluetoothEnable(bool enable)
@@ -33,7 +43,7 @@ void cpuDeepSleep(uint32_t msecs)
 
 void updateBatteryLevel(uint8_t level) NOT_IMPLEMENTED("updateBatteryLevel");
 
-int TCPPort = 4403;
+int TCPPort = SERVER_API_DEFAULT_PORT;
 
 static error_t parse_opt(int key, char *arg, struct argp_state *state)
 {
@@ -47,6 +57,10 @@ static error_t parse_opt(int key, char *arg, struct argp_state *state)
     case 'c':
         configPath = arg;
         break;
+    case 'h':
+        optionMac = arg;
+        break;
+
     case ARGP_KEY_ARG:
         return 0;
     default:
@@ -59,6 +73,7 @@ void portduinoCustomInit()
 {
     static struct argp_option options[] = {{"port", 'p', "PORT", 0, "The TCP port to use."},
                                            {"config", 'c', "CONFIG_PATH", 0, "Full path of the .yaml config file to use."},
+                                           {"hwid", 'h', "HWID", 0, "The mac address to assign to this virtual machine"},
                                            {0}};
     static void *childArguments;
     static char doc[] = "Meshtastic native build.";
@@ -68,13 +83,56 @@ void portduinoCustomInit()
     portduinoAddArguments(child, childArguments);
 }
 
+void getMacAddr(uint8_t *dmac)
+{
+    // We should store this value, and short-circuit all this if it's already been set.
+    if (optionMac != nullptr && strlen(optionMac) > 0) {
+        if (strlen(optionMac) >= 12) {
+            MAC_from_string(optionMac, dmac);
+        } else {
+            uint32_t hwId = {0};
+            sscanf(optionMac, "%u", &hwId);
+            dmac[0] = 0x80;
+            dmac[1] = 0;
+            dmac[2] = hwId >> 24;
+            dmac[3] = hwId >> 16;
+            dmac[4] = hwId >> 8;
+            dmac[5] = hwId & 0xff;
+        }
+    } else if (settingsStrings[mac_address].length() > 11) {
+        MAC_from_string(settingsStrings[mac_address], dmac);
+        exit;
+    } else {
+
+        struct hci_dev_info di = {0};
+        di.dev_id = 0;
+        bdaddr_t bdaddr;
+        int btsock;
+        btsock = socket(AF_BLUETOOTH, SOCK_RAW, 1);
+        if (btsock < 0) { // If anything fails, just return with the default value
+            return;
+        }
+
+        if (ioctl(btsock, HCIGETDEVINFO, (void *)&di)) {
+            return;
+        }
+
+        dmac[0] = di.bdaddr.b[5];
+        dmac[1] = di.bdaddr.b[4];
+        dmac[2] = di.bdaddr.b[3];
+        dmac[3] = di.bdaddr.b[2];
+        dmac[4] = di.bdaddr.b[1];
+        dmac[5] = di.bdaddr.b[0];
+    }
+}
+
 /** apps run under portduino can optionally define a portduinoSetup() to
  * use portduino specific init code (such as gpioBind) to setup portduino on their host machine,
  * before running 'arduino' code.
  */
 void portduinoSetup()
 {
-    printf("Setting up Meshtastic on Portduino...\n");
+    printf("Set up Meshtastic on Portduino...\n");
     int max_GPIO = 0;
     const configNames GPIO_lines[] = {cs,
                                       irq,
@@ -95,36 +153,36 @@ void portduinoSetup()
     std::string gpioChipName = "gpiochip";
     settingsStrings[i2cdev] = "";
     settingsStrings[keyboardDevice] = "";
+    settingsStrings[pointerDevice] = "";
     settingsStrings[webserverrootpath] = "";
     settingsStrings[spidev] = "";
     settingsStrings[displayspidev] = "";
     settingsMap[spiSpeed] = 2000000;
     settingsMap[ascii_logs] = !isatty(1);
+    settingsMap[displayPanel] = no_screen;
+    settingsMap[touchscreenModule] = no_touchscreen;
 
     YAML::Node yamlConfig;
 
     if (configPath != nullptr) {
-        std::cout << "Using " << configPath << " as config file" << std::endl;
-        try {
-            yamlConfig = YAML::LoadFile(configPath);
-        } catch (YAML::Exception &e) {
-            std::cout << "Could not open " << configPath << " because of error: " << e.what() << std::endl;
+        if (loadConfig(configPath)) {
+            std::cout << "Using " << configPath << " as config file" << std::endl;
+        } else {
+            std::cout << "Unable to use " << configPath << " as config file" << std::endl;
             exit(EXIT_FAILURE);
         }
     } else if (access("config.yaml", R_OK) == 0) {
-        std::cout << "Using local config.yaml as config file" << std::endl;
-        try {
-            yamlConfig = YAML::LoadFile("config.yaml");
-        } catch (YAML::Exception &e) {
-            std::cout << "*** Exception " << e.what() << std::endl;
+        if (loadConfig("config.yaml")) {
+            std::cout << "Using local config.yaml as config file" << std::endl;
+        } else {
+            std::cout << "Unable to use local config.yaml as config file" << std::endl;
             exit(EXIT_FAILURE);
         }
     } else if (access("/etc/meshtasticd/config.yaml", R_OK) == 0) {
-        std::cout << "Using /etc/meshtasticd/config.yaml as config file" << std::endl;
-        try {
-            yamlConfig = YAML::LoadFile("/etc/meshtasticd/config.yaml");
-        } catch (YAML::Exception &e) {
-            std::cout << "*** Exception " << e.what() << std::endl;
+        if (loadConfig("/etc/meshtasticd/config.yaml")) {
+            std::cout << "Using /etc/meshtasticd/config.yaml as config file" << std::endl;
+        } else {
+            std::cout << "Unable to use /etc/meshtasticd/config.yaml as config file" << std::endl;
             exit(EXIT_FAILURE);
         }
     } else {
@@ -136,10 +194,166 @@ void portduinoSetup()
         return;
     }
 
+    if (settingsStrings[config_directory] != "") {
+        std::string filetype = ".yaml";
+        for (const std::filesystem::directory_entry &entry :
+             std::filesystem::directory_iterator{settingsStrings[config_directory]}) {
+            if (ends_with(entry.path().string(), ".yaml")) {
+                std::cout << "Also using " << entry << " as additional config file" << std::endl;
+                loadConfig(entry.path().c_str());
+            }
+        }
+    }
+    // if we're using a usermode driver, we need to initialize it here, to get a serial number back for mac address
+    uint8_t dmac[6] = {0};
+    if (settingsStrings[spidev] == "ch341") {
+        ch341Hal = new Ch341Hal(0);
+        if (settingsStrings[lora_usb_serial_num] != "") {
+            ch341Hal->serial = settingsStrings[lora_usb_serial_num];
+        }
+        ch341Hal->vid = settingsMap[lora_usb_vid];
+        ch341Hal->pid = settingsMap[lora_usb_pid];
+        ch341Hal->init();
+        if (!ch341Hal->isInit()) {
+            std::cout << "Could not initialize CH341 device!" << std::endl;
+            exit(EXIT_FAILURE);
+        }
+        char serial[9] = {0};
+        ch341Hal->getSerialString(serial, 8);
+        std::cout << "Serial " << serial << std::endl;
+        if (strlen(serial) == 8 && settingsStrings[mac_address].length() < 12) {
+            uint8_t hash[32] = {0};
+            memcpy(hash, serial, 8);
+            crypto->hash(hash, 8);
+            dmac[0] = (hash[0] << 4) | 2;
+            dmac[1] = hash[1];
+            dmac[2] = hash[2];
+            dmac[3] = hash[3];
+            dmac[4] = hash[4];
+            dmac[5] = hash[5];
+        }
+    }
+
+    getMacAddr(dmac);
+    if (dmac[0] == 0 && dmac[1] == 0 && dmac[2] == 0 && dmac[3] == 0 && dmac[4] == 0 && dmac[5] == 0) {
+        std::cout << "*** Blank MAC Address not allowed!" << std::endl;
+        std::cout << "Please set a MAC Address in config.yaml using either MACAddress or MACAddressSource." << std::endl;
+        exit(EXIT_FAILURE);
+    }
+    std::cout << "MAC Address: " << std::hex << +dmac[0] << +dmac[1] << +dmac[2] << +dmac[3] << +dmac[4] << +dmac[5] << std::endl;
     // Rather important to set this, if not running simulated.
     randomSeed(time(NULL));
 
+    gpioChipName += std::to_string(settingsMap[gpiochip]);
+
+    for (configNames i : GPIO_lines) {
+        if (settingsMap.count(i) && settingsMap[i] > max_GPIO)
+            max_GPIO = settingsMap[i];
+    }
+
+    gpioInit(max_GPIO + 1); // Done here so we can inform Portduino how many GPIOs we need.
+
+    // Need to bind all the configured GPIO pins so they're not simulated
+    // TODO: Can we do this in the for loop above?
+    // TODO: If one of these fails, we should log and terminate
+    if (settingsMap.count(user) > 0 && settingsMap[user] != RADIOLIB_NC) {
+        if (initGPIOPin(settingsMap[user], gpioChipName) != ERRNO_OK) {
+            settingsMap[user] = RADIOLIB_NC;
+        }
+    }
+    if (settingsMap[displayPanel] != no_screen) {
+        if (settingsMap[displayCS] > 0)
+            initGPIOPin(settingsMap[displayCS], gpioChipName);
+        if (settingsMap[displayDC] > 0)
+            initGPIOPin(settingsMap[displayDC], gpioChipName);
+        if (settingsMap[displayBacklight] > 0)
+            initGPIOPin(settingsMap[displayBacklight], gpioChipName);
+        if (settingsMap[displayReset] > 0)
+            initGPIOPin(settingsMap[displayReset], gpioChipName);
+    }
+    if (settingsMap[touchscreenModule] != no_touchscreen) {
+        if (settingsMap[touchscreenCS] > 0)
+            initGPIOPin(settingsMap[touchscreenCS], gpioChipName);
+        if (settingsMap[touchscreenIRQ] > 0)
+            initGPIOPin(settingsMap[touchscreenIRQ], gpioChipName);
+    }
+
+    // Only initialize the radio pins when dealing with real, kernel controlled SPI hardware
+    if (settingsStrings[spidev] != "" && settingsStrings[spidev] != "ch341") {
+        if (settingsMap.count(cs) > 0 && settingsMap[cs] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[cs], gpioChipName) != ERRNO_OK) {
+                settingsMap[cs] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(irq) > 0 && settingsMap[irq] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[irq], gpioChipName) != ERRNO_OK) {
+                settingsMap[irq] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(busy) > 0 && settingsMap[busy] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[busy], gpioChipName) != ERRNO_OK) {
+                settingsMap[busy] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(reset) > 0 && settingsMap[reset] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[reset], gpioChipName) != ERRNO_OK) {
+                settingsMap[reset] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(sx126x_ant_sw) > 0 && settingsMap[sx126x_ant_sw] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[sx126x_ant_sw], gpioChipName) != ERRNO_OK) {
+                settingsMap[sx126x_ant_sw] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(rxen) > 0 && settingsMap[rxen] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[rxen], gpioChipName) != ERRNO_OK) {
+                settingsMap[rxen] = RADIOLIB_NC;
+            }
+        }
+        if (settingsMap.count(txen) > 0 && settingsMap[txen] != RADIOLIB_NC) {
+            if (initGPIOPin(settingsMap[txen], gpioChipName) != ERRNO_OK) {
+                settingsMap[txen] = RADIOLIB_NC;
+            }
+        }
+        SPI.begin(settingsStrings[spidev].c_str());
+    }
+    if (settingsStrings[traceFilename] != "") {
+        try {
+            traceFile.open(settingsStrings[traceFilename], std::ios::out | std::ios::app);
+        } catch (std::ofstream::failure &e) {
+            std::cout << "*** traceFile Exception " << e.what() << std::endl;
+            exit(EXIT_FAILURE);
+        }
+    }
+
+    return;
+}
+
+int initGPIOPin(int pinNum, const std::string gpioChipName)
+{
+#ifdef PORTDUINO_LINUX_HARDWARE
+    std::string gpio_name = "GPIO" + std::to_string(pinNum);
     try {
+        GPIOPin *csPin;
+        csPin = new LinuxGPIOPin(pinNum, gpioChipName.c_str(), pinNum, gpio_name.c_str());
+        csPin->setSilent();
+        gpioBind(csPin);
+        return ERRNO_OK;
+    } catch (...) {
+        std::exception_ptr p = std::current_exception();
+        std::cout << "Warning, cannot claim pin " << gpio_name << (p ? p.__cxa_exception_type()->name() : "null") << std::endl;
+        return ERRNO_DISABLED;
+    }
+#else
+    return ERRNO_OK;
+#endif
+}
+
+bool loadConfig(const char *configPath)
+{
+    YAML::Node yamlConfig;
+    try {
+        yamlConfig = YAML::LoadFile(configPath);
         if (yamlConfig["Logging"]) {
             if (yamlConfig["Logging"]["LogLevel"].as("info") == "trace") {
                 settingsMap[logoutputlevel] = level_trace;
@@ -162,6 +376,9 @@ void portduinoSetup()
             settingsMap[use_sx1262] = false;
             settingsMap[use_rf95] = false;
             settingsMap[use_sx1280] = false;
+            settingsMap[use_lr1110] = false;
+            settingsMap[use_lr1120] = false;
+            settingsMap[use_lr1121] = false;
             settingsMap[use_sx1268] = false;
 
             if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "sx1262") {
@@ -170,11 +387,20 @@ void portduinoSetup()
                 settingsMap[use_rf95] = true;
             } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "sx1280") {
                 settingsMap[use_sx1280] = true;
+            } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "lr1110") {
+                settingsMap[use_lr1110] = true;
+            } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "lr1120") {
+                settingsMap[use_lr1120] = true;
+            } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "lr1121") {
+                settingsMap[use_lr1121] = true;
             } else if (yamlConfig["Lora"]["Module"] && yamlConfig["Lora"]["Module"].as("") == "sx1268") {
                 settingsMap[use_sx1268] = true;
             }
             settingsMap[dio2_as_rf_switch] = yamlConfig["Lora"]["DIO2_AS_RF_SWITCH"].as(false);
-            settingsMap[dio3_tcxo_voltage] = yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as(false);
+            settingsMap[dio3_tcxo_voltage] = yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as(0) * 1000;
+            if (settingsMap[dio3_tcxo_voltage] == 0 && yamlConfig["Lora"]["DIO3_TCXO_VOLTAGE"].as(false)) {
+                settingsMap[dio3_tcxo_voltage] = 1800; // default millivolts for "true"
+            }
             settingsMap[cs] = yamlConfig["Lora"]["CS"].as(RADIOLIB_NC);
             settingsMap[irq] = yamlConfig["Lora"]["IRQ"].as(RADIOLIB_NC);
             settingsMap[busy] = yamlConfig["Lora"]["Busy"].as(RADIOLIB_NC);
@@ -183,18 +409,24 @@ void portduinoSetup()
             settingsMap[rxen] = yamlConfig["Lora"]["RXen"].as(RADIOLIB_NC);
             settingsMap[sx126x_ant_sw] = yamlConfig["Lora"]["SX126X_ANT_SW"].as(RADIOLIB_NC);
             settingsMap[gpiochip] = yamlConfig["Lora"]["gpiochip"].as(0);
-            settingsMap[ch341Quirk] = yamlConfig["Lora"]["ch341_quirk"].as(false);
             settingsMap[spiSpeed] = yamlConfig["Lora"]["spiSpeed"].as(2000000);
-            gpioChipName += std::to_string(settingsMap[gpiochip]);
+            settingsStrings[lora_usb_serial_num] = yamlConfig["Lora"]["USB_Serialnum"].as("");
+            settingsMap[lora_usb_pid] = yamlConfig["Lora"]["USB_PID"].as(0x5512);
+            settingsMap[lora_usb_vid] = yamlConfig["Lora"]["USB_VID"].as(0x1A86);
 
-            settingsStrings[spidev] = "/dev/" + yamlConfig["Lora"]["spidev"].as("spidev0.0");
-            if (settingsStrings[spidev].length() == 14) {
-                int x = settingsStrings[spidev].at(11) - '0';
-                int y = settingsStrings[spidev].at(13) - '0';
-                if (x >= 0 && x < 10 && y >= 0 && y < 10) {
-                    settingsMap[spidev] = x + y << 4;
-                    settingsMap[displayspidev] = settingsMap[spidev];
-                    settingsMap[touchscreenspidev] = settingsMap[spidev];
+            settingsStrings[spidev] = yamlConfig["Lora"]["spidev"].as("spidev0.0");
+            if (settingsStrings[spidev] != "ch341") {
+                settingsStrings[spidev] = "/dev/" + settingsStrings[spidev];
+                if (settingsStrings[spidev].length() == 14) {
+                    int x = settingsStrings[spidev].at(11) - '0';
+                    int y = settingsStrings[spidev].at(13) - '0';
+                    // Pretty sure this is always true
+                    if (x >= 0 && x < 10 && y >= 0 && y < 10) {
+                        // I believe this bit of weirdness is specifically for the new GUI
+                        settingsMap[spidev] = x + y << 4;
+                        settingsMap[displayspidev] = settingsMap[spidev];
+                        settingsMap[touchscreenspidev] = settingsMap[spidev];
+                    }
                 }
             }
         }
@@ -211,7 +443,6 @@ void portduinoSetup()
         if (yamlConfig["I2C"]) {
             settingsStrings[i2cdev] = yamlConfig["I2C"]["I2CDevice"].as("");
         }
-        settingsMap[displayPanel] = no_screen;
         if (yamlConfig["Display"]) {
             if (yamlConfig["Display"]["Panel"].as("") == "ST7789")
                 settingsMap[displayPanel] = st7789;
@@ -225,6 +456,8 @@ void portduinoSetup()
                 settingsMap[displayPanel] = ili9341;
             else if (yamlConfig["Display"]["Panel"].as("") == "ILI9342")
                 settingsMap[displayPanel] = ili9342;
+            else if (yamlConfig["Display"]["Panel"].as("") == "ILI9486")
+                settingsMap[displayPanel] = ili9486;
             else if (yamlConfig["Display"]["Panel"].as("") == "ILI9488")
                 settingsMap[displayPanel] = ili9488;
             else if (yamlConfig["Display"]["Panel"].as("") == "HX8357D")
@@ -258,7 +491,6 @@ void portduinoSetup()
                 }
             }
         }
-        settingsMap[touchscreenModule] = no_touchscreen;
         if (yamlConfig["Touchscreen"]) {
             if (yamlConfig["Touchscreen"]["Module"].as("") == "XPT2046")
                 settingsMap[touchscreenModule] = xpt2046;
@@ -286,6 +518,7 @@ void portduinoSetup()
         }
         if (yamlConfig["Input"]) {
             settingsStrings[keyboardDevice] = (yamlConfig["Input"]["KeyboardDevice"]).as("");
+            settingsStrings[pointerDevice] = (yamlConfig["Input"]["PointerDevice"]).as("");
         }
 
         if (yamlConfig["Webserver"]) {
@@ -293,113 +526,52 @@ void portduinoSetup()
             settingsStrings[webserverrootpath] = (yamlConfig["Webserver"]["RootPath"]).as("");
         }
 
-        settingsMap[maxnodes] = (yamlConfig["General"]["MaxNodes"]).as(200);
-        settingsMap[maxtophone] = (yamlConfig["General"]["MaxMessageQueue"]).as(100);
+        if (yamlConfig["General"]) {
+            settingsMap[maxnodes] = (yamlConfig["General"]["MaxNodes"]).as(200);
+            settingsMap[maxtophone] = (yamlConfig["General"]["MaxMessageQueue"]).as(100);
+            settingsStrings[config_directory] = (yamlConfig["General"]["ConfigDirectory"]).as("");
+            if ((yamlConfig["General"]["MACAddress"]).as("") != "" &&
+                (yamlConfig["General"]["MACAddressSource"]).as("") != "") {
+                std::cout << "Cannot set both MACAddress and MACAddressSource!" << std::endl;
+                exit(EXIT_FAILURE);
+            }
+            settingsStrings[mac_address] = (yamlConfig["General"]["MACAddress"]).as("");
+            if ((yamlConfig["General"]["MACAddressSource"]).as("") != "") {
+                std::ifstream infile("/sys/class/net/" + (yamlConfig["General"]["MACAddressSource"]).as("") +
+                                     "/address");
+                std::getline(infile, settingsStrings[mac_address]);
+            }
 
+            // https://stackoverflow.com/a/20326454
+            settingsStrings[mac_address].erase(
+                std::remove(settingsStrings[mac_address].begin(), settingsStrings[mac_address].end(), ':'),
+                settingsStrings[mac_address].end());
+        }
     } catch (YAML::Exception &e) {
         std::cout << "*** Exception " << e.what() << std::endl;
-        exit(EXIT_FAILURE);
+        return false;
     }
-
-    for (configNames i : GPIO_lines) {
-        if (settingsMap.count(i) && settingsMap[i] > max_GPIO)
-            max_GPIO = settingsMap[i];
-    }
-
-    gpioInit(max_GPIO + 1); // Done here so we can inform Portduino how many GPIOs we need.
-
-    // Need to bind all the configured GPIO pins so they're not simulated
-    // TODO: Can we do this in the for loop above?
-    // TODO: If one of these fails, we should log and terminate
-    if (settingsMap.count(cs) > 0 && settingsMap[cs] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[cs], gpioChipName) != ERRNO_OK) {
-            settingsMap[cs] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(irq) > 0 && settingsMap[irq] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[irq], gpioChipName) != ERRNO_OK) {
-            settingsMap[irq] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(busy) > 0 && settingsMap[busy] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[busy], gpioChipName) != ERRNO_OK) {
-            settingsMap[busy] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(reset) > 0 && settingsMap[reset] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[reset], gpioChipName) != ERRNO_OK) {
-            settingsMap[reset] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(sx126x_ant_sw) > 0 && settingsMap[sx126x_ant_sw] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[sx126x_ant_sw], gpioChipName) != ERRNO_OK) {
-            settingsMap[sx126x_ant_sw] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(user) > 0 && settingsMap[user] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[user], gpioChipName) != ERRNO_OK) {
-            settingsMap[user] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(rxen) > 0 && settingsMap[rxen] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[rxen], gpioChipName) != ERRNO_OK) {
-            settingsMap[rxen] = RADIOLIB_NC;
-        }
-    }
-    if (settingsMap.count(txen) > 0 && settingsMap[txen] != RADIOLIB_NC) {
-        if (initGPIOPin(settingsMap[txen], gpioChipName) != ERRNO_OK) {
-            settingsMap[txen] = RADIOLIB_NC;
-        }
-    }
-
-    if (settingsMap[displayPanel] != no_screen) {
-        if (settingsMap[displayCS] > 0)
-            initGPIOPin(settingsMap[displayCS], gpioChipName);
-        if (settingsMap[displayDC] > 0)
-            initGPIOPin(settingsMap[displayDC], gpioChipName);
-        if (settingsMap[displayBacklight] > 0)
-            initGPIOPin(settingsMap[displayBacklight], gpioChipName);
-        if (settingsMap[displayReset] > 0)
-            initGPIOPin(settingsMap[displayReset], gpioChipName);
-    }
-    if (settingsMap[touchscreenModule] != no_touchscreen) {
-        if (settingsMap[touchscreenCS] > 0)
-            initGPIOPin(settingsMap[touchscreenCS], gpioChipName);
-        if (settingsMap[touchscreenIRQ] > 0)
-            initGPIOPin(settingsMap[touchscreenIRQ], gpioChipName);
-    }
-
-    if (settingsStrings[spidev] != "") {
-        SPI.begin(settingsStrings[spidev].c_str());
-    }
-    if (settingsStrings[traceFilename] != "") {
-        try {
-            traceFile.open(settingsStrings[traceFilename], std::ios::out | std::ios::app);
-        } catch (std::ofstream::failure &e) {
-            std::cout << "*** traceFile Exception " << e.what() << std::endl;
-            exit(EXIT_FAILURE);
-        }
-    }
-
-    return;
+    return true;
 }
 
-int initGPIOPin(int pinNum, const std::string gpioChipName)
+// https://stackoverflow.com/questions/874134/find-out-if-string-ends-with-another-string-in-c
+static bool ends_with(std::string_view str, std::string_view suffix)
 {
-#ifdef PORTDUINO_LINUX_HARDWARE
-    std::string gpio_name = "GPIO" + std::to_string(pinNum);
-    try {
-        GPIOPin *csPin;
-        csPin = new LinuxGPIOPin(pinNum, gpioChipName.c_str(), pinNum, gpio_name.c_str());
-        csPin->setSilent();
-        gpioBind(csPin);
-        return ERRNO_OK;
-    } catch (...) {
-        std::exception_ptr p = std::current_exception();
-        std::cout << "Warning, cannot claim pin " << gpio_name << (p ? p.__cxa_exception_type()->name() : "null") << std::endl;
-        return ERRNO_DISABLED;
+    return str.size() >= suffix.size() && str.compare(str.size() - suffix.size(), suffix.size(), suffix) == 0;
+}
+
+bool MAC_from_string(std::string mac_str, uint8_t *dmac)
+{
+    mac_str.erase(std::remove(mac_str.begin(), mac_str.end(), ':'), mac_str.end());
+    if (mac_str.length() == 12) {
+        dmac[0] = std::stoi(settingsStrings[mac_address].substr(0, 2), nullptr, 16);
+        dmac[1] = std::stoi(settingsStrings[mac_address].substr(2, 2), nullptr, 16);
+        dmac[2] = std::stoi(settingsStrings[mac_address].substr(4, 2), nullptr, 16);
+        dmac[3] = std::stoi(settingsStrings[mac_address].substr(6, 2), nullptr, 16);
+        dmac[4] = std::stoi(settingsStrings[mac_address].substr(8, 2), nullptr, 16);
+        dmac[5] = std::stoi(settingsStrings[mac_address].substr(10, 2), nullptr, 16);
+        return true;
+    } else {
+        return false;
     }
-#else
-    return ERRNO_OK;
-#endif
-}
\ No newline at end of file
+}
diff --git a/src/platform/portduino/PortduinoGlue.h b/src/platform/portduino/PortduinoGlue.h
index 8ee96717e..5bc07df6a 100644
--- a/src/platform/portduino/PortduinoGlue.h
+++ b/src/platform/portduino/PortduinoGlue.h
@@ -2,6 +2,8 @@
 #include 
 #include 
 
+#include "platform/portduino/USBHal.h"
+
 enum configNames {
     use_sx1262,
     cs,
@@ -13,10 +15,15 @@ enum configNames {
     rxen,
     dio2_as_rf_switch,
     dio3_tcxo_voltage,
-    ch341Quirk,
     use_rf95,
     use_sx1280,
+    use_lr1110,
+    use_lr1120,
+    use_lr1121,
     use_sx1268,
+    lora_usb_serial_num,
+    lora_usb_pid,
+    lora_usb_vid,
     user,
     gpiochip,
     spidev,
@@ -48,6 +55,7 @@ enum configNames {
     displayOffsetY,
     displayInvert,
     keyboardDevice,
+    pointerDevice,
     logoutputlevel,
     traceFilename,
     webserver,
@@ -55,13 +63,20 @@ enum configNames {
     webserverrootpath,
     maxtophone,
     maxnodes,
-    ascii_logs
+    ascii_logs,
+    config_directory,
+    mac_address
 };
-enum { no_screen, x11, st7789, st7735, st7735s, st7796, ili9341, ili9342, ili9488, hx8357d };
+enum { no_screen, x11, st7789, st7735, st7735s, st7796, ili9341, ili9342, ili9486, ili9488, hx8357d };
 enum { no_touchscreen, xpt2046, stmpe610, gt911, ft5x06 };
 enum { level_error, level_warn, level_info, level_debug, level_trace };
 
 extern std::map settingsMap;
 extern std::map settingsStrings;
 extern std::ofstream traceFile;
-int initGPIOPin(int pinNum, std::string gpioChipname);
\ No newline at end of file
+extern Ch341Hal *ch341Hal;
+int initGPIOPin(int pinNum, std::string gpioChipname);
+bool loadConfig(const char *configPath);
+static bool ends_with(std::string_view str, std::string_view suffix);
+void getMacAddr(uint8_t *dmac);
+bool MAC_from_string(std::string mac_str, uint8_t *dmac);
diff --git a/src/platform/portduino/SimRadio.cpp b/src/platform/portduino/SimRadio.cpp
index 840a0f5ba..7e63b995e 100644
--- a/src/platform/portduino/SimRadio.cpp
+++ b/src/platform/portduino/SimRadio.cpp
@@ -22,7 +22,7 @@ ErrorCode SimRadio::send(meshtastic_MeshPacket *p)
 
     // set (random) transmit delay to let others reconfigure their radio,
     // to avoid collisions and implement timing-based flooding
-    LOG_DEBUG("Set random delay before transmitting.");
+    LOG_DEBUG("Set random delay before tx");
     setTransmitDelay();
     return res;
 }
@@ -73,6 +73,10 @@ void SimRadio::handleTransmitInterrupt()
     // ignore the transmit interrupt
     if (sendingPacket)
         completeSending();
+
+    isReceiving = true;
+    if (receivingPacket) // This happens when we don't consider something a collision if we weren't sending long enough
+        handleReceiveInterrupt();
 }
 
 void SimRadio::completeSending()
@@ -84,6 +88,8 @@ void SimRadio::completeSending()
 
     if (p) {
         txGood++;
+        if (!isFromUs(p))
+            txRelay++;
         printPacket("Completed sending", p);
 
         // We are done sending that packet, release it
@@ -113,12 +119,12 @@ bool SimRadio::canSendImmediately()
 
 bool SimRadio::isActivelyReceiving()
 {
-    return false; // TODO check how this should be simulated
+    return receivingPacket != nullptr;
 }
 
 bool SimRadio::isChannelActive()
 {
-    return false; // TODO ask simulator
+    return receivingPacket != nullptr;
 }
 
 /** Attempt to cancel a previously sent packet.  Returns true if a packet was found we could cancel */
@@ -142,10 +148,16 @@ void SimRadio::onNotify(uint32_t notification)
         startTransmitTimer();
         break;
     case ISR_RX:
+        handleReceiveInterrupt();
         //  LOG_DEBUG("rx complete - starting timer");
         startTransmitTimer();
         break;
     case TRANSMIT_DELAY_COMPLETED:
+        if (receivingPacket) { // This happens when we had a timer pending and we started receiving
+            handleReceiveInterrupt();
+            startTransmitTimer();
+            break;
+        }
         LOG_DEBUG("delay done");
 
         // If we are not currently in receive mode, then restart the random delay (this can happen if the main thread
@@ -182,18 +194,19 @@ void SimRadio::onNotify(uint32_t notification)
 /** start an immediate transmit */
 void SimRadio::startSend(meshtastic_MeshPacket *txp)
 {
-    printPacket("Starting low level send", txp);
+    printPacket("Start low level send", txp);
+    isReceiving = false;
     size_t numbytes = beginSending(txp);
     meshtastic_MeshPacket *p = packetPool.allocCopy(*txp);
     perhapsDecode(p);
     meshtastic_Compressed c = meshtastic_Compressed_init_default;
     c.portnum = p->decoded.portnum;
-    // LOG_DEBUG("Sending back to simulator with portNum %d", p->decoded.portnum);
+    // LOG_DEBUG("Send back to simulator with portNum %d", p->decoded.portnum);
     if (p->decoded.payload.size <= sizeof(c.data.bytes)) {
         memcpy(&c.data.bytes, p->decoded.payload.bytes, p->decoded.payload.size);
         c.data.size = p->decoded.payload.size;
     } else {
-        LOG_WARN("Payload size is larger than compressed message allows! Sending empty payload.");
+        LOG_WARN("Payload size larger than compressed message allows! Send empty payload");
     }
     p->decoded.payload.size =
         pb_encode_to_bytes(p->decoded.payload.bytes, sizeof(p->decoded.payload.bytes), &meshtastic_Compressed_msg, &c);
@@ -201,15 +214,64 @@ void SimRadio::startSend(meshtastic_MeshPacket *txp)
 
     service->sendQueueStatusToPhone(router->getQueueStatus(), 0, p->id);
     service->sendToPhone(p); // Sending back to simulator
+    service->loop();         // Process the send immediately
+}
+
+// Simulates device received a packet via the LoRa chip
+void SimRadio::unpackAndReceive(meshtastic_MeshPacket &p)
+{
+    // Simulator packet (=Compressed packet) is encapsulated in a MeshPacket, so need to unwrap first
+    meshtastic_Compressed scratch;
+    meshtastic_Compressed *decoded = NULL;
+    if (p.which_payload_variant == meshtastic_MeshPacket_decoded_tag) {
+        memset(&scratch, 0, sizeof(scratch));
+        p.decoded.payload.size =
+            pb_decode_from_bytes(p.decoded.payload.bytes, p.decoded.payload.size, &meshtastic_Compressed_msg, &scratch);
+        if (p.decoded.payload.size) {
+            decoded = &scratch;
+            // Extract the original payload and replace
+            memcpy(&p.decoded.payload, &decoded->data, sizeof(decoded->data));
+            // Switch the port from PortNum_SIMULATOR_APP back to the original PortNum
+            p.decoded.portnum = decoded->portnum;
+        } else
+            LOG_ERROR("Error decoding proto for simulator message!");
+    }
+    // Let SimRadio receive as if it did via its LoRa chip
+    startReceive(&p);
 }
 
 void SimRadio::startReceive(meshtastic_MeshPacket *p)
 {
+#ifdef USERPREFS_SIMRADIO_EMULATE_COLLISIONS
+    if (isActivelyReceiving()) {
+        LOG_WARN("Collision detected, dropping current and previous packet!");
+        rxBad++;
+        airTime->logAirtime(RX_ALL_LOG, getPacketTime(receivingPacket));
+        packetPool.release(receivingPacket);
+        receivingPacket = nullptr;
+        return;
+    } else if (sendingPacket) {
+        uint32_t airtimeLeft = tillRun(millis());
+        if (airtimeLeft <= 0) {
+            LOG_WARN("Transmitting packet was already done");
+            handleTransmitInterrupt(); // Finish sending first
+        } else if ((interval - airtimeLeft) > preambleTimeMsec) {
+            // Only if transmitting for longer than preamble there is a collision
+            // (channel should actually be detected as active otherwise)
+            LOG_WARN("Collision detected during transmission!");
+            return;
+        }
+    }
     isReceiving = true;
-    size_t length = getPacketLength(p);
-    uint32_t xmitMsec = getPacketTime(length);
-    delay(xmitMsec); // Model the time it is busy receiving
-    handleReceiveInterrupt(p);
+    receivingPacket = packetPool.allocCopy(*p);
+    uint32_t airtimeMsec = getPacketTime(p);
+    notifyLater(airtimeMsec, ISR_RX, false); // Model the time it is busy receiving
+#else
+    isReceiving = true;
+    receivingPacket = packetPool.allocCopy(*p);
+    handleReceiveInterrupt(); // Simulate receiving the packet immediately
+    startTransmitTimer();
+#endif
 }
 
 meshtastic_QueueStatus SimRadio::getQueueStatus()
@@ -223,28 +285,27 @@ meshtastic_QueueStatus SimRadio::getQueueStatus()
     return qs;
 }
 
-void SimRadio::handleReceiveInterrupt(meshtastic_MeshPacket *p)
+void SimRadio::handleReceiveInterrupt()
 {
-    LOG_DEBUG("HANDLE RECEIVE INTERRUPT");
-    uint32_t xmitMsec;
+    if (receivingPacket == nullptr) {
+        return;
+    }
 
     if (!isReceiving) {
         LOG_DEBUG("*** WAS_ASSERT *** handleReceiveInterrupt called when not in receive mode");
         return;
     }
 
-    isReceiving = false;
+    LOG_DEBUG("HANDLE RECEIVE INTERRUPT");
+    rxGood++;
 
-    // read the number of actually received bytes
-    size_t length = getPacketLength(p);
-    xmitMsec = getPacketTime(length);
-    // LOG_DEBUG("Payload size %d vs length (includes header) %d", p->decoded.payload.size, length);
-
-    meshtastic_MeshPacket *mp = packetPool.allocCopy(*p); // keep a copy in packetPool
+    meshtastic_MeshPacket *mp = packetPool.allocCopy(*receivingPacket); // keep a copy in packetPool
+    packetPool.release(receivingPacket);                                // release the original
+    receivingPacket = nullptr;
 
     printPacket("Lora RX", mp);
 
-    airTime->logAirtime(RX_LOG, xmitMsec);
+    airTime->logAirtime(RX_LOG, getPacketTime(mp));
 
     deliverToReceiver(mp);
 }
diff --git a/src/platform/portduino/SimRadio.h b/src/platform/portduino/SimRadio.h
index 1edb4963b..c082444e5 100644
--- a/src/platform/portduino/SimRadio.h
+++ b/src/platform/portduino/SimRadio.h
@@ -11,11 +11,6 @@ class SimRadio : public RadioInterface, protected concurrency::NotifiedWorkerThr
 {
     enum PendingISR { ISR_NONE = 0, ISR_RX, ISR_TX, TRANSMIT_DELAY_COMPLETED };
 
-    /**
-     * Debugging counts
-     */
-    uint32_t rxBad = 0, rxGood = 0, txGood = 0;
-
     MeshPacketQueue txQueue = MeshPacketQueue(MAX_TX_QUEUE);
 
   public:
@@ -47,9 +42,17 @@ class SimRadio : public RadioInterface, protected concurrency::NotifiedWorkerThr
 
     meshtastic_QueueStatus getQueueStatus() override;
 
+    // Convert Compressed_msg to normal msg and receive it
+    void unpackAndReceive(meshtastic_MeshPacket &p);
+
+    /**
+     * Debugging counts
+     */
+    uint32_t rxBad = 0, rxGood = 0, txGood = 0, txRelay = 0;
+
   protected:
     /// are _trying_ to receive a packet currently (note - we might just be waiting for one)
-    bool isReceiving = false;
+    bool isReceiving = true;
 
   private:
     void setTransmitDelay();
@@ -61,7 +64,7 @@ class SimRadio : public RadioInterface, protected concurrency::NotifiedWorkerThr
     void startTransmitTimerSNR(float snr);
 
     void handleTransmitInterrupt();
-    void handleReceiveInterrupt(meshtastic_MeshPacket *p);
+    void handleReceiveInterrupt();
 
     void onNotify(uint32_t notification);
 
@@ -73,6 +76,8 @@ class SimRadio : public RadioInterface, protected concurrency::NotifiedWorkerThr
 
     int16_t readData(uint8_t *str, size_t len);
 
+    meshtastic_MeshPacket *receivingPacket = nullptr; // The packet we are currently receiving
+
   protected:
     /** Could we send right now (i.e. either not actively receiving or transmitting)? */
     virtual bool canSendImmediately();
diff --git a/src/platform/portduino/USBHal.h b/src/platform/portduino/USBHal.h
new file mode 100644
index 000000000..2b0302ced
--- /dev/null
+++ b/src/platform/portduino/USBHal.h
@@ -0,0 +1,194 @@
+#ifndef PI_HAL_LGPIO_H
+#define PI_HAL_LGPIO_H
+
+// include RadioLib
+#include "platform/portduino/PortduinoGlue.h"
+#include 
+#include 
+#include 
+#include 
+
+// include the library for Raspberry GPIO pins
+
+#define PI_RISING (PINEDIO_INT_MODE_RISING)
+#define PI_FALLING (PINEDIO_INT_MODE_FALLING)
+#define PI_INPUT (0)
+#define PI_OUTPUT (1)
+#define PI_LOW (0)
+#define PI_HIGH (1)
+
+#define CH341_PIN_CS (101)
+#define CH341_PIN_IRQ (0)
+
+// the HAL must inherit from the base RadioLibHal class
+// and implement all of its virtual methods
+class Ch341Hal : public RadioLibHal
+{
+  public:
+    // default constructor - initializes the base HAL and any needed private members
+    Ch341Hal(uint8_t spiChannel, uint32_t spiSpeed = 2000000, uint8_t spiDevice = 0, uint8_t gpioDevice = 0)
+        : RadioLibHal(PI_INPUT, PI_OUTPUT, PI_LOW, PI_HIGH, PI_RISING, PI_FALLING)
+    {
+    }
+
+    void getSerialString(char *_serial, size_t len)
+    {
+        if (!pinedio_is_init) {
+            return;
+        }
+        strncpy(_serial, pinedio.serial_number, len);
+    }
+
+    void init() override
+    {
+        // now the SPI
+        spiBegin();
+    }
+
+    void term() override
+    {
+        // stop the SPI
+        spiEnd();
+    }
+
+    // GPIO-related methods (pinMode, digitalWrite etc.) should check
+    // RADIOLIB_NC as an alias for non-connected pins
+    void pinMode(uint32_t pin, uint32_t mode) override
+    {
+        if (pin == RADIOLIB_NC) {
+            return;
+        }
+        pinedio_set_pin_mode(&pinedio, pin, mode);
+    }
+
+    void digitalWrite(uint32_t pin, uint32_t value) override
+    {
+        if (pin == RADIOLIB_NC) {
+            return;
+        }
+        pinedio_digital_write(&pinedio, pin, value);
+    }
+
+    uint32_t digitalRead(uint32_t pin) override
+    {
+        if (pin == RADIOLIB_NC) {
+            return 0;
+        }
+        return pinedio_digital_read(&pinedio, pin);
+    }
+
+    void attachInterrupt(uint32_t interruptNum, void (*interruptCb)(void), uint32_t mode) override
+    {
+        if ((interruptNum == RADIOLIB_NC)) {
+            return;
+        }
+        // LOG_DEBUG("Attach interrupt to pin %d", interruptNum);
+        pinedio_attach_interrupt(&this->pinedio, (pinedio_int_pin)interruptNum, (pinedio_int_mode)mode, interruptCb);
+    }
+
+    void detachInterrupt(uint32_t interruptNum) override
+    {
+        if ((interruptNum == RADIOLIB_NC)) {
+            return;
+        }
+        // LOG_DEBUG("Detach interrupt from pin %d", interruptNum);
+
+        pinedio_deattach_interrupt(&this->pinedio, (pinedio_int_pin)interruptNum);
+    }
+
+    void delay(unsigned long ms) override
+    {
+        if (ms == 0) {
+            sched_yield();
+            return;
+        }
+
+        usleep(ms * 1000);
+    }
+
+    void delayMicroseconds(unsigned long us) override
+    {
+        if (us == 0) {
+            sched_yield();
+            return;
+        }
+        usleep(us);
+    }
+
+    void yield() override { sched_yield(); }
+
+    unsigned long millis() override
+    {
+        struct timeval tv;
+        gettimeofday(&tv, NULL);
+        return (tv.tv_sec * 1000ULL) + (tv.tv_usec / 1000ULL);
+    }
+
+    unsigned long micros() override
+    {
+        struct timeval tv;
+        gettimeofday(&tv, NULL);
+        return (tv.tv_sec * 1000000ULL) + tv.tv_usec;
+    }
+
+    long pulseIn(uint32_t pin, uint32_t state, unsigned long timeout) override
+    {
+        fprintf(stderr, "pulseIn for pin %u is not supported!\n", pin);
+        return 0;
+    }
+
+    void spiBegin()
+    {
+        if (!pinedio_is_init) {
+            if (serial != "") {
+                strncpy(pinedio.serial_number, serial.c_str(), 8);
+                pinedio_set_option(&pinedio, PINEDIO_OPTION_SEARCH_SERIAL, 1);
+            }
+            pinedio_set_option(&pinedio, PINEDIO_OPTION_PID, pid);
+            pinedio_set_option(&pinedio, PINEDIO_OPTION_VID, vid);
+            int32_t ret = pinedio_init(&pinedio, NULL);
+            if (ret != 0) {
+                fprintf(stderr, "Could not open SPI: %d\n", ret);
+            } else {
+                pinedio_is_init = true;
+                // LOG_INFO("USB Serial: %s", pinedio.serial_number);
+                pinedio_set_option(&pinedio, PINEDIO_OPTION_AUTO_CS, 0);
+                pinedio_set_pin_mode(&pinedio, 3, true);
+                pinedio_set_pin_mode(&pinedio, 5, true);
+            }
+        }
+    }
+
+    void spiBeginTransaction() {}
+
+    void spiTransfer(uint8_t *out, size_t len, uint8_t *in)
+    {
+        int32_t result = pinedio_transceive(&this->pinedio, out, in, len);
+        if (result < 0) {
+            fprintf(stderr, "Could not perform SPI transfer: %d\n", result);
+        }
+    }
+
+    void spiEndTransaction() {}
+
+    void spiEnd()
+    {
+        if (pinedio_is_init) {
+            pinedio_deinit(&pinedio);
+            pinedio_is_init = false;
+        }
+    }
+
+    bool isInit() { return pinedio_is_init; }
+
+    std::string serial = "";
+    uint32_t pid = 0x5512;
+    uint32_t vid = 0x1A86;
+
+  private:
+    // the HAL can contain any additional private members
+    pinedio_inst pinedio = {0};
+    bool pinedio_is_init = false;
+};
+
+#endif
\ No newline at end of file
diff --git a/src/platform/portduino/architecture.h b/src/platform/portduino/architecture.h
index 321949226..3dde87199 100644
--- a/src/platform/portduino/architecture.h
+++ b/src/platform/portduino/architecture.h
@@ -11,6 +11,9 @@
 #ifndef HAS_WIFI
 #define HAS_WIFI 1
 #endif
+#ifndef HAS_RADIO
+#define HAS_RADIO 1
+#endif
 #ifndef HAS_RTC
 #define HAS_RTC 1
 #endif
diff --git a/src/platform/rp2xx0/architecture.h b/src/platform/rp2xx0/architecture.h
index 8c7dfc0cd..506c19c83 100644
--- a/src/platform/rp2xx0/architecture.h
+++ b/src/platform/rp2xx0/architecture.h
@@ -33,4 +33,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_LORA
 #elif defined(RP2040_FEATHER_RFM95)
 #define HW_VENDOR meshtastic_HardwareModel_RP2040_FEATHER_RFM95
+#elif defined(PRIVATE_HW)
+#define HW_VENDOR meshtastic_HardwareModel_PRIVATE_HW
 #endif
\ No newline at end of file
diff --git a/src/power.h b/src/power.h
index 63335104b..ab55fc7e1 100644
--- a/src/power.h
+++ b/src/power.h
@@ -42,10 +42,12 @@ extern RTC_NOINIT_ATTR uint64_t RTC_reg_b;
 
 #if HAS_TELEMETRY && !MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR && !defined(ARCH_PORTDUINO)
 #include "modules/Telemetry/Sensor/INA219Sensor.h"
+#include "modules/Telemetry/Sensor/INA226Sensor.h"
 #include "modules/Telemetry/Sensor/INA260Sensor.h"
 #include "modules/Telemetry/Sensor/INA3221Sensor.h"
-extern INA260Sensor ina260Sensor;
 extern INA219Sensor ina219Sensor;
+extern INA226Sensor ina226Sensor;
+extern INA260Sensor ina260Sensor;
 extern INA3221Sensor ina3221Sensor;
 #endif
 
@@ -99,4 +101,4 @@ class Power : private concurrency::OSThread
 #endif
 };
 
-extern Power *power;
\ No newline at end of file
+extern Power *power;
diff --git a/src/serialization/MeshPacketSerializer.cpp b/src/serialization/MeshPacketSerializer.cpp
index 21fb377b2..b4603186b 100644
--- a/src/serialization/MeshPacketSerializer.cpp
+++ b/src/serialization/MeshPacketSerializer.cpp
@@ -11,6 +11,7 @@
 #include "../mesh/generated/meshtastic/paxcount.pb.h"
 #endif
 #include "mesh/generated/meshtastic/remote_hardware.pb.h"
+#include 
 
 std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp, bool shouldLog)
 {
@@ -77,6 +78,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     msgPayload["wind_direction"] = new JSONValue((uint)decoded->variant.environment_metrics.wind_direction);
                     msgPayload["wind_gust"] = new JSONValue(decoded->variant.environment_metrics.wind_gust);
                     msgPayload["wind_lull"] = new JSONValue(decoded->variant.environment_metrics.wind_lull);
+                    msgPayload["radiation"] = new JSONValue(decoded->variant.environment_metrics.radiation);
                 } else if (decoded->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
                     msgPayload["pm10"] = new JSONValue((unsigned int)decoded->variant.air_quality_metrics.pm10_standard);
                     msgPayload["pm25"] = new JSONValue((unsigned int)decoded->variant.air_quality_metrics.pm25_standard);
diff --git a/src/serialization/MeshPacketSerializer.h b/src/serialization/MeshPacketSerializer.h
index f248b2b76..12efccb43 100644
--- a/src/serialization/MeshPacketSerializer.h
+++ b/src/serialization/MeshPacketSerializer.h
@@ -2,7 +2,7 @@
 #include 
 
 static const char hexChars[16] = {'0', '1', '2', '3', '4', '5', '6', '7', '8', '9', 'A', 'B', 'C', 'D', 'E', 'F'};
-static const char *errStr = "Error decoding protobuf for %s message!";
+static const char *errStr = "Error decoding proto for %s message!";
 
 class MeshPacketSerializer
 {
diff --git a/src/serialization/MeshPacketSerializer_nRF52.cpp b/src/serialization/MeshPacketSerializer_nRF52.cpp
index 6e497f934..89ecddfad 100644
--- a/src/serialization/MeshPacketSerializer_nRF52.cpp
+++ b/src/serialization/MeshPacketSerializer_nRF52.cpp
@@ -77,6 +77,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     jsonObj["payload"]["wind_direction"] = (uint)decoded->variant.environment_metrics.wind_direction;
                     jsonObj["payload"]["wind_gust"] = decoded->variant.environment_metrics.wind_gust;
                     jsonObj["payload"]["wind_lull"] = decoded->variant.environment_metrics.wind_lull;
+                    jsonObj["payload"]["radiation"] = decoded->variant.environment_metrics.radiation;
                 } else if (decoded->which_variant == meshtastic_Telemetry_air_quality_metrics_tag) {
                     jsonObj["payload"]["pm10"] = (unsigned int)decoded->variant.air_quality_metrics.pm10_standard;
                     jsonObj["payload"]["pm25"] = (unsigned int)decoded->variant.air_quality_metrics.pm25_standard;
@@ -93,7 +94,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     jsonObj["payload"]["current_ch3"] = decoded->variant.power_metrics.ch3_current;
                 }
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for telemetry message!");
+                LOG_ERROR("Error decoding proto for telemetry message!");
                 return "";
             }
             break;
@@ -111,7 +112,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                 jsonObj["payload"]["hardware"] = decoded->hw_model;
                 jsonObj["payload"]["role"] = (int)decoded->role;
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for nodeinfo message!");
+                LOG_ERROR("Error decoding proto for nodeinfo message!");
                 return "";
             }
             break;
@@ -156,7 +157,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     jsonObj["payload"]["precision_bits"] = (int)decoded->precision_bits;
                 }
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for position message!");
+                LOG_ERROR("Error decoding proto for position message!");
                 return "";
             }
             break;
@@ -176,7 +177,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                 jsonObj["payload"]["latitude_i"] = (int)decoded->latitude_i;
                 jsonObj["payload"]["longitude_i"] = (int)decoded->longitude_i;
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for position message!");
+                LOG_ERROR("Error decoding proto for position message!");
                 return "";
             }
             break;
@@ -207,7 +208,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                 neighbors.remove(0);
                 jsonObj["payload"]["neighbors"] = neighbors;
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for neighborinfo message!");
+                LOG_ERROR("Error decoding proto for neighborinfo message!");
                 return "";
             }
             break;
@@ -241,7 +242,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
 
                     jsonObj["payload"]["route"] = route;
                 } else if (shouldLog) {
-                    LOG_ERROR("Error decoding protobuf for traceroute message!");
+                    LOG_ERROR("Error decoding proto for traceroute message!");
                     return "";
                 }
             } else {
@@ -274,7 +275,7 @@ std::string MeshPacketSerializer::JsonSerialize(const meshtastic_MeshPacket *mp,
                     jsonObj["payload"]["gpio_mask"] = (unsigned int)decoded->gpio_mask;
                 }
             } else if (shouldLog) {
-                LOG_ERROR("Error decoding protobuf for RemoteHardware message!");
+                LOG_ERROR("Error decoding proto for RemoteHardware message!");
                 return "";
             }
             break;
diff --git a/src/shutdown.h b/src/shutdown.h
index 4bf3036c0..9e30e772c 100644
--- a/src/shutdown.h
+++ b/src/shutdown.h
@@ -32,7 +32,7 @@ void powerCommandsCheck()
         reboot();
 #else
         rebootAtMsec = -1;
-        LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied.");
+        LOG_WARN("FIXME implement reboot for this platform. Note that some settings require a restart to be applied");
 #endif
     }
 
@@ -43,7 +43,7 @@ void powerCommandsCheck()
 #endif
 
     if (shutdownAtMsec && millis() > shutdownAtMsec) {
-        LOG_INFO("Shutting down from admin command");
+        LOG_INFO("Shut down from admin command");
 #if defined(ARCH_NRF52) || defined(ARCH_ESP32) || defined(ARCH_RP2040)
         playShutdownMelody();
         power->shutdown();
diff --git a/src/sleep.cpp b/src/sleep.cpp
index 3bc1042bb..69eb0349a 100644
--- a/src/sleep.cpp
+++ b/src/sleep.cpp
@@ -71,7 +71,7 @@ void setCPUFast(bool on)
          * (Added: Dec 23, 2021 by Jm Casler)
          */
 #ifndef CONFIG_IDF_TARGET_ESP32C3
-        LOG_DEBUG("Setting CPU to 240MHz because WiFi is in use.");
+        LOG_DEBUG("Set CPU to 240MHz because WiFi is in use");
         setCpuFrequencyMhz(240);
 #endif
         return;
@@ -140,7 +140,7 @@ void initDeepSleep()
 #if SOC_RTCIO_HOLD_SUPPORTED
     // If waking from sleep, release any and all RTC GPIOs
     if (wakeCause != ESP_SLEEP_WAKEUP_UNDEFINED) {
-        LOG_DEBUG("Disabling any holds on RTC IO pads");
+        LOG_DEBUG("Disable any holds on RTC IO pads");
         for (uint8_t i = 0; i <= GPIO_NUM_MAX; i++) {
             if (rtc_gpio_is_valid_gpio((gpio_num_t)i))
                 rtc_gpio_hold_dis((gpio_num_t)i);
@@ -187,12 +187,12 @@ static void waitEnterSleep(bool skipPreflight = false)
     notifySleep.notifyObservers(NULL);
 }
 
-void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
+void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false, bool skipSaveNodeDb = false)
 {
     if (INCLUDE_vTaskSuspend && (msecToWake == portMAX_DELAY)) {
-        LOG_INFO("Entering deep sleep forever");
+        LOG_INFO("Enter deep sleep forever");
     } else {
-        LOG_INFO("Entering deep sleep for %u seconds", msecToWake / 1000);
+        LOG_INFO("Enter deep sleep for %u seconds", msecToWake / 1000);
     }
 
     // not using wifi yet, but once we are this is needed to shutoff the radio hw
@@ -219,7 +219,9 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
 
     screen->doDeepSleep(); // datasheet says this will draw only 10ua
 
-    nodeDB->saveToDisk();
+    if (!skipSaveNodeDb) {
+        nodeDB->saveToDisk();
+    }
 
 #ifdef PIN_POWER_EN
     pinMode(PIN_POWER_EN, INPUT); // power off peripherals
@@ -287,7 +289,7 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
         // No need to turn this off if the power draw in sleep mode really is just 0.2uA and turning it off would
         // leave floating input for the IRQ line
         // If we want to leave the radio receiving in would be 11.5mA current draw, but most of the time it is just waiting
-        // in its sequencer (true?) so the average power draw should be much lower even if we were listinging for packets
+        // in its sequencer (true?) so the average power draw should be much lower even if we were listening for packets
         // all the time.
         PMU->setChargingLedMode(XPOWERS_CHG_LED_OFF);
 
@@ -305,7 +307,7 @@ void doDeepSleep(uint32_t msecToWake, bool skipPreflight = false)
             PMU->disablePowerOutput(XPOWERS_LDO2); // lora radio power channel
         }
         if (msecToWake == portMAX_DELAY) {
-            LOG_INFO("PMU shutdown.");
+            LOG_INFO("PMU shutdown");
             console->flush();
             PMU->shutdown();
         }
@@ -334,6 +336,12 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
 {
     // LOG_DEBUG("Enter light sleep");
 
+    // LORA_DIO1 is an extended IO pin. Setting it as a wake-up pin will cause problems, such as the indicator device not entering
+    // LightSleep.
+#if defined(SENSECAP_INDICATOR)
+    return ESP_SLEEP_WAKEUP_TIMER;
+#endif
+
     waitEnterSleep(false);
 
     uint64_t sleepUsec = sleepMsec * 1000LL;
@@ -359,7 +367,7 @@ esp_sleep_wakeup_cause_t doLightSleep(uint64_t sleepMsec) // FIXME, use a more r
     // never tries to go to sleep if the user is using the API
     // gpio_wakeup_enable((gpio_num_t)SERIAL0_RX_GPIO, GPIO_INTR_LOW_LEVEL);
 
-    // doesn't help - I think the USB-UART chip losing power is pulling the signal llow
+    // doesn't help - I think the USB-UART chip losing power is pulling the signal low
     // gpio_pullup_en((gpio_num_t)SERIAL0_RX_GPIO);
 
     // alas - can only work if using the refclock, which is limited to about 9600 bps
@@ -512,4 +520,4 @@ void enableLoraInterrupt()
     }
 #endif
 }
-#endif
\ No newline at end of file
+#endif
diff --git a/src/sleep.h b/src/sleep.h
index 6ac420769..8d3cb17e8 100644
--- a/src/sleep.h
+++ b/src/sleep.h
@@ -4,7 +4,7 @@
 #include "Observer.h"
 #include "configuration.h"
 
-void doDeepSleep(uint32_t msecToWake, bool skipPreflight), cpuDeepSleep(uint32_t msecToWake);
+void doDeepSleep(uint32_t msecToWake, bool skipPreflight, bool skipSaveNodeDb), cpuDeepSleep(uint32_t msecToWake);
 
 #ifdef ARCH_ESP32
 #include "esp_sleep.h"
diff --git a/src/xmodem.cpp b/src/xmodem.cpp
index 9eef9690b..bf25e2da7 100644
--- a/src/xmodem.cpp
+++ b/src/xmodem.cpp
@@ -97,7 +97,7 @@ void XModemAdapter::sendControl(meshtastic_XModem_Control c)
 {
     xmodemStore = meshtastic_XModem_init_zero;
     xmodemStore.control = c;
-    LOG_DEBUG("XModem: Notify Sending control %d.", c);
+    LOG_DEBUG("XModem: Notify Send control %d", c);
     packetReady.notifyObservers(packetno);
 }
 
@@ -131,7 +131,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
                 isReceiving = false;
                 break;
             } else { // Transmit this file from Flash
-                LOG_INFO("XModem: Transmitting file %s", filename);
+                LOG_INFO("XModem: Transmit file %s", filename);
                 file = FSCom.open(filename, FILE_O_READ);
                 if (file) {
                     packetno = 1;
@@ -141,7 +141,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
                     xmodemStore.seq = packetno;
                     xmodemStore.buffer.size = file.read(xmodemStore.buffer.bytes, sizeof(meshtastic_XModem_buffer_t::bytes));
                     xmodemStore.crc16 = crc16_ccitt(xmodemStore.buffer.bytes, xmodemStore.buffer.size);
-                    LOG_DEBUG("XModem: STX Notify Sending packet %d, %d Bytes.", packetno, xmodemStore.buffer.size);
+                    LOG_DEBUG("XModem: STX Notify Send packet %d, %d Bytes", packetno, xmodemStore.buffer.size);
                     if (xmodemStore.buffer.size < sizeof(meshtastic_XModem_buffer_t::bytes)) {
                         isEOT = true;
                         // send EOT on next Ack
@@ -196,7 +196,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
             if (isEOT) {
                 sendControl(meshtastic_XModem_Control_EOT);
                 file.close();
-                LOG_INFO("XModem: Finished sending file %s", filename);
+                LOG_INFO("XModem: Finished send file %s", filename);
                 isTransmitting = false;
                 isEOT = false;
                 break;
@@ -208,7 +208,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
             xmodemStore.seq = packetno;
             xmodemStore.buffer.size = file.read(xmodemStore.buffer.bytes, sizeof(meshtastic_XModem_buffer_t::bytes));
             xmodemStore.crc16 = crc16_ccitt(xmodemStore.buffer.bytes, xmodemStore.buffer.size);
-            LOG_DEBUG("XModem: ACK Notify Sending packet %d, %d Bytes.", packetno, xmodemStore.buffer.size);
+            LOG_DEBUG("XModem: ACK Notify Send packet %d, %d Bytes", packetno, xmodemStore.buffer.size);
             if (xmodemStore.buffer.size < sizeof(meshtastic_XModem_buffer_t::bytes)) {
                 isEOT = true;
                 // send EOT on next Ack
@@ -225,7 +225,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
             if (--retrans <= 0) {
                 sendControl(meshtastic_XModem_Control_CAN);
                 file.close();
-                LOG_INFO("XModem: Retransmit timeout, cancelling file %s", filename);
+                LOG_INFO("XModem: Retransmit timeout, cancel file %s", filename);
                 isTransmitting = false;
                 break;
             }
@@ -235,7 +235,7 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
             file.seek((packetno - 1) * sizeof(meshtastic_XModem_buffer_t::bytes));
             xmodemStore.buffer.size = file.read(xmodemStore.buffer.bytes, sizeof(meshtastic_XModem_buffer_t::bytes));
             xmodemStore.crc16 = crc16_ccitt(xmodemStore.buffer.bytes, xmodemStore.buffer.size);
-            LOG_DEBUG("XModem: NAK Notify Sending packet %d, %d Bytes.", packetno, xmodemStore.buffer.size);
+            LOG_DEBUG("XModem: NAK Notify Send packet %d, %d Bytes", packetno, xmodemStore.buffer.size);
             if (xmodemStore.buffer.size < sizeof(meshtastic_XModem_buffer_t::bytes)) {
                 isEOT = true;
                 // send EOT on next Ack
@@ -251,4 +251,4 @@ void XModemAdapter::handlePacket(meshtastic_XModem xmodemPacket)
         break;
     }
 }
-#endif
\ No newline at end of file
+#endif
diff --git a/test/TestUtil.cpp b/test/TestUtil.cpp
new file mode 100644
index 000000000..b470b8ce8
--- /dev/null
+++ b/test/TestUtil.cpp
@@ -0,0 +1,18 @@
+#include "SerialConsole.h"
+#include "concurrency/OSThread.h"
+#include "gps/RTC.h"
+
+#include "TestUtil.h"
+
+void initializeTestEnvironment()
+{
+    concurrency::hasBeenSetup = true;
+    consoleInit();
+#if ARCH_PORTDUINO
+    struct timeval tv;
+    tv.tv_sec = time(NULL);
+    tv.tv_usec = 0;
+    perhapsSetRTC(RTCQualityNTP, &tv);
+#endif
+    concurrency::OSThread::setup();
+}
\ No newline at end of file
diff --git a/test/TestUtil.h b/test/TestUtil.h
new file mode 100644
index 000000000..ce021e459
--- /dev/null
+++ b/test/TestUtil.h
@@ -0,0 +1,4 @@
+#pragma once
+
+// Initialize testing environment.
+void initializeTestEnvironment();
\ No newline at end of file
diff --git a/test/test_crypto/test_main.cpp b/test/test_crypto/test_main.cpp
index 652d5dbcb..fd7706e6e 100644
--- a/test/test_crypto/test_main.cpp
+++ b/test/test_crypto/test_main.cpp
@@ -1,5 +1,6 @@
 #include "CryptoEngine.h"
 
+#include "TestUtil.h"
 #include 
 
 void HexToBytes(uint8_t *result, const std::string hex, size_t len = 0)
@@ -170,15 +171,14 @@ void setup()
     delay(10);
     delay(2000);
 
+    initializeTestEnvironment();
     UNITY_BEGIN(); // IMPORTANT LINE!
     RUN_TEST(test_SHA256);
     RUN_TEST(test_ECB_AES256);
     RUN_TEST(test_DH25519);
     RUN_TEST(test_AES_CTR);
     RUN_TEST(test_PKC_Decrypt);
+    exit(UNITY_END()); // stop unit testing
 }
 
-void loop()
-{
-    UNITY_END(); // stop unit testing
-}
\ No newline at end of file
+void loop() {}
\ No newline at end of file
diff --git a/userPrefs.h b/userPrefs.h
deleted file mode 100644
index ed622bcfb..000000000
--- a/userPrefs.h
+++ /dev/null
@@ -1,71 +0,0 @@
-#ifndef _USERPREFS_
-#define _USERPREFS_
-
-// Slipstream values:
-
-#define USERPREFS_TZ_STRING "tzplaceholder                                         "
-
-// Uncomment and modify to set device defaults
-
-// #define USERPREFS_EVENT_MODE 1
-
-// #define USERPREFS_CONFIG_LORA_REGION meshtastic_Config_LoRaConfig_RegionCode_US
-// #define USERPREFS_LORACONFIG_MODEM_PRESET meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST
-// #define USERPREFS_LORACONFIG_CHANNEL_NUM 31
-// #define USERPREFS_CONFIG_LORA_IGNORE_MQTT true
-
-// #define USERPREFS_CONFIG_GPS_MODE meshtastic_Config_PositionConfig_GpsMode_ENABLED
-
-// #define USERPREFS_CHANNELS_TO_WRITE 3
-/*
-#define USERPREFS_CHANNEL_0_PSK \
-    {                                                                                                                            \
-        0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55,  \
-            0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1                                               \
-    }
-*/
-// #define USERPREFS_CHANNEL_0_NAME "DEFCONnect"
-// #define USERPREFS_CHANNEL_0_PRECISION 14
-/*
-#define USERPREFS_CHANNEL_1_PSK \
-    {                                                                                                                            \
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  \
-            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00                                               \
-    }
-*/
-// #define USERPREFS_CHANNEL_1_NAME "REPLACEME"
-// #define USERPREFS_CHANNEL_1_PRECISION 14
-/*
-#define USERPREFS_CHANNEL_2_PSK \
-    {                                                                                                                            \
-        0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,  \
-            0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00                                              \
-    }
-*/
-// #define USERPREFS_CHANNEL_2_NAME "REPLACEME"
-// #define USERPREFS_CHANNEL_2_PRECISION 14
-
-// #define USERPREFS_CONFIG_OWNER_LONG_NAME "My Long Name"
-// #define USERPREFS_CONFIG_OWNER_SHORT_NAME "MLN"
-
-// #define USERPREFS_SPLASH_TITLE "DEFCONtastic"
-// #define icon_width 34
-// #define icon_height 29
-// #define USERPREFS_HAS_SPLASH
-/*
-static unsigned char icon_bits[] = {
-    0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0xF0, 0x3F, 0x00, 0x00, 0x00, 0xF8, 0x7F, 0x00, 0x00, 0x00, 0xFC, 0xFF, 0x00, 0x00, 0x00,
-    0x9E, 0xE7, 0x00, 0x00, 0x00, 0x0E, 0xC7, 0x01, 0x00, 0x1C, 0x0F, 0xC7, 0x01, 0x00, 0x1C, 0xDF, 0xE7, 0x63, 0x00, 0x1C, 0xFF,
-    0xBF, 0xE1, 0x00, 0x3C, 0xF3, 0xBF, 0xE3, 0x00, 0x7F, 0xF7, 0xBF, 0xF1, 0x00, 0xFF, 0xF7, 0xBF, 0xF9, 0x03, 0xFF, 0xE7, 0x9F,
-    0xFF, 0x03, 0xC0, 0xCF, 0xEF, 0xDF, 0x03, 0x00, 0xDF, 0xE3, 0x8F, 0x00, 0x00, 0x7C, 0xFB, 0x03, 0x00, 0x00, 0xF8, 0xFF, 0x00,
-    0x00, 0x00, 0xE0, 0x0F, 0x00, 0x00, 0x00, 0xC0, 0x0F, 0x00, 0x00, 0x00, 0x78, 0x3F, 0x00, 0x00, 0x00, 0xFC, 0xFC, 0x00, 0x00,
-    0x98, 0x3F, 0xF0, 0x23, 0x00, 0xFC, 0x0F, 0xE0, 0x7F, 0x00, 0xFC, 0x03, 0x80, 0xFF, 0x01, 0xFC, 0x00, 0x00, 0x3E, 0x00, 0x70,
-    0x00, 0x00, 0x1C, 0x00, 0x70, 0x00, 0x00, 0x1C, 0x00, 0x70, 0x00, 0x00, 0x1C, 0x00, 0x70, 0x00, 0x00, 0x1C, 0x00};
-*/
-/*
-#define USERPREFS_USE_ADMIN_KEY 1
-static unsigned char USERPREFS_ADMIN_KEY[] = {0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6,
-                                       0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a,
-                                       0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c};
-*/
-#endif
\ No newline at end of file
diff --git a/userPrefs.json b/userPrefs.json
deleted file mode 100644
index bc62602be..000000000
--- a/userPrefs.json
+++ /dev/null
@@ -1,16 +0,0 @@
-{
-  "USERPREFS_CHANNEL_0_NAME": "\"DEFCONnect\"",
-  "USERPREFS_CHANNEL_0_PRECISION": "14",
-  "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
-  "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
-  "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
-  "USERPREFS_CONFIG_OWNER_LONG_NAME": "\"My Long Name\"",
-  "USERPREFS_CONFIG_OWNER_SHORT_NAME": "\"MLN\"",
-  "USERPREFS_EVENT_MODE": "1",
-  "USERPREFS_HAS_SPLASH": "",
-  "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
-  "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
-  "USERPREFS_SPLASH_TITLE": "\"DEFCONtastic\"",
-  "USERPREFS_TZ_STRING": "\"tzplaceholder                                         \"",
-  "USERPREFS_USE_ADMIN_KEY": "1"
-}
diff --git a/userPrefs.jsonc b/userPrefs.jsonc
new file mode 100644
index 000000000..055f59273
--- /dev/null
+++ b/userPrefs.jsonc
@@ -0,0 +1,37 @@
+{
+  // "USERPREFS_BUTTON_PIN": "36",
+  // "USERPREFS_CHANNELS_TO_WRITE": "3",
+  // "USERPREFS_CHANNEL_0_DOWNLINK_ENABLED": "true",
+  // "USERPREFS_CHANNEL_0_NAME": "DEFCONnect",
+  // "USERPREFS_CHANNEL_0_PRECISION": "14",
+  // "USERPREFS_CHANNEL_0_PSK": "{ 0x38, 0x4b, 0xbc, 0xc0, 0x1d, 0xc0, 0x22, 0xd1, 0x81, 0xbf, 0x36, 0xb8, 0x61, 0x21, 0xe1, 0xfb, 0x96, 0xb7, 0x2e, 0x55, 0xbf, 0x74, 0x22, 0x7e, 0x9d, 0x6a, 0xfb, 0x48, 0xd6, 0x4c, 0xb1, 0xa1 }",
+  // "USERPREFS_CHANNEL_0_UPLINK_ENABLED": "true",
+  // "USERPREFS_CHANNEL_1_DOWNLINK_ENABLED": "true",
+  // "USERPREFS_CHANNEL_1_NAME": "REPLACEME",
+  // "USERPREFS_CHANNEL_1_PRECISION": "14",
+  // "USERPREFS_CHANNEL_1_PSK": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
+  // "USERPREFS_CHANNEL_1_UPLINK_ENABLED": "true",
+  // "USERPREFS_CHANNEL_2_DOWNLINK_ENABLED": "true",
+  // "USERPREFS_CHANNEL_2_NAME": "REPLACEME",
+  // "USERPREFS_CHANNEL_2_PRECISION": "14",
+  // "USERPREFS_CHANNEL_2_PSK": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
+  // "USERPREFS_CHANNEL_2_UPLINK_ENABLED": "true",
+  // "USERPREFS_CONFIG_GPS_MODE": "meshtastic_Config_PositionConfig_GpsMode_ENABLED",
+  // "USERPREFS_CONFIG_LORA_IGNORE_MQTT": "true",
+  // "USERPREFS_CONFIG_LORA_REGION": "meshtastic_Config_LoRaConfig_RegionCode_US",
+  // "USERPREFS_CONFIG_OWNER_LONG_NAME": "My Long Name",
+  // "USERPREFS_CONFIG_OWNER_SHORT_NAME": "MLN",
+  // "USERPREFS_EVENT_MODE": "1",
+  // "USERPREFS_FIXED_BLUETOOTH": "121212",
+  // "USERPREFS_FIXED_GPS": "",
+  // "USERPREFS_FIXED_GPS_ALT": "0",
+  // "USERPREFS_FIXED_GPS_LAT": "48.85873920",
+  // "USERPREFS_FIXED_GPS_LON": "2.294508368",
+  // "USERPREFS_LORACONFIG_CHANNEL_NUM": "31",
+  // "USERPREFS_LORACONFIG_MODEM_PRESET": "meshtastic_Config_LoRaConfig_ModemPreset_SHORT_FAST",
+  // "USERPREFS_SPLASH_TITLE": "DEFCONtastic",
+  "USERPREFS_TZ_STRING": "tzplaceholder                                         "
+  // "USERPREFS_USE_ADMIN_KEY_0": "{ 0xcd, 0xc0, 0xb4, 0x3c, 0x53, 0x24, 0xdf, 0x13, 0xca, 0x5a, 0xa6, 0x0c, 0x0d, 0xec, 0x85, 0x5a, 0x4c, 0xf6, 0x1a, 0x96, 0x04, 0x1a, 0x3e, 0xfc, 0xbb, 0x8e, 0x33, 0x71, 0xe5, 0xfc, 0xff, 0x3c }",
+  // "USERPREFS_USE_ADMIN_KEY_1": "{}",
+  // "USERPREFS_USE_ADMIN_KEY_2": "{}"
+}
\ No newline at end of file
diff --git a/variants/betafpv_2400_tx_micro/variant.h b/variants/betafpv_2400_tx_micro/variant.h
index fd06183ee..67699e7c8 100644
--- a/variants/betafpv_2400_tx_micro/variant.h
+++ b/variants/betafpv_2400_tx_micro/variant.h
@@ -34,4 +34,4 @@
 #define SX128X_TXEN 26
 #define SX128X_RXEN 27
 #define SX128X_RESET LORA_RESET
-#define SX128X_MAX_POWER 13
\ No newline at end of file
+#define SX128X_MAX_POWER 3
diff --git a/variants/chatter2/variant.h b/variants/chatter2/variant.h
index 5c27e2fb5..ff4f87bbe 100644
--- a/variants/chatter2/variant.h
+++ b/variants/chatter2/variant.h
@@ -6,7 +6,6 @@
 
 // Debugging
 // #define GPS_DEBUG
-// #define GPS_EXTRAVERBOSE
 
 // Lora
 #define USE_LLCC68 // Original Chatter2 with LLCC68 module
diff --git a/variants/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-Micro_Pinouts 2024-12-14.pdf b/variants/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-Micro_Pinouts 2024-12-14.pdf
new file mode 100644
index 000000000..de87af141
--- /dev/null
+++ b/variants/diy/nrf52_promicro_diy_tcxo/Schematic_Pro-Micro_Pinouts 2024-12-14.pdf	
@@ -0,0 +1,9836 @@
+%PDF-1.4
+%߬
+3 0 obj
+<>
+endobj
+4 0 obj
+<<
+/Length 102720
+>>
+stream
+0.20 w
+0 G
+2 J
+0 j
+100 M
+1.00 g
+[] 0 d
+0.00 826.80 1169.00 -826.80 re
+f
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+216.000 806.000 m 
+216.000 816.000 l
+216.000 20.000 m 
+216.000 10.000 l
+412.000 806.000 m 
+412.000 816.000 l
+412.000 20.000 m 
+412.000 10.000 l
+608.000 806.000 m 
+608.000 816.000 l
+608.000 20.000 m 
+608.000 10.000 l
+804.000 806.000 m 
+804.000 816.000 l
+804.000 20.000 m 
+804.000 10.000 l
+1000.000 806.000 m 
+1000.000 816.000 l
+1000.000 20.000 m 
+1000.000 10.000 l
+20.000 610.000 m 
+10.000 610.000 l
+1149.000 610.000 m 
+1159.000 610.000 l
+20.000 414.000 m 
+10.000 414.000 l
+1149.000 414.000 m 
+1159.000 414.000 l
+20.000 218.000 m 
+10.000 218.000 l
+1149.000 218.000 m 
+1159.000 218.000 l
+20.000 22.000 m 
+10.000 22.000 l
+1149.000 22.000 m 
+1159.000 22.000 l
+S
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+11.50 708.00 Td
+(A) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+1150.50 708.00 Td
+(A) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+11.50 512.00 Td
+(B) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+1150.50 512.00 Td
+(B) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+11.50 316.00 Td
+(C) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+1150.50 316.00 Td
+(C) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+11.50 120.00 Td
+(D) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+1150.50 120.00 Td
+(D) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+118.00 807.50 Td
+(1) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+118.00 11.50 Td
+(1) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+314.00 807.50 Td
+(2) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+314.00 11.50 Td
+(2) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+510.00 807.50 Td
+(3) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+510.00 11.50 Td
+(3) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+706.00 807.50 Td
+(4) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+706.00 11.50 Td
+(4) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+902.00 807.50 Td
+(5) Tj
+ET
+10.00 w
+BT
+/F1 9 Tf
+9.00 TL
+0.533 0.000 0.000 rg
+902.00 11.50 Td
+(5) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+20.00 806.00 1129.00 -786.00 re
+S
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+10.00 816.00 1149.00 -806.00 re
+S
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+705.00 100.00 444.00 -80.00 re
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+705.100 60.750 m 
+1148.630 60.750 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+809.630 40.750 m 
+1148.630 40.750 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+1069.610 99.930 m 
+1069.630 60.750 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+1069.630 60.750 m 
+1069.630 40.750 l
+S
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+710.00 87.00 Td
+(TITLE:) Tj
+ET
+10.00 w
+BT
+/F1 13 Tf
+13.00 TL
+0.000 0.000 1.000 rg
+767.62 74.41 Td
+(Pro-Micro Pinouts) Tj
+ET
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+1074.62 73.75 Td
+(REV:) Tj
+ET
+10.00 w
+BT
+/F1 12 Tf
+12.00 TL
+0.000 0.000 1.000 rg
+1112.62 73.75 Td
+(1.0) Tj
+ET
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+814.62 25.00 Td
+(Date:) Tj
+ET
+10.00 w
+BT
+/F1 12 Tf
+12.00 TL
+0.000 0.000 1.000 rg
+861.62 24.52 Td
+(2024-12-17) Tj
+ET
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+1073.62 45.00 Td
+(Sheet:) Tj
+ET
+10.00 w
+BT
+/F1 12 Tf
+12.00 TL
+0.000 0.000 1.000 rg
+1118.62 44.52 Td
+(1/1) Tj
+ET
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+953.62 24.75 Td
+(Drawn By:) Tj
+ET
+10.00 w
+BT
+/F1 11 Tf
+11.00 TL
+0.533 0.000 0.000 rg
+814.62 46.75 Td
+(Company:) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+809.630 60.750 m 
+809.630 20.750 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+541.000 684.000 m 
+549.000 676.000 l
+549.000 684.000 m 
+541.000 676.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+665.000 680.000 m 
+635.000 680.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+986.000 649.000 m 
+994.000 641.000 l
+994.000 649.000 m 
+986.000 641.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+541.000 614.000 m 
+549.000 606.000 l
+549.000 614.000 m 
+541.000 606.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+541.000 624.000 m 
+549.000 616.000 l
+549.000 624.000 m 
+541.000 616.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+541.000 644.000 m 
+549.000 636.000 l
+549.000 644.000 m 
+541.000 636.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+631.000 634.000 m 
+639.000 626.000 l
+639.000 634.000 m 
+631.000 626.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 804.82 611.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+830.000 615.000 m 
+840.000 615.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+830.000 610.000 m 
+830.000 620.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 797.50 621.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+830.000 625.000 m 
+840.000 625.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+830.000 634.000 m 
+830.000 616.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+828.000 631.000 m 
+828.000 619.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+826.000 628.000 m 
+826.000 622.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+824.000 626.000 m 
+824.000 624.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 1006.50 651.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1000.000 655.000 m 
+990.000 655.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1000.000 646.000 m 
+1000.000 664.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1002.000 649.000 m 
+1002.000 661.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1004.000 652.000 m 
+1004.000 658.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1006.000 654.000 m 
+1006.000 656.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 1011.94 671.15 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+990.000 675.000 m 
+995.000 680.000 l
+1010.000 680.000 l
+1010.000 670.000 l
+995.000 670.000 l
+990.000 675.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 797.25 651.75 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+840.000 655.000 m 
+835.000 650.000 l
+820.000 650.000 l
+820.000 660.000 l
+835.000 660.000 l
+840.000 655.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 804.69 631.45 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+840.000 635.000 m 
+835.000 630.000 l
+820.000 630.000 l
+820.000 640.000 l
+835.000 640.000 l
+840.000 635.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 791.48 661.75 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+840.000 665.000 m 
+835.000 660.000 l
+820.000 660.000 l
+820.000 670.000 l
+835.000 670.000 l
+840.000 665.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 791.41 671.75 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+840.000 675.000 m 
+835.000 670.000 l
+820.000 670.000 l
+820.000 680.000 l
+835.000 680.000 l
+840.000 675.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 790.06 641.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+840.000 645.000 m 
+835.000 640.000 l
+820.000 640.000 l
+820.000 650.000 l
+835.000 650.000 l
+840.000 645.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 1011.92 661.15 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+990.000 665.000 m 
+995.000 670.000 l
+1010.000 670.000 l
+1010.000 660.000 l
+995.000 660.000 l
+990.000 665.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+908.96 708.00 Td
+(Seeed-wio-SX1262) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+908.96 717.00 Td
+(SEEED_WIO-SX1262) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 682.00 Td
+(RF_SW) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 686.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 685.000 m 
+860.000 685.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 672.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 676.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 675.000 m 
+860.000 675.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 662.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 666.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 665.000 m 
+860.000 665.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 652.00 Td
+(CLK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 656.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 655.000 m 
+860.000 655.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 642.00 Td
+(RST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 646.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 645.000 m 
+860.000 645.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 632.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 636.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 635.000 m 
+860.000 635.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 622.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 626.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 625.000 m 
+860.000 625.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+862.00 612.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+849.28 616.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+840.000 615.000 m 
+860.000 615.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+949.58 642.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+975.00 646.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+990.000 645.000 m 
+970.000 645.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+947.36 652.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+975.00 656.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+990.000 655.000 m 
+970.000 655.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+943.57 662.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+975.00 666.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+990.000 665.000 m 
+970.000 665.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+944.49 672.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+975.00 676.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+990.000 675.000 m 
+970.000 675.000 l
+S
+2 J
+0 j
+100 M
+1.00 w
+0.00 G
+[] 0 d
+860.00 705.00 110.00 -110.00 re
+S
+1.00 w
+0.00 G
+[] 0 d
+965.00 615.00 m 965.00 623.28 958.28 630.00 950.00 630.00 c
+941.72 630.00 935.00 623.28 935.00 615.00 c
+935.00 606.72 941.72 600.00 950.00 600.00 c
+958.28 600.00 965.00 606.72 965.00 615.00 c
+S
+2 J
+0 j
+100 M
+1.00 w
+0.00 G
+[] 0 d
+930.00 635.00 40.00 -40.00 re
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+535.000 660.000 m 
+545.000 660.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 499.82 655.93 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+525.000 660.000 m 
+535.000 660.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+525.000 655.000 m 
+525.000 665.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+520.000 670.000 m 
+545.000 670.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 652.00 699.09 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+665.000 690.000 m 
+665.000 680.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+674.000 690.000 m 
+656.000 690.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+671.000 692.000 m 
+659.000 692.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+668.000 694.000 m 
+662.000 694.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+666.000 696.000 m 
+664.000 696.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 507.00 689.09 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+520.000 680.000 m 
+520.000 670.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+529.000 680.000 m 
+511.000 680.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+526.000 682.000 m 
+514.000 682.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+523.000 684.000 m 
+517.000 684.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+521.000 686.000 m 
+519.000 686.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 622.00 582.76 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+635.000 600.000 m 
+635.000 610.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+626.000 600.000 m 
+644.000 600.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+629.000 598.000 m 
+641.000 598.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+632.000 596.000 m 
+638.000 596.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+634.000 594.000 m 
+636.000 594.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 656.92 616.15 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+635.000 620.000 m 
+640.000 625.000 l
+655.000 625.000 l
+655.000 615.000 l
+640.000 615.000 l
+635.000 620.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 656.55 636.15 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+635.000 640.000 m 
+640.000 645.000 l
+655.000 645.000 l
+655.000 635.000 l
+640.000 635.000 l
+635.000 640.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 656.92 646.15 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+635.000 650.000 m 
+640.000 655.000 l
+655.000 655.000 l
+655.000 645.000 l
+640.000 645.000 l
+635.000 650.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 656.85 656.15 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+635.000 660.000 m 
+640.000 665.000 l
+655.000 665.000 l
+655.000 655.000 l
+640.000 655.000 l
+635.000 660.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 657.00 666.45 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+635.000 670.000 m 
+640.000 675.000 l
+655.000 675.000 l
+655.000 665.000 l
+640.000 665.000 l
+635.000 670.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 504.19 626.40 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+545.000 630.000 m 
+540.000 625.000 l
+525.000 625.000 l
+525.000 635.000 l
+540.000 635.000 l
+545.000 630.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 495.06 646.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+545.000 650.000 m 
+540.000 645.000 l
+525.000 645.000 l
+525.000 655.000 l
+540.000 655.000 l
+545.000 650.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+584.95 693.33 Td
+(RA-01SH) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+584.95 702.33 Td
+(HT-RA62) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+557.000 690.000 m 
+623.000 690.000 l
+624.105 690.000 625.000 689.105 625.000 688.000 c
+625.000 602.000 l
+625.000 600.895 623.895 600.000 623.000 600.000 c
+557.000 600.000 l
+555.895 600.000 555.000 601.105 555.000 602.000 c
+555.000 688.000 l
+555.000 689.105 556.105 690.000 557.000 690.000 c
+S
+1.00 w
+0.53 0.00 0.00 RG
+0.53 0.00 0.00 rg
+[] 0 d
+561.50 685.00 m 561.50 685.83 560.83 686.50 560.00 686.50 c
+559.17 686.50 558.50 685.83 558.50 685.00 c
+558.50 684.17 559.17 683.50 560.00 683.50 c
+560.83 683.50 561.50 684.17 561.50 685.00 c
+B
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 676.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 681.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 680.000 m 
+555.000 680.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+558.70 666.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+548.78 671.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+545.000 670.000 m 
+555.000 670.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 656.00 Td
+(3.3V) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 661.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 660.000 m 
+555.000 660.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 646.00 Td
+(RESET) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 651.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 650.000 m 
+555.000 650.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 636.00 Td
+(TXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 641.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 640.000 m 
+555.000 640.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 626.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 631.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 630.000 m 
+555.000 630.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 616.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 621.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 620.000 m 
+555.000 620.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+558.70 606.00 Td
+(DIO3) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+548.78 611.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 610.000 m 
+555.000 610.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+600.66 606.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+625.50 611.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+635.000 610.000 m 
+625.000 610.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+596.87 616.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 621.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 620.000 m 
+625.000 620.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+596.46 626.00 Td
+(RXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 631.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 630.000 m 
+625.000 630.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+602.64 636.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 641.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 640.000 m 
+625.000 640.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+596.71 646.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 651.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 650.000 m 
+625.000 650.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+596.71 656.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 661.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 660.000 m 
+625.000 660.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+602.27 666.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+625.50 671.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+635.000 670.000 m 
+625.000 670.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+600.66 676.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+625.50 681.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+635.000 680.000 m 
+625.000 680.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+153.95 479.05 Td
+(AMC-U_FL) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+153.95 488.16 Td
+(U6) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+165.00 465.00 20.00 -20.00 re
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+0.00 1.00 -1.00 0.00 174.00 434.29 Tm
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+175.000 425.000 m 
+175.000 445.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+159.28 456.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+155.000 455.000 m 
+165.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+185.00 456.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+195.000 455.000 m 
+185.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+0.00 1.00 -1.00 0.00 174.00 465.00 Tm
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+175.000 475.000 m 
+175.000 465.000 l
+S
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+177.00 455.00 m 177.00 456.10 176.10 457.00 175.00 457.00 c
+173.90 457.00 173.00 456.10 173.00 455.00 c
+173.00 453.90 173.90 453.00 175.00 453.00 c
+176.10 453.00 177.00 453.90 177.00 455.00 c
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+175.000 453.000 m 
+175.000 445.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+506.000 394.000 m 
+514.000 386.000 l
+514.000 394.000 m 
+506.000 386.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+646.000 394.000 m 
+654.000 386.000 l
+654.000 394.000 m 
+646.000 386.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 666.50 415.93 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+660.000 420.000 m 
+650.000 420.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+660.000 411.000 m 
+660.000 429.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+662.000 414.000 m 
+662.000 426.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+664.000 417.000 m 
+664.000 423.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+666.000 419.000 m 
+666.000 421.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+650.000 430.000 m 
+650.000 400.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+796.000 389.000 m 
+804.000 381.000 l
+804.000 389.000 m 
+796.000 381.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+573.96 503.33 Td
+(E22-900M22S) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+573.96 512.33 Td
+(E22-900M22S) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 377.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 381.00 Td
+(22) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 380.000 m 
+530.000 380.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 387.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 391.00 Td
+(21) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 390.000 m 
+530.000 390.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 397.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 401.00 Td
+(20) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 400.000 m 
+530.000 400.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 417.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 421.00 Td
+(19) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 420.000 m 
+530.000 420.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 427.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 431.00 Td
+(18) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 430.000 m 
+530.000 430.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 437.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 441.00 Td
+(17) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 440.000 m 
+530.000 440.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 447.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 451.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 450.000 m 
+530.000 450.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 457.00 Td
+(NRST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 461.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 460.000 m 
+530.000 460.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 467.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 471.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 470.000 m 
+530.000 470.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 477.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 481.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 480.000 m 
+530.000 480.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+532.00 487.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+513.57 491.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+510.000 490.000 m 
+530.000 490.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 487.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 491.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 490.000 m 
+630.000 490.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 477.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 481.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 480.000 m 
+630.000 480.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+609.29 467.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 471.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 470.000 m 
+630.000 470.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+604.49 457.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 461.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 460.000 m 
+630.000 460.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+603.87 447.00 Td
+(TXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 451.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 450.000 m 
+630.000 450.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+603.16 437.00 Td
+(RXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 441.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 440.000 m 
+630.000 440.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 427.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 431.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 430.000 m 
+630.000 430.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 417.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 421.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 420.000 m 
+630.000 420.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 397.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 401.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 400.000 m 
+630.000 400.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 387.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 391.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 390.000 m 
+630.000 390.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+607.36 377.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+635.00 381.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+650.000 380.000 m 
+630.000 380.000 l
+S
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+532.000 500.000 m 
+628.000 500.000 l
+629.105 500.000 630.000 499.105 630.000 498.000 c
+630.000 362.000 l
+630.000 360.895 628.895 360.000 628.000 360.000 c
+532.000 360.000 l
+530.895 360.000 530.000 361.105 530.000 362.000 c
+530.000 498.000 l
+530.000 499.105 531.105 500.000 532.000 500.000 c
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+863.96 498.33 Td
+(E22-900M30S) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+863.96 507.33 Td
+(E22-900M30S) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+822.000 495.000 m 
+918.000 495.000 l
+919.105 495.000 920.000 494.105 920.000 493.000 c
+920.000 357.000 l
+920.000 355.895 918.895 355.000 918.000 355.000 c
+822.000 355.000 l
+820.895 355.000 820.000 356.105 820.000 357.000 c
+820.000 493.000 l
+820.000 494.105 821.105 495.000 822.000 495.000 c
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 372.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 376.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 375.000 m 
+920.000 375.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 382.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 386.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 385.000 m 
+920.000 385.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 392.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 396.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 395.000 m 
+920.000 395.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 412.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 416.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 415.000 m 
+920.000 415.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 422.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 426.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 425.000 m 
+920.000 425.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+893.16 432.00 Td
+(RXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 436.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 435.000 m 
+920.000 435.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+893.87 442.00 Td
+(TXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 446.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 445.000 m 
+920.000 445.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+894.49 452.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 456.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 455.000 m 
+920.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+899.29 462.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 466.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 465.000 m 
+920.000 465.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+899.29 472.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 476.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 475.000 m 
+920.000 475.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+897.36 482.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+925.00 486.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+940.000 485.000 m 
+920.000 485.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 482.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 486.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 485.000 m 
+820.000 485.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 472.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 476.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 475.000 m 
+820.000 475.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 462.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 466.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 465.000 m 
+820.000 465.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 452.00 Td
+(NRST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 456.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 455.000 m 
+820.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 442.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 446.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 445.000 m 
+820.000 445.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 432.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 436.00 Td
+(17) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 435.000 m 
+820.000 435.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 422.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 426.00 Td
+(18) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 425.000 m 
+820.000 425.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 412.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 416.00 Td
+(19) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 415.000 m 
+820.000 415.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 392.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 396.00 Td
+(20) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 395.000 m 
+820.000 395.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 382.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 386.00 Td
+(21) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 385.000 m 
+820.000 385.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+822.00 372.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+803.57 376.00 Td
+(22) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+800.000 375.000 m 
+820.000 375.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+293.99 488.33 Td
+(E22-400MM22S) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+293.99 497.33 Td
+(E22-900MM22S) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+267.000 485.000 m 
+333.000 485.000 l
+334.105 485.000 335.000 484.105 335.000 483.000 c
+335.000 377.000 l
+335.000 375.895 333.895 375.000 333.000 375.000 c
+267.000 375.000 l
+265.895 375.000 265.000 376.105 265.000 377.000 c
+265.000 483.000 l
+265.000 484.105 266.105 485.000 267.000 485.000 c
+S
+1.00 w
+0.53 0.00 0.00 RG
+0.53 0.00 0.00 rg
+[] 0 d
+271.50 480.00 m 271.50 480.83 270.83 481.50 270.00 481.50 c
+269.17 481.50 268.50 480.83 268.50 480.00 c
+268.50 479.17 269.17 478.50 270.00 478.50 c
+270.83 478.50 271.50 479.17 271.50 480.00 c
+B
+BT
+/F1 9 Tf
+9.00 TL
+1.000 0.000 0.000 rg
+268.70 471.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+1.000 0.000 0.000 rg
+258.79 476.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+1.00 0.00 0.00 RG
+[] 0 d
+255.000 475.000 m 
+265.000 475.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+268.70 461.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+258.79 466.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+255.000 465.000 m 
+265.000 465.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 451.00 Td
+(NRST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 456.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 455.000 m 
+265.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 441.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 446.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 445.000 m 
+265.000 445.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 431.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 436.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 435.000 m 
+265.000 435.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 421.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 426.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 425.000 m 
+265.000 425.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+268.70 411.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+258.79 416.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+255.000 415.000 m 
+265.000 415.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 401.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 406.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 405.000 m 
+265.000 405.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 391.00 Td
+(TXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+258.79 396.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 395.000 m 
+265.000 395.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+268.70 381.00 Td
+(RXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+253.07 386.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+255.000 385.000 m 
+265.000 385.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+306.87 381.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 386.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 385.000 m 
+335.000 385.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+306.71 391.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 396.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 395.000 m 
+335.000 395.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+306.71 401.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 406.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 405.000 m 
+335.000 405.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+312.27 411.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 416.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 415.000 m 
+335.000 415.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+312.64 421.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 426.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 425.000 m 
+335.000 425.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+310.66 431.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+335.50 436.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+345.000 435.000 m 
+335.000 435.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+318.29 441.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 446.00 Td
+(17) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 445.000 m 
+335.000 445.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+307.79 451.00 Td
+(DIO3) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 456.00 Td
+(18) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 455.000 m 
+335.000 455.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+307.79 461.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 466.00 Td
+(19) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 465.000 m 
+335.000 465.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+307.79 471.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+335.50 476.00 Td
+(20) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+345.000 475.000 m 
+335.000 475.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 366.70 381.60 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 385.000 m 
+350.000 390.000 l
+365.000 390.000 l
+365.000 380.000 l
+350.000 380.000 l
+345.000 385.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 203.19 381.40 Tm
+(RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+255.000 385.000 m 
+250.000 380.000 l
+235.000 380.000 l
+235.000 390.000 l
+250.000 390.000 l
+255.000 385.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 366.71 421.60 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 425.000 m 
+350.000 430.000 l
+365.000 430.000 l
+365.000 420.000 l
+350.000 420.000 l
+345.000 425.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.00 391.60 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 395.000 m 
+350.000 400.000 l
+365.000 400.000 l
+365.000 390.000 l
+350.000 390.000 l
+345.000 395.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.00 401.60 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 405.000 m 
+350.000 410.000 l
+365.000 410.000 l
+365.000 400.000 l
+350.000 400.000 l
+345.000 405.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.00 411.60 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 415.000 m 
+350.000 420.000 l
+365.000 420.000 l
+365.000 410.000 l
+350.000 410.000 l
+345.000 415.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.01 461.15 Tm
+(DIO2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 465.000 m 
+350.000 470.000 l
+365.000 470.000 l
+365.000 460.000 l
+350.000 460.000 l
+345.000 465.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.00 471.60 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 475.000 m 
+350.000 480.000 l
+365.000 480.000 l
+365.000 470.000 l
+350.000 470.000 l
+345.000 475.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 203.74 391.40 Tm
+(TXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+255.000 395.000 m 
+250.000 390.000 l
+235.000 390.000 l
+235.000 400.000 l
+250.000 400.000 l
+255.000 395.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 205.06 451.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+255.000 455.000 m 
+250.000 450.000 l
+235.000 450.000 l
+235.000 460.000 l
+250.000 460.000 l
+255.000 455.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 367.01 451.15 Tm
+(DIO3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+345.000 455.000 m 
+350.000 460.000 l
+365.000 460.000 l
+365.000 450.000 l
+350.000 450.000 l
+345.000 455.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 460.06 456.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 460.000 m 
+505.000 455.000 l
+490.000 455.000 l
+490.000 465.000 l
+505.000 465.000 l
+510.000 460.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 671.71 446.60 Tm
+(TXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+650.000 450.000 m 
+655.000 455.000 l
+670.000 455.000 l
+670.000 445.000 l
+655.000 445.000 l
+650.000 450.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 469.19 476.40 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 480.000 m 
+505.000 475.000 l
+490.000 475.000 l
+490.000 485.000 l
+505.000 485.000 l
+510.000 480.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 672.01 456.15 Tm
+(DIO2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+650.000 460.000 m 
+655.000 465.000 l
+670.000 465.000 l
+670.000 455.000 l
+655.000 455.000 l
+650.000 460.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 474.69 416.40 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 420.000 m 
+505.000 415.000 l
+490.000 415.000 l
+490.000 425.000 l
+505.000 425.000 l
+510.000 420.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 460.61 436.40 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 440.000 m 
+505.000 435.000 l
+490.000 435.000 l
+490.000 445.000 l
+505.000 445.000 l
+510.000 440.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 460.61 446.40 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 450.000 m 
+505.000 445.000 l
+490.000 445.000 l
+490.000 455.000 l
+505.000 455.000 l
+510.000 450.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 466.77 426.40 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 430.000 m 
+505.000 425.000 l
+490.000 425.000 l
+490.000 435.000 l
+505.000 435.000 l
+510.000 430.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 671.71 436.60 Tm
+(RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+650.000 440.000 m 
+655.000 445.000 l
+670.000 445.000 l
+670.000 435.000 l
+655.000 435.000 l
+650.000 440.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 458.85 466.40 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+510.000 470.000 m 
+505.000 465.000 l
+490.000 465.000 l
+490.000 475.000 l
+505.000 475.000 l
+510.000 470.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 467.50 395.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 400.000 m 
+510.000 400.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 409.000 m 
+500.000 391.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+498.000 406.000 m 
+498.000 394.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+496.000 403.000 m 
+496.000 397.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+494.000 401.000 m 
+494.000 399.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 467.50 375.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 380.000 m 
+510.000 380.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 389.000 m 
+500.000 371.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+498.000 386.000 m 
+498.000 374.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+496.000 383.000 m 
+496.000 377.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+494.000 381.000 m 
+494.000 379.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 637.00 352.76 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+650.000 370.000 m 
+650.000 380.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+641.000 370.000 m 
+659.000 370.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+644.000 368.000 m 
+656.000 368.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+647.000 366.000 m 
+653.000 366.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+649.000 364.000 m 
+651.000 364.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 637.00 509.13 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+650.000 500.000 m 
+650.000 490.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+659.000 500.000 m 
+641.000 500.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+656.000 502.000 m 
+644.000 502.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+653.000 504.000 m 
+647.000 504.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+651.000 506.000 m 
+649.000 506.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 467.50 485.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 490.000 m 
+510.000 490.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+500.000 499.000 m 
+500.000 481.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+498.000 496.000 m 
+498.000 484.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+496.000 493.000 m 
+496.000 487.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+494.000 491.000 m 
+494.000 489.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 361.50 430.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 435.000 m 
+345.000 435.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 426.000 m 
+355.000 444.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+357.000 429.000 m 
+357.000 441.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+359.000 432.000 m 
+359.000 438.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+361.000 434.000 m 
+361.000 436.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 212.50 410.93 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+245.000 415.000 m 
+255.000 415.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+245.000 424.000 m 
+245.000 406.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+243.000 421.000 m 
+243.000 409.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+241.000 418.000 m 
+241.000 412.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+239.000 416.000 m 
+239.000 414.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 212.50 460.93 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+245.000 465.000 m 
+255.000 465.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+245.000 474.000 m 
+245.000 456.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+243.000 471.000 m 
+243.000 459.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+241.000 468.000 m 
+241.000 462.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+239.000 466.000 m 
+239.000 464.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+940.000 370.000 m 
+940.000 425.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 757.50 480.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 485.000 m 
+800.000 485.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 494.000 m 
+790.000 476.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+788.000 491.000 m 
+788.000 479.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+786.000 488.000 m 
+786.000 482.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+784.000 486.000 m 
+784.000 484.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 927.00 504.09 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+940.000 495.000 m 
+940.000 485.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+949.000 495.000 m 
+931.000 495.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+946.000 497.000 m 
+934.000 497.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+943.000 499.000 m 
+937.000 499.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+941.000 501.000 m 
+939.000 501.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 757.50 370.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 375.000 m 
+800.000 375.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 384.000 m 
+790.000 366.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+788.000 381.000 m 
+788.000 369.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+786.000 378.000 m 
+786.000 372.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+784.000 376.000 m 
+784.000 374.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 757.50 390.92 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 395.000 m 
+800.000 395.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+790.000 404.000 m 
+790.000 386.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+788.000 401.000 m 
+788.000 389.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+786.000 398.000 m 
+786.000 392.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+784.000 396.000 m 
+784.000 394.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 748.85 461.40 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 465.000 m 
+795.000 460.000 l
+780.000 460.000 l
+780.000 470.000 l
+795.000 470.000 l
+800.000 465.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 961.71 431.60 Tm
+(RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+940.000 435.000 m 
+945.000 440.000 l
+960.000 440.000 l
+960.000 430.000 l
+945.000 430.000 l
+940.000 435.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 756.77 421.40 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 425.000 m 
+795.000 420.000 l
+780.000 420.000 l
+780.000 430.000 l
+795.000 430.000 l
+800.000 425.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 750.61 441.40 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 445.000 m 
+795.000 440.000 l
+780.000 440.000 l
+780.000 450.000 l
+795.000 450.000 l
+800.000 445.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 750.61 431.40 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 435.000 m 
+795.000 430.000 l
+780.000 430.000 l
+780.000 440.000 l
+795.000 440.000 l
+800.000 435.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 764.69 411.40 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 415.000 m 
+795.000 410.000 l
+780.000 410.000 l
+780.000 420.000 l
+795.000 420.000 l
+800.000 415.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 962.01 451.15 Tm
+(DIO2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+940.000 455.000 m 
+945.000 460.000 l
+960.000 460.000 l
+960.000 450.000 l
+945.000 450.000 l
+940.000 455.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 759.19 471.40 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 475.000 m 
+795.000 470.000 l
+780.000 470.000 l
+780.000 480.000 l
+795.000 480.000 l
+800.000 475.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 961.71 441.60 Tm
+(TXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+940.000 445.000 m 
+945.000 450.000 l
+960.000 450.000 l
+960.000 440.000 l
+945.000 440.000 l
+940.000 445.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 750.06 451.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+800.000 455.000 m 
+795.000 450.000 l
+780.000 450.000 l
+780.000 460.000 l
+795.000 460.000 l
+800.000 455.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 927.00 342.76 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+940.000 360.000 m 
+940.000 370.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+931.000 360.000 m 
+949.000 360.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+934.000 358.000 m 
+946.000 358.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+937.000 356.000 m 
+943.000 356.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+939.000 354.000 m 
+941.000 354.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 243.00 487.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+255.000 485.000 m 
+255.000 475.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+250.000 485.000 m 
+260.000 485.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 660.50 465.93 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+660.000 470.000 m 
+650.000 470.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+660.000 475.000 m 
+660.000 465.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+175.000 425.000 m 
+210.000 425.000 l
+255.000 425.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 142.00 429.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+155.000 445.000 m 
+155.000 455.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+146.000 445.000 m 
+164.000 445.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+149.000 443.000 m 
+161.000 443.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+152.000 441.000 m 
+158.000 441.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+154.000 439.000 m 
+156.000 439.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 182.00 428.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+195.000 445.000 m 
+195.000 455.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+186.000 445.000 m 
+204.000 445.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+189.000 443.000 m 
+201.000 443.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+192.000 441.000 m 
+198.000 441.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+194.000 439.000 m 
+196.000 439.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 950.50 460.92 Tm
+(+5V) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+950.000 465.000 m 
+940.000 465.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+950.000 470.000 m 
+950.000 460.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+650.000 490.000 m 
+650.000 480.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+940.000 465.000 m 
+940.000 475.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+231.000 294.000 m 
+239.000 286.000 l
+239.000 294.000 m 
+231.000 286.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+371.000 244.000 m 
+379.000 236.000 l
+379.000 244.000 m 
+371.000 236.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+371.000 284.000 m 
+379.000 276.000 l
+379.000 284.000 m 
+371.000 276.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+371.000 274.000 m 
+379.000 266.000 l
+379.000 274.000 m 
+371.000 266.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+231.000 204.000 m 
+239.000 196.000 l
+239.000 204.000 m 
+231.000 196.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+371.000 204.000 m 
+379.000 196.000 l
+379.000 204.000 m 
+371.000 196.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 397.71 246.28 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+375.000 250.000 m 
+380.000 255.000 l
+395.000 255.000 l
+395.000 245.000 l
+380.000 245.000 l
+375.000 250.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 397.00 256.60 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+375.000 260.000 m 
+380.000 265.000 l
+395.000 265.000 l
+395.000 255.000 l
+380.000 255.000 l
+375.000 260.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 183.85 236.40 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+235.000 240.000 m 
+230.000 235.000 l
+215.000 235.000 l
+215.000 245.000 l
+230.000 245.000 l
+235.000 240.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 199.69 246.40 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+235.000 250.000 m 
+230.000 245.000 l
+215.000 245.000 l
+215.000 255.000 l
+230.000 255.000 l
+235.000 250.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 185.61 266.40 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+235.000 270.000 m 
+230.000 265.000 l
+215.000 265.000 l
+215.000 275.000 l
+230.000 275.000 l
+235.000 270.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 191.77 256.40 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+235.000 260.000 m 
+230.000 255.000 l
+215.000 255.000 l
+215.000 265.000 l
+230.000 265.000 l
+235.000 260.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 185.61 276.40 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+235.000 280.000 m 
+230.000 275.000 l
+215.000 275.000 l
+215.000 285.000 l
+230.000 285.000 l
+235.000 280.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+298.96 313.33 Td
+(E80-900M2213S) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+298.96 322.33 Td
+(E80-900M2213S) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 187.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 191.00 Td
+(22) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 190.000 m 
+255.000 190.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 197.00 Td
+(ANT_2.4) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 201.00 Td
+(21) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 200.000 m 
+255.000 200.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 207.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 211.00 Td
+(20) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 210.000 m 
+255.000 210.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 227.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 231.00 Td
+(19) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 230.000 m 
+255.000 230.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 237.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 241.00 Td
+(18) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 240.000 m 
+255.000 240.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 247.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 251.00 Td
+(17) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 250.000 m 
+255.000 250.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 257.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 261.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 260.000 m 
+255.000 260.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 267.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 271.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 270.000 m 
+255.000 270.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 277.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 281.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 280.000 m 
+255.000 280.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 287.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 291.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 290.000 m 
+255.000 290.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+257.00 297.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+238.57 301.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+235.000 300.000 m 
+255.000 300.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+332.36 297.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 301.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 300.000 m 
+355.000 300.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+334.29 287.00 Td
+(VCC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 291.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 290.000 m 
+355.000 290.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+329.49 277.00 Td
+(DIO7) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 281.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 280.000 m 
+355.000 280.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+329.49 267.00 Td
+(DIO8) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 271.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 270.000 m 
+355.000 270.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+329.49 257.00 Td
+(DIO9) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 261.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 260.000 m 
+355.000 260.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+328.32 247.00 Td
+(NRST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 251.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 250.000 m 
+355.000 250.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+339.99 237.00 Td
+(NC) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 241.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 240.000 m 
+355.000 240.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+332.36 227.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 231.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 230.000 m 
+355.000 230.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+332.36 207.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 211.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 210.000 m 
+355.000 210.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+311.72 197.00 Td
+(ANT_900) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 201.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 200.000 m 
+355.000 200.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+332.36 187.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+360.00 191.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+375.000 190.000 m 
+355.000 190.000 l
+S
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+257.000 310.000 m 
+353.000 310.000 l
+354.105 310.000 355.000 309.105 355.000 308.000 c
+355.000 172.000 l
+355.000 170.895 353.895 170.000 353.000 170.000 c
+257.000 170.000 l
+255.895 170.000 255.000 171.105 255.000 172.000 c
+255.000 308.000 l
+255.000 309.105 256.105 310.000 257.000 310.000 c
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 362.00 163.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+375.000 180.000 m 
+375.000 190.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+366.000 180.000 m 
+384.000 180.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+369.000 178.000 m 
+381.000 178.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+372.000 176.000 m 
+378.000 176.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+374.000 174.000 m 
+376.000 174.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 391.50 206.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 210.000 m 
+375.000 210.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 201.000 m 
+385.000 219.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+387.000 204.000 m 
+387.000 216.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+389.000 207.000 m 
+389.000 213.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+391.000 209.000 m 
+391.000 211.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 391.50 226.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 230.000 m 
+375.000 230.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 221.000 m 
+385.000 239.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+387.000 224.000 m 
+387.000 236.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+389.000 227.000 m 
+389.000 233.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+391.000 229.000 m 
+391.000 231.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 391.50 296.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 300.000 m 
+375.000 300.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 291.000 m 
+385.000 309.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+387.000 294.000 m 
+387.000 306.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+389.000 297.000 m 
+389.000 303.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+391.000 299.000 m 
+391.000 301.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 192.50 296.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 300.000 m 
+235.000 300.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 309.000 m 
+225.000 291.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+223.000 306.000 m 
+223.000 294.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+221.000 303.000 m 
+221.000 297.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+219.000 301.000 m 
+219.000 299.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 192.50 226.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 230.000 m 
+235.000 230.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 239.000 m 
+225.000 221.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+223.000 236.000 m 
+223.000 224.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+221.000 233.000 m 
+221.000 227.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+219.000 231.000 m 
+219.000 229.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 192.50 206.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 210.000 m 
+235.000 210.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 219.000 m 
+225.000 201.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+223.000 216.000 m 
+223.000 204.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+221.000 213.000 m 
+221.000 207.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+219.000 211.000 m 
+219.000 209.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 192.50 186.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 190.000 m 
+235.000 190.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+225.000 199.000 m 
+225.000 181.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+223.000 196.000 m 
+223.000 184.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+221.000 193.000 m 
+221.000 187.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+219.000 191.000 m 
+219.000 189.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 386.00 286.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 290.000 m 
+375.000 290.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+385.000 295.000 m 
+385.000 285.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+160.000 675.000 m 
+160.000 680.000 l
+160.000 685.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 655.000 m 
+160.000 655.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 645.000 m 
+160.000 645.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 635.000 m 
+160.000 635.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 625.000 m 
+160.000 625.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 615.000 m 
+160.000 615.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+145.000 605.000 m 
+160.000 605.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 112.70 591.40 Tm
+(P1.06) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+160.000 595.000 m 
+155.000 590.000 l
+140.000 590.000 l
+140.000 600.000 l
+155.000 600.000 l
+160.000 595.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 112.70 701.40 Tm
+(P0.06) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+160.000 705.000 m 
+155.000 700.000 l
+140.000 700.000 l
+140.000 710.000 l
+155.000 710.000 l
+160.000 705.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 112.70 691.40 Tm
+(P0.08) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+160.000 695.000 m 
+155.000 690.000 l
+140.000 690.000 l
+140.000 700.000 l
+155.000 700.000 l
+160.000 695.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+417.00 632.75 Td
+(1.5M) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+417.00 641.75 Td
+(R2) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.63 0.00 0.00 RG
+[] 0 d
+405.00 655.00 10.00 -20.00 re
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+410.000 655.000 m 
+410.000 665.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+410.000 635.000 m 
+410.000 625.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+0.00 1.00 -1.00 0.00 413.70 727.50 Tm
+(Batt) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+410.000 705.000 m 
+405.000 710.000 l
+405.000 725.000 l
+415.000 725.000 l
+415.000 710.000 l
+410.000 705.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+186.000 549.000 m 
+194.000 541.000 l
+194.000 549.000 m 
+186.000 541.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+196.000 549.000 m 
+204.000 541.000 l
+204.000 549.000 m 
+196.000 541.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+206.000 549.000 m 
+214.000 541.000 l
+214.000 549.000 m 
+206.000 541.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+276.000 719.000 m 
+284.000 711.000 l
+284.000 719.000 m 
+276.000 711.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+156.000 719.000 m 
+164.000 711.000 l
+164.000 719.000 m 
+156.000 711.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 397.00 599.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+410.000 615.000 m 
+410.000 625.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+401.000 615.000 m 
+419.000 615.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+404.000 613.000 m 
+416.000 613.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+407.000 611.000 m 
+413.000 611.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+409.000 609.000 m 
+411.000 609.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+410.000 665.000 m 
+280.000 665.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+417.00 672.75 Td
+(1M) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+417.00 681.75 Td
+(R1) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.63 0.00 0.00 RG
+[] 0 d
+405.00 695.00 10.00 -20.00 re
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+410.000 695.000 m 
+410.000 705.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+410.000 675.000 m 
+410.000 665.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 685.000 m 
+280.000 685.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.01 681.07 Tm
+(RBtn) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 685.000 m 
+295.000 690.000 l
+310.000 690.000 l
+310.000 680.000 l
+295.000 680.000 l
+290.000 685.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 99.24 621.60 Tm
+(UBtn) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 625.000 m 
+140.000 620.000 l
+125.000 620.000 l
+125.000 630.000 l
+140.000 630.000 l
+145.000 625.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 117.50 676.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+150.000 680.000 m 
+160.000 680.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+150.000 689.000 m 
+150.000 671.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+148.000 686.000 m 
+148.000 674.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+146.000 683.000 m 
+146.000 677.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+144.000 681.000 m 
+144.000 679.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 595.000 m 
+280.000 595.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 655.000 m 
+280.000 655.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 605.000 m 
+280.000 605.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 625.000 m 
+280.000 625.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 92.64 631.40 Tm
+(GPSen) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 635.000 m 
+140.000 630.000 l
+125.000 630.000 l
+125.000 640.000 l
+140.000 640.000 l
+145.000 635.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 93.85 651.40 Tm
+(GPSrx) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 655.000 m 
+140.000 650.000 l
+125.000 650.000 l
+125.000 660.000 l
+140.000 660.000 l
+145.000 655.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 94.40 641.40 Tm
+(GPStx) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 645.000 m 
+140.000 640.000 l
+125.000 640.000 l
+125.000 650.000 l
+140.000 650.000 l
+145.000 645.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 615.000 m 
+280.000 615.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 635.000 m 
+280.000 635.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+290.000 645.000 m 
+280.000 645.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+345.000 695.000 m 
+280.000 695.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+345.000 675.000 m 
+280.000 675.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.00 601.60 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 605.000 m 
+295.000 610.000 l
+310.000 610.000 l
+310.000 600.000 l
+295.000 600.000 l
+290.000 605.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.50 591.60 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 595.000 m 
+295.000 600.000 l
+310.000 600.000 l
+310.000 590.000 l
+295.000 590.000 l
+290.000 595.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 356.00 671.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 675.000 m 
+345.000 675.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 680.000 m 
+355.000 670.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.00 621.60 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 625.000 m 
+295.000 630.000 l
+310.000 630.000 l
+310.000 620.000 l
+295.000 620.000 l
+290.000 625.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.00 631.60 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 635.000 m 
+295.000 640.000 l
+310.000 640.000 l
+310.000 630.000 l
+295.000 630.000 l
+290.000 635.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 312.00 641.60 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 645.000 m 
+295.000 650.000 l
+310.000 650.000 l
+310.000 640.000 l
+295.000 640.000 l
+290.000 645.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 311.84 611.60 Tm
+(SCk) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 615.000 m 
+295.000 620.000 l
+310.000 620.000 l
+310.000 610.000 l
+295.000 610.000 l
+290.000 615.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 311.70 651.60 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+290.000 655.000 m 
+295.000 660.000 l
+310.000 660.000 l
+310.000 650.000 l
+295.000 650.000 l
+290.000 655.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 361.50 691.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 695.000 m 
+345.000 695.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+355.000 686.000 m 
+355.000 704.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+357.000 689.000 m 
+357.000 701.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+359.000 692.000 m 
+359.000 698.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+361.000 694.000 m 
+361.000 696.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 302.50 701.30 Tm
+(Batt) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+280.000 705.000 m 
+285.000 710.000 l
+300.000 710.000 l
+300.000 700.000 l
+285.000 700.000 l
+280.000 705.000 l
+S
+10.00 w
+BT
+/F1 13 Tf
+13.00 TL
+0.000 0.000 1.000 rg
+1015.00 25.00 Td
+(Nom De Tom) Tj
+ET
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 647.00 251.60 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+625.000 255.000 m 
+630.000 260.000 l
+645.000 260.000 l
+645.000 250.000 l
+630.000 250.000 l
+625.000 255.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 513.00 297.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+525.000 295.000 m 
+525.000 285.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+520.000 295.000 m 
+530.000 295.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+625.000 175.000 m 
+625.000 215.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 612.00 149.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+625.000 165.000 m 
+625.000 175.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+616.000 165.000 m 
+634.000 165.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+619.000 163.000 m 
+631.000 163.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+622.000 161.000 m 
+628.000 161.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+624.000 159.000 m 
+626.000 159.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 474.33 201.85 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 205.000 m 
+520.000 200.000 l
+505.000 200.000 l
+505.000 210.000 l
+520.000 210.000 l
+525.000 205.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 473.74 191.85 Tm
+(RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 195.000 m 
+520.000 190.000 l
+505.000 190.000 l
+505.000 200.000 l
+520.000 200.000 l
+525.000 195.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 482.41 231.85 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 235.000 m 
+520.000 230.000 l
+505.000 230.000 l
+505.000 240.000 l
+520.000 240.000 l
+525.000 235.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 476.41 251.85 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 255.000 m 
+520.000 250.000 l
+505.000 250.000 l
+505.000 260.000 l
+520.000 260.000 l
+525.000 255.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 476.48 241.85 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 245.000 m 
+520.000 240.000 l
+505.000 240.000 l
+505.000 250.000 l
+520.000 250.000 l
+525.000 245.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 489.69 221.45 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 225.000 m 
+520.000 220.000 l
+505.000 220.000 l
+505.000 230.000 l
+520.000 230.000 l
+525.000 225.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 647.01 241.15 Tm
+(DIO2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+625.000 245.000 m 
+630.000 250.000 l
+645.000 250.000 l
+645.000 240.000 l
+630.000 240.000 l
+625.000 245.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 474.33 181.85 Tm
+(TXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 185.000 m 
+520.000 180.000 l
+505.000 180.000 l
+505.000 190.000 l
+520.000 190.000 l
+525.000 185.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 475.06 261.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+525.000 265.000 m 
+520.000 260.000 l
+505.000 260.000 l
+505.000 270.000 l
+520.000 270.000 l
+525.000 265.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+568.96 298.33 Td
+(SX1262_MOD) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+584.58 282.00 Td
+(ANT) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 286.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 285.000 m 
+605.000 285.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+568.96 307.33 Td
+(CORE_SX1262) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+582.36 202.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 206.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 205.000 m 
+605.000 205.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 192.00 Td
+(RXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+534.28 196.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 195.000 m 
+545.000 195.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 182.00 Td
+(TXEN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+534.28 186.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 185.000 m 
+545.000 185.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+579.49 242.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 246.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 245.000 m 
+605.000 245.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+579.49 252.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 256.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 255.000 m 
+605.000 255.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+582.36 192.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 196.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 195.000 m 
+605.000 195.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 282.00 Td
+(3V3) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+534.28 286.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 285.000 m 
+545.000 285.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 202.00 Td
+(BUSY) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+534.28 206.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 205.000 m 
+545.000 205.000 l
+S
+1.00 w
+0.53 0.00 0.00 RG
+545.00 265.00 m 545.00 266.66 543.66 268.00 542.00 268.00 c
+540.34 268.00 539.00 266.66 539.00 265.00 c
+539.00 263.34 540.34 262.00 542.00 262.00 c
+543.66 262.00 545.00 263.34 545.00 265.00 c
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 262.00 Td
+(RST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+528.57 266.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 265.000 m 
+539.000 265.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 252.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+528.57 256.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 255.000 m 
+545.000 255.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 242.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+528.57 246.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 245.000 m 
+545.000 245.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 232.000 m 
+548.000 235.000 l
+545.000 238.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 232.00 Td
+(CLK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+528.57 236.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 235.000 m 
+545.000 235.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+547.00 222.00 Td
+(CS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+528.57 226.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+525.000 225.000 m 
+545.000 225.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+582.36 182.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 186.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 185.000 m 
+605.000 185.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+582.36 212.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+610.00 216.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+625.000 215.000 m 
+605.000 215.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+550.000 295.000 m 
+600.000 295.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+605.000 290.000 m 
+605.000 180.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+600.000 175.000 m 
+550.000 175.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+0.00 g
+[] 0 d
+545.000 180.000 m 
+545.000 290.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 290.000 m 
+545.000 295.000 545.000 295.000 550.000 295.000 c
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+600.000 295.000 m 
+605.000 295.000 605.000 295.000 605.000 290.000 c
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+605.000 180.000 m 
+605.000 175.000 605.000 175.000 600.000 175.000 c
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+545.000 180.000 m 
+545.000 175.000 545.000 175.000 550.000 175.000 c
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 737.72 681.45 Tm
+(MCU_RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+820.000 685.000 m 
+815.000 680.000 l
+800.000 680.000 l
+800.000 690.000 l
+815.000 690.000 l
+820.000 685.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+1115.00 362.67 Td
+(100uF) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+1115.00 371.67 Td
+(C1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1113.000 373.000 m 
+1097.000 373.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+1105.000 365.000 m 
+1105.000 355.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1105.000 385.000 m 
+1105.000 377.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1097.000 377.000 m 
+1113.000 377.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+1105.000 385.000 m 
+1105.000 395.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1105.000 373.000 m 
+1105.000 365.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+1065.00 362.67 Td
+(100uF) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+1065.00 371.67 Td
+(C2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1063.000 373.000 m 
+1047.000 373.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+1055.000 365.000 m 
+1055.000 355.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1055.000 385.000 m 
+1055.000 377.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1047.000 377.000 m 
+1063.000 377.000 l
+S
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+1055.000 385.000 m 
+1055.000 395.000 l
+S
+1 J
+1 j
+1.00 w
+0.63 0.00 0.00 RG
+0.00 g
+[] 0 d
+1055.000 373.000 m 
+1055.000 365.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 1092.00 329.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1105.000 345.000 m 
+1105.000 355.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1096.000 345.000 m 
+1114.000 345.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1099.000 343.000 m 
+1111.000 343.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1102.000 341.000 m 
+1108.000 341.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1104.000 339.000 m 
+1106.000 339.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 1043.00 407.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1055.000 405.000 m 
+1055.000 395.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1050.000 405.000 m 
+1060.000 405.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 1042.00 327.76 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1055.000 345.000 m 
+1055.000 355.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1046.000 345.000 m 
+1064.000 345.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1049.000 343.000 m 
+1061.000 343.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1052.000 341.000 m 
+1058.000 341.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1054.000 339.000 m 
+1056.000 339.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 1095.00 407.00 Tm
+(+5V) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1105.000 405.000 m 
+1105.000 395.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+1100.000 405.000 m 
+1110.000 405.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 102.98 611.40 Tm
+(SCL) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 615.000 m 
+140.000 610.000 l
+125.000 610.000 l
+125.000 620.000 l
+140.000 620.000 l
+145.000 615.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 101.11 601.40 Tm
+(SDA) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+145.000 605.000 m 
+140.000 600.000 l
+125.000 600.000 l
+125.000 610.000 l
+140.000 610.000 l
+145.000 605.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+820.000 685.000 m 
+840.000 685.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 77.72 661.45 Tm
+(MCU_RXEN) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+160.000 665.000 m 
+155.000 660.000 l
+140.000 660.000 l
+140.000 670.000 l
+155.000 670.000 l
+160.000 665.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+160.000 715.000 m 
+165.000 715.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+621.000 289.000 m 
+629.000 281.000 l
+629.000 289.000 m 
+621.000 281.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+251.000 439.000 m 
+259.000 431.000 l
+259.000 439.000 m 
+251.000 431.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+251.000 449.000 m 
+259.000 441.000 l
+259.000 449.000 m 
+251.000 441.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+341.000 449.000 m 
+349.000 441.000 l
+349.000 449.000 m 
+341.000 441.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+251.000 409.000 m 
+259.000 401.000 l
+259.000 409.000 m 
+251.000 401.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+171.000 479.000 m 
+179.000 471.000 l
+179.000 479.000 m 
+171.000 471.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 432.69 661.28 Tm
+(ADC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+410.000 665.000 m 
+415.000 670.000 l
+430.000 670.000 l
+430.000 660.000 l
+415.000 660.000 l
+410.000 665.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+213.86 728.26 Td
+(PRO_MICRO_NRF52840_29P) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+213.86 737.11 Td
+(PRO-MICRO) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+180.00 725.00 80.00 -160.00 re
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+234.94 702.00 Td
+(BATIN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 706.00 Td
+(25) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 705.000 m 
+260.000 705.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+240.95 692.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 696.00 Td
+(24) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 695.000 m 
+260.000 695.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+243.04 682.00 Td
+(RST) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 686.00 Td
+(23) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 685.000 m 
+260.000 685.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+226.28 672.00 Td
+(3.3v Out) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 676.00 Td
+(22) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 675.000 m 
+260.000 675.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 632.00 Td
+(P1.15) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 636.00 Td
+(18) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 635.000 m 
+260.000 635.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 662.00 Td
+(P0.31) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 666.00 Td
+(21) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 665.000 m 
+260.000 665.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 692.00 Td
+(P0.08) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 696.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 695.000 m 
+180.000 695.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 622.00 Td
+(P1.13) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 626.00 Td
+(17) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 625.000 m 
+260.000 625.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 652.00 Td
+(P0.29) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 656.00 Td
+(20) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 655.000 m 
+260.000 655.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 612.00 Td
+(P1.11) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 616.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 615.000 m 
+260.000 615.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 642.00 Td
+(P0.02) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 646.00 Td
+(19) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 645.000 m 
+260.000 645.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 682.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 686.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 685.000 m 
+180.000 685.000 l
+S
+1.00 w
+0.55 0.14 0.14 RG
+180.00 705.00 m 180.00 706.66 178.66 708.00 177.00 708.00 c
+175.34 708.00 174.00 706.66 174.00 705.00 c
+174.00 703.34 175.34 702.00 177.00 702.00 c
+178.66 702.00 180.00 703.34 180.00 705.00 c
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 702.00 Td
+(P0.06) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 706.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 705.000 m 
+174.000 705.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 592.00 Td
+(P0.09) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 596.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 595.000 m 
+260.000 595.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+236.90 602.00 Td
+(P0.10) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 606.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 605.000 m 
+260.000 605.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 602.00 Td
+(P1.04) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+162.57 606.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 605.000 m 
+180.000 605.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 672.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 676.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 675.000 m 
+180.000 675.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 662.00 Td
+(P0.17) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 666.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 665.000 m 
+180.000 665.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 652.00 Td
+(P0.20) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 656.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 655.000 m 
+180.000 655.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 642.00 Td
+(P0.22) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 646.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 645.000 m 
+180.000 645.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 632.00 Td
+(P0.24) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 636.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 635.000 m 
+180.000 635.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 622.00 Td
+(P1.00) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+162.57 626.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 625.000 m 
+180.000 625.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 612.00 Td
+(P0.11) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+162.57 616.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 615.000 m 
+180.000 615.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 592.00 Td
+(P1.06) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+162.57 596.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 595.000 m 
+180.000 595.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 193.00 568.00 Tm
+(P1.01) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 189.00 547.57 Tm
+(27) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+190.000 545.000 m 
+190.000 565.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 203.00 568.00 Tm
+(P1.02) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 199.00 547.57 Tm
+(28) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+200.000 545.000 m 
+200.000 565.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 213.00 568.00 Tm
+(P1.07) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+0.00 1.00 -1.00 0.00 209.00 547.57 Tm
+(29) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+210.000 545.000 m 
+210.000 565.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+234.94 712.00 Td
+(BATIN) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+266.00 716.00 Td
+(26) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+280.000 715.000 m 
+260.000 715.000 l
+S
+BT
+/F1 7 Tf
+7.00 TL
+0.553 0.137 0.137 rg
+183.00 712.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.553 0.137 0.137 rg
+168.28 716.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.55 0.14 0.14 RG
+[] 0 d
+160.000 715.000 m 
+180.000 715.000 l
+S
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+864.25 253.00 Td
+(RA-02_C9900010926) Tj
+ET
+10.00 w
+BT
+/F3 9 Tf
+9.00 TL
+0.000 0.000 0.502 rg
+864.25 262.00 Td
+(RA-02) Tj
+ET
+2 J
+0 j
+100 M
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+837.000 250.000 m 
+903.000 250.000 l
+904.105 250.000 905.000 249.105 905.000 248.000 c
+905.000 162.000 l
+905.000 160.895 903.895 160.000 903.000 160.000 c
+837.000 160.000 l
+835.895 160.000 835.000 161.105 835.000 162.000 c
+835.000 248.000 l
+835.000 249.105 836.105 250.000 837.000 250.000 c
+S
+1.00 w
+0.53 0.00 0.00 RG
+0.53 0.00 0.00 rg
+[] 0 d
+841.50 245.00 m 841.50 245.83 840.83 246.50 840.00 246.50 c
+839.17 246.50 838.50 245.83 838.50 245.00 c
+838.50 244.17 839.17 243.50 840.00 243.50 c
+840.83 243.50 841.50 244.17 841.50 245.00 c
+B
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+838.70 236.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+828.78 241.00 Td
+(1) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+825.000 240.000 m 
+835.000 240.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+838.70 226.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+828.78 231.00 Td
+(2) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+825.000 230.000 m 
+835.000 230.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 216.00 Td
+(3.3V) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 221.00 Td
+(3) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 220.000 m 
+835.000 220.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 206.00 Td
+(RESET) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 211.00 Td
+(4) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 210.000 m 
+835.000 210.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 196.00 Td
+(DIO0) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 201.00 Td
+(5) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 200.000 m 
+835.000 200.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 186.00 Td
+(DIO1) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 191.00 Td
+(6) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 190.000 m 
+835.000 190.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 176.00 Td
+(DIO2) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 181.00 Td
+(7) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 180.000 m 
+835.000 180.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+838.70 166.00 Td
+(DIO3) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+828.78 171.00 Td
+(8) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+825.000 170.000 m 
+835.000 170.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+880.66 166.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+905.50 171.00 Td
+(9) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+915.000 170.000 m 
+905.000 170.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+877.79 176.00 Td
+(DIO4) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 181.00 Td
+(10) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 180.000 m 
+905.000 180.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+877.79 186.00 Td
+(DIO5) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 191.00 Td
+(11) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 190.000 m 
+905.000 190.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+882.64 196.00 Td
+(SCK) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 201.00 Td
+(12) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 200.000 m 
+905.000 200.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+876.71 206.00 Td
+(MISO) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 211.00 Td
+(13) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 210.000 m 
+905.000 210.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+876.71 216.00 Td
+(MOSI) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 221.00 Td
+(14) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 220.000 m 
+905.000 220.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+882.27 226.00 Td
+(NSS) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 0.000 1.000 rg
+905.50 231.00 Td
+(15) Tj
+ET
+1 J
+1 j
+1.00 w
+0.53 0.00 0.00 RG
+[] 0 d
+915.000 230.000 m 
+905.000 230.000 l
+S
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+880.66 236.00 Td
+(GND) Tj
+ET
+BT
+/F1 9 Tf
+9.00 TL
+0.000 g
+905.50 241.00 Td
+(16) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+[] 0 d
+915.000 240.000 m 
+905.000 240.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 773.85 196.40 Tm
+(BUSY) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+825.000 200.000 m 
+820.000 195.000 l
+805.000 195.000 l
+805.000 205.000 l
+820.000 205.000 l
+825.000 200.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 937.00 226.60 Tm
+(CS) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+915.000 230.000 m 
+920.000 235.000 l
+935.000 235.000 l
+935.000 225.000 l
+920.000 225.000 l
+915.000 230.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 936.71 196.60 Tm
+(SCK) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+915.000 200.000 m 
+920.000 205.000 l
+935.000 205.000 l
+935.000 195.000 l
+920.000 195.000 l
+915.000 200.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 937.00 216.60 Tm
+(MOSI) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+915.000 220.000 m 
+920.000 225.000 l
+935.000 225.000 l
+935.000 215.000 l
+920.000 215.000 l
+915.000 220.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 937.00 206.60 Tm
+(MISO) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+915.000 210.000 m 
+920.000 215.000 l
+935.000 215.000 l
+935.000 205.000 l
+920.000 205.000 l
+915.000 210.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 775.06 206.57 Tm
+(NRST) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+825.000 210.000 m 
+820.000 205.000 l
+805.000 205.000 l
+805.000 215.000 l
+820.000 215.000 l
+825.000 210.000 l
+S
+BT
+/F2 11 Tf
+11.00 TL
+0.000 0.000 1.000 rg
+1.00 -0.00 0.00 1.00 784.19 186.40 Tm
+(IRQ) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 0.00 1.00 RG
+0.00 g
+[] 0 d
+825.000 190.000 m 
+820.000 185.000 l
+805.000 185.000 l
+805.000 195.000 l
+820.000 195.000 l
+825.000 190.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 931.50 166.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+925.000 170.000 m 
+915.000 170.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+925.000 161.000 m 
+925.000 179.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+927.000 164.000 m 
+927.000 176.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+929.000 167.000 m 
+929.000 173.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+931.000 169.000 m 
+931.000 171.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 931.50 236.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+925.000 240.000 m 
+915.000 240.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+925.000 231.000 m 
+925.000 249.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+927.000 234.000 m 
+927.000 246.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+929.000 237.000 m 
+929.000 243.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+931.000 239.000 m 
+931.000 241.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 782.50 236.00 Tm
+(GND) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+815.000 240.000 m 
+825.000 240.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+815.000 249.000 m 
+815.000 231.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+813.000 246.000 m 
+813.000 234.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+811.000 243.000 m 
+811.000 237.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+809.000 241.000 m 
+809.000 239.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 0.53 0.00 RG
+0.00 g
+[] 0 d
+825.000 240.000 m 
+825.000 230.000 l
+S
+BT
+/F2 12 Tf
+12.00 TL
+0.000 g
+1.00 -0.00 0.00 1.00 789.82 216.00 Tm
+(VCC) Tj
+ET
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+815.000 220.000 m 
+825.000 220.000 l
+S
+1 J
+1 j
+1.00 w
+0.00 G
+0.00 g
+[] 0 d
+815.000 215.000 m 
+815.000 225.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+911.000 194.000 m 
+919.000 186.000 l
+919.000 194.000 m 
+911.000 186.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+911.000 184.000 m 
+919.000 176.000 l
+919.000 184.000 m 
+911.000 176.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+821.000 184.000 m 
+829.000 176.000 l
+829.000 184.000 m 
+821.000 176.000 l
+S
+1 J
+1 j
+1.00 w
+0.20 0.80 0.20 RG
+[] 0 d
+821.000 174.000 m 
+829.000 166.000 l
+829.000 174.000 m 
+821.000 166.000 l
+S
+0.80 0.00 0.00 rg
+652.50 420.00 m 652.50 421.38 651.38 422.50 650.00 422.50 c
+648.62 422.50 647.50 421.38 647.50 420.00 c
+647.50 418.62 648.62 417.50 650.00 417.50 c
+651.38 417.50 652.50 418.62 652.50 420.00 c
+f
+0.80 0.00 0.00 rg
+942.50 415.00 m 942.50 416.38 941.38 417.50 940.00 417.50 c
+938.62 417.50 937.50 416.38 937.50 415.00 c
+937.50 413.62 938.62 412.50 940.00 412.50 c
+941.38 412.50 942.50 413.62 942.50 415.00 c
+f
+0.80 0.00 0.00 rg
+942.50 395.00 m 942.50 396.38 941.38 397.50 940.00 397.50 c
+938.62 397.50 937.50 396.38 937.50 395.00 c
+937.50 393.62 938.62 392.50 940.00 392.50 c
+941.38 392.50 942.50 393.62 942.50 395.00 c
+f
+0.80 0.00 0.00 rg
+942.50 385.00 m 942.50 386.38 941.38 387.50 940.00 387.50 c
+938.62 387.50 937.50 386.38 937.50 385.00 c
+937.50 383.62 938.62 382.50 940.00 382.50 c
+941.38 382.50 942.50 383.62 942.50 385.00 c
+f
+0.80 0.00 0.00 rg
+942.50 375.00 m 942.50 376.38 941.38 377.50 940.00 377.50 c
+938.62 377.50 937.50 376.38 937.50 375.00 c
+937.50 373.62 938.62 372.50 940.00 372.50 c
+941.38 372.50 942.50 373.62 942.50 375.00 c
+f
+0.80 0.00 0.00 rg
+652.50 490.00 m 652.50 491.38 651.38 492.50 650.00 492.50 c
+648.62 492.50 647.50 491.38 647.50 490.00 c
+647.50 488.62 648.62 487.50 650.00 487.50 c
+651.38 487.50 652.50 488.62 652.50 490.00 c
+f
+0.80 0.00 0.00 rg
+942.50 465.00 m 942.50 466.38 941.38 467.50 940.00 467.50 c
+938.62 467.50 937.50 466.38 937.50 465.00 c
+937.50 463.62 938.62 462.50 940.00 462.50 c
+941.38 462.50 942.50 463.62 942.50 465.00 c
+f
+0.80 0.00 0.00 rg
+412.50 665.00 m 412.50 666.38 411.38 667.50 410.00 667.50 c
+408.62 667.50 407.50 666.38 407.50 665.00 c
+407.50 663.62 408.62 662.50 410.00 662.50 c
+411.38 662.50 412.50 663.62 412.50 665.00 c
+f
+0.80 0.00 0.00 rg
+162.50 680.00 m 162.50 681.38 161.38 682.50 160.00 682.50 c
+158.62 682.50 157.50 681.38 157.50 680.00 c
+157.50 678.62 158.62 677.50 160.00 677.50 c
+161.38 677.50 162.50 678.62 162.50 680.00 c
+f
+0.80 0.00 0.00 rg
+627.50 185.00 m 627.50 186.38 626.38 187.50 625.00 187.50 c
+623.62 187.50 622.50 186.38 622.50 185.00 c
+622.50 183.62 623.62 182.50 625.00 182.50 c
+626.38 182.50 627.50 183.62 627.50 185.00 c
+f
+0.80 0.00 0.00 rg
+627.50 195.00 m 627.50 196.38 626.38 197.50 625.00 197.50 c
+623.62 197.50 622.50 196.38 622.50 195.00 c
+622.50 193.62 623.62 192.50 625.00 192.50 c
+626.38 192.50 627.50 193.62 627.50 195.00 c
+f
+0.80 0.00 0.00 rg
+627.50 205.00 m 627.50 206.38 626.38 207.50 625.00 207.50 c
+623.62 207.50 622.50 206.38 622.50 205.00 c
+622.50 203.62 623.62 202.50 625.00 202.50 c
+626.38 202.50 627.50 203.62 627.50 205.00 c
+f
+0.80 0.00 0.00 rg
+827.50 240.00 m 827.50 241.38 826.38 242.50 825.00 242.50 c
+823.62 242.50 822.50 241.38 822.50 240.00 c
+822.50 238.62 823.62 237.50 825.00 237.50 c
+826.38 237.50 827.50 238.62 827.50 240.00 c
+f
+q
+102.00 0 0 20.00 706.00 30.50 cm
+/I0 Do
+Q
+endstream
+endobj
+1 0 obj
+<>
+endobj
+5 0 obj
+<<
+/Descent -209
+/CapHeight 727
+/StemV 0
+/Type /FontDescriptor
+/Flags 32
+/FontBBox [-559 -303 1446 1050]
+/FontName /Verdana
+/ItalicAngle 0
+/Ascent 1005
+>>
+endobj
+6 0 obj
+<>
+endobj
+7 0 obj
+<<
+/Type /Font
+/BaseFont /Times-Roman
+/Subtype /Type1
+/Encoding /WinAnsiEncoding
+/FirstChar 32
+/LastChar 255
+>>
+endobj
+8 0 obj
+<<
+/Descent -325
+/CapHeight 500
+/StemV 80
+/Type /FontDescriptor
+/Flags 32
+/FontBBox [-665 -325 2000 1006]
+/FontName /Arial
+/ItalicAngle 0
+/Ascent 1006
+>>
+endobj
+9 0 obj
+<>
+endobj
+10 0 obj
+<<
+/Type /XObject
+/Subtype /Image
+/Width 520
+/Height 105
+/ColorSpace /DeviceRGB
+/BitsPerComponent 8
+/DecodeParms <>
+/SMask 11 0 R
+/Length 6251
+/Filter /FlateDecode
+>>
+stream
+xKqǣ{$V>:dm]uXbřZ>ـlhy-a$`!qMrN|G^_LUz8gfdf0~	SEQe"EQaAQEۢ&\gn_@QJk#o(sdAO%1GŘf!Eykn!׍&쯯),rlUӳR(p\DUnGo),m(.@Qҳ\9TEYdd#ܼsu.)rUXWqvkG<7yW(Jk)˶yns
?'ȶ섡RtOQ:oNsk(kȯ`U7(ƬjY8n+jRݠ(ʚK@+U೸֙ٚ4Bd^T7(
+W㊞g)}]
4TIQc2+D+H	]noh6<+S`?w~N*c{!q~j`z&VPRe 4hy4AQ5!vQo_}?cEQր*Q	>yû(>?-hQV₞ɡ7ߦb~>HRǸ!<^}v~[TTaYUmAX$;9lφ"w9$3;yFQ<b~x-Q.}|	ӱu
+=9ԭ,jic>9R#bɪ|X_4eb'6~/vK!I"Nbejӎa?f򃔼b꧃1N3ȺwErU4;q5A6<0tϤ"/R>X$%AZ1c{od6^Sr)k-䔎zD/⇺l,bzs&gGL1HXɲUS]ҋRBrēwLwX|楔]2CI2w,!S*Nf&Ybd]]9U`~qQ]e3}GؑJRYQ඾r֌.͌uNO79ĝ(0'OvJg{d	٥wq9
d+,өQBV=>qU6FB%1ڷD؈_gVPW)By24qaJԌ$pk8q]t	q.!y-8́},wȷP%?C>4pTa߇8'ZNm19 m>QeMi$-:1̱mt^"\˩
84R!t	"!W'
}g>fd5hDuO3|m0I?x]r
fR4H48BKrYA1cL:{%o;gZpD1[{P|=`2(K^6gr_9Nو? 9,zYD4<*W)*/ws8y+<.E	嚞˹/u%NQA>9ϴch@93hvs~~I7k[|9)s&*þ[<#e
+ٜӓ(m!èkzP\`\̞hOa^Q]Bvl:P]}~Ո~zyfduۅjz'>)o\n`i%4Nk4GRI]/[|M=.-uV'W3A̯
_:<`I-jFLP]KcH&Ϙ~
W178YnW=!l 3n4)ZPeS	V5JR1=9ʾ0ɰAʛt1_d%ghl3%c
+nŔZ!g?+sDNoz8'"L5(BY;q5~'ųZ"慊o?JaЛc\%\MsɔiLq]PE['Uʎ_z7(C3rt$@EBe~9IoN@2?ԫ܍Q972ý.3@v^_}xZɶn\rR.ɳzz_MDI"t:V^Õ
+2/;؁y9
+©h	
+5vWP޻H#n
6*8W$1{ eB*rb4$!&?˵bJŰrtǀYGȥI	+~ǰװO
+NRT62Oy\Yw񑭖C{kKl/,4_}5iCpQ~"(Py.x1m0Mrڧ/ug]|&S_.=ę!V!t=)l7	t:ݤ'REgH&w9Zr]3ܺrc;hH9yK *g\mcbG`M@Qj<|)~Et
+8;N/$%4qI_KSp{pkx;Vi7u_N$C`F67ˣM-|2(/5)M*>]	&%[aǫG$	+B=etHLEy0{oD̔KMpT7FDA7?7nL
aRqQ[^1@(R@lk7	\pRa
[yC;eDx{RSZ\;GɞJh^ipNbH݈x;^XRƼ\gbMBTK-Pp;mpP.v:j;>*o
+ĽIG1|%z((y}D
+ć%O1$(wO _=Â7)^'*Bݲ#ULc6p7nPȫN+\^y;PjG82ܚG?!Vne2doŭϼ
+q1JO텘"ӻA n_5mE~qTiwu	8+i*x؆	Vu+^f|`(pp8ԔK}
+Zq9=	%&6紦uKe	}FX\q5&HOhӴTGw;G*@ӡ`n]0ss}ZWhNѰt\\ JYEpN1'{im[/`5a!np)'6}ڟBUǭ~嗩op:Vf/fVF[
!t'<}
S1ţc8}.4baΉ"+)!u(ofO|
qB	K?wCi!bѕ`+bjb1+/miɭg.X:rgUKK,3rڐf">[)˚+Djbna5[oL"pe|r(L^e̟gQYm5P]tݬĝ鐭xj1ՅDe\X[DV7TEF6/C@hbo1A`PoT:-݈}Vq!,J_j%D1#7;D$I(St(0'KK\SW}/;*b>)9]Jw+[CDi,ТˣRIᅖZe@l=Qbk tjAT`&wm3@] r28\ݸREMP+*zE❩{~|ԃMlwǶpZfo@3/M`cw$VLQ.%D6v]/p*4B)Ddb5~|
+J
+$ ۝zW3ovѨ}.R{L%o#4>݂q)C?.$a,nl&vJ,c>l*U4v)ɢ+iͿUM`娘lSƩP0؄Ha>"IUh+VQ7aJQr.6ҷǀf3@ŕ+z$e&SR#}[M"ڊPңey׀UA_bP1%2rJTd)J2&2MhIu*k
+F\UQkM}v(FjbS(I"kc
QO%)Ǧ(4L0gUwX^4'R_hXgmׯR9YiF|yLʕ.-%]g^\ϜTRSL1hAI6E	JZt)(PŠ(\@(rF-
+endstream
+endobj
+11 0 obj
+<<
+/Type /XObject
+/Subtype /Image
+/Width 520
+/Height 105
+/ColorSpace /DeviceGray
+/BitsPerComponent 8
+/DecodeParms <>
+/Length 6577
+/Filter /FlateDecode
+>>
+stream
+x]M?c=ȳJQj"*"xIJhGQ"o袌4(`B0_}{}3W3[g{{{k p*Bn"5-߯Ds0uN\'!WfBKl5Gt\1g}vD]EԄ\᾽3珧/Sډ&B!ދIɻ:fVW&>ľ~Jz\z
"`O>o/t[mGT]/u }EM4(uBW+I~
@SvXMq:~=|EP(BxF=hƕnWV/Ϗjpw,z~PvЬ]9ޕ,gv{NM[u)+++?DPɩ~^vJu?	)2tGqL
+Ï*ʋIȌ'#GR$$뵏[<ҡ䔊]]L'{KG9x)Lԉ
+0G6.ݡ92P-b|N2NU#4}K&jG
DԷc#By&ZdQ%ND#BݵԚv>)s\RPB>Wiк3k.
+p5|aΈ	ԈQQ5xO!XdAB"9g~2P<Z2s1v/tFtd/4Yx7wa鮋(:Bc7
E`~wa'S>{~
+0ㄠ)9ZmΔ>EE-#
+_xEbeAvc]DeCӏOs@j=oj+58`~W/x}љ^VzMQv7GU|CEbTK0CEңU%ێ^NO{K-q"+W`No`VW~md1JwKf.*(c*s=
+@qǭ/G|#A8tf:Vo	2g| <ʬ3i|r>V[%{gX7닅;%6&Z8(˰ؚ4+{>3'HgvM=MBt:LnukTl4ӉHDuNşvGXX~!,!5:M_cssQI>k#+0~ǎj'1\%P8ՠ*
+C"hoW!;yTv9.:64lLd6cm)gӕzʅwLd`:kj/f5O'3w2^$b^~ejS[z]*_~c#eI2[BӧC.⴨Q({z+WnݺB<=p2nCQ{w)[ב{\zZl[h.jyMt9]'pn7Fخ8Qp%| kN»3g2{ۜ#Հػ/r	@`Six΀?_wijpo"9{sS]r61B)z<;h!/
eT	nGAQis79Wbp k=i~ݵ)KX[n
+K3w̧$Apbz#D*J)2$)Wo&9VWeޱL\4@)69ֆՠH23`O@?zm~ GBQI
?=))Q,p1'nўXfb,̎ZY06GYw1=n32"0pyq0WH|,|WXm`R)^o;{ƌ&?Se
*:D?d6G+RQsi9+v
+EqwKmfP7JgNJ<ۀ3n-*:侟HvlwRs^0GjFy-NHu{T8xЪ̽
lmd`|8X~g.ty	H/m'4/8Nvor(dO9‹@1	bՄoA*e1Z쎕&L`- lR,l1xwݞ9t>D} p1~&)%,,0^j

4>N}춖1w6miW0crAI~aߊ?*{JIڢ	&ѿ+qTnLdz.~vKDFyо\y%[6mjrg">tCrRY)S@ڂ`ZرB8]`.f1J|!\2Yc:H6c/Qۜvo^aL%	Y"#qwǛqW_i,2Kz=◧IdV^\Y.G+ǻ6Dў4S)UrCD
+7#lg]|H'bRNUt~i'
n+
f&ݍPr'Rd:4".;mi氧/=j훌wJc	neWCn/PA5^b6I#6O%2A|ǧ㽎ԛ^MN@e.z	1ۓ	ý6(-+j	6g);8)tKTn?pgN{砱
+L!KI 4aҎ:
+r \4l'qK)o5UY#/h16ƁB2dV
yK
+6F8"ƍSSK_dRh4*_?LѫVS[+?޺IzE=B"ҔH׸3n+4d(b"`W~D}Gerp{)/B"hMh@#j~4-f`IkLtؐΒԣI4&ݿ֬_7KR$hyhJw3Tu0W|P&L/Y50_d&ןZB.B4eӋPB?%
+xYŰt#m#C`Xhѩp'zOCd~7p?DQaBC%'Qn'w 9{JCitWq,YO֦0:෤'҉FF߹:iy* ~%k/aXxQT4	EZ%{sIb&EjMQw4붘.qT7P@j@LJ7AhY<3P`P(&ia8=n5'>t^B͗Ym\_p2]KN/*5^1@&OVJ`
+hN%:OwoF|r`oX"-[ATw	m0y(
ǂہ[-68*6_558$Cne;h҉1c;[jȱ&gיDvoc߮I|RZ>BO>rBWȉT!9Oe	0+:BcbBP9i{6mB'e>Ty#xOZH{tT<`	3ރә@2l-&@WA>KZumx(11f8RuJWD+(f_ld9qmx1A65nd3RL~
+\rt4z*yKo܀LlYwO/;LoXeBG4WOpWCx) aR$OB?* ʹdՌ]lI yсK|3ܺ60s]n@{)R]#*1ѢX5K,-j."n^`W.8ufR;=wT"a´㓽l(.~iX\kf=Uaۏ*{IcEa1ʹTsxXQ,~Qė@梽R,@UR-J))J$}aͣ/)UXQ3[e¶5KFNe`fEїi	Ċ|r|+de&4\!qaj)2Z[E]oz#HFR?2.beгPd
+1^a4S)]Hph^@7
+WmNIY]|9ŋK]@toYɱJmͯ7^Al2+XWZ0^߱]^025_f4#/UGCJG[<~7ݲԎۭ5bչk}y1Ԭ0r2euZQM/6Z,`|S2ʺMJ(83w	[n
+}~s<_t)OΎT+(Zd%I5|`T뉃
+*͑tb"F42/*>>/ԣ@ ;$X2wׂiM=agCʽFWXl˨+RT^Or

Cwp]"H:u"##ҘRN/_z#)Kj=r+Vy<+Xn\G!!B_8V'w#Ev·s`EPR7«À!!ZAuTLmV#"oƐlogc"c';oHok/WE0]IXF]!wE0Xy-lx3ōaQ
+
tjMnUBQf<_E	X4f.]A0FIϋ*> ;\DPp#AT ?7
+endstream
+endobj
+2 0 obj
+<<
+/ProcSet [/PDF /Text /ImageB /ImageC /ImageI]
+/Font <<
+/F1 6 0 R
+/F2 7 0 R
+/F3 9 0 R
+>>
+/XObject <<
+/I0 10 0 R
+>>
+>>
+endobj
+12 0 obj
+<<
+/Producer (jsPDF 0.0.0)
+/CreationDate (D:20241217154849-00'00')
+>>
+endobj
+13 0 obj
+<<
+/Type /Catalog
+/Pages 1 0 R
+/OpenAction [3 0 R /FitH null]
+/PageLayout /OneColumn
+>>
+endobj
+xref
+0 14
+0000000000 65535 f 
+0000102899 00000 n 
+0000118853 00000 n 
+0000000015 00000 n 
+0000000125 00000 n 
+0000102956 00000 n 
+0000103126 00000 n 
+0000104180 00000 n 
+0000104307 00000 n 
+0000104476 00000 n 
+0000105520 00000 n 
+0000112030 00000 n 
+0000118988 00000 n 
+0000119074 00000 n 
+trailer
+<<
+/Size 14
+/Root 13 0 R
+/Info 12 0 R
+/ID [ <906A4C76C35816C42EB6FFD13B3B7D92> <906A4C76C35816C42EB6FFD13B3B7D92> ]
+>>
+startxref
+119178
+%%EOF
\ No newline at end of file
diff --git a/variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h b/variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h
new file mode 100644
index 000000000..2258c3135
--- /dev/null
+++ b/variants/diy/nrf52_promicro_diy_tcxo/rfswitch.h
@@ -0,0 +1,17 @@
+#include "RadioLib.h"
+
+// RF Switch Matrix SubG RFO_HP_LF / RFO_LP_LF / RFI_[NP]_LF0
+// DIO5 -> RFSW0_V1
+// DIO6 -> RFSW1_V2
+// DIO7 -> ANT_CTRL_ON + ESP_IO9/LR_GPS_ANT_DC_EN -> RFI_GPS (Bias-T GPS) (LR11x0 only)
+
+static const uint32_t rfswitch_dio_pins[] = {RADIOLIB_LR11X0_DIO5, RADIOLIB_LR11X0_DIO6, RADIOLIB_LR11X0_DIO7, RADIOLIB_NC,
+                                             RADIOLIB_NC};
+
+static const Module::RfSwitchMode_t rfswitch_table[] = {
+    // mode                  DIO5  DIO6  DIO7
+    {LR11x0::MODE_STBY, {LOW, LOW, LOW}},  {LR11x0::MODE_RX, {HIGH, LOW, LOW}},
+    {LR11x0::MODE_TX, {LOW, HIGH, LOW}},   {LR11x0::MODE_TX_HP, {LOW, HIGH, LOW}},
+    {LR11x0::MODE_TX_HF, {LOW, LOW, LOW}}, {LR11x0::MODE_GNSS, {LOW, LOW, HIGH}},
+    {LR11x0::MODE_WIFI, {LOW, LOW, LOW}},  END_OF_MODE_TABLE,
+};
\ No newline at end of file
diff --git a/variants/diy/nrf52_promicro_diy_tcxo/variant.h b/variants/diy/nrf52_promicro_diy_tcxo/variant.h
index 5c535ba1e..6ffb86cff 100644
--- a/variants/diy/nrf52_promicro_diy_tcxo/variant.h
+++ b/variants/diy/nrf52_promicro_diy_tcxo/variant.h
@@ -122,12 +122,13 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define USE_SX1262
 #define USE_RF95
 #define USE_SX1268
+#define USE_LR1121
 
 // RF95 CONFIG
 
-#define LORA_DIO0 (0 + 29) // P0.10 IRQ
+#define LORA_DIO0 (0 + 29) // P0.29 BUSY
 #define LORA_DIO1 (0 + 10) // P0.10 IRQ
-#define LORA_RESET (0 + 9) // P0.09
+#define LORA_RESET (0 + 9) // P0.09 NRST
 
 // RX/TX for RFM95/SX127x
 #define RF95_RXEN (0 + 17)    // P0.17
@@ -143,6 +144,19 @@ NRF52 PRO MICRO PIN ASSIGNMENT
 #define SX126X_RXEN (0 + 17)     // P0.17
 #define SX126X_TXEN RADIOLIB_NC  // Assuming that DIO2 is connected to TXEN pin. If not, TXEN must be connected.
 
+// LR1121
+#ifdef USE_LR1121
+#define LR1121_IRQ_PIN (0 + 10)      // P0.10 IRQ
+#define LR1121_NRESET_PIN LORA_RESET // P0.09 NRST
+#define LR1121_BUSY_PIN (0 + 29)     // P0.29 BUSY
+#define LR1121_SPI_NSS_PIN LORA_CS   // P1.13
+#define LR1121_SPI_SCK_PIN LORA_SCK
+#define LR1121_SPI_MOSI_PIN LORA_MOSI
+#define LR1121_SPI_MISO_PIN LORA_MISO
+#define LR11X0_DIO3_TCXO_VOLTAGE 1.8
+#define LR11X0_DIO_AS_RF_SWITCH
+#endif
+
 // #define SX126X_MAX_POWER 8 set this if using a high-power board!
 
 /*
@@ -164,6 +178,7 @@ settings.
 | Seeed        | Wio-SX1262       | yes  | Int       | Sooooo cute!                          |
 | AI-Thinker   | RA-02            | No   | Int       | SX1278 **433mhz band only**           |
 | RF Solutions | RFM95            | No   | Int       | Untested                              |
+| Ebyte        | E80-900M2213S    | Yes  | Int       | LR1121 radio                          |
 
 */
 
@@ -179,4 +194,4 @@ extern float tcxoVoltage; // make this available everywhere
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
 
-#endif
+#endif
\ No newline at end of file
diff --git a/variants/diy/platformio.ini b/variants/diy/platformio.ini
index f3c22b7a8..b7f3f6a92 100644
--- a/variants/diy/platformio.ini
+++ b/variants/diy/platformio.ini
@@ -61,7 +61,6 @@ debug_tool = jlink
 [env:nrf52_promicro_diy_tcxo]
 extends = nrf52840_base
 board = promicro-nrf52840
-board_level = extra
 build_flags = ${nrf52840_base.build_flags}
   -I variants/diy/nrf52_promicro_diy_tcxo
   -D NRF52_PROMICRO_DIY
diff --git a/variants/dreamcatcher/platformio.ini b/variants/dreamcatcher/platformio.ini
index 46f9b9871..c57849d96 100644
--- a/variants/dreamcatcher/platformio.ini
+++ b/variants/dreamcatcher/platformio.ini
@@ -11,7 +11,7 @@ build_flags =
   -DARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.7
+  earlephilhower/ESP8266Audio@^1.9.9
   earlephilhower/ESP8266SAM@^1.0.1
 
 [env:dreamcatcher-2206] 
diff --git a/variants/dreamcatcher/variant.h b/variants/dreamcatcher/variant.h
index eb95a95dd..7835979e1 100644
--- a/variants/dreamcatcher/variant.h
+++ b/variants/dreamcatcher/variant.h
@@ -60,6 +60,7 @@
 #define DAC_I2S_BCK 21
 #define DAC_I2S_WS 9
 #define DAC_I2S_DOUT 48
+#define DAC_I2S_MCLK 44
 
 #define BIAS_T_ENABLE 7 // needs to be low
 #define BIAS_T_VALUE 0
diff --git a/variants/heltec_capsule_sensor_v3/platformio.ini b/variants/heltec_capsule_sensor_v3/platformio.ini
index f1aef925d..b5ffb65c2 100644
--- a/variants/heltec_capsule_sensor_v3/platformio.ini
+++ b/variants/heltec_capsule_sensor_v3/platformio.ini
@@ -7,5 +7,4 @@ build_flags =
   ${esp32s3_base.build_flags} -I variants/heltec_capsule_sensor_v3
   -D HELTEC_CAPSULE_SENSOR_V3
   -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
-  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
-
+  ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
\ No newline at end of file
diff --git a/variants/heltec_v2.1/platformio.ini b/variants/heltec_v2.1/platformio.ini
index 5aa04fc58..ea2281911 100644
--- a/variants/heltec_v2.1/platformio.ini
+++ b/variants/heltec_v2.1/platformio.ini
@@ -1,4 +1,5 @@
 [env:heltec-v2_1]
+board_level = extra
 ;build_type = debug ; to make it possible to step through our jtag debugger 
 extends = esp32_base
 board = heltec_wifi_lora_32_V2
diff --git a/variants/heltec_v2/platformio.ini b/variants/heltec_v2/platformio.ini
index cee1537d0..c81bca8ba 100644
--- a/variants/heltec_v2/platformio.ini
+++ b/variants/heltec_v2/platformio.ini
@@ -1,5 +1,6 @@
 [env:heltec-v2_0]
-;build_type = debug ; to make it possible to step through our jtag debugger 
+;build_type = debug ; to make it possible to step through our jtag debugger
+board_level = extra
 extends = esp32_base
 board = heltec_wifi_lora_32_V2
 build_flags = 
diff --git a/variants/heltec_wireless_paper/variant.h b/variants/heltec_wireless_paper/variant.h
index 520dcec9b..fe8f391df 100644
--- a/variants/heltec_wireless_paper/variant.h
+++ b/variants/heltec_wireless_paper/variant.h
@@ -32,6 +32,9 @@
 #define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
+#define NO_EXT_GPIO 1
+#define NO_GPS 1
+
 // LoRa
 #define USE_SX1262
 
diff --git a/variants/heltec_wireless_paper_v1/platformio.ini b/variants/heltec_wireless_paper_v1/platformio.ini
index 999f1586a..c94bcacca 100644
--- a/variants/heltec_wireless_paper_v1/platformio.ini
+++ b/variants/heltec_wireless_paper_v1/platformio.ini
@@ -1,5 +1,6 @@
 [env:heltec-wireless-paper-v1_0]
 extends = esp32s3_base
+board_level = extra
 board = heltec_wifi_lora_32_V3
 build_flags = 
   ${esp32s3_base.build_flags} 
diff --git a/variants/heltec_wireless_paper_v1/variant.h b/variants/heltec_wireless_paper_v1/variant.h
index 520dcec9b..fe8f391df 100644
--- a/variants/heltec_wireless_paper_v1/variant.h
+++ b/variants/heltec_wireless_paper_v1/variant.h
@@ -32,6 +32,9 @@
 #define HAS_32768HZ
 #define ADC_CTRL_ENABLED LOW
 
+#define NO_EXT_GPIO 1
+#define NO_GPS 1
+
 // LoRa
 #define USE_SX1262
 
diff --git a/variants/heltec_wireless_tracker_V1_0/platformio.ini b/variants/heltec_wireless_tracker_V1_0/platformio.ini
index 303e27dbf..0e48c72f2 100644
--- a/variants/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/heltec_wireless_tracker_V1_0/platformio.ini
@@ -1,14 +1,13 @@
 [env:heltec-wireless-tracker-V1-0]
 extends = esp32s3_base
+board_level = extra
 board = heltec_wireless_tracker
 upload_protocol = esptool
-
 build_flags = 
   ${esp32s3_base.build_flags} -I variants/heltec_wireless_tracker_V1_0
   -D HELTEC_TRACKER_V1_0
   -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   ;-D DEBUG_DISABLED ; uncomment this line to disable DEBUG output
-
 lib_deps =
   ${esp32s3_base.lib_deps}
   lovyan03/LovyanGFX@^1.1.8
\ No newline at end of file
diff --git a/variants/icarus/pins_arduino.h b/variants/icarus/pins_arduino.h
new file mode 100644
index 000000000..12d72d6dd
--- /dev/null
+++ b/variants/icarus/pins_arduino.h
@@ -0,0 +1,21 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include 
+
+#define USB_VID 0x2886
+#define USB_PID 0x0059
+
+// GPIO48 Reference: https://github.com/espressif/arduino-esp32/pull/8600
+
+// The default Wire will be mapped to Screen and Sensors
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+// Default SPI will be mapped to Radio
+static const uint8_t MISO = 39;
+static const uint8_t SCK = 21;
+static const uint8_t MOSI = 38;
+static const uint8_t SS = 17;
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/icarus/platformio.ini b/variants/icarus/platformio.ini
new file mode 100644
index 000000000..11f09cab4
--- /dev/null
+++ b/variants/icarus/platformio.ini
@@ -0,0 +1,19 @@
+[env:icarus]
+extends = esp32s3_base
+board = icarus
+board_level = extra
+board_check = true
+board_build.mcu = esp32s3
+upload_protocol = esptool
+upload_speed = 921600
+platform_packages = framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
+lib_deps =
+  ${esp32s3_base.lib_deps}
+build_unflags =
+  ${esp32s3_base.build_unflags}
+  -DARDUINO_USB_MODE=1
+build_flags = 
+  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/icarus
+  -DBOARD_HAS_PSRAM 
+
+  -DARDUINO_USB_MODE=0
diff --git a/variants/icarus/variant.h b/variants/icarus/variant.h
new file mode 100644
index 000000000..c9c74b45a
--- /dev/null
+++ b/variants/icarus/variant.h
@@ -0,0 +1,31 @@
+// Icarus has a 1.3 inch OLED Screen
+#define SCREEN_SSD106
+
+#define I2C_SDA 8
+#define I2C_SCL 9
+
+#define I2C_SDA1 18
+#define I2C_SCL1 6
+
+#define BUTTON_PIN 7 // Selection button
+
+// RA-01SH/HT-RA62 LORA module
+#define USE_SX1262
+
+#define LORA_MISO 39
+#define LORA_SCK 21
+#define LORA_MOSI 38
+#define LORA_CS 17
+
+#define LORA_RESET 42
+#define LORA_DIO1 5
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY 47
+#define SX126X_RESET LORA_RESET
+
+//  DIO2 controlls an antenna switch
+#define SX126X_DIO2_AS_RF_SWITCH
+#endif
diff --git a/variants/mesh-tab/pins_arduino.h b/variants/mesh-tab/pins_arduino.h
new file mode 100644
index 000000000..c995f638c
--- /dev/null
+++ b/variants/mesh-tab/pins_arduino.h
@@ -0,0 +1,65 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "soc/soc_caps.h"
+#include 
+
+#define USB_VID 0x303A
+#define USB_PID 0x80D6
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 8;
+static const uint8_t SCL = 9;
+
+static const uint8_t SS = 5;
+static const uint8_t MOSI = 35;
+static const uint8_t MISO = 37;
+static const uint8_t SDO = 35;
+static const uint8_t SDI = 37;
+static const uint8_t SCK = 36;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 3;
+static const uint8_t A3 = 4;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 7;
+static const uint8_t A7 = 8;
+static const uint8_t A8 = 9;
+static const uint8_t A9 = 10;
+static const uint8_t A10 = 11;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+
+static const uint8_t T1 = 1;
+static const uint8_t T3 = 3;
+static const uint8_t T5 = 5;
+static const uint8_t T6 = 6;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 8;
+static const uint8_t T9 = 9;
+static const uint8_t T10 = 10;
+static const uint8_t T11 = 11;
+static const uint8_t T12 = 12;
+static const uint8_t T14 = 14;
+
+static const uint8_t VBAT_SENSE = 2;
+static const uint8_t VBUS_SENSE = 34;
+
+// User LED
+#define LED_BUILTIN 13
+#define BUILTIN_LED LED_BUILTIN // backward compatibility
+
+static const uint8_t RGB_DATA = 40;
+// RGB_BUILTIN and RGB_BRIGHTNESS can be used in new Arduino API neopixelWrite()
+#define RGB_BUILTIN (RGB_DATA + SOC_GPIO_PIN_COUNT)
+#define RGB_BRIGHTNESS 64
+
+static const uint8_t RGB_PWR = 39;
+static const uint8_t LDO2 = 39;
+static const uint8_t LED = 13;
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/mesh-tab/platformio.ini b/variants/mesh-tab/platformio.ini
new file mode 100644
index 000000000..26b072cde
--- /dev/null
+++ b/variants/mesh-tab/platformio.ini
@@ -0,0 +1,233 @@
+; Base for Mesh-Tab device (esp32-s3 N16R2 + ra-sh01 lora)
+; https://github.com/valzzu/Mesh-Tab
+[mesh_tab_base]
+extends = esp32s3_base
+board = mesh-tab
+board_level = extra
+board_upload.flash_size = 16MB
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+build_flags = ${esp32s3_base.build_flags}
+  -D MESH_TAB
+  -D CONFIG_ARDUHAL_ESP_LOG
+  -D CONFIG_ARDUHAL_LOG_COLORS=1
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D MESHTASTIC_EXCLUDE_CANNEDMESSAGES=1
+  -D MESHTASTIC_EXCLUDE_INPUTBROKER=1
+  -D MESHTASTIC_EXCLUDE_BLUETOOTH=1
+  -D MESHTASTIC_EXCLUDE_WEBSERVER=1
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D LV_BUILD_TEST=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D MAX_NUM_NODES=250
+  -D MAX_THREADS=40
+  -D HAS_SCREEN=0
+  -D HAS_TFT=1
+  -D USE_PIN_BUZZER
+  -D RAM_SIZE=1024
+  -D LGFX_DRIVER_TEMPLATE
+  -D LGFX_DRIVER=LGFX_GENERIC
+  -D LGFX_PIN_SCK=12
+  -D LGFX_PIN_MOSI=13
+  -D LGFX_PIN_MISO=11
+  -D LGFX_PIN_DC=16
+  -D LGFX_PIN_CS=10
+  -D LGFX_PIN_RST=-1
+  -D LGFX_PIN_BL=42
+  -D LGFX_TOUCH_INT=41
+  -D VIEW_320x240
+  -D USE_PACKET_API
+  -I lib/device-ui/generated/ui_320x240
+  -I variants/mesh-tab
+build_src_filter = ${esp32_base.build_src_filter}
+  +<../lib/device-ui/generated/ui_320x240>
+  +<../lib/device-ui/resources>
+  +<../lib/device-ui/locale>
+  +<../lib/device-ui/source>
+lib_deps = ${esp32_base.lib_deps}
+  lovyan03/LovyanGFX@^1.1.16
+
+; 3.2" TN TFT ST7789 / XPT2046: https://vi.aliexpress.com/item/1005005933490544.html
+[env:mesh-tab-3-2-TN-resistive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_PANEL=ST7789
+  -D LGFX_INVERT_COLOR=false
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_ROTATION=3
+  -D LGFX_TOUCH=XPT2046
+  -D SPI_FREQUENCY=60000000
+  -D LGFX_TOUCH_SPI_FREQ=2500000
+  -D LGFX_TOUCH_SPI_HOST=2
+  -D LGFX_TOUCH_CS=7
+  -D LGFX_TOUCH_CLK=12
+  -D LGFX_TOUCH_DO=11
+  -D LGFX_TOUCH_DIN=13
+  -D LGFX_TOUCH_X_MIN=300
+  -D LGFX_TOUCH_X_MAX=3900
+  -D LGFX_TOUCH_Y_MIN=400
+  -D LGFX_TOUCH_Y_MAX=3900
+  -D LGFX_TOUCH_ROTATION=4
+
+; 3.2" IPS TFT ILI9341 / XPT2046: https://www.aliexpress.com/item/1005006258575617.html
+[env:mesh-tab-3-2-IPS-resistive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_PANEL=ILI9341
+  -D LGFX_INVERT_COLOR=true
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_ROTATION=1
+  -D LGFX_TOUCH=XPT2046
+  -D SPI_FREQUENCY=60000000 ; if image is distorted then lower to 40 MHz
+  -D LGFX_TOUCH_SPI_FREQ=2500000
+  -D LGFX_TOUCH_SPI_HOST=2
+  -D LGFX_TOUCH_CS=7
+  -D LGFX_TOUCH_CLK=12
+  -D LGFX_TOUCH_DO=11
+  -D LGFX_TOUCH_DIN=13
+  -D LGFX_TOUCH_X_MIN=300
+  -D LGFX_TOUCH_X_MAX=3900
+  -D LGFX_TOUCH_Y_MIN=400
+  -D LGFX_TOUCH_Y_MAX=3900
+  -D LGFX_TOUCH_ROTATION=4
+
+; 3.5" IPS TFT ILI9488 / XPT2046: https://vi.aliexpress.com/item/1005006333922639.html
+[env:mesh-tab-3-5-IPS-resistive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_SCREEN_WIDTH=320
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_PANEL=ILI9488
+  -D LGFX_INVERT_COLOR=true
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_DLEN_16BITS=false
+  -D LGFX_ROTATION=0
+  -D LGFX_TOUCH=XPT2046
+  -D SPI_FREQUENCY=40000000 ; may go higher upto 40/60/80 MHz
+  -D LGFX_TOUCH_SPI_FREQ=2500000
+  -D LGFX_TOUCH_SPI_HOST=2
+  -D LGFX_TOUCH_CS=7
+  -D LGFX_TOUCH_CLK=12
+  -D LGFX_TOUCH_DO=11
+  -D LGFX_TOUCH_DIN=13
+  -D LGFX_TOUCH_X_MIN=300
+  -D LGFX_TOUCH_X_MAX=3900
+  -D LGFX_TOUCH_Y_MIN=400
+  -D LGFX_TOUCH_Y_MAX=3900
+  -D LGFX_TOUCH_ROTATION=0
+
+; 3.5" TN TFT ILI9488 / XPT2046: https://vi.aliexpress.com/item/32985467436.html
+[env:mesh-tab-3-5-TN-resistive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_SCREEN_WIDTH=320
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_PANEL=HX8357B
+  -D SPI_FREQUENCY=60000000
+  -D LGFX_INVERT_COLOR=false
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_DLEN_16BITS=false
+  -D LGFX_ROTATION=4
+  -D LGFX_TOUCH=XPT2046
+  -D LGFX_TOUCH_SPI_FREQ=2500000
+  -D LGFX_TOUCH_SPI_HOST=2
+  -D LGFX_TOUCH_CS=7
+  -D LGFX_TOUCH_CLK=12
+  -D LGFX_TOUCH_DO=11
+  -D LGFX_TOUCH_DIN=13
+  -D LGFX_TOUCH_X_MIN=300
+  -D LGFX_TOUCH_X_MAX=3900
+  -D LGFX_TOUCH_Y_MIN=400
+  -D LGFX_TOUCH_Y_MAX=3900
+  -D LGFX_TOUCH_ROTATION=2
+
+; 3.2" IPS TFT ILI9341 / FT6236: https://vi.aliexpress.com/item/1005006624072350.html
+[env:mesh-tab-3-2-IPS-capacitive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_PANEL=ILI9341
+  -D LGFX_INVERT_COLOR=true
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_ROTATION=1
+  -D LGFX_TOUCH=FT5x06
+  -D SPI_FREQUENCY=40000000 ; may go higher upto 60/80 MHz
+  -D LGFX_TOUCH_I2C_PORT=0
+  -D LGFX_TOUCH_I2C_ADDR=0x38
+  -D LGFX_TOUCH_I2C_SDA=8
+  -D LGFX_TOUCH_I2C_SCL=9
+  -D LGFX_TOUCH_RST=7
+  -D LGFX_TOUCH_X_MIN=0
+  -D LGFX_TOUCH_X_MAX=319
+  -D LGFX_TOUCH_Y_MIN=0
+  -D LGFX_TOUCH_Y_MAX=479
+  -D LGFX_TOUCH_ROTATION=0
+  -D LGFX_TOUCH_I2C_FREQ=1000000
+
+; 3.5" IPS TFT ILI9488 / FT6236: https://vi.aliexpress.com/item/1005006893699919.html
+[env:mesh-tab-3-5-IPS-capacitive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_SCREEN_WIDTH=320
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_PANEL=ILI9488
+  -D LGFX_INVERT_COLOR=true
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_DLEN_16BITS=false
+  -D LGFX_ROTATION=1
+  -D LGFX_TOUCH=FT5x06
+  -D SPI_FREQUENCY=30000000 ; may go higher upto 40/60/80 MHz
+  -D LGFX_TOUCH_I2C_PORT=0
+  -D LGFX_TOUCH_I2C_ADDR=0x38
+  -D LGFX_TOUCH_I2C_SDA=8
+  -D LGFX_TOUCH_I2C_SCL=9
+  -D LGFX_TOUCH_RST=7
+  -D LGFX_TOUCH_X_MIN=0
+  -D LGFX_TOUCH_X_MAX=319
+  -D LGFX_TOUCH_Y_MIN=0
+  -D LGFX_TOUCH_Y_MAX=479
+  -D LGFX_TOUCH_ROTATION=1
+  -D LGFX_TOUCH_I2C_FREQ=1000000
+
+; 4.0" IPS TFT ILI9488 / FT6236: https://vi.aliexpress.com/item/1005007082906950.html
+[env:mesh-tab-4-0-IPS-capacitive]
+extends = mesh_tab_base
+build_flags = ${mesh_tab_base.build_flags}
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_SCREEN_WIDTH=320
+  -D LGFX_SCREEN_HEIGHT=480
+  -D LGFX_PANEL=HX8357B
+  -D LGFX_INVERT_COLOR=true
+  -D LGFX_RGB_ORDER=false
+  -D LGFX_DLEN_16BITS=false
+  -D LGFX_ROTATION=4
+  -D LGFX_TOUCH=FT5x06
+  -D SPI_FREQUENCY=30000000 ; may go higher upto 40/60/80 MHz
+  -D LGFX_TOUCH_I2C_PORT=0
+  -D LGFX_TOUCH_I2C_ADDR=0x38
+  -D LGFX_TOUCH_I2C_SDA=8
+  -D LGFX_TOUCH_I2C_SCL=9
+  -D LGFX_TOUCH_RST=7
+  -D LGFX_TOUCH_X_MIN=0
+  -D LGFX_TOUCH_X_MAX=319
+  -D LGFX_TOUCH_Y_MIN=0
+  -D LGFX_TOUCH_Y_MAX=479
+  -D LGFX_TOUCH_ROTATION=1
+  -D LGFX_TOUCH_I2C_FREQ=1000000
\ No newline at end of file
diff --git a/variants/mesh-tab/variant.h b/variants/mesh-tab/variant.h
new file mode 100644
index 000000000..533c931bc
--- /dev/null
+++ b/variants/mesh-tab/variant.h
@@ -0,0 +1,58 @@
+#ifndef _VARIANT_MESHTAB_DIY_
+#define _VARIANT_MESHTAB_DIY_
+
+#define HAS_TOUCHSCREEN 1
+
+#define SLEEP_TIME 120
+
+// Analog pins
+#define BATTERY_PIN 4 // A battery voltage measurement pin, voltage divider connected here to measure battery voltage
+// ratio of voltage divider (100k, 220k)
+#define ADC_MULTIPLIER 1.6 // 1.45 + 10% for correction of display undervoltage.
+#define ADC_CHANNEL ADC1_GPIO4_CHANNEL
+
+// LED
+#define LED_PIN 21
+
+// Button
+#define BUTTON_PIN 0
+
+// Button
+#define PIN_BUZZER 5
+
+// GPS
+#define GPS_RX_PIN 18
+#define GPS_TX_PIN 17
+
+// #define HAS_SDCARD 1
+#define SPI_MOSI 13
+#define SPI_SCK 12
+#define SPI_MISO 11
+#define SPI_CS 10
+#define SDCARD_CS 6
+
+// LORA MODULES
+#define USE_SX1262
+
+// LORA SPI
+#define LORA_SCK 36
+#define LORA_MISO 37
+#define LORA_MOSI 35
+#define LORA_CS 39
+
+// LORA CONFIG
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 14
+#define LORA_DIO1 15 // SX1262 IRQ
+#define LORA_DIO2 40 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET 14
+#define SX126X_RXEN 47
+#define SX126X_TXEN RADIOLIB_NC // Assuming that DIO2 is connected to TXEN pin
+
+#endif
diff --git a/variants/monteops_hw1/platformio.ini b/variants/monteops_hw1/platformio.ini
index 4b42dce39..eaa246526 100644
--- a/variants/monteops_hw1/platformio.ini
+++ b/variants/monteops_hw1/platformio.ini
@@ -12,4 +12,4 @@ lib_deps =
   https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
\ No newline at end of file
+;upload_protocol = jlink
diff --git a/variants/nibble_esp32/platformio.ini b/variants/nibble_esp32/platformio.ini
new file mode 100644
index 000000000..24d2ee2a5
--- /dev/null
+++ b/variants/nibble_esp32/platformio.ini
@@ -0,0 +1,6 @@
+[env:nibble-esp32]
+extends = esp32s3_base
+board = esp32-s3-zero
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/nibble_esp32
\ No newline at end of file
diff --git a/variants/nibble_esp32/variant.h b/variants/nibble_esp32/variant.h
new file mode 100644
index 000000000..8ffbd9d59
--- /dev/null
+++ b/variants/nibble_esp32/variant.h
@@ -0,0 +1,18 @@
+#define I2C_SDA 11 // I2C pins for this board
+#define I2C_SCL 10
+
+#define LED_PIN 1 // If defined we will blink this LED
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 5 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC
\ No newline at end of file
diff --git a/variants/nibble_rp2040/platformio.ini b/variants/nibble_rp2040/platformio.ini
new file mode 100644
index 000000000..ad987895f
--- /dev/null
+++ b/variants/nibble_rp2040/platformio.ini
@@ -0,0 +1,17 @@
+[env:nibble-rp2040]
+extends = rp2040_base
+board = rpipico
+board_level = extra
+upload_protocol = picotool
+
+# add our variants files to the include and src paths
+build_flags = ${rp2040_base.build_flags} 
+  -DPRIVATE_HW
+  -Ivariants/nibble_rp2040
+  -DDEBUG_RP2040_PORT=Serial
+  -DHW_SPI1_DEVICE
+  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
+lib_deps =
+  ${rp2040_base.lib_deps}
+debug_build_flags = ${rp2040_base.build_flags}, -g
+debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/nibble_rp2040/variant.h b/variants/nibble_rp2040/variant.h
new file mode 100644
index 000000000..0f71b98e9
--- /dev/null
+++ b/variants/nibble_rp2040/variant.h
@@ -0,0 +1,18 @@
+#define ARDUINO_ARCH_AVR
+
+#define BUTTON_PIN -1 // Pin 17 used for antenna switching via DIO4
+
+#define LED_PIN 1
+
+#define HAS_CPU_SHUTDOWN 1
+
+#define USE_RF95
+#define LORA_SCK 10
+#define LORA_MISO 12
+#define LORA_MOSI 11
+#define LORA_CS 13
+
+#define LORA_DIO0 14
+#define LORA_RESET 15
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC
diff --git a/variants/nugget_s2_lora/platformio.ini b/variants/nugget_s2_lora/platformio.ini
new file mode 100644
index 000000000..2a7ff1013
--- /dev/null
+++ b/variants/nugget_s2_lora/platformio.ini
@@ -0,0 +1,6 @@
+[env:nugget-s2-lora]
+extends = esp32s2_base
+board = lolin_s2_mini
+board_level = extra
+build_flags = 
+  ${esp32s2_base.build_flags} -D PRIVATE_HW -I variants/nugget_s2_lora
\ No newline at end of file
diff --git a/variants/nugget_s2_lora/variant.h b/variants/nugget_s2_lora/variant.h
new file mode 100644
index 000000000..2d123d603
--- /dev/null
+++ b/variants/nugget_s2_lora/variant.h
@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 36
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 12                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 8
+#define LORA_MOSI 10
+#define LORA_CS 13
+#define LORA_DIO0 16
+#define LORA_RESET 5
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC
\ No newline at end of file
diff --git a/variants/nugget_s3_lora/platformio.ini b/variants/nugget_s3_lora/platformio.ini
new file mode 100644
index 000000000..729a3ef23
--- /dev/null
+++ b/variants/nugget_s3_lora/platformio.ini
@@ -0,0 +1,6 @@
+[env:nugget-s3-lora]
+extends = esp32s3_base
+board = lolin_s3_mini
+board_level = extra
+build_flags = 
+  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/nugget_s3_lora
\ No newline at end of file
diff --git a/variants/nugget_s3_lora/variant.h b/variants/nugget_s3_lora/variant.h
new file mode 100644
index 000000000..488fe4e44
--- /dev/null
+++ b/variants/nugget_s3_lora/variant.h
@@ -0,0 +1,23 @@
+#define I2C_SDA 34 // I2C pins for this board
+#define I2C_SCL 38
+
+#define LED_PIN 15 // If defined we will blink this LED
+
+#define HAS_NEOPIXEL                         // Enable the use of neopixels
+#define NEOPIXEL_COUNT 3                     // How many neopixels are connected
+#define NEOPIXEL_DATA 10                     // gpio pin used to send data to the neopixels
+#define NEOPIXEL_TYPE (NEO_GRB + NEO_KHZ800) // type of neopixels in use
+
+#define BUTTON_PIN 0 // If defined, this will be used for user button presses
+#define BUTTON_NEED_PULLUP
+
+#define USE_RF95
+#define LORA_SCK 6
+#define LORA_MISO 7
+#define LORA_MOSI 8
+#define LORA_CS 9
+#define LORA_DIO0 16 // a No connect on the SX1262 module
+#define LORA_RESET 4
+
+#define LORA_DIO1 RADIOLIB_NC
+#define LORA_DIO2 RADIOLIB_NC
\ No newline at end of file
diff --git a/variants/portduino-buildroot/platformio.ini b/variants/portduino-buildroot/platformio.ini
new file mode 100644
index 000000000..3fbd26910
--- /dev/null
+++ b/variants/portduino-buildroot/platformio.ini
@@ -0,0 +1,8 @@
+[env:buildroot]
+extends = portduino_base
+; Optional libraries should be appended to `PLATFORMIO_BUILD_FLAGS`
+; environment variable in the buildroot environment.
+build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino-buildroot
+board = buildroot
+lib_deps = ${portduino_base.lib_deps}
+build_src_filter = ${portduino_base.build_src_filter}
\ No newline at end of file
diff --git a/variants/portduino-buildroot/variant.h b/variants/portduino-buildroot/variant.h
new file mode 100644
index 000000000..b7b39d6e8
--- /dev/null
+++ b/variants/portduino-buildroot/variant.h
@@ -0,0 +1,5 @@
+#define HAS_SCREEN 1
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define HAS_GPS 1
+#define MAX_RX_TOPHONE settingsMap[maxtophone]
+#define MAX_NUM_NODES settingsMap[maxnodes]
\ No newline at end of file
diff --git a/variants/portduino/platformio.ini b/variants/portduino/platformio.ini
index 46417e388..cad87ea8c 100644
--- a/variants/portduino/platformio.ini
+++ b/variants/portduino/platformio.ini
@@ -2,9 +2,14 @@
 extends = portduino_base
 ; The pkg-config commands below optionally add link flags.
 ; the || : is just a "or run the null command" to avoid returning an error code
-build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino -I /usr/include
+build_flags = ${portduino_base.build_flags} -O0 -I variants/portduino
+  -I /usr/include
   !pkg-config --libs libulfius --silence-errors || :
   !pkg-config --libs openssl --silence-errors || :
 board = cross_platform
 lib_deps = ${portduino_base.lib_deps}
 build_src_filter = ${portduino_base.build_src_filter}
+
+[env:coverage]
+extends = env:native
+build_flags = -lgcov --coverage -fprofile-abs-path ${env:native.build_flags}
diff --git a/variants/radiomaster_900_bandit/platformio.ini b/variants/radiomaster_900_bandit/platformio.ini
index 4ff8a6ea2..010791d8a 100644
--- a/variants/radiomaster_900_bandit/platformio.ini
+++ b/variants/radiomaster_900_bandit/platformio.ini
@@ -6,9 +6,11 @@ build_flags =
   -DRADIOMASTER_900_BANDIT
   -DVTABLES_IN_FLASH=1
   -DCONFIG_DISABLE_HAL_LOCKS=1
+  -DHAS_STK8XXX=1
   -O2
   -Ivariants/radiomaster_900_bandit
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
-  ${esp32_base.lib_deps}
\ No newline at end of file
+  ${esp32_base.lib_deps}
+  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1
diff --git a/variants/rak11310/platformio.ini b/variants/rak11310/platformio.ini
index c7b3504fe..923cedaa3 100644
--- a/variants/rak11310/platformio.ini
+++ b/variants/rak11310/platformio.ini
@@ -3,6 +3,7 @@ extends = rp2040_base
 board = wiscore_rak11300
 upload_protocol = picotool
 # keep an old SDK to use less memory.
+platform = https://github.com/maxgerhardt/platform-raspberrypi.git#v1.2.0-gcc12
 platform_packages = framework-arduinopico@https://github.com/earlephilhower/arduino-pico.git#3.7.2
 
 # add our variants files to the include and src paths
@@ -13,5 +14,5 @@ build_flags = ${rp2040_base.build_flags}
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
 lib_deps =
   ${rp2040_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
+debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/rak2560/RAK9154Sensor.cpp b/variants/rak2560/RAK9154Sensor.cpp
index 9f660947e..43affe581 100644
--- a/variants/rak2560/RAK9154Sensor.cpp
+++ b/variants/rak2560/RAK9154Sensor.cpp
@@ -37,11 +37,11 @@ static void onewire_evt(const uint8_t pid, const uint8_t sid, const SNHUBAPI_EVT
         break;
 
     case SNHUBAPI_EVT_ADD_SID:
-        // LOG_INFO("+ADD:SID:[%02x]\r\n", msg[0]);
+        // LOG_INFO("+ADD:SID:[%02x]", msg[0]);
         break;
 
     case SNHUBAPI_EVT_ADD_PID:
-        // LOG_INFO("+ADD:PID:[%02x]\r\n", msg[0]);
+        // LOG_INFO("+ADD:PID:[%02x]", msg[0]);
 #ifdef BOOT_DATA_REQ
         provision = msg[0];
 #endif
@@ -55,12 +55,12 @@ static void onewire_evt(const uint8_t pid, const uint8_t sid, const SNHUBAPI_EVT
 
     case SNHUBAPI_EVT_SDATA_REQ:
 
-        // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]\r\n",pid,msg[0]);
+        // LOG_INFO("+EVT:PID[%02x],IPSO[%02x]",pid,msg[0]);
         // for( uint16_t i=1; i 0) ? true : false;
 }
-#endif // HAS_RAKPROT
\ No newline at end of file
+#endif // HAS_RAKPROT
diff --git a/variants/rak10701/platformio.ini b/variants/rak_wismeshtap/platformio.ini
similarity index 73%
rename from variants/rak10701/platformio.ini
rename to variants/rak_wismeshtap/platformio.ini
index 4c9bf3b20..bcf46b90d 100644
--- a/variants/rak10701/platformio.ini
+++ b/variants/rak_wismeshtap/platformio.ini
@@ -1,15 +1,19 @@
 ; The very slick RAK wireless RAK10701 Field Tester device.  Note you will have to flash to Arduino bootloader to use this firmware.  Be aware touch is not currently working.
-[env:rak10701]
+[env:rak_wismeshtap]
 extends = nrf52840_base
-board_level = extra
 board = wiscore_rak4631
-build_flags = ${nrf52840_base.build_flags} -Ivariants/rak10701 -D RAK_4631
+build_flags = ${nrf52840_base.build_flags} -Ivariants/rak_wismeshtap -DWISMESH_TAP -DRAK_4631
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
   -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
   -DEINK_DISPLAY_MODEL=GxEPD2_213_BN
   -DEINK_WIDTH=250
   -DEINK_HEIGHT=122
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak10701> + + +
+  -DMESHTASTIC_EXCLUDE_WIFI=1
+  -DMESHTASTIC_EXCLUDE_DETECTIONSENSOR=1
+  -DMESHTASTIC_EXCLUDE_STOREFORWARD=1
+  -DMESHTASTIC_EXCLUDE_POWER_TELEMETRY=1
+  -DMESHTASTIC_EXCLUDE_ATAK=1
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak_wismeshtap> + + +
 lib_deps = 
   ${nrf52840_base.lib_deps}
   ${networking_base.lib_deps}
@@ -21,4 +25,4 @@ lib_deps =
   beegee-tokyo/RAK14014-FT6336U @ 1.0.1
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
\ No newline at end of file
+;upload_protocol = jlink
diff --git a/variants/rak10701/variant.cpp b/variants/rak_wismeshtap/variant.cpp
similarity index 100%
rename from variants/rak10701/variant.cpp
rename to variants/rak_wismeshtap/variant.cpp
diff --git a/variants/rak10701/variant.h b/variants/rak_wismeshtap/variant.h
similarity index 98%
rename from variants/rak10701/variant.h
rename to variants/rak_wismeshtap/variant.h
index c263796ee..c21a11ac1 100644
--- a/variants/rak10701/variant.h
+++ b/variants/rak_wismeshtap/variant.h
@@ -243,7 +243,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 // Therefore must be 1 to keep peripherals powered
 // Power is on the controllable 3V3_S rail
 // #define PIN_GPS_RESET (34)
-#define PIN_GPS_EN PIN_3V3_EN
+// #define PIN_GPS_EN PIN_3V3_EN
 #define PIN_GPS_PPS (17) // Pulse per second input from the GPS
 
 #define GPS_RX_PIN PIN_SERIAL1_RX
@@ -271,13 +271,8 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 
 #define HAS_RTC 1
 
-#define HAS_ETHERNET 1
-
 #define RAK_4631 1
 
-#define PIN_ETHERNET_RESET 21
-#define PIN_ETHERNET_SS PIN_EINK_CS
-#define ETH_SPI_PORT SPI1
 #define AQ_SET_PIN 10
 
 #ifdef __cplusplus
@@ -311,7 +306,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SCREEN_TOUCH_INT WB_IO6
 
 #define CANNED_MESSAGE_MODULE_ENABLE 1
-
+#define USE_VIRTUAL_KEYBOARD 1
 /*----------------------------------------------------------------------------
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/
diff --git a/variants/rp2040-lora/platformio.ini b/variants/rp2040-lora/platformio.ini
index 8499f6f3c..4c578fb2b 100644
--- a/variants/rp2040-lora/platformio.ini
+++ b/variants/rp2040-lora/platformio.ini
@@ -12,5 +12,5 @@ build_flags = ${rp2040_base.build_flags}
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
 lib_deps =
   ${rp2040_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
+debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/rp2040-lora/variant.h b/variants/rp2040-lora/variant.h
index c93105f0e..92b067457 100644
--- a/variants/rp2040-lora/variant.h
+++ b/variants/rp2040-lora/variant.h
@@ -15,7 +15,7 @@
 // rxd = 9
 
 #define EXT_NOTIFY_OUT 22
-#undef BUTTON_PIN // Pin 17 used for antenna switching via DIO4
+#define BUTTON_PIN -1 // Pin 17 used for antenna switching via DIO4
 
 #define LED_PIN PIN_LED
 
@@ -54,7 +54,7 @@
 #define SX126X_DIO1 LORA_DIO1
 #define SX126X_BUSY LORA_BUSY
 #define SX126X_RESET LORA_RESET
-#define SX126X_DIO2_AS_RF_SWITCH  // Antenna switch CTRL
-#define SX126X_POWER_EN LORA_DIO4 // Antenna switch !CTRL via GPIO17
+#define SX126X_DIO2_AS_RF_SWITCH // Antenna switch CTRL
+#define SX126X_RXEN LORA_DIO4    // Antenna switch !CTRL via GPIO17
 // #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 #endif
diff --git a/variants/rpipico/platformio.ini b/variants/rpipico/platformio.ini
index e4b9e479f..9c62ebcb5 100644
--- a/variants/rpipico/platformio.ini
+++ b/variants/rpipico/platformio.ini
@@ -12,5 +12,5 @@ build_flags = ${rp2040_base.build_flags}
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
 lib_deps =
   ${rp2040_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
+debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/rpipico2/platformio.ini b/variants/rpipico2/platformio.ini
index a63414418..24714efd5 100644
--- a/variants/rpipico2/platformio.ini
+++ b/variants/rpipico2/platformio.ini
@@ -12,5 +12,5 @@ build_flags = ${rp2350_base.build_flags}
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m0plus"
 lib_deps =
   ${rp2350_base.lib_deps}
-debug_build_flags = ${rp2350_base.build_flags}
+debug_build_flags = ${rp2350_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/rpipicow/platformio.ini b/variants/rpipicow/platformio.ini
index 2600b4b38..7a43ece3b 100644
--- a/variants/rpipicow/platformio.ini
+++ b/variants/rpipicow/platformio.ini
@@ -14,5 +14,5 @@ build_src_filter = ${rp2040_base.build_src_filter} +
 lib_deps =
   ${rp2040_base.lib_deps}
   ${networking_base.lib_deps}
-debug_build_flags = ${rp2040_base.build_flags}
+debug_build_flags = ${rp2040_base.build_flags}, -g
 debug_tool = cmsis-dap ; for e.g. Picotool
\ No newline at end of file
diff --git a/variants/seeed-sensecap-indicator/platformio.ini b/variants/seeed-sensecap-indicator/platformio.ini
index e6bb2145e..86d6d0412 100644
--- a/variants/seeed-sensecap-indicator/platformio.ini
+++ b/variants/seeed-sensecap-indicator/platformio.ini
@@ -2,7 +2,7 @@
 [env:seeed-sensecap-indicator]
 extends = esp32s3_base
 platform_packages =
-    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#add_tca9535 ; based on 2.0.16
+    platformio/framework-arduinoespressif32 @ https://github.com/mverch67/arduino-esp32.git#aef7fef6de3329ed6f75512d46d63bba12b09bb5 ; add_tca9535 (based on 2.0.16)
 
 board = seeed-sensecap-indicator
 board_check = true
diff --git a/variants/seeed-sensecap-indicator/variant.h b/variants/seeed-sensecap-indicator/variant.h
index d7ed329eb..6028a3ffa 100644
--- a/variants/seeed-sensecap-indicator/variant.h
+++ b/variants/seeed-sensecap-indicator/variant.h
@@ -36,12 +36,14 @@
 #define TOUCH_I2C_PORT 0
 #define TOUCH_SLAVE_ADDRESS 0x48
 
-// Buzzer
-#define PIN_BUZZER 19
+// in future, we may want to add a buzzer and add all sensors to the indicator via a data protocol for now only GPS is supported
+// // Buzzer
+// #define PIN_BUZZER 19
 
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
+#define GPS_DEFAULT_NOT_PRESENT 1
+#define GPS_RX_PIN 20
+#define GPS_TX_PIN 19
+#define HAS_GPS 1
 
 #define USE_SX1262
 #define USE_SX1268
@@ -62,3 +64,6 @@
 #define SX126X_BUSY LORA_DIO2
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1
diff --git a/variants/seeed_xiao_s3/variant.h b/variants/seeed_xiao_s3/variant.h
index ab886d354..8f9282a7a 100644
--- a/variants/seeed_xiao_s3/variant.h
+++ b/variants/seeed_xiao_s3/variant.h
@@ -41,7 +41,7 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
     L76K Expansion Board can not directly used, L76K Reset Pin needs to override or physically remove it,
     otherwise it will conflict with the SPI pins
 */
-// #define GPS_L76K
+#define GPS_L76K
 #ifdef GPS_L76K
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
@@ -80,5 +80,7 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
 
 //  DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
 #define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_RXEN 38
+#define SX126X_TXEN RADIOLIB_NC
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
-#endif
\ No newline at end of file
+#endif
diff --git a/variants/t-deck/platformio.ini b/variants/t-deck/platformio.ini
index a63ff57a7..16769e2f2 100644
--- a/variants/t-deck/platformio.ini
+++ b/variants/t-deck/platformio.ini
@@ -15,5 +15,5 @@ build_flags = ${esp32_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
 	lovyan03/LovyanGFX@^1.1.9
-  earlephilhower/ESP8266Audio@^1.9.7
+  earlephilhower/ESP8266Audio@^1.9.9
   earlephilhower/ESP8266SAM@^1.0.1
\ No newline at end of file
diff --git a/variants/t-deck/variant.h b/variants/t-deck/variant.h
index 9860d608f..91c12ab3d 100644
--- a/variants/t-deck/variant.h
+++ b/variants/t-deck/variant.h
@@ -29,7 +29,7 @@
 
 #define BUTTON_PIN 0
 // #define BUTTON_NEED_PULLUP
-
+#define GPS_DEFAULT_NOT_PRESENT 1
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
 
@@ -73,6 +73,7 @@
 #define DAC_I2S_BCK 7
 #define DAC_I2S_WS 5
 #define DAC_I2S_DOUT 6
+#define DAC_I2S_MCLK 21 // GPIO lrck mic
 
 // LoRa
 #define USE_SX1262
diff --git a/variants/t-echo/variant.h b/variants/t-echo/variant.h
index 9abb4ea69..365dfd804 100644
--- a/variants/t-echo/variant.h
+++ b/variants/t-echo/variant.h
@@ -216,6 +216,8 @@ External serial flash WP25R1635FZUIL0
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (2.0F)
 
+#define NO_EXT_GPIO 1
+
 #define HAS_RTC 1
 
 #ifdef __cplusplus
diff --git a/variants/t-watch-s3/platformio.ini b/variants/t-watch-s3/platformio.ini
index 1f5fc278b..005c4d021 100644
--- a/variants/t-watch-s3/platformio.ini
+++ b/variants/t-watch-s3/platformio.ini
@@ -9,10 +9,12 @@ build_flags = ${esp32_base.build_flags}
   -DT_WATCH_S3
   -Ivariants/t-watch-s3
   -DPCF8563_RTC=0x51
+  -DHAS_BMA423=1
 
 lib_deps = ${esp32s3_base.lib_deps}
 	lovyan03/LovyanGFX@^1.1.9
   lewisxhe/PCF8563_Library@1.0.1
   adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.7
-  earlephilhower/ESP8266SAM@^1.0.1
\ No newline at end of file
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
+  lewisxhe/SensorLib@0.2.0
diff --git a/variants/t-watch-s3/variant.h b/variants/t-watch-s3/variant.h
index 9f939d859..5a6aebfa2 100644
--- a/variants/t-watch-s3/variant.h
+++ b/variants/t-watch-s3/variant.h
@@ -34,6 +34,7 @@
 #define DAC_I2S_BCK 48
 #define DAC_I2S_WS 15
 #define DAC_I2S_DOUT 46
+#define DAC_I2S_MCLK 0
 
 #define HAS_AXP2101
 
@@ -71,3 +72,6 @@
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
 // the sx1262interface code)
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1
diff --git a/variants/tlora_t3s3_epaper/variant.h b/variants/tlora_t3s3_epaper/variant.h
index 461ce0c31..732869b20 100644
--- a/variants/tlora_t3s3_epaper/variant.h
+++ b/variants/tlora_t3s3_epaper/variant.h
@@ -19,6 +19,7 @@
 #define I2C_SCL SCL
 
 // external qwiic connector
+#define GPS_DEFAULT_NOT_PRESENT 1
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
 
diff --git a/variants/tlora_v1/platformio.ini b/variants/tlora_v1/platformio.ini
index c90daed90..65ec4bcdc 100644
--- a/variants/tlora_v1/platformio.ini
+++ b/variants/tlora_v1/platformio.ini
@@ -1,4 +1,5 @@
 [env:tlora-v1]
+board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
diff --git a/variants/tlora_v1_3/platformio.ini b/variants/tlora_v1_3/platformio.ini
index 9d9f41a7c..99df28e56 100644
--- a/variants/tlora_v1_3/platformio.ini
+++ b/variants/tlora_v1_3/platformio.ini
@@ -1,4 +1,5 @@
 [env:tlora_v1_3]
+board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
diff --git a/variants/tlora_v2/platformio.ini b/variants/tlora_v2/platformio.ini
index 8710068af..8087a30e3 100644
--- a/variants/tlora_v2/platformio.ini
+++ b/variants/tlora_v2/platformio.ini
@@ -1,4 +1,5 @@
 [env:tlora-v2]
+board_level = extra
 extends = esp32_base
 board = ttgo-lora32-v1
 build_flags = 
diff --git a/variants/tlora_v2_1_16/variant.h b/variants/tlora_v2_1_16/variant.h
index 8bb5ce3b1..48c069ab7 100644
--- a/variants/tlora_v2_1_16/variant.h
+++ b/variants/tlora_v2_1_16/variant.h
@@ -8,10 +8,7 @@
 #define I2C_SDA 21 // I2C pins for this board
 #define I2C_SCL 22
 
-#define LED_PIN 25    // If defined we will blink this LED
-#define BUTTON_PIN 12 // If defined, this will be used for user button presses,
-
-#define BUTTON_NEED_PULLUP
+#define LED_PIN 25 // If defined we will blink this LED
 
 #define USE_RF95
 #define LORA_DIO0 26 // a No connect on the SX1262 module
diff --git a/variants/tlora_v2_1_16_tcxo/platformio.ini b/variants/tlora_v2_1_16_tcxo/platformio.ini
index e54c1a920..538fd81b0 100644
--- a/variants/tlora_v2_1_16_tcxo/platformio.ini
+++ b/variants/tlora_v2_1_16_tcxo/platformio.ini
@@ -1,5 +1,6 @@
 [env:tlora-v2-1-1_6-tcxo]
 extends = esp32_base
+board_level = extra
 board = ttgo-lora32-v21
 build_flags = 
   ${esp32_base.build_flags}
diff --git a/variants/tlora_v2_1_18/platformio.ini b/variants/tlora_v2_1_18/platformio.ini
index 36d6a3157..48a001ced 100644
--- a/variants/tlora_v2_1_18/platformio.ini
+++ b/variants/tlora_v2_1_18/platformio.ini
@@ -1,5 +1,6 @@
 [env:tlora-v2-1-1_8]
 extends = esp32_base
+board_level = extra
 board = ttgo-lora32-v21
 
 build_flags = 
diff --git a/variants/tlora_v3_3_0_tcxo/platformio.ini b/variants/tlora_v3_3_0_tcxo/platformio.ini
new file mode 100644
index 000000000..4066d64b0
--- /dev/null
+++ b/variants/tlora_v3_3_0_tcxo/platformio.ini
@@ -0,0 +1,11 @@
+[env:tlora-v3-3-0-tcxo]
+extends = esp32_base
+board = ttgo-lora32-v21
+board_level = extra
+build_flags = 
+  ${esp32_base.build_flags}
+  -D TLORA_V2_1_16
+  -I variants/tlora_v2_1_16
+  -D GPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -D LORA_TCXO_GPIO=12
+  -D BUTTON_PIN=0
\ No newline at end of file
diff --git a/variants/tracker-t1000-e/platformio.ini b/variants/tracker-t1000-e/platformio.ini
index dfc72f3f0..0bce9fbb5 100644
--- a/variants/tracker-t1000-e/platformio.ini
+++ b/variants/tracker-t1000-e/platformio.ini
@@ -1,16 +1,15 @@
-; tracker-t1000-e  v0.9.1
 [env:tracker-t1000-e]
 extends = nrf52840_base
 board = tracker-t1000-e
-; board_level = extra
-; platform = https://github.com/maxgerhardt/platform-nordicnrf52#cac6fcf943a41accd2aeb4f3659ae297a73f422e
 build_flags = ${nrf52840_base.build_flags} -Ivariants/tracker-t1000-e -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52 -DTRACKER_T1000_E
   -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
-  -DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
+  -DGPS_POWER_TOGGLE
+  -DMESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR_EXTERNAL=1
 board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/tracker-t1000-e>
 lib_deps = 
   ${nrf52840_base.lib_deps}
+  https://github.com/meshtastic/QMA6100P_Arduino_Library.git#14c900b8b2e4feaac5007a7e41e0c1b7f0841136
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-upload_protocol = nrfutil
+upload_protocol = nrfutil
\ No newline at end of file
diff --git a/variants/tracker-t1000-e/variant.cpp b/variants/tracker-t1000-e/variant.cpp
index 85e0c44f3..8096705d0 100644
--- a/variants/tracker-t1000-e/variant.cpp
+++ b/variants/tracker-t1000-e/variant.cpp
@@ -40,7 +40,7 @@ void initVariant()
     digitalWrite(PIN_3V3_EN, HIGH);
 
     pinMode(PIN_3V3_ACC_EN, OUTPUT);
-    digitalWrite(PIN_3V3_ACC_EN, LOW);
+    digitalWrite(PIN_3V3_ACC_EN, HIGH);
 
     pinMode(BUZZER_EN_PIN, OUTPUT);
     digitalWrite(BUZZER_EN_PIN, HIGH);
diff --git a/variants/tracker-t1000-e/variant.h b/variants/tracker-t1000-e/variant.h
index b8eb59b31..6a1f99600 100644
--- a/variants/tracker-t1000-e/variant.h
+++ b/variants/tracker-t1000-e/variant.h
@@ -52,7 +52,7 @@ extern "C" {
 #define LED_BLUE -1    // Actually green
 #define LED_STATE_ON 1 // State when LED is lit
 
-#define BUTTON_PIN (0 + 6) // P0.6
+#define BUTTON_PIN (0 + 6) // P0.06
 #define BUTTON_ACTIVE_LOW false
 #define BUTTON_ACTIVE_PULLUP false
 #define BUTTON_SENSE_TYPE 0x6
@@ -61,9 +61,11 @@ extern "C" {
 
 #define WIRE_INTERFACES_COUNT 1
 
-// unused pins
-#define PIN_WIRE_SDA (0 + 9)  // P0.26
-#define PIN_WIRE_SCL (0 + 10) // P0.27
+#define PIN_WIRE_SDA (0 + 26)      // P0.26
+#define PIN_WIRE_SCL (0 + 27)      // P0.27
+#define I2C_NO_RESCAN              // I2C is a bit finicky, don't scan too much
+#define HAS_QMA6100P               // very rare beast, only on this board.
+#define QMA_6100P_INT_PIN (32 + 2) // P1.02
 
 /*
  * Serial interfaces
@@ -116,14 +118,22 @@ extern "C" {
 #define PIN_GPS_RESET (32 + 15) // P1.15
 #define GPS_RESET_MODE HIGH
 
-#define GPS_VRTC_EN (0 + 8)      // P0.8, awlays high
-#define GPS_SLEEP_INT (32 + 12)  // P1.12, awlays high
+#define GPS_VRTC_EN (0 + 8)      // P0.8, always high
+#define GPS_SLEEP_INT (32 + 12)  // P1.12, always high
 #define GPS_RTC_INT (0 + 15)     // P0.15, normal is LOW, wake by HIGH
-#define GPS_RESETB_OUT (32 + 14) // P1.14, awlays input pull_up
+#define GPS_RESETB_OUT (32 + 14) // P1.14, always input pull_up
 
 #define GPS_FIX_HOLD_TIME 15000 // ms
-#define BATTERY_PIN 2
+#define BATTERY_PIN 2           // P0.02/AIN0, BAT_ADC
+#define BATTERY_IMMUTABLE
 #define ADC_MULTIPLIER (2.0F)
+// P0.04/AIN2 is VCC_ADC, P0.05/AIN3 is CHARGER_DET, P1.03 is CHARGE_STA, P1.04 is CHARGE_DONE
+
+#define EXT_CHRG_DETECT (32 + 3) // P1.03
+#define EXT_CHRG_DETECT_VALUE LOW
+// #define EXT_IS_CHRGD (32 + 4)  // P1.04
+// #define EXT_IS_CHRGD_VALUE LOW
+#define EXT_PWR_DETECT (0 + 5) // P0.05
 
 #define ADC_RESOLUTION 14
 #define BATTERY_SENSE_RESOLUTION_BITS 12
@@ -133,13 +143,13 @@ extern "C" {
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 
 // Buzzer
-#define BUZZER_EN_PIN (32 + 5) // P1.05, awlays high
+#define BUZZER_EN_PIN (32 + 5) // P1.05, always high
 #define PIN_BUZZER (0 + 25)    // P0.25, pwm output
 
 #define T1000X_SENSOR_EN
 #define T1000X_VCC_PIN (0 + 4)  // P0.4
-#define T1000X_NTC_PIN (0 + 31) // P0.31
-#define T1000X_LUX_PIN (0 + 29) // P0.29
+#define T1000X_NTC_PIN (0 + 31) // P0.31/AIN7
+#define T1000X_LUX_PIN (0 + 29) // P0.29/AIN5
 
 #ifdef __cplusplus
 }
diff --git a/variants/unphone/pins_arduino.h b/variants/unphone/pins_arduino.h
new file mode 100644
index 000000000..74067359f
--- /dev/null
+++ b/variants/unphone/pins_arduino.h
@@ -0,0 +1,59 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include 
+
+#define USB_VID 0x16D0
+#define USB_PID 0x1178
+
+#define LED_BUILTIN 13
+#define BUILTIN_LED LED_BUILTIN // backward compatibility
+
+static const uint8_t TX = 43;
+static const uint8_t RX = 44;
+
+static const uint8_t SDA = 3;
+static const uint8_t SCL = 4;
+
+static const uint8_t SS = 13;
+static const uint8_t MOSI = 40;
+static const uint8_t MISO = 41;
+static const uint8_t SCK = 39;
+
+static const uint8_t A0 = 1;
+static const uint8_t A1 = 2;
+static const uint8_t A2 = 8;
+static const uint8_t A3 = 9;
+static const uint8_t A4 = 5;
+static const uint8_t A5 = 6;
+static const uint8_t A6 = 14;
+static const uint8_t A7 = 7;
+static const uint8_t A8 = 15;
+static const uint8_t A9 = 33;
+static const uint8_t A10 = 27;
+static const uint8_t A11 = 12;
+static const uint8_t A12 = 13;
+static const uint8_t A13 = 14;
+static const uint8_t A14 = 15;
+static const uint8_t A15 = 16;
+static const uint8_t A16 = 17;
+static const uint8_t A17 = 18;
+static const uint8_t A18 = 19;
+static const uint8_t A19 = 20;
+
+static const uint8_t T1 = 2;
+static const uint8_t T2 = 8;
+static const uint8_t T3 = 9;
+static const uint8_t T4 = 5;
+static const uint8_t T5 = 6;
+static const uint8_t T6 = 14;
+static const uint8_t T7 = 7;
+static const uint8_t T8 = 15;
+static const uint8_t T9 = 33;
+static const uint8_t T10 = 27;
+static const uint8_t T11 = 12;
+static const uint8_t T12 = 13;
+static const uint8_t T13 = 14;
+static const uint8_t T14 = 15;
+
+#endif /* Pins_Arduino_h */
diff --git a/variants/unphone/platformio.ini b/variants/unphone/platformio.ini
index dbfa0599d..489c70f99 100644
--- a/variants/unphone/platformio.ini
+++ b/variants/unphone/platformio.ini
@@ -13,7 +13,6 @@ build_unflags =
   -D ARDUINO_USB_MODE
 
 build_flags = ${esp32_base.build_flags}
-  ;-D BOARD_HAS_PSRAM // what's up with this - doesn't seem to be recognised at boot
   -D UNPHONE
   -I variants/unphone
   -D ARDUINO_USB_MODE=0
@@ -27,6 +26,52 @@ build_flags = ${esp32_base.build_flags}
 build_src_filter = ${esp32_base.build_src_filter} +<../variants/unphone>
 
 lib_deps = ${esp32s3_base.lib_deps}
-  lovyan03/LovyanGFX                                   @ ^1.1.8
-  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic   @ ^9.0.0
-  adafruit/Adafruit NeoPixel @ ^1.12.0
\ No newline at end of file
+  lovyan03/LovyanGFX@ 1.1.12
+  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
+  adafruit/Adafruit NeoPixel @ ^1.12.0
+
+
+[env:unphone-tft]
+extends = esp32s3_base
+board_level = extra
+board = unphone
+board_build.partitions = default_8MB.csv
+monitor_speed = 115200
+monitor_filters = esp32_exception_decoder
+build_flags = ${esp32_base.build_flags}
+  -D UNPHONE
+  -D UNPHONE_ACCEL=0
+  -D UNPHONE_TOUCHS=0
+  -D UNPHONE_SDCARD=0
+  -D UNPHONE_UI0=0
+  -D UNPHONE_LORA=0
+  -D UNPHONE_FACTORY_MODE=0
+  -D MAX_THREADS=40
+  -D HAS_SCREEN=0
+  -D HAS_TFT=1
+  -D RAM_SIZE=512
+	-D LV_LVGL_H_INCLUDE_SIMPLE
+	-D LV_CONF_INCLUDE_SIMPLE
+	-D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_BUILD_TEST=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+;  -D CALIBRATE_TOUCH=0
+  -D LGFX_DRIVER=LGFX_UNPHONE_V9
+  -D VIEW_320x240
+;	-D USE_DOUBLE_BUFFER
+  -D USE_PACKET_API
+	-I lib/device-ui/generated/ui_320x240
+  -I variants/unphone
+
+build_src_filter = ${esp32_base.build_src_filter} +<../variants/unphone>
+  +<../lib/device-ui/generated/ui_320x240>
+  +<../lib/device-ui/resources>
+  +<../lib/device-ui/source>
+
+lib_deps = ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@^1.1.12
+  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
+  adafruit/Adafruit NeoPixel@1.12.0
\ No newline at end of file
diff --git a/version.properties b/version.properties
index be97dacb5..800529e39 100644
--- a/version.properties
+++ b/version.properties
@@ -1,4 +1,4 @@
 [VERSION]  
 major = 2
 minor = 5
-build = 7
+build = 19