Merge branch 'master' into arduino-esp32-v3.2

variants/esp32s3/ELECROW-ThinkNode-M5/variant.h

@@ -61,7 +61,7 @@
 #define LORA_DIO1 SX126X_DIO1
 
 #define USE_EINK
-#define PIN_EINK_EN -1    // Note: this is really just backlight power
+// Note: this is really just backlight power
 #define PCA_PIN_EINK_EN 5 // This is the pin number on the GPIO expander
 #define PIN_EINK_CS 39
 #define PIN_EINK_BUSY 42

variants/esp32s3/elecrow_panel/platformio.ini

@@ -19,8 +19,6 @@ build_flags = ${esp32s3_base.build_flags} -Os
   -D MESHTASTIC_EXCLUDE_SERIAL=1
   -D MESHTASTIC_EXCLUDE_SOCKETAPI=1
   -D MESHTASTIC_EXCLUDE_SCREEN=1
-  -D MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR=1
-  -D HAS_TELEMETRY=0
   -D CONFIG_DISABLE_HAL_LOCKS=1
   -D USE_PIN_BUZZER
   -D HAS_SCREEN=0

variants/esp32s3/rak_wismesh_tap_v2/pins_arduino.h

@@ -0,0 +1,28 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include "variant.h"
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// The default Wire will be mapped to PMU and RTC
+static const uint8_t SDA = 9;
+static const uint8_t SCL = 40;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 12;
+static const uint8_t MOSI = 11;
+static const uint8_t MISO = 10;
+static const uint8_t SCK = 13;
+
+#define SPI_MOSI (11)
+#define SPI_SCK (13)
+#define SPI_MISO (10)
+#define SPI_CS (12)
+
+// LEDs
+#define LED_BUILTIN LED_GREEN
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/rak_wismesh_tap_v2/platformio.ini

@@ -0,0 +1,87 @@
+; rak_wismeshtap2 rak3112
+
+[rak_wismeshtap_s3]
+extends = esp32s3_base
+board = wiscore_rak3312
+board_check = true
+upload_protocol = esptool
+board_build.partitions = default_8MB.csv
+
+build_flags = 
+  ${esp32_base.build_flags} 
+  -D RAK3312
+  -D RAK_WISMESH_TAP_V2 
+  -I variants/esp32s3/rak_wismesh_tap_v2
+
+lib_deps =
+  ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@^1.2.0
+
+[ft5x06]
+extends = mesh_tab_base
+build_flags = 
+  -D LGFX_TOUCH=FT5x06
+  -D LGFX_TOUCH_I2C_FREQ=100000
+  -D LGFX_TOUCH_I2C_PORT=0
+  -D LGFX_TOUCH_I2C_ADDR=0x38
+  -D LGFX_TOUCH_I2C_SDA=9
+  -D LGFX_TOUCH_I2C_SCL=40
+  -D LGFX_TOUCH_RST=-1
+  -D LGFX_TOUCH_INT=39
+
+[env:rak_wismesh_tap_v2-tft]
+extends = rak_wismeshtap_s3
+
+build_flags =
+  ${rak_wismeshtap_s3.build_flags}
+  -D CONFIG_ARDUHAL_ESP_LOG
+  -D CONFIG_ARDUHAL_LOG_COLORS=1
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D LV_BUILD_TEST=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SDCARD
+  -D HAS_SCREEN=0
+  -D HAS_TFT=1
+  -D USE_PIN_BUZZER=PIN_BUZZER
+  -D RAM_SIZE=5120
+  -D LGFX_DRIVER_TEMPLATE
+  -D LGFX_DRIVER=LGFX_GENERIC
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_GENERIC.h\"
+  -D LGFX_PIN_SCK=13
+  -D LGFX_PIN_MOSI=11
+  -D LGFX_PIN_MISO=10
+  -D LGFX_PIN_DC=42
+  -D LGFX_PIN_CS=12
+  -D LGFX_PIN_RST=-1
+  -D LGFX_PIN_BL=41
+  -D VIEW_320x240
+  -D USE_PACKET_API
+  ${ft5x06.build_flags}
+  -D LGFX_SCREEN_WIDTH=240
+  -D LGFX_SCREEN_HEIGHT=320
+  -D LGFX_PANEL=ST7789
+  -D LGFX_ROTATION=1
+  -D LGFX_TOUCH_X_MIN=0
+  -D LGFX_TOUCH_X_MAX=239
+  -D LGFX_TOUCH_Y_MIN=0
+  -D LGFX_TOUCH_Y_MAX=319
+  -D LGFX_TOUCH_ROTATION=2
+  -D LGFX_CFG_HOST=SPI3_HOST
+  -D MAP_FULL_REDRAW=1
+
+lib_deps =
+  ${rak_wismeshtap_s3.lib_deps}
+  ${device-ui_base.lib_deps}
+
+

variants/esp32s3/rak_wismesh_tap_v2/variant.h

@@ -0,0 +1,71 @@
+#ifndef _VARIANT_RAK_WISMESHTAP_V2_H
+#define _VARIANT_RAK_WISMESHTAP_V2_H
+
+#define I2C_SDA 9
+#define I2C_SCL 40
+
+#define USE_SX1262
+
+#define LORA_SCK 5
+#define LORA_MISO 3
+#define LORA_MOSI 6
+#define LORA_CS 7
+#define LORA_RESET 8
+
+#ifdef USE_SX1262
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 47
+#define SX126X_BUSY 48
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+#endif
+
+#define SX126X_POWER_EN (4)
+
+#define PIN_POWER_EN PIN_3V3_EN
+#define PIN_3V3_EN (14)
+
+#define LED_GREEN 46
+#define LED_BLUE 45
+
+#define PIN_LED1 LED_GREEN
+#define PIN_LED2 LED_BLUE
+
+#define LED_CONN LED_BLUE
+#define LED_PIN LED_GREEN
+#define ledOff(pin) pinMode(pin, INPUT)
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+#define HAS_GPS 1
+#define GPS_TX_PIN 43
+#define GPS_RX_PIN 44
+
+#define SPI_MOSI (11)
+#define SPI_SCK (13)
+#define SPI_MISO (10)
+#define SPI_CS (12)
+
+#define HAS_BUTTON 1
+#define BUTTON_PIN 0
+
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+#define USE_VIRTUAL_KEYBOARD 1
+
+#define BATTERY_PIN 1
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define ADC_MULTIPLIER 1.667
+
+#define PIN_BUZZER 38
+
+#define HAS_SDCARD 1
+#define SDCARD_USE_SPI1 1
+#define SDCARD_CS 2
+
+#define SPI_FREQUENCY 40000000
+#define SPI_READ_FREQUENCY 16000000
+
+#define SD_SPI_FREQUENCY 50000000
+
+#endif

variants/esp32s3/t-deck-pro/variant.h

@@ -92,3 +92,12 @@
 #define SX126X_DIO3_TCXO_VOLTAGE 2.4
 // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for the sx1262interface
 // code)
+
+#define MODEM_POWER_EN  41
+#define MODEM_PWRKEY    40
+#define MODEM_RST  9
+#define MODEM_RI  7
+#define MODEM_DTR  8
+#define MODEM_RX  10
+#define MODEM_TX  11
+

variants/esp32s3/tlora-pager/pins_arduino.h

@@ -0,0 +1,19 @@
+#ifndef Pins_Arduino_h
+#define Pins_Arduino_h
+
+#include <stdint.h>
+
+#define USB_VID 0x303a
+#define USB_PID 0x1001
+
+// used for keyboard, battery gauge, charger and haptic driver
+static const uint8_t SDA = 3;
+static const uint8_t SCL = 2;
+
+// Default SPI will be mapped to Radio
+static const uint8_t SS = 36;
+static const uint8_t MOSI = 34;
+static const uint8_t MISO = 33;
+static const uint8_t SCK = 35;
+
+#endif /* Pins_Arduino_h */

variants/esp32s3/tlora-pager/platformio.ini

@@ -0,0 +1,71 @@
+; LilyGo T-Lora-Pager
+[env:tlora-pager]
+extends = esp32s3_base
+board = t-deck-pro ; same as T-Deck Pro
+board_check = true
+board_build.partitions = default_16MB.csv
+upload_protocol = esptool
+
+build_flags = ${esp32s3_base.build_flags} 
+  -I variants/esp32s3/tlora-pager
+  -D T_LORA_PAGER 
+  -D BOARD_HAS_PSRAM
+  -D GPS_POWER_TOGGLE
+  -D HAS_SDCARD
+  -D SDCARD_USE_SPI1
+  -D ENABLE_ROTARY_PULLUP
+  -D ENABLE_BUTTON_PULLUP
+  -D HALF_STEP
+
+lib_deps = ${esp32s3_base.lib_deps}
+  lovyan03/LovyanGFX@1.2.7
+  earlephilhower/ESP8266Audio@1.9.9
+  earlephilhower/ESP8266SAM@1.0.1
+  adafruit/Adafruit DRV2605 Library@1.2.4
+  lewisxhe/PCF8563_Library@1.0.1
+  lewisxhe/SensorLib@0.3.1
+  https://github.com/pschatzmann/arduino-audio-driver/archive/refs/tags/v0.1.3.zip
+  https://github.com/mverch67/BQ27220/archive/07d92be846abd8a0258a50c23198dac0858b22ed.zip
+  https://github.com/mverch67/RotaryEncoder/archive/25a59d5745a6645536f921427d80b08e78f886d4.zip
+
+[env:tlora-pager-tft]
+board_level = extra
+extends = env:tlora-pager
+build_flags =
+  ${env:tlora-pager.build_flags}
+  -D CONFIG_DISABLE_HAL_LOCKS=1
+  -D INPUTDRIVER_ROTARY_TYPE=1
+  -D INPUTDRIVER_ROTARY_UP=40
+  -D INPUTDRIVER_ROTARY_DOWN=41
+  -D INPUTDRIVER_ROTARY_BTN=7
+  -D INPUTDRIVER_BUTTON_TYPE=0
+  -D HAS_SCREEN=1
+  -D HAS_TFT=1
+  -D USE_I2S_BUZZER
+  -D RAM_SIZE=5120
+  -D LV_LVGL_H_INCLUDE_SIMPLE
+  -D LV_CONF_INCLUDE_SIMPLE
+  -D LV_COMP_CONF_INCLUDE_SIMPLE
+  -D LV_USE_SYSMON=0
+  -D LV_USE_PROFILER=0
+  -D LV_USE_PERF_MONITOR=0
+  -D LV_USE_MEM_MONITOR=0
+  -D LV_USE_LOG=0
+  -D USE_LOG_DEBUG
+  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
+  -D RADIOLIB_SPI_PARANOID=0
+  -D LGFX_SCREEN_WIDTH=222
+  -D LGFX_SCREEN_HEIGHT=480
+  -D DISPLAY_SIZE=480x222 ; landscape mode
+  -D DISPLAY_SET_RESOLUTION
+  -D LGFX_DRIVER=LGFX_TLORA_PAGER
+  -D GFX_DRIVER_INC=\"graphics/LGFX/LGFX_T_LORA_PAGER.h\"
+;  -D LVGL_DRIVER=LVGL_T_LORA_PAGER
+;  -D LV_USE_ST7796=1
+  -D VIEW_480x222
+  -D USE_PACKET_API
+  -D MAP_FULL_REDRAW
+
+lib_deps =
+  ${env:tlora-pager.lib_deps}
+  ${device-ui_base.lib_deps}

variants/esp32s3/tlora-pager/variant.h

@@ -0,0 +1,125 @@
+// ST7796 TFT LCD
+#define TFT_CS 38
+#define ST7796_CS TFT_CS
+#define ST7796_RS 37    // DC
+#define ST7796_SDA MOSI // MOSI
+#define ST7796_SCK SCK
+#define ST7796_RESET -1
+#define ST7796_MISO MISO
+#define ST7796_BUSY -1
+#define ST7796_BL 42
+#define ST7796_SPI_HOST SPI2_HOST
+#define TFT_BL 42
+#define SPI_FREQUENCY 75000000
+#define SPI_READ_FREQUENCY 16000000
+#define TFT_HEIGHT 480
+#define TFT_WIDTH 222
+#define TFT_OFFSET_X 49
+#define TFT_OFFSET_Y 0
+#define TFT_OFFSET_ROTATION 3
+#define SCREEN_ROTATE
+#define SCREEN_TRANSITION_FRAMERATE 5
+#define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+
+#define I2C_SDA SDA
+#define I2C_SCL SCL
+
+#define USE_POWERSAVE
+#define SLEEP_TIME 120
+
+// GNNS
+#define HAS_GPS 1
+#define GPS_BAUDRATE 38400
+#define GPS_RX_PIN 4
+#define GPS_TX_PIN 12
+#define PIN_GPS_PPS 13
+
+// PCF8563 RTC Module
+#if __has_include("pcf8563.h")
+#include "pcf8563.h"
+#endif
+#define PCF8563_RTC 0x51
+#define HAS_RTC 1
+
+// Rotary
+#define ROTARY_A (40)
+#define ROTARY_B (41)
+#define ROTARY_PRESS (7)
+
+#define BUTTON_PIN 0
+
+// SPI interface SD card slot
+#define SPI_MOSI MOSI
+#define SPI_SCK SCK
+#define SPI_MISO MISO
+#define SPI_CS 21
+#define SDCARD_CS SPI_CS
+#define SD_SPI_FREQUENCY 75000000U
+
+// TCA8418 keyboard
+#define I2C_NO_RESCAN
+#define KB_BL_PIN 46
+#define KB_INT 6
+#define CANNED_MESSAGE_MODULE_ENABLE 1
+
+// audio codec ES8311
+#define HAS_I2S
+#define DAC_I2S_BCK 11
+#define DAC_I2S_WS 18
+#define DAC_I2S_DOUT 45
+#define DAC_I2S_DIN 17
+#define DAC_I2S_MCLK 10
+
+// gyroscope BHI260AP
+#define HAS_BHI260AP
+
+// battery charger BQ25896
+#define HAS_PPM 1
+#define XPOWERS_CHIP_BQ25896
+
+// battery quality management BQ27220
+#define HAS_BQ27220 1
+#define BQ27220_I2C_SDA SDA
+#define BQ27220_I2C_SCL SCL
+#define BQ27220_DESIGN_CAPACITY 1500
+
+// NFC ST25R3916
+#define NFC_INT 5
+#define NFC_CS 39
+
+// External expansion chip XL9555
+#define USE_XL9555
+#define EXPANDS_DRV_EN (0)
+#define EXPANDS_AMP_EN (1)
+#define EXPANDS_KB_RST (2)
+#define EXPANDS_LORA_EN (3)
+#define EXPANDS_GPS_EN (4)
+#define EXPANDS_NFC_EN (5)
+#define EXPANDS_GPS_RST (7)
+#define EXPANDS_KB_EN (8)
+#define EXPANDS_GPIO_EN (9)
+#define EXPANDS_SD_DET (10)
+#define EXPANDS_SD_PULLEN (11)
+#define EXPANDS_SD_EN (12)
+
+// LoRa
+#define USE_SX1262
+#define USE_SX1268
+
+#define LORA_SCK 35
+#define LORA_MISO 33
+#define LORA_MOSI 34
+#define LORA_CS 36
+
+#define LORA_DIO0 -1 // a No connect on the SX1262 module
+#define LORA_RESET 47
+#define LORA_DIO1 14 // SX1262 IRQ
+#define LORA_DIO2 48 // SX1262 BUSY
+#define LORA_DIO3    // Not connected on PCB, but internally on the TTGO SX1262, if DIO3 is high the TXCO is enabled
+
+#define SX126X_CS LORA_CS
+#define SX126X_DIO1 LORA_DIO1
+#define SX126X_BUSY LORA_DIO2
+#define SX126X_RESET LORA_RESET
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 3.0

variants/esp32s3/unphone/platformio.ini

@@ -32,6 +32,7 @@ lib_deps = ${esp32s3_base.lib_deps}
 
 
 [env:unphone-tft]
+board_level = extra
 extends = env:unphone
 build_flags =
   ${env:unphone.build_flags}
@@ -52,8 +53,6 @@ build_flags =
   -D LV_USE_PERF_MONITOR=0
   -D LV_USE_MEM_MONITOR=0
   -D LV_USE_LOG=0
-  -D USE_LOG_DEBUG
-  -D LOG_DEBUG_INC=\"DebugConfiguration.h\"
   -D LGFX_SCREEN_WIDTH=320
   -D LGFX_SCREEN_HEIGHT=480
   -D DISPLAY_SIZE=320x480 ; portrait mode