Merge branch 'develop' into sfpp

2026-01-30 05:32:08 +00:00 · 2026-01-28 15:00:12 -06:00
parent f36406e5ef 1d219a93ab
commit 338dd119fb
137 changed files with 3479 additions and 1323 deletions
--- a/variants/esp32/chatter2/platformio.ini
+++ b/variants/esp32/chatter2/platformio.ini
@@ -12,4 +12,4 @@ build_flags =
 lib_deps =
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
--- a/variants/esp32/chatter2/variant.h
+++ b/variants/esp32/chatter2/variant.h
@@ -79,7 +79,7 @@
                           // lower dB for lower voltage rnage
 #define ADC_MULTIPLIER 5.0 // VBATT---10k--pin34---2.5K---GND
 // Chatter2 uses 3 AAA cells
-#define CELL_TYPE_ALKALINE
+#define OCV_ARRAY 1580, 1400, 1350, 1300, 1280, 1250, 1230, 1190, 1150, 1100, 1000
 #define NUM_CELLS 3
 #undef EXT_PWR_DETECT

--- a/variants/esp32/esp32-common.ini
+++ b/variants/esp32/esp32-common.ini
@@ -59,13 +59,13 @@ lib_deps =
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
  h2zero/NimBLE-Arduino@^1.4.3
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0

--- a/variants/esp32/esp32.ini
+++ b/variants/esp32/esp32.ini
@@ -17,12 +17,12 @@ lib_deps =
  ${environmental_extra_no_bsec.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-esp32_https_server packageName=https://github.com/meshtastic/esp32_https_server gitBranch=master
-  https://github.com/meshtastic/esp32_https_server/archive/3223704846752e6d545139204837bdb2a55459ca.zip
+  https://github.com/meshtastic/esp32_https_server/archive/b0f3960b3e8444563280656d88e22b5899481884.zip
  # renovate: datasource=custom.pio depName=NimBLE-Arduino packageName=h2zero/library/NimBLE-Arduino
  h2zero/NimBLE-Arduino@^1.4.3
  # renovate: datasource=git-refs depName=libpax packageName=https://github.com/dbinfrago/libpax gitBranch=master
  https://github.com/dbinfrago/libpax/archive/3cdc0371c375676a97967547f4065607d4c53fd1.zip
  # renovate: datasource=github-tags depName=XPowersLib packageName=lewisxhe/XPowersLib
-  https://github.com/lewisxhe/XPowersLib/archive/v0.3.2.zip
+  https://github.com/lewisxhe/XPowersLib/archive/v0.3.3.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0
--- a/variants/esp32/m5stack_core/platformio.ini
+++ b/variants/esp32/m5stack_core/platformio.ini
@@ -36,4 +36,4 @@ lib_ignore =
 lib_deps = 
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
--- a/variants/esp32/m5stack_coreink/platformio.ini
+++ b/variants/esp32/m5stack_coreink/platformio.ini
@@ -19,9 +19,9 @@ build_flags =
 lib_deps = 
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
--- a/variants/esp32/tbeam/platformio.ini
+++ b/variants/esp32/tbeam/platformio.ini
@@ -32,4 +32,4 @@ lib_deps =
  # renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
  https://github.com/meshtastic/st7796/archive/1.0.5.zip
  # renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
--- a/variants/esp32/wiphone/platformio.ini
+++ b/variants/esp32/wiphone/platformio.ini
@@ -11,7 +11,7 @@ build_flags =
 lib_deps = 
  ${esp32_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=custom.pio depName=SX1509 IO Expander packageName=sparkfun/library/SX1509 IO Expander
  sparkfun/SX1509 IO Expander@3.0.6
  # renovate: datasource=custom.pio depName=APA102 packageName=pololu/library/APA102
--- a/variants/esp32c6/esp32c6.ini
+++ b/variants/esp32c6/esp32c6.ini
@@ -28,7 +28,7 @@ lib_deps =
  ${environmental_extra.lib_deps}
  ${radiolib_base.lib_deps}
  # renovate: datasource=custom.pio depName=XPowersLib packageName=lewisxhe/library/XPowersLib
-  lewisxhe/XPowersLib@0.3.2
+  lewisxhe/XPowersLib@0.3.3
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
--- a/variants/esp32c6/m5stack_unitc6l/variant.h
+++ b/variants/esp32c6/m5stack_unitc6l/variant.h
@@ -50,3 +50,5 @@ void c6l_init();
 #endif
 #define SCREEN_TRANSITION_FRAMERATE 10
 #define BRIGHTNESS_DEFAULT 130 // Medium Low Brightness
+
+#define SERIAL_PRINT_PORT 1
--- a/variants/esp32c6/tlora_c6/variant.h
+++ b/variants/esp32c6/tlora_c6/variant.h
@@ -19,3 +19,5 @@
 #define SX126X_TXEN 14
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+#define SERIAL_PRINT_PORT 1
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/platformio.ini
@@ -11,6 +11,10 @@ custom_meshtastic_requires_dfu = false

 extends = esp32s3_base
 board = ESP32-S3-WROOM-1-N4
+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/ELECROW-ThinkNode-M5>
+
 build_flags =
  ${esp32s3_base.build_flags}
  -D ELECROW_ThinkNode_M5
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.cpp
@@ -0,0 +1,12 @@
+#include "variant.h"
+#include <PCA9557.h>
+
+PCA9557 io(0x18, &Wire);
+
+void earlyInitVariant()
+{
+    Wire.begin(48, 47);
+    io.pinMode(PCA_PIN_EINK_EN, OUTPUT);
+    io.pinMode(PCA_PIN_POWER_EN, OUTPUT);
+    io.digitalWrite(PCA_PIN_POWER_EN, HIGH);
+}
--- a/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
+++ b/variants/esp32s3/ELECROW-ThinkNode-M5/variant.h
@@ -4,6 +4,8 @@
 #define UART_TX 43
 #define UART_RX 44

+#define HAS_PCA9557
+
 // LED
 // Both of these are on the GPIO expander
 #define PCA_LED_USER 1  // the Blue LED
@@ -79,4 +81,6 @@

 #define BUTTON_PIN PIN_BUTTON1
 #define BUTTON_PIN_ALT PIN_BUTTON2
+
+#define SERIAL_PRINT_PORT 0
 #endif
--- a/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/esp32s3/diy/my_esp32s3_diy_eink/platformio.ini
@@ -11,7 +11,7 @@ upload_speed = 921600
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
 build_unflags =
--- a/variants/esp32s3/esp32-s3-pico/platformio.ini
+++ b/variants/esp32s3/esp32-s3-pico/platformio.ini
@@ -23,6 +23,6 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
  adafruit/Adafruit NeoPixel@1.15.2
--- a/variants/esp32s3/hackaday-communicator/platformio.ini
+++ b/variants/esp32s3/hackaday-communicator/platformio.ini
@@ -6,6 +6,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/hackaday-communicator>
+
 build_flags = ${esp32s3_base.build_flags} 
  -D HACKADAY_COMMUNICATOR
  -D BOARD_HAS_PSRAM
@@ -13,4 +17,4 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=git-refs depName=meshtastic-Arduino_GFX packageName=https://github.com/meshtastic/Arduino_GFX gitBranch=master
-  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
+  https://github.com/meshtastic/Arduino_GFX/archive/054e81ffaf23784830a734e3c184346789349406.zip
--- a/variants/esp32s3/hackaday-communicator/variant.cpp
+++ b/variants/esp32s3/hackaday-communicator/variant.cpp
@@ -0,0 +1,6 @@
+#include "variant.h"
+#include "Arduino.h"
+void earlyInitVariant()
+{
+    pinMode(KB_INT, INPUT);
+}
--- a/variants/esp32s3/heltec_v4/platformio.ini
+++ b/variants/esp32s3/heltec_v4/platformio.ini
@@ -126,7 +126,7 @@ build_flags =
 lib_deps = ${heltec_v4_base.lib_deps}
  ; ${device-ui_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=git-refs depName=Quency-D_chsc6x packageName=https://github.com/Quency-D/chsc6x gitBranch=master
  https://github.com/Quency-D/chsc6x/archive/5cbead829d6b432a8d621ed1aafd4eb474fd4f27.zip
  ; TODO revert to official device-ui (when merged)
--- a/variants/esp32s3/heltec_wireless_tracker/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker/platformio.ini
@@ -24,4 +24,4 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
--- a/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_V1_0/platformio.ini
@@ -22,4 +22,4 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
--- a/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
+++ b/variants/esp32s3/heltec_wireless_tracker_v2/platformio.ini
@@ -1,8 +1,17 @@
 [env:heltec-wireless-tracker-v2]
+custom_meshtastic_support_level = 1
+custom_meshtastic_images = heltec_wireless_tracker_v2.svg
+custom_meshtastic_tags = Heltec
+
 extends = esp32s3_base
 board = heltec_wireless_tracker_v2
 board_build.partitions = default_8MB.csv
 upload_protocol = esptool
+custom_meshtastic_hw_model = 113
+custom_meshtastic_hw_model_slug = HELTEC_WIRELESS_TRACKER_V2
+custom_meshtastic_architecture = esp32s3
+custom_meshtastic_display_name = Heltec Wireless Tracker V2
+custom_meshtastic_actively_supported = true

 build_flags = 
  ${esp32s3_base.build_flags}
@@ -11,4 +20,4 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
--- a/variants/esp32s3/mesh-tab/platformio.ini
+++ b/variants/esp32s3/mesh-tab/platformio.ini
@@ -51,7 +51,7 @@ lib_deps =
  ${esp32s3_base.lib_deps}
  ${device-ui_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

 [mesh_tab_xpt2046]
 extends = mesh_tab_base
--- a/variants/esp32s3/picomputer-s3/platformio.ini
+++ b/variants/esp32s3/picomputer-s3/platformio.ini
@@ -24,7 +24,7 @@ build_flags =
 lib_deps = 
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

 build_src_filter =
  ${esp32s3_base.build_src_filter}
--- a/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
+++ b/variants/esp32s3/rak_wismesh_tap_v2/platformio.ini
@@ -16,7 +16,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

 [ft5x06]
 extends = mesh_tab_base
--- a/variants/esp32s3/t-deck-pro/platformio.ini
+++ b/variants/esp32s3/t-deck-pro/platformio.ini
@@ -15,6 +15,10 @@ board = t-deck-pro
 board_check = true
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck-pro>
+
 build_flags = 
  ${esp32s3_base.build_flags} -I variants/esp32s3/t-deck-pro
  -D T_DECK_PRO
@@ -29,7 +33,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=git-refs depName=CSE_Touch packageName=https://github.com/CIRCUITSTATE/CSE_Touch gitBranch=main
  https://github.com/CIRCUITSTATE/CSE_Touch/archive/b44f23b6f870b848f1fbe453c190879bc6cfaafa.zip
  # renovate: datasource=github-tags depName=CSE_CST328 packageName=CIRCUITSTATE/CSE_CST328
--- a/variants/esp32s3/t-deck-pro/variant.cpp
+++ b/variants/esp32s3/t-deck-pro/variant.cpp
@@ -0,0 +1,14 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    pinMode(LORA_EN, OUTPUT);
+    digitalWrite(LORA_EN, HIGH);
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(PIN_EINK_CS, OUTPUT);
+    digitalWrite(PIN_EINK_CS, HIGH);
+}
--- a/variants/esp32s3/t-deck/platformio.ini
+++ b/variants/esp32s3/t-deck/platformio.ini
@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/t-deck>
+
 build_flags = ${esp32s3_base.build_flags} 
  -D T_DECK 
  -D BOARD_HAS_PSRAM
@@ -24,7 +28,7 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
  earlephilhower/ESP8266Audio@1.9.9
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
--- a/variants/esp32s3/t-deck/variant.cpp
+++ b/variants/esp32s3/t-deck/variant.cpp
@@ -0,0 +1,23 @@
+#include "variant.h"
+#include "Arduino.h"
+
+void earlyInitVariant()
+{
+    // GPIO10 manages all peripheral power supplies
+    // Turn on peripheral power immediately after MUC starts.
+    // If some boards are turned on late, ESP32 will reset due to low voltage.
+    // ESP32-C3(Keyboard) , MAX98357A(Audio Power Amplifier) ,
+    // TF Card , Display backlight(AW9364DNR) , AN48841B(Trackball) , ES7210(Decoder)
+    pinMode(KB_POWERON, OUTPUT);
+    digitalWrite(KB_POWERON, HIGH);
+    // T-Deck has all three SPI peripherals (TFT, SD, LoRa) attached to the same SPI bus
+    // We need to initialize all CS pins in advance otherwise there will be SPI communication issues
+    // e.g. when detecting the SD card
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    delay(100);
+}
--- a/variants/esp32s3/t-deck/variant.h
+++ b/variants/esp32s3/t-deck/variant.h
@@ -71,6 +71,7 @@
 #define TB_RIGHT 2
 #define TB_PRESS 0 // BUTTON_PIN
 #define TB_DIRECTION FALLING
+#define TB_THRESHOLD 3

 // microphone
 #define ES7210_SCK 47
--- a/variants/esp32s3/t-watch-s3/platformio.ini
+++ b/variants/esp32s3/t-watch-s3/platformio.ini
@@ -22,9 +22,9 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
  # renovate: datasource=custom.pio depName=Adafruit DRV2605 packageName=adafruit/library/Adafruit DRV2605 Library
  adafruit/Adafruit DRV2605 Library@1.2.4
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
--- a/variants/esp32s3/tbeam-s3-core/platformio.ini
+++ b/variants/esp32s3/tbeam-s3-core/platformio.ini
@@ -19,7 +19,7 @@ board_check = true
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4

 build_flags = 
  ${esp32s3_base.build_flags} 
--- a/variants/esp32s3/tlora-pager/platformio.ini
+++ b/variants/esp32s3/tlora-pager/platformio.ini
@@ -17,6 +17,10 @@ board_check = true
 board_build.partitions = default_16MB.csv
 upload_protocol = esptool

+build_src_filter =
+  ${esp32s3_base.build_src_filter}
+  +<../variants/esp32s3/tlora-pager>
+
 build_flags = ${esp32s3_base.build_flags} 
  -I variants/esp32s3/tlora-pager
  -D T_LORA_PAGER 
@@ -29,7 +33,7 @@ build_flags = ${esp32s3_base.build_flags}

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=custom.pio depName=ESP8266Audio packageName=earlephilhower/library/ESP8266Audio
  earlephilhower/ESP8266Audio@1.9.9
  # renovate: datasource=custom.pio depName=ESP8266SAM packageName=earlephilhower/library/ESP8266SAM
@@ -39,7 +43,7 @@ lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=PCF8563 packageName=lewisxhe/library/PCF8563_Library
  lewisxhe/PCF8563_Library@1.0.1
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
  # renovate: datasource=github-tags depName=pschatzmann_arduino-audio-driver packageName=pschatzmann/arduino-audio-driver
  https://github.com/pschatzmann/arduino-audio-driver/archive/v0.2.0.zip
  # TODO renovate
--- a/variants/esp32s3/tlora-pager/variant.cpp
+++ b/variants/esp32s3/tlora-pager/variant.cpp
@@ -0,0 +1,31 @@
+#include "variant.h"
+#include "ExtensionIOXL9555.hpp"
+extern ExtensionIOXL9555 io;
+
+void earlyInitVariant()
+{
+    pinMode(LORA_CS, OUTPUT);
+    digitalWrite(LORA_CS, HIGH);
+    pinMode(SDCARD_CS, OUTPUT);
+    digitalWrite(SDCARD_CS, HIGH);
+    pinMode(TFT_CS, OUTPUT);
+    digitalWrite(TFT_CS, HIGH);
+    pinMode(KB_INT, INPUT_PULLUP);
+    // io expander
+    io.begin(Wire, XL9555_SLAVE_ADDRESS0, SDA, SCL);
+    io.pinMode(EXPANDS_DRV_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_DRV_EN, HIGH);
+    io.pinMode(EXPANDS_AMP_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_AMP_EN, LOW);
+    io.pinMode(EXPANDS_LORA_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_LORA_EN, HIGH);
+    io.pinMode(EXPANDS_GPS_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPS_EN, HIGH);
+    io.pinMode(EXPANDS_KB_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_KB_EN, HIGH);
+    io.pinMode(EXPANDS_SD_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_SD_EN, HIGH);
+    io.pinMode(EXPANDS_GPIO_EN, OUTPUT);
+    io.digitalWrite(EXPANDS_GPIO_EN, HIGH);
+    io.pinMode(EXPANDS_SD_PULLEN, INPUT);
+}
--- a/variants/esp32s3/tracksenger/platformio.ini
+++ b/variants/esp32s3/tracksenger/platformio.ini
@@ -22,7 +22,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

 [env:tracksenger-lcd]
 custom_meshtastic_hw_model = 48
@@ -48,7 +48,7 @@ build_flags =
 lib_deps =
  ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19

 [env:tracksenger-oled]
 custom_meshtastic_hw_model = 48
--- a/variants/esp32s3/unphone/platformio.ini
+++ b/variants/esp32s3/unphone/platformio.ini
@@ -37,7 +37,7 @@ build_src_filter =

 lib_deps = ${esp32s3_base.lib_deps}
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.0
+  lovyan03/LovyanGFX@1.2.19
  # TODO renovate
  https://gitlab.com/hamishcunningham/unphonelibrary#meshtastic@9.0.0
  # renovate: datasource=custom.pio depName=NeoPixel packageName=adafruit/library/Adafruit NeoPixel
--- a/variants/native/portduino.ini
+++ b/variants/native/portduino.ini
@@ -27,9 +27,9 @@ lib_deps =
  # renovate: datasource=custom.pio depName=rweather/Crypto packageName=rweather/library/Crypto
  rweather/Crypto@0.4.0
  # renovate: datasource=custom.pio depName=LovyanGFX packageName=lovyan03/library/LovyanGFX
-  lovyan03/LovyanGFX@1.2.7
+  lovyan03/LovyanGFX@1.2.19
  # renovate: datasource=git-refs depName=libch341-spi-userspace packageName=https://github.com/pine64/libch341-spi-userspace gitBranch=main
-  https://github.com/pine64/libch341-spi-userspace/archive/af9bc27c9c30fa90772279925b7c5913dff789b4.zip
+  https://github.com/pine64/libch341-spi-userspace/archive/23c42319a69cffcb65868e3c72e6bed83974a393.zip
  # renovate: datasource=custom.pio depName=adafruit/Adafruit seesaw Library packageName=adafruit/library/Adafruit seesaw Library
 	adafruit/Adafruit seesaw Library@1.7.9
  # renovate: datasource=git-refs depName=RAK12034-BMX160 packageName=https://github.com/RAKWireless/RAK12034-BMX160 gitBranch=main
--- a/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/nrf52840/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -12,5 +12,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/Dongle_
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp
+++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.cpp
@@ -42,3 +42,28 @@ void initVariant()
    pinMode(PIN_LED3, OUTPUT);
    ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == SX126X_BUSY || pin == PIN_SPI_SCK || pin == SX126X_DIO1 || pin == PIN_SPI_MOSI || pin == PIN_SPI_MISO ||
+            pin == SX126X_CS || pin == SX126X_RESET || pin == PIN_NFC1 || pin == PIN_NFC2 || pin == PIN_BUTTON1 ||
+            pin == PIN_BUTTON2) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+    nrf_gpio_cfg_input(PIN_BUTTON1, NRF_GPIO_PIN_PULLUP); // Configure the pin to be woken up as an input
+    nrf_gpio_pin_sense_t sense = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(PIN_BUTTON1, sense);
+
+    nrf_gpio_cfg_input(PIN_BUTTON2, NRF_GPIO_PIN_PULLUP);
+    nrf_gpio_pin_sense_t sense1 = NRF_GPIO_PIN_SENSE_LOW;
+    nrf_gpio_cfg_sense_set(PIN_BUTTON2, sense1);
+}
--- a/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M1/variant.h
@@ -159,6 +159,8 @@ External serial flash WP25R1635FZUIL0
 #define PIN_SERIAL1_TX GPS_TX_PIN
 #define PIN_SERIAL1_RX GPS_RX_PIN

+#define SERIAL_PRINT_PORT 0
+
 /*
 * SPI Interfaces
 */
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/platformio.ini
@@ -25,4 +25,4 @@ lib_deps =
  # renovate: datasource=custom.pio depName=nRF52_PWM packageName=khoih-prog/library/nRF52_PWM
  khoih-prog/nRF52_PWM@1.0.1
  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M3/variant.h
@@ -113,6 +113,8 @@ extern "C" {
 #define LR11X0_DIO3_TCXO_VOLTAGE 3.3
 #define LR11X0_DIO_AS_RF_SWITCH

+#define SERIAL_PRINT_PORT 0
+
 // PCF8563 RTC Module
 // REVISIT https://github.com/meshtastic/firmware/pull/9084
 // #define PCF8563_RTC 0x51
--- a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp
+++ b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.cpp
@@ -49,3 +49,21 @@ void initVariant()
    pinMode(Battery_LED_4, OUTPUT);
    ledOff(Battery_LED_4);
 }
+
+/// called from main-nrf52.cpp during the cpuDeepSleep() function
+void variant_shutdown()
+{
+    for (int pin = 0; pin < 48; pin++) {
+        if (pin == PIN_GPS_EN || pin == PIN_BUTTON1) {
+            continue;
+        }
+        pinMode(pin, OUTPUT);
+        digitalWrite(pin, LOW);
+        if (pin >= 32) {
+            NRF_P1->DIRCLR = (1 << (pin - 32));
+        } else {
+            NRF_GPIO->DIRCLR = (1 << pin);
+        }
+    }
+    digitalWrite(PIN_GPS_EN, HIGH);
+}
--- a/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h
+++ b/variants/nrf52840/ELECROW-ThinkNode-M4/variant.h
@@ -135,6 +135,8 @@ static const uint8_t A0 = PIN_A0;
 #define PIN_SERIAL1_RX GPS_RX_PIN
 #define PIN_SERIAL1_TX GPS_TX_PIN

+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif
--- a/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
+++ b/variants/nrf52840/ELECROW-ThinkNode-M6/platformio.ini
@@ -22,4 +22,4 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ELECROW
 lib_deps =
  ${nrf52840_base.lib_deps}
  ; # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  ; lewisxhe/SensorLib@0.3.3
+  ; lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/nrf52840/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -16,7 +16,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/ME25LS0
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
 ;upload_port = /dev/ttyACM1
--- a/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/nrf52840/MakePython_nRF52840_eink/platformio.ini
@@ -15,6 +15,6 @@ lib_deps =
  # renovate: datasource=git-refs depName=meshtastic-ESP32_Codec2 packageName=https://github.com/meshtastic/ESP32_Codec2 gitBranch=master
  https://github.com/meshtastic/ESP32_Codec2/archive/633326c78ac251c059ab3a8c430fcdf25b41672f.zip
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
 ;upload_port = /dev/ttyACM4
--- a/variants/nrf52840/TWC_mesh_v4/platformio.ini
+++ b/variants/nrf52840/TWC_mesh_v4/platformio.ini
@@ -9,5 +9,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/TWC_mes
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
 debug_tool = jlink
--- a/variants/nrf52840/canaryone/variant.h
+++ b/variants/nrf52840/canaryone/variant.h
@@ -170,6 +170,8 @@ static const uint8_t A0 = PIN_A0;
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (2.0F)

+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.cpp
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/variant.cpp
@@ -36,3 +36,10 @@ void initVariant()
    pinMode(PIN_3V3_EN, OUTPUT);
    digitalWrite(PIN_3V3_EN, HIGH);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_input(BUTTON_PIN, NRF_GPIO_PIN_PULLUP); // Enable internal pull-up on the button pin
+    nrf_gpio_pin_sense_t sense = NRF_GPIO_PIN_SENSE_LOW; // Configure SENSE signal on low edge
+    nrf_gpio_cfg_sense_set(BUTTON_PIN, sense);           // Apply SENSE to wake up the device from the deep sleep
+}
--- a/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_node_t114-inkhud/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
    pinMode(PIN_LED1, OUTPUT);
    ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/heltec_mesh_node_t114/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_node_t114/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -36,3 +37,10 @@ void initVariant()
    pinMode(PIN_LED1, OUTPUT);
    ledOff(PIN_LED1);
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/heltec_mesh_node_t114/variant.h
+++ b/variants/nrf52840/heltec_mesh_node_t114/variant.h
@@ -156,7 +156,7 @@ No longer populated on PCB

 // The bluetooth transmit power on the nRF52840 is adjustable from -20dB to +8dB in steps of 4dB
 // so NRF52_BLE_TX_POWER can be set to -20, -16, -12, -8, -4, 0 (default), 4, and 8.
-//#define NRF52_BLE_TX_POWER 8
+// #define NRF52_BLE_TX_POWER 8

 /*
 * GPS pins
--- a/variants/nrf52840/heltec_mesh_solar/variant.cpp
+++ b/variants/nrf52840/heltec_mesh_solar/variant.cpp
@@ -19,6 +19,7 @@
 */

 #include "variant.h"
+#include "Arduino.h"
 #include "nrf.h"
 #include "wiring_constants.h"
 #include "wiring_digital.h"
@@ -38,3 +39,10 @@ void initVariant()
    digitalWrite(PIN_SCREEN_VDD_CTL, LOW); // Start with power on
 #endif
 }
+
+void variant_shutdown()
+{
+    nrf_gpio_cfg_default(PIN_GPS_PPS);
+    detachInterrupt(PIN_GPS_PPS);
+    detachInterrupt(PIN_BUTTON1);
+}
--- a/variants/nrf52840/heltec_mesh_solar/variant.h
+++ b/variants/nrf52840/heltec_mesh_solar/variant.h
@@ -142,6 +142,8 @@ No longer populated on PCB
 #define BQ4050_SCL_PIN (32 + 0)                // I2C clock line pin
 #define BQ4050_EMERGENCY_SHUTDOWN_PIN (32 + 3) // Emergency shutdown pin

+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif
--- a/variants/nrf52840/meshlink/variant.cpp
+++ b/variants/nrf52840/meshlink/variant.cpp
@@ -20,4 +20,11 @@ void initVariant()
    pinMode(PIN_WD_EN, OUTPUT);
    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
 #endif
+}
+
+void variant_shutdown()
+{
+#ifdef PIN_WD_EN
+    digitalWrite(PIN_WD_EN, LOW);
+#endif
 }
--- a/variants/nrf52840/meshlink/variant.h
+++ b/variants/nrf52840/meshlink/variant.h
@@ -54,6 +54,7 @@ extern "C" {
 */
 #define PIN_SERIAL1_RX (32 + 8)
 #define PIN_SERIAL1_TX (7)
+#define SERIAL_PRINT_PORT 0

 /*
 * SPI Interfaces
--- a/variants/nrf52840/muzi_base/variant.h
+++ b/variants/nrf52840/muzi_base/variant.h
@@ -176,6 +176,8 @@ extern "C" {
 #define EXTERNAL_FLASH_DEVICES W25Q32JVSS
 #define EXTERNAL_FLASH_USE_QSPI

+#define SERIAL_PRINT_PORT 0
+
 // NFC is disabled via CONFIG_NFCT_PINS_AS_GPIOS=1 build flag
 // This configures P0.09 and P0.10 as regular GPIO pins instead of NFC pins

--- a/variants/nrf52840/nano-g2-ultra/platformio.ini
+++ b/variants/nrf52840/nano-g2-ultra/platformio.ini
@@ -20,5 +20,5 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/nano-g2
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs
--- a/variants/nrf52840/r1-neo/variant.cpp
+++ b/variants/nrf52840/r1-neo/variant.cpp
@@ -43,3 +43,11 @@ void initVariant()
    // pinMode(PIN_3V3_EN, OUTPUT);
    // digitalWrite(PIN_3V3_EN, HIGH);
 }
+
+void earlyInitVariant()
+{
+    pinMode(DCDC_EN_HOLD, OUTPUT);
+    digitalWrite(DCDC_EN_HOLD, HIGH);
+    pinMode(NRF_ON, OUTPUT);
+    digitalWrite(NRF_ON, HIGH);
+}
--- a/variants/nrf52840/rak4631_epaper/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper/platformio.ini
@@ -15,7 +15,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
--- a/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
+++ b/variants/nrf52840/rak4631_epaper_onrxtx/platformio.ini
@@ -17,7 +17,7 @@ build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/rak4631
 lib_deps = 
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=GxEPD2 packageName=zinggjm/library/GxEPD2
-  zinggjm/GxEPD2@1.6.5
+  zinggjm/GxEPD2@1.6.6
  # renovate: datasource=custom.pio depName=Melopero RV3028 packageName=melopero/library/Melopero RV3028
  melopero/Melopero RV3028@1.2.0
  # renovate: datasource=custom.pio depName=RAK NCP5623 RGB LED packageName=rakwireless/library/RAKwireless NCP5623 RGB LED library
--- a/variants/nrf52840/rak_wismeshtap/variant.cpp
+++ b/variants/nrf52840/rak_wismeshtap/variant.cpp
@@ -42,4 +42,21 @@ void initVariant()
    // 3V3 Power Rail
    pinMode(PIN_3V3_EN, OUTPUT);
    digitalWrite(PIN_3V3_EN, HIGH);
+}
+
+void variant_shutdown()
+{
+    // GPIO restores input status, otherwise there will be leakage current
+    nrf_gpio_cfg_default(TFT_BL);
+    nrf_gpio_cfg_default(TFT_DC);
+    nrf_gpio_cfg_default(TFT_CS);
+    nrf_gpio_cfg_default(TFT_SCLK);
+    nrf_gpio_cfg_default(TFT_MOSI);
+    nrf_gpio_cfg_default(TFT_MISO);
+    nrf_gpio_cfg_default(SCREEN_TOUCH_INT);
+    nrf_gpio_cfg_default(WB_I2C1_SCL);
+    nrf_gpio_cfg_default(WB_I2C1_SDA);
+
+    // nrf_gpio_cfg_default(WB_I2C2_SCL);
+    // nrf_gpio_cfg_default(WB_I2C2_SDA);
 }
--- a/variants/nrf52840/t-echo-lite/variant.h
+++ b/variants/nrf52840/t-echo-lite/variant.h
@@ -171,6 +171,8 @@ static const uint8_t A0 = PIN_A0;
 #define VBAT_AR_INTERNAL AR_INTERNAL_3_0
 #define ADC_MULTIPLIER (2.0F)

+#define SERIAL_PRINT_PORT 0
+
 // #define NO_EXT_GPIO 1
 // PINs back side
 // Batt & solar connector left up corner
--- a/variants/nrf52840/t-echo-plus/variant.h
+++ b/variants/nrf52840/t-echo-plus/variant.h
@@ -138,6 +138,8 @@ static const uint8_t A0 = PIN_A0;
 // Battery / ADC already defined above
 #define HAS_RTC 1

+#define SERIAL_PRINT_PORT 0
+
 #ifdef __cplusplus
 }
 #endif
--- a/variants/nrf52840/t-echo/platformio.ini
+++ b/variants/nrf52840/t-echo/platformio.ini
@@ -32,7 +32,7 @@ lib_deps =
  # renovate: datasource=git-refs depName=meshtastic-GxEPD2 packageName=https://github.com/meshtastic/GxEPD2 gitBranch=master
  https://github.com/meshtastic/GxEPD2/archive/a05c11c02862624266b61599b0d6ba93e33c6f24.zip
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
 ;upload_protocol = fs

 [env:t-echo-inkhud]
@@ -53,4 +53,4 @@ lib_deps =
  ${inkhud.lib_deps} ; InkHUD libs first, so we get GFXRoot instead of AdafruitGFX
  ${nrf52840_base.lib_deps}
  # renovate: datasource=custom.pio depName=SensorLib packageName=lewisxhe/library/SensorLib
-  lewisxhe/SensorLib@0.3.3
+  lewisxhe/SensorLib@0.3.4
--- a/variants/nrf52840/t-echo/variant.cpp
+++ b/variants/nrf52840/t-echo/variant.cpp
@@ -42,3 +42,13 @@ void initVariant()
    pinMode(PIN_LED3, OUTPUT);
    ledOff(PIN_LED3);
 }
+
+void variant_shutdown()
+{
+    // To power off the T-Echo, the display must be set
+    // as an input pin; otherwise, there will be leakage current.
+    pinMode(PIN_EINK_CS, INPUT);
+    pinMode(PIN_EINK_DC, INPUT);
+    pinMode(PIN_EINK_RES, INPUT);
+    pinMode(PIN_EINK_BUSY, INPUT);
+}
--- a/variants/nrf52840/t-echo/variant.h
+++ b/variants/nrf52840/t-echo/variant.h
@@ -88,6 +88,7 @@ static const uint8_t A0 = PIN_A0;
 /*
 * Serial interfaces
 */
+#define SERIAL_PRINT_PORT 0

 /*
 No longer populated on PCB
--- a/variants/stm32/CDEBYTE_E77-MBL/variant.h
+++ b/variants/stm32/CDEBYTE_E77-MBL/variant.h
@@ -19,5 +19,7 @@ Do not expect a working Meshtastic device with this target.
 // #define LED_PIN PB3 // LED2
 #define LED_STATE_ON 1

+#define SERIAL_PRINT_PORT 1
+
 #define EBYTE_E77_MBL
 #endif
--- a/variants/stm32/rak3172/variant.h
+++ b/variants/stm32/rak3172/variant.h
@@ -17,5 +17,6 @@ Do not expect a working Meshtastic device with this target.
 #define LED_STATE_ON 1

 #define RAK3172
+#define SERIAL_PRINT_PORT 1

 #endif