Merge branch 'master' into nomad-gemini

variants/diy/platformio.ini

@@ -2,6 +2,7 @@
 [env:meshtastic-diy-v1]
 extends = esp32_base
 board = esp32doit-devkit-v1
+board_level = extra
 board_check = true
 build_flags =
   ${esp32_base.build_flags}

variants/dreamcatcher/platformio.ini

@@ -11,7 +11,7 @@ build_flags =
   -DARDUINO_USB_CDC_ON_BOOT=1
 
 lib_deps = ${esp32s3_base.lib_deps}
-  earlephilhower/ESP8266Audio@^1.9.7
+  earlephilhower/ESP8266Audio@^1.9.9
   earlephilhower/ESP8266SAM@^1.0.1
 
 [env:dreamcatcher-2206] 

variants/dreamcatcher/variant.h

@@ -60,6 +60,7 @@
 #define DAC_I2S_BCK 21
 #define DAC_I2S_WS 9
 #define DAC_I2S_DOUT 48
+#define DAC_I2S_MCLK 44
 
 #define BIAS_T_ENABLE 7 // needs to be low
 #define BIAS_T_VALUE 0

variants/radiomaster_900_bandit/platformio.ini

@@ -6,9 +6,11 @@ build_flags =
   -DRADIOMASTER_900_BANDIT
   -DVTABLES_IN_FLASH=1
   -DCONFIG_DISABLE_HAL_LOCKS=1
+  -DHAS_STK8XXX=1
   -O2
   -Ivariants/radiomaster_900_bandit
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
 lib_deps =
-  ${esp32_base.lib_deps}
+  ${esp32_base.lib_deps}
+  https://github.com/gjelsoe/STK8xxx-Accelerometer.git#v0.1.1

variants/rak_wismeshtap/variant.h

@@ -306,7 +306,7 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
 #define SCREEN_TOUCH_INT WB_IO6
 
 #define CANNED_MESSAGE_MODULE_ENABLE 1
-
+#define USE_VIRTUAL_KEYBOARD 1
 /*----------------------------------------------------------------------------
  *        Arduino objects - C++ only
  *----------------------------------------------------------------------------*/

variants/seeed-sensecap-indicator/variant.h

@@ -36,12 +36,13 @@
 #define TOUCH_I2C_PORT 0
 #define TOUCH_SLAVE_ADDRESS 0x48
 
-// Buzzer
-#define PIN_BUZZER 19
+// in future, we may want to add a buzzer and add all sensors to the indicator via a data protocol for now only GPS is supported
+// // Buzzer
+// #define PIN_BUZZER 19
 
-#define HAS_GPS 0
-#undef GPS_RX_PIN
-#undef GPS_TX_PIN
+#define GPS_RX_PIN 20
+#define GPS_TX_PIN 19
+#define HAS_GPS 1
 
 #define USE_SX1262
 #define USE_SX1268
@@ -62,3 +63,6 @@
 #define SX126X_BUSY LORA_DIO2
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1

variants/t-deck/platformio.ini

@@ -15,5 +15,5 @@ build_flags = ${esp32_base.build_flags}
 
 lib_deps = ${esp32s3_base.lib_deps}
 	lovyan03/LovyanGFX@^1.1.9
-  earlephilhower/ESP8266Audio@^1.9.7
+  earlephilhower/ESP8266Audio@^1.9.9
   earlephilhower/ESP8266SAM@^1.0.1

variants/t-deck/variant.h

@@ -73,6 +73,7 @@
 #define DAC_I2S_BCK 7
 #define DAC_I2S_WS 5
 #define DAC_I2S_DOUT 6
+#define DAC_I2S_MCLK 21 // GPIO lrck mic
 
 // LoRa
 #define USE_SX1262

variants/t-watch-s3/platformio.ini

@@ -9,10 +9,12 @@ build_flags = ${esp32_base.build_flags}
   -DT_WATCH_S3
   -Ivariants/t-watch-s3
   -DPCF8563_RTC=0x51
+  -DHAS_BMA423=1
 
 lib_deps = ${esp32s3_base.lib_deps}
 	lovyan03/LovyanGFX@^1.1.9
   lewisxhe/PCF8563_Library@1.0.1
   adafruit/Adafruit DRV2605 Library@^1.2.2
-  earlephilhower/ESP8266Audio@^1.9.7
-  earlephilhower/ESP8266SAM@^1.0.1
+  earlephilhower/ESP8266Audio@^1.9.9
+  earlephilhower/ESP8266SAM@^1.0.1
+  lewisxhe/SensorLib@0.2.0

variants/t-watch-s3/variant.h

@@ -34,6 +34,7 @@
 #define DAC_I2S_BCK 48
 #define DAC_I2S_WS 15
 #define DAC_I2S_DOUT 46
+#define DAC_I2S_MCLK 0
 
 #define HAS_AXP2101
 
@@ -71,3 +72,6 @@
 #define SX126X_DIO3_TCXO_VOLTAGE 1.8
 // Internally the TTGO module hooks the SX1262-DIO2 in to control the TX/RX switch (which is the default for
 // the sx1262interface code)
+
+#define USE_VIRTUAL_KEYBOARD 1
+#define DISPLAY_CLOCK_FRAME 1