rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-03 08:30:45 +00:00
Code Issues Packages Projects Releases Wiki Activity

Add rak12035 VB Soil Monitor Tested & Working (#6741)

Browse Source 
* [WIP] Add RAK12035VB Soil Moisture Sensor support

Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.

This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.

Co-Authored-By: @Justin-Mann

* [WIP] Add RAK12035VB Soil Moisture Sensor support

Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.

This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.

Co-Authored-By: @Justin-Mann

* [WIP] Add RAK12035VB Soil Moisture Sensor support

Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.

This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.

Co-Authored-By: @Justin-Mann

* [WIP] Add RAK12035VB Soil Moisture Sensor support

Introduce the RAK12035 sensor as an environmental telemetry sensor,
including necessary calibration checks and default values. Update
relevant files to integrate the sensor into the existing telemetry system.

This hardware is not just one module, but a couple.. RAK12023 and
RAK12035 is the component stack, the RAK12023 does not seem to matter
much and allows for multiple RAK12035 devices to be used.

Co-Authored-By: @Justin-Mann

* Update to 1.0.4 release of RAK12035_SoilMoisture

* cleanup

* cool

* .

* ..

* little bit of cleanup and recompile/upload/test on RAK WISBLAOCK STACK: RAK19007/RAK4631/RAK12035VB/RAK12500

looks like soil monitor is working correctly, new environmental metrics are comming thru [new protos soil_moisture, soil_temperature] and GPS is working again with the RAK 12500.

improvements could be made around the configuration of the monitor.

next steps include updating the client(s) to react to, log and display the new proto metrics for soil temp and humidity.

* . comments about current limitations and TODOs

* trunk update

* trying to autoformat..

* fix formatting attempt 2

* ..

* ...

* ...

* .

* some corrections and local build success

* correction in temp code

* grr formatting

* cleanup after a few experiments

* remove temp code to overwrite values for temp and humidity protos.. next step just update the clients to know about soil_temperature and soil_humidity protos.

* update some values in varient for rak wistap

* working out trunk formatting..

* wip
. corrections to other build variants

* .

* protobuffs?

* protobufs?

* Update protobufs ref

* Protobufs ref

* Trunk

* Update RAK12035Sensor.cpp

* Fmt

* comment changes

* dumb mistakes... resolved, actually built and tested.. all good..

* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* Update src/modules/Telemetry/Sensor/RAK12035Sensor.cpp

Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>

* . proto submod

* proto

* proto

* merge master

* mabe a fix for GPS pin conflict, waiting on a new gps module to try

* merge master, attempt to fix gps (RAK12500) pin conflict with RAK12023/12035

* .

* .

---------

Co-authored-by: Tom Fifield <tom@tomfifield.net>
Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com>
Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com>
This commit is contained in:
Justin E. Mann
2025-06-19 17:51:03 -06:00
committed by GitHub
parent 8be76a56c7
commit 2fb46ce5d5
17 changed files with 235 additions and 17 deletions
Download Patch File Download Diff File Expand all files Collapse all files

14
variants/rak_wismeshtap/variant.h
View File

@@ -90,6 +90,8 @@ static const uint8_t A7 = PIN_A7;
// Other pins
#define PIN_AREF (2)
#define PIN_NFC1 (9)
#define WB_IO5 PIN_NFC1
#define WB_IO4 (4)
#define PIN_NFC2 (10)
static const uint8_t AREF = PIN_AREF;
@@ -176,11 +178,11 @@ static const uint8_t SCK = PIN_SPI_SCK;
// No reason not to have the RAK Wireless pin defs here too. This allows code from example RAK sketches to run without
// modification.
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 21; // SLOT_C
static const uint8_t WB_IO4 = 4; // SLOT_C
static const uint8_t WB_IO5 = 9; // SLOT_D
static const uint8_t WB_IO1 = 17; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 34; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 21; // SLOT_C
// static const uint8_t WB_IO4 = 4; // SLOT_C <- already defined above (ln. 94)
// static const uint8_t WB_IO5 = 9; // SLOT_D <- already defined above (ln. 93)
static const uint8_t WB_IO6 = 10; // SLOT_D
static const uint8_t WB_SW1 = 33; // IO_SLOT
static const uint8_t WB_A0 = 5; // IO_SLOT
@@ -314,4 +316,4 @@ SO GPIO 39/TXEN MAY NOT BE DEFINED FOR SUCCESSFUL OPERATION OF THE SX1262 - TG
* Arduino objects - C++ only
*----------------------------------------------------------------------------*/
#endif
#endif