Optimization flags for all NRF52 targets to reduce code size (#8854)

* changes of variants/nrf52840/nrf52.ini and variants/nrf52840/rak4631/platformio.ini * try for nrf52 size reduction, faketec exclude unused radios and meshlink refactor * can't exclude LR11X0 as in schematic there's option for LR1121 * remove -Map flag and -Wl * removed spaces causing error --------- Co-authored-by: macvenez <macvenez@gmail.com>
2025-12-13 22:32:27 +00:00 · 2025-12-04 22:32:42 +01:00
parent aa85fbbcc4
commit 2f4eb25b2f
7 changed files with 40 additions and 220 deletions
--- a/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
+++ b/variants/nrf52840/diy/nrf52_promicro_diy_tcxo/platformio.ini
@@ -5,6 +5,8 @@ board = promicro-nrf52840
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/diy/nrf52_promicro_diy_tcxo>
 lib_deps = 
  ${nrf52840_base.lib_deps}
@@ -20,6 +22,8 @@ build_flags =
  ${inkhud.build_flags}
  -I variants/nrf52840/diy/nrf52_promicro_diy_tcxo
  -D NRF52_PROMICRO_DIY
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
 build_src_filter =
  ${nrf52_base.build_src_filter}
  ${inkhud.build_src_filter}
--- a/variants/nrf52840/meshlink/platformio.ini
+++ b/variants/nrf52840/meshlink/platformio.ini
@@ -9,6 +9,30 @@ board_level = extra
 build_flags = ${nrf52840_base.build_flags}
  -I variants/nrf52840/meshlink
  -D MESHLINK
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  
+build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink>
+lib_deps = 
+  ${nrf52840_base.lib_deps}
+debug_tool = jlink
+; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
+; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
+;upload_protocol = jlink
+
+[env:meshlink_eink]
+extends = nrf52840_base
+board = meshlink
+board_level = extra
+;board_check = true
+build_flags = ${nrf52840_base.build_flags}
+  -I variants/nrf52840/meshlink
+  -D MESHLINK
+  -DRADIOLIB_EXCLUDE_SX128X=1
+  -DRADIOLIB_EXCLUDE_SX127X=1
+  -DRADIOLIB_EXCLUDE_LR11X0=1
+  -D USE_EINK
  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
  -D EINK_WIDTH=250
  -D EINK_HEIGHT=122
--- a/variants/nrf52840/meshlink_eink/platformio.ini
+++ b/variants/nrf52840/meshlink_eink/platformio.ini
@@ -1,31 +0,0 @@
-; MeshLink board developed by LoraItalia. NRF52840, eByte E22900M22S (Will also come with other frequencies), 25w MPPT solar charger (5v,12v,18v selectable), support for gps, buzzer, oled or e-ink display, 10 gpios, hardware watchdog
-; https://www.loraitalia.it
-; firmware for boards with a 250x122 e-ink display
-[env:meshlink_eink]
-extends = nrf52840_base
-board = meshlink
-board_level = extra
-;board_check = true
-build_flags = ${nrf52840_base.build_flags}
-  -I variants/nrf52840/meshlink_eink
-  -D MESHLINK
-  -D EINK_DISPLAY_MODEL=GxEPD2_213_B74
-  -D EINK_WIDTH=250
-  -D EINK_HEIGHT=122
-  -D USE_EINK_DYNAMICDISPLAY            ; Enable Dynamic EInk
-  -D EINK_LIMIT_FASTREFRESH=5           ; How many consecutive fast-refreshes are permitted
-  -D EINK_LIMIT_RATE_BACKGROUND_SEC=30  ; Minimum interval between BACKGROUND updates
-  -D EINK_LIMIT_RATE_RESPONSIVE_SEC=1   ; Minimum interval between RESPONSIVE updates
-  -D EINK_LIMIT_GHOSTING_PX=2000        ; (Optional) How much image ghosting is tolerated
-  -D EINK_BACKGROUND_USES_FAST         ; (Optional) Use FAST refresh for both BACKGROUND and RESPONSIVE, until a limit is reached.
-  -D EINK_HASQUIRK_VICIOUSFASTREFRESH   ; Identify that pixels drawn by fast-refresh are harder to clear
-
-
-build_src_filter = ${nrf52_base.build_src_filter} +<../variants/nrf52840/meshlink_eink>
-lib_deps = 
-  ${nrf52840_base.lib_deps}
-  https://github.com/meshtastic/GxEPD2/archive/55f618961db45a23eff0233546430f1e5a80f63a.zip
-debug_tool = jlink
-; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-; Note: as of 6/2013 the serial/bootloader based programming takes approximately 30 seconds
-;upload_protocol = jlink
--- a/variants/nrf52840/meshlink_eink/variant.cpp
+++ b/variants/nrf52840/meshlink_eink/variant.cpp
@@ -1,23 +0,0 @@
-#include "variant.h"
-#include "nrf.h"
-#include "wiring_constants.h"
-#include "wiring_digital.h"
-
-const uint32_t g_ADigitalPinMap[] = {
-    // P0
-    0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
-
-    // P1
-    32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47};
-
-void initVariant()
-{
-    pinMode(PIN_LED1, OUTPUT);
-    digitalWrite(PIN_LED1, HIGH); // turn off the white led while booting
-                                  // otherwise it will stay lit for several seconds (could be annoying)
-
-#ifdef PIN_WD_EN
-    pinMode(PIN_WD_EN, OUTPUT);
-    digitalWrite(PIN_WD_EN, HIGH); // Enable the Watchdog at boot
-#endif
-}
--- a/variants/nrf52840/meshlink_eink/variant.h
+++ b/variants/nrf52840/meshlink_eink/variant.h
@@ -1,153 +0,0 @@
-#ifndef _VARIANT_MESHLINK_
-#define _VARIANT_MESHLINK_
-#ifndef MESHLINK
-#define MESHLINK
-#endif
-/** Master clock frequency */
-#define VARIANT_MCK (64000000ul)
-
-// #define USE_LFXO // Board uses 32khz crystal for LF
-#define USE_LFRC // Board uses RC for LF
-
-/*----------------------------------------------------------------------------
- *        Headers
- *----------------------------------------------------------------------------*/
-
-#include "WVariant.h"
-
-#ifdef __cplusplus
-extern "C" {
-#endif // __cplusplus
-
-// Number of pins defined in PinDescription array
-#define PINS_COUNT (48)
-#define NUM_DIGITAL_PINS (48)
-#define NUM_ANALOG_INPUTS (2)
-#define NUM_ANALOG_OUTPUTS (0)
-
-#define BUTTON_PIN (-1) // If defined, this will be used for user button presses,
-#define BUTTON_NEED_PULLUP
-
-// LEDs
-#define PIN_LED1 (24) // Built in white led for status
-#define LED_BLUE PIN_LED1
-#define LED_BUILTIN PIN_LED1
-
-#define LED_STATE_ON 0 // State when LED is litted
-#define LED_INVERTED 1
-
-// Testing USB detection
-// #define NRF_APM
-
-/*
- * Analog pins
- */
-#define PIN_A1 (3) // P0.03/AIN1
-#define ADC_RESOLUTION 14
-
-// Other pins
-// #define PIN_AREF (2)
-// static const uint8_t AREF = PIN_AREF;
-
-/*
- * Serial interfaces
- */
-#define PIN_SERIAL1_RX (32 + 8)
-#define PIN_SERIAL1_TX (7)
-
-/*
- * SPI Interfaces
- */
-#define SPI_INTERFACES_COUNT 2
-
-#define PIN_SPI_MISO (8)
-#define PIN_SPI_MOSI (32 + 9)
-#define PIN_SPI_SCK (11)
-
-#define PIN_SPI1_MISO (23)
-#define PIN_SPI1_MOSI (21)
-#define PIN_SPI1_SCK (19)
-
-static const uint8_t SS = 12;
-static const uint8_t MOSI = PIN_SPI_MOSI;
-static const uint8_t MISO = PIN_SPI_MISO;
-static const uint8_t SCK = PIN_SPI_SCK;
-
-/*
- * eink display pins
- */
-#define USE_EINK
-
-#define PIN_EINK_CS (15)
-#define PIN_EINK_BUSY (16)
-#define PIN_EINK_DC (14)
-#define PIN_EINK_RES (17)
-#define PIN_EINK_SCLK (19)
-#define PIN_EINK_MOSI (21) // also called SDI
-
-/*
- * Wire Interfaces
- */
-#define WIRE_INTERFACES_COUNT 1
-
-#define PIN_WIRE_SDA (1)
-#define PIN_WIRE_SCL (27)
-
-// QSPI Pins
-#define PIN_QSPI_SCK 19
-#define PIN_QSPI_CS 22
-#define PIN_QSPI_IO0 21
-#define PIN_QSPI_IO1 23
-#define PIN_QSPI_IO2 32
-#define PIN_QSPI_IO3 20
-
-// On-board QSPI Flash
-#define EXTERNAL_FLASH_DEVICES W25Q16JVUXIQ
-#define EXTERNAL_FLASH_USE_QSPI
-
-#define USE_SX1262
-#define SX126X_CS (12)
-#define SX126X_DIO1 (32 + 1)
-#define SX126X_BUSY (32 + 3)
-#define SX126X_RESET (6)
-// #define SX126X_RXEN (13)
-// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
-#define SX126X_DIO2_AS_RF_SWITCH
-#define SX126X_DIO3_TCXO_VOLTAGE 1.8
-
-// pin 25 is used to enable or disable the watchdog. This pin has to be disabled when cpu is put to sleep
-// otherwise the timer will expire and wd will reboot the cpu
-#define PIN_WD_EN (25)
-
-#define PIN_GPS_PPS (26) // Pulse per second input from the GPS
-
-#define GPS_TX_PIN PIN_SERIAL1_TX // This is for bits going TOWARDS the CPU
-#define GPS_RX_PIN PIN_SERIAL1_RX // This is for bits going TOWARDS the GPS
-
-// #define GPS_THREAD_INTERVAL 50
-
-// Define pin to enable GPS toggle (set GPIO to LOW) via user button triple press
-#define PIN_GPS_EN (0)
-#define GPS_EN_ACTIVE LOW
-
-#define PIN_BUZZER (31) // P0.31/AIN7
-
-// Battery
-// The battery sense is hooked to pin A0 (2)
-#define BATTERY_PIN (2)
-// and has 12 bit resolution
-#define BATTERY_SENSE_RESOLUTION_BITS 12
-#define BATTERY_SENSE_RESOLUTION 4096.0
-#undef AREF_VOLTAGE
-#define AREF_VOLTAGE 3.0
-#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
-#define ADC_MULTIPLIER 1.42 // fine tuning of voltage
-
-#ifdef __cplusplus
-}
-#endif
-
-/*----------------------------------------------------------------------------
- *        Arduino objects - C++ only
- *----------------------------------------------------------------------------*/
-#endif
--- a/variants/nrf52840/nrf52.ini
+++ b/variants/nrf52840/nrf52.ini
@@ -11,7 +11,7 @@ platform_packages =
  ; Don't renovate toolchain-gccarmnoneeabi
  platformio/toolchain-gccarmnoneeabi@~1.90301.0

-build_type = debug
+build_type = release
 build_flags =
  -include variants/nrf52840/cpp_overrides/lfs_util.h
  ${arduino_base.build_flags}
@@ -21,6 +21,17 @@ build_flags =
  -DLFS_NO_ASSERT                      ; Disable LFS assertions , see https://github.com/meshtastic/firmware/pull/3818
  -DMESHTASTIC_EXCLUDE_AUDIO=1
  -DMESHTASTIC_EXCLUDE_PAXCOUNTER=1
+  -Os
+build_unflags =
+  -Ofast
+  -Og
+  -ggdb3
+  -ggdb2
+  -g3
+  -g2
+  -g
+  -g1
+  -g0

 build_src_filter = 
  ${arduino_base.build_src_filter} -<platform/esp32/> -<platform/stm32wl> -<nimble/> -<mesh/wifi/> -<mesh/api/> -<mesh/http/> -<modules/esp32> -<platform/rp2xx0> -<mesh/eth/> -<mesh/raspihttp> -<serialization/>
--- a/variants/nrf52840/rak4631/platformio.ini
+++ b/variants/nrf52840/rak4631/platformio.ini
@@ -12,18 +12,6 @@ build_flags = ${nrf52840_base.build_flags}
  -DRADIOLIB_EXCLUDE_SX128X=1
  -DRADIOLIB_EXCLUDE_SX127X=1
  -DRADIOLIB_EXCLUDE_LR11X0=1
-  -Os
-  -Wl,-Map=$BUILD_DIR/output.map
-build_unflags =
-  -Ofast
-  -Og
-  -ggdb3
-  -ggdb2
-  -g3
-  -g2
-  -g
-  -g1
-  -g0
 build_src_filter = ${nrf52_base.build_src_filter} \
  +<../variants/nrf52840/rak4631> \
  +<mesh/eth/> \