Merge branch 'develop' into t-watch-ultra

src/configuration.h

@@ -117,7 +117,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define SX126X_MAX_POWER 22
 #endif
 
-#ifdef HELTEC_V4
+#ifdef USE_GC1109_PA
 // Power Amps are often non-linear, so we can use an array of values for the power curve
 #define NUM_PA_POINTS 22
 #define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7

src/graphics/Screen.cpp

@@ -453,7 +453,7 @@ void Screen::handleSetOn(bool on, FrameCallback einkScreensaver)
 #endif
 
             dispdev->displayOn();
-#ifdef HELTEC_TRACKER_V1_X
+#if defined(HELTEC_TRACKER_V1_X) || defined(HELTEC_WIRELESS_TRACKER_V2)
             ui->init();
 #endif
 #ifdef USE_ST7789

src/graphics/draw/MenuHandler.cpp

@@ -116,6 +116,8 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
     bannerOptions.bannerCallback = [](int selected) -> void {
         if (selected != 0 && config.lora.region != _meshtastic_Config_LoRaConfig_RegionCode(selected)) {
             config.lora.region = _meshtastic_Config_LoRaConfig_RegionCode(selected);
+            auto changes = SEGMENT_CONFIG;
+
             // This is needed as we wait til picking the LoRa region to generate keys for the first time.
             if (!owner.is_licensed) {
                 bool keygenSuccess = false;
@@ -124,6 +126,7 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
                     if (crypto->regeneratePublicKey(config.security.public_key.bytes, config.security.private_key.bytes)) {
                         keygenSuccess = true;
                     }
+
                 } else {
                     LOG_INFO("Generate new PKI keys");
                     crypto->generateKeyPair(config.security.public_key.bytes, config.security.private_key.bytes);
@@ -141,7 +144,14 @@ void menuHandler::LoraRegionPicker(uint32_t duration)
             if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
-            service->reloadConfig(SEGMENT_CONFIG);
+
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default broker is in use, so subscribe to the appropriate MQTT root topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+                changes |= SEGMENT_MODULECONFIG;
+            }
+
+            service->reloadConfig(changes);
             rebootAtMsec = (millis() + DEFAULT_REBOOT_SECONDS * 1000);
         }
     };

src/mesh/NodeDB.cpp

@@ -56,6 +56,10 @@
 #include <WiFiOTA.h>
 #endif
 
+// stringify
+#define xstr(s) str(s)
+#define str(s) #s
+
 NodeDB *nodeDB = nullptr;
 
 // we have plenty of ram so statically alloc this tempbuf (for now)
@@ -1152,6 +1156,20 @@ void NodeDB::loadFromDisk()
     spiLock->unlock();
 #endif
 #ifdef FSCom
+#ifdef FACTORY_INSTALL
+    spiLock->lock();
+    if (!FSCom.exists("/prefs/" xstr(BUILD_EPOCH))) {
+        LOG_WARN("Factory Install Reset!");
+        FSCom.format();
+        FSCom.mkdir("/prefs");
+        File f2 = FSCom.open("/prefs/" xstr(BUILD_EPOCH), FILE_O_WRITE);
+        if (f2) {
+            f2.flush();
+            f2.close();
+        }
+    }
+    spiLock->unlock();
+#endif
     spiLock->lock();
     if (FSCom.exists(legacyPrefFileName)) {
         spiLock->unlock();

src/mesh/SX126xInterface.cpp

@@ -52,7 +52,7 @@ template <typename T> bool SX126xInterface<T>::init()
     pinMode(SX126X_POWER_EN, OUTPUT);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     pinMode(LORA_PA_POWER, OUTPUT);
     digitalWrite(LORA_PA_POWER, HIGH);
 
@@ -352,7 +352,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
     digitalWrite(SX126X_POWER_EN, LOW);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     /*
      * Do not switch the power on and off frequently.
      * After turning off LORA_PA_EN, the power consumption has dropped to the uA level.
@@ -367,7 +367,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
 /** Some boards require GPIO control of tx vs rx paths */
 template <typename T> void SX126xInterface<T>::setTransmitEnable(bool txon)
 {
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     digitalWrite(LORA_PA_POWER, HIGH);
     digitalWrite(LORA_PA_EN, HIGH);
     digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);

src/mesh/generated/meshtastic/device_ui.pb.h

@@ -68,6 +68,8 @@ typedef enum _meshtastic_Language {
     meshtastic_Language_BULGARIAN = 17,
     /* Czech */
     meshtastic_Language_CZECH = 18,
+    /* Danish */
+    meshtastic_Language_DANISH = 19,
     /* Simplified Chinese (experimental) */
     meshtastic_Language_SIMPLIFIED_CHINESE = 30,
     /* Traditional Chinese (experimental) */

src/modules/AdminModule.cpp

@@ -784,11 +784,24 @@ void AdminModule::handleSetConfig(const meshtastic_Config &c)
             if (myRegion->dutyCycle < 100) {
                 config.lora.ignore_mqtt = true; // Ignore MQTT by default if region has a duty cycle limit
             }
+            //  Compare the entire string, we are sure of the length as a topic has never been set
             if (strcmp(moduleConfig.mqtt.root, default_mqtt_root) == 0) {
                 sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
                 changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
             }
         }
+        if (config.lora.region != myRegion->code) {
+            //  Region has changed so check whether there is a regulatory one we should be using instead.
+            //  Additionally as a side-effect, assume a new value under myRegion
+            initRegion();
+
+            if (strncmp(moduleConfig.mqtt.root, default_mqtt_root, strlen(default_mqtt_root)) == 0) {
+                //  Default root is in use, so subscribe to the appropriate MQTT topic for this region
+                sprintf(moduleConfig.mqtt.root, "%s/%s", default_mqtt_root, myRegion->name);
+            }
+
+            changes = SEGMENT_CONFIG | SEGMENT_MODULECONFIG;
+        }
         break;
     }
     case meshtastic_Config_bluetooth_tag:

src/platform/esp32/architecture.h

@@ -201,6 +201,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_V4
 #elif defined(M5STACK_UNITC6L)
 #define HW_VENDOR meshtastic_HardwareModel_M5STACK_C6L
+#elif defined(HELTEC_WIRELESS_TRACKER_V2)
+#define HW_VENDOR meshtastic_HardwareModel_HELTEC_WIRELESS_TRACKER_V2
 #elif defined(T_WATCH_ULTRA)
 #define HW_VENDOR meshtastic_HardwareModel_T_WATCH_ULTRA
 #endif

src/platform/nrf52/architecture.h

@@ -55,6 +55,8 @@
 #define HW_VENDOR meshtastic_HardwareModel_GAT562_MESH_TRIAL_TRACKER
 #elif defined(NOMADSTAR_METEOR_PRO)
 #define HW_VENDOR meshtastic_HardwareModel_NOMADSTAR_METEOR_PRO
+#elif defined(R1_NEO)
+#define HW_VENDOR meshtastic_HardwareModel_MUZI_R1_NEO
 // MAke sure all custom RAK4630 boards are defined before the generic RAK4630
 #elif defined(RAK4630)
 #define HW_VENDOR meshtastic_HardwareModel_RAK4631
@@ -98,8 +100,6 @@
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1_EINK
 #elif defined(SEEED_WIO_TRACKER_L1)
 #define HW_VENDOR meshtastic_HardwareModel_SEEED_WIO_TRACKER_L1
-#elif defined(R1_NEO)
-#define HW_VENDOR meshtastic_HardwareModel_MUZI_R1_NEO
 #elif defined(HELTEC_MESH_SOLAR)
 #define HW_VENDOR meshtastic_HardwareModel_HELTEC_MESH_SOLAR
 #else

src/sleep.cpp

@@ -553,7 +553,7 @@ void enableLoraInterrupt()
     gpio_pullup_en((gpio_num_t)LORA_CS);
 #endif
 
-#ifdef HELTEC_V4
+#if defined(USE_GC1109_PA)
     gpio_pullup_en((gpio_num_t)LORA_PA_POWER);
     gpio_pullup_en((gpio_num_t)LORA_PA_EN);
     gpio_pulldown_en((gpio_num_t)LORA_PA_TX_EN);