diff --git a/bin/config.d/lora-usb-umesh-1262-30dbm.yaml b/bin/config.d/lora-usb-umesh-1262-30dbm.yaml
new file mode 100644
index 000000000..7726eccd1
--- /dev/null
+++ b/bin/config.d/lora-usb-umesh-1262-30dbm.yaml
@@ -0,0 +1,23 @@
+Lora:
+  Module: sx1262
+  CS: 0
+  IRQ: 6
+  Reset: 1
+  Busy: 4
+  RXen: 2
+  DIO2_AS_RF_SWITCH: true
+  spidev: ch341
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  DIO3_TCXO_VOLTAGE: true
+#  USB_Serialnum: 12345678
+  SX126X_MAX_POWER: 22
+# Reduce output power to improve EMI
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
+# Note: This module integrates an additional PA to achieve higher output power.
+# The 'power' parameter here does not represent the actual RF output.
+# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
+# Each array element corresponds to the additional gain when that input level is set,
+# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
+# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.
diff --git a/bin/config.d/lora-usb-umesh-1262.yaml b/bin/config.d/lora-usb-umesh-1262.yaml
deleted file mode 100644
index 6008e63b7..000000000
--- a/bin/config.d/lora-usb-umesh-1262.yaml
+++ /dev/null
@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1262
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI
diff --git a/bin/config.d/lora-usb-umesh-1268-30dbm.yaml b/bin/config.d/lora-usb-umesh-1268-30dbm.yaml
new file mode 100644
index 000000000..c054a92f9
--- /dev/null
+++ b/bin/config.d/lora-usb-umesh-1268-30dbm.yaml
@@ -0,0 +1,23 @@
+Lora:
+  Module: sx1268
+  CS: 0
+  IRQ: 6
+  Reset: 1
+  Busy: 4
+  RXen: 2
+  DIO2_AS_RF_SWITCH: true
+  spidev: ch341
+  USB_PID: 0x5512
+  USB_VID: 0x1A86
+  DIO3_TCXO_VOLTAGE: true
+#  USB_Serialnum: 12345678
+  SX126X_MAX_POWER: 22
+# Reduce output power to improve EMI
+  NUM_PA_POINTS: 22
+  TX_GAIN_LORA: 12, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 8, 8, 7
+# Note: This module integrates an additional PA to achieve higher output power.
+# The 'power' parameter here does not represent the actual RF output.
+# TX_GAIN_LORA defines the gain offset applied at each SX1262 input power step (1–22 dBm).
+# Each array element corresponds to the additional gain when that input level is set,
+# The effective RF output is: Pout ≈ Pset + TX_GAIN_LORA[index].
+# Please refer to https://github.com/linser233/uMesh/blob/main/RF_Power.md for detailed information.
diff --git a/bin/config.d/lora-usb-umesh-1268.yaml b/bin/config.d/lora-usb-umesh-1268.yaml
deleted file mode 100644
index 637472966..000000000
--- a/bin/config.d/lora-usb-umesh-1268.yaml
+++ /dev/null
@@ -1,15 +0,0 @@
-Lora:
-  Module: sx1268
-  CS: 0
-  IRQ: 6
-  Reset: 1
-  Busy: 4
-  RXen: 2
-  DIO2_AS_RF_SWITCH: true
-  spidev: ch341
-  USB_PID: 0x5512
-  USB_VID: 0x1A86
-  DIO3_TCXO_VOLTAGE: true
-#  USB_Serialnum: 12345678
-  SX126X_MAX_POWER: 30
-# Reduce output power to improve EMI