coroutines: wip compiles but does not link

platformio.ini

@@ -30,6 +30,7 @@ build_flags = -Wno-missing-field-initializers -Isrc -Isrc/mesh -Isrc/gps -Ilib/n
   -DHW_VERSION_${sysenv.COUNTRY}
   -DAPP_VERSION=${sysenv.APP_VERSION}
   -DHW_VERSION=${sysenv.HW_VERSION}
+  -DUSE_THREAD_NAMES
 
 ; leave this commented out to avoid breaking Windows
 ;upload_port = /dev/ttyUSB0

src/Power.cpp

@@ -62,6 +62,8 @@ class AnalogBatteryLevel : public HasBatteryLevel
     virtual bool isBatteryConnect() { return getBattVoltage() != -1; }
 } analogLevel;
 
+Power::Power() : OSThread("Power") {}
+
 bool Power::analogInit()
 {
 #ifdef BATTERY_PIN
@@ -86,10 +88,7 @@ bool Power::setup()
     if (!found) {
         found = analogInit();
     }
-    if (found) {
+    enabled = found;
-        concurrency::PeriodicTask::setup(); // We don't start our periodic task unless we actually found the device
-        setPeriod(1);
-    }
 
     return found;
 }
@@ -135,13 +134,46 @@ void Power::readPowerStatus()
     }
 }
 
-void Power::doTask()
+uint32_t Power::runOnce()
 {
     readPowerStatus();
 
+#ifdef PMU_IRQ
+    if (pmu_irq) {
+        pmu_irq = false;
+        axp.readIRQ();
+
+        DEBUG_MSG("pmu irq!\n");
+
+        if (axp.isChargingIRQ()) {
+            DEBUG_MSG("Battery start charging\n");
+        }
+        if (axp.isChargingDoneIRQ()) {
+            DEBUG_MSG("Battery fully charged\n");
+        }
+        if (axp.isVbusRemoveIRQ()) {
+            DEBUG_MSG("USB unplugged\n");
+            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
+        }
+        if (axp.isVbusPlugInIRQ()) {
+            DEBUG_MSG("USB plugged In\n");
+            powerFSM.trigger(EVENT_POWER_CONNECTED);
+        }
+        if (axp.isBattPlugInIRQ()) {
+            DEBUG_MSG("Battery inserted\n");
+        }
+        if (axp.isBattRemoveIRQ()) {
+            DEBUG_MSG("Battery removed\n");
+        }
+        if (axp.isPEKShortPressIRQ()) {
+            DEBUG_MSG("PEK short button press\n");
+        }
+        axp.clearIRQ();
+    }
+#endif
+
     // Only read once every 20 seconds once the power status for the app has been initialized
-    if (statusHandler && statusHandler->isInitialized())
+    return (statusHandler && statusHandler->isInitialized()) ? (1000 * 20) : 0;
-        setPeriod(1000 * 20);
 }
 
 /**
@@ -208,8 +240,7 @@ bool Power::axp192Init()
             // no battery also it could cause inadvertent waking from light sleep just because the battery filled
             // we don't look for AXP202_BATT_REMOVED_IRQ because it occurs repeatedly while no battery installed
             // we don't look at AXP202_VBUS_REMOVED_IRQ because we don't have anything hooked to vbus
-            axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ,
+            axp.enableIRQ(AXP202_BATT_CONNECT_IRQ | AXP202_VBUS_CONNECT_IRQ | AXP202_PEK_SHORTPRESS_IRQ, 1);
-                          1);
 
             axp.clearIRQ();
 #endif
@@ -226,43 +257,3 @@ bool Power::axp192Init()
     return false;
 #endif
 }
-
-void Power::loop()
-{
-#ifdef PMU_IRQ
-    if (pmu_irq) {
-        pmu_irq = false;
-        axp.readIRQ();
-
-        DEBUG_MSG("pmu irq!\n");
-
-        if (axp.isChargingIRQ()) {
-            DEBUG_MSG("Battery start charging\n");
-        }
-        if (axp.isChargingDoneIRQ()) {
-            DEBUG_MSG("Battery fully charged\n");
-        }
-        if (axp.isVbusRemoveIRQ()) {
-            DEBUG_MSG("USB unplugged\n");
-            powerFSM.trigger(EVENT_POWER_DISCONNECTED);
-        }
-        if (axp.isVbusPlugInIRQ()) {
-            DEBUG_MSG("USB plugged In\n");
-            powerFSM.trigger(EVENT_POWER_CONNECTED);
-        }
-        if (axp.isBattPlugInIRQ()) {
-            DEBUG_MSG("Battery inserted\n");
-        }
-        if (axp.isBattRemoveIRQ()) {
-            DEBUG_MSG("Battery removed\n");
-        }
-        if (axp.isPEKShortPressIRQ()) {
-            DEBUG_MSG("PEK short button press\n");
-        }
-
-        readPowerStatus();
-        axp.clearIRQ();
-    }
-
-#endif
-}

src/concurrency/NotifiedWorkerThread.h

@@ -1,37 +1,45 @@
 #pragma once
 
-#include "WorkerThread.h"
+#include "OSThread.h"
 
-namespace concurrency {
+namespace concurrency
+{
 
 /**
  * @brief A worker thread that waits on a freertos notification
  */
-class NotifiedWorkerThread : public WorkerThread
+class NotifiedWorkerThread : public OSThread
 {
   public:
+    NotifiedWorkerThread(const char *name) : OSThread(name) {}
+
     /**
      * Notify this thread so it can run
      */
-    virtual void notify(uint32_t v = 0, eNotifyAction action = eNoAction) = 0;
+    void notify(uint32_t v, bool overwrite);
 
     /**
      * Notify from an ISR
      *
      * This must be inline or IRAM_ATTR on ESP32
      */
-    virtual void notifyFromISR(BaseType_t *highPriWoken, uint32_t v = 0, eNotifyAction action = eNoAction) { notify(v, action); }
+    void notifyFromISR(BaseType_t *highPriWoken, uint32_t v, bool overwrite) { notify(v, overwrite); }
+
+    /**
+     * Schedule a notification to fire in delay msecs
+     */
+    void notifyLater(uint32_t delay, uint32_t v, bool overwrite);
 
   protected:
+    virtual void onNotify(uint32_t notification) = 0;
+
+    virtual uint32_t runOnce();
+
+  private:
     /**
-     * The notification that was most recently used to wake the thread.  Read from loop()
+     * The notification that was most recently used to wake the thread.  Read from runOnce()
      */
     uint32_t notification = 0;
-
-    /**
-     * A method that should block execution - either waiting ona queue/mutex or a "task notification"
-     */
-    virtual void block() = 0;
 };
 
 } // namespace concurrency

src/concurrency/OSThread.h

@@ -4,11 +4,13 @@
 #include <stdint.h>
 
 #include "Thread.h"
-#include "freertosinc.h"
+#include "ThreadController.h"
 
 namespace concurrency
 {
 
+extern ThreadController mainController, timerController;
+
 /**
  * @brief Base threading
  *
@@ -17,23 +19,32 @@ namespace concurrency
  * sleeping the correct amount of time in main
  * NotifiedWorkerThread set/clears enabled
  *
+ * notifyLater should start now - not relative to last start time
+ * clear notification before calling handler
+ *
  * stopping sleep instantly as soon as an event occurs.
  * use global functions delayTillWakeEvent(time), doWakeEvent(isInISR) - use freertos mutex or somesuch
  *
+ * have router thread block on its message queue in runOnce
+ *
  * remove lock/lockguard
  */
-class OSThread
+class OSThread : public Thread
 {
-  public:
+    ThreadController *controller;
-    virtual ~OSThread() {}
 
-    // uint32_t getStackHighwaterMark() { return uxTaskGetStackHighWaterMark(taskHandle); }
+  public:
+    OSThread(const char *name, uint32_t period = 0, ThreadController *controller = &mainController);
+
+    virtual ~OSThread();
 
   protected:
     /**
      * The method that will be called each time our thread gets a chance to run
+     *
+     * Returns desired period for next invocation (or 0 for no change)
      */
-    virtual void runOnce() = 0;
+    virtual uint32_t runOnce() = 0;
 };
 
 } // namespace concurrency

src/concurrency/Periodic.h

@@ -1,26 +1,24 @@
 #pragma once
 
-#include "PeriodicTask.h"
+#include "concurrency/OSThread.h"
 
-namespace concurrency {
+namespace concurrency
+{
 
 /**
  * @brief Periodically invoke a callback. This just provides C-style callback conventions
  *        rather than a virtual function - FIXME, remove?
  */
-class Periodic : public PeriodicTask
+class Periodic : public OSThread
 {
     uint32_t (*callback)();
 
   public:
     // callback returns the period for the next callback invocation (or 0 if we should no longer be called)
-    Periodic(uint32_t (*_callback)()) : callback(_callback) {}
+    Periodic(const char *name, uint32_t (*_callback)()) : OSThread(name), callback(_callback) {}
 
   protected:
-    void doTask() {
+    uint32_t runOnce() { return callback(); }
-        uint32_t p = callback();
-        setPeriod(p);
-    }
 };
 
 } // namespace concurrency

src/concurrency/PeriodicTask.cpp

@@ -1,16 +0,0 @@
-#include "PeriodicTask.h"
-#include "Periodic.h"
-#include "LockGuard.h"
-
-namespace concurrency {
-
-PeriodicScheduler periodicScheduler;
-
-PeriodicTask::PeriodicTask(uint32_t initialPeriod) : period(initialPeriod) {}
-
-void PeriodicTask::setup()
-{
-    periodicScheduler.schedule(this);
-}
-
-} // namespace concurrency

src/concurrency/PeriodicTask.h

@@ -1,54 +0,0 @@
-#pragma once
-
-#include <Arduino.h>
-#include "PeriodicScheduler.h"
-
-namespace concurrency {
-
-/**
- * @brief A base class for tasks that want their doTask() method invoked periodically
- *
- * @todo currently just syntatic sugar for polling in loop (you must call .loop), but eventually
- *        generalize with the freertos scheduler so we can save lots of power by having everything either in
- *        something like this or triggered off of an irq.
- */
-class PeriodicTask
-{
-    uint32_t lastMsec = 0;
-    uint32_t period = 1; // call soon after creation
-
-  public:
-    virtual ~PeriodicTask() { periodicScheduler.unschedule(this); }
-
-    /**
-     * Constructor (will schedule with the global PeriodicScheduler)
-     */
-    PeriodicTask(uint32_t initialPeriod = 1);
-
-    /** 
-     * MUST be be called once at startup (but after threading is running - i.e. not from a constructor)
-     */
-    void setup();
-
-    /**
-     * Set a new period in msecs (can be called from doTask or elsewhere and the scheduler will cope)
-     * While zero this task is disabled and will not run
-     */
-    void setPeriod(uint32_t p)
-    {
-        lastMsec = millis(); // reset starting from now
-        period = p;
-    }
-
-    uint32_t getPeriod() const { return period; }
-
-    /**
-     * Syntatic sugar for suspending tasks
-     */
-    void disable();
-
-  protected:
-    virtual void doTask() = 0;
-};
-
-} // namespace concurrency

src/concurrency/WorkerThread.cpp

@@ -1,31 +0,0 @@
-#include "WorkerThread.h"
-
-namespace concurrency {
-
-void WorkerThread::doRun()
-{
-    startWatchdog();
-
-    while (!wantExit) {
-        stopWatchdog();
-        block();
-        startWatchdog();
-
-        // no need - startWatchdog is guaranteed to give us one full watchdog interval
-        // serviceWatchdog(); // Let our loop worker have one full watchdog interval (at least) to run
-
-#ifdef DEBUG_STACK
-        static uint32_t lastPrint = 0;
-        if (millis() - lastPrint > 10 * 1000L) {
-            lastPrint = millis();
-            meshtastic::printThreadInfo("net");
-        }
-#endif
-
-        loop();
-    }
-
-    stopWatchdog();
-}
-
-} // namespace concurrency

src/concurrency/WorkerThread.h

@@ -1,25 +0,0 @@
-#pragma once
-
-#include "OSThread.h"
-
-namespace concurrency
-{
-
-/**
- * @brief This wraps threading (FreeRTOS for now) with a blocking API intended for efficiently converting
- *        old-school arduino loop() code. Use as a mixin base class for the classes you want to convert.
- *
- * @link https://www.freertos.org/RTOS_Task_Notification_As_Mailbox.html
- */
-class WorkerThread : public OSThread
-{
-  protected:
-    /**
-     * Return true if this thread is ready to run - either waiting ona queue/mutex or a "task notification"
-     */
-    virtual bool shouldRun() = 0;
-
-    virtual void loop() = 0;
-};
-
-} // namespace concurrency

src/gps/NMEAGPS.h

@@ -1,6 +1,5 @@
 #pragma once
 
-#include "../concurrency/PeriodicTask.h"
 #include "GPS.h"
 #include "Observer.h"
 #include "TinyGPS++.h"

src/graphics/Screen.cpp

@@ -561,7 +561,7 @@ void _screen_header()
 }
 #endif
 
-Screen::Screen(uint8_t address, int sda, int scl) : cmdQueue(32), dispdev(address, sda, scl), ui(&dispdev) {}
+Screen::Screen(uint8_t address, int sda, int scl) : OSThread("Screen"), cmdQueue(32), dispdev(address, sda, scl), ui(&dispdev) {}
 
 void Screen::handleSetOn(bool on)
 {
@@ -573,9 +573,12 @@ void Screen::handleSetOn(bool on)
             DEBUG_MSG("Turning on screen\n");
             dispdev.displayOn();
             dispdev.displayOn();
+            enabled = true;
+            setInterval(0); // Draw ASAP
         } else {
             DEBUG_MSG("Turning off screen\n");
             dispdev.displayOff();
+            enabled = false;
         }
         screenOn = on;
     }
@@ -583,8 +586,6 @@ void Screen::handleSetOn(bool on)
 
 void Screen::setup()
 {
-    concurrency::PeriodicTask::setup();
-
     // We don't set useDisplay until setup() is called, because some boards have a declaration of this object but the device
     // is never found when probing i2c and therefore we don't call setup and never want to do (invalid) accesses to this device.
     useDisplay = true;
@@ -642,12 +643,12 @@ void Screen::setup()
     nodeStatusObserver.observe(&nodeStatus->onNewStatus);
 }
 
-void Screen::doTask()
+uint32_t Screen::runOnce()
 {
     // If we don't have a screen, don't ever spend any CPU for us.
     if (!useDisplay) {
-        setPeriod(0);
+        enabled = false;
-        return;
+        return 0;
     }
 
     // Process incoming commands.
@@ -684,8 +685,8 @@ void Screen::doTask()
 
     if (!screenOn) { // If we didn't just wake and the screen is still off, then
                      // stop updating until it is on again
-        setPeriod(0);
+        enabled = false;
-        return;
+        return 0;
     }
 
     // Switch to a low framerate (to save CPU) when we are not in transition
@@ -711,7 +712,7 @@ void Screen::doTask()
     // soon, otherwise just 1 fps (to save CPU) We also ask to be called twice
     // as fast as we really need so that any rounding errors still result with
     // the correct framerate
-    setPeriod(1000 / targetFramerate);
+    return (1000 / targetFramerate);
 }
 
 void Screen::drawDebugInfoTrampoline(OLEDDisplay *display, OLEDDisplayUiState *state, int16_t x, int16_t y)
@@ -801,7 +802,7 @@ void Screen::handleOnPress()
     // If screen was off, just wake it, otherwise advance to next frame
     // If we are in a transition, the press must have bounced, drop it.
     if (ui.getUiState()->frameState == FIXED) {
-        setPeriod(1); // redraw ASAP
+        setInterval(0); // redraw ASAP
         ui.nextFrame();
 
         DEBUG_MSG("Setting fast framerate\n");
@@ -1062,7 +1063,7 @@ int Screen::handleStatusUpdate(const meshtastic::Status *arg)
         if (nodeDB.updateTextMessage || nodeStatus->getLastNumTotal() != nodeStatus->getNumTotal()) {
             setFrames();    // Regen the list of screens
             prevFrame = -1; // Force a GUI update
-            setPeriod(1);   // Update the screen right away
+            setInterval(0); // Update the screen right away
         }
         nodeDB.updateGUI = false;
         nodeDB.updateTextMessage = false;

src/graphics/Screen.h

@@ -15,7 +15,7 @@
 #include "TypedQueue.h"
 #include "commands.h"
 #include "concurrency/LockGuard.h"
-#include "concurrency/PeriodicTask.h"
+#include "concurrency/OSThread.h"
 #include "power.h"
 #include <string>
 
@@ -62,7 +62,7 @@ class DebugInfo
  *          multiple times simultaneously. All state-changing calls are queued and executed
  *          when the main loop calls us.
  */
-class Screen : public concurrency::PeriodicTask
+class Screen : public concurrency::OSThread
 {
     CallbackObserver<Screen, const meshtastic::Status *> powerStatusObserver =
         CallbackObserver<Screen, const meshtastic::Status *>(this, &Screen::handleStatusUpdate);
@@ -184,7 +184,7 @@ class Screen : public concurrency::PeriodicTask
     /// Updates the UI.
     //
     // Called periodically from the main loop.
-    void doTask() final;
+    uint32_t runOnce() final;
 
   private:
     struct ScreenCmd {
@@ -202,7 +202,7 @@ class Screen : public concurrency::PeriodicTask
             return true; // claim success if our display is not in use
         else {
             bool success = cmdQueue.enqueue(cmd, 0);
-            setPeriod(1); // handle ASAP
+            setInterval(0); // handle ASAP
             return success;
         }
     }

src/main.cpp

@@ -1,25 +1,3 @@
-/*
-
-  Main module
-
-  # Modified by Kyle T. Gabriel to fix issue with incorrect GPS data for TTNMapper
-
-  Copyright (C) 2018 by Xose Pérez <xose dot perez at gmail dot com>
-
-  This program is free software: you can redistribute it and/or modify
-  it under the terms of the GNU General Public License as published by
-  the Free Software Foundation, either version 3 of the License, or
-  (at your option) any later version.
-
-  This program is distributed in the hope that it will be useful,
-  but WITHOUT ANY WARRANTY; without even the implied warranty of
-  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-  GNU General Public License for more details.
-
-  You should have received a copy of the GNU General Public License
-  along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-*/
 
 #include "Air530GPS.h"
 #include "MeshRadio.h"
@@ -27,7 +5,6 @@
 #include "NodeDB.h"
 #include "PowerFSM.h"
 #include "UBloxGPS.h"
-#include "concurrency/Periodic.h"
 #include "configuration.h"
 #include "error.h"
 #include "power.h"
@@ -36,6 +13,7 @@
 // #include "debug.h"
 #include "RTC.h"
 #include "SPILock.h"
+#include "concurrency/Periodic.h"
 #include "graphics/Screen.h"
 #include "main.h"
 #include "meshwifi/meshhttp.h"
@@ -134,7 +112,7 @@ static uint32_t ledBlinker()
     return powerStatus->getIsCharging() ? 1000 : (ledOn ? 2 : 1000);
 }
 
-concurrency::Periodic ledPeriodic(ledBlinker);
+concurrency::Periodic ledPeriodic("Blink", ledBlinker);
 
 // Prepare for button presses
 #ifdef BUTTON_PIN
@@ -203,8 +181,6 @@ void setup()
     digitalWrite(LED_PIN, 1 ^ LED_INVERTED); // turn on for now
 #endif
 
-    ledPeriodic.setup();
-
     // Hello
     DEBUG_MSG("Meshtastic swver=%s, hwver=%s\n", optstr(APP_VERSION), optstr(HW_VERSION));
 
@@ -378,11 +354,8 @@ void loop()
 
     if (gps)
         gps->loop(); // FIXME, remove from main, instead block on read
-    router.loop();
     powerFSM.run_machine();
-    service.loop();
 
-    concurrency::periodicScheduler.loop();
     // axpDebugOutput.loop();
 
 #ifdef DEBUG_PORT
@@ -394,9 +367,6 @@ void loop()
 #ifndef NO_ESP32
     esp32Loop();
 #endif
-#ifdef TBEAM_V10
-    power->loop();
-#endif
 
 #ifdef BUTTON_PIN
     userButton.tick();

src/mesh/FloodingRouter.h

@@ -1,7 +1,6 @@
 #pragma once
 
 #include "PacketHistory.h"
-#include "../concurrency/PeriodicTask.h"
 #include "Router.h"
 
 /**

src/mesh/MeshService.cpp

@@ -56,7 +56,7 @@ static uint32_t sendOwnerCb()
     return getPref_send_owner_interval() * getPref_position_broadcast_secs() * 1000;
 }
 
-static concurrency::Periodic sendOwnerPeriod(sendOwnerCb);
+static concurrency::Periodic sendOwnerPeriod("SendOwner", sendOwnerCb);
 
 MeshService::MeshService() : toPhoneQueue(MAX_RX_TOPHONE)
 {
@@ -65,7 +65,6 @@ MeshService::MeshService() : toPhoneQueue(MAX_RX_TOPHONE)
 
 void MeshService::init()
 {
-    sendOwnerPeriod.setup();
     nodeDB.init();
 
     if (gps)
@@ -285,7 +284,8 @@ void MeshService::sendOurPosition(NodeNum dest, bool wantReplies)
     p->decoded.which_payload = SubPacket_position_tag;
     p->decoded.position = node->position;
     p->decoded.want_response = wantReplies;
-    p->decoded.position.time = getValidTime(RTCQualityGPS); // This nodedb timestamp might be stale, so update it if our clock is valid.
+    p->decoded.position.time =
+        getValidTime(RTCQualityGPS); // This nodedb timestamp might be stale, so update it if our clock is valid.
     sendToMesh(p);
 }
 

src/mesh/RadioInterface.cpp

@@ -91,7 +91,7 @@ void printPacket(const char *prefix, const MeshPacket *p)
     DEBUG_MSG(")\n");
 }
 
-RadioInterface::RadioInterface()
+RadioInterface::RadioInterface() : NotifiedWorkerThread("RadioIf")
 {
     assert(sizeof(PacketHeader) == 4 || sizeof(PacketHeader) == 16); // make sure the compiler did what we expected
 
@@ -121,9 +121,6 @@ bool RadioInterface::init()
     // radioIf.setThisAddress(nodeDB.getNodeNum()); // Note: we must do this here, because the nodenum isn't inited at constructor
     // time.
     
-    // we want this thread to run at very high priority, because it is effectively running as a user space ISR
-    start("radio", RADIO_STACK_SIZE, configMAX_PRIORITIES - 1); // Start our worker thread
-
     return true;
 }
 

src/mesh/RadioInterface.h

@@ -117,8 +117,6 @@ class RadioInterface : protected concurrency::NotifiedWorkerThread
      */
     size_t beginSending(MeshPacket *p);
 
-    virtual void loop() {} // Idle processing
-
     /**
      * Some regulatory regions limit xmit power.
      * This function should be called by subclasses after setting their desired power.  It might lower it

src/mesh/RadioLibInterface.cpp

@@ -19,7 +19,7 @@ void LockingModule::SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint
 
 RadioLibInterface::RadioLibInterface(RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst, RADIOLIB_PIN_TYPE busy,
                                      SPIClass &spi, PhysicalLayer *_iface)
-    : concurrency::PeriodicTask(0), module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
+    : module(cs, irq, rst, busy, spi, spiSettings), iface(_iface)
 {
     instance = this;
 }
@@ -41,7 +41,6 @@ void INTERRUPT_ATTR RadioLibInterface::isrLevel0Common(PendingISR cause)
 {
     instance->disableInterrupt();
 
-    instance->pending = cause;
     BaseType_t xHigherPriorityTaskWoken;
     instance->notifyFromISR(&xHigherPriorityTaskWoken, cause, eSetValueWithOverwrite);
 
@@ -191,10 +190,8 @@ transmitters that we are potentially stomping on.  Requires further thought.
 
 FIXME, the MIN_TX_WAIT_MSEC and MAX_TX_WAIT_MSEC values should be tuned via logic analyzer later.
 */
-void RadioLibInterface::loop()
+void RadioLibInterface::onNotify(uint32_t notification)
 {
-    pending = ISR_NONE;
-
     switch (notification) {
     case ISR_TX:
         handleTransmitInterrupt();
@@ -229,25 +226,15 @@ void RadioLibInterface::loop()
     }
 }
 
-void RadioLibInterface::doTask()
-{
-    disable(); // Don't call this callback again
-
-    // We use without overwrite, so that if there is already an interrupt pending to be handled, that gets handle properly (the
-    // ISR handler will restart our timer)
-
-    notify(TRANSMIT_DELAY_COMPLETED, eSetValueWithoutOverwrite);
-}
-
 void RadioLibInterface::startTransmitTimer(bool withDelay)
 {
     // If we have work to do and the timer wasn't already scheduled, schedule it now
-    if (getPeriod() == 0 && !txQueue.isEmpty()) {
+    if (!txQueue.isEmpty()) {
         uint32_t delay =
             !withDelay ? 1 : random(MIN_TX_WAIT_MSEC, MAX_TX_WAIT_MSEC); // See documentation for loop() wrt these values
                                                                          // DEBUG_MSG("xmit timer %d\n", delay);
-        // DEBUG_MSG("delaying %u\n", delay);
+        DEBUG_MSG("delaying %u\n", delay);
-        setPeriod(delay);
+        notifyLater(delay, TRANSMIT_DELAY_COMPLETED, false); // This will implicitly enable
     }
 }
 

src/mesh/RadioLibInterface.h

@@ -1,6 +1,6 @@
 #pragma once
 
-#include "../concurrency/PeriodicTask.h"
+#include "../concurrency/OSThread.h"
 #include "RadioInterface.h"
 
 #ifdef CubeCell_BoardPlus
@@ -59,13 +59,11 @@ class LockingModule : public Module
     virtual void SPItransfer(uint8_t cmd, uint8_t reg, uint8_t *dataOut, uint8_t *dataIn, uint8_t numBytes);
 };
 
-class RadioLibInterface : public RadioInterface, private concurrency::PeriodicTask
+class RadioLibInterface : public RadioInterface
 {
     /// Used as our notification from the ISR
     enum PendingISR { ISR_NONE = 0, ISR_RX, ISR_TX, TRANSMIT_DELAY_COMPLETED };
 
-    volatile PendingISR pending = ISR_NONE;
-
     /**
      * Raw ISR handler that just calls our polymorphic method
      */
@@ -155,7 +153,7 @@ class RadioLibInterface : public RadioInterface, private concurrency::PeriodicTa
 
     static void timerCallback(void *p1, uint32_t p2);
 
-    virtual void doTask();
+    virtual void onNotify(uint32_t notification);
 
     /** start an immediate transmit
      *  This method is virtual so subclasses can hook as needed, subclasses should not call directly
@@ -195,7 +193,5 @@ class RadioLibInterface : public RadioInterface, private concurrency::PeriodicTa
      */
     virtual void addReceiveMetadata(MeshPacket *mp) = 0;
 
-    virtual void loop(); // Idle processing
-
     virtual void setStandby() = 0;
 };

src/mesh/ReliableRouter.h

@@ -1,7 +1,6 @@
 #pragma once
 
 #include "FloodingRouter.h"
-#include "../concurrency/PeriodicTask.h"
 #include <unordered_map>
 
 /**
@@ -80,10 +79,10 @@ class ReliableRouter : public FloodingRouter
     virtual ErrorCode send(MeshPacket *p);
 
     /** Do our retransmission handling */
-    virtual void loop()
+    virtual uint32_t runOnce()
     {
         doRetransmissions();
-        FloodingRouter::loop();
+        return FloodingRouter::runOnce();
     }
 
   protected:

src/mesh/Router.cpp

@@ -34,7 +34,7 @@ Allocator<MeshPacket> &packetPool = staticPool;
  *
  * Currently we only allow one interface, that may change in the future
  */
-Router::Router() : fromRadioQueue(MAX_RX_FROMRADIO)
+Router::Router() : concurrency::OSThread("Router"), fromRadioQueue(MAX_RX_FROMRADIO)
 {
     // This is called pre main(), don't touch anything here, the following code is not safe
 
@@ -47,12 +47,14 @@ Router::Router() : fromRadioQueue(MAX_RX_FROMRADIO)
  * do idle processing
  * Mostly looking in our incoming rxPacket queue and calling handleReceived.
  */
-void Router::loop()
+uint32_t Router::runOnce()
 {
     MeshPacket *mp;
     while ((mp = fromRadioQueue.dequeuePtr(0)) != NULL) {
         perhapsHandleReceived(mp);
     }
+
+    return 0;
 }
 
 /// Generate a unique packet id

src/mesh/Router.h

@@ -5,12 +5,13 @@
 #include "Observer.h"
 #include "PointerQueue.h"
 #include "RadioInterface.h"
+#include "concurrency/OSThread.h"
 #include "mesh.pb.h"
 
 /**
  * A mesh aware router that supports multiple interfaces.
  */
-class Router
+class Router : protected concurrency::OSThread
 {
   private:
     RadioInterface *iface;
@@ -44,7 +45,7 @@ class Router
      * do idle processing
      * Mostly looking in our incoming rxPacket queue and calling handleReceived.
      */
-    virtual void loop();
+    virtual uint32_t runOnce();
 
     /**
      * Works like send, but if we are sending to the local node, we directly put the message in the receive queue

src/power.h

@@ -1,6 +1,6 @@
 #pragma once
 #include "PowerStatus.h"
-#include "concurrency/PeriodicTask.h"
+#include "concurrency/OSThread.h"
 
 /**
  * Per @spattinson
@@ -15,16 +15,17 @@
 #define BAT_MILLIVOLTS_FULL 4100
 #define BAT_MILLIVOLTS_EMPTY 3500
 
-class Power : public concurrency::PeriodicTask
+class Power : private concurrency::OSThread
 {
 
   public:
     Observable<const meshtastic::PowerStatus *> newStatus;
 
+    Power();
+
     void readPowerStatus();
-    void loop();
     virtual bool setup();
-    virtual void doTask();
+    virtual uint32_t runOnce();
     void setStatusHandler(meshtastic::PowerStatus *handler) { statusHandler = handler; }
 
   protected: