rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-08 02:47:35 +00:00
Code Issues Packages Projects Releases Wiki Activity

RAK11310 (#2299)

Browse Source 
* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* POC. Board definition JSON upcoming. Generic for now

* side-effect: RP2040 is building again.

* WIP Pico Targets

* current state of affairs

* ahem

* fmt

* update toolkit and fmt

* Add built in LED pin

* Use arduino pins

* init SPI bus on right pins.

* Use SPI1 and control chip select manually

* Use macro define for SPI selection. This needs to be defined in the ini file since portduino needs it inside the framework source

* Remove manual CS; works when not using setCS()

* Remove whoopsie debug line

* we are not ARDUINO_AVR_NANO_EVERY any more

* fix rp2040 compilation

* fix RadioLibHAL

* Use new arduino-pico core

* Use cortex-m0plus for BSEC2 library

* Forgot RAK11310 target for BSEC2 library

* That branch was merged

* RAK11310 is working too

---------

Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
Co-authored-by: GUVWAF <thijs@havinga.eu>
This commit is contained in:
Thomas Göttgens
2023-05-23 23:19:36 +02:00
committed by GitHub
parent 4f0922ec2b
commit 1dfa8f2d9e
13 changed files with 229 additions and 29 deletions
Download Patch File Download Diff File Expand all files Collapse all files

68
variants/rak11310/pins_arduino.h Normal file
View File

@@ -0,0 +1,68 @@
#pragma once
// Pin definitions taken from:
// https://datasheets.raspberrypi.org/pico/pico-datasheet.pdf
static const uint8_t WB_IO1 = 6; // SLOT_A SLOT_B
static const uint8_t WB_IO2 = 22; // SLOT_A SLOT_B
static const uint8_t WB_IO3 = 7; // SLOT_C
static const uint8_t WB_IO4 = 28; // SLOT_C
static const uint8_t WB_IO5 = 9; // SLOT_D
static const uint8_t WB_IO6 = 8; // SLOT_D
static const uint8_t WB_A0 = 26; // IO_SLOT
static const uint8_t WB_A1 = 27; // IO_SLOT
#define PIN_A0 (26u)
#define PIN_A1 (27u)
#define PIN_A2 (28u)
#define PIN_A3 (29u)
static const uint8_t A0 = PIN_A0;
static const uint8_t A1 = PIN_A1;
static const uint8_t A2 = PIN_A2;
static const uint8_t A3 = PIN_A3;
// LEDs
#define PIN_LED (23u)
#define PIN_LED1 PIN_LED
#define PIN_LED2 (24u)
#define LED_BUILTIN PIN_LED
#define ADC_RESOLUTION 12
// Serial
#define PIN_SERIAL1_TX (0ul)
#define PIN_SERIAL1_RX (1ul)
#define PIN_SERIAL2_TX (4ul)
#define PIN_SERIAL2_RX (5ul)
// SPI
#define PIN_SPI0_MISO (12u)
#define PIN_SPI0_MOSI (11u)
#define PIN_SPI0_SCK (10u)
#define PIN_SPI0_SS (13u)
#define PIN_SPI1_MISO (16u)
#define PIN_SPI1_MOSI (19u)
#define PIN_SPI1_SCK (18u)
#define PIN_SPI1_SS (17u)
// Wire
#define PIN_WIRE0_SDA (2u)
#define PIN_WIRE0_SCL (3u)
#define PIN_WIRE1_SDA (20u)
#define PIN_WIRE1_SCL (21u)
#define SERIAL_HOWMANY (3u)
#define SPI_HOWMANY (2u)
#define WIRE_HOWMANY (2u)
static const uint8_t SS = PIN_SPI0_SS;
static const uint8_t MOSI = PIN_SPI0_MOSI;
static const uint8_t MISO = PIN_SPI0_MISO;
static const uint8_t SCK = PIN_SPI0_SCK;
static const uint8_t SDA = PIN_WIRE0_SDA;
static const uint8_t SCL = PIN_WIRE0_SCL;

15
variants/rak11310/platformio.ini Normal file
View File

@@ -0,0 +1,15 @@
[env:rak11310]
extends = rp2040_base
board = wiscore_rak11300
board_level = extra
upload_protocol = picotool
# add our variants files to the include and src paths
build_flags = ${rp2040_base.build_flags}
-DPRIVATE_HW
-Ivariants/rak11310
-DDEBUG_RP2040_PORT=Serial
-DUSE_TINYUSB
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}

55
variants/rak11310/variant.h Normal file
View File

@@ -0,0 +1,55 @@
// #define RADIOLIB_CUSTOM_ARDUINO 1
// #define RADIOLIB_TONE_UNSUPPORTED 1
// #define RADIOLIB_SOFTWARE_SERIAL_UNSUPPORTED 1
#define ARDUINO_ARCH_AVR
#undef CBC
#define CBC 0
#undef CTR
#define CTR 1
#undef ECB
#define ECB 0
#undef GPS_SERIAL_NUM
#define LED_CONN PIN_LED2
#define BUTTON_PIN 9
#define BUTTON_NEED_PULLUP
// #define EXT_NOTIFY_OUT 4
#define BATTERY_PIN 26
// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
#define USE_SX1262
#undef RF95_SCK
#undef RF95_MISO
#undef RF95_MOSI
#undef RF95_NSS
// RAK BSP somehow uses SPI1 instead of SPI0
#define HW_SPI1_DEVICE
#define RF95_SCK PIN_SPI0_SCK
#define RF95_MOSI PIN_SPI0_MOSI
#define RF95_MISO PIN_SPI0_MISO
#define RF95_NSS PIN_SPI0_SS
#define LORA_DIO0 RADIOLIB_NC
#define LORA_RESET 14
#define LORA_DIO1 29
#define LORA_DIO2 15
#define LORA_DIO3 RADIOLIB_NC
#ifdef USE_SX1262
#define SX126X_CS RF95_NSS
#define SX126X_DIO1 LORA_DIO1
#define SX126X_BUSY LORA_DIO2
#define SX126X_RESET LORA_RESET
#define SX126X_POWER_EN 25
#define SX126X_E22 // DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
#endif
#include <Adafruit_TinyUSB.h>

6
variants/rpipico/platformio.ini
View File

@@ -8,11 +8,9 @@ upload_protocol = picotool
build_flags = ${rp2040_base.build_flags}
-DPRIVATE_HW
-Ivariants/rpipico
-DARDUINO_AVR_NANO_EVERY
-DDEBUG_RP2040_WIRE
-DDEBUG_RP2040_SPI
-DDEBUG_RP2040_CORE
-DDEBUG_RP2040_PORT=Serial
-DUSE_TINYUSB
-DHW_SPI1_DEVICE
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}

6
variants/rpipico/variant.h
View File

@@ -4,8 +4,11 @@
#define ARDUINO_ARCH_AVR
#undef CBC
#define CBC 0
#undef CTR
#define CTR 1
#undef ECB
#define ECB 0
#define NO_GPS 1
@@ -18,11 +21,12 @@
#define BUTTON_PIN 17
#define EXT_NOTIFY_OUT 4
#define LED_PIN PIN_LED
#define BATTERY_PIN 26
// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
#define USE_RF95
#define USE_SX1262
#undef RF95_SCK

6
variants/rpipicow/platformio.ini
View File

@@ -8,11 +8,9 @@ upload_protocol = picotool
build_flags = ${rp2040_base.build_flags}
-DPRIVATE_HW
-Ivariants/rpipicow
-DARDUINO_AVR_NANO_EVERY
-DDEBUG_RP2040_WIRE
-DDEBUG_RP2040_SPI
-DDEBUG_RP2040_CORE
-DDEBUG_RP2040_PORT=Serial
-DUSE_TINYUSB
-DHW_SPI1_DEVICE
-L "${platformio.libdeps_dir}/${this.__env__}/BSEC2 Software Library/src/cortex-m0plus"
lib_deps =
${rp2040_base.lib_deps}

4
variants/rpipicow/variant.h
View File

@@ -4,8 +4,11 @@
#define ARDUINO_ARCH_AVR
#undef CBC
#define CBC 0
#undef CTR
#define CTR 1
#undef ECB
#define ECB 0
#define NO_GPS 1
@@ -22,7 +25,6 @@
// ratio of voltage divider = 3.0 (R17=200k, R18=100k)
#define ADC_MULTIPLIER 3.1 // 3.0 + a bit for being optimistic
#define USE_RF95
#define USE_SX1262
#undef RF95_SCK