fix lora, add v1/v2 variant targets

variants/esp32s3/t5s3_epaper/variant.h

@@ -1,12 +1,24 @@
 
-// TODO: Display (E-Ink)
-#define PIN_EINK_EN 11 // BL
-#define PIN_EINK_CS 11
-#define PIN_EINK_BUSY -1
-#define PIN_EINK_DC 21
-#define PIN_EINK_RES -1
-#define PIN_EINK_SCLK 14
-#define PIN_EINK_MOSI 13 // SDI
+// Display (E-Ink) ED047TC1
+#define USE_EPD
+#define BOARD_BL_EN 11
+#define EP_I2C_PORT I2C_NUM_0
+#define EP_SCL (40)
+#define EP_SDA (39)
+#define EP_INTR (38)
+#define EP_D7 (8)
+#define EP_D6 (18)
+#define EP_D5 (17)
+#define EP_D4 (16)
+#define EP_D3 (15)
+#define EP_D2 (7)
+#define EP_D1 (6)
+#define EP_D0 (5)
+#define EP_CKV (48)
+#define EP_STH (41)
+#define EP_LEH (42)
+#define EP_STV (45)
+#define EP_CKH (4)
 
 #define EPD_WIDTH 960
 #define EPD_HEIGHT 540
@@ -17,17 +29,17 @@
 #define HAS_TOUCHSCREEN 1
 #define GT911_PIN_SDA 39
 #define GT911_PIN_SCL 40
-#define GT911_PIN_INT 15
-#define GT911_PIN_RST 41
+#define GT911_PIN_INT 3
+#define GT911_PIN_RST 9
 
 #define PCF85063_RTC 0x51
 #define HAS_RTC 1
+#define PCF85063_INT 2
 
 #define USE_POWERSAVE
 #define SLEEP_TIME 120
 
-// optional GPS
-#define GPS_DEFAULT_NOT_PRESENT 1
+// GPS
 #define GPS_RX_PIN 44
 #define GPS_TX_PIN 43
 
@@ -52,13 +64,27 @@
 
 // TPS651851
 
+// PCA9535 IO extender
+#define USE_XL9555
+#define PCA9535_ADDR 0x20
+#define PCA9535_INT 38
+#define PCA9535_IO00_LORA_EN 00
+#define PCA9535_IO10_EP_OE 10   // EP Output enable source driver
+#define PCA9535_IO11_EP_MODE 11 // EP Output mode selection gate driver
+#define PCA9535_IO12_BUTTON 12
+#define PCA9535_IO13_TPS_PWRUP 13
+#define PCA9535_IO14_VCOM_CTRL 14
+#define PCA9535_IO15_TPS_WAKEUP 15
+#define PCA9535_IO16_TPS_PWR_GOOD 16
+#define PCA9535_IO17_TPS_INT 17
+
 // LoRa
 #define USE_SX1262
 #define USE_SX1268
 
-#define LORA_SCK 18
-#define LORA_MISO 8
-#define LORA_MOSI 17
+#define LORA_SCK 14  // 18
+#define LORA_MISO 21 // 8
+#define LORA_MOSI 13 // 17
 #define LORA_CS 46
 
 #define LORA_DIO0 -1
@@ -73,3 +99,41 @@
 #define SX126X_RESET LORA_RESET
 #define SX126X_DIO2_AS_RF_SWITCH
 #define SX126X_DIO3_TCXO_VOLTAGE 2.4
+
+/* V1
+
+#define BOARD_SCL         (5)
+#define BOARD_SDA         (6)
+
+#define BOARD_SPI_MISO    (8)
+#define BOARD_SPI_MOSI    (17)
+#define BOARD_SPI_SCLK    (18)
+
+#define BOARD_SD_MISO    (BOARD_SPI_MISO)
+#define BOARD_SD_MOSI    (BOARD_SPI_MOSI)
+#define BOARD_SD_SCLK    (BOARD_SPI_SCLK)
+#define BOARD_SD_CS      (16)
+
+#define BOARD_LORA_MISO   (BOARD_SPI_MISO)
+#define BOARD_LORA_MOSI   (BOARD_SPI_MOSI)
+#define BOARD_LORA_SCLK   (BOARD_SPI_SCLK)
+#define BOARD_LORA_CS     (46)
+#define BOARD_LORA_IRQ    (3)
+#define BOARD_LORA_RST    (43)
+#define BOARD_LORA_BUSY   (44)
+
+#define BOARD_TOUCH_SCL   (BOARD_SCL)
+#define BOARD_TOUCH_SDA   (BOARD_SDA)
+#define BOARD_TOUCH_INT   (15)
+#define BOARD_TOUCH_RST   (41)
+
+#define BOARD_RTC_INT     7
+#define BOARD_RT_SCL      (BOARD_SCL)
+#define BOARD_RT_SDA      (BOARD_SDA)
+
+#define BOARD_BL_EN       (40)
+#define BOARD_BATT_PIN    (4)
+#define BOARD_BOOT_BTN    (0)
+#define BOARD_KEY_BTN     (48)
+
+*/