Merge remote-tracking branch 'origin/master' into 2.6

2026-01-08 19:07:26 +00:00 · 2025-02-19 18:17:30 -06:00
parent 1961bcaf9d f1dc1b309a
commit 1a92b7881f
27 changed files with 156 additions and 71 deletions
--- a/variants/Dongle_nRF52840-pca10059-v1/platformio.ini
+++ b/variants/Dongle_nRF52840-pca10059-v1/platformio.ini
@@ -10,5 +10,5 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/Dongle_nRF52840-pca10059-v
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/Dongle_nRF52840-pca10059-v1>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
-debug_tool = jlink
+  zinggjm/GxEPD2@^1.6.2
+debug_tool = jlink
--- a/variants/ME25LS01-4Y10TD_e-ink/platformio.ini
+++ b/variants/ME25LS01-4Y10TD_e-ink/platformio.ini
@@ -13,7 +13,7 @@ board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/ME25LS01-4Y10TD_e-ink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.8
+  zinggjm/GxEPD2@^1.6.2
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 upload_protocol = nrfutil
-upload_port = /dev/ttyACM1
+upload_port = /dev/ttyACM1
--- a/variants/MakePython_nRF52840_eink/platformio.ini
+++ b/variants/MakePython_nRF52840_eink/platformio.ini
@@ -5,13 +5,13 @@ board = nordic_pca10059
 build_flags = ${nrf52840_base.build_flags} -Ivariants/MakePython_nRF52840_eink -D PRIVATE_HW
  -L "${platformio.libdeps_dir}/${this.__env__}/bsec2/src/cortex-m4/fpv4-sp-d16-hard"
  -D PIN_EINK_EN
+  -DEINK_DISPLAY_MODEL=GxEPD2_290_T5D
+  -DEINK_WIDTH=296
+  -DEINK_HEIGHT=128
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/MakePython_nRF52840_eink>
 lib_deps = 
  ${nrf52840_base.lib_deps}
  https://github.com/meshtastic/ESP32_Codec2.git#633326c78ac251c059ab3a8c430fcdf25b41672f
-  zinggjm/GxEPD2@^1.4.9
-  -DEINK_DISPLAY_MODEL=GxEPD2_290_T5D
-  -DEINK_WIDTH=296
-  -DEINK_HEIGHT=128
+  zinggjm/GxEPD2@^1.6.2
 debug_tool = jlink
-;upload_port = /dev/ttyACM4
+;upload_port = /dev/ttyACM4
--- a/variants/TWC_mesh_v4/platformio.ini
+++ b/variants/TWC_mesh_v4/platformio.ini
@@ -6,5 +6,5 @@ build_flags = ${nrf52840_base.build_flags} -I variants/TWC_mesh_v4 -D TWC_mesh_v
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/TWC_mesh_v4>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
-debug_tool = jlink
+  zinggjm/GxEPD2@^1.6.2
+debug_tool = jlink
--- a/variants/esp32-s3-pico/platformio.ini
+++ b/variants/esp32-s3-pico/platformio.ini
@@ -21,5 +21,5 @@ build_flags = ${esp32s3_base.build_flags}
  -DEINK_HEIGHT=128

 lib_deps = ${esp32s3_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.3
+  zinggjm/GxEPD2@^1.6.2
  adafruit/Adafruit NeoPixel @ ^1.12.0
--- a/variants/icarus/platformio.ini
+++ b/variants/icarus/platformio.ini
@@ -6,7 +6,7 @@ board_check = true
 board_build.mcu = esp32s3
 upload_protocol = esptool
 upload_speed = 921600
-platform_packages = framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
+platform_packages = platformio/framework-arduinoespressif32@https://github.com/PowerFeather/powerfeather-meshtastic-arduino-lib/releases/download/2.0.16a/esp32-2.0.16.zip
 lib_deps =
  ${esp32s3_base.lib_deps}
 build_unflags =
@@ -16,4 +16,4 @@ build_flags =
  ${esp32s3_base.build_flags} -D PRIVATE_HW -I variants/icarus
  -DBOARD_HAS_PSRAM 

-  -DARDUINO_USB_MODE=0
+  -DARDUINO_USB_MODE=0
--- a/variants/m5stack_coreink/platformio.ini
+++ b/variants/m5stack_coreink/platformio.ini
@@ -17,11 +17,11 @@ build_flags =
  -DM5STACK
 lib_deps = 
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.3
+  zinggjm/GxEPD2@^1.6.2
  lewisxhe/PCF8563_Library@^1.0.1
 lib_ignore =
  m5stack-coreink
 monitor_filters = esp32_exception_decoder
 board_build.f_cpu = 240000000L
 upload_protocol = esptool
-upload_port = /dev/ttyACM0
+upload_port = /dev/ttyACM0
--- a/variants/my_esp32s3_diy_eink/platformio.ini
+++ b/variants/my_esp32s3_diy_eink/platformio.ini
@@ -9,10 +9,10 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM1
 upload_speed = 921600
 platform_packages =
-  tool-esptoolpy@^1.40500.0
+  platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
  ${esp32_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.1
+  zinggjm/GxEPD2@^1.6.2
  adafruit/Adafruit NeoPixel @ ^1.12.0
 build_unflags =
  ${esp32s3_base.build_unflags}
--- a/variants/my_esp32s3_diy_oled/platformio.ini
+++ b/variants/my_esp32s3_diy_oled/platformio.ini
@@ -9,7 +9,7 @@ upload_protocol = esptool
 ;upload_port = /dev/ttyACM0
 upload_speed = 921600
 platform_packages =
-  tool-esptoolpy@^1.40500.0
+  platformio/tool-esptoolpy@^1.40801.0
 lib_deps =
  ${esp32_base.lib_deps}
  adafruit/Adafruit NeoPixel @ ^1.12.0
--- a/variants/rak11310/platformio.ini
+++ b/variants/rak11310/platformio.ini
@@ -18,4 +18,4 @@ lib_deps =
  ${networking_base.lib_deps}
  https://github.com/RAKWireless/RAK13800-W5100S.git#1.0.2
 debug_build_flags = ${rp2040_base.build_flags}, -g
-debug_tool = cmsis-dap ; for e.g. Picotool
+debug_tool = cmsis-dap ; for e.g. Picotool
--- a/variants/rak4631_epaper/platformio.ini
+++ b/variants/rak4631_epaper/platformio.ini
@@ -13,10 +13,10 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_epaper -D RAK_4631
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_epaper>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.4.9
+  zinggjm/GxEPD2@^1.6.2
  melopero/Melopero RV3028@^1.1.0
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
-;upload_protocol = jlink
+;upload_protocol = jlink
--- a/variants/rak4631_epaper_onrxtx/platformio.ini
+++ b/variants/rak4631_epaper_onrxtx/platformio.ini
@@ -15,11 +15,11 @@ build_flags = ${nrf52840_base.build_flags} -Ivariants/rak4631_epaper -D RAK_4631
 build_src_filter = ${nrf52_base.build_src_filter} +<../variants/rak4631_epaper_onrxtx>
 lib_deps = 
  ${nrf52840_base.lib_deps}
-  zinggjm/GxEPD2@^1.5.1
+  zinggjm/GxEPD2@^1.6.2
  melopero/Melopero RV3028@^1.1.0
  rakwireless/RAKwireless NCP5623 RGB LED library@^1.0.2
  beegee-tokyo/RAKwireless RAK12034@^1.0.0
 debug_tool = jlink
 ; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
 ;upload_protocol = jlink
-;upload_port = /dev/ttyACM3
+;upload_port = /dev/ttyACM3
--- a/variants/seeed_xiao_s3/variant.h
+++ b/variants/seeed_xiao_s3/variant.h
@@ -36,6 +36,10 @@ L76K GPS Module Information : https://www.seeedstudio.com/L76K-GNSS-Module-for-S
 #define BUTTON_PIN 21 // This is the Program Button
 #define BUTTON_NEED_PULLUP

+#define BATTERY_PIN -1
+#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+
 /*Warning:
    https://www.seeedstudio.com/L76K-GNSS-Module-for-Seeed-Studio-XIAO-p-5864.html
    L76K Expansion Board can not directly used, L76K Reset Pin needs to override or physically remove it,
--- a/variants/trackerd/platformio.ini
+++ b/variants/trackerd/platformio.ini
@@ -1,13 +1,8 @@
 [env:trackerd]
 extends = esp32_base
-;platform = https://github.com/platformio/platform-espressif32.git#feature/arduino-upstream
-platform = espressif32
 board = pico32
 board_build.f_flash = 80000000L

 build_flags = 
  ${esp32_base.build_flags} -D PRIVATE_HW -I variants/trackerd -D BSFILE=\"boards/dragino_lbt2.h\"
-;board_build.partitions = no_ota.csv
-;platform_packages =
-;   platformio/framework-arduinoespressif32@3
-;platformio/framework-arduinoespressif32 @ https://github.com/espressif/arduino-esp32.git#2.0.1-RC1
+;board_build.partitions = no_ota.csv