no more t-rex

variants/nrf52840/r1-neo/variant.h

@@ -0,0 +1,149 @@
+/*
+  Copyright (c) 2014-2015 Arduino LLC.  All right reserved.
+  Copyright (c) 2016 Sandeep Mistry All right reserved.
+  Copyright (c) 2018, Adafruit Industries (adafruit.com)
+
+  This library is free software; you can redistribute it and/or
+  modify it under the terms of the GNU Lesser General Public
+  License as published by the Free Software Foundation; either
+  version 2.1 of the License, or (at your option) any later version.
+  This library is distributed in the hope that it will be useful,
+  but WITHOUT ANY WARRANTY; without even the implied warranty of
+  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+  See the GNU Lesser General Public License for more details.
+  You should have received a copy of the GNU Lesser General Public
+  License along with this library; if not, write to the Free Software
+  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
+*/
+
+#ifndef _VARIANT_R1NEO_
+#define _VARIANT_R1NEO_
+
+#define RAK4630
+
+/** Master clock frequency */
+#define VARIANT_MCK (64000000ul)
+
+#define USE_LFXO // Board uses 32khz crystal for LF
+// define USE_LFRC    // Board uses RC for LF
+
+/*----------------------------------------------------------------------------
+ *        Headers
+ *----------------------------------------------------------------------------*/
+
+#include "WVariant.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif // __cplusplus
+
+// Number of pins defined in PinDescription array
+#define PINS_COUNT (48)
+#define NUM_DIGITAL_PINS (48)
+#define NUM_ANALOG_INPUTS (1)
+#define NUM_ANALOG_OUTPUTS (0)
+
+// LEDs
+#define PIN_LED1 (32 + 4) // P1.04 Controls Green LED
+#define PIN_LED2 (28)     // P0.28 Controls Blue LED
+
+#define LED_BUILTIN PIN_LED1
+#define LED_CONN PIN_LED2
+
+#define LED_GREEN PIN_LED1
+#define LED_BLUE PIN_LED2
+
+#define LED_STATE_ON 1 // State when LED is litted
+
+// Button
+#define PIN_BUTTON1 (26)
+#define BUTTON_ACTIVE_LOW 0
+#define BUTTON_ACTIVE_PULLUP 0
+#define BUTTON_SENSE_TYPE INPUT_SENSE_HIGH
+
+#define ADC_RESOLUTION 14
+
+// Serial for GPS
+#define PIN_SERIAL1_RX (25)
+#define PIN_SERIAL1_TX (24)
+
+// Connected to Jlink CDC
+#define PIN_SERIAL2_RX (8)
+#define PIN_SERIAL2_TX (6)
+
+/*
+ * SPI Interfaces
+ */
+#define SPI_INTERFACES_COUNT 1
+
+#define PIN_SPI_MISO (45)
+#define PIN_SPI_MOSI (44)
+#define PIN_SPI_SCK (43)
+
+static const uint8_t SS = 42;
+static const uint8_t MOSI = PIN_SPI_MOSI;
+static const uint8_t MISO = PIN_SPI_MISO;
+static const uint8_t SCK = PIN_SPI_SCK;
+
+// R1 Neo Extras
+#define DCDC_EN_HOLD (13) // P0.13 Keeps DCDC alive after user button  is pressed
+#define NRF_ON (29)       // P0.29 Tells IO controller device is on
+
+// RAKRGB
+#define HAS_NCP5623
+
+#define HAS_SCREEN 0
+
+/*
+ * Wire Interfaces
+ */
+#define WIRE_INTERFACES_COUNT 1
+
+#define PIN_WIRE_SDA (19) // P0.19 RTC_SDA
+#define PIN_WIRE_SCL (20) // P0.20 RTC_SCL
+
+#define PIN_BUZZER (0 + 3) // P0.03
+
+#define USE_SX1262
+#define SX126X_CS (42)
+#define SX126X_DIO1 (47)
+#define SX126X_BUSY (46)
+#define SX126X_RESET (38)
+#define SX126X_POWER_EN (37)
+
+// DIO2 controlls an antenna switch and the TCXO voltage is controlled by DIO3
+#define SX126X_DIO2_AS_RF_SWITCH
+#define SX126X_DIO3_TCXO_VOLTAGE 1.8
+
+// Testing USB detection
+#define NRF_APM
+
+#define PIN_GPS_EN (32 + 1) // P1.01
+#define PIN_GPS_PPS (2)     // P0.02 Pulse per second input from the GPS
+
+#define GPS_RX_PIN PIN_SERIAL1_RX
+#define GPS_TX_PIN PIN_SERIAL1_TX
+
+// Battery
+#define BATTERY_PIN (0 + 31) // P0.31 ADC_VBAT
+// and has 12 bit resolution
+#define BATTERY_SENSE_RESOLUTION_BITS 12
+#define BATTERY_SENSE_RESOLUTION 4096.0
+#undef AREF_VOLTAGE
+#define AREF_VOLTAGE 3.0
+#define VBAT_AR_INTERNAL AR_INTERNAL_3_0
+#define ADC_MULTIPLIER 1.73
+
+#define HAS_RTC 1
+
+#define RX8130CE_RTC 0x32
+
+#ifdef __cplusplus
+}
+#endif
+
+/*----------------------------------------------------------------------------
+ *        Arduino objects - C++ only
+ *----------------------------------------------------------------------------*/
+
+#endif