rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-21 02:02:23 +00:00
Code Issues Packages Projects Releases Wiki Activity

Use common power amp definition for Heltec v4 and Heltec Tracker v2

Browse Source
This commit is contained in:
Tom Fifield
2025-09-30 08:30:18 +10:00
parent 8d323a1cf1
commit 0f6131d2c8
5 changed files with 10 additions and 9 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
src/configuration.h
View File

@@ -117,7 +117,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SX126X_MAX_POWER 22
#endif
#ifdef HELTEC_V4
#ifdef USE_GC1109_PA
// Power Amps are often non-linear, so we can use an array of values for the power curve
#define NUM_PA_POINTS 22
#define TX_GAIN_LORA 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 11, 10, 10, 9, 9, 8, 7

6
src/mesh/SX126xInterface.cpp
View File

@@ -52,7 +52,7 @@ template <typename T> bool SX126xInterface<T>::init()
pinMode(SX126X_POWER_EN, OUTPUT);
#endif
#if defined(HELTEC_V4)||defined(HELTEC_WIRELESS_TRACKER_V2)
#if defined(USE_GC1109_PA)
pinMode(LORA_PA_POWER, OUTPUT);
digitalWrite(LORA_PA_POWER, HIGH);
@@ -352,7 +352,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
digitalWrite(SX126X_POWER_EN, LOW);
#endif
#if defined(HELTEC_V4)||defined(HELTEC_WIRELESS_TRACKER_V2)
#if defined(USE_GC1109_PA)
/*
* Do not switch the power on and off frequently.
* After turning off LORA_PA_EN, the power consumption has dropped to the uA level.
@@ -367,7 +367,7 @@ template <typename T> bool SX126xInterface<T>::sleep()
/** Some boards require GPIO control of tx vs rx paths */
template <typename T> void SX126xInterface<T>::setTransmitEnable(bool txon)
{
#if defined(HELTEC_V4)||defined(HELTEC_WIRELESS_TRACKER_V2)
#if defined(USE_GC1109_PA)
digitalWrite(LORA_PA_POWER, HIGH);
digitalWrite(LORA_PA_EN, HIGH);
digitalWrite(LORA_PA_TX_EN, txon ? 1 : 0);

2
src/sleep.cpp
View File

@@ -554,7 +554,7 @@ void enableLoraInterrupt()
gpio_pullup_en((gpio_num_t)LORA_CS);
#endif
#if defined(HELTEC_V4)||defined(HELTEC_WIRELESS_TRACKER_V2)
#if defined(USE_GC1109_PA)
gpio_pullup_en((gpio_num_t)LORA_PA_POWER);
gpio_pullup_en((gpio_num_t)LORA_PA_EN);
gpio_pulldown_en((gpio_num_t)LORA_PA_TX_EN);

1
variants/esp32s3/heltec_v4/variant.h
View File

@@ -37,6 +37,7 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 2
#define LORA_PA_TX_EN 46 // enable tx

8
variants/esp32s3/heltec_wireless_tracker_v2/variant.h
View File

@@ -15,7 +15,7 @@
#define ST7735_RESET 39
#define ST7735_MISO -1
#define ST7735_BUSY -1
#define TFT_BL 21
#define TFT_BL 21
#define ST7735_SPI_HOST SPI3_HOST
#define SPI_FREQUENCY 40000000
#define SPI_READ_FREQUENCY 16000000
@@ -28,7 +28,6 @@
#define SCREEN_TRANSITION_FRAMERATE 3 // fps
#define DISPLAY_FORCE_SMALL_FONTS
#define VEXT_ENABLE 3 // active HIGH - powers the GPS, GPS LNA and OLED
#define VEXT_ON_VALUE HIGH
#define BUTTON_PIN 0
@@ -37,7 +36,7 @@
#define ADC_CHANNEL ADC1_GPIO1_CHANNEL
#define ADC_ATTENUATION ADC_ATTEN_DB_2_5 // lower dB for high resistance voltage divider
#define ADC_MULTIPLIER 4.9 * 1.045
#define ADC_CTRL 2 // active HIGH, powers the voltage divider.
#define ADC_CTRL 2 // active HIGH, powers the voltage divider.
#define ADC_USE_PULLUP // Use internal pullup/pulldown instead of actively driving the output
#undef GPS_RX_PIN
@@ -73,6 +72,7 @@
#define SX126X_DIO2_AS_RF_SWITCH
#define SX126X_DIO3_TCXO_VOLTAGE 1.8
#define USE_GC1109_PA // We have a GC1109 power amplifier+attenuator
#define LORA_PA_POWER 7 // power en
#define LORA_PA_EN 4
#define LORA_PA_EN 4
#define LORA_PA_TX_EN 46 // enable tx