add a .clang-format file (#9154)

src/platform/extra_variants/heltec_wireless_tracker/variant.cpp

@@ -7,34 +7,33 @@
 #include "graphics/TFTDisplay.h"
 
 // Heltec tracker specific init
-void lateInitVariant()
-{
-    // LOG_DEBUG("Heltec tracker initVariant");
+void lateInitVariant() {
+  // LOG_DEBUG("Heltec tracker initVariant");
 
 #ifndef MESHTASTIC_EXCLUDE_GPS
-    GpioVirtPin *virtGpsEnable = gps ? gps->enablePin : new GpioVirtPin();
+  GpioVirtPin *virtGpsEnable = gps ? gps->enablePin : new GpioVirtPin();
 #else
-    GpioVirtPin *virtGpsEnable = new GpioVirtPin();
+  GpioVirtPin *virtGpsEnable = new GpioVirtPin();
 #endif
 
 #ifndef MESHTASTIC_EXCLUDE_SCREEN
-    // On this board we are actually using the backlightEnable signal to already be controlling a physical enable to the
-    // display controller.  But we'd _ALSO_ like to have that signal drive a virtual GPIO.  So nest it as needed.
-    GpioVirtPin *virtScreenEnable = new GpioVirtPin();
-    if (TFTDisplay::backlightEnable) {
-        GpioPin *physScreenEnable = TFTDisplay::backlightEnable;
-        GpioPin *splitter = new GpioSplitter(virtScreenEnable, physScreenEnable);
-        TFTDisplay::backlightEnable = splitter;
+  // On this board we are actually using the backlightEnable signal to already be controlling a physical enable to the
+  // display controller.  But we'd _ALSO_ like to have that signal drive a virtual GPIO.  So nest it as needed.
+  GpioVirtPin *virtScreenEnable = new GpioVirtPin();
+  if (TFTDisplay::backlightEnable) {
+    GpioPin *physScreenEnable = TFTDisplay::backlightEnable;
+    GpioPin *splitter = new GpioSplitter(virtScreenEnable, physScreenEnable);
+    TFTDisplay::backlightEnable = splitter;
 
-        // Assume screen is initially powered
-        splitter->set(true);
-    }
+    // Assume screen is initially powered
+    splitter->set(true);
+  }
 #endif
 
 #if defined(VEXT_ENABLE) && (!defined(MESHTASTIC_EXCLUDE_GPS) || !defined(MESHTASTIC_EXCLUDE_SCREEN))
-    // If either the GPS or the screen is on, turn on the external power regulator
-    GpioPin *hwEnable = new GpioHwPin(VEXT_ENABLE);
-    new GpioBinaryTransformer(virtGpsEnable, virtScreenEnable, hwEnable, GpioBinaryTransformer::Or);
+  // If either the GPS or the screen is on, turn on the external power regulator
+  GpioPin *hwEnable = new GpioHwPin(VEXT_ENABLE);
+  new GpioBinaryTransformer(virtGpsEnable, virtScreenEnable, hwEnable, GpioBinaryTransformer::Or);
 #endif
 }
 

src/platform/extra_variants/t_deck_pro/variant.cpp

@@ -8,21 +8,19 @@
 
 CSE_CST328 tsPanel = CSE_CST328(EINK_WIDTH, EINK_HEIGHT, &Wire, CST328_PIN_RST, CST328_PIN_INT);
 
-bool readTouch(int16_t *x, int16_t *y)
-{
-    if (tsPanel.getTouches()) {
-        *x = tsPanel.getPoint(0).x;
-        *y = tsPanel.getPoint(0).y;
-        return true;
-    }
-    return false;
+bool readTouch(int16_t *x, int16_t *y) {
+  if (tsPanel.getTouches()) {
+    *x = tsPanel.getPoint(0).x;
+    *y = tsPanel.getPoint(0).y;
+    return true;
+  }
+  return false;
 }
 
 // T-Deck Pro specific init
-void lateInitVariant()
-{
-    tsPanel.begin();
-    touchScreenImpl1 = new TouchScreenImpl1(EINK_WIDTH, EINK_HEIGHT, readTouch);
-    touchScreenImpl1->init();
+void lateInitVariant() {
+  tsPanel.begin();
+  touchScreenImpl1 = new TouchScreenImpl1(EINK_WIDTH, EINK_HEIGHT, readTouch);
+  touchScreenImpl1->init();
 }
 #endif

src/platform/extra_variants/t_lora_pager/variant.cpp

@@ -8,20 +8,19 @@ DriverPins PinsAudioBoardES8311;
 AudioBoard board(AudioDriverES8311, PinsAudioBoardES8311);
 
 // TLora Pager specific init
-void lateInitVariant()
-{
-    // AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
-    // I2C: function, scl, sda
-    PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
-    // I2S: function, mclk, bck, ws, data_out, data_in
-    PinsAudioBoardES8311.addI2S(PinFunction::CODEC, DAC_I2S_MCLK, DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_DIN);
+void lateInitVariant() {
+  // AudioDriverLogger.begin(Serial, AudioDriverLogLevel::Debug);
+  // I2C: function, scl, sda
+  PinsAudioBoardES8311.addI2C(PinFunction::CODEC, Wire);
+  // I2S: function, mclk, bck, ws, data_out, data_in
+  PinsAudioBoardES8311.addI2S(PinFunction::CODEC, DAC_I2S_MCLK, DAC_I2S_BCK, DAC_I2S_WS, DAC_I2S_DOUT, DAC_I2S_DIN);
 
-    // configure codec
-    CodecConfig cfg;
-    cfg.input_device = ADC_INPUT_LINE1;
-    cfg.output_device = DAC_OUTPUT_ALL;
-    cfg.i2s.bits = BIT_LENGTH_16BITS;
-    cfg.i2s.rate = RATE_44K;
-    board.begin(cfg);
+  // configure codec
+  CodecConfig cfg;
+  cfg.input_device = ADC_INPUT_LINE1;
+  cfg.output_device = DAC_OUTPUT_ALL;
+  cfg.i2s.bits = BIT_LENGTH_16BITS;
+  cfg.i2s.rate = RATE_44K;
+  board.begin(cfg);
 }
 #endif

src/platform/extra_variants/tbeam_displayshield/variant.cpp

@@ -10,34 +10,32 @@ TouchDrvCSTXXX tsPanel;
 static constexpr uint8_t PossibleAddresses[2] = {CST328_ADDR, CST226SE_ADDR_ALT};
 uint8_t i2cAddress = 0;
 
-bool readTouch(int16_t *x, int16_t *y)
-{
-    int16_t x_array[1], y_array[1];
-    uint8_t touched = tsPanel.getPoint(x_array, y_array, 1);
-    if (touched > 0) {
-        *y = x_array[0];
-        *x = (TFT_WIDTH - y_array[0]);
-        // Check bounds
-        if (*x < 0 || *x >= TFT_WIDTH || *y < 0 || *y >= TFT_HEIGHT) {
-            return false;
-        }
-        return true; // Valid touch detected
+bool readTouch(int16_t *x, int16_t *y) {
+  int16_t x_array[1], y_array[1];
+  uint8_t touched = tsPanel.getPoint(x_array, y_array, 1);
+  if (touched > 0) {
+    *y = x_array[0];
+    *x = (TFT_WIDTH - y_array[0]);
+    // Check bounds
+    if (*x < 0 || *x >= TFT_WIDTH || *y < 0 || *y >= TFT_HEIGHT) {
+      return false;
     }
-    return false; // No valid touch data
+    return true; // Valid touch detected
+  }
+  return false; // No valid touch data
 }
 
-void lateInitVariant()
-{
-    tsPanel.setTouchDrvModel(TouchDrv_CST226);
-    for (uint8_t addr : PossibleAddresses) {
-        if (tsPanel.begin(Wire, addr, I2C_SDA, I2C_SCL)) {
-            i2cAddress = addr;
-            LOG_DEBUG("CST226SE init OK at address 0x%02X", addr);
-            touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
-            touchScreenImpl1->init();
-            return;
-        }
+void lateInitVariant() {
+  tsPanel.setTouchDrvModel(TouchDrv_CST226);
+  for (uint8_t addr : PossibleAddresses) {
+    if (tsPanel.begin(Wire, addr, I2C_SDA, I2C_SCL)) {
+      i2cAddress = addr;
+      LOG_DEBUG("CST226SE init OK at address 0x%02X", addr);
+      touchScreenImpl1 = new TouchScreenImpl1(TFT_WIDTH, TFT_HEIGHT, readTouch);
+      touchScreenImpl1->init();
+      return;
     }
-    LOG_ERROR("CST226SE init failed at all known addresses");
+  }
+  LOG_ERROR("CST226SE init failed at all known addresses");
 }
 #endif