rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2026-01-06 18:08:00 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
4e30795c6b5023e7294b1958e5cd9baddd68edda
firmware/variants/esp32/tbeam/platformio.ini

27 lines
705 B
INI
Raw Normal View History

Split platformio.ini into one file for each board, only leaving platform definitions and a handful of stale (?) boards around.. (#1141)
2022-01-25 15:56:16 +01:00
; The 1.0 release of the TBEAM board
[env:tbeam]
extends = esp32_base
board = ttgo-t-beam
More board_level extras
2025-12-11 06:23:08 -06:00
board_level = extra
Generate the build matrix from the variant files (#3870)
2024-05-12 22:43:47 +02:00
board_check = true
adding support for the ST7796 + creating a new variant of the T-beam (#6575) * remove duplicate HAS_LP5562 introduced by #6422 * add ST7796 * changes to get display centered+lib update * seperated from tbeam * forgot the simple scan case * lowered speeds to 1/4 * added SPI Speed to constructor+ cleaned up variant.h * even slower speeds.... * add ST7796 * changes to get display centered+lib update * seperated from tbeam * forgot the simple scan case * lowered speeds to 1/4 * added SPI Speed to constructor+ cleaned up variant.h * even slower speeds.... * changed variant name to tbeam-displayshield * modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI? * try higher speeds + HSPI * cleanup of redundant code * refelct changes? * trunk fmt * testing touchscreen code * further testing * changed to sensorlib 0.3.1 * i broke it , dont know how to fix at the moment will investigate * add -1 functionality for touch IRQ * revert to working example? * it works.... is pressed was not working properly * working touchscreen but gestures not moving display * swap XY+ mirror X * cleanup + addition of defines for on screen keyboard and canned message module * removed debug lines, disabled bluetooth for now because of stack smashing protect failure * reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though * remove debug + add fixed baudrate for gps * fmt * revert NIMble * changed display library to meshtastic org * removed baudrate of 115200 and some commented out code * Correct spelling Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * display speed x10 * resolve conflicts * undo * revert speed increase CPU * add SCREEN_TRANSITION_FRAMERATE 5 * spi speed increase of the display * using the original touchscreen implementation * removal of H file line * add USE_ST7796 to missing places * removed is pressed + interrupt * revert changes of settings.json * update to screen.cpp * test identification of CST226 and CST328 * Update src/configuration.h typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * made changes to detection because it was completely wrong, CST226SE has 2 posible adresses * add merge queue * try vars * kerning in yaml. * update comment * lint etc * touching to check grandfathering * explicit ignores * add WIP for Unit C6L (#7433) * add WIP for Unit C6L * adapt to new config structure * Add c6l BLE and screen support (#7991) * Minor c6l fix * Move out of PRIVATE_HW --------- Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <Xaositek@users.noreply.github.com> Co-authored-by: Markus <Links2004@users.noreply.github.com> * Update Adafruit BusIO to v1.17.3 (#8018) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/checkout action to v5 (#8020) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/setup-python action to v6 (#8023) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#8025) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update actions/download-artifact action to v5 (#8021) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix init for InputEvent (#8015) * Automated version bumps (#8028) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Allow Left / Right Events for selection and improve encoder responsives (#8016) * Allow Left / Right Events for selection and improve encoder responsives * add define for ROTARY_DELAY * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * (resubmission) Manual GitHub actions to allow building one target or arch (#7997) * Reset the modified files * Fix some changes * Fix some changes * Trunk. That is all. --------- Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> * BaseUI Show/Hide Frame Functionality (#7382) * Rename System Frame (from Memory) in code base * Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames * Move Region Picker into submenu * Tweak wording for Send Position vs Node Info if the device has GPS * Update actions/checkout action to v5 (#8031) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/download-artifact action to v5 (#8032) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/setup-python action to v6 (#8033) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Phone GPS display on Position Screen for BaseUI (#7875) * Phone GPS display on Position Screen This is a PR to show when a phone shares GPS location with the node so you can reliably know what coordinate is being shared with the Mesh. * Merge pull request #8004 from compumike/compumike/debug-heap-add-free-heap-debugging-to-all-log-lines When `DEBUG_HEAP` is defined, add free heap bytes to every log line in `RedirectablePrint::log_to_serial` * Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu> * Auto-favorite remote admin node * Merge pull request #7873 from compumike/compumike/client-base-role Add `CLIENT_BASE` role: `ROUTER` for favorites, `CLIENT` otherwise (for attic/roof nodes!) * Fixes * BaseUI Updates (#7787) * Account for low resolution wide screen OLEDs * Allow picking of Device Role and new Display Formatter for Device Role * Add remainder of client roles to display formatter * Don't update the role unless you pick a value * Mascots are fun * Fix warnings during compile time * Improve some menus * Mascots need to work everywhere * Update Chirpy image * Fix Trunk * Update protobufs * Add date to Clock screen * Analog clocks love dates too * Finalize date moves for analog clock * Added Last Coordinate counter to Position screen (#7865) Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors. * Fix * Portduino config refactor (#7796) * Start portduino_config refactor * refactor GPIOs to new portduino_config * More portduino_config work * More conversion to portduino_config * Finish portduino_config transition * trunk * yaml output work * Simplify the GPIO config * Trunk * updated shebang to use a more standard path for bash (#7922) Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com> * Show GPS Date properly in drawCommonHeader (#7887) * Commit good code that is sustainable * Fix new build errors * BaseUI Updates (#7787) * Account for low resolution wide screen OLEDs * Allow picking of Device Role and new Display Formatter for Device Role * Add remainder of client roles to display formatter * Don't update the role unless you pick a value * Mascots are fun * Fix warnings during compile time * Improve some menus * Mascots need to work everywhere * Update Chirpy image * Fix Trunk * Update protobufs * Add date to Clock screen * Analog clocks love dates too * Finalize date moves for analog clock * Add formatting and menu picking for other GPS format options (#7974) * Add back options for other GPS format options * Rename variables and don't overlap elements * Fix default value * Should probably add a menu while I'm here! * Shorten names just a bit to fit on screens * Fix off by one * Labels try to make things better * Missed a label * Update protobufs (#8038) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add formatting and menu picking for other GPS format options (#7974) * Add back options for other GPS format options * Rename variables and don't overlap elements * Fix default value * Should probably add a menu while I'm here! * Shorten names just a bit to fit on screens * Fix off by one * Labels try to make things better * Missed a label * Add a new GPS model CM121. (#7852) * Add a new GPS model CM121. * Add CM121 to Unicore. * Trunk fixes, remove unneded NMEA lines --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * (resubmission) Manual GitHub actions to allow building one target or arch (#7997) * Reset the modified files * Fix some changes * Fix some changes * Trunk. That is all. --------- Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> * PPA: Enable Ubuntu 25.10 (questing) (#7940) * Update Protobuf usage, add MLS, fix clock (#8041) * Update protobufs (#8045) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix icon * C6l fixes (#8047) * fix build with HAS_TELEMETRY 0 (#8051) * Make sure to ACK ACKs/replies if next-hop routing is used (#8052) * Make sure to ACK ACKs/replies if next-hop routing is used To stop their retransmissions; hop limit of 0 is enough * Update src/mesh/ReliableRouter.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * move HTTP contentTypes to Flash - saves 768 Bytes of RAM (#8055) * Use `lora.use_preset` config to get name (#8057) * Update RadioLib to v7.3.0 (#8065) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix Rotary Encoder Button (#8001) this fixes the Rotary Encoder Button, currenlty its not working at all. Currently the action `ROTARY_ACTION_PRESSED` is only triggerd with a IRQ on RISING, which results in nothing since the function detects the "not longer" pressed button --> no action. the `ROTARY_ACTION_PRESSED` implementation needs to be called on both edges (on press and release of the button) changing the interupt setting to `CHANGE` fixes the problem. * Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) * Update platformio.ini * Remove some more extraneous lines * Add heltec_v4 board. (#7845) * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Upgrade trunk (#8078) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * portduino bump to fix gpiod bug (#8083) An earlier portduino causes problems with initializing gpiod lines. This pulls in the fix. * Handle ext. notification module things even if not enabled (#8089) * tlora-pager wake on button, and kb backlight toggling (#8090) * Try-fix: Unstick that PhoneAPI state (#8091) Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Also pull a deviceID from esp32c6 devices (#8092) * Remove line from BLE pin screen, to make pin readible on tiny screens * Fix build errors (#8067) * Heltec V4 is 16mb * Clear lasttoradio on BLE disconnect (#8095) * On disconnect, clear the lastToRadio buffer * Move it, bucko! * Revert "Fix build errors (#8067)" This reverts commit d998f70b5633e8b2f88823cfb73761625bbc3423. * Automated version bumps (#8100) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Upgrade trunk (#8094) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update Adafruit BusIO to v1.17.4 (#8098) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Add three expansion screens for heltec mesh solar. (#7995) * Add three expansion screens for heltec mesh solar. * delete whitespace Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * delete whitespace Update variants/nrf52840/heltec_mesh_solar/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Trunk --------- Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Dane Evans <dane@goneepic.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <Xaositek@users.noreply.github.com> Co-authored-by: Markus <Links2004@users.noreply.github.com> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> Co-authored-by: Markus <974709+Links2004@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com> Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Michael <michael.overhorst@gmail.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Trent V. <trenton.vanderwert@gmail.com> Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
2025-11-27 13:18:52 +01:00
build_flags = ${esp32_base.build_flags}
ESP32: Initial sort variants by platform (#7340)
2025-07-19 19:41:59 -04:00
-D TBEAM_V10
-I variants/esp32/tbeam
Fix for PSRAM detection on ESP32-S3R8 and t-beam (#6504) * remove duplicate HAS_LP5562 introduced by #6422 * T190 PSRAM fix * all the boards with a ESP32-S3R8 * T-beam V1.1 PSRAM
2025-04-07 01:27:46 +00:00
-DBOARD_HAS_PSRAM
-mfix-esp32-psram-cache-issue
ESP32: Initial sort variants by platform (#7340)
2025-07-19 19:41:59 -04:00
upload_speed = 921600
adding support for the ST7796 + creating a new variant of the T-beam (#6575) * remove duplicate HAS_LP5562 introduced by #6422 * add ST7796 * changes to get display centered+lib update * seperated from tbeam * forgot the simple scan case * lowered speeds to 1/4 * added SPI Speed to constructor+ cleaned up variant.h * even slower speeds.... * add ST7796 * changes to get display centered+lib update * seperated from tbeam * forgot the simple scan case * lowered speeds to 1/4 * added SPI Speed to constructor+ cleaned up variant.h * even slower speeds.... * changed variant name to tbeam-displayshield * modified variant.h and merged ini file+testing on lower spi frequency for the lora module, display shield pumps out EMI? * try higher speeds + HSPI * cleanup of redundant code * refelct changes? * trunk fmt * testing touchscreen code * further testing * changed to sensorlib 0.3.1 * i broke it , dont know how to fix at the moment will investigate * add -1 functionality for touch IRQ * revert to working example? * it works.... is pressed was not working properly * working touchscreen but gestures not moving display * swap XY+ mirror X * cleanup + addition of defines for on screen keyboard and canned message module * removed debug lines, disabled bluetooth for now because of stack smashing protect failure * reverted the revert #6640 + increased speed, bleutooth is stable now on reconnection cold booth etc , GPS is still not working though * remove debug + add fixed baudrate for gps * fmt * revert NIMble * changed display library to meshtastic org * removed baudrate of 115200 and some commented out code * Correct spelling Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * display speed x10 * resolve conflicts * undo * revert speed increase CPU * add SCREEN_TRANSITION_FRAMERATE 5 * spi speed increase of the display * using the original touchscreen implementation * removal of H file line * add USE_ST7796 to missing places * removed is pressed + interrupt * revert changes of settings.json * update to screen.cpp * test identification of CST226 and CST328 * Update src/configuration.h typo Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * made changes to detection because it was completely wrong, CST226SE has 2 posible adresses * add merge queue * try vars * kerning in yaml. * update comment * lint etc * touching to check grandfathering * explicit ignores * add WIP for Unit C6L (#7433) * add WIP for Unit C6L * adapt to new config structure * Add c6l BLE and screen support (#7991) * Minor c6l fix * Move out of PRIVATE_HW --------- Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <Xaositek@users.noreply.github.com> Co-authored-by: Markus <Links2004@users.noreply.github.com> * Update Adafruit BusIO to v1.17.3 (#8018) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/checkout action to v5 (#8020) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/setup-python action to v6 (#8023) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Upgrade trunk (#8025) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update actions/download-artifact action to v5 (#8021) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix init for InputEvent (#8015) * Automated version bumps (#8028) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Allow Left / Right Events for selection and improve encoder responsives (#8016) * Allow Left / Right Events for selection and improve encoder responsives * add define for ROTARY_DELAY * T-Lora Pager: Support LR1121 and SX1280 models (#7956) * T-Lora Pager: Support LR1121 and SX1280 models * Remove ifdefs * (resubmission) Manual GitHub actions to allow building one target or arch (#7997) * Reset the modified files * Fix some changes * Fix some changes * Trunk. That is all. --------- Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> * BaseUI Show/Hide Frame Functionality (#7382) * Rename System Frame (from Memory) in code base * Create menu options to Show/Hide frames: Node Lists, Bearings, Position, LoRa, Clock and Favorites frames * Move Region Picker into submenu * Tweak wording for Send Position vs Node Info if the device has GPS * Update actions/checkout action to v5 (#8031) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/download-artifact action to v5 (#8032) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Update actions/setup-python action to v6 (#8033) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Phone GPS display on Position Screen for BaseUI (#7875) * Phone GPS display on Position Screen This is a PR to show when a phone shares GPS location with the node so you can reliably know what coordinate is being shared with the Mesh. * Merge pull request #8004 from compumike/compumike/debug-heap-add-free-heap-debugging-to-all-log-lines When `DEBUG_HEAP` is defined, add free heap bytes to every log line in `RedirectablePrint::log_to_serial` * Feature: Seamless Cross-Preset Communication via UDP Multicast Bridging (#7753) * Added compatibility between nodes on different Presets through `Mesh via UDP` * Optimize multicast handling and channel mapping - FloodingRouter: remove redundant UDP-encrypted rebroadcast suppression. - Router: guard multicast fallback with HAS_UDP_MULTICAST and map fallback-decoded packets to the local default channel via isDefaultChannel() - UdpMulticastHandler: set transport_mechanism only after successful decode * trunk fmt * Move setting transport mechanism. --------- Co-authored-by: GUVWAF <thijs@havinga.eu> * Auto-favorite remote admin node * Merge pull request #7873 from compumike/compumike/client-base-role Add `CLIENT_BASE` role: `ROUTER` for favorites, `CLIENT` otherwise (for attic/roof nodes!) * Fixes * BaseUI Updates (#7787) * Account for low resolution wide screen OLEDs * Allow picking of Device Role and new Display Formatter for Device Role * Add remainder of client roles to display formatter * Don't update the role unless you pick a value * Mascots are fun * Fix warnings during compile time * Improve some menus * Mascots need to work everywhere * Update Chirpy image * Fix Trunk * Update protobufs * Add date to Clock screen * Analog clocks love dates too * Finalize date moves for analog clock * Added Last Coordinate counter to Position screen (#7865) Adding a counter to show the last time a GPS coordinate was detected to ensure the user is aware how long since the coordinate updated or to identify any errors. * Fix * Portduino config refactor (#7796) * Start portduino_config refactor * refactor GPIOs to new portduino_config * More portduino_config work * More conversion to portduino_config * Finish portduino_config transition * trunk * yaml output work * Simplify the GPIO config * Trunk * updated shebang to use a more standard path for bash (#7922) Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com> * Show GPS Date properly in drawCommonHeader (#7887) * Commit good code that is sustainable * Fix new build errors * BaseUI Updates (#7787) * Account for low resolution wide screen OLEDs * Allow picking of Device Role and new Display Formatter for Device Role * Add remainder of client roles to display formatter * Don't update the role unless you pick a value * Mascots are fun * Fix warnings during compile time * Improve some menus * Mascots need to work everywhere * Update Chirpy image * Fix Trunk * Update protobufs * Add date to Clock screen * Analog clocks love dates too * Finalize date moves for analog clock * Add formatting and menu picking for other GPS format options (#7974) * Add back options for other GPS format options * Rename variables and don't overlap elements * Fix default value * Should probably add a menu while I'm here! * Shorten names just a bit to fit on screens * Fix off by one * Labels try to make things better * Missed a label * Update protobufs (#8038) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add formatting and menu picking for other GPS format options (#7974) * Add back options for other GPS format options * Rename variables and don't overlap elements * Fix default value * Should probably add a menu while I'm here! * Shorten names just a bit to fit on screens * Fix off by one * Labels try to make things better * Missed a label * Add a new GPS model CM121. (#7852) * Add a new GPS model CM121. * Add CM121 to Unicore. * Trunk fixes, remove unneded NMEA lines --------- Co-authored-by: Tom Fifield <tom@tomfifield.net> * (resubmission) Manual GitHub actions to allow building one target or arch (#7997) * Reset the modified files * Fix some changes * Fix some changes * Trunk. That is all. --------- Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> * PPA: Enable Ubuntu 25.10 (questing) (#7940) * Update Protobuf usage, add MLS, fix clock (#8041) * Update protobufs (#8045) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix icon * C6l fixes (#8047) * fix build with HAS_TELEMETRY 0 (#8051) * Make sure to ACK ACKs/replies if next-hop routing is used (#8052) * Make sure to ACK ACKs/replies if next-hop routing is used To stop their retransmissions; hop limit of 0 is enough * Update src/mesh/ReliableRouter.cpp Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * move HTTP contentTypes to Flash - saves 768 Bytes of RAM (#8055) * Use `lora.use_preset` config to get name (#8057) * Update RadioLib to v7.3.0 (#8065) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Fix Rotary Encoder Button (#8001) this fixes the Rotary Encoder Button, currenlty its not working at all. Currently the action `ROTARY_ACTION_PRESSED` is only triggerd with a IRQ on RISING, which results in nothing since the function detects the "not longer" pressed button --> no action. the `ROTARY_ACTION_PRESSED` implementation needs to be called on both edges (on press and release of the button) changing the interupt setting to `CHANGE` fixes the problem. * Add another seeed_xiao_nrf52840_kit build environment for I2C pinout (#8036) * Update platformio.ini * Remove some more extraneous lines * Add heltec_v4 board. (#7845) * add heltec_v4 board. * Update variants/esp32s3/heltec_v4/platformio.ini Co-authored-by: Austin <vidplace7@gmail.com> * Limit the maximum output power. * Trunk fixes Fixes formatting to match meshtastic trunk linter. * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Apply suggestion from @Copilot Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Upgrade trunk (#8078) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * portduino bump to fix gpiod bug (#8083) An earlier portduino causes problems with initializing gpiod lines. This pulls in the fix. * Handle ext. notification module things even if not enabled (#8089) * tlora-pager wake on button, and kb backlight toggling (#8090) * Try-fix: Unstick that PhoneAPI state (#8091) Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Also pull a deviceID from esp32c6 devices (#8092) * Remove line from BLE pin screen, to make pin readible on tiny screens * Fix build errors (#8067) * Heltec V4 is 16mb * Clear lasttoradio on BLE disconnect (#8095) * On disconnect, clear the lastToRadio buffer * Move it, bucko! * Revert "Fix build errors (#8067)" This reverts commit d998f70b5633e8b2f88823cfb73761625bbc3423. * Automated version bumps (#8100) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Upgrade trunk (#8094) Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> * Update Adafruit BusIO to v1.17.4 (#8098) Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> * Add three expansion screens for heltec mesh solar. (#7995) * Add three expansion screens for heltec mesh solar. * delete whitespace Update variants/nrf52840/heltec_mesh_solar/variant.h Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * delete whitespace Update variants/nrf52840/heltec_mesh_solar/platformio.ini Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Trunk --------- Signed-off-by: Trenton VanderWert <trenton.vanderwert@gmail.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Dane Evans <dane@goneepic.com> Co-authored-by: Austin <vidplace7@gmail.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Jason P <Xaositek@users.noreply.github.com> Co-authored-by: Markus <Links2004@users.noreply.github.com> Co-authored-by: renovate[bot] <29139614+renovate[bot]@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: vidplace7 <1779290+vidplace7@users.noreply.github.com> Co-authored-by: Markus <974709+Links2004@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: WillyJL <me@willyjl.dev> Co-authored-by: Tom <116762865+NomDeTom@users.noreply.github.com> Co-authored-by: Tom <116762865+Nestpebble@users.noreply.github.com> Co-authored-by: Jason P <applewiz@mac.com> Co-authored-by: HarukiToreda <116696711+HarukiToreda@users.noreply.github.com> Co-authored-by: Michael <michael.overhorst@gmail.com> Co-authored-by: GUVWAF <thijs@havinga.eu> Co-authored-by: Trent V. <trenton.vanderwert@gmail.com> Co-authored-by: Quency-D <55523105+Quency-D@users.noreply.github.com> Co-authored-by: Tom Fifield <tom@tomfifield.net> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com>
2025-11-27 13:18:52 +01:00
[env:tbeam-displayshield]
extends = env:tbeam
build_flags =
${env:tbeam.build_flags}
-D USE_ST7796
lib_deps =
${env:tbeam.lib_deps}
Renovate all the things (#8994)
2025-12-17 12:05:48 -05:00
# renovate: datasource=github-tags depName=meshtastic-st7796 packageName=meshtastic/st7796
https://github.com/meshtastic/st7796/archive/1.0.5.zip
# renovate: datasource=custom.pio depName=lewisxhe-SensorLib packageName=lewisxhe/library/SensorLib
Update lewisxhe/SensorLib to 0.3.3 (#9061)
2025-12-24 05:56:31 -05:00
lewisxhe/SensorLib@0.3.3
Reference in New Issue Copy Permalink