src/mesh/STM32WLE5JCInterface.h

#pragma once

#include "SX126xInterface.h"

#ifdef ARCH_STM32WL

/**
 * Our adapter for STM32WLE5JC radios
 */
class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>
{
  public:
    STM32WLE5JCInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,
                         RADIOLIB_PIN_TYPE busy);

    virtual bool init() override;
};

// https://github.com/Seeed-Studio/LoRaWan-E5-Node/blob/main/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c
static const float tcxoVoltage = 1.7;

/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/
 * Wio-E5 module ONLY transmits through RFO_HP
 * Receive: PA4=1, PA5=0
 * Transmit(high output power, SMPS mode): PA4=0, PA5=1 */
static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};

static const Module::RfSwitchMode_t rfswitch_table[4] = {
    {STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};

#endif // ARCH_STM32WL
Wio-e5 wip (#2265) * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * LittleFS compiles. Can't check with actual device. * make cppcheck happy again * Guard against accelerometer thread * Missed a spot * Upload via ST-LINK * Derive MAC address from UID * upload port * Trunk it * Guard it * Maybe fix the cache error on startup. * Latest RadioLib ref to fix SubGHZ * revert nasty Sub-GHz Hack * Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: GUVWAF <thijs@havinga.eu> 2023-06-01 07:14:55 -05:00			`#pragma once`

			`#include "SX126xInterface.h"`

			`#ifdef ARCH_STM32WL`

			`/**`
			`* Our adapter for STM32WLE5JC radios`
			`*/`
			`class STM32WLE5JCInterface : public SX126xInterface<STM32WLx>`
			`{`
			`public:`
			`STM32WLE5JCInterface(LockingArduinoHal *hal, RADIOLIB_PIN_TYPE cs, RADIOLIB_PIN_TYPE irq, RADIOLIB_PIN_TYPE rst,`
			`RADIOLIB_PIN_TYPE busy);`

			`virtual bool init() override;`
			`};`

			`// https://github.com/Seeed-Studio/LoRaWan-E5-Node/blob/main/Middlewares/Third_Party/SubGHz_Phy/stm32_radio_driver/radio_driver.c`
			`static const float tcxoVoltage = 1.7;`

			`/* https://wiki.seeedstudio.com/LoRa-E5_STM32WLE5JC_Module/`
			`* Wio-E5 module ONLY transmits through RFO_HP`
			`* Receive: PA4=1, PA5=0`
			`* Transmit(high output power, SMPS mode): PA4=0, PA5=1 */`
Make STM compile again and update toolchain. (#2960) * Make STM compile again and update toolchain. The binary is too big for the flash. WIP * Making progress with OSFS, still WIP * more progress, still too big. Adding RAK3172 to the equasion * Make STM compile again and update toolchain. The binary is too big for the flash. WIP * Making progress with OSFS, still WIP * more progress, still too big. Adding RAK3172 to the equasion * still too big * minimize build * trunk fmt * fix a couple of symbol clashes * trunk fmt * down to 101% with a release vs. debug build and omitting the flash strings * fix compilation * fix compilation once more * update protobufs linkage * - Toolchain updated - Fixed macro error * silence compiler warning note: do something about this assert... * new toolkit and fix Power.cpp * STM32WL make it fit (#4330) * Add option to exclude I2C parts The I2C hals and related code uses a significant amount of flash space and aren't required for a basic node. * Add option to disable Admin and NodeInfo modules Disabled by default in minimal build. This saves a significant amount of flash * Disable unused hals These use up significant flash * Add float support for printf for debugging Makes serial look nice for debugging * This breaks my build for some reason * These build flags can save a bit of flash * Don't disable NodeInfo and Admin modules in minimal build They fit in flash * Don't include printf float support by default Only useful for debugging --------- Co-authored-by: Adam Lawson <dev@goshawk22.uk> --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Adam Lawson <dev@goshawk22.uk> 2024-07-26 03:16:21 +02:00			`static const RADIOLIB_PIN_TYPE rfswitch_pins[5] = {PA4, PA5, RADIOLIB_NC, RADIOLIB_NC, RADIOLIB_NC};`
Wio-e5 wip (#2265) * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * Wio-e5 / STM32WL wip * Stubbing some FS stuff out * LittleFS compiles. Can't check with actual device. * make cppcheck happy again * Guard against accelerometer thread * Missed a spot * Upload via ST-LINK * Derive MAC address from UID * upload port * Trunk it * Guard it * Maybe fix the cache error on startup. * Latest RadioLib ref to fix SubGHZ * revert nasty Sub-GHz Hack * Boots and radio inits with RadioLib 6.0, LittleFS doesn't seem to work --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: GUVWAF <thijs@havinga.eu> 2023-06-01 07:14:55 -05:00
			`static const Module::RfSwitchMode_t rfswitch_table[4] = {`
			`{STM32WLx::MODE_IDLE, {LOW, LOW}}, {STM32WLx::MODE_RX, {HIGH, LOW}}, {STM32WLx::MODE_TX_HP, {LOW, HIGH}}, END_OF_MODE_TABLE};`

			`#endif // ARCH_STM32WL`