rbxii3/firmware
1
0
Fork 0
mirror of https://github.com/meshtastic/firmware.git synced 2025-12-21 18:22:32 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
no-arduino-strings
firmware/variants/wio-sdk-wm1110/platformio.ini

24 lines
1.1 KiB
INI
Raw Permalink Normal View History

Moar LR1110 Targets
2024-06-20 16:26:04 +02:00
; The black Wio-WM1110 Dev Kit with sensors and the WM1110 module
LR1110 support (#3013) * DOES NOT WORK * trunk * DOES NOT WORK * trunk * DOES NOT WORK * trunk * WIP: LR11x0 non functional interface code. Please don't expect a working firmware out of this! I don't know what i am doing! :-) * trunk fmt * use canon toolchain * update and fix radiolib dependency * Switch Radiolib back to GIT checkout * enable tcxo and fix startReceive * progress * Correct midjudgement on scope of build defines. * - enable peripheral power rail during startup init - fix portduino builds * add tracker pinout variant * update to radiolib 6.6.0 API (aka: godmode is not for mere mortals) * tracker is not so 'extra' any more --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-06-03 23:04:40 +02:00
[env:wio-sdk-wm1110]
extends = nrf52840_base
board = wio-sdk-wm1110
Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB
2024-06-20 09:47:07 -07:00
Fixes for #4395: nrf52 flash filesystem reliability (#4406) * bug #4184: fix config file loss due to filesystem write errors * Use SafeFile for atomic file writing (with xor checksum readback) * Write db.proto last because it could be the largest file on the FS (and less critical) * Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem) * generate a new critial fault if we encounter errors writing to flash either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE (depending on if the second write attempt worked) * reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure yet if we should bother on ESP32) * If we have to format the FS, make sure to preserve the oem.proto if it exists * add logLegacy() so old C code in libs can log via our logging * move filesList() to a better location (used only in developer builds) * Reformat with "trunk fmt" to match our coding conventions * for #4395: don't use .exists() to before attempting file open If a LFS filesystem is corrupted, .exists() can fail when a mere .open() attempt would have succeeded. Therefore better to do the .open() in hopes that we can read the file (in case we need to reformat to fix the FS). (Seen and confirmed in stress testing) * for #4395 more fixes, see below for details: * check for LFS assertion failures during file operations (needs customized lfs_util.h to provide suitable hooks) * Remove fsCheck() because checking filesystem by writing to it is very high risk, it makes likelyhood that we will be able to read the config protobufs quite low. * Update the LFS inside of adafruitnrf52 to 1.7.2 (from their old 1.6.1) to get the following fix: https://github.com/littlefs-project/littlefs/commit/97d8d5e96a7781596708664f18f2ea6c3a179330 * use disable_adafruit_usb.py now that we are (temporarily?) using a forked adafruit lib We need to reach inside the adafruit project and turn off USE_TINYUSB, just doing that from platformio.ini is no longer sufficient. Tested on a wio-sdk-wm1110 board (which is the only board that had this problem) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-13 04:45:39 -07:00
extra_scripts =
bin/platformio-custom.py
extra_scripts/disable_adafruit_usb.py
Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB
2024-06-20 09:47:07 -07:00
# Remove adafruit USB serial from the build (it is incompatible with using the ch340 serial chip on this board)
build_unflags = ${nrf52840_base:build_unflags} -DUSBCON -DUSE_TINYUSB
Moar LR1110 Targets
2024-06-20 16:26:04 +02:00
build_flags = ${nrf52840_base.build_flags} -Ivariants/wio-sdk-wm1110 -Isrc/platform/nrf52/softdevice -Isrc/platform/nrf52/softdevice/nrf52 -DWIO_WM1110
LR1110 support (#3013) * DOES NOT WORK * trunk * DOES NOT WORK * trunk * DOES NOT WORK * trunk * WIP: LR11x0 non functional interface code. Please don't expect a working firmware out of this! I don't know what i am doing! :-) * trunk fmt * use canon toolchain * update and fix radiolib dependency * Switch Radiolib back to GIT checkout * enable tcxo and fix startReceive * progress * Correct midjudgement on scope of build defines. * - enable peripheral power rail during startup init - fix portduino builds * add tracker pinout variant * update to radiolib 6.6.0 API (aka: godmode is not for mere mortals) * tracker is not so 'extra' any more --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-06-03 23:04:40 +02:00
-DGPS_POWER_TOGGLE ; comment this line to disable triple press function on the user button to turn off gps entirely.
Fixes for #4395: nrf52 flash filesystem reliability (#4406) * bug #4184: fix config file loss due to filesystem write errors * Use SafeFile for atomic file writing (with xor checksum readback) * Write db.proto last because it could be the largest file on the FS (and less critical) * Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem) * generate a new critial fault if we encounter errors writing to flash either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE (depending on if the second write attempt worked) * reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure yet if we should bother on ESP32) * If we have to format the FS, make sure to preserve the oem.proto if it exists * add logLegacy() so old C code in libs can log via our logging * move filesList() to a better location (used only in developer builds) * Reformat with "trunk fmt" to match our coding conventions * for #4395: don't use .exists() to before attempting file open If a LFS filesystem is corrupted, .exists() can fail when a mere .open() attempt would have succeeded. Therefore better to do the .open() in hopes that we can read the file (in case we need to reformat to fix the FS). (Seen and confirmed in stress testing) * for #4395 more fixes, see below for details: * check for LFS assertion failures during file operations (needs customized lfs_util.h to provide suitable hooks) * Remove fsCheck() because checking filesystem by writing to it is very high risk, it makes likelyhood that we will be able to read the config protobufs quite low. * Update the LFS inside of adafruitnrf52 to 1.7.2 (from their old 1.6.1) to get the following fix: https://github.com/littlefs-project/littlefs/commit/97d8d5e96a7781596708664f18f2ea6c3a179330 * use disable_adafruit_usb.py now that we are (temporarily?) using a forked adafruit lib We need to reach inside the adafruit project and turn off USE_TINYUSB, just doing that from platformio.ini is no longer sufficient. Tested on a wio-sdk-wm1110 board (which is the only board that had this problem) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-13 04:45:39 -07:00
-DCFG_TUD_CDC=0
Sync Wio lr1110 refresh with master (#4288) * Fix protobuf structs handling (#4140) * Fix protobuf structs handling * Log instead of assert --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * BLE based logging (#4146) * WIP log characteristic * Bluetooth logging plumbing * Characteristic * Callback * Check for nullptr * Esp32 bluetooth impl * Formatting * Add thread name and log level * Add settings guard * Remove comments * Field name * Fixes esp32 * Open it up * Whoops * Move va_end past our logic * Use `upload_protocol = esptool` as with the other heltec devices instead of `esp-builtin` (#4151) * Standardize lat/lon position logs (#4156) * Standardize lat/lon position logs * Missed sone and condensed logs * [create-pull-request] automated change (#4157) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Pause BLE logging during want_config flow (#4162) * Update NimBLE to 1.4.2 (#4163) * Implement replies for all telemetry types based on variant tag (#4164) * Implement replies for all telemetry types based on variant tag * Remove check for `ignoreRequest`: modules can set this, don't need to check --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Esptool is better * Explicitly set characteristic * fix INA3221 sensor (#4168) - pass wire to begin() - remove redundant setAddr() (already set in header) * Show compass on waypoint frame; clear when waypoint deleted (#4116) * Clear expired or deleted waypoint frame * Return 0 to CallbackObserver * Add a missing comment * Draw compass for waypoint frame * Display our own waypoints * [create-pull-request] automated change (#4171) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add semihosting support for nrf52 devices (#4137) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * fix my botched merge - keep board_level = extra flag for rak3631_dbg --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4174) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Display alerts (#4170) * Move static functions into Screen.h, show compass during calibration * Move to _fontHeight macro to avoid collision * Move some alert functions to new alert handler * Catch missed reboot code * ESP32 fixes * Bump esp8266-oled-ssd1306 * Fixes for when a device has no screen * Use new startAlert(char*) helper class * Add EINK bits back to alert handling * Add noop class for no-display devices --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Send file system manifest up on want_config (#4176) * Send file system manifest up on want_config * Platform specific methods * Helps to actually make the change * Clear * tell vscode, if formatting, use whatever our trunk formatter wants (#4186) without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * fix the build - would loop forever if there were no files to send (#4188) * Show owner.short_name on boot (and E-Ink sleep screen) (#4134) * Show owner.short_name on boot and sleep screen (on e-ink) * Update Screen.cpp - new line for short_name Boot screen short_name now below the region setting. Looks better on small screens. * Draw short_name on right --------- Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth. * correct xiao_ble build preventing sx1262 init (#4191) * Force a compile time failur if FromRadio or ToRadio get larger than (#4190) a BLE packet size. We are actually very close to this threshold so important to make sure we don't accidentally pass it. * Clear vector after complete config state (#4194) * Clear after complete config * Don't collect . entries * Log file name and size * [create-pull-request] automated change (#4200) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Make the logs Colorful! (#4199) * Squash needlessly static functions (#4183) * Trim extra vprintf and filter for unprintable characters * Deprecate Router Client role (and make it Client) (#4201) * [create-pull-request] automated change (#4205) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Move waypoint (#4202) * Move waypoint screen draw into the waypoint module * Get the observer set up for the waypoint screen draw * Static squashing: screen dimensions Macros moved back to Screen.cpp, as a band-aid until we eventually move all those static functions into the Screen class. * Move getCompassDiam into Screen class (supress compiler warnings) At this stage, the method is still static, because it's used by drawNodeInfo, which has no tidy reference to our screen instance. This is probably just another band-aid until these static functions all move. * Use new getCompassDiam function in AccelerometerThread * Properly gate display code in WaypointModule --------- Co-authored-by: Todd Herbert <herbert.todd@gmail.com> * Fix flakey phone api transition from file manifest to complete (#4209) * Try fix flakey phone api transition from file manifest to complete * Skip * enable colors in platformio serial monitor (#4217) * When talking via serial, encapsulate log messages in protobufs if necessary (#4187) * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * [create-pull-request] automated change (#4218) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Fix SHT41 support (#4222) * Add SHT41 Serial to I2c Detection Code On the Seeed Wio-WM1110 Dev Kit board, the SHT41 chip was being incorrectly detected as SHT31. This patch adds the necessary serial number for the SHT41 chip to be correctly detected. fixes meshtastic/firmware#4221 * Add missing sensor read for SHT41 * Typo fix in logs - mhz - MHz (#4225) As reported by karamo, a few different places in our logs had incorrect capitalization of MHz. fixes meshtastic/firmware#4126 * New new BLE logging characteristic with LogRecord protos (#4220) * New UUID * New log radio characteristic with LogRecord protobuf * LogRecord * Merge derp * How did you get there * Trunk * Fix length * Remove assert * minor cleanup proposal (#4169) * MESHTASTIC_EXCLUDE_WIFI and HAS_WIFI cleanup... Our code was checking HAS_WIFI and the new MESHTASTIC_EXCLUDE_WIFI flags in various places (even though EXCLUDE_WIFI forces HAS_WIFI to 0). Instead just check HAS_WIFI, only use EXCLUDE_WIFI inside configuration.h * cleanup: use HAS_NETWORKING instead of HAS_WIFI || HAS_ETHERNET We already had HAS_NETWORKING as flag in MQTT to mean 'we have tcpip'. Generallize that and move it into configuration.h so that we can use it elsewhere. * Use #pragma once, because supported by gcc and all modern compilers instead of #ifdef DOTHFILE_H etc... --------- Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * Add PowerMon support (#4155) * Turn off vscode cmake prompt - we don't use cmake on meshtastic * Add rak4631_dap variant for debugging with NanoDAP debug probe device. * The rak device can also run freertos (which is underneath nrf52 arduino) * Add semihosting support for nrf52840 devices Initial platformio.ini file only supports rak4630 Default to non TCP for the semihosting log output for now... Fixes https://github.com/meshtastic/firmware/issues/4135 * powermon WIP (for https://github.com/meshtastic/firmware/issues/4136 ) * oops - mean't to mark the _dbg variant as an 'extra' board. * powermon wip * Make serial port on wio-sdk-wm1110 board work By disabling the (inaccessible) adafruit USB * Instrument (radiolib only for now) lora for powermon per https://github.com/meshtastic/firmware/issues/4136 * powermon gps support https://github.com/meshtastic/firmware/issues/4136 * Add CPU deep and light sleep powermon states https://github.com/meshtastic/firmware/issues/4136 * Change the board/swversion bootstring so it is a new "structured" log msg. * powermon wip * add example script for getting esp S3 debugging working Not yet used but I didn't want these nasty tricks to get lost yet. * Add PowerMon reporting for screen and bluetooth pwr. * make power.powermon_enables config setting work. * update to latest protobufs * fix bogus shellcheck warning * make powermon optional (but default enabled because tiny and no runtime impact) * tell vscode, if formatting, use whatever our trunk formatter wants without this flag if the user has set some other formatter (clang) in their user level settings, it will be looking in the wrong directory for the clang options (we want the options in .trunk/clang) Note: formatOnSave is true in master, which means a bunch of our older files are non compliant and if you edit them it will generate lots of formatting related diffs. I guess I'll start letting that happen with my future commits ;-). * add PowerStress module * nrf52 arduino is built upon freertos, so let platformio debug it * don't accidentally try to Segger ICE if we are using another ICE * clean up RedirectablePrint::log so it doesn't have three very different implementations inline. * remove NoopPrint - it is no longer needed * when talking to API clients via serial, don't turn off log msgs instead encapsuate them * fix the build - would loop forever if there were no files to send * don't use Segger code if not talking to a Segger debugger * when encapsulating logs, make sure the strings always has nul terminators * nrf52 soft device will watchdog if you use ICE while BT on... so have debugger disable bluetooth. * Important to not print debug messages while writing to the toPhone scratch buffer * don't include newlines if encapsulating log records as protobufs * update to latest protobufs (needed for powermon goo) * PowerStress WIP * fix linter warning * Cleanup buffer * Merge hex for wm1110 target(s) * Only sdk * Sudo * Fix exclude macros (#4233) * fix MESHTASTIC_EXCLUDE_BLUETOOTH * fix HAS_SCREEN=0 * fix MESHTASTIC_EXCLUDE_GPS * fix typo in build-nrf52.sh (#4231) chmod is the command, '+x' is the argument. * Tidy Wireless Paper variant files (#4238) * Quick tidy of pins_arduino.h Matches requests made at https://github.com/meshtastic/firmware/pull/4226#discussion_r1664183480) * Tidy variant.h * Change deprecated ADC attenuation parameter From 11dB to 12dB. Resolves compiler warning. Allegly, no impact on function: `This is deprecated, it behaves the same as `ADC_ATTEN_DB_12` * Updated raspbian CI to update apt repository ahead of libbluetooth. (#4243) * Fix BLE logging on nrf52 (#4244) * allow ble logrecords to be fetched either by NOTIFY or INDICATE ble types This allows 'lossless' log reading. If client has requested INDICATE (rather than NOTIFY) each log record emitted via log() will have to fetched by the client device before the meshtastic node can continue. * Fix serious problem with nrf52 BLE logging. When doing notifies of LogRecords it is important to use the binary write routines - writing using the 'string' write won't work. Because protobufs can contain \0 nuls inside of them which if being parsed as a string will cause only a portion of the protobuf to be sent. I noticed this because some log messages were not getting through. --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * Fix build when HAS_NETWORKING is false on nrf52 (#4237) (tested on a rak4631 by setting HAS_ETHERNET false when shrinking image) * If `toPhoneQueue` is full, still increment `fromNum` to avoid client never getting packets (#4246) * Update to SoftDevice 7.3.0 for wio-sdk-wm1110 and wio-tracker-wm1110 (#4248) * Update variant.h * Update wio-tracker-wm1110.json * Update wio-sdk-wm1110.json * Update platformio.ini * Update platformio.ini * Add files via upload * Add files via upload * Update variant.h * Cleanup NRF s140 Softdevice variants (#4252) Note: This idea is originally from @caveman99 and should be credited as such. Submitting as a separate PR so the work in meshtastic/firmware#4148 can be a bit cleaner and Seeed boards can build while that work is ongoing. The nrf52 boards that depend on the v7 softdevice all use the same code and linker files. Rather than duplicate the code, keep it all together with the platform. * Remove tracker variant specific soft device headers (#4255) * [create-pull-request] automated change (#4247) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Add wio-sdk-wm1110 to build. (#4258) The wio-sdk-wm1110 is distinct from the wio-tracker-wm1110, with different platformio build options and pin config. This change adds the wio-sdk-wm1110 to the CI matrix so firmware is built as part of release. * fix python warning in uf2conf (#4235) the old regex worked but was technically incorrect. fixes: Generating NRF52 uf2 file /home/kevinh/development/meshtastic/firmware/bin/uf2conv.py:195: SyntaxWarning: invalid escape sequence '\s' words = re.split('\s+', line) Converting to uf2, output size: 1458688, start address: 0x26000 * Collect hex files and specifically wm1110 sdk * Skip dfu file for sdk (for now) * Helps if you remove the original clause * Add Heltec new boards. (#4226) * Add Heltec new boards * Update variant.h disable RTC by default * Add Heltec New boards * Add Heltec new boards * Update Heltec Mesh Node definition. * Update Heltec Vision Mater E290 * [create-pull-request] automated change (#4259) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * Trunk fmt * Fix macros * Move e290 to board level extra while CI is broken * Tell trunk to ignore bin folder * Fix missing * Update trunk.yaml, fix whitespace * Update trunk.yaml * Update build_raspbian_armv7l.yml --fix-missing * [create-pull-request] automated change (#4263) Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> * GPS Power State tidy-up (#4161) * Refactor GPSPowerState enum Identifies a case where the GPS hardware is awake, but an update is not yet desired * Change terminology * Clear old lock-time prediction on triple press * Use exponential smoothing to predict lock time * Rename averageLockTime to predictedLockTime * Attempt: Send PMREQ with duration 0 on MCU deep-sleep * Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep * Revert "Attempt 2: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 8b697cd2a445355dcfab5b33e0ce7a3128cab151. * Revert "Attempt: Send PMREQ with duration 0 on MCU deep-sleep" This reverts commit 9d29ec7603a88056b9115796b29b5023165a93bb. * Remove unused notifyGPSSleep Observable Handled with notifyDeepSleep, and enable() / disable() * WIP: simplify GPS power management An initial attempt only. * Honor #3e9e0fd * No-op when moving between GPS_IDLE and GPS_ACTIVE * Ensure U-blox GPS is awake to receive indefinite sleep command * Longer pause when waking U-blox to send sleep command * Actually implement soft and hard sleep.. * Dynamically estimate the threshold for GPS_HARDSLEEP * Fallback to GPS_HARDSLEEP, if GPS_SOFTSLEEP unsupported * Move "excessive search time" behavior to scheduler class * Minor logging adjustments * Promote log to warning * Gratuitous buffer clearing on boot * Fix inverted standby pin logic Specifically the standby pin for L76B, L76K and clones Discovered during T-Echo testing: totally broken function, probe method failing. * Remove redundant pin init Now handled by setPowerState * Replace max() with if statements Avoid those platform specific implementations.. * Trunk formatting New round of settings.json changes keep catching me out, have to remember to re-enable my "clang-format" for windows workaround. * Remove some asserts from setPowerState Original aim was to prevent sending a 0 second PMREQ to U-blox hardware as part of a timed sleep (GPS_HARDSLEEP, GPS_SOFTSLEEP). I'm not sure this is super important, and it feels tidier to just allow the 0 second sleeptime here, rather than fudge the sleeptime further up. * Fix an error determining whether GPS_SOFTSLEEP is supported * Clarify a log entry * Set PIN_STANDBY for MCU deep-sleep Required to reach TTGO's advertised 0.25mA sleep current for T-Echo. Without this change: ~6mA. * Optimize the shutdown current of RAK10701 to around 25uA (#4260) Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> * INA3221 sensor: use for bus voltage & environment metrics (#4215) * use INA3221 for bus voltage; fixes for telemetry variants - add to sensors available for environment telemetry (to report voltage/current) - add vars to define channels to use for battery voltage (for getBusVoltage) and environment metrics (default to CH1 for both) - write to the correct fields on the measurement struct depending on the measurement variant, and DRY up the sensor measurement collection code a bit - this might be suitable for a common implementation for the INA* sensors in a future PR... * formatting * derp --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com> * WM1110 SDK kit enter serial DFU and add deployment packages (#4266) * Switch default upload protocol to nrfutil so that pio generates zip deploy packages * Enter serial DFU on SDK board * Remove guard for DFU zip from SDK build * NRF_USE_SERIAL_DFU macro instead * Show specific frame when updating screen (#4264) * Updated setFrames in Screen.cpp Added code to attempt to revert back to the same frame that user was on prior to setFrame reload. * Space added Screen.cpp * Update Screen.cpp Make screen to revert to Frame 0 if the originally displayed frame is no longer there. * Update Screen.cpp Inserted boolean holdPosition into setFrames to indicate the requirement to stay on the same frame ( if =true) or else it will switch to new frame . Only Screen::handleStatusUpdate calls with setFrame(true). ( For Node Updates) All other types of updates call as before setFrame(), so it will change focus as needed. * Hold position, even if number of frames increases * Hold position, if handling an outgoing text message * Update Screen.cpp * Reverted chnages related to devicestate.has_rx_text_message * Reset to master * CannedMessages only handles routing packets when waiting for ACK Previously, this was calling Screen::setFrames at unexpected times * Gather position info about screen frames while regenerating * Make admin module observable Notify only when relevant. Currently: only to handle remove_nodenum. * Optionally specify which frame to focus when setFrames runs * UIFrameEvent uses enum instead of multiple booleans * Allow modules to request their own frame to be focussed This is done internally by calling MeshModule::requestFocus() Easier this way, insteady of passing the info in the UIFrameEvent: * Modules don't always know whether they should be focussed until after the UIFrameEvent has been raised, in dramFrame * Don't have to pass reference to module instance as parameter though several methods * E-Ink screensaver uses FOCUS_PRESERVE Previously, it had its own basic implementation of this. * Spelling: regional variant * trunk * Fix HAS_SCREEN guarding * More HAS_SCREEN guarding --------- Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: slash-bit <v-b2@live.com> * Move up telemetry defaults to every 30 minutes (#4274) * Don't send node info interrogation when ch. util is >25% (#4273) * Moar LR1110 Targets * update SD_FLASH_SIZE to 0x27000 (#4232) The 7.3.0 softdevice needs the extra 1000 :) * Fix spacing. --------- Co-authored-by: Mike <mikhael.skvortsov@gmail.com> Co-authored-by: Ben Meadors <benmmeadors@gmail.com> Co-authored-by: Mike G <mkgin@users.noreply.github.com> Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com> Co-authored-by: thebentern <9000580+thebentern@users.noreply.github.com> Co-authored-by: GUVWAF <78759985+GUVWAF@users.noreply.github.com> Co-authored-by: Warren Guy <5602790+warrenguy@users.noreply.github.com> Co-authored-by: todd-herbert <herbert.todd@gmail.com> Co-authored-by: geeksville <kevinh@geeksville.com> Co-authored-by: Jonathan Bennett <jbennett@incomsystems.biz> Co-authored-by: Alexander <156134901+Dorn8010@users.noreply.github.com> Co-authored-by: Thomas Göttgens <tgoettgens@gmail.com> Co-authored-by: quimnut <github@dopegoat.com> Co-authored-by: Manuel <71137295+mverch67@users.noreply.github.com> Co-authored-by: Agent Blu, 006 <blu006@ucr.edu> Co-authored-by: Mark Trevor Birss <markbirss@gmail.com> Co-authored-by: Aaron.Lee <32860565+Heltec-Aaron-Lee@users.noreply.github.com> Co-authored-by: Daniel.Cao <144674500+DanielCao0@users.noreply.github.com> Co-authored-by: BIST <77391720+slash-bit@users.noreply.github.com> Co-authored-by: slash-bit <v-b2@live.com>
2024-07-14 09:38:19 +08:00
board_build.ldscript = src/platform/nrf52/nrf52840_s140_v7.ld
LR1110 support (#3013) * DOES NOT WORK * trunk * DOES NOT WORK * trunk * DOES NOT WORK * trunk * WIP: LR11x0 non functional interface code. Please don't expect a working firmware out of this! I don't know what i am doing! :-) * trunk fmt * use canon toolchain * update and fix radiolib dependency * Switch Radiolib back to GIT checkout * enable tcxo and fix startReceive * progress * Correct midjudgement on scope of build defines. * - enable peripheral power rail during startup init - fix portduino builds * add tracker pinout variant * update to radiolib 6.6.0 API (aka: godmode is not for mere mortals) * tracker is not so 'extra' any more --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-06-03 23:04:40 +02:00
build_src_filter = ${nrf52_base.build_src_filter} +<../variants/wio-sdk-wm1110>
Fixes for #4395: nrf52 flash filesystem reliability (#4406) * bug #4184: fix config file loss due to filesystem write errors * Use SafeFile for atomic file writing (with xor checksum readback) * Write db.proto last because it could be the largest file on the FS (and less critical) * Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem) * generate a new critial fault if we encounter errors writing to flash either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE (depending on if the second write attempt worked) * reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure yet if we should bother on ESP32) * If we have to format the FS, make sure to preserve the oem.proto if it exists * add logLegacy() so old C code in libs can log via our logging * move filesList() to a better location (used only in developer builds) * Reformat with "trunk fmt" to match our coding conventions * for #4395: don't use .exists() to before attempting file open If a LFS filesystem is corrupted, .exists() can fail when a mere .open() attempt would have succeeded. Therefore better to do the .open() in hopes that we can read the file (in case we need to reformat to fix the FS). (Seen and confirmed in stress testing) * for #4395 more fixes, see below for details: * check for LFS assertion failures during file operations (needs customized lfs_util.h to provide suitable hooks) * Remove fsCheck() because checking filesystem by writing to it is very high risk, it makes likelyhood that we will be able to read the config protobufs quite low. * Update the LFS inside of adafruitnrf52 to 1.7.2 (from their old 1.6.1) to get the following fix: https://github.com/littlefs-project/littlefs/commit/97d8d5e96a7781596708664f18f2ea6c3a179330 * use disable_adafruit_usb.py now that we are (temporarily?) using a forked adafruit lib We need to reach inside the adafruit project and turn off USE_TINYUSB, just doing that from platformio.ini is no longer sufficient. Tested on a wio-sdk-wm1110 board (which is the only board that had this problem) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-13 04:45:39 -07:00
;debug_tool = jlink
debug_tool = stlink
nrf52 soft device will watchdog if you use ICE while BT on... (#4189) so have debugger disable bluetooth.
2024-06-28 04:48:55 -07:00
; No need to reflash if the binary hasn't changed
Fixes for #4395: nrf52 flash filesystem reliability (#4406) * bug #4184: fix config file loss due to filesystem write errors * Use SafeFile for atomic file writing (with xor checksum readback) * Write db.proto last because it could be the largest file on the FS (and less critical) * Don't keep a tmp file around while writing db.proto (because too big to fit two files in the filesystem) * generate a new critial fault if we encounter errors writing to flash either CriticalErrorCode_FLASH_CORRUPTION_RECOVERABLE or CriticalErrorCode_FLASH_CORRUPTION_UNRECOVERABLE (depending on if the second write attempt worked) * reformat the filesystem if we detect it is corrupted (then rewrite our config files) (only on nrf52 - not sure yet if we should bother on ESP32) * If we have to format the FS, make sure to preserve the oem.proto if it exists * add logLegacy() so old C code in libs can log via our logging * move filesList() to a better location (used only in developer builds) * Reformat with "trunk fmt" to match our coding conventions * for #4395: don't use .exists() to before attempting file open If a LFS filesystem is corrupted, .exists() can fail when a mere .open() attempt would have succeeded. Therefore better to do the .open() in hopes that we can read the file (in case we need to reformat to fix the FS). (Seen and confirmed in stress testing) * for #4395 more fixes, see below for details: * check for LFS assertion failures during file operations (needs customized lfs_util.h to provide suitable hooks) * Remove fsCheck() because checking filesystem by writing to it is very high risk, it makes likelyhood that we will be able to read the config protobufs quite low. * Update the LFS inside of adafruitnrf52 to 1.7.2 (from their old 1.6.1) to get the following fix: https://github.com/littlefs-project/littlefs/commit/97d8d5e96a7781596708664f18f2ea6c3a179330 * use disable_adafruit_usb.py now that we are (temporarily?) using a forked adafruit lib We need to reach inside the adafruit project and turn off USE_TINYUSB, just doing that from platformio.ini is no longer sufficient. Tested on a wio-sdk-wm1110 board (which is the only board that had this problem) --------- Co-authored-by: Ben Meadors <benmmeadors@gmail.com>
2024-08-13 04:45:39 -07:00
; If not set we will default to uploading over serial (first it forces bootloader entry by talking 1200bps to cdcacm)
;upload_protocol = nrfutil
;upload_protocol = stlink
Reference in New Issue Copy Permalink